target/linux/ixp4xx/patches-2.6.24/031-nslu2_nas100d_ethernet_support.patch

   1 From af66bd3b3324d51f0c43b7672b7a0563db425377 Mon Sep 17 00:00:00 2001
   2 From: Rod Whitby <rod@whitby.id.au>
   3 Date: Tue, 29 Jan 2008 10:03:19 +1030
   4 Subject: ixp4xx: Ethernet support for the nslu2 and nas100d boards
   5
   6 Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig.
   7
   8 Sets up the corresponding platform data for the nslu2 and nas100d
   9 boards, and reads the ethernet MAC address from the internal flash.
  10
  11 Tested on both little-endian and big-endian kernels.
  12
  13 Signed-off-by: Rod Whitby <rod@whitby.id.au>
  14 Signed-off-by: Michael Westerhof <mwester@dls.net>
  15 Tested-by: Tom King <tom@websb.net>
  16
  17 PATCH FOLLOWS
  18 KernelVersion: v2.6.24-1916-g3832564
  19
  20 Index: linux-2.6.24.7/arch/arm/configs/ixp4xx_defconfig
  21 ===================================================================
  22 --- linux-2.6.24.7.orig/arch/arm/configs/ixp4xx_defconfig
  23 +++ linux-2.6.24.7/arch/arm/configs/ixp4xx_defconfig
  24 @@ -1,7 +1,7 @@
  25  #
  26  # Automatically generated make config: don't edit
  27 -# Linux kernel version: 2.6.24-rc8
  28 -# Wed Jan 23 17:26:16 2008
  29 +# Linux kernel version: 2.6.24
  30 +# Sun Jan 27 07:33:38 2008
  31  #
  32  CONFIG_ARM=y
  33  CONFIG_SYS_SUPPORTS_APM_EMULATION=y
  34 @@ -174,6 +174,8 @@ CONFIG_MACH_GTWX5715=y
  35  #
  36  CONFIG_DMABOUNCE=y
  37  # CONFIG_IXP4XX_INDIRECT_PCI is not set
  38 +CONFIG_IXP4XX_QMGR=y
  39 +CONFIG_IXP4XX_NPE=y
  40
  41  #
  42  # Boot options
  43 @@ -832,6 +834,7 @@ CONFIG_DUMMY=y
  44  # CONFIG_PHYLIB is not set
  45  CONFIG_NET_ETHERNET=y
  46  CONFIG_MII=y
  47 +CONFIG_IXP4XX_ETH=y
  48  # CONFIG_AX88796 is not set
  49  # CONFIG_HAPPYMEAL is not set
  50  # CONFIG_SUNGEM is not set
  51 @@ -925,6 +928,7 @@ CONFIG_HDLC_X25=m
  52  # CONFIG_PC300TOO is not set
  53  # CONFIG_FARSYNC is not set
  54  # CONFIG_DSCC4 is not set
  55 +# CONFIG_IXP4XX_HSS is not set
  56  CONFIG_DLCI=m
  57  CONFIG_DLCI_MAX=8
  58  CONFIG_WAN_ROUTER_DRIVERS=m
  59 Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
  60 ===================================================================
  61 --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
  62 +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
  63 @@ -12,6 +12,7 @@
  64   *
  65   */
  66
  67 +#include <linux/if_ether.h>
  68  #include <linux/kernel.h>
  69  #include <linux/serial.h>
  70  #include <linux/serial_8250.h>
  71 @@ -22,6 +23,7 @@
  72  #include <asm/mach-types.h>
  73  #include <asm/mach/arch.h>
  74  #include <asm/mach/flash.h>
  75 +#include <asm/io.h>
  76
  77  static struct flash_platform_data nas100d_flash_data = {
  78         .map_name               = "cfi_probe",
  79 @@ -131,10 +133,28 @@ static struct platform_device nas100d_ua
  80         .resource               = nas100d_uart_resources,
  81  };
  82
  83 +/* Built-in 10/100 Ethernet MAC interfaces */
  84 +static struct eth_plat_info nas100d_plat_eth[] = {
  85 +       {
  86 +               .phy            = 0,
  87 +               .rxq            = 3,
  88 +               .txreadyq       = 20,
  89 +       }
  90 +};
  91 +
  92 +static struct platform_device nas100d_eth[] = {
  93 +       {
  94 +               .name                   = "ixp4xx_eth",
  95 +               .id                     = IXP4XX_ETH_NPEB,
  96 +               .dev.platform_data      = nas100d_plat_eth,
  97 +       }
  98 +};
  99 +
 100  static struct platform_device *nas100d_devices[] __initdata = {
 101         &nas100d_i2c_gpio,
 102         &nas100d_flash,
 103         &nas100d_leds,
 104 +       &nas100d_eth[0],
 105  };
 106
 107  static void nas100d_power_off(void)
 108 @@ -150,6 +170,10 @@ static void nas100d_power_off(void)
 109
 110  static void __init nas100d_init(void)
 111  {
 112 +       DECLARE_MAC_BUF(mac_buf);
 113 +       uint8_t __iomem *f;
 114 +       int i;
 115 +
 116         ixp4xx_sys_init();
 117
 118         /* gpio 14 and 15 are _not_ clocks */
 119 @@ -172,6 +196,25 @@ static void __init nas100d_init(void)
 120         (void)platform_device_register(&nas100d_uart);
 121
 122         platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
 123 +
 124 +       /*
 125 +        * Map in a portion of the flash and read the MAC address.
 126 +        * Since it is stored in BE in the flash itself, we need to
 127 +        * byteswap it if we're in LE mode.
 128 +        */
 129 +       f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
 130 +       if (f) {
 131 +               for (i = 0; i < 6; i++)
 132 +#ifdef __ARMEB__
 133 +                       nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
 134 +#else
 135 +                       nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + (i^3));
 136 +#endif
 137 +               iounmap(f);
 138 +       }
 139 +       printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n",
 140 +              print_mac(mac_buf, nas100d_plat_eth[0].hwaddr));
 141 +
 142  }
 143
 144  MACHINE_START(NAS100D, "Iomega NAS 100d")
 145 Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
 146 ===================================================================
 147 --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
 148 +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
 149 @@ -14,6 +14,7 @@
 150   * Changed to conform to new style __init ixdp425 kas11 10/22/04
 151   */
 152
 153 +#include <linux/if_ether.h>
 154  #include <linux/kernel.h>
 155  #include <linux/serial.h>
 156  #include <linux/serial_8250.h>
 157 @@ -25,6 +26,7 @@
 158  #include <asm/mach/arch.h>
 159  #include <asm/mach/flash.h>
 160  #include <asm/mach/time.h>
 161 +#include <asm/io.h>
 162
 163  static struct flash_platform_data nslu2_flash_data = {
 164         .map_name               = "cfi_probe",
 165 @@ -143,11 +145,29 @@ static struct platform_device nslu2_uart
 166         .resource               = nslu2_uart_resources,
 167  };
 168
 169 +/* Built-in 10/100 Ethernet MAC interfaces */
 170 +static struct eth_plat_info nslu2_plat_eth[] = {
 171 +       {
 172 +               .phy            = 1,
 173 +               .rxq            = 3,
 174 +               .txreadyq       = 20,
 175 +       }
 176 +};
 177 +
 178 +static struct platform_device nslu2_eth[] = {
 179 +       {
 180 +               .name                   = "ixp4xx_eth",
 181 +               .id                     = IXP4XX_ETH_NPEB,
 182 +               .dev.platform_data      = nslu2_plat_eth,
 183 +       }
 184 +};
 185 +
 186  static struct platform_device *nslu2_devices[] __initdata = {
 187         &nslu2_i2c_gpio,
 188         &nslu2_flash,
 189         &nslu2_beeper,
 190         &nslu2_leds,
 191 +       &nslu2_eth[0],
 192  };
 193
 194  static void nslu2_power_off(void)
 195 @@ -176,6 +196,10 @@ static struct sys_timer nslu2_timer = {
 196
 197  static void __init nslu2_init(void)
 198  {
 199 +       DECLARE_MAC_BUF(mac_buf);
 200 +       uint8_t __iomem *f;
 201 +       int i;
 202 +
 203         ixp4xx_sys_init();
 204
 205         nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 206 @@ -195,6 +219,26 @@ static void __init nslu2_init(void)
 207         (void)platform_device_register(&nslu2_uart);
 208
 209         platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
 210 +
 211 +
 212 +       /*
 213 +        * Map in a portion of the flash and read the MAC address.
 214 +        * Since it is stored in BE in the flash itself, we need to
 215 +        * byteswap it if we're in LE mode.
 216 +        */
 217 +       f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
 218 +       if (f) {
 219 +               for (i = 0; i < 6; i++)
 220 +#ifdef __ARMEB__
 221 +                       nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
 222 +#else
 223 +                       nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3));
 224 +#endif
 225 +               iounmap(f);
 226 +       }
 227 +       printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n",
 228 +              print_mac(mac_buf, nslu2_plat_eth[0].hwaddr));
 229 +
 230  }
 231
 232  MACHINE_START(NSLU2, "Linksys NSLU2")