target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/myloader.h

   1 /*
   2  *  Compex's MyLoader specific definitions
   3  *
   4  *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify it
   7  *  under the terms of the GNU General Public License version 2 as published
   8  *  by the Free Software Foundation.
   9  *
  10  */
  11
  12 #ifndef _MYLOADER_H_
  13 #define _MYLOADER_H_
  14
  15 /*
  16  * Firmware file format:
  17  *
  18  *      <header>
  19  *      [<block descriptor 0>]
  20  *      ...
  21  *      [<block descriptor n>]
  22  *      <null block descriptor>
  23  *      [<block data 0>]
  24  *      ...
  25  *      [<block data n>]
  26  *
  27  *
  28  */
  29
  30 /* Myloader specific magic numbers */
  31 #define MYLO_MAGIC_FIRMWARE     0x4C594D00
  32 #define MYLO_MAGIC_20021103     0x20021103
  33 #define MYLO_MAGIC_20021107     0x20021107
  34
  35 #define MYLO_MAGIC_SYS_PARAMS   MYLO_MAGIC_20021107
  36 #define MYLO_MAGIC_PARTITIONS   MYLO_MAGIC_20021103
  37 #define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
  38
  39 /*
  40  * Addresses of the data structures provided by MyLoader
  41  */
  42 #define MYLO_MIPS_SYS_PARAMS    0x80000800      /* System Parameters */
  43 #define MYLO_MIPS_BOARD_PARAMS  0x80000A00      /* Board Parameters */
  44 #define MYLO_MIPS_PARTITIONS    0x80000C00      /* Partition Table */
  45 #define MYLO_MIPS_BOOT_PARAMS   0x80000E00      /* Boot Parameters */
  46
  47 /* Vendor ID's (seems to be same as the PCI vendor ID's) */
  48 #define VENID_COMPEX            0x11F6
  49
  50 /* Devices based on the ADM5120 */
  51 #define DEVID_COMPEX_NP27G      0x0078
  52 #define DEVID_COMPEX_NP28G      0x044C
  53 #define DEVID_COMPEX_NP28GHS    0x044E
  54 #define DEVID_COMPEX_WP54Gv1C   0x0514
  55 #define DEVID_COMPEX_WP54G      0x0515
  56 #define DEVID_COMPEX_WP54AG     0x0546
  57 #define DEVID_COMPEX_WPP54AG    0x0550
  58 #define DEVID_COMPEX_WPP54G     0x0555
  59
  60 /* Devices based on the IXP422 */
  61 #define DEVID_COMPEX_WP18       0x047E
  62 #define DEVID_COMPEX_NP18A      0x0489
  63
  64 /* Other devices */
  65 #define DEVID_COMPEX_NP26G8M    0x03E8
  66 #define DEVID_COMPEX_NP26G16M   0x03E9
  67
  68 struct mylo_fw_header {
  69         uint32_t        magic;  /* must be MYLO_MAGIC_FIRMWARE */
  70         uint32_t        crc;    /* CRC of the whole firmware */
  71         uint32_t        res0;   /* unknown/unused */
  72         uint32_t        res1;   /* unknown/unused */
  73         uint16_t        vid;    /* vendor ID */
  74         uint16_t        did;    /* device ID */
  75         uint16_t        svid;   /* sub vendor ID */
  76         uint16_t        sdid;   /* sub device ID */
  77         uint32_t        rev;    /* device revision */
  78         uint32_t        fwhi;   /* FIXME: firmware version high? */
  79         uint32_t        fwlo;   /* FIXME: firmware version low? */
  80         uint32_t        flags;  /* firmware flags */
  81 };
  82
  83 #define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
  84 #define FW_FLAG_BOOT_SECTOR_WE  0x02 /* enable of write boot sectors (below 64K) */
  85
  86 struct mylo_fw_blockdesc {
  87         uint32_t        type;   /* block type */
  88         uint32_t        addr;   /* relative address to flash start */
  89         uint32_t        dlen;   /* size of block data in bytes */
  90         uint32_t        blen;   /* total size of block in bytes */
  91 };
  92
  93 #define FW_DESC_TYPE_UNUSED     0
  94 #define FW_DESC_TYPE_USED       1
  95
  96 struct mylo_partition {
  97         uint16_t        flags;  /* partition flags */
  98         uint16_t        type;   /* type of the partition */
  99         uint32_t        addr;   /* relative address of the partition from the
 100                                    flash start */
 101         uint32_t        size;   /* size of the partition in bytes */
 102         uint32_t        param;  /* if this is the active partition, the
 103                                    MyLoader load code to this address */
 104 };
 105
 106 #define PARTITION_FLAG_ACTIVE   0x8000 /* this is the active partition,
 107                                         * MyLoader loads firmware from here */
 108 #define PARTITION_FLAG_ISRAM    0x2000 /* FIXME: this is a RAM partition? */
 109 #define PARTIIION_FLAG_RAMLOAD  0x1000 /* FIXME: load this partition into the RAM? */
 110 #define PARTITION_FLAG_PRELOAD  0x0800 /* the partition data preloaded to RAM
 111                                         * before decompression */
 112 #define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
 113
 114 #define PARTITION_TYPE_FREE     0
 115 #define PARTITION_TYPE_USED     1
 116
 117 #define MYLO_MAX_PARTITIONS     8       /* maximum number of partitions in the
 118                                            partition table */
 119
 120 struct mylo_partition_table {
 121         uint32_t        magic;  /* must be MYLO_MAGIC_PARTITIONS */
 122         uint32_t        res0;   /* unknown/unused */
 123         uint32_t        res1;   /* unknown/unused */
 124         uint32_t        res2;   /* unknown/unused */
 125         struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
 126 };
 127
 128 struct mylo_partition_header {
 129         uint32_t        len;    /* length of the partition data */
 130         uint32_t        crc;    /* CRC value of the partition data */
 131 };
 132
 133 struct mylo_system_params {
 134         uint32_t        magic;  /* must be MYLO_MAGIC_SYS_PARAMS */
 135         uint32_t        res0;
 136         uint32_t        res1;
 137         uint32_t        mylo_ver;
 138         uint16_t        vid;    /* Vendor ID */
 139         uint16_t        did;    /* Device ID */
 140         uint16_t        svid;   /* Sub Vendor ID */
 141         uint16_t        sdid;   /* Sub Device ID */
 142         uint32_t        rev;    /* device revision */
 143         uint32_t        fwhi;
 144         uint32_t        fwlo;
 145         uint32_t        tftp_addr;
 146         uint32_t        prog_start;
 147         uint32_t        flash_size;     /* Size of boot FLASH in bytes */
 148         uint32_t        dram_size;      /* Size of onboard RAM in bytes */
 149 };
 150
 151
 152 struct mylo_eth_addr {
 153         uint8_t mac[6];
 154         uint8_t csum[2];
 155 };
 156
 157 #define MYLO_ETHADDR_COUNT      8       /* maximum number of ethernet address
 158                                            in the board parameters */
 159
 160 struct mylo_board_params {
 161         uint32_t        magic;  /* must be MYLO_MAGIC_BOARD_PARAMS */
 162         uint32_t        res0;
 163         uint32_t        res1;
 164         uint32_t        res2;
 165         struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
 166 };
 167
 168 struct myloader_info {
 169         u32     vid;
 170         u32     did;
 171         u32     svid;
 172         u32     sdid;
 173         uint8_t macs[MYLO_ETHADDR_COUNT][6];
 174 };
 175
 176 extern struct myloader_info myloader_info;
 177 extern int myloader_present(void) __init;
 178
 179 #endif /* _MYLOADER_H_*/