target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c

   1 /*
   2  *  TP-LINK TL-WR741ND board support
   3  *
   4  *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify it
   7  *  under the terms of the GNU General Public License version 2 as published
   8  *  by the Free Software Foundation.
   9  */
  10
  11 #include <linux/platform_device.h>
  12 #include <linux/mtd/mtd.h>
  13 #include <linux/mtd/partitions.h>
  14 #include <linux/input.h>
  15
  16 #include <asm/mips_machine.h>
  17
  18 #include <asm/mach-ar71xx/ar71xx.h>
  19
  20 #include "devices.h"
  21 #include "dev-m25p80.h"
  22 #include "dev-ap91-pci.h"
  23
  24 #define TL_WR741ND_GPIO_LED_QSS         0
  25 #define TL_WR741ND_GPIO_LED_SYSTEM      1
  26
  27 #define TL_WR741ND_GPIO_BTN_RESET       11
  28 #define TL_WR741ND_GPIO_BTN_QSS         12
  29
  30 #define TL_WR741ND_BUTTONS_POLL_INTERVAL        20
  31
  32 #ifdef CONFIG_MTD_PARTITIONS
  33 static struct mtd_partition tl_wr741nd_partitions[] = {
  34         {
  35                 .name           = "u-boot",
  36                 .offset         = 0,
  37                 .size           = 0x020000,
  38                 .mask_flags     = MTD_WRITEABLE,
  39         } , {
  40                 .name           = "kernel",
  41                 .offset         = 0x020000,
  42                 .size           = 0x140000,
  43         } , {
  44                 .name           = "rootfs",
  45                 .offset         = 0x160000,
  46                 .size           = 0x290000,
  47         } , {
  48                 .name           = "art",
  49                 .offset         = 0x3f0000,
  50                 .size           = 0x010000,
  51                 .mask_flags     = MTD_WRITEABLE,
  52         } , {
  53                 .name           = "firmware",
  54                 .offset         = 0x020000,
  55                 .size           = 0x3d0000,
  56         }
  57 };
  58 #endif /* CONFIG_MTD_PARTITIONS */
  59
  60 static struct flash_platform_data tl_wr741nd_flash_data = {
  61 #ifdef CONFIG_MTD_PARTITIONS
  62         .parts          = tl_wr741nd_partitions,
  63         .nr_parts       = ARRAY_SIZE(tl_wr741nd_partitions),
  64 #endif
  65 };
  66
  67 static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
  68         {
  69                 .name           = "tl-wr741nd:green:system",
  70                 .gpio           = TL_WR741ND_GPIO_LED_SYSTEM,
  71                 .active_low     = 1,
  72         }, {
  73                 .name           = "tl-wr741nd:green:qss",
  74                 .gpio           = TL_WR741ND_GPIO_LED_QSS,
  75                 .active_low     = 1,
  76         }
  77 };
  78
  79 static struct gpio_button tl_wr741nd_gpio_buttons[] __initdata = {
  80         {
  81                 .desc           = "reset",
  82                 .type           = EV_KEY,
  83                 .code           = BTN_0,
  84                 .threshold      = 5,
  85                 .gpio           = TL_WR741ND_GPIO_BTN_RESET,
  86                 .active_low     = 1,
  87         }, {
  88                 .desc           = "qss",
  89                 .type           = EV_KEY,
  90                 .code           = BTN_1,
  91                 .threshold      = 5,
  92                 .gpio           = TL_WR741ND_GPIO_BTN_QSS,
  93                 .active_low     = 1,
  94         }
  95 };
  96
  97 static void __init tl_wr741nd_setup(void)
  98 {
  99         u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
 100         u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 101
 102         ar71xx_set_mac_base(mac);
 103         ar71xx_add_device_mdio(0x0);
 104
 105         /* WAN port */
 106         ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 107         ar71xx_eth0_data.phy_mask = 0x0;
 108         ar71xx_eth0_data.speed = SPEED_100;
 109         ar71xx_eth0_data.duplex = DUPLEX_FULL;
 110         ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
 111         ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
 112         ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
 113
 114         /* LAN ports */
 115         ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 116         ar71xx_eth1_data.phy_mask = 0x0;
 117         ar71xx_eth1_data.speed = SPEED_1000;
 118         ar71xx_eth1_data.duplex = DUPLEX_FULL;
 119         ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
 120         ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
 121         ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
 122
 123         ar71xx_add_device_eth(1);
 124         ar71xx_add_device_eth(0);
 125
 126         ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
 127
 128         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
 129                                         tl_wr741nd_leds_gpio);
 130
 131         ar71xx_add_device_gpio_buttons(-1, TL_WR741ND_BUTTONS_POLL_INTERVAL,
 132                                         ARRAY_SIZE(tl_wr741nd_gpio_buttons),
 133                                         tl_wr741nd_gpio_buttons);
 134
 135         ap91_pci_init(ee, NULL);
 136 }
 137 MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TP-LINK TL-WR741ND", tl_wr741nd_setup);