Subject: [PATCH] Upgrades x86 to kernel 2.6.27 (#4195)

[openwrt.git] / target / linux / at91 / patches-2.6.21 / 015-simenable.patch

diff --git a/target/linux/at91/patches-2.6.21/015-simenable.patch b/target/linux/at91/patches-2.6.21/015-simenable.patch
index 64ee466..9b11f76 100644 (file)
--- a/target/linux/at91/patches-2.6.21/015-simenable.patch
+++ b/target/linux/at91/patches-2.6.21/015-simenable.patch
@@ -1,58 +1,69 @@
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c\r
---- linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c        2007-07-26 12:43:11.000000000 +0200\r
-+++ linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c    2007-08-20 16:56:56.000000000 +0200\r
-@@ -151,31 +151,37 @@\r
- //    at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));\r
- \r
- /* Other LED's */\r
--       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1\r
--       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1\r
--       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1\r
--       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1\r
--       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2\r
--       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2\r
-+      at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1\r
-+      at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1\r
-+      at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1\r
-+      at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1\r
-+      at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2\r
-+      at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2\r
-+\r
-+/* Test jig presence detection */\r
-+      at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT\r
- \r
- /* SIM Cards */\r
--       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3\r
--       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2\r
--       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1\r
-+      if (at91_get_gpio_value(AT91_PIN_PB8)) {\r
-+              at91_set_gpio_output(AT91_PIN_PB11, 0);\r
-+              at91_set_gpio_output(AT91_PIN_PB9, 1);\r
-+      } else {\r
-+              at91_set_gpio_output(AT91_PIN_PB11, 1);\r
-+              at91_set_gpio_output(AT91_PIN_PB9, 0);\r
-+      }\r
-+              \r
-+      at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2\r
- \r
- /* GSM Module Control */\r
--       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF\r
--\r
--/* Test jig presence detection */\r
--       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT\r
-+      at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF\r
- \r
- /* Power indicator */\r
--       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND\r
-+      at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND\r
- \r
- /* USB Device control */\r
--       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX\r
--       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP\r
--                       at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive\r
-+      at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX\r
-+      at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP\r
-+      at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive\r
- \r
- }\r
- \r
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -150,32 +150,38 @@ static void __init vlink_board_init(void
+       /* LEDs */
+ //    at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
+ 
+-/* Other LED's */
+-       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
+-       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
+-       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
+-       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
+-       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
+-       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
+-
+-/* SIM Cards */
+-       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3
+-       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
+-       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
+-
+-/* GSM Module Control */
+-       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
+-
+-/* Test jig presence detection */
+-       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
+-
+-/* Power indicator */
+-       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
+-
+-/* USB Device control */
+-       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
+-       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
+-                       at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
++      /* Other LED's */
++      at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
++      at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
++      at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
++      at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
++      at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
++      at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
++
++      /* Test jig presence detection */
++      at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
++
++      /* SIM Cards */
++      if (at91_get_gpio_value(AT91_PIN_PB8)) {
++              at91_set_gpio_output(AT91_PIN_PB11, 0);
++              at91_set_gpio_output(AT91_PIN_PB9, 1);
++      } else {
++              at91_set_gpio_output(AT91_PIN_PB11, 1);
++              at91_set_gpio_output(AT91_PIN_PB9, 0);
++      }
++
++      at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
++
++      /* GSM Module Control */
++      at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
++
++      /* Power indicator */
++      at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
++
++      /* USB Device control */
++      at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
++      at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
++      at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
+ 
+ }
+