Include the architecture specific gpio file for now
[openwrt.git] / package / ppp / files / ppp.sh
index 35572a0..0d0941f 100644 (file)
@@ -10,7 +10,7 @@ start_pppd() {
 
        # make sure only one pppd process is started
        lock "/var/lock/ppp-${cfg}"
-       local pid="$(cat /var/run/ppp-${cfg}.pid 2>/dev/null)"
+       local pid="$(head -n1 /var/run/ppp-${cfg}.pid 2>/dev/null)"
        [ -d "/proc/$pid" ] && grep pppd "/proc/$pid/cmdline" 2>/dev/null >/dev/null && {
                lock -u "/var/lock/ppp-${cfg}"
                return 0
@@ -21,20 +21,40 @@ start_pppd() {
        config_get username "$cfg" username
        config_get password "$cfg" password
        config_get keepalive "$cfg" keepalive
-       interval="${keepalive%%*[, ]}"
+
+       config_get connect "$cfg" connect
+       config_get disconnect "$cfg" disconnect
+
+       interval="${keepalive##*[, ]}"
        [ "$interval" != "$keepalive" ] || interval=5
        
        config_get demand "$cfg" demand
-       [ -n "$demand" ] && echo "nameserver 1.1.1.1" > /tmp/resolv.conf
+       [ -n "$demand" ] && echo "nameserver 1.1.1.1" > /tmp/resolv.conf.auto
        /usr/sbin/pppd "$@" \
-               ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive##[, ]*}} \
+               ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
                ${demand:+precompiled-active-filter /etc/ppp/filter demand idle }${demand:-persist} \
                usepeerdns \
                defaultroute \
                replacedefaultroute \
                ${username:+user "$username" password "$password"} \
                linkname "$cfg" \
-               ipparam "$cfg"
+               ipparam "$cfg" \
+               ${connect:+connect "$connect"} \
+               ${disconnect:+disconnect "$disconnect"}
 
        lock -u "/var/lock/ppp-${cfg}"
 }
+
+setup_interface_ppp() {
+       local iface="$1"
+       local config="$2"
+
+       config_get device "$config" device
+
+       config_get mtu "$cfg" mtu
+       mtu=${mtu:-1492}
+       start_pppd "$config" \
+               mtu $mtu mru $mtu \
+               "$device"
+}
+
This page took 0.022156 seconds and 4 git commands to generate.