b44: fix misalignment and space-saving in rx packet handling (significant throughput...

[openwrt.git] / target / linux / ifxmips / patches / 110-drivers.patch

diff --git a/target/linux/ifxmips/patches/110-drivers.patch b/target/linux/ifxmips/patches/110-drivers.patch
index 38d7f00..931978f 100644 (file)
--- a/target/linux/ifxmips/patches/110-drivers.patch
+++ b/target/linux/ifxmips/patches/110-drivers.patch
@@ -1,6 +1,6 @@
 --- a/drivers/char/Makefile
 +++ b/drivers/char/Makefile
-@@ -113,6 +113,10 @@
+@@ -114,6 +114,10 @@ obj-$(CONFIG_PS3_FLASH)           += ps3flash.o
  obj-$(CONFIG_JS_RTC)          += js-rtc.o
  js-rtc-y = rtc.o
  
@@ -13,14 +13,14 @@
  
 --- a/drivers/mtd/maps/Makefile
 +++ b/drivers/mtd/maps/Makefile
-@@ -68,3 +68,4 @@
+@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM)    += plat-ram.o
  obj-$(CONFIG_MTD_OMAP_NOR)    += omap_nor.o
  obj-$(CONFIG_MTD_MTX1)                += mtx-1_flash.o
  obj-$(CONFIG_MTD_INTEL_VR_NOR)        += intel_vr_nor.o
 +obj-$(CONFIG_MTD_IFXMIPS)  += ifxmips.o
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -351,6 +351,12 @@
+@@ -351,6 +351,12 @@ config MACB
  
  source "drivers/net/arm/Kconfig"
  
@@ -35,7 +35,7 @@
        depends on ARM || MIPS || SUPERH
 --- a/drivers/serial/Kconfig
 +++ b/drivers/serial/Kconfig
-@@ -1327,6 +1327,14 @@
+@@ -1334,6 +1334,14 @@ config SERIAL_OF_PLATFORM
          Currently, only 8250 compatible ports are supported, but
          others can easily be added.
  
@@ -52,15 +52,14 @@
        depends on QUICC_ENGINE
 --- a/drivers/serial/Makefile
 +++ b/drivers/serial/Makefile
-@@ -66,4 +66,5 @@
- obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
- obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+@@ -68,3 +68,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
  obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
  obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
++obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -96,6 +96,7 @@
+@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
  obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
  obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
  obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
@@ -70,14 +69,15 @@
  
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -254,3 +254,4 @@
- obj-$(CONFIG_NETXEN_NIC) += netxen/
+@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
  obj-$(CONFIG_NIU) += niu.o
  obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
+ obj-$(CONFIG_SFC) += sfc/
+-
 +obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
 --- a/drivers/crypto/Kconfig
 +++ b/drivers/crypto/Kconfig
-@@ -9,6 +9,9 @@
+@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
          If you say N, all options in this submenu will be skipped and disabled.
  
  if CRYPTO_HW
@@ -89,36 +89,27 @@
        tristate "Support for VIA PadLock ACE"
 --- a/drivers/crypto/Makefile
 +++ b/drivers/crypto/Makefile
-@@ -2,3 +2,4 @@
- obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
- obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
+@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
  obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
+ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
+ obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
 +obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
 --- a/drivers/usb/host/Kconfig
 +++ b/drivers/usb/host/Kconfig
-@@ -260,3 +260,9 @@
-         To compile this driver as a module, choose M here: the
-         module will be called r8a66597-hcd.
- 
+@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
+       help
+          This driver enables support for the on-chip R8A66597 in the
+          SH7366 and SH7723 processors.
++
 +config USB_DWC_HCD
 +      tristate "IFXMIPS USB Host Controller Driver"
-+      depends on USB && IFXMIPS
++      depends on USB && IFXMIPS 
 +      default y
 +      help
-+              Danube USB Host Controller
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -16,4 +16,6 @@
- obj-$(CONFIG_USB_SL811_CS)    += sl811_cs.o
- obj-$(CONFIG_USB_U132_HCD)    += u132-hcd.o
- obj-$(CONFIG_USB_R8A66597_HCD)        += r8a66597-hcd.o
--
-+obj-$(CONFIG_USB_DWC_HCD) += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o \
-+                      dwc_otg_attr.o dwc_otg_driver.o dwc_otg_cil.o \
-+                      dwc_otg_cil_intr.o dwc_otg_proc.o dwc_otg_ifx.o
++       Danube USB Host Controller
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -151,6 +151,12 @@
+@@ -153,6 +153,12 @@ config LEDS_CLEVO_MAIL
          To compile this driver as a module, choose M here: the
          module will be called leds-clevo-mail.
  
@@ -133,17 +124,17 @@
  config LEDS_TRIGGERS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -22,6 +22,7 @@
- obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
+@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_CM_X270)              
  obj-$(CONFIG_LEDS_CLEVO_MAIL)         += leds-clevo-mail.o
  obj-$(CONFIG_LEDS_HP6XX)              += leds-hp6xx.o
-+obj-$(CONFIG_LEDS_IFXMIPS)  += leds-ifxmips.o
+ obj-$(CONFIG_LEDS_FSG)                        += leds-fsg.o
++obj-$(CONFIG_LEDS_IFXMIPS)            += leds-ifxmips.o
  
  # LED Triggers
  obj-$(CONFIG_LEDS_TRIGGER_TIMER)      += ledtrig-timer.o
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -670,6 +670,12 @@
+@@ -683,6 +683,12 @@ config TXX9_WDT
        help
          Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.