toolchain/gdb: fix compile for powerpc targets, refresh patch

[openwrt.git] / package / comgt / files / 3g.sh

diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
index 2859a1b..616beec 100644 (file)
--- a/package/comgt/files/3g.sh
+++ b/package/comgt/files/3g.sh
@@ -1,19 +1,20 @@
 set_3g_led() {
 set_3g_led() {

-       grep WRT54G3G /proc/diag/model >/dev/null || return 0
+       # set on WRT54G3G only
+       [ -f /proc/diag/model ] || return 0
+       grep -q "WRT54G3G" /proc/diag/model >/dev/null || return 0

        echo "$1" > /proc/diag/led/3g_green
        echo "$2" > /proc/diag/led/3g_blue
        echo "$1" > /proc/diag/led/3g_green
        echo "$2" > /proc/diag/led/3g_blue

+       grep -q "WRT54G3G$" /proc/diag/model >/dev/null || return 0

        echo "$3" > /proc/diag/led/3g_blink
 }
 
 scan_3g() {
        local device
        echo "$3" > /proc/diag/led/3g_blink
 }
 
 scan_3g() {
        local device

-
-       scan_ppp "$@"

        config_get device "$1" device
 
        # try to figure out the device if it's invalid
        [ -n "$device" -a -e "$device" ] || {
        config_get device "$1" device
 
        # try to figure out the device if it's invalid
        [ -n "$device" -a -e "$device" ] || {

-               for device in /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
+               for device in /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do

                        [ -e "$device" ] && {
                                config_set "$1" device "$device"
                                break
                        [ -e "$device" ] && {
                                config_set "$1" device "$device"
                                break


@@ -22,6 +23,7 @@ scan_3g() {
        }
 
        # enable 3G with the 3G button by default
        }
 
        # enable 3G with the 3G button by default

+       local button

        config_get button "$1" button
        [ -z "$button" ] && {
                config_set "$1" button 1
        config_get button "$1" button
        [ -z "$button" ] && {
                config_set "$1" button 1


@@ -29,6 +31,7 @@ scan_3g() {
 }
 
 stop_interface_3g() {
 }
 
 stop_interface_3g() {

+       stop_interface_ppp "$1"

        set_3g_led 0 0 0
        killall gcom >/dev/null 2>/dev/null
 }
        set_3g_led 0 0 0
        killall gcom >/dev/null 2>/dev/null
 }


@@ -37,17 +40,33 @@ setup_interface_3g() {
        local iface="$1"
        local config="$2"
        local chat="/etc/chatscripts/3g.chat"
        local iface="$1"
        local config="$2"
        local chat="/etc/chatscripts/3g.chat"

-       
+
+       local device

        config_get device "$config" device
 
        config_get device "$config" device
 

+       local maxwait
+       config_get maxwait "$config" maxwait
+       maxwait=${maxwait:-20}
+       while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
+               maxwait=$(($maxwait - 1))
+               sleep 1
+       done
+

        for module in slhc ppp_generic ppp_async; do
                /sbin/insmod $module 2>&- >&-
        done
 
        for module in slhc ppp_generic ppp_async; do
                /sbin/insmod $module 2>&- >&-
        done
 

-       config_get apn "$cfg" apn
-       config_get service "$cfg" service
-       config_get pincode "$cfg" pincode
-       config_get mtu "$cfg" mtu
+       local apn
+       config_get apn "$config" apn
+
+       local service
+       config_get service "$config" service
+
+       local pincode
+       config_get pincode "$config" pincode
+
+       local mtu
+       config_get mtu "$config" mtu

 
        set_3g_led 1 0 1
 
 
        set_3g_led 1 0 1
 


@@ -55,14 +74,15 @@ setup_interface_3g() {
        case "$service" in
                cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
        *)
        case "$service" in
                cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
        *)

-               if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
+               cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
+               if echo "$cardinfo" | grep Novatel; then

                        case "$service" in
                                umts_only) CODE=2;;
                                gprs_only) CODE=1;;
                                *) CODE=0;;
                        esac
                        mode="AT\$NWRAT=${CODE},2"
                        case "$service" in
                                umts_only) CODE=2;;
                                gprs_only) CODE=1;;
                                *) CODE=0;;
                        esac
                        mode="AT\$NWRAT=${CODE},2"

-               else
+               elif echo "$cardinfo" | grep Option; then

                        case "$service" in
                                umts_only) CODE=1;;
                                gprs_only) CODE=0;;
                        case "$service" in
                                umts_only) CODE=1;;
                                gprs_only) CODE=0;;


@@ -70,17 +90,22 @@ setup_interface_3g() {
                        esac
                        mode="AT_OPSYS=${CODE}"
                fi
                        esac
                        mode="AT_OPSYS=${CODE}"
                fi

-               
-               PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
-                       echo "$cfg(3g): Failed to set the PIN code."
-                       set_3g_led 0 0 0
-                       return 1
+               # Don't assume Option to be default as it breaks with Huawei Cards/Sticks
+
+               test -z "$pincode" || {
+                       PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+                               echo "$config(3g): Failed to set the PIN code."
+                               set_3g_led 0 0 0
+                               return 1
+                       }
+               }
+               test -z "$mode" || {
+                       MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom

                }
                }

-               MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom

        esac
        set_3g_led 1 0 0
 
        esac
        set_3g_led 1 0 0
 

-       config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -f $chat"
+       config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"

        start_pppd "$config" \
                noaccomp \
                nopcomp \
        start_pppd "$config" \
                noaccomp \
                nopcomp \