ar71xx: add support for external mii_bus

[openwrt.git] / target / linux / ar71xx / image / Makefile

diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 4c88a85..da2f8fd 100644 (file)
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -77,11 +77,29 @@ define Image/Build/WRT400N
        fi; fi
 endef
 
+dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,6208k@0x50000(firmware)
+define Image/Build/DIR825B1
+       $(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
+       $(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(call imgname,$(1),$(2)).bin)
+       if [ `stat -c%s "$(call imgname,$(1),$(2)).bin"` -gt 1048576 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+               rm -f $(call imgname,$(1),$(2)).bin; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 5308416 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+               rm -f $(call imgname,$(1),$(2)).bin; \
+       else \
+               dd if=$(KDIR)/root.$(1) of=$(call imgname,$(1),$(2)).bin bs=1k seek=1024; \
+               cp $(call imgname,$(1),$(2)).bin $(call imgname,$(1),$(2))-backup-loader.bin; \
+               echo -n "01AP94-AR7161-RT-080619-00" >> $(call imgname,$(1),$(2))-backup-loader.bin; \
+       fi; fi
+endef
+
+cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2880k(rootfs),64k(art)ro,3776k@0x30000(firmware)
 define Image/Build/Cameo
-       $(call PatchKernelLzma,$(2),$(3))
-       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 851968 ]; then \
+       $(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
                echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
-       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 3014656 ]; then \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2949120 ]; then \
                echo "Warning: $(KDIR)/root.$(1) is too big"; \
        else \
                mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
@@ -89,8 +107,8 @@ define Image/Build/Cameo
                        -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
                        -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
                ( \
-                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=832k conv=sync; \
-                       dd if=$(KDIR)/root.$(1) bs=2944k conv=sync; \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=2880k conv=sync; \
                        echo -n $(4); \
                ) > $(call imgname,$(1),$(2)).uni; \
        fi; fi
@@ -241,6 +259,10 @@ define Image/Build/WNDR3700
                dd if=$(KDIR)/vmlinux-$(2).uImage.squashfs bs=1M conv=sync; \
                dd if=$(KDIR)/root.$(1) bs=64k; \
        ) > $(call imgname,$(1),$(2))-sysupgrade.bin
+       $(STAGING_DIR_HOST)/bin/mkdniimg \
+               -B WNDR3700 -v OpenWrt.$(REVISION) \
+               -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+               -o $(call imgname,$(1),$(2))-factory.img
 endef
 
 define Image/Build/Template/Compex
@@ -263,6 +285,18 @@ define Image/Build/Template/WRT400N/jffs2-64k
        $(call Image/Build/Template/WRT400N,jffs2-64k,$(1),$(2),$(3))
 endef
 
+define Image/Build/Template/DIR825B1
+       $(call Image/Build/DIR825B1,$(1),$(2),$(3),$(4))
+endef
+
+define Image/Build/Template/DIR825B1/squashfs
+       $(call Image/Build/Template/DIR825B1,squashfs,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/DIR825B1/jffs2-64k
+       $(call Image/Build/Template/DIR825B1,jffs2-64k,$(1),$(2),$(3))
+endef
+
 define Image/Build/Template/CyberTAN
        $(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4))
 endef
@@ -448,6 +482,10 @@ define Image/Build/Profile/WRT400N
        $(call Image/Build/Template/WRT400N/$(1),wrt400n,board=WRT400N)
 endef
 
+define Image/Build/Profile/DIR825B1
+       $(call Image/Build/Template/DIR825B1/$(1),dir-825-b1,board=DIR-825-B1)
+endef
+
 define Image/Build/Profile/WRT160NL
        $(call Image/Build/Template/CyberTAN/$(1),wrt160nl,board=WRT160NL,1.00.01)
 endef
@@ -456,6 +494,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/AP83,$(1))
        $(call Image/Build/Profile/A02RBW300N,$(1))
        $(call Image/Build/Profile/DIR615C1,$(1))
+       $(call Image/Build/Profile/DIR825B1,$(1))
        $(call Image/Build/Profile/MZKW04NU,$(1))
        $(call Image/Build/Profile/MZKW300NH,$(1))
        $(call Image/Build/Profile/TEW632BRP,$(1))