target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h

   1 /*
   2  * Broadcom SiliconBackplane hardware register definitions.
   3  *
   4  * Copyright 2006, Broadcom Corporation
   5  * All Rights Reserved.
   6  *
   7  * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8  * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9  * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10  * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11  *
  12  * $Id: sbconfig.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $
  13  */
  14
  15 #ifndef _SBCONFIG_H
  16 #define _SBCONFIG_H
  17
  18 /* cpp contortions to concatenate w/arg prescan */
  19 #ifndef PAD
  20 #define _PADLINE(line)  pad ## line
  21 #define _XSTR(line)     _PADLINE(line)
  22 #define PAD             _XSTR(__LINE__)
  23 #endif
  24
  25 /*
  26  * SiliconBackplane Address Map.
  27  * All regions may not exist on all chips.
  28  */
  29 #define SB_SDRAM_BASE           0x00000000      /* Physical SDRAM */
  30 #define SB_PCI_MEM              0x08000000      /* Host Mode sb2pcitranslation0 (64 MB) */
  31 #define SB_PCI_MEM_SZ           (64 * 1024 * 1024)
  32 #define SB_PCI_CFG              0x0c000000      /* Host Mode sb2pcitranslation1 (64 MB) */
  33 #define SB_SDRAM_SWAPPED        0x10000000      /* Byteswapped Physical SDRAM */
  34 #define SB_ENUM_BASE            0x18000000      /* Enumeration space base */
  35 #define SB_ENUM_LIM             0x18010000      /* Enumeration space limit */
  36
  37 #define SB_FLASH2               0x1c000000      /* Flash Region 2 (region 1 shadowed here) */
  38 #define SB_FLASH2_SZ            0x02000000      /* Size of Flash Region 2 */
  39
  40 #define SB_EXTIF_BASE           0x1f000000      /* External Interface region base address */
  41 #define SB_FLASH1               0x1fc00000      /* MIPS Flash Region 1 */
  42 #define SB_FLASH1_SZ            0x00400000      /* MIPS Size of Flash Region 1 */
  43
  44 #define SB_ROM                  0x20000000      /* ARM ROM */
  45 #define SB_SRAM2                0x80000000      /* ARM SRAM Region 2 */
  46 #define SB_ARM_FLASH1           0xffff0000      /* ARM Flash Region 1 */
  47 #define SB_ARM_FLASH1_SZ        0x00010000      /* ARM Size of Flash Region 1 */
  48
  49 #define SB_PCI_DMA              0x40000000      /* Client Mode sb2pcitranslation2 (1 GB) */
  50 #define SB_PCI_DMA_SZ           0x40000000      /* Client Mode sb2pcitranslation2 size in bytes */
  51 #define SB_PCIE_DMA_L32         0x00000000      /* PCIE Client Mode sb2pcitranslation2
  52                                                  * (2 ZettaBytes), low 32 bits
  53                                                  */
  54 #define SB_PCIE_DMA_H32         0x80000000      /* PCIE Client Mode sb2pcitranslation2
  55                                                  * (2 ZettaBytes), high 32 bits
  56                                                  */
  57 #define SB_EUART                (SB_EXTIF_BASE + 0x00800000)
  58 #define SB_LED                  (SB_EXTIF_BASE + 0x00900000)
  59
  60
  61 /* enumeration space related defs */
  62 #define SB_CORE_SIZE            0x1000          /* each core gets 4Kbytes for registers */
  63 #define SB_MAXCORES             ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
  64 #define SB_MAXFUNCS             4               /* max. # functions per core */
  65 #define SBCONFIGOFF             0xf00           /* core sbconfig regs are top 256bytes of regs */
  66 #define SBCONFIGSIZE            256             /* sizeof (sbconfig_t) */
  67
  68 /* mips address */
  69 #define SB_EJTAG                0xff200000      /* MIPS EJTAG space (2M) */
  70
  71 /*
  72  * Sonics Configuration Space Registers.
  73  */
  74 #define SBIPSFLAG               0x08
  75 #define SBTPSFLAG               0x18
  76 #define SBTMERRLOGA             0x48            /* sonics >= 2.3 */
  77 #define SBTMERRLOG              0x50            /* sonics >= 2.3 */
  78 #define SBADMATCH3              0x60
  79 #define SBADMATCH2              0x68
  80 #define SBADMATCH1              0x70
  81 #define SBIMSTATE               0x90
  82 #define SBINTVEC                0x94
  83 #define SBTMSTATELOW            0x98
  84 #define SBTMSTATEHIGH           0x9c
  85 #define SBBWA0                  0xa0
  86 #define SBIMCONFIGLOW           0xa8
  87 #define SBIMCONFIGHIGH          0xac
  88 #define SBADMATCH0              0xb0
  89 #define SBTMCONFIGLOW           0xb8
  90 #define SBTMCONFIGHIGH          0xbc
  91 #define SBBCONFIG               0xc0
  92 #define SBBSTATE                0xc8
  93 #define SBACTCNFG               0xd8
  94 #define SBFLAGST                0xe8
  95 #define SBIDLOW                 0xf8
  96 #define SBIDHIGH                0xfc
  97
  98 /* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have
  99  * a few registers *below* that line. I think it would be very confusing to try
 100  * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here,
 101  */
 102
 103 #define SBIMERRLOGA             0xea8
 104 #define SBIMERRLOG              0xeb0
 105 #define SBTMPORTCONNID0         0xed8
 106 #define SBTMPORTLOCK0           0xef8
 107
 108 #ifndef _LANGUAGE_ASSEMBLY
 109
 110 typedef volatile struct _sbconfig {
 111         uint32  PAD[2];
 112         uint32  sbipsflag;              /* initiator port ocp slave flag */
 113         uint32  PAD[3];
 114         uint32  sbtpsflag;              /* target port ocp slave flag */
 115         uint32  PAD[11];
 116         uint32  sbtmerrloga;            /* (sonics >= 2.3) */
 117         uint32  PAD;
 118         uint32  sbtmerrlog;             /* (sonics >= 2.3) */
 119         uint32  PAD[3];
 120         uint32  sbadmatch3;             /* address match3 */
 121         uint32  PAD;
 122         uint32  sbadmatch2;             /* address match2 */
 123         uint32  PAD;
 124         uint32  sbadmatch1;             /* address match1 */
 125         uint32  PAD[7];
 126         uint32  sbimstate;              /* initiator agent state */
 127         uint32  sbintvec;               /* interrupt mask */
 128         uint32  sbtmstatelow;           /* target state */
 129         uint32  sbtmstatehigh;          /* target state */
 130         uint32  sbbwa0;                 /* bandwidth allocation table0 */
 131         uint32  PAD;
 132         uint32  sbimconfiglow;          /* initiator configuration */
 133         uint32  sbimconfighigh;         /* initiator configuration */
 134         uint32  sbadmatch0;             /* address match0 */
 135         uint32  PAD;
 136         uint32  sbtmconfiglow;          /* target configuration */
 137         uint32  sbtmconfighigh;         /* target configuration */
 138         uint32  sbbconfig;              /* broadcast configuration */
 139         uint32  PAD;
 140         uint32  sbbstate;               /* broadcast state */
 141         uint32  PAD[3];
 142         uint32  sbactcnfg;              /* activate configuration */
 143         uint32  PAD[3];
 144         uint32  sbflagst;               /* current sbflags */
 145         uint32  PAD[3];
 146         uint32  sbidlow;                /* identification */
 147         uint32  sbidhigh;               /* identification */
 148 } sbconfig_t;
 149
 150 #endif /* _LANGUAGE_ASSEMBLY */
 151
 152 /* sbipsflag */
 153 #define SBIPS_INT1_MASK         0x3f            /* which sbflags get routed to mips interrupt 1 */
 154 #define SBIPS_INT1_SHIFT        0
 155 #define SBIPS_INT2_MASK         0x3f00          /* which sbflags get routed to mips interrupt 2 */
 156 #define SBIPS_INT2_SHIFT        8
 157 #define SBIPS_INT3_MASK         0x3f0000        /* which sbflags get routed to mips interrupt 3 */
 158 #define SBIPS_INT3_SHIFT        16
 159 #define SBIPS_INT4_MASK         0x3f000000      /* which sbflags get routed to mips interrupt 4 */
 160 #define SBIPS_INT4_SHIFT        24
 161
 162 /* sbtpsflag */
 163 #define SBTPS_NUM0_MASK         0x3f            /* interrupt sbFlag # generated by this core */
 164 #define SBTPS_F0EN0             0x40            /* interrupt is always sent on the backplane */
 165
 166 /* sbtmerrlog */
 167 #define SBTMEL_CM               0x00000007      /* command */
 168 #define SBTMEL_CI               0x0000ff00      /* connection id */
 169 #define SBTMEL_EC               0x0f000000      /* error code */
 170 #define SBTMEL_ME               0x80000000      /* multiple error */
 171
 172 /* sbimstate */
 173 #define SBIM_PC                 0xf             /* pipecount */
 174 #define SBIM_AP_MASK            0x30            /* arbitration policy */
 175 #define SBIM_AP_BOTH            0x00            /* use both timeslaces and token */
 176 #define SBIM_AP_TS              0x10            /* use timesliaces only */
 177 #define SBIM_AP_TK              0x20            /* use token only */
 178 #define SBIM_AP_RSV             0x30            /* reserved */
 179 #define SBIM_IBE                0x20000         /* inbanderror */
 180 #define SBIM_TO                 0x40000         /* timeout */
 181 #define SBIM_BY                 0x01800000      /* busy (sonics >= 2.3) */
 182 #define SBIM_RJ                 0x02000000      /* reject (sonics >= 2.3) */
 183
 184 /* sbtmstatelow */
 185 #define SBTML_RESET             0x1             /* reset */
 186 #define SBTML_REJ_MASK          0x6             /* reject */
 187 #define SBTML_REJ_SHIFT         1
 188 #define SBTML_CLK               0x10000         /* clock enable */
 189 #define SBTML_FGC               0x20000         /* force gated clocks on */
 190 #define SBTML_FL_MASK           0x3ffc0000      /* core-specific flags */
 191 #define SBTML_PE                0x40000000      /* pme enable */
 192 #define SBTML_BE                0x80000000      /* bist enable */
 193
 194 /* sbtmstatehigh */
 195 #define SBTMH_SERR              0x1             /* serror */
 196 #define SBTMH_INT               0x2             /* interrupt */
 197 #define SBTMH_BUSY              0x4             /* busy */
 198 #define SBTMH_TO                0x00000020      /* timeout (sonics >= 2.3) */
 199 #define SBTMH_FL_MASK           0x1fff0000      /* core-specific flags */
 200 #define SBTMH_DMA64             0x10000000      /* supports DMA with 64-bit addresses */
 201 #define SBTMH_GCR               0x20000000      /* gated clock request */
 202 #define SBTMH_BISTF             0x40000000      /* bist failed */
 203 #define SBTMH_BISTD             0x80000000      /* bist done */
 204
 205
 206 /* sbbwa0 */
 207 #define SBBWA_TAB0_MASK         0xffff          /* lookup table 0 */
 208 #define SBBWA_TAB1_MASK         0xffff          /* lookup table 1 */
 209 #define SBBWA_TAB1_SHIFT        16
 210
 211 /* sbimconfiglow */
 212 #define SBIMCL_STO_MASK         0x7             /* service timeout */
 213 #define SBIMCL_RTO_MASK         0x70            /* request timeout */
 214 #define SBIMCL_RTO_SHIFT        4
 215 #define SBIMCL_CID_MASK         0xff0000        /* connection id */
 216 #define SBIMCL_CID_SHIFT        16
 217
 218 /* sbimconfighigh */
 219 #define SBIMCH_IEM_MASK         0xc             /* inband error mode */
 220 #define SBIMCH_TEM_MASK         0x30            /* timeout error mode */
 221 #define SBIMCH_TEM_SHIFT        4
 222 #define SBIMCH_BEM_MASK         0xc0            /* bus error mode */
 223 #define SBIMCH_BEM_SHIFT        6
 224
 225 /* sbadmatch0 */
 226 #define SBAM_TYPE_MASK          0x3             /* address type */
 227 #define SBAM_AD64               0x4             /* reserved */
 228 #define SBAM_ADINT0_MASK        0xf8            /* type0 size */
 229 #define SBAM_ADINT0_SHIFT       3
 230 #define SBAM_ADINT1_MASK        0x1f8           /* type1 size */
 231 #define SBAM_ADINT1_SHIFT       3
 232 #define SBAM_ADINT2_MASK        0x1f8           /* type2 size */
 233 #define SBAM_ADINT2_SHIFT       3
 234 #define SBAM_ADEN               0x400           /* enable */
 235 #define SBAM_ADNEG              0x800           /* negative decode */
 236 #define SBAM_BASE0_MASK         0xffffff00      /* type0 base address */
 237 #define SBAM_BASE0_SHIFT        8
 238 #define SBAM_BASE1_MASK         0xfffff000      /* type1 base address for the core */
 239 #define SBAM_BASE1_SHIFT        12
 240 #define SBAM_BASE2_MASK         0xffff0000      /* type2 base address for the core */
 241 #define SBAM_BASE2_SHIFT        16
 242
 243 /* sbtmconfiglow */
 244 #define SBTMCL_CD_MASK          0xff            /* clock divide */
 245 #define SBTMCL_CO_MASK          0xf800          /* clock offset */
 246 #define SBTMCL_CO_SHIFT         11
 247 #define SBTMCL_IF_MASK          0xfc0000        /* interrupt flags */
 248 #define SBTMCL_IF_SHIFT         18
 249 #define SBTMCL_IM_MASK          0x3000000       /* interrupt mode */
 250 #define SBTMCL_IM_SHIFT         24
 251
 252 /* sbtmconfighigh */
 253 #define SBTMCH_BM_MASK          0x3             /* busy mode */
 254 #define SBTMCH_RM_MASK          0x3             /* retry mode */
 255 #define SBTMCH_RM_SHIFT         2
 256 #define SBTMCH_SM_MASK          0x30            /* stop mode */
 257 #define SBTMCH_SM_SHIFT         4
 258 #define SBTMCH_EM_MASK          0x300           /* sb error mode */
 259 #define SBTMCH_EM_SHIFT         8
 260 #define SBTMCH_IM_MASK          0xc00           /* int mode */
 261 #define SBTMCH_IM_SHIFT         10
 262
 263 /* sbbconfig */
 264 #define SBBC_LAT_MASK           0x3             /* sb latency */
 265 #define SBBC_MAX0_MASK          0xf0000         /* maxccntr0 */
 266 #define SBBC_MAX0_SHIFT         16
 267 #define SBBC_MAX1_MASK          0xf00000        /* maxccntr1 */
 268 #define SBBC_MAX1_SHIFT         20
 269
 270 /* sbbstate */
 271 #define SBBS_SRD                0x1             /* st reg disable */
 272 #define SBBS_HRD                0x2             /* hold reg disable */
 273
 274 /* sbidlow */
 275 #define SBIDL_CS_MASK           0x3             /* config space */
 276 #define SBIDL_AR_MASK           0x38            /* # address ranges supported */
 277 #define SBIDL_AR_SHIFT          3
 278 #define SBIDL_SYNCH             0x40            /* sync */
 279 #define SBIDL_INIT              0x80            /* initiator */
 280 #define SBIDL_MINLAT_MASK       0xf00           /* minimum backplane latency */
 281 #define SBIDL_MINLAT_SHIFT      8
 282 #define SBIDL_MAXLAT            0xf000          /* maximum backplane latency */
 283 #define SBIDL_MAXLAT_SHIFT      12
 284 #define SBIDL_FIRST             0x10000         /* this initiator is first */
 285 #define SBIDL_CW_MASK           0xc0000         /* cycle counter width */
 286 #define SBIDL_CW_SHIFT          18
 287 #define SBIDL_TP_MASK           0xf00000        /* target ports */
 288 #define SBIDL_TP_SHIFT          20
 289 #define SBIDL_IP_MASK           0xf000000       /* initiator ports */
 290 #define SBIDL_IP_SHIFT          24
 291 #define SBIDL_RV_MASK           0xf0000000      /* sonics backplane revision code */
 292 #define SBIDL_RV_SHIFT          28
 293 #define SBIDL_RV_2_2            0x00000000      /* version 2.2 or earlier */
 294 #define SBIDL_RV_2_3            0x10000000      /* version 2.3 */
 295
 296 /* sbidhigh */
 297 #define SBIDH_RC_MASK           0x000f          /* revision code */
 298 #define SBIDH_RCE_MASK          0x7000          /* revision code extension field */
 299 #define SBIDH_RCE_SHIFT         8
 300 #define SBCOREREV(sbidh) \
 301         ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
 302 #define SBIDH_CC_MASK           0x8ff0          /* core code */
 303 #define SBIDH_CC_SHIFT          4
 304 #define SBIDH_VC_MASK           0xffff0000      /* vendor code */
 305 #define SBIDH_VC_SHIFT          16
 306
 307 #define SB_COMMIT               0xfd8           /* update buffered registers value */
 308
 309 /* vendor codes */
 310 #define SB_VEND_BCM             0x4243          /* Broadcom's SB vendor code */
 311
 312 /* core codes */
 313 #define SB_NODEV                0x700           /* Invalid coreid */
 314 #define SB_CC                   0x800           /* chipcommon core */
 315 #define SB_ILINE20              0x801           /* iline20 core */
 316 #define SB_SDRAM                0x803           /* sdram core */
 317 #define SB_PCI                  0x804           /* pci core */
 318 #define SB_MIPS                 0x805           /* mips core */
 319 #define SB_ENET                 0x806           /* enet mac core */
 320 #define SB_CODEC                0x807           /* v90 codec core */
 321 #define SB_USB                  0x808           /* usb 1.1 host/device core */
 322 #define SB_ADSL                 0x809           /* ADSL core */
 323 #define SB_ILINE100             0x80a           /* iline100 core */
 324 #define SB_IPSEC                0x80b           /* ipsec core */
 325 #define SB_PCMCIA               0x80d           /* pcmcia core */
 326 #define SB_SDIOD                SB_PCMCIA       /* pcmcia core has sdio device */
 327 #define SB_SOCRAM               0x80e           /* internal memory core */
 328 #define SB_MEMC                 0x80f           /* memc sdram core */
 329 #define SB_EXTIF                0x811           /* external interface core */
 330 #define SB_D11                  0x812           /* 802.11 MAC core */
 331 #define SB_MIPS33               0x816           /* mips3302 core */
 332 #define SB_USB11H               0x817           /* usb 1.1 host core */
 333 #define SB_USB11D               0x818           /* usb 1.1 device core */
 334 #define SB_USB20H               0x819           /* usb 2.0 host core */
 335 #define SB_USB20D               0x81a           /* usb 2.0 device core */
 336 #define SB_SDIOH                0x81b           /* sdio host core */
 337 #define SB_ROBO                 0x81c           /* roboswitch core */
 338 #define SB_ATA100               0x81d           /* parallel ATA core */
 339 #define SB_SATAXOR              0x81e           /* serial ATA & XOR DMA core */
 340 #define SB_GIGETH               0x81f           /* gigabit ethernet core */
 341 #define SB_PCIE                 0x820           /* pci express core */
 342 #define SB_MIMO                 0x821           /* MIMO phy core */
 343 #define SB_SRAMC                0x822           /* SRAM controller core */
 344 #define SB_MINIMAC              0x823           /* MINI MAC/phy core */
 345 #define SB_ARM11                0x824           /* ARM 1176 core */
 346 #define SB_ARM7                 0x825           /* ARM 7tdmi core */
 347
 348 #define SB_CC_IDX               0               /* chipc, when present, is always core 0 */
 349
 350 /* Not really related to Silicon Backplane, but a couple of software
 351  * conventions for the use the flash space:
 352  */
 353
 354 /* Minumum amount of flash we support */
 355 #define FLASH_MIN               0x00020000      /* Minimum flash size */
 356
 357 /* A boot/binary may have an embedded block that describes its size  */
 358 #define BISZ_OFFSET             0x3e0           /* At this offset into the binary */
 359 #define BISZ_MAGIC              0x4249535a      /* Marked with this value: 'BISZ' */
 360 #define BISZ_MAGIC_IDX          0               /* Word 0: magic */
 361 #define BISZ_TXTST_IDX          1               /*      1: text start */
 362 #define BISZ_TXTEND_IDX         2               /*      2: text start */
 363 #define BISZ_DATAST_IDX         3               /*      3: text start */
 364 #define BISZ_DATAEND_IDX        4               /*      4: text start */
 365 #define BISZ_BSSST_IDX          5               /*      5: text start */
 366 #define BISZ_BSSEND_IDX         6               /*      6: text start */
 367 #define BISZ_SIZE               7               /* descriptor size in 32-bit intergers */
 368
 369 #endif  /* _SBCONFIG_H */