target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch

   1 diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c
   2 --- linux.old/arch/mips/bcm947xx/pcibios.c      2006-04-07 21:20:59.000000000 +0200
   3 +++ linux.dev/arch/mips/bcm947xx/pcibios.c      2006-04-08 03:17:59.000000000 +0200
   4 @@ -157,6 +157,7 @@
   5
   6  static u32 pci_iobase = 0x100;
   7  static u32 pci_membase = SB_PCI_DMA;
   8 +static u32 pcmcia_membase = 0x40004000;
   9
  10  void __init
  11  pcibios_fixup_bus(struct pci_bus *b)
  12 @@ -188,7 +189,7 @@
  13                         /* Fix up resource bases */
  14                         for (pos = 0; pos < 6; pos++) {
  15                                 res = &d->resource[pos];
  16 -                               base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase;
  17 +                               base = (res->flags & IORESOURCE_IO) ? &pci_iobase : ((b->number == 2) ? &pcmcia_membase : &pci_membase);
  18                                 if (res->end) {
  19                                         size = res->end - res->start + 1;
  20                                         if (*base & (size - 1))
  21 @@ -308,7 +309,12 @@
  22         where = PCI_BASE_ADDRESS_0 + (resource * 4);
  23         size = res->end - res->start;
  24         pci_read_config_dword(dev, where, &reg);
  25 -       reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
  26 +
  27 +       if (dev->bus->number == 1)
  28 +               reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
  29 +       else
  30 +               reg = res->start;
  31 +
  32         pci_write_config_dword(dev, where, reg);
  33  }
  34
  35 diff -urN linux.old/drivers/pcmcia/yenta.c linux.dev/drivers/pcmcia/yenta.c
  36 --- linux.old/drivers/pcmcia/yenta.c    2004-11-17 12:54:21.000000000 +0100
  37 +++ linux.dev/drivers/pcmcia/yenta.c    2006-04-11 17:47:45.000000000 +0200
  38 @@ -543,6 +543,9 @@
  39          * Probe for usable interrupts using the force
  40          * register to generate bogus card status events.
  41          */
  42 +
  43 +#ifndef CONFIG_BCM947XX
  44 +       /* WRT54G3G does not like this */
  45         cb_writel(socket, CB_SOCKET_EVENT, -1);
  46         cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
  47         exca_writeb(socket, I365_CSCINT, 0);
  48 @@ -557,7 +560,8 @@
  49         }
  50         cb_writel(socket, CB_SOCKET_MASK, 0);
  51         exca_writeb(socket, I365_CSCINT, 0);
  52 -
  53 +#endif
  54 +
  55         mask = probe_irq_mask(val) & 0xffff;
  56
  57         bridge_ctrl &= ~CB_BRIDGE_INTR;
  58 @@ -578,6 +582,12 @@
  59         socket->cap.cb_dev = socket->dev;
  60         socket->cap.bus = NULL;
  61
  62 +#ifdef CONFIG_BCM947XX
  63 +       /* irq mask probing is broken for the WRT54G3G */
  64 +       if (socket->cap.irq_mask == 0)
  65 +               socket->cap.irq_mask = 0x6f8;
  66 +#endif
  67 +
  68         printk(KERN_INFO "Yenta ISA IRQ mask 0x%04x, PCI irq %d\n",
  69                socket->cap.irq_mask, socket->cb_irq);
  70  }
  71 @@ -609,6 +619,15 @@
  72         printk(KERN_INFO "Socket status: %08x\n",
  73                cb_readl(socket, CB_SOCKET_STATE));
  74
  75 +       /* Generate an interrupt on card insert/remove */
  76 +       config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
  77 +
  78 +       /* Set up Multifunction Routing Status Register */
  79 +       config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
  80 +
  81 +       /* Switch interrupts to parallelized */
  82 +       config_writeb(socket, 0x92, 0x64);
  83 +
  84         /* Register it with the pcmcia layer.. */
  85         cardbus_register(socket);
  86
  87 @@ -731,7 +750,7 @@
  88  {
  89         struct pci_bus *bus;
  90         struct resource *root, *res;
  91 -       u32 start, end;
  92 +       u32 start = 0, end = 0;
  93         u32 align, size, min, max;
  94         unsigned offset;
  95         unsigned mask;
  96 @@ -750,6 +769,15 @@
  97         res->end = 0;
  98         root = pci_find_parent_resource(socket->dev, res);
  99
 100 +#ifdef CONFIG_BCM947XX
 101 +       /* default mem resources are completely fscked up on the wrt54g3g */
 102 +       /* bypass the entire resource allocation stuff below and just set it statically */
 103 +       if (type & IORESOURCE_MEM) {
 104 +               res->start = 0x40004000;
 105 +               res->end = res->start + 0x3fff;
 106 +       }
 107 +
 108 +#else
 109         if (!root)
 110                 return;
 111
 112 @@ -794,6 +822,7 @@
 113                 res->start = res->end = 0;
 114                 return;
 115         }
 116 +#endif
 117
 118         config_writel(socket, offset, res->start);
 119         config_writel(socket, offset+4, res->end);