target/linux/brcm-2.4/patches/001-bcm47xx.patch

   1 Index: linux-2.4.35.4/arch/mips/config-shared.in
   2 ===================================================================
   3 --- linux-2.4.35.4.orig/arch/mips/config-shared.in      2007-12-15 05:19:53.151449966 +0100
   4 +++ linux-2.4.35.4/arch/mips/config-shared.in   2007-12-15 05:20:13.936634447 +0100
   5 @@ -208,6 +208,14 @@
   6     fi
   7     define_bool CONFIG_MIPS_RTC y
   8  fi
   9 +dep_bool 'Support for Broadcom MIPS-based boards' CONFIG_MIPS_BRCM $CONFIG_EXPERIMENTAL
  10 +dep_bool 'Support for Broadcom BCM947XX' CONFIG_BCM947XX $CONFIG_MIPS_BRCM
  11 +if [ "$CONFIG_BCM947XX" = "y" ] ; then
  12 +   bool '    Support for Broadcom BCM4710' CONFIG_BCM4710
  13 +   bool '    Support for Broadcom BCM4310' CONFIG_BCM4310
  14 +   bool '    Support for Broadcom BCM4704' CONFIG_BCM4704
  15 +   bool '    Support for Broadcom BCM5365' CONFIG_BCM5365
  16 +fi
  17  bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
  18  bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226
  19  bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229
  20 @@ -229,6 +237,11 @@
  21  define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
  22
  23  #
  24 +# Provide an option for a default kernel command line
  25 +#
  26 +string 'Default kernel command string' CONFIG_CMDLINE ""
  27 +
  28 +#
  29  # Select some configuration options automatically based on user selections.
  30  #
  31  if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
  32 @@ -554,6 +567,12 @@
  33     define_bool CONFIG_SWAP_IO_SPACE_L y
  34     define_bool CONFIG_BOOT_ELF32 y
  35  fi
  36 +if [ "$CONFIG_BCM947XX" = "y" ] ; then
  37 +   define_bool CONFIG_PCI y
  38 +   define_bool CONFIG_NONCOHERENT_IO y
  39 +   define_bool CONFIG_NEW_TIME_C y
  40 +   define_bool CONFIG_NEW_IRQ y
  41 +fi
  42  if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
  43     define_bool CONFIG_ARC32 y
  44     define_bool CONFIG_ARC_MEMORY y
  45 @@ -1042,7 +1061,11 @@
  46
  47  bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
  48  bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG
  49 -bool 'Remote GDB kernel debugging' CONFIG_KGDB
  50 +if [ "$CONFIG_BCM947XX" = "y" ] ; then
  51 +       bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
  52 +else
  53 +       bool 'Remote GDB kernel debugging' CONFIG_KGDB
  54 +fi
  55  dep_bool '  Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB
  56  if [ "$CONFIG_KGDB" = "y" ]; then
  57     define_bool CONFIG_DEBUG_INFO y
  58 Index: linux-2.4.35.4/arch/mips/kernel/cpu-probe.c
  59 ===================================================================
  60 --- linux-2.4.35.4.orig/arch/mips/kernel/cpu-probe.c    2007-12-15 05:19:44.862977633 +0100
  61 +++ linux-2.4.35.4/arch/mips/kernel/cpu-probe.c 2007-12-15 05:20:13.944634901 +0100
  62 @@ -162,7 +162,7 @@
  63
  64  static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
  65  {
  66 -       switch (c->processor_id & 0xff00) {
  67 +       switch (c->processor_id & PRID_IMP_MASK) {
  68         case PRID_IMP_R2000:
  69                 c->cputype = CPU_R2000;
  70                 c->isa_level = MIPS_CPU_ISA_I;
  71 @@ -172,7 +172,7 @@
  72                 c->tlbsize = 64;
  73                 break;
  74         case PRID_IMP_R3000:
  75 -               if ((c->processor_id & 0xff) == PRID_REV_R3000A)
  76 +               if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A)
  77                         if (cpu_has_confreg())
  78                                 c->cputype = CPU_R3081E;
  79                         else
  80 @@ -187,12 +187,12 @@
  81                 break;
  82         case PRID_IMP_R4000:
  83                 if (read_c0_config() & CONF_SC) {
  84 -                       if ((c->processor_id & 0xff) >= PRID_REV_R4400)
  85 +                       if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
  86                                 c->cputype = CPU_R4400PC;
  87                         else
  88                                 c->cputype = CPU_R4000PC;
  89                 } else {
  90 -                       if ((c->processor_id & 0xff) >= PRID_REV_R4400)
  91 +                       if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
  92                                 c->cputype = CPU_R4400SC;
  93                         else
  94                                 c->cputype = CPU_R4000SC;
  95 @@ -438,7 +438,7 @@
  96  static inline void cpu_probe_mips(struct cpuinfo_mips *c)
  97  {
  98         decode_config1(c);
  99 -       switch (c->processor_id & 0xff00) {
 100 +       switch (c->processor_id & PRID_IMP_MASK) {
 101         case PRID_IMP_4KC:
 102                 c->cputype = CPU_4KC;
 103                 c->isa_level = MIPS_CPU_ISA_M32;
 104 @@ -479,10 +479,10 @@
 105  {
 106         decode_config1(c);
 107         c->options |= MIPS_CPU_PREFETCH;
 108 -       switch (c->processor_id & 0xff00) {
 109 +       switch (c->processor_id & PRID_IMP_MASK) {
 110         case PRID_IMP_AU1_REV1:
 111         case PRID_IMP_AU1_REV2:
 112 -               switch ((c->processor_id >> 24) & 0xff) {
 113 +               switch ((c->processor_id >> 24) & PRID_REV_MASK) {
 114                 case 0:
 115                         c->cputype = CPU_AU1000;
 116                         break;
 117 @@ -510,10 +510,34 @@
 118         }
 119  }
 120
 121 +static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
 122 +{
 123 +       decode_config1(c);
 124 +       c->options |= MIPS_CPU_PREFETCH;
 125 +       switch (c->processor_id & PRID_IMP_MASK) {
 126 +       case PRID_IMP_BCM4710:
 127 +                       c->cputype = CPU_BCM4710;
 128 +                       c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
 129 +                                                               MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
 130 +                       c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 131 +                       break;
 132 +       case PRID_IMP_4KC:
 133 +       case PRID_IMP_BCM3302:
 134 +                       c->cputype = CPU_BCM3302;
 135 +                       c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
 136 +                                                               MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
 137 +                       c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 138 +                       break;
 139 +       default:
 140 +                       c->cputype = CPU_UNKNOWN;
 141 +                       break;
 142 +       }
 143 +}
 144 +
 145  static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
 146  {
 147         decode_config1(c);
 148 -       switch (c->processor_id & 0xff00) {
 149 +       switch (c->processor_id & PRID_IMP_MASK) {
 150         case PRID_IMP_SB1:
 151                 c->cputype = CPU_SB1;
 152                 c->isa_level = MIPS_CPU_ISA_M64;
 153 @@ -535,7 +559,7 @@
 154  static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
 155  {
 156         decode_config1(c);
 157 -       switch (c->processor_id & 0xff00) {
 158 +       switch (c->processor_id & PRID_IMP_MASK) {
 159         case PRID_IMP_SR71000:
 160                 c->cputype = CPU_SR71000;
 161                 c->isa_level = MIPS_CPU_ISA_M64;
 162 @@ -560,7 +584,7 @@
 163         c->cputype      = CPU_UNKNOWN;
 164
 165         c->processor_id = read_c0_prid();
 166 -       switch (c->processor_id & 0xff0000) {
 167 +       switch (c->processor_id & PRID_COMP_MASK) {
 168
 169         case PRID_COMP_LEGACY:
 170                 cpu_probe_legacy(c);
 171 @@ -571,6 +595,9 @@
 172         case PRID_COMP_ALCHEMY:
 173                 cpu_probe_alchemy(c);
 174                 break;
 175 +       case PRID_COMP_BROADCOM:
 176 +               cpu_probe_broadcom(c);
 177 +               break;
 178         case PRID_COMP_SIBYTE:
 179                 cpu_probe_sibyte(c);
 180                 break;
 181 Index: linux-2.4.35.4/arch/mips/kernel/head.S
 182 ===================================================================
 183 --- linux-2.4.35.4.orig/arch/mips/kernel/head.S 2007-12-15 05:19:44.866977862 +0100
 184 +++ linux-2.4.35.4/arch/mips/kernel/head.S      2007-12-15 05:20:13.944634901 +0100
 185 @@ -28,12 +28,20 @@
 186  #include <asm/mipsregs.h>
 187  #include <asm/stackframe.h>
 188
 189 +#ifdef CONFIG_BCM4710
 190 +#undef eret
 191 +#define eret nop; nop; eret
 192 +#endif
 193 +
 194                 .text
 195 +               j       kernel_entry
 196 +               nop
 197 +
 198                 /*
 199                  * Reserved space for exception handlers.
 200                  * Necessary for machines which link their kernels at KSEG0.
 201                  */
 202 -               .fill   0x400
 203 +               .fill   0x3f4
 204
 205                 /* The following two symbols are used for kernel profiling. */
 206                 EXPORT(stext)
 207 Index: linux-2.4.35.4/arch/mips/kernel/proc.c
 208 ===================================================================
 209 --- linux-2.4.35.4.orig/arch/mips/kernel/proc.c 2007-12-15 05:19:36.358492990 +0100
 210 +++ linux-2.4.35.4/arch/mips/kernel/proc.c      2007-12-15 05:20:13.944634901 +0100
 211 @@ -78,9 +78,10 @@
 212         [CPU_AU1550]    "Au1550",
 213         [CPU_24K]       "MIPS 24K",
 214         [CPU_AU1200]    "Au1200",
 215 +       [CPU_BCM4710]   "BCM4710",
 216 +       [CPU_BCM3302]   "BCM3302",
 217  };
 218
 219 -
 220  static int show_cpuinfo(struct seq_file *m, void *v)
 221  {
 222         unsigned int version = current_cpu_data.processor_id;
 223 Index: linux-2.4.35.4/arch/mips/kernel/setup.c
 224 ===================================================================
 225 --- linux-2.4.35.4.orig/arch/mips/kernel/setup.c        2007-12-15 05:19:44.866977862 +0100
 226 +++ linux-2.4.35.4/arch/mips/kernel/setup.c     2007-12-15 05:20:13.944634901 +0100
 227 @@ -493,6 +493,7 @@
 228         void swarm_setup(void);
 229         void hp_setup(void);
 230         void au1x00_setup(void);
 231 +       void brcm_setup(void);
 232         void frame_info_init(void);
 233
 234         frame_info_init();
 235 @@ -691,6 +692,11 @@
 236                  pmc_yosemite_setup();
 237                  break;
 238  #endif
 239 +#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4310)
 240 +       case MACH_GROUP_BRCM:
 241 +                       brcm_setup();
 242 +                       break;
 243 +#endif
 244         default:
 245                 panic("Unsupported architecture");
 246         }
 247 Index: linux-2.4.35.4/arch/mips/kernel/traps.c
 248 ===================================================================
 249 --- linux-2.4.35.4.orig/arch/mips/kernel/traps.c        2007-12-15 05:19:44.870978088 +0100
 250 +++ linux-2.4.35.4/arch/mips/kernel/traps.c     2007-12-15 05:20:13.944634901 +0100
 251 @@ -920,6 +920,7 @@
 252  void __init trap_init(void)
 253  {
 254         extern char except_vec1_generic;
 255 +       extern char except_vec2_generic;
 256         extern char except_vec3_generic, except_vec3_r4000;
 257         extern char except_vec_ejtag_debug;
 258         extern char except_vec4;
 259 @@ -927,6 +928,7 @@
 260
 261         /* Copy the generic exception handler code to it's final destination. */
 262         memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
 263 +       memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
 264
 265         /*
 266          * Setup default vectors
 267 @@ -985,6 +987,12 @@
 268         set_except_vector(13, handle_tr);
 269         set_except_vector(22, handle_mdmx);
 270
 271 +       if (current_cpu_data.cputype == CPU_SB1) {
 272 +               /* Enable timer interrupt and scd mapped interrupt */
 273 +               clear_c0_status(0xf000);
 274 +               set_c0_status(0xc00);
 275 +       }
 276 +
 277         if (cpu_has_fpu && !cpu_has_nofpuex)
 278                 set_except_vector(15, handle_fpe);
 279
 280 Index: linux-2.4.35.4/arch/mips/Makefile
 281 ===================================================================
 282 --- linux-2.4.35.4.orig/arch/mips/Makefile      2007-12-15 05:19:51.215339635 +0100
 283 +++ linux-2.4.35.4/arch/mips/Makefile   2007-12-15 05:20:13.948635130 +0100
 284 @@ -726,6 +726,19 @@
 285  endif
 286
 287  #
 288 +# Broadcom BCM947XX variants
 289 +#
 290 +ifdef CONFIG_BCM947XX
 291 +LIBS           += arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o
 292 +SUBDIRS                += arch/mips/bcm947xx/generic arch/mips/bcm947xx
 293 +LOADADDR       := 0x80001000
 294 +
 295 +zImage: vmlinux
 296 +       $(MAKE) -C arch/$(ARCH)/bcm947xx/compressed
 297 +export LOADADDR
 298 +endif
 299 +
 300 +#
 301  # Choosing incompatible machines durings configuration will result in
 302  # error messages during linking.  Select a default linkscript if
 303  # none has been choosen above.
 304 @@ -779,6 +792,7 @@
 305         $(MAKE) -C arch/$(ARCH)/tools clean
 306         $(MAKE) -C arch/mips/baget clean
 307         $(MAKE) -C arch/mips/lasat clean
 308 +       $(MAKE) -C arch/mips/bcm947xx/compressed clean
 309
 310  archmrproper:
 311         @$(MAKEBOOT) mrproper
 312 Index: linux-2.4.35.4/arch/mips/mm/c-r4k.c
 313 ===================================================================
 314 --- linux-2.4.35.4.orig/arch/mips/mm/c-r4k.c    2007-12-15 05:19:44.874978317 +0100
 315 +++ linux-2.4.35.4/arch/mips/mm/c-r4k.c 2007-12-15 05:20:13.948635130 +0100
 316 @@ -1118,3 +1118,47 @@
 317         build_clear_page();
 318         build_copy_page();
 319  }
 320 +
 321 +#ifdef CONFIG_BCM4704
 322 +static void __init mips32_icache_fill(unsigned long addr, uint nbytes)
 323 +{
 324 +       unsigned long ic_lsize = current_cpu_data.icache.linesz;
 325 +       int i;
 326 +       for (i = 0; i < nbytes; i += ic_lsize)
 327 +               fill_icache_line((addr + i));
 328 +}
 329 +
 330 +/*
 331 + *  This must be run from the cache on 4704A0
 332 + *  so there are no mips core BIU ops in progress
 333 + *  when the PFC is enabled.
 334 + */
 335 +#define PFC_CR0         0xff400000      /* control reg 0 */
 336 +#define PFC_CR1         0xff400004      /* control reg 1 */
 337 +static void __init enable_pfc(u32 mode)
 338 +{
 339 +       /* write range */
 340 +       *(volatile u32 *)PFC_CR1 = 0xffff0000;
 341 +
 342 +       /* enable */
 343 +       *(volatile u32 *)PFC_CR0 = mode;
 344 +}
 345 +#endif
 346 +
 347 +
 348 +void check_enable_mips_pfc(int val)
 349 +{
 350 +
 351 +#ifdef CONFIG_BCM4704
 352 +       struct cpuinfo_mips *c = &current_cpu_data;
 353 +
 354 +       /* enable prefetch cache */
 355 +       if (((c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) == PRID_IMP_BCM3302)
 356 +               && (read_c0_diag() & (1 << 29))) {
 357 +                       mips32_icache_fill((unsigned long) &enable_pfc, 64);
 358 +                       enable_pfc(val);
 359 +       }
 360 +#endif
 361 +}
 362 +
 363 +
 364 Index: linux-2.4.35.4/arch/mips/pci/Makefile
 365 ===================================================================
 366 --- linux-2.4.35.4.orig/arch/mips/pci/Makefile  2007-12-15 05:19:36.398495270 +0100
 367 +++ linux-2.4.35.4/arch/mips/pci/Makefile       2007-12-15 05:20:13.948635130 +0100
 368 @@ -13,7 +13,9 @@
 369  obj-$(CONFIG_MIPS_MSC)         += ops-msc.o
 370  obj-$(CONFIG_MIPS_NILE4)       += ops-nile4.o
 371  obj-$(CONFIG_SNI_RM200_PCI)    += ops-sni.o
 372 +ifndef CONFIG_BCM947XX
 373  obj-y                          += pci.o
 374 +endif
 375  obj-$(CONFIG_PCI_AUTO)         += pci_auto.o
 376
 377  include $(TOPDIR)/Rules.make
 378 Index: linux-2.4.35.4/drivers/char/serial.c
 379 ===================================================================
 380 --- linux-2.4.35.4.orig/drivers/char/serial.c   2007-12-15 05:20:00.539871010 +0100
 381 +++ linux-2.4.35.4/drivers/char/serial.c        2007-12-15 05:20:13.952635360 +0100
 382 @@ -444,6 +444,10 @@
 383                 return inb(info->port+1);
 384  #endif
 385         case SERIAL_IO_MEM:
 386 +#ifdef CONFIG_BCM4310
 387 +               readb((unsigned long) info->iomem_base +
 388 +                               (UART_SCR<<info->iomem_reg_shift));
 389 +#endif
 390                 return readb((unsigned long) info->iomem_base +
 391                              (offset<<info->iomem_reg_shift));
 392         default:
 393 @@ -464,6 +468,9 @@
 394         case SERIAL_IO_MEM:
 395                 writeb(value, (unsigned long) info->iomem_base +
 396                               (offset<<info->iomem_reg_shift));
 397 +#ifdef CONFIG_BCM4704
 398 +               *((volatile unsigned int *) KSEG1ADDR(0x18000000));
 399 +#endif
 400                 break;
 401         default:
 402                 outb(value, info->port+offset);
 403 @@ -1728,7 +1735,7 @@
 404                         /* Special case since 134 is really 134.5 */
 405                         quot = (2*baud_base / 269);
 406                 else if (baud)
 407 -                       quot = baud_base / baud;
 408 +                       quot = (baud_base + (baud / 2)) / baud;
 409         }
 410         /* If the quotient is zero refuse the change */
 411         if (!quot && old_termios) {
 412 @@ -1745,12 +1752,12 @@
 413                                 /* Special case since 134 is really 134.5 */
 414                                 quot = (2*baud_base / 269);
 415                         else if (baud)
 416 -                               quot = baud_base / baud;
 417 +                               quot = (baud_base + (baud / 2)) / baud;
 418                 }
 419         }
 420         /* As a last resort, if the quotient is zero, default to 9600 bps */
 421         if (!quot)
 422 -               quot = baud_base / 9600;
 423 +               quot = (baud_base + 4800) / 9600;
 424         /*
 425          * Work around a bug in the Oxford Semiconductor 952 rev B
 426          * chip which causes it to seriously miscalculate baud rates
 427 @@ -5994,6 +6001,13 @@
 428          *      Divisor, bytesize and parity
 429          */
 430         state = rs_table + co->index;
 431 +       /*
 432 +        * Safe guard: state structure must have been initialized
 433 +        */
 434 +       if (state->iomem_base == NULL) {
 435 +               printk("!unable to setup serial console!\n");
 436 +               return -1;
 437 +       }
 438         if (doflow)
 439                 state->flags |= ASYNC_CONS_FLOW;
 440         info = &async_sercons;
 441 @@ -6007,7 +6021,7 @@
 442         info->io_type = state->io_type;
 443         info->iomem_base = state->iomem_base;
 444         info->iomem_reg_shift = state->iomem_reg_shift;
 445 -       quot = state->baud_base / baud;
 446 +       quot = (state->baud_base + (baud / 2)) / baud;
 447         cval = cflag & (CSIZE | CSTOPB);
 448  #if defined(__powerpc__) || defined(__alpha__)
 449         cval >>= 8;
 450 Index: linux-2.4.35.4/drivers/net/Makefile
 451 ===================================================================
 452 --- linux-2.4.35.4.orig/drivers/net/Makefile    2007-12-15 05:20:10.804455954 +0100
 453 +++ linux-2.4.35.4/drivers/net/Makefile 2007-12-15 05:20:13.952635360 +0100
 454 @@ -3,6 +3,8 @@
 455  # Makefile for the Linux network (ethercard) device drivers.
 456  #
 457
 458 +EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
 459 +
 460  obj-y           :=
 461  obj-m           :=
 462  obj-n           :=
 463 Index: linux-2.4.35.4/drivers/parport/Config.in
 464 ===================================================================
 465 --- linux-2.4.35.4.orig/drivers/parport/Config.in       2007-12-15 05:19:36.422496639 +0100
 466 +++ linux-2.4.35.4/drivers/parport/Config.in    2007-12-15 05:20:13.956635587 +0100
 467 @@ -11,6 +11,7 @@
 468  tristate 'Parallel port support' CONFIG_PARPORT
 469  if [ "$CONFIG_PARPORT" != "n" ]; then
 470     dep_tristate '  PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
 471 +   dep_tristate '  Asus WL500g parallel port' CONFIG_PARPORT_SPLINK $CONFIG_PARPORT
 472     if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then
 473        if [ "$CONFIG_SERIAL" = "m" ]; then
 474           define_tristate CONFIG_PARPORT_PC_CML1 m
 475 Index: linux-2.4.35.4/drivers/parport/Makefile
 476 ===================================================================
 477 --- linux-2.4.35.4.orig/drivers/parport/Makefile        2007-12-15 05:19:36.430497094 +0100
 478 +++ linux-2.4.35.4/drivers/parport/Makefile     2007-12-15 05:20:13.956635587 +0100
 479 @@ -22,6 +22,7 @@
 480
 481  obj-$(CONFIG_PARPORT)          += parport.o
 482  obj-$(CONFIG_PARPORT_PC)       += parport_pc.o
 483 +obj-$(CONFIG_PARPORT_SPLINK)   += parport_splink.o
 484  obj-$(CONFIG_PARPORT_PC_PCMCIA)        += parport_cs.o
 485  obj-$(CONFIG_PARPORT_AMIGA)    += parport_amiga.o
 486  obj-$(CONFIG_PARPORT_MFC3)     += parport_mfc3.o
 487 Index: linux-2.4.35.4/include/asm-mips/bootinfo.h
 488 ===================================================================
 489 --- linux-2.4.35.4.orig/include/asm-mips/bootinfo.h     2007-12-15 05:19:45.026986980 +0100
 490 +++ linux-2.4.35.4/include/asm-mips/bootinfo.h  2007-12-15 05:20:13.956635587 +0100
 491 @@ -37,6 +37,7 @@
 492  #define MACH_GROUP_HP_LJ       20 /* Hewlett Packard LaserJet               */
 493  #define MACH_GROUP_LASAT       21
 494  #define MACH_GROUP_TITAN       22 /* PMC-Sierra Titan                      */
 495 +#define MACH_GROUP_BRCM                   23 /* Broadcom */
 496
 497  /*
 498   * Valid machtype values for group unknown (low order halfword of mips_machtype)
 499 @@ -197,6 +198,15 @@
 500  #define MACH_TANBAC_TB0229     7       /* TANBAC TB0229 (VR4131DIMM) */
 501
 502  /*
 503 + * Valid machtypes for group Broadcom
 504 + */
 505 +#define MACH_BCM93725          0
 506 +#define MACH_BCM93725_VJ       1
 507 +#define MACH_BCM93730          2
 508 +#define MACH_BCM947XX          3
 509 +#define MACH_BCM933XX          4
 510 +
 511 +/*
 512   * Valid machtype for group TITAN
 513   */
 514  #define        MACH_TITAN_YOSEMITE     1       /* PMC-Sierra Yosemite */
 515 Index: linux-2.4.35.4/include/asm-mips/cpu.h
 516 ===================================================================
 517 --- linux-2.4.35.4.orig/include/asm-mips/cpu.h  2007-12-15 05:19:36.442497779 +0100
 518 +++ linux-2.4.35.4/include/asm-mips/cpu.h       2007-12-15 05:20:13.956635587 +0100
 519 @@ -22,6 +22,11 @@
 520     spec.
 521  */
 522
 523 +#define PRID_COPT_MASK         0xff000000
 524 +#define PRID_COMP_MASK         0x00ff0000
 525 +#define PRID_IMP_MASK          0x0000ff00
 526 +#define PRID_REV_MASK          0x000000ff
 527 +
 528  #define PRID_COMP_LEGACY       0x000000
 529  #define PRID_COMP_MIPS         0x010000
 530  #define PRID_COMP_BROADCOM     0x020000
 531 @@ -58,6 +63,7 @@
 532  #define PRID_IMP_RM7000                0x2700
 533  #define PRID_IMP_NEVADA                0x2800          /* RM5260 ??? */
 534  #define PRID_IMP_RM9000                0x3400
 535 +#define PRID_IMP_BCM4710       0x4000
 536  #define PRID_IMP_R5432         0x5400
 537  #define PRID_IMP_R5500         0x5500
 538  #define PRID_IMP_4KC           0x8000
 539 @@ -66,10 +72,16 @@
 540  #define PRID_IMP_4KEC          0x8400
 541  #define PRID_IMP_4KSC          0x8600
 542  #define PRID_IMP_25KF          0x8800
 543 +#define PRID_IMP_BCM3302       0x9000
 544 +#define PRID_IMP_BCM3303       0x9100
 545  #define PRID_IMP_24K           0x9300
 546
 547  #define PRID_IMP_UNKNOWN       0xff00
 548
 549 +#define       BCM330X(id) \
 550 +       (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
 551 +       || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
 552 +
 553  /*
 554   * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
 555   */
 556 @@ -174,7 +186,9 @@
 557  #define CPU_AU1550             57
 558  #define CPU_24K                        58
 559  #define CPU_AU1200             59
 560 -#define CPU_LAST               59
 561 +#define CPU_BCM4710            60
 562 +#define CPU_BCM3302            61
 563 +#define CPU_LAST               61
 564
 565  /*
 566   * ISA Level encodings
 567 Index: linux-2.4.35.4/include/asm-mips/r4kcache.h
 568 ===================================================================
 569 --- linux-2.4.35.4.orig/include/asm-mips/r4kcache.h     2007-12-15 05:19:36.450498234 +0100
 570 +++ linux-2.4.35.4/include/asm-mips/r4kcache.h  2007-12-15 05:20:13.960635812 +0100
 571 @@ -567,4 +567,17 @@
 572                         cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
 573  }
 574
 575 +extern inline void fill_icache_line(unsigned long addr)
 576 +{
 577 +       __asm__ __volatile__(
 578 +               ".set noreorder\n\t"
 579 +               ".set mips3\n\t"
 580 +               "cache %1, (%0)\n\t"
 581 +               ".set mips0\n\t"
 582 +               ".set reorder"
 583 +               :
 584 +               : "r" (addr),
 585 +               "i" (Fill));
 586 +}
 587 +
 588  #endif /* __ASM_R4KCACHE_H */
 589 Index: linux-2.4.35.4/include/asm-mips/serial.h
 590 ===================================================================
 591 --- linux-2.4.35.4.orig/include/asm-mips/serial.h       2007-12-15 05:19:36.458498689 +0100
 592 +++ linux-2.4.35.4/include/asm-mips/serial.h    2007-12-15 05:20:13.960635812 +0100
 593 @@ -223,6 +223,13 @@
 594  #define TXX927_SERIAL_PORT_DEFNS
 595  #endif
 596
 597 +#ifdef CONFIG_BCM947XX
 598 +/* reserve 4 ports to be configured at runtime */
 599 +#define BCM947XX_SERIAL_PORT_DEFNS { 0, }, { 0, }, { 0, }, { 0, },
 600 +#else
 601 +#define BCM947XX_SERIAL_PORT_DEFNS
 602 +#endif
 603 +
 604  #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
 605  #define STD_SERIAL_PORT_DEFNS                  \
 606         /* UART CLK   PORT IRQ     FLAGS        */                      \
 607 @@ -470,6 +477,7 @@
 608  #define SERIAL_PORT_DFNS                       \
 609         ATLAS_SERIAL_PORT_DEFNS                 \
 610         AU1000_SERIAL_PORT_DEFNS                \
 611 +       BCM947XX_SERIAL_PORT_DEFNS              \
 612         COBALT_SERIAL_PORT_DEFNS                \
 613         DDB5477_SERIAL_PORT_DEFNS               \
 614         EV96100_SERIAL_PORT_DEFNS               \
 615 Index: linux-2.4.35.4/init/do_mounts.c
 616 ===================================================================
 617 --- linux-2.4.35.4.orig/init/do_mounts.c        2007-12-15 05:19:48.667194423 +0100
 618 +++ linux-2.4.35.4/init/do_mounts.c     2007-12-15 05:20:13.960635812 +0100
 619 @@ -254,7 +254,13 @@
 620         { "ftlb", 0x2c08 },
 621         { "ftlc", 0x2c10 },
 622         { "ftld", 0x2c18 },
 623 +#if defined(CONFIG_MTD_BLOCK) || defined(CONFIG_MTD_BLOCK_RO)
 624         { "mtdblock", 0x1f00 },
 625 +       { "mtdblock0",0x1f00 },
 626 +       { "mtdblock1",0x1f01 },
 627 +       { "mtdblock2",0x1f02 },
 628 +       { "mtdblock3",0x1f03 },
 629 +#endif
 630         { "nb", 0x2b00 },
 631         { NULL, 0 }
 632  };