ramips: register ethernet device on the DIR-300 board

[openwrt.git] / target / linux / etrax / patches-2.6.30 / 500-i2c_gvc.patch

diff --git a/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch
index dc63165..115fd1c 100644 (file)
--- a/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch
+++ b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch
@@ -1,6 +1,8 @@
---- a/arch/cris/arch-v10/drivers/Kconfig
-+++ b/arch/cris/arch-v10/drivers/Kconfig
-@@ -450,11 +450,18 @@ config ETRAX_I2C
+Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig
+===================================================================
+--- linux-2.6.30.8.orig/arch/cris/arch-v10/drivers/Kconfig     2009-10-02 11:31:49.000000000 +0200
++++ linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig  2009-10-06 10:36:23.000000000 +0200
+@@ -450,11 +450,31 @@
          i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
          val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
  
@@ -10,6 +12,19 @@
 +      select ETRAX_I2C_USES_PB_NOT_PB_I2C
 +      help
 +        Enables an I2C driver with Geert Vancompernolle improvement.
++
++config ETRAX_I2C_SLAVE_DELAY
++      bool "I2C Slave delay support"
++      depends on ETRAX_I2C_GVC  && EXPERIMENTAL
++      help
++        Enable this to enhanced master/slave dialog
++        Improvement by Positive Going (www.positivegoing.it) and BK srl (www.b-k.it)
++
++config ETRAX_I2C_DYN_ALLOC
++      bool "I2C major device dynamic alloc"
++      depends on ETRAX_I2C_GVC && EXPERIMENTAL
++      help
++        Enable this to dynamicaly alloc major i2c device number
 +
  # this is true for most products since PB-I2C seems to be somewhat
  # flawed..
@@ -20,7 +35,7 @@
        help
          Select whether to use the special I2C mode in the PB I/O register or
          not.  This option needs to be selected in order to use some drivers
-@@ -478,7 +485,7 @@ config ETRAX_I2C_CLK_PORT
+@@ -478,7 +498,7 @@
  
  config ETRAX_I2C_EEPROM
        bool "I2C EEPROM (non-volatile RAM) support"
@@ -29,8 +44,10 @@
        help
          Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
          driver.  Select size option: Probed, 2k, 8k, 16k.
---- a/arch/cris/arch-v10/drivers/Makefile
-+++ b/arch/cris/arch-v10/drivers/Makefile
+Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Makefile
+===================================================================
+--- linux-2.6.30.8.orig/arch/cris/arch-v10/drivers/Makefile    2009-10-02 11:31:14.000000000 +0200
++++ linux-2.6.30.8/arch/cris/arch-v10/drivers/Makefile 2009-10-02 11:31:50.000000000 +0200
 @@ -4,6 +4,7 @@
  
  obj-$(CONFIG_ETRAX_AXISFLASHMAP)      += axisflashmap.o