arm: when linking the kernel, move the section discards after the other sections...
[openwrt.git] / target / linux / au1000 / image / Makefile
index 7408e27..3a672d9 100644 (file)
@@ -11,6 +11,8 @@ LOADADDR = 0x81000000         # RAM start + 16M
 KERNEL_ENTRY = 0x80100000
 RAMSIZE = 0x00100000           # 1MB
 
+JFFS2_BLOCKSIZE = 128k
+
 FLASH_KERNEL := 0xBFD00000
 FLASH_FS     := 0xBE000000
 
@@ -49,17 +51,17 @@ define Image/Prepare
 endef
 
 define Image/Build/Initramfs
-       $(OBJCOPY_SREC) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.srec
+       $(OBJCOPY_SREC) $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.srec
 endef
 
 define Image/Build
        $(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma $(FLASH_FS) $(KDIR)/root.$(1) $(KDIR)/root.$(1).srec
-       grep -v S7 $(KDIR)/root.$(1).srec > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
-       grep -v S0 $(KDIR)/kernel.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
-       $(CP) $(KDIR)/kernel.flash.bin $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.bin
-       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).fs
-       $(CP) $(KDIR)/kernel.flash.srec $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux-flash.srec
-       $(CP) $(KDIR)/kernel.ram.srec $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux-ram.srec
+       grep -v S7 $(KDIR)/root.$(1).srec > $(BIN_DIR)/openwrt-$(BOARD)-$(1).srec
+       grep -v S0 $(KDIR)/kernel.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(1).srec
+       $(INSTALL_BIN) $(KDIR)/kernel.flash.bin $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.bin
+       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1).fs
+       $(CP) $(KDIR)/kernel.flash.srec $(BIN_DIR)/openwrt-$(BOARD)-vmlinux-flash.srec
+       $(CP) $(KDIR)/kernel.ram.srec $(BIN_DIR)/openwrt-$(BOARD)-vmlinux-ram.srec
 ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
        $(call Image/Build/Initramfs)
 endif
This page took 0.023192 seconds and 4 git commands to generate.