[x86] Make gzipping of images configurable via menuconfig

[openwrt.git] / target / linux / orion / image / Makefile

diff --git a/target/linux/orion/image/Makefile b/target/linux/orion/image/Makefile
index 66edc04..058519f 100644 (file)
--- a/target/linux/orion/image/Makefile
+++ b/target/linux/orion/image/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2008 OpenWrt.org
+# Copyright (C) 2008-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -7,73 +7,6 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-define Image/Prepare
-       cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
-endef
-
-define Image/BuildKernel
-# WRT350N v2: mach id 1633 (0x661)
-       echo -en "\x06\x1c\xa0\xe3\x61\x10\x81\xe3" > $(KDIR)/wrt350nv2-zImage
-       cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wrt350nv2-zImage
-       $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
-       -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
-       -d $(KDIR)/wrt350nv2-zImage $(KDIR)/wrt350nv2-uImage
-       cp $(KDIR)/wrt350nv2-uImage $(BIN_DIR)/openwrt-wrt350nv2-uImage
-# WNR854T: mach id 1801 (0x709)
-       echo -en "\x07\x1c\xa0\xe3\x09\x10\x81\xe3" > $(KDIR)/wnr854t-zImage
-       cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wnr854t-zImage
-       $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
-       -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
-       -d $(KDIR)/wnr854t-zImage $(KDIR)/wnr854t-uImage
-       cp $(KDIR)/wnr854t-uImage $(BIN_DIR)/openwrt-wnr854t-uImage
-# DT2: mach id 1514 (0x5EA)
-       echo -en "\x05\x1c\xa0\xe3\xea\x10\x81\xe3" > $(KDIR)/dt2-zImage
-       cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/dt2-zImage
-       $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
-       -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
-       -d $(KDIR)/dt2-zImage $(KDIR)/dt2-uImage
-       cp $(KDIR)/dt2-uImage $(BIN_DIR)/openwrt-dt2-uImage
-endef
-
-define Image/Build/Netgear
-       mkdir $(KDIR)/netgear_image
-       cp $(KDIR)/wnr854t-uImage $(KDIR)/netgear_image/uImage
-       $(STAGING_DIR_HOST)/bin/mkfs.jffs2 -m none -p -l -q -e 128KiB -o $(KDIR)/wnr854t-uImage.jffs2 -d $(KDIR)/netgear_image
-       rm -rf $(KDIR)/netgear_image
-       ( \
-               dd if=$(KDIR)/wnr854t-uImage.jffs2 bs=1024k conv=sync; \
-               dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
-       ) > $(BIN_DIR)/openwrt-$(2)-$(1).img
-       $(STAGING_DIR_HOST)/bin/add_header $(3) $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img
-endef
-
-define Image/Build/Linksys
-# placeholder for the WRT350N v2
-endef
-
-define Image/Build/Freecom
-       $(INSTALL_DIR) $(TARGET_DIR)/boot
-       # TODO: Add special CMDLINE shim for webupgrade image here
-       $(CP) $(KDIR)/dt2-uImage $(TARGET_DIR)/boot/uImage
-       rm -rf $(TARGET_DIR)/{var,jffs,rom}
-       $(INSTALL_DIR) $(TARGET_DIR)/var
-       $(TAR) cfj $(BIN_DIR)/openwrt-$(2)-$(1).img --owner=root --group=root -C $(TARGET_DIR)/ .
-       $(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img $(3)
-endef
-
-define Image/Build
-       $(call Image/Build/$(1),$(1))
-       $(call Image/Build/Netgear,$(1),wnr854t,NG_WNR854T,$(1))
-       $(call Image/Build/Linksys,$(1),wrt350nv2,WNR350Nv2,$(1))
-       $(call Image/Build/Freecom,$(1),dt2,DT,$(1))
-endef
-
-define Image/Build/squashfs
-       $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-       ( \
-               dd if=$(KDIR)/uImage bs=1024k conv=sync; \
-               dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
-       ) > $(BIN_DIR)/openwrt-$(BOARD)-$(1).img
-endef
+include $(SUBTARGET).mk
 
 $(eval $(call BuildImage))