[ar71xx] fix dir-825-b1 default network config after r21905
[openwrt.git] / package / uboot-ifxmips / Makefile
index 10e9080..736e322 100644 (file)
@@ -16,7 +16,6 @@ PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
 PKG_MD5SUM:=579707c8ecbf1ab4127285d2aac2a9ee
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
 PKG_MD5SUM:=579707c8ecbf1ab4127285d2aac2a9ee
-PKG_CAT:=bzcat
 PKG_TARGETS:=bin
 
 include $(INCLUDE_DIR)/package.mk
 PKG_TARGETS:=bin
 
 include $(INCLUDE_DIR)/package.mk
@@ -24,9 +23,10 @@ include $(INCLUDE_DIR)/package.mk
 define Package/uboot-ifxmips
   SECTION:=boot
   CATEGORY:=Boot Loaders
 define Package/uboot-ifxmips
   SECTION:=boot
   CATEGORY:=Boot Loaders
-  DEPENDS:=@TARGET_ifxmips
+  DEPENDS:=@TARGET_ifxmips @BROKEN
   TITLE:=U-Boot for Infineon MIPS boards
   TITLE:=U-Boot for Infineon MIPS boards
-  URL:=http://www.denx.de/wiki/UBoot/WebHome
+  URL:=http://www.denx.de/wiki/U-Boot
+  MENU:=1
 endef
 
 define Build/Prepare
 endef
 
 define Build/Prepare
@@ -35,6 +35,10 @@ define Build/Prepare
        find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
 endef
 
        find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
 endef
 
+define Package/uboot-ifxmips/config
+       source "$(SOURCE)/Config.in"
+endef
+
 UBOOT_CONFIG:=danube
 
 UBOOT_MAKE_OPTS:=\
 UBOOT_CONFIG:=danube
 
 UBOOT_MAKE_OPTS:=\
@@ -44,6 +48,11 @@ UBOOT_MAKE_OPTS:=\
        PLATFORM_CPU=mips32r2 \
        UBOOT_RAM_TEXT_BASE=0xA0400000
 
        PLATFORM_CPU=mips32r2 \
        UBOOT_RAM_TEXT_BASE=0xA0400000
 
+A800_FIX:=
+ifeq ($(CONFIG_IFXMIPS_UBOOT_A800),y)
+A800_FIX += -DA800_SWITCH
+endif
+
 define Build/Configure
        $(MAKE) -s -C $(PKG_BUILD_DIR) \
                $(UBOOT_MAKE_OPTS) \
 define Build/Configure
        $(MAKE) -s -C $(PKG_BUILD_DIR) \
                $(UBOOT_MAKE_OPTS) \
@@ -51,18 +60,25 @@ define Build/Configure
 endef
 
 define Build/Compile
 endef
 
 define Build/Compile
-       $(MAKE) -s -C $(PKG_BUILD_DIR) \
+       $(MAKE) -C $(PKG_BUILD_DIR) \
                $(UBOOT_MAKE_OPTS) \
                $(UBOOT_MAKE_OPTS) \
+               OWRT_FLAGS="-DTEXT_BASE=0xa0400000 ${A800_FIX}" \
                ifx_all
                ifx_all
-       if [ `stat -c%s $(PKG_BUILD_DIR)/u-boot.ifx` -gt 65536 ] ;\
-       then \
-               echo "u-boot.ifx file has exceeded 64MB in size."; exit 1; \
-       fi
+       $(CP) $(PKG_BUILD_DIR)/u-boot.srec $(PKG_BUILD_DIR)/asc.srec
+       $(PKG_BUILD_DIR)/gct \
+               $(PKG_BUILD_DIR)/danube_ref_ddr166.conf \
+               $(PKG_BUILD_DIR)/asc.srec \
+               $(PKG_BUILD_DIR)/u-boot.asc
+       $(MAKE) -C $(PKG_BUILD_DIR) \
+               $(UBOOT_MAKE_OPTS) \
+               OWRT_FLAGS="-DDANUBE_BOOT_FROM_EBU=1 -DTEXT_BASE=0xB0000000 ${A800_FIX}" \
+               clean ifx_all
 endef
 
 define Package/uboot-ifxmips/install
        mkdir -p $(1)
        dd if=$(PKG_BUILD_DIR)/u-boot.ifx of=$(1)/u-boot.ifx bs=64k conv=sync
 endef
 
 define Package/uboot-ifxmips/install
        mkdir -p $(1)
        dd if=$(PKG_BUILD_DIR)/u-boot.ifx of=$(1)/u-boot.ifx bs=64k conv=sync
+       $(CP) $(PKG_BUILD_DIR)/u-boot.asc $(1)
 endef
 
 $(eval $(call BuildPackage,uboot-ifxmips))
 endef
 
 $(eval $(call BuildPackage,uboot-ifxmips))
This page took 0.023229 seconds and 4 git commands to generate.