ramips: rt305x: nuke built-in MTD partition maps
[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-w502u.c
index 4e9dd18..6633ca0 100644 (file)
@@ -10,9 +10,6 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
 
 #include <asm/mach-ralink/machine.h>
 #include <asm/mach-ralink/dev-gpio-buttons.h>
 
 #include <asm/mach-ralink/machine.h>
 #include <asm/mach-ralink/dev-gpio-buttons.h>
 #define W502U_KEYS_POLL_INTERVAL       20
 #define W502U_KEYS_DEBOUNCE_INTERVAL   (3 * W502U_KEYS_POLL_INTERVAL)
 
 #define W502U_KEYS_POLL_INTERVAL       20
 #define W502U_KEYS_DEBOUNCE_INTERVAL   (3 * W502U_KEYS_POLL_INTERVAL)
 
-static struct mtd_partition w502u_partitions[] = {
-       {
-               .name   = "u-boot",
-               .offset = 0,
-               .size   = 0x030000,
-               .mask_flags = MTD_WRITEABLE,
-       }, {
-               .name   = "config",
-               .offset = 0x030000,
-               .size   = 0x010000,
-               .mask_flags = MTD_WRITEABLE,
-       }, {
-               .name   = "factory",
-               .offset = 0x040000,
-               .size   = 0x010000,
-               .mask_flags = MTD_WRITEABLE,
-       }, {
-               .name   = "kernel",
-               .offset = 0x050000,
-               .size   = 0x0d0000,
-       }, {
-               .name   = "rootfs",
-               .offset = 0x120000,
-               .size   = 0x6d0000,
-       }, {
-               .name   = "data3g",
-               .offset = 0x7f0000,
-               .size   = 0x010000,
-               .mask_flags = MTD_WRITEABLE,
-       }, {
-               .name   = "firmware",
-               .offset = 0x050000,
-               .size   = 0x7a0000,
-       }
-};
-
 static struct gpio_led w502u_leds_gpio[] __initdata = {
        {
                .name           = "alfa:blue:usb",
 static struct gpio_led w502u_leds_gpio[] __initdata = {
        {
                .name           = "alfa:blue:usb",
@@ -104,8 +65,6 @@ static void __init w502u_init(void)
        rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
                          RT305X_GPIO_MODE_UART0_SHIFT));
 
        rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
                          RT305X_GPIO_MODE_UART0_SHIFT));
 
-       rt305x_flash0_data.nr_parts = ARRAY_SIZE(w502u_partitions);
-       rt305x_flash0_data.parts = w502u_partitions;
        rt305x_register_flash(0);
 
        rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
        rt305x_register_flash(0);
 
        rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
This page took 0.026587 seconds and 4 git commands to generate.