da26cc51bb8b355796c2a8ef1105d3d12e6385ff
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wr941nd.c
1 /*
2 * TP-LINK TL-WR941ND board support
3 *
4 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
13
14 #include <asm/mach-ar71xx/ar71xx.h>
15
16 #include "machtype.h"
17 #include "devices.h"
18 #include "dev-dsa.h"
19 #include "dev-m25p80.h"
20 #include "dev-ar913x-wmac.h"
21 #include "dev-gpio-buttons.h"
22 #include "dev-leds-gpio.h"
23
24 #define TL_WR941ND_GPIO_LED_SYSTEM 2
25 #define TL_WR941ND_GPIO_LED_QSS 5
26
27 #define TL_WR941ND_GPIO_BTN_RESET 3
28 #define TL_WR941ND_GPIO_BTN_QSS 7
29
30 #define TL_WR941ND_BUTTONS_POLL_INTERVAL 20
31
32 #ifdef CONFIG_MTD_PARTITIONS
33 static struct mtd_partition tl_wr941nd_partitions[] = {
34 {
35 .name = "u-boot",
36 .offset = 0,
37 .size = 0x020000,
38 .mask_flags = MTD_WRITEABLE,
39 } , {
40 .name = "kernel",
41 .offset = 0x020000,
42 .size = 0x140000,
43 } , {
44 .name = "rootfs",
45 .offset = 0x160000,
46 .size = 0x290000,
47 } , {
48 .name = "art",
49 .offset = 0x3f0000,
50 .size = 0x010000,
51 .mask_flags = MTD_WRITEABLE,
52 } , {
53 .name = "firmware",
54 .offset = 0x020000,
55 .size = 0x3d0000,
56 }
57 };
58 #endif /* CONFIG_MTD_PARTITIONS */
59
60 static struct flash_platform_data tl_wr941nd_flash_data = {
61 #ifdef CONFIG_MTD_PARTITIONS
62 .parts = tl_wr941nd_partitions,
63 .nr_parts = ARRAY_SIZE(tl_wr941nd_partitions),
64 #endif
65 };
66
67 static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
68 {
69 .name = "tl-wr941nd:green:system",
70 .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
71 .active_low = 1,
72 }, {
73 .name = "tl-wr941nd:red:qss",
74 .gpio = TL_WR941ND_GPIO_LED_QSS,
75 .active_low = 1,
76 }
77 };
78
79 static struct gpio_button tl_wr941nd_gpio_buttons[] __initdata = {
80 {
81 .desc = "reset",
82 .type = EV_KEY,
83 .code = BTN_0,
84 .threshold = 5,
85 .gpio = TL_WR941ND_GPIO_BTN_RESET,
86 .active_low = 1,
87 }, {
88 .desc = "qss",
89 .type = EV_KEY,
90 .code = BTN_1,
91 .threshold = 5,
92 .gpio = TL_WR941ND_GPIO_BTN_QSS,
93 .active_low = 1,
94 }
95 };
96
97 static struct dsa_chip_data tl_wr941nd_dsa_chip = {
98 .port_names[0] = "wan",
99 .port_names[1] = "lan1",
100 .port_names[2] = "lan2",
101 .port_names[3] = "lan3",
102 .port_names[4] = "lan4",
103 .port_names[5] = "cpu",
104 };
105
106 static struct dsa_platform_data tl_wr941nd_dsa_data = {
107 .nr_chips = 1,
108 .chip = &tl_wr941nd_dsa_chip,
109 };
110
111 static void __init tl_wr941nd_setup(void)
112 {
113 u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
114
115 ar71xx_set_mac_base(mac);
116
117 ar71xx_add_device_mdio(0x0);
118
119 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
120 ar71xx_eth0_data.phy_mask = 0x0;
121 ar71xx_eth0_data.speed = SPEED_100;
122 ar71xx_eth0_data.duplex = DUPLEX_FULL;
123
124 ar71xx_add_device_eth(0);
125 ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);
126
127 ar71xx_add_device_m25p80(&tl_wr941nd_flash_data);
128
129 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
130 tl_wr941nd_leds_gpio);
131
132 ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
133 ARRAY_SIZE(tl_wr941nd_gpio_buttons),
134 tl_wr941nd_gpio_buttons);
135 ar913x_add_device_wmac();
136 }
137
138 MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TP-LINK TL-WR941ND", tl_wr941nd_setup);
This page took 0.058788 seconds and 3 git commands to generate.