ar71xx: ag71xx: don't use dev->trans_start
[openwrt.git] / target / linux / ar71xx / files / drivers / net / ag71xx / ag71xx_phy.c
index 7242868..3e3d383 100644 (file)
@@ -1,7 +1,7 @@
 /*
  *  Atheros AR71xx built-in ethernet mac driver
  *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  *  Based on Atheros' AG7100 driver
 
 #include "ag71xx.h"
 
-#define PLL_SEC_CONFIG         0x18050004
-#define PLL_ETH0_INT_CLOCK     0x18050010
-#define PLL_ETH1_INT_CLOCK     0x18050014
-#define PLL_ETH_EXT_CLOCK      0x18050018
-
-#define ag71xx_pll_shift(_ag)   (((_ag)->pdev->id) ? 19 : 17)
-#define ag71xx_pll_offset(_ag) (((_ag)->pdev->id) ? PLL_ETH1_INT_CLOCK \
-                                                  : PLL_ETH0_INT_CLOCK)
-
-static void ag71xx_set_pll(struct ag71xx *ag, u32 pll_val)
-{
-       void __iomem *pll_reg = ioremap_nocache(ag71xx_pll_offset(ag), 4);
-       void __iomem *pll_cfg = ioremap_nocache(PLL_SEC_CONFIG, 4);
-       u32 s;
-       u32 t;
-
-       s = ag71xx_pll_shift(ag);
-
-       t = __raw_readl(pll_cfg);
-       t &= ~(3 << s);
-       t |=  (2 << s);
-       __raw_writel(t, pll_cfg);
-       udelay(100);
-
-       __raw_writel(pll_val, pll_reg);
-
-       t |= (3 << s);
-       __raw_writel(t, pll_cfg);
-       udelay(100);
-
-       t &= ~(3 << s);
-       __raw_writel(t, pll_cfg);
-       udelay(100);
-       DBG("%s: pll_reg %#x: %#x\n", ag->dev->name,
-                       (unsigned int)pll_reg, __raw_readl(pll_reg));
-
-       iounmap(pll_cfg);
-       iounmap(pll_reg);
-}
-
 static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
 {
        switch (ag->speed) {
@@ -67,21 +27,11 @@ static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
        return "?";
 }
 
-#if 1
-#define PLL_VAL_1000   0x00110000
-#define PLL_VAL_100    0x00001099
-#define PLL_VAL_10     0x00991099
-#else
-#define PLL_VAL_1000   0x01111000
-#define PLL_VAL_100    0x09991000
-#define PLL_VAL_10     0x09991999
-#endif
-
 static void ag71xx_phy_link_update(struct ag71xx *ag)
 {
+       struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
        u32 cfg2;
        u32 ifctl;
-       u32 pll;
        u32 fifo5;
        u32 mii_speed;
 
@@ -106,27 +56,32 @@ static void ag71xx_phy_link_update(struct ag71xx *ag)
        case SPEED_1000:
                mii_speed =  MII_CTRL_SPEED_1000;
                cfg2 |= MAC_CFG2_IF_1000;
-               pll = PLL_VAL_1000;
                fifo5 |= FIFO_CFG5_BM;
                break;
        case SPEED_100:
                mii_speed = MII_CTRL_SPEED_100;
                cfg2 |= MAC_CFG2_IF_10_100;
                ifctl |= MAC_IFCTL_SPEED;
-               pll = PLL_VAL_100;
                break;
        case SPEED_10:
                mii_speed = MII_CTRL_SPEED_10;
                cfg2 |= MAC_CFG2_IF_10_100;
-               pll = PLL_VAL_10;
                break;
        default:
                BUG();
                return;
        }
 
-       ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff);
-       ag71xx_set_pll(ag, pll);
+       if (pdata->is_ar91xx)
+               ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff);
+       else if (pdata->is_ar724x)
+               ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3);
+       else
+               ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff);
+
+       if (pdata->set_pll)
+               pdata->set_pll(ag->speed);
+
        ag71xx_mii_ctrl_set_speed(ag, mii_speed);
 
        ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
@@ -140,15 +95,19 @@ static void ag71xx_phy_link_update(struct ag71xx *ag)
                        ag71xx_speed_str(ag),
                        (DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
 
-       DBG("%s: fifo1=%#x, fifo2=%#x, fifo3=%#x, fifo4=%#x, fifo5=%#x\n",
+       DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
                ag->dev->name,
+               ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
                ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
-               ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2),
+               ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
+
+       DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
+               ag->dev->name,
                ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
                ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
                ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
 
-       DBG("%s: mac_cfg2=%#x, ifctl=%#x, mii_ctrl=%#x\n",
+       DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x, mii_ctrl=%#x\n",
                ag->dev->name,
                ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
                ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
@@ -171,12 +130,8 @@ static void ag71xx_phy_link_adjust(struct net_device *dev)
                }
        }
 
-       if (phydev->link != ag->link) {
-               if (phydev->link)
-                       netif_schedule(dev);
-
+       if (phydev->link != ag->link)
                status_change = 1;
-       }
 
        ag->link = phydev->link;
        ag->duplex = phydev->duplex;
@@ -214,60 +169,82 @@ void ag71xx_phy_stop(struct ag71xx *ag)
        }
 }
 
-int ag71xx_phy_connect(struct ag71xx *ag)
+static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
+{
+       struct net_device *dev = ag->dev;
+       struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+       int ret = 0;
+
+       /* use fixed settings */
+       switch (pdata->speed) {
+       case SPEED_10:
+       case SPEED_100:
+       case SPEED_1000:
+               break;
+       default:
+               printk(KERN_ERR "%s: invalid speed specified\n",
+                       dev->name);
+               ret = -EINVAL;
+               break;
+       }
+
+       return ret;
+}
+
+static int ag71xx_phy_connect_multi(struct ag71xx *ag)
 {
        struct net_device *dev = ag->dev;
        struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
        struct phy_device *phydev = NULL;
        int phy_count = 0;
        int phy_addr;
+       int ret = 0;
 
-       if (ag->mii_bus && pdata->phy_mask) {
-               /* TODO: use mutex of the mdio bus? */
-               for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-                       if (!(pdata->phy_mask & (1 << phy_addr)))
-                               continue;
+       for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+               if (!(pdata->phy_mask & (1 << phy_addr)))
+                       continue;
 
-                       if (ag->mii_bus->phy_map[phy_addr] == NULL)
-                               continue;
+               if (ag->mii_bus->phy_map[phy_addr] == NULL)
+                       continue;
 
-                       DBG("%s: PHY found at %s, uid=%08x\n",
-                               dev->name,
-                               ag->mii_bus->phy_map[phy_addr]->dev.bus_id,
-                               ag->mii_bus->phy_map[phy_addr]->phy_id);
+               DBG("%s: PHY found at %s, uid=%08x\n",
+                       dev->name,
+                       dev_name(&ag->mii_bus->phy_map[phy_addr]->dev),
+                       ag->mii_bus->phy_map[phy_addr]->phy_id);
 
-                       if (phydev == NULL)
-                               phydev = ag->mii_bus->phy_map[phy_addr];
+               if (phydev == NULL)
+                       phydev = ag->mii_bus->phy_map[phy_addr];
 
-                       phy_count++;
-               }
+               phy_count++;
        }
 
        switch (phy_count) {
+       case 0:
+               printk(KERN_ERR "%s: no PHY found with phy_mask=%08x\n",
+                       dev->name, pdata->phy_mask);
+               ret = -ENODEV;
+               break;
        case 1:
-               ag->phy_dev = phy_connect(dev, phydev->dev.bus_id,
+               ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev),
                        &ag71xx_phy_link_adjust, 0, pdata->phy_if_mode);
 
                if (IS_ERR(ag->phy_dev)) {
                        printk(KERN_ERR "%s: could not connect to PHY at %s\n",
-                               dev->name, phydev->dev.bus_id);
+                               dev->name, dev_name(&phydev->dev));
                        return PTR_ERR(ag->phy_dev);
                }
 
                /* mask with MAC supported features */
-               phydev->supported &= (SUPPORTED_10baseT_Half
-                       | SUPPORTED_10baseT_Full
-                       | SUPPORTED_100baseT_Half
-                       | SUPPORTED_100baseT_Full
-                       | SUPPORTED_Autoneg
-                       | SUPPORTED_MII
-                       | SUPPORTED_TP);
+               if (pdata->has_gbit)
+                       phydev->supported &= PHY_GBIT_FEATURES;
+               else
+                       phydev->supported &= PHY_BASIC_FEATURES;
 
                phydev->advertising = phydev->supported;
 
                printk(KERN_DEBUG "%s: connected to PHY at %s "
                        "[uid=%08x, driver=%s]\n",
-                       dev->name, phydev->dev.bus_id,
+                       dev->name, dev_name(&phydev->dev),
                        phydev->phy_id, phydev->drv->name);
 
                ag->link = 0;
@@ -276,26 +253,74 @@ int ag71xx_phy_connect(struct ag71xx *ag)
                break;
 
        default:
-               switch (pdata->speed) {
-               case SPEED_10:
-               case SPEED_100:
-               case SPEED_1000:
-                       break;
-               default:
-                       printk(KERN_ERR "%s: invalid speed specified\n",
-                               dev->name);
-                       return -EINVAL;
-               }
-
-               ag->phy_dev = NULL;
                printk(KERN_DEBUG "%s: connected to %d PHYs\n",
                        dev->name, phy_count);
+               ret = ag71xx_phy_connect_fixed(ag);
                break;
        }
 
+       return ret;
+}
+
+static int dev_is_class(struct device *dev, void *class)
+{
+       if (dev->class != NULL && !strcmp(dev->class->name, class))
+               return 1;
+
        return 0;
 }
 
+static struct device *dev_find_class(struct device *parent, char *class)
+{
+       if (dev_is_class(parent, class)) {
+               get_device(parent);
+               return parent;
+       }
+
+       return device_find_child(parent, class, dev_is_class);
+}
+
+static struct mii_bus *dev_to_mii_bus(struct device *dev)
+{
+       struct device *d;
+
+       d = dev_find_class(dev, "mdio_bus");
+       if (d != NULL) {
+               struct mii_bus *bus;
+
+               bus = to_mii_bus(d);
+               put_device(d);
+
+               return bus;
+       }
+
+       return NULL;
+}
+
+int ag71xx_phy_connect(struct ag71xx *ag)
+{
+       struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+       ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev);
+       if (ag->mii_bus == NULL) {
+               printk(KERN_ERR "%s: unable to find MII bus on device '%s'\n",
+                       ag->dev->name, dev_name(pdata->mii_bus_dev));
+               return -ENODEV;
+       }
+
+       /* Reset the mdio bus explicitly */
+       if (ag->mii_bus->reset) {
+               mutex_lock(&ag->mii_bus->mdio_lock);
+               ag->mii_bus->reset(ag->mii_bus);
+               mutex_unlock(&ag->mii_bus->mdio_lock);
+       }
+
+       if (pdata->phy_mask)
+               return ag71xx_phy_connect_multi(ag);
+
+       return ag71xx_phy_connect_fixed(ag);
+}
+
 void ag71xx_phy_disconnect(struct ag71xx *ag)
 {
        if (ag->phy_dev)
This page took 0.027782 seconds and 4 git commands to generate.