--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
-@@ -12,18 +12,28 @@
+@@ -12,18 +12,28 @@ config ARCH_AT91RM9200
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
config ARCH_AT91X40
bool "AT91x40"
-@@ -45,7 +55,7 @@
+@@ -45,7 +55,7 @@ config MACH_ONEARM
depends on ARCH_AT91RM9200
help
Select this if you are using Ajeco's 1ARM Single Board Computer.
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
-@@ -94,7 +104,7 @@
+@@ -94,7 +104,7 @@ config MACH_KB9200
depends on ARCH_AT91RM9200
help
Select this if you are using KwikByte's KB920x board.
config MACH_PICOTUX2XX
bool "picotux 200"
-@@ -109,6 +119,38 @@
+@@ -109,6 +119,38 @@ config MACH_KAFA
help
Select this if you are using Sperry-Sun's KAFA board.
endif
# ----------------------------------------------------------
-@@ -133,6 +175,34 @@
+@@ -133,6 +175,34 @@ config MACH_AT91SAM9260EK
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
endif
# ----------------------------------------------------------
-@@ -163,6 +233,13 @@
+@@ -163,6 +233,13 @@ config MACH_AT91SAM9263EK
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
endif
# ----------------------------------------------------------
-@@ -216,7 +293,7 @@
+@@ -216,7 +293,7 @@ comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
help
Enable support for the DataFlash card.
-@@ -237,6 +314,19 @@
+@@ -237,6 +314,19 @@ config AT91_PROGRAMMABLE_CLOCKS
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
range 32 1024
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
-@@ -28,16 +28,26 @@
+@@ -28,16 +28,26 @@ obj-$(CONFIG_MACH_CARMEVA) += board-carm
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
-@@ -50,9 +60,11 @@
+@@ -50,9 +60,11 @@ obj-$(CONFIG_MACH_AT91EB01) += board-eb0
# Drivers
obj-y += leds.o
#include "generic.h"
#include "clock.h"
-@@ -288,6 +291,12 @@
+@@ -288,6 +291,12 @@ static void at91cap9_reset(void)
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
/* --------------------------------------------------------------------
* AT91CAP9 processor initialization
* -------------------------------------------------------------------- */
-@@ -298,6 +307,7 @@
+@@ -298,6 +307,7 @@ void __init at91cap9_initialize(unsigned
iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
at91_arch_reset = at91cap9_reset;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
/* Init clock subsystem */
-@@ -308,6 +318,12 @@
+@@ -308,6 +318,12 @@ void __init at91cap9_initialize(unsigned
/* Register GPIO subsystem */
at91_gpio_init(at91cap9_gpio, 4);
#include "generic.h"
-@@ -69,6 +71,9 @@
+@@ -69,6 +71,9 @@ void __init at91_add_device_usbh(struct
if (!data)
return;
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (data->vbus_pin[i])
-@@ -84,6 +89,110 @@
+@@ -84,6 +89,110 @@ void __init at91_add_device_usbh(struct
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
-@@ -246,7 +355,7 @@
+@@ -246,7 +355,7 @@ void __init at91_add_device_mmc(short mm
}
mmc0_data = *data;
platform_device_register(&at91cap9_mmc0_device);
} else { /* MCI1 */
/* CLK */
-@@ -283,10 +392,15 @@
+@@ -283,10 +392,15 @@ static struct at91_nand_data nand_data;
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
}
};
-@@ -344,6 +458,7 @@
+@@ -344,6 +458,7 @@ void __init at91_add_device_nand(struct
void __init at91_add_device_nand(struct at91_nand_data *data) {}
#endif
/* --------------------------------------------------------------------
* TWI (i2c)
* -------------------------------------------------------------------- */
-@@ -532,17 +647,64 @@
+@@ -532,17 +647,64 @@ void __init at91_add_device_spi(struct s
/* --------------------------------------------------------------------
platform_device_register(&at91cap9_rtt_device);
}
-@@ -660,6 +822,9 @@
+@@ -660,6 +822,9 @@ void __init at91_add_device_lcdc(struct
if (!data)
return;
at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
-@@ -990,7 +1155,7 @@
+@@ -990,7 +1155,7 @@ static inline void configure_usart2_pins
at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
}
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-@@ -1031,8 +1196,6 @@
+@@ -1031,8 +1196,6 @@ void __init at91_set_serial_console(unsi
{
if (portnr < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[portnr];
}
void __init at91_add_device_serial(void)
-@@ -1043,6 +1206,9 @@
+@@ -1043,6 +1206,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-@@ -1060,6 +1226,7 @@
+@@ -1060,6 +1226,7 @@ static int __init at91_add_standard_devi
{
at91_add_device_rtt();
at91_add_device_watchdog();
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
-@@ -513,7 +513,18 @@
+@@ -513,7 +513,18 @@ void __init at91_add_device_i2c(struct i
* SPI
* -------------------------------------------------------------------- */
static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi_resources[] = {
-@@ -530,7 +541,7 @@
+@@ -530,7 +541,7 @@ static struct resource spi_resources[] =
};
static struct platform_device at91rm9200_spi_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
-@@ -563,6 +574,12 @@
+@@ -563,6 +574,12 @@ void __init at91_add_device_spi(struct s
else
at91_set_gpio_output(cs_pin, 1);
/* pass chip-select pin to driver */
devices[i].controller_data = (void *) cs_pin;
-@@ -577,6 +594,90 @@
+@@ -577,6 +594,90 @@ void __init at91_add_device_spi(struct s
/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
-@@ -589,6 +690,7 @@
+@@ -589,6 +690,7 @@ static struct platform_device at91rm9200
static void __init at91_add_device_rtc(void)
{
platform_device_register(&at91rm9200_rtc_device);
}
#else
-@@ -1019,7 +1121,7 @@
+@@ -1019,7 +1121,7 @@ static inline void configure_usart3_pins
at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
}
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1110,8 +1212,6 @@
+@@ -1110,8 +1212,6 @@ void __init at91_set_serial_console(unsi
{
if (portnr < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[portnr];
}
void __init at91_add_device_serial(void)
-@@ -1122,6 +1222,9 @@
+@@ -1122,6 +1222,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
}
#else
void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1141,6 +1244,7 @@
+@@ -1141,6 +1244,7 @@ static int __init at91_add_standard_devi
{
at91_add_device_rtc();
at91_add_device_watchdog();
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
-@@ -136,8 +136,6 @@
+@@ -136,8 +136,6 @@ clkevt32k_next_event(unsigned long delta
u32 alm;
int status = 0;
#include "generic.h"
#include "clock.h"
-@@ -267,6 +269,11 @@
+@@ -267,6 +269,11 @@ static void at91sam9260_reset(void)
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
/* --------------------------------------------------------------------
* AT91SAM9260 processor initialization
-@@ -304,6 +311,7 @@
+@@ -304,6 +311,7 @@ void __init at91sam9260_initialize(unsig
iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
at91_arch_reset = at91sam9260_reset;
#include "generic.h"
-@@ -288,10 +288,15 @@
+@@ -288,10 +288,15 @@ static struct at91_nand_data nand_data;
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
}
};
-@@ -540,6 +545,90 @@
+@@ -540,6 +545,90 @@ void __init at91_add_device_spi(struct s
/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
-@@ -553,13 +642,14 @@
+@@ -553,13 +642,14 @@ static struct resource rtt_resources[] =
static struct platform_device at91sam9260_rtt_device = {
.name = "at91_rtt",
platform_device_register(&at91sam9260_rtt_device);
}
-@@ -962,7 +1052,7 @@
+@@ -962,7 +1052,7 @@ static inline void configure_usart5_pins
at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
}
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1073,8 +1163,6 @@
+@@ -1073,8 +1163,6 @@ void __init at91_set_serial_console(unsi
{
if (portnr < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[portnr];
}
void __init at91_add_device_serial(void)
-@@ -1085,6 +1173,9 @@
+@@ -1085,6 +1173,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
}
#else
void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1103,6 +1194,7 @@
+@@ -1103,6 +1194,7 @@ static int __init at91_add_standard_devi
{
at91_add_device_rtt();
at91_add_device_watchdog();
#include "generic.h"
#include "clock.h"
-@@ -245,6 +247,11 @@
+@@ -245,6 +247,11 @@ static void at91sam9261_reset(void)
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
/* --------------------------------------------------------------------
* AT91SAM9261 processor initialization
-@@ -256,6 +263,7 @@
+@@ -256,6 +263,7 @@ void __init at91sam9261_initialize(unsig
iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
at91_arch_reset = at91sam9261_reset;
#include "generic.h"
-@@ -548,6 +548,55 @@
+@@ -548,6 +548,55 @@ void __init at91_add_device_lcdc(struct
/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
-@@ -561,13 +610,14 @@
+@@ -561,13 +610,14 @@ static struct resource rtt_resources[] =
static struct platform_device at91sam9261_rtt_device = {
.name = "at91_rtt",
platform_device_register(&at91sam9261_rtt_device);
}
-@@ -938,7 +988,7 @@
+@@ -938,7 +988,7 @@ static inline void configure_usart2_pins
at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
}
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1019,8 +1069,6 @@
+@@ -1019,8 +1069,6 @@ void __init at91_set_serial_console(unsi
{
if (portnr < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[portnr];
}
void __init at91_add_device_serial(void)
-@@ -1031,6 +1079,9 @@
+@@ -1031,6 +1079,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
}
#else
void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -1050,6 +1101,7 @@
+@@ -1050,6 +1101,7 @@ static int __init at91_add_standard_devi
{
at91_add_device_rtt();
at91_add_device_watchdog();
#include "generic.h"
#include "clock.h"
-@@ -271,6 +273,11 @@
+@@ -271,6 +273,11 @@ static void at91sam9263_reset(void)
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
/* --------------------------------------------------------------------
* AT91SAM9263 processor initialization
-@@ -282,6 +289,7 @@
+@@ -282,6 +289,7 @@ void __init at91sam9263_initialize(unsig
iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
at91_arch_reset = at91sam9263_reset;
#include "generic.h"
-@@ -308,7 +308,7 @@
+@@ -308,7 +308,7 @@ void __init at91_add_device_mmc(short mm
}
mmc0_data = *data;
platform_device_register(&at91sam9263_mmc0_device);
} else { /* MCI1 */
/* CLK */
-@@ -358,10 +358,15 @@
+@@ -358,10 +358,15 @@ static struct at91_nand_data nand_data;
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
}
};
-@@ -783,6 +788,43 @@
+@@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {}
/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
-@@ -818,7 +860,9 @@
+@@ -818,7 +860,9 @@ static struct platform_device at91sam926
static void __init at91_add_device_rtt(void)
{
platform_device_register(&at91sam9263_rtt1_device);
}
-@@ -933,9 +977,6 @@
+@@ -933,9 +977,6 @@ static inline void configure_ssc1_pins(u
}
/*
* SSC controllers are accessed through library code, instead of any
* kind of all-singing/all-dancing driver. For example one could be
* used by a particular I2S audio codec's driver, while another one
-@@ -1146,7 +1187,7 @@
+@@ -1146,7 +1187,7 @@ static inline void configure_usart2_pins
at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
}
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -1227,8 +1268,6 @@
+@@ -1227,8 +1268,6 @@ void __init at91_set_serial_console(unsi
{
if (portnr < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[portnr];
}
void __init at91_add_device_serial(void)
-@@ -1239,9 +1278,12 @@
+@@ -1239,9 +1278,12 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
-@@ -1257,6 +1299,7 @@
+@@ -1257,6 +1299,7 @@ static int __init at91_add_standard_devi
{
at91_add_device_rtt();
at91_add_device_watchdog();
#include "generic.h"
#include "clock.h"
-@@ -244,6 +246,11 @@
+@@ -244,6 +246,11 @@ static void at91sam9rl_reset(void)
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
/* --------------------------------------------------------------------
* AT91SAM9RL processor initialization
-@@ -274,6 +281,7 @@
+@@ -274,6 +281,7 @@ void __init at91sam9rl_initialize(unsign
iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
at91_arch_reset = at91sam9rl_reset;
* MMC / SD
* -------------------------------------------------------------------- */
-@@ -105,10 +200,15 @@
+@@ -105,10 +200,15 @@ static struct at91_nand_data nand_data;
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
}
};
-@@ -385,6 +485,100 @@
+@@ -385,6 +485,100 @@ void __init at91_add_device_lcdc(struct
/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
-@@ -397,6 +591,7 @@
+@@ -397,6 +591,7 @@ static struct platform_device at91sam9rl
static void __init at91_add_device_rtc(void)
{
platform_device_register(&at91sam9rl_rtc_device);
}
#else
-@@ -418,13 +613,14 @@
+@@ -418,13 +613,14 @@ static struct resource rtt_resources[] =
static struct platform_device at91sam9rl_rtt_device = {
.name = "at91_rtt",
platform_device_register(&at91sam9rl_rtt_device);
}
-@@ -539,9 +735,6 @@
+@@ -539,9 +735,6 @@ static inline void configure_ssc1_pins(u
}
/*
* SSC controllers are accessed through library code, instead of any
* kind of all-singing/all-dancing driver. For example one could be
* used by a particular I2S audio codec's driver, while another one
-@@ -802,7 +995,7 @@
+@@ -802,7 +995,7 @@ static inline void configure_usart3_pins
at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
}
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-@@ -893,8 +1086,6 @@
+@@ -893,8 +1086,6 @@ void __init at91_set_serial_console(unsi
{
if (portnr < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[portnr];
}
void __init at91_add_device_serial(void)
-@@ -905,6 +1096,9 @@
+@@ -905,6 +1096,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
}
#else
void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
-@@ -925,6 +1119,7 @@
+@@ -925,6 +1119,7 @@ static int __init at91_add_standard_devi
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_watchdog();
#include "generic.h"
-@@ -78,6 +76,12 @@
+@@ -78,6 +76,12 @@ static struct at91_usbh_data __initdata
.ports = 2,
};
/*
* ADS7846 Touchscreen
-@@ -130,7 +134,7 @@
+@@ -130,7 +134,7 @@ static struct spi_board_info cap9adk_spi
{
.modalias = "ads7846",
.chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
.bus_num = 0,
.platform_data = &ads_info,
.irq = AT91_PIN_PC4,
-@@ -324,8 +328,9 @@
+@@ -324,8 +328,9 @@ static void __init cap9adk_board_init(vo
/* Serial */
at91_add_device_serial();
/* USB Host */
/* SPI */
at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
/* Touchscreen */
-@@ -341,7 +346,6 @@
+@@ -341,7 +346,6 @@ static void __init cap9adk_board_init(vo
/* I2C */
at91_add_device_i2c(NULL, 0);
/* LCD Controller */
}
static void __init carmeva_init_irq(void)
-@@ -117,6 +114,30 @@
+@@ -117,6 +114,30 @@ static struct spi_board_info carmeva_spi
},
};
static void __init carmeva_board_init(void)
{
/* Serial */
-@@ -135,6 +156,8 @@
+@@ -135,6 +156,8 @@ static void __init carmeva_board_init(vo
// at91_add_device_cf(&carmeva_cf_data);
/* MMC */
at91_add_device_mmc(0, &carmeva_mmc_data);
+MACHINE_END
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
-@@ -61,6 +61,7 @@
+@@ -61,6 +61,7 @@ static void __init csb337_map_io(void)
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Setup the serial ports and console */
at91_init_serial(&csb337_uart_config);
-@@ -202,11 +203,11 @@
+@@ -202,11 +203,11 @@ static struct platform_device csb300_but
static void __init csb300_add_device_buttons(void)
{
at91_set_deglitch(AT91_PIN_PA21, 1);
platform_device_register(&csb300_button_device);
-@@ -233,7 +234,7 @@
+@@ -233,7 +234,7 @@ static struct gpio_led csb_leds[] = {
.gpio = AT91_PIN_PB0,
.active_low = 1,
.default_trigger = "ide-disk",
}
static void __init csb637_init_irq(void)
-@@ -118,8 +107,19 @@
+@@ -118,8 +107,19 @@ static struct platform_device csb_flash
.num_resources = ARRAY_SIZE(csb_flash_resources),
};
static void __init dk_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
-@@ -64,8 +54,16 @@
+@@ -64,8 +54,16 @@ static void __init dk_map_io(void)
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
}
static void __init dk_init_irq(void)
-@@ -73,6 +71,185 @@
+@@ -73,6 +71,185 @@ static void __init dk_init_irq(void)
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
-@@ -164,7 +341,7 @@
+@@ -164,7 +341,7 @@ static struct at91_nand_data __initdata
#define DK_FLASH_SIZE 0x200000
static struct physmap_flash_data dk_flash_data = {
};
static struct resource dk_flash_resource = {
-@@ -223,8 +400,12 @@
+@@ -223,8 +400,12 @@ static void __init dk_board_init(void)
platform_device_register(&dk_flash);
/* LEDs */
at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
static void __init ek_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
-@@ -64,8 +54,16 @@
+@@ -64,8 +54,16 @@ static void __init ek_map_io(void)
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
}
static void __init ek_init_irq(void)
-@@ -73,6 +71,187 @@
+@@ -73,6 +71,187 @@ static void __init ek_init_irq(void)
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
-@@ -122,7 +301,7 @@
+@@ -122,7 +301,7 @@ static struct i2c_board_info __initdata
#define EK_FLASH_SIZE 0x200000
static struct physmap_flash_data ek_flash_data = {
};
static struct resource ek_flash_resource = {
-@@ -189,7 +368,7 @@
+@@ -189,7 +368,7 @@ static void __init ek_board_init(void)
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* VGA */
static void __init kb9202_map_io(void)
{
-@@ -59,8 +50,20 @@
+@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void)
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
}
static void __init kb9202_init_irq(void)
-@@ -111,6 +114,48 @@
+@@ -111,6 +114,48 @@ static struct at91_nand_data __initdata
.partition_info = nand_partitions,
};
static void __init kb9202_board_init(void)
{
/* Serial */
-@@ -129,6 +174,8 @@
+@@ -129,6 +174,8 @@ static void __init kb9202_board_init(voi
at91_add_device_spi(NULL, 0);
/* NAND */
at91_add_device_nand(&kb9202_nand_data);
}
static void __init ek_init_irq(void)
-@@ -85,6 +89,35 @@
+@@ -85,6 +89,35 @@ static struct at91_udc_data __initdata e
/*
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-@@ -110,6 +143,8 @@
+@@ -110,6 +143,8 @@ static struct spi_board_info ek_spi_devi
.chip_select = 0,
.max_speed_hz = 10 * 1000 * 1000,
.bus_num = 1,
},
#endif
};
-@@ -172,6 +207,74 @@
+@@ -172,6 +207,74 @@ static struct at91_mmc_data __initdata e
// .vcc_pin = ... not connected
};
static void __init ek_board_init(void)
{
/* Serial */
-@@ -190,6 +293,16 @@
+@@ -190,6 +293,16 @@ static void __init ek_board_init(void)
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
static void __init ek_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
-@@ -68,8 +60,11 @@
+@@ -68,8 +60,11 @@ static void __init ek_map_io(void)
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
}
static void __init ek_init_irq(void)
-@@ -239,6 +234,35 @@
+@@ -239,6 +234,35 @@ static void __init ek_add_device_ts(void
#endif
/*
* SPI devices
*/
static struct spi_board_info ek_spi_devices[] = {
-@@ -252,10 +276,11 @@
+@@ -252,10 +276,11 @@ static struct spi_board_info ek_spi_devi
{
.modalias = "ads7846",
.chip_select = 2,
},
#endif
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-@@ -271,6 +296,9 @@
+@@ -271,6 +296,9 @@ static struct spi_board_info ek_spi_devi
.chip_select = 3,
.max_speed_hz = 10 * 1000 * 1000,
.bus_num = 0,
},
#endif
};
-@@ -408,24 +436,28 @@
+@@ -408,24 +436,28 @@ static struct gpio_keys_button ek_button
.code = BTN_0,
.desc = "Button 0",
.active_low = 1,
}
};
-@@ -445,13 +477,13 @@
+@@ -445,13 +477,13 @@ static struct platform_device ek_button_
static void __init ek_add_device_buttons(void)
{
at91_set_deglitch(AT91_PIN_PA24, 1);
platform_device_register(&ek_button_device);
-@@ -460,6 +492,29 @@
+@@ -460,6 +492,29 @@ static void __init ek_add_device_buttons
static void __init ek_add_device_buttons(void) {}
#endif
static void __init ek_board_init(void)
{
/* Serial */
-@@ -481,6 +536,9 @@
+@@ -481,6 +536,9 @@ static void __init ek_board_init(void)
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* Touchscreen */
ek_add_device_ts();
#else
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
-@@ -489,6 +547,11 @@
+@@ -489,6 +547,11 @@ static void __init ek_board_init(void)
at91_add_device_lcdc(&ek_lcdc_data);
/* Push Buttons */
ek_add_device_buttons();
}
static void __init ek_init_irq(void)
-@@ -141,7 +136,7 @@
+@@ -141,7 +136,7 @@ static struct spi_board_info ek_spi_devi
{
.modalias = "ads7846",
.chip_select = 3,
.bus_num = 0,
.platform_data = &ads_info,
.irq = AT91SAM9263_ID_IRQ1,
-@@ -301,9 +296,9 @@
+@@ -301,9 +296,9 @@ static struct platform_device ek_button_
static void __init ek_add_device_buttons(void)
{
at91_set_deglitch(AT91_PIN_PC4, 1);
platform_device_register(&ek_button_device);
-@@ -341,7 +336,7 @@
+@@ -341,7 +336,7 @@ static struct gpio_led ek_leds[] = {
.name = "ds3",
.gpio = AT91_PIN_PB7,
.default_trigger = "heartbeat",
};
-@@ -374,6 +369,9 @@
+@@ -374,6 +369,9 @@ static void __init ek_board_init(void)
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
static void __init ek_init_irq(void)
-@@ -61,6 +56,14 @@
+@@ -61,6 +56,14 @@ static void __init ek_init_irq(void)
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
-@@ -180,6 +183,8 @@
+@@ -180,6 +183,8 @@ static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
-@@ -190,6 +195,9 @@
+@@ -190,6 +195,9 @@ static void __init ek_board_init(void)
at91_add_device_mmc(0, &ek_mmc_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/*
-@@ -113,12 +114,34 @@
+@@ -113,12 +114,34 @@ static void pmc_sys_mode(struct clk *clk
at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
}
static struct clk uhpck = {
.name = "uhpck",
.parent = &pllb,
-@@ -254,6 +277,23 @@
+@@ -254,6 +277,23 @@ EXPORT_SYMBOL(clk_get_rate);
/*------------------------------------------------------------------------*/
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
/*
-@@ -362,7 +402,7 @@
+@@ -362,7 +402,7 @@ static void __init init_programmable_clo
static int at91_clk_show(struct seq_file *s, void *unused)
{
struct clk *clk;
seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
-@@ -370,7 +410,10 @@
+@@ -370,7 +410,10 @@ static int at91_clk_show(struct seq_file
seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-@@ -383,6 +426,8 @@
+@@ -383,6 +426,8 @@ static int at91_clk_show(struct seq_file
state = (scsr & clk->pmc_mask) ? "on" : "off";
else if (clk->mode == pmc_periph_mode)
state = (pcsr & clk->pmc_mask) ? "on" : "off";
else if (clk->pmc_mask)
state = (sr & clk->pmc_mask) ? "on" : "off";
else if (clk == &clk32k || clk == &main_clk)
-@@ -583,6 +628,17 @@
+@@ -583,6 +628,17 @@ int __init at91_clock_init(unsigned long
uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
/*
* MCK and CPU derive from one of those primary clocks.
* For now, assume this parentage won't change.
*/
-@@ -599,6 +655,9 @@
+@@ -599,6 +655,9 @@ int __init at91_clock_init(unsigned long
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
-@@ -41,6 +41,7 @@
+@@ -41,6 +41,7 @@ extern void __init at91_clock_associate(
/* Power Management */
extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
-@@ -490,7 +490,8 @@
+@@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init
/*--------------------------------------------------------------------------*/
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key gpio_lock_class;
-@@ -557,6 +558,7 @@
+@@ -557,6 +558,7 @@ void __init at91_gpio_init(struct at91_g
data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
static int at91_pm_valid_state(suspend_state_t state)
{
-@@ -62,6 +194,7 @@
+@@ -62,6 +194,7 @@ static int at91_pm_begin(suspend_state_t
* Verify that all the clocks are correct before entering
* slow-clock mode.
*/
static int at91_pm_verify_clocks(void)
{
unsigned long scsr;
-@@ -107,24 +240,24 @@
+@@ -107,24 +240,24 @@ static int at91_pm_verify_clocks(void)
}
/*
static int at91_pm_enter(suspend_state_t state)
{
-@@ -158,11 +291,14 @@
+@@ -158,11 +291,14 @@ static int at91_pm_enter(suspend_state_t
* turning off the main oscillator; reverse on wakeup.
*/
if (slow_clock) {
/* FALLTHROUGH leaving master clock alone */
}
-@@ -175,13 +311,15 @@
+@@ -175,13 +311,15 @@ static int at91_pm_enter(suspend_state_t
case PM_SUSPEND_STANDBY:
/*
* NOTE: the Wait-for-Interrupt instruction needs to be
case PM_SUSPEND_ON:
asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
-@@ -196,6 +334,7 @@
+@@ -196,6 +334,7 @@ static int at91_pm_enter(suspend_state_t
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
error:
target_state = PM_SUSPEND_ON;
at91_irq_resume();
at91_gpio_resume();
-@@ -220,21 +359,20 @@
+@@ -220,21 +359,20 @@ static struct platform_suspend_ops at91_
static int __init at91_pm_init(void)
{
+ .word .-at91_slow_clock
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
-@@ -11,5 +11,8 @@
+@@ -11,5 +11,8 @@ obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
-@@ -176,6 +176,27 @@
+@@ -176,6 +176,27 @@ static void __init ks8695_add_device_wat
#endif
/*
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
-@@ -136,9 +136,9 @@
+@@ -136,9 +136,9 @@ int __init_or_module gpio_direction_outp
/* set line state */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
if (state)
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
/* set pin as output */
-@@ -168,9 +168,9 @@
+@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, un
/* set output line state */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
if (state)
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
local_irq_restore(flags);
-@@ -189,7 +189,7 @@
+@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin)
return -EINVAL;
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+__initcall(leds_init);
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
-@@ -141,7 +141,7 @@
+@@ -141,7 +141,7 @@ static struct pci_ops ks8695_pci_ops = {
.write = ks8695_pci_writeconfig,
};
}
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
-@@ -1056,5 +1056,21 @@
+@@ -1056,5 +1056,21 @@ config DEVPORT
source "drivers/s390/char/Kconfig"
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
-@@ -98,6 +98,8 @@
+@@ -98,6 +98,8 @@ obj-$(CONFIG_GPIO_DEVICE) += gpio_dev.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -88,6 +88,14 @@
+@@ -88,6 +88,14 @@ config I2C_AT91
to support combined I2C messages. Use the i2c-gpio driver
unless your system can cope with those limitations.
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
depends on SOC_AU1550 || SOC_AU1200
-@@ -626,6 +634,14 @@
+@@ -626,6 +634,14 @@ config I2C_VOODOO3
This driver can also be built as a module. If so, the module
will be called i2c-voodoo3.
depends on ISA
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -29,6 +29,7 @@
+@@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
static struct clk *twi_clk;
static void __iomem *twi_base;
-@@ -53,7 +56,7 @@
+@@ -53,7 +56,7 @@ static void __devinit at91_twi_hwinit(vo
at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
/* Calcuate clock dividers */
cdiv = cdiv + 1; /* round up */
ckdiv = 0;
while (cdiv > 255) {
-@@ -61,11 +64,12 @@
+@@ -61,11 +64,12 @@ static void __devinit at91_twi_hwinit(vo
cdiv = cdiv >> 1;
}
+MODULE_LICENSE("GPL");
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
-@@ -659,13 +659,14 @@
+@@ -659,13 +659,14 @@ static void at91_mci_set_ios(struct mmc_
/* maybe switch power to the card */
if (host->board->vcc_pin) {
switch (ios->power_mode) {
}
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
-@@ -270,5 +270,17 @@
+@@ -270,5 +270,17 @@ config MTD_DOCPROBE_55AA
LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
you have managed to wipe the first block.
+endmenu
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,4 @@
+@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
-@@ -273,12 +273,53 @@
+@@ -273,12 +273,53 @@ config MTD_NAND_CS553X
If you say "m", the module will be called "cs553x_nand.ko".
config MTD_NAND_AT91
* Hardware specific access to control-lines
*/
static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-@@ -44,6 +113,13 @@
+@@ -44,6 +113,13 @@ static void at91_nand_cmd_ctrl(struct mt
struct nand_chip *nand_chip = mtd->priv;
struct at91_nand_host *host = nand_chip->priv;
if (cmd == NAND_CMD_NONE)
return;
-@@ -65,27 +141,249 @@
+@@ -65,27 +141,249 @@ static int at91_nand_device_ready(struct
}
/*
/*
* Probe for the NAND device.
*/
-@@ -94,6 +392,8 @@
+@@ -94,6 +392,8 @@ static int __init at91_nand_probe(struct
struct at91_nand_host *host;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
int res;
#ifdef CONFIG_MTD_PARTITIONS
-@@ -108,8 +408,13 @@
+@@ -108,8 +408,13 @@ static int __init at91_nand_probe(struct
return -ENOMEM;
}
if (host->io_base == NULL) {
printk(KERN_ERR "at91_nand: ioremap failed\n");
kfree(host);
-@@ -119,6 +424,7 @@
+@@ -119,6 +424,7 @@ static int __init at91_nand_probe(struct
mtd = &host->mtd;
nand_chip = &host->nand_chip;
host->board = pdev->dev.platform_data;
nand_chip->priv = host; /* link the private data structures */
mtd->priv = nand_chip;
-@@ -132,11 +438,40 @@
+@@ -132,11 +438,40 @@ static int __init at91_nand_probe(struct
if (host->board->rdy_pin)
nand_chip->dev_ready = at91_nand_device_ready;
platform_set_drvdata(pdev, host);
at91_nand_enable(host);
-@@ -149,8 +484,60 @@
+@@ -149,8 +484,60 @@ static int __init at91_nand_probe(struct
}
}
res = -ENXIO;
goto out;
}
-@@ -179,8 +566,11 @@
+@@ -179,8 +566,11 @@ static int __init at91_nand_probe(struct
if (!res)
return res;
out:
at91_nand_disable(host);
platform_set_drvdata(pdev, NULL);
-@@ -192,7 +582,7 @@
+@@ -192,7 +582,7 @@ out:
/*
* Remove a NAND device.
*/
{
struct at91_nand_host *host = platform_get_drvdata(pdev);
struct mtd_info *mtd = &host->mtd;
-@@ -208,8 +598,7 @@
+@@ -208,8 +598,7 @@ static int __devexit at91_nand_remove(st
}
static struct platform_driver at91_nand_driver = {
.driver = {
.name = "at91_nand",
.owner = THIS_MODULE,
-@@ -218,7 +607,7 @@
+@@ -218,7 +607,7 @@ static struct platform_driver at91_nand_
static int __init at91_nand_init(void)
{
}
-@@ -233,4 +622,4 @@
+@@ -233,4 +622,4 @@ module_exit(at91_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9");
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
-@@ -47,3 +47,10 @@
+@@ -47,3 +47,10 @@ config EP93XX_ETH
help
This is a driver for the ethernet hardware included in EP93xx CPUs.
Say Y if you are building a kernel for EP93xx based devices.
+ and enable Ethernet support, then select this option.
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
-@@ -9,3 +9,4 @@
+@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
+obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695_ether.o
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
-@@ -220,7 +220,7 @@
+@@ -220,7 +220,7 @@ static irqreturn_t at91ether_phy_interru
if (!(phy & (1 << 0)))
goto done;
}
read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
if (!(phy & ((1 << 2) | 1)))
goto done;
-@@ -286,7 +286,7 @@
+@@ -286,7 +286,7 @@ static void enable_phyirq(struct net_dev
dsintr = (1 << 15) | ( 1 << 14);
write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
}
dsintr = (1 << 10) | ( 1 << 8);
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
}
-@@ -341,7 +341,7 @@
+@@ -341,7 +341,7 @@ static void disable_phyirq(struct net_de
dsintr = ~(1 << 14);
write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
}
read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
dsintr = ~((1 << 10) | (1 << 8));
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
-@@ -820,7 +820,7 @@
+@@ -820,7 +820,7 @@ static int at91ether_tx(struct sk_buff *
lp->skb = skb;
lp->skb_length = skb->len;
lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
/* Set address of the data in the Transmit Address register */
at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
-@@ -843,34 +843,32 @@
+@@ -843,34 +843,32 @@ static int at91ether_tx(struct sk_buff *
*/
static struct net_device_stats *at91ether_stats(struct net_device *dev)
{
}
/*
-@@ -896,16 +894,16 @@
+@@ -896,16 +894,16 @@ static void at91ether_rx(struct net_devi
skb->protocol = eth_type_trans(skb, dev);
dev->last_rx = jiffies;
dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE; /* reset ownership bit */
if (lp->rxBuffIndex == MAX_RX_DESCR-1) /* wrap after last buffer */
-@@ -934,7 +932,7 @@
+@@ -934,7 +932,7 @@ static irqreturn_t at91ether_interrupt(i
if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */
/* The TCOM bit is set even if the transmission failed. */
if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
if (lp->skb) {
dev_kfree_skb_irq(lp->skb);
-@@ -978,15 +976,22 @@
+@@ -978,15 +976,22 @@ static int __init at91ether_setup(unsign
struct net_device *dev;
struct at91_private *lp;
unsigned int val;
/* Install the interrupt handler */
if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
-@@ -1043,7 +1048,9 @@
+@@ -1043,7 +1048,9 @@ static int __init at91ether_setup(unsign
} else if (machine_is_csb337()) {
/* mix link activity status into LED2 link state */
write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
disable_mdi();
spin_unlock_irq(&lp->lock);
-@@ -1058,12 +1065,12 @@
+@@ -1058,12 +1065,12 @@ static int __init at91ether_setup(unsign
lp->phy_address = phy_address; /* MDI address of PHY */
/* Register the network interface */
}
/* Determine current link speed */
-@@ -1101,6 +1108,8 @@
+@@ -1101,6 +1108,8 @@ static int __init at91ether_setup(unsign
printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
else if (phy_type == MII_AC101L_ID)
printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
else if (phy_type == MII_KS8721_ID)
printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
else if (phy_type == MII_T78Q21x3_ID)
-@@ -1146,6 +1155,7 @@
+@@ -1146,6 +1155,7 @@ static int __init at91ether_probe(struct
case MII_DP83847_ID: /* National Semiconductor DP83847: */
case MII_DP83848_ID: /* National Semiconductor DP83848: */
case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
-@@ -1246,3 +1256,4 @@
+@@ -1246,3 +1256,4 @@ module_exit(at91ether_exit)
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
MODULE_AUTHOR("Andrew Victor");
/* Micrel KS8721 PHY */
#define MII_KS8721_ID 0x00221610
-@@ -84,7 +87,6 @@
+@@ -84,7 +87,6 @@ struct recv_desc_bufs
struct at91_private
{
+#endif
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
-@@ -487,12 +487,12 @@
+@@ -487,12 +487,12 @@ config RTC_DRV_AT91RM9200
this is powered by the backup power supply.
config RTC_DRV_AT91SAM9
#include <asm/arch/at91_rtc.h>
-@@ -307,12 +304,6 @@
+@@ -307,12 +304,6 @@ static int __init at91_rtc_probe(struct
return ret;
}
#include <asm/arch/at91_rtt.h>
-@@ -150,6 +151,9 @@
+@@ -150,6 +151,9 @@ static int at91_rtc_settime(struct devic
return 0;
}
static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
-@@ -176,6 +180,9 @@
+@@ -176,6 +180,9 @@ static int at91_rtc_readalarm(struct dev
return 0;
}
static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
-@@ -321,10 +328,6 @@
+@@ -321,10 +328,6 @@ static int __init at91_rtc_probe(struct
if (!rtc)
return -ENOMEM;
rtc->rtt += r->start;
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -113,6 +113,15 @@
+@@ -113,6 +113,15 @@ config SPI_GPIO
If unsure, say N.
depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -29,6 +29,7 @@
+@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
+MODULE_ALIAS("platform:at91_spi");
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
-@@ -118,10 +118,10 @@
+@@ -118,10 +118,10 @@ config USB_AMD5536UDC
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
select USB_GADGET_DUALSPEED
tristate
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
-@@ -1827,7 +1827,7 @@
+@@ -1827,7 +1827,7 @@ static int at91udc_suspend(struct platfo
*/
if ((!udc->suspended && udc->addr)
|| !wake
#ifdef CONFIG_USB_GADGET_DEBUG_FS
#include <linux/debugfs.h>
-@@ -324,53 +326,6 @@
+@@ -324,53 +326,6 @@ static int vbus_is_present(struct usba_u
return 1;
}
static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
{
unsigned int transaction_len;
-@@ -387,7 +342,7 @@
+@@ -387,7 +342,7 @@ static void next_fifo_transaction(struct
ep->ep.name, req, transaction_len,
req->last_transaction ? ", done" : "");
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
req->req.actual += transaction_len;
}
-@@ -476,7 +431,7 @@
+@@ -476,7 +431,7 @@ static void receive_data(struct usba_ep
bytecount = req->req.length - req->req.actual;
}
ep->fifo, bytecount);
req->req.actual += bytecount;
-@@ -1029,33 +984,6 @@
+@@ -1029,33 +984,6 @@ static const struct usb_gadget_ops usba_
.set_selfpowered = usba_udc_set_selfpowered,
};
static struct usb_endpoint_descriptor usba_ep0_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
-@@ -1074,7 +1002,6 @@
+@@ -1074,7 +1002,6 @@ static void nop_release(struct device *d
static struct usba_udc the_udc = {
.gadget = {
.ops = &usba_udc_ops,
.ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
.is_dualspeed = 1,
.name = "atmel_usba_udc",
-@@ -1231,7 +1158,7 @@
+@@ -1231,7 +1158,7 @@ static int do_test_mode(struct usba_udc
} else {
usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
usba_writel(udc, TST, USBA_TST_PKT_MODE);
sizeof(test_packet_buffer));
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
dev_info(dev, "Entering Test_Packet mode...\n");
-@@ -1530,13 +1457,13 @@
+@@ -1530,13 +1457,13 @@ restart:
DBG(DBG_HW, "Packet length: %u\n", pkt_len);
if (pkt_len != sizeof(crq)) {
pr_warning("udc: Invalid packet length %u "
/* Free up one bank in the FIFO so that we can
* generate or receive a reply right away. */
-@@ -1908,7 +1835,7 @@
+@@ -1908,7 +1835,7 @@ static int __init usba_udc_probe(struct
regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
return -ENXIO;
irq = platform_get_irq(pdev, 0);
-@@ -1956,16 +1883,44 @@
+@@ -1956,16 +1883,44 @@ static int __init usba_udc_probe(struct
usba_writel(udc, CTRL, 0);
clk_disable(pclk);
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
}
-@@ -1984,7 +1939,7 @@
+@@ -1984,7 +1939,7 @@ static int __init usba_udc_probe(struct
goto err_device_add;
}
if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
udc->vbus_pin = pdata->vbus_pin;
-@@ -2004,7 +1959,7 @@
+@@ -2004,7 +1959,7 @@ static int __init usba_udc_probe(struct
}
usba_init_debugfs(udc);
usba_ep_init_debugfs(udc, &usba_ep[i]);
return 0;
-@@ -2012,6 +1967,8 @@
+@@ -2012,6 +1967,8 @@ static int __init usba_udc_probe(struct
err_device_add:
free_irq(irq, udc);
err_request_irq:
iounmap(udc->fifo);
err_map_fifo:
iounmap(udc->regs);
-@@ -2029,10 +1986,11 @@
+@@ -2029,10 +1986,11 @@ static int __exit usba_udc_remove(struct
{
struct usba_udc *udc;
int i;
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
-@@ -330,7 +330,7 @@
+@@ -330,7 +330,7 @@ ohci_hcd_at91_drv_suspend(struct platfor
*
* REVISIT: some boards will be able to turn VBUS off...
*/
}
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
-@@ -889,6 +889,17 @@
+@@ -889,6 +889,17 @@ config FB_EPSON1355
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
depends on FB
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
-@@ -87,7 +87,8 @@
+@@ -87,7 +87,8 @@ obj-$(CONFIG_FB_G364) += g36
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
#define ATMEL_LCDC_FIFO_SIZE 2048
#else
#define ATMEL_LCDC_FIFO_SIZE 512
-@@ -903,11 +903,45 @@
+@@ -903,11 +903,45 @@ static int __exit atmel_lcdfb_remove(str
return 0;
}
.owner = THIS_MODULE,
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
-@@ -112,3 +112,11 @@
+@@ -112,3 +112,11 @@ config BACKLIGHT_CARILLO_RANCH
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
backlight driver.
+ backlight driver.
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
-@@ -10,3 +10,4 @@
+@@ -10,3 +10,4 @@ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomo
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
+MODULE_LICENSE("GPL");
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -66,6 +66,14 @@
+@@ -66,6 +66,14 @@ config AT91RM9200_WATCHDOG
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
system when the timeout is reached.
depends on FOOTBRIDGE
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
-@@ -26,6 +26,7 @@
+@@ -26,6 +26,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.
# ARM Architecture
obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
/* USB Device */
struct at91_udc_data {
-@@ -45,6 +46,9 @@
+@@ -45,6 +46,9 @@ struct at91_udc_data {
};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
/* Compact Flash */
struct at91_cf_data {
u8 irq_pin; /* I/O IRQ */
-@@ -158,6 +162,9 @@
+@@ -158,6 +162,9 @@ extern void __init at91_add_device_ac97(
/* ISI */
extern void __init at91_add_device_isi(void);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
-@@ -48,6 +48,17 @@
+@@ -48,6 +48,17 @@ static inline unsigned long at91_arch_id
return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
}
#ifdef CONFIG_ARCH_AT91RM9200
#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
-@@ -83,8 +94,12 @@
+@@ -83,8 +94,12 @@ static inline unsigned long at91_arch_id
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#elif defined(CONFIG_ARCH_AT91SAM9RL)
--- a/include/asm-arm/arch-ks8695/devices.h
+++ b/include/asm-arm/arch-ks8695/devices.h
-@@ -18,6 +18,11 @@
+@@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan
extern void __init ks8695_add_device_lan(void);
extern void __init ks8695_add_device_hpna(void);
#define KS8695_MODE_MINIPCI 1
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
-@@ -121,4 +121,24 @@
+@@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru
*/
struct clk *clk_get_parent(struct clk *clk);
+
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
-@@ -39,6 +39,7 @@
+@@ -39,6 +39,7 @@ struct atmel_lcdfb_info {
u8 bl_power;
#endif
bool lcdcon_is_backlight;
static struct clk *pck1_clk;
static struct clk *pllb_clk;
-@@ -276,7 +268,6 @@
+@@ -276,7 +268,6 @@ static struct platform_device *eti_b1_sn
static int __init eti_b1_init(void)
{
int ret;
struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -310,19 +301,12 @@
+@@ -310,19 +301,12 @@ static int __init eti_b1_init(void)
goto fail_io_unmap;
}
* Set PCK1 parent to PLLB and its rate to 12 Mhz.
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
-@@ -114,7 +114,11 @@
+@@ -114,7 +114,11 @@ snd_at73c213_write_reg(struct snd_at73c2
static struct snd_pcm_hardware snd_at73c213_playback_hw = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER,
projects / openwrt.git / blobdiff