[brcm63xx] add support for the Pirelli AG226G board (#5337)

[openwrt.git] / target / linux / ifxmips / patches / 100-board.patch

diff --git a/target/linux/ifxmips/patches/100-board.patch b/target/linux/ifxmips/patches/100-board.patch
index e33a470..052a08a 100644 (file)
--- a/target/linux/ifxmips/patches/100-board.patch
+++ b/target/linux/ifxmips/patches/100-board.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig

-@@ -78,6 +78,21 @@ config MIPS_COBALT
+@@ -78,6 +78,23 @@ config MIPS_COBALT

        select SYS_SUPPORTS_LITTLE_ENDIAN
        select GENERIC_HARDIRQS_NO__DO_IRQ
  
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select GENERIC_HARDIRQS_NO__DO_IRQ
  


@@ -11,9 +11,11 @@
 +      select CEVT_R4K
 +      select CSRC_R4K
 +      select SYS_HAS_CPU_MIPS32_R1
 +      select CEVT_R4K
 +      select CSRC_R4K
 +      select SYS_HAS_CPU_MIPS32_R1

++      select SYS_HAS_CPU_MIPS32_R2

 +      select HAVE_STD_PC_SERIAL_PORT
 +      select SYS_SUPPORTS_BIG_ENDIAN
 +      select SYS_SUPPORTS_32BIT_KERNEL
 +      select HAVE_STD_PC_SERIAL_PORT
 +      select SYS_SUPPORTS_BIG_ENDIAN
 +      select SYS_SUPPORTS_32BIT_KERNEL

++      select SYS_SUPPORTS_MULTITHREADING

 +      select SYS_HAS_EARLY_PRINTK
 +      select HW_HAS_PCI
 +      select GENERIC_GPIO
 +      select SYS_HAS_EARLY_PRINTK
 +      select HW_HAS_PCI
 +      select GENERIC_GPIO


@@ -22,7 +24,7 @@
  config MACH_DECSTATION
        bool "DECstations"
        select BOOT_ELF32
  config MACH_DECSTATION
        bool "DECstations"
        select BOOT_ELF32

-@@ -697,6 +712,7 @@ source "arch/mips/sibyte/Kconfig"
+@@ -697,6 +714,7 @@ source "arch/mips/sibyte/Kconfig"

  source "arch/mips/tx4927/Kconfig"
  source "arch/mips/tx4938/Kconfig"
  source "arch/mips/vr41xx/Kconfig"
  source "arch/mips/tx4927/Kconfig"
  source "arch/mips/tx4938/Kconfig"
  source "arch/mips/vr41xx/Kconfig"


@@ -61,16 +63,6 @@
  #define CL_SIZE                       COMMAND_LINE_SIZE
  
  extern char *system_type;
  #define CL_SIZE                       COMMAND_LINE_SIZE
  
  extern char *system_type;

---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1464,6 +1464,7 @@ void __cpuinit per_cpu_trap_init(void)
-        */
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+              cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;

 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
 @@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)       += fixup-
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
 @@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)       += fixup-