target/linux/ifxmips/files/include/asm-mips/danube/ifx_ssc.h

   1 /*
   2  * ifx_ssc.h defines some data sructures used in ifx_ssc.c
   3  *
   4  * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
   5  *
   6  *
   7  */
   8
   9 #ifndef __IFX_SSC_H
  10 #define __IFX_SSC_H
  11 #ifdef __KERNEL__
  12 #include <asm/danube/ifx_ssc_defines.h>
  13 #endif //__KERNEL__
  14
  15 #define PORT_CNT                1       // assume default value
  16
  17 /* symbolic constants to be used in SSC routines */
  18
  19 // ### TO DO: bad performance
  20 #define IFX_SSC_TXFIFO_ITL      1
  21 #define IFX_SSC_RXFIFO_ITL      1
  22
  23 struct ifx_ssc_statistics {
  24         unsigned int abortErr;  /* abort error */
  25         unsigned int modeErr;   /* master/slave mode error */
  26         unsigned int txOvErr;   /* TX Overflow error */
  27         unsigned int txUnErr;   /* TX Underrun error */
  28         unsigned int rxOvErr;   /* RX Overflow error */
  29         unsigned int rxUnErr;   /* RX Underrun error */
  30         unsigned int rxBytes;
  31         unsigned int txBytes;
  32 };
  33
  34 struct ifx_ssc_hwopts {
  35         unsigned int AbortErrDetect:1;  /* Abort Error detection (in slave mode) */
  36         unsigned int rxOvErrDetect:1;   /* Receive Overflow Error detection */
  37         unsigned int rxUndErrDetect:1;  /* Receive Underflow Error detection */
  38         unsigned int txOvErrDetect:1;   /* Transmit Overflow Error detection */
  39         unsigned int txUndErrDetect:1;  /* Transmit Underflow Error detection */
  40         unsigned int echoMode:1;        /* Echo mode */
  41         unsigned int loopBack:1;        /* Loopback mode */
  42         unsigned int idleValue:1;       /* Idle value */
  43         unsigned int clockPolarity:1;   /* Idle clock is high or low */
  44         unsigned int clockPhase:1;      /* Tx on trailing or leading edge */
  45         unsigned int headingControl:1;  /* LSB first or MSB first */
  46         unsigned int dataWidth:6;       /* from 2 up to 32 bits */
  47         unsigned int masterSelect:1;    /* Master or Slave mode */
  48         unsigned int modeRxTx:2;        /* rx/tx mode */
  49         unsigned int gpoCs:8;   /* choose outputs to use for chip select */
  50         unsigned int gpoInv:8;  /* invert GPO outputs */
  51 };
  52
  53 struct ifx_ssc_frm_opts {
  54         bool FrameEnable;       // SFCON.SFEN
  55         unsigned int DataLength;        // SFCON.DLEN
  56         unsigned int PauseLength;       // SFCON.PLEN
  57         unsigned int IdleData;  // SFCON.IDAT
  58         unsigned int IdleClock; // SFCON.ICLK
  59         bool StopAfterPause;    // SFCON.STOP
  60 };
  61
  62 struct ifx_ssc_frm_status {
  63         bool DataBusy;          // SFSTAT.DBSY
  64         bool PauseBusy;         // SFSTAT.PBSY
  65         unsigned int DataCount; // SFSTAT.DCNT
  66         unsigned int PauseCount;        // SFSTAT.PCNT
  67         bool EnIntAfterData;    // SFCON.IBEN
  68         bool EnIntAfterPause;   // SFCON.IAEN
  69 };
  70
  71 typedef struct {
  72         char *buf;
  73         size_t len;
  74 } ifx_ssc_buf_item_t;
  75
  76 // data structures for batch execution
  77 typedef union {
  78         struct {
  79                 bool save_options;
  80         } init;
  81         ifx_ssc_buf_item_t read;
  82         ifx_ssc_buf_item_t write;
  83         ifx_ssc_buf_item_t rd_wr;
  84         unsigned int set_baudrate;
  85         struct ifx_ssc_frm_opts set_frm;
  86         unsigned int set_gpo;
  87         struct ifx_ssc_hwopts set_hwopts;
  88 } ifx_ssc_batch_cmd_param;
  89
  90 struct ifx_ssc_batch_list {
  91         unsigned int cmd;
  92         ifx_ssc_batch_cmd_param cmd_param;
  93         struct ifx_ssc_batch_list *next;
  94 };
  95
  96 #ifdef __KERNEL__
  97 #define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
  98
  99 struct ifx_ssc_port {
 100         unsigned long mapbase;
 101         struct ifx_ssc_hwopts opts;
 102         struct ifx_ssc_statistics stats;
 103         struct ifx_ssc_frm_status frm_status;
 104         struct ifx_ssc_frm_opts frm_opts;
 105         /* wait queue for ifx_ssc_read() */
 106         wait_queue_head_t rwait, pwait;
 107         int port_nr;
 108         char port_is_open;      /* exclusive open  - boolean */
 109 //      int no_of_bits; /* number of _valid_ bits */
 110 //      int elem_size; /* shift for element (no of bytes)*/
 111         /* buffer and pointers to the read/write position */
 112         char *rxbuf;            /* buffer for RX */
 113         char *rxbuf_end;        /* buffer end pointer for RX */
 114         volatile char *rxbuf_ptr;       /* buffer write pointer for RX */
 115         char *txbuf;            /* buffer for TX */
 116         char *txbuf_end;        /* buffer end pointer for TX */
 117         volatile char *txbuf_ptr;       /* buffer read pointer for TX */
 118         unsigned int baud;
 119         /* each channel has its own interrupts */
 120         /* (transmit/receive/error/frame) */
 121         unsigned int txirq, rxirq, errirq, frmirq;
 122 };
 123 /* default values for SSC configuration */
 124 // values of CON
 125 #define IFX_SSC_DEF_IDLE_DATA       1   /* enable */
 126 #define IFX_SSC_DEF_BYTE_VALID_CTL  1   /* enable */
 127 #define IFX_SSC_DEF_DATA_WIDTH      32  /* bits */
 128 #define IFX_SSC_DEF_ABRT_ERR_DETECT 0   /* disable */
 129 #define IFX_SSC_DEF_RO_ERR_DETECT   1   /* enable */
 130 #define IFX_SSC_DEF_RU_ERR_DETECT   0   /* disable */
 131 #define IFX_SSC_DEF_TO_ERR_DETECT   0   /* disable */
 132 #define IFX_SSC_DEF_TU_ERR_DETECT   0   /* disable */
 133 #define IFX_SSC_DEF_LOOP_BACK       0   /* disable */
 134 #define IFX_SSC_DEF_ECHO_MODE       0   /* disable */
 135 #define IFX_SSC_DEF_CLOCK_POLARITY  0   /* low */
 136 #define IFX_SSC_DEF_CLOCK_PHASE     1   /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
 137 #define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
 138 #define IFX_SSC_DEF_MODE_RXTX       IFX_SSC_MODE_RXTX
 139 // other values
 140 #define IFX_SSC_DEF_MASTERSLAVE     IFX_SSC_MASTER_MODE /* master */
 141 #ifdef CONFIG_USE_EMULATOR
 142 #define IFX_SSC_DEF_BAUDRATE        10000
 143 #else
 144 #define IFX_SSC_DEF_BAUDRATE        2000000
 145 #endif
 146 #define IFX_SSC_DEF_RMC             0x10
 147
 148 #define IFX_SSC_DEF_TXFIFO_FL       8
 149 #define IFX_SSC_DEF_RXFIFO_FL       1
 150
 151 #if 1                           //TODO
 152 #define IFX_SSC_DEF_GPO_CS          0x3 /* no chip select */
 153 #define IFX_SSC_DEF_GPO_INV         0   /* no chip select */
 154 #else
 155 #error "what is ur Chip Select???"
 156 #endif
 157 #define IFX_SSC_DEF_SFCON           0   /* no serial framing */
 158 #if 0
 159 #define IFX_SSC_DEF_IRNEN           IFX_SSC_T_BIT | /* enable all int's */\
 160                                     IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
 161 #endif
 162 #define IFX_SSC_DEF_IRNEN           IFX_SSC_T_BIT | /* enable all int's */\
 163                                     IFX_SSC_R_BIT | IFX_SSC_E_BIT
 164 #endif /* __KERNEL__ */
 165
 166 // batch execution commands
 167 #define IFX_SSC_BATCH_CMD_INIT          1
 168 #define IFX_SSC_BATCH_CMD_READ          2
 169 #define IFX_SSC_BATCH_CMD_WRITE         3
 170 #define IFX_SSC_BATCH_CMD_RD_WR         4
 171 #define IFX_SSC_BATCH_CMD_SET_BAUDRATE  5
 172 #define IFX_SSC_BATCH_CMD_SET_HWOPTS    6
 173 #define IFX_SSC_BATCH_CMD_SET_FRM       7
 174 #define IFX_SSC_BATCH_CMD_SET_GPO       8
 175 #define IFX_SSC_BATCH_CMD_FIFO_FLUSH    9
 176 //#define IFX_SSC_BATCH_CMD_
 177 //#define IFX_SSC_BATCH_CMD_
 178 #define IFX_SSC_BATCH_CMD_END_EXEC      0
 179
 180 /* Macros to configure SSC hardware */
 181 /* headingControl: */
 182 #define IFX_SSC_LSB_FIRST            0
 183 #define IFX_SSC_MSB_FIRST            1
 184 /* dataWidth: */
 185 #define IFX_SSC_MIN_DATA_WIDTH       2
 186 #define IFX_SSC_MAX_DATA_WIDTH       32
 187 /* master/slave mode select */
 188 #define IFX_SSC_MASTER_MODE          1
 189 #define IFX_SSC_SLAVE_MODE           0
 190 /* rx/tx mode */
 191 // ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
 192 #define IFX_SSC_MODE_RXTX            0
 193 #define IFX_SSC_MODE_RX              1
 194 #define IFX_SSC_MODE_TX              2
 195 #define IFX_SSC_MODE_OFF             3
 196 #define IFX_SSC_MODE_MASK            IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
 197
 198 /* GPO values */
 199 #define IFX_SSC_MAX_GPO_OUT          7
 200
 201 #define IFX_SSC_RXREQ_BLOCK_SIZE     32768
 202
 203 /***********************/
 204 /* defines for ioctl's */
 205 /***********************/
 206 #define IFX_SSC_IOCTL_MAGIC     'S'
 207 /* read out the statistics */
 208 #define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
 209 /* clear the statistics */
 210 #define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
 211 /* set the baudrate */
 212 #define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
 213 /* get the current baudrate */
 214 #define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
 215 /* set hardware options */
 216 #define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
 217 /* get the current hardware options */
 218 #define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
 219 /* set transmission mode */
 220 #define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
 221 /* get the current transmission mode */
 222 #define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
 223 /* abort transmission */
 224 #define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
 225 #define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
 226
 227 /* set general purpose outputs */
 228 #define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
 229 /* clear general purpose outputs */
 230 #define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
 231 /* get general purpose outputs */
 232 #define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
 233
 234 /*** serial framing ***/
 235 /* get status of serial framing */
 236 #define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
 237 /* get counter reload values and control bits */
 238 #define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
 239 /* set counter reload values and control bits */
 240 #define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
 241
 242 /*** batch execution ***/
 243 /* do batch execution */
 244 #define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
 245
 246 #ifdef __KERNEL__
 247 // routines from ifx_ssc.c
 248 // ### TO DO
 249 /* kernel interface for read and write */
 250 ssize_t ifx_ssc_kread (int, char *, size_t);
 251 ssize_t ifx_ssc_kwrite (int, const char *, size_t);
 252
 253 #ifdef CONFIG_IFX_VP_KERNEL_TEST
 254 void ifx_ssc_tc (void);
 255 #endif // CONFIG_IFX_VP_KERNEL_TEST
 256
 257 #endif //__KERNEL__
 258 #endif // __IFX_SSC_H