#
-# Copyright (C) 2006-2008 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
OTHER_MENU:=Other modules
-define KernelPackage/crc-itu-t
+WATCHDOG_DIR:=watchdog
+
+
+define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC ITU-T V.41 support
- KCONFIG:=CONFIG_CRC_ITU_T
- FILES:=$(LINUX_DIR)/lib/crc-itu-t.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
+ TITLE:=Bluetooth support
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core
+ KCONFIG:= \
+ CONFIG_BLUEZ \
+ CONFIG_BLUEZ_L2CAP \
+ CONFIG_BLUEZ_SCO \
+ CONFIG_BLUEZ_RFCOMM \
+ CONFIG_BLUEZ_BNEP \
+ CONFIG_BLUEZ_HCIUART \
+ CONFIG_BLUEZ_HCIUSB \
+ CONFIG_BLUEZ_HIDP \
+ CONFIG_BT \
+ CONFIG_BT_L2CAP \
+ CONFIG_BT_SCO \
+ CONFIG_BT_RFCOMM \
+ CONFIG_BT_BNEP \
+ CONFIG_BT_HCIBTUSB \
+ CONFIG_BT_HCIUSB \
+ CONFIG_BT_HCIUART \
+ CONFIG_BT_HIDP
+ $(call AddDepends/crc16)
+ $(call AddDepends/hid)
+ $(call AddDepends/rfkill)
+ FILES:= \
+ $(LINUX_DIR)/net/bluetooth/bluetooth.ko \
+ $(LINUX_DIR)/net/bluetooth/l2cap.ko \
+ $(LINUX_DIR)/net/bluetooth/sco.ko \
+ $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
+ $(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
+ $(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.ko
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
endef
-define KernelPackage/crc-itu-t/description
- Kernel module for CRC ITU-T V.41 support
+define KernelPackage/bluetooth/description
+ Kernel support for Bluetooth devices
endef
-$(eval $(call KernelPackage,crc-itu-t))
+$(eval $(call KernelPackage,bluetooth))
+
define KernelPackage/crc-ccitt
SUBMENU:=$(OTHER_MENU)
TITLE:=CRC-CCITT support
KCONFIG:=CONFIG_CRC_CCITT
- FILES:=$(LINUX_DIR)/lib/crc-ccitt.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/lib/crc-ccitt.ko
AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
endef
$(eval $(call KernelPackage,crc-ccitt))
+define KernelPackage/crc-itu-t
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC ITU-T V.41 support
+ KCONFIG:=CONFIG_CRC_ITU_T
+ FILES:=$(LINUX_DIR)/lib/crc-itu-t.ko
+ AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
+endef
+
+define KernelPackage/crc-itu-t/description
+ Kernel module for CRC ITU-T V.41 support
+endef
+
+$(eval $(call KernelPackage,crc-itu-t))
+
+
define KernelPackage/crc7
SUBMENU:=$(OTHER_MENU)
TITLE:=CRC7 support
KCONFIG:=CONFIG_CRC7
- FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/lib/crc7.ko
AUTOLOAD:=$(call AutoLoad,20,crc7)
endef
$(eval $(call KernelPackage,crc7))
+define KernelPackage/crc16
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC16 support
+ KCONFIG:=CONFIG_CRC16
+ FILES:=$(LINUX_DIR)/lib/crc16.ko
+ AUTOLOAD:=$(call AutoLoad,20,crc16,1)
+ $(call SetDepends/crc16)
+endef
+
+define KernelPackage/crc16/description
+ Kernel module for CRC16 support
+endef
+
+$(eval $(call KernelPackage,crc16))
+
+
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
- DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_EEPROM_93CX6
- FILES:=$(LINUX_DIR)/drivers/misc/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
$(eval $(call KernelPackage,eeprom-93cx6))
-define KernelPackage/lp
+define KernelPackage/gpio-cs5535
SUBMENU:=$(OTHER_MENU)
- TITLE:=Parallel port and line printer support
- DEPENDS:=@LINUX_2_4
- KCONFIG:= \
- CONFIG_PARPORT \
- CONFIG_PRINTER \
- CONFIG_PPDEV
- FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,parport lp)
+ TITLE:=AMD CS5535/CS5536 GPIO driver
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_CS5535_GPIO
+ FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.ko
+ AUTOLOAD:=$(call AutoLoad,50,cs5535_gpio)
endef
-$(eval $(call KernelPackage,lp))
+define KernelPackage/gpio-cs5535/description
+ This package contains the AMD CS5535/CS5536 GPIO driver
+endef
+
+$(eval $(call KernelPackage,gpio-cs5535))
-define KernelPackage/pcmcia-core
+define KernelPackage/gpio-dev
SUBMENU:=$(OTHER_MENU)
- TITLE:=PCMCIA/CardBus support
- DEPENDS:=@PCMCIA_SUPPORT
- KCONFIG:= \
- CONFIG_PCMCIA \
- CONFIG_CARDBUS \
- CONFIG_PCCARD \
- CONFIG_YENTA \
- CONFIG_PCCARD_NONSTATIC \
- PCMCIA_DEBUG=n
-endef
-
-define KernelPackage/pcmcia-core/2.4
-# KCONFIG:= \
-# CONFIG_PCMCIA \
-# CONFIG_CARDBUS
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core ds)
-endef
-
-define KernelPackage/pcmcia-core/2.6
-# KCONFIG:= \
-# CONFIG_PCCARD \
-# CONFIG_PCMCIA \
-# CONFIG_YENTA \
-# CONFIG_PCCARD_NONSTATIC \
-# PCMCIA_DEBUG=n
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic)
+ TITLE:=Generic GPIO char device support
+ DEPENDS:=@GPIO_SUPPORT
+ KCONFIG:=CONFIG_GPIO_DEVICE
+ FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
+ AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
endef
-define KernelPackage/pcmcia-core/description
- Kernel support for PCMCIA/CardBus controllers
+define KernelPackage/gpio-dev/description
+ Kernel module to allows control of GPIO pins using a character device.
endef
-$(eval $(call KernelPackage,pcmcia-core))
+$(eval $(call KernelPackage,gpio-dev))
-define KernelPackage/pcmcia-yenta
+define KernelPackage/gpio-nsc
SUBMENU:=$(OTHER_MENU)
- TITLE:=yenta socket driver
- DEPENDS:=kmod-pcmcia-core
- KCONFIG:=CONFIG_YENTA
- FILES:=$(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,yenta_socket)
+ TITLE:=Natsemi GPIO support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_NSC_GPIO
+ FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.ko
+ AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
endef
-$(eval $(call KernelPackage,pcmcia-yenta))
+define KernelPackage/gpio-nsc/description
+ Kernel module for Natsemi GPIO
+endef
-define KernelPackage/pcmcia-au1000
+$(eval $(call KernelPackage,gpio-nsc))
+
+
+define KernelPackage/gpio-pc8736x
SUBMENU:=$(OTHER_MENU)
- TITLE:=RMI/AMD Au1000 PCMCIA support
- DEPENDS:=kmod-pcmcia-core @TARGET_au1000
- FILES:=$(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,au1x00_ss)
+ TITLE:=PC8736x GPIO support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_PC8736x_GPIO
+ FILES:=$(LINUX_DIR)/drivers/char/pc8736x_gpio.ko
+ AUTOLOAD:=$(call AutoLoad,40,pc8736x_gpio)
endef
-$(eval $(call KernelPackage,pcmcia-au1000))
+define KernelPackage/gpio-pc8736x/description
+ Kernel module for PC8736x GPIO
+endef
+
+$(eval $(call KernelPackage,gpio-pc8736x))
+
-define KernelPackage/pcmcia-bcm63xx
+define KernelPackage/gpio-scx200
SUBMENU:=$(OTHER_MENU)
- TITLE:=Broadcom BCM63xx PCMCIA support
- DEPENDS:=kmod-pcmcia-core @TARGET_brcm63xx
- KCONFIG:=CONFIG_PCMCIA_BCM63XX
- FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
+ TITLE:=Natsemi SCX200 GPIO support
+ DEPENDS:=@TARGET_x86 +kmod-gpio-nsc
+ KCONFIG:=CONFIG_SCx200_GPIO
+ FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.ko
+ AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
endef
-define KernelPackage/pcmcia-bcm63xx/description
- Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
+define KernelPackage/gpio-scx200/description
+ Kernel module for SCX200 GPIO
endef
-$(eval $(call KernelPackage,pcmcia-bcm63xx))
+$(eval $(call KernelPackage,gpio-scx200))
-define KernelPackage/pcmcia-serial
+define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
- TITLE:=Serial devices support
- DEPENDS:=kmod-pcmcia-core
- KCONFIG:= \
- CONFIG_PCMCIA_SERIAL_CS \
- CONFIG_SERIAL_8250_CS
- AUTOLOAD:=$(call AutoLoad,45,serial_cs)
+ TITLE:=NXP 74HC164 GPIO expander support
+ DEPENDS:=@TARGET_brcm63xx
+ KCONFIG:=CONFIG_GPIO_NXP_74HC164
+ FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
+ AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
endef
-define KernelPackage/pcmcia-serial/2.4
-# KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
- FILES:=$(LINUX_DIR)/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/gpio-nxp-74hc164/description
+ Kernel module for NXP 74HC164 GPIO expander
endef
-define KernelPackage/pcmcia-serial/2.6
-# KCONFIG:=CONFIG_SERIAL_8250_CS
- FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
+$(eval $(call KernelPackage,gpio-nxp-74hc164))
+
+define KernelPackage/hid
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=HID Devices
+ DEPENDS:=+kmod-input-evdev
+ KCONFIG:=CONFIG_HID
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
+ AUTOLOAD:=$(call AutoLoad,61,hid)
+ $(call SetDepends/hid)
+ $(call AddDepends/input)
endef
-define KernelPackage/pcmcia-serial/description
- Kernel support for PCMCIA/CardBus serial devices
+define KernelPackage/hid/description
+ Kernel modules for HID devices
endef
-$(eval $(call KernelPackage,pcmcia-serial))
+$(eval $(call KernelPackage,hid))
-define KernelPackage/ssb
+
+define KernelPackage/input-core
SUBMENU:=$(OTHER_MENU)
- TITLE:=Silicon Sonics Backplane glue code
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
- KCONFIG:=\
- CONFIG_SSB \
- CONFIG_SSB_B43_PCI_BRIDGE=y \
- CONFIG_SSB_DRIVER_PCICORE=y \
- CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
- CONFIG_SSB_PCIHOST=y \
- CONFIG_SSB_PCIHOST_POSSIBLE=y \
- CONFIG_SSB_POSSIBLE=y \
- CONFIG_SSB_SPROM=y \
- CONFIG_SSB_SILENT=y
- FILES:=$(LINUX_DIR)/drivers/ssb/ssb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,29,ssb)
+ TITLE:=Input device core
+ KCONFIG:=CONFIG_INPUT
+ $(call SetDepends/input)
+ FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
+ AUTOLOAD:=$(call AutoLoad,19,input-core)
endef
-define KernelPackage/ssb/description
- Silicon Sonics Backplane glue code.
+define KernelPackage/input-core/description
+ Kernel modules for support of input device
endef
-$(eval $(call KernelPackage,ssb))
+$(eval $(call KernelPackage,input-core))
-define KernelPackage/bluetooth
+define KernelPackage/input-evdev
SUBMENU:=$(OTHER_MENU)
- TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT
- KCONFIG:= \
- CONFIG_BLUEZ \
- CONFIG_BLUEZ_L2CAP \
- CONFIG_BLUEZ_SCO \
- CONFIG_BLUEZ_RFCOMM \
- CONFIG_BLUEZ_BNEP \
- CONFIG_BLUEZ_HCIUART \
- CONFIG_BLUEZ_HCIUSB \
- CONFIG_BT \
- CONFIG_BT_L2CAP \
- CONFIG_BT_SCO \
- CONFIG_BT_RFCOMM \
- CONFIG_BT_BNEP \
- CONFIG_BT_HCIUSB \
- CONFIG_BT_HCIUART
-endef
-
-define KernelPackage/bluetooth/2.4
-# KCONFIG:= \
-# CONFIG_BLUEZ \
-# CONFIG_BLUEZ_L2CAP \
-# CONFIG_BLUEZ_SCO \
-# CONFIG_BLUEZ_RFCOMM \
-# CONFIG_BLUEZ_BNEP \
-# CONFIG_BLUEZ_HCIUART \
-# CONFIG_BLUEZ_HCIUSB
- FILES:= \
- $(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluez l2cap sco rfcomm bnep hci_uart hci_usb)
-endef
-
-define KernelPackage/bluetooth/2.6
-# KCONFIG:= \
-# CONFIG_BT \
-# CONFIG_BT_L2CAP \
-# CONFIG_BT_SCO \
-# CONFIG_BT_RFCOMM \
-# CONFIG_BT_BNEP \
-# CONFIG_BT_HCIUSB \
-# CONFIG_BT_HCIUART
- FILES:= \
- $(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hci_uart hci_usb)
+ TITLE:=Input event device
+ KCONFIG:=CONFIG_INPUT_EVDEV
+ FILES:=$(LINUX_DIR)/drivers/input/evdev.ko
+ AUTOLOAD:=$(call AutoLoad,60,evdev)
+ $(call AddDepends/input)
endef
-define KernelPackage/bluetooth/description
- Kernel support for Bluetooth devices
+define KernelPackage/input-evdev/description
+ Kernel modules for support of input device events
endef
-$(eval $(call KernelPackage,bluetooth))
+$(eval $(call KernelPackage,input-evdev))
-define KernelPackage/mmc
+define KernelPackage/input-gpio-buttons
SUBMENU:=$(OTHER_MENU)
- TITLE:=MMC/SD Card Support
- DEPENDS:=@LINUX_2_6
+ TITLE:=Polled GPIO buttons input device
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
KCONFIG:= \
- CONFIG_MMC \
- CONFIG_MMC_BLOCK \
- CONFIG_MMC_DEBUG=n \
- CONFIG_MMC_UNSAFE_RESUME=n \
- CONFIG_MMC_BLOCK_BOUNCE=y \
- CONFIG_MMC_SDHCI=n \
- CONFIG_MMC_TIFM_SD=n \
- CONFIG_MMC_WBSD=n \
- CONFIG_SDIO_UART=n
- FILES:= \
- $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
+ CONFIG_INPUT_GPIO_BUTTONS \
+ CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.ko
+ AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
endef
-define KernelPackage/mmc/description
- Kernel support for MMC/SD cards
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
endef
-$(eval $(call KernelPackage,mmc))
+$(eval $(call KernelPackage,input-gpio-buttons))
-define KernelPackage/mmc-at91
+define KernelPackage/input-gpio-keys
SUBMENU:=$(OTHER_MENU)
- TITLE:=MMC/SD Card Support on AT91
- DEPENDS:=@TARGET_at91 +kmod-mmc
- KCONFIG:=CONFIG_MMC_AT91
- FILES:=$(LINUX_DIR)/drivers/mmc/host/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+ TITLE:=GPIO key support
+ DEPENDS:= @GPIO_SUPPORT
+ KCONFIG:=CONFIG_KEYBOARD_GPIO
+ FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
+ AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
+ $(call AddDepends/input)
endef
-define KernelPackage/mmc-at91/description
- Kernel support for MMC/SD cards on the AT91 target
+define KernelPackage/input-gpio-keys/description
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
endef
-$(eval $(call KernelPackage,mmc-at91))
+$(eval $(call KernelPackage,input-gpio-keys))
-# XXX: added a workaround for watchdog path changes
-ifeq ($(KERNEL),2.4)
- WATCHDOG_DIR=char
-endif
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.24)),1)
- WATCHDOG_DIR=watchdog
-endif
-WATCHDOG_DIR?=char/watchdog
+define KernelPackage/input-gpio-encoder
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO rotay encoder
+ KCONFIG:=CONFIG_INPUT_GPIO_ROTARY_ENCODER
+ FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.ko
+ AUTOLOAD:=$(call AutoLoad,62,rotary_encoder)
+ $(call AddDepends/input,@GPIO_SUPPORT)
+endef
+
+define KernelPackage/gpio-encoder/description
+ Kernel module to use rotary encoders connected to GPIO pins
+endef
+
+$(eval $(call KernelPackage,input-gpio-encoder))
-define KernelPackage/atmel-wdt
+
+define KernelPackage/input-joydev
SUBMENU:=$(OTHER_MENU)
- TITLE:=AT32AP700x watchdog
- DEPENDS:=@TARGET_avr32
- KCONFIG:=CONFIG_AT32AP700X_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+ TITLE:=Joystick device support
+ KCONFIG:=CONFIG_INPUT_JOYDEV
+ FILES:=$(LINUX_DIR)/drivers/input/joydev.ko
+ AUTOLOAD:=$(call AutoLoad,62,joydev)
+ $(call AddDepends/input)
endef
-define KernelPackage/atmel-wdt/description
- AT32AP700x watchdog
+define KernelPackage/input-joydev/description
+ Kernel module for joystick support
endef
-$(eval $(call KernelPackage,atmel-wdt))
+$(eval $(call KernelPackage,input-joydev))
-define KernelPackage/softdog
+define KernelPackage/input-polldev
SUBMENU:=$(OTHER_MENU)
- TITLE:=Software watchdog driver
- KCONFIG:=CONFIG_SOFT_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,softdog)
+ TITLE:=Polled Input device support
+ KCONFIG:=CONFIG_INPUT_POLLDEV
+ FILES:=$(LINUX_DIR)/drivers/input/input-polldev.ko
+ AUTOLOAD:=$(call AutoLoad,20,input-polldev)
+ $(call AddDepends/input)
endef
-define KernelPackage/softdog/description
- Software watchdog driver
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
endef
-$(eval $(call KernelPackage,softdog))
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/leds-alix
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines ALIX LED support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_LEDS_ALIX2
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-alix2.ko
+ AUTOLOAD:=$(call AutoLoad,50,leds-alix2)
+endef
+
+define KernelPackage/leds-alix/description
+ Kernel module for PCengines ALIX LEDs
+endef
+
+$(eval $(call KernelPackage,leds-alix))
define KernelPackage/leds-gpio
TITLE:=GPIO LED support
DEPENDS:= @GPIO_SUPPORT
KCONFIG:=CONFIG_LEDS_GPIO
- FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.ko
AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
endef
$(eval $(call KernelPackage,leds-gpio))
-define KernelPackage/ledtrig-adm5120-switch
- SUBMENU:=$(OTHER_MENU)
- TITLE:=LED ADM5120 Switch Port Status Trigger
- DEPENDS:=@TARGET_adm5120
- KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
-endef
-
-define KernelPackage/ledtrig-adm5120-switch/description
- Kernel module to allow LEDs to be controlled by the port states
- of the ADM5120 built-in ethernet switch.
-endef
-
-$(eval $(call KernelPackage,ledtrig-adm5120-switch))
-
-
define KernelPackage/leds-net48xx
SUBMENU:=$(OTHER_MENU)
TITLE:=Soekris Net48xx LED support
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 +kmod-gpio-scx200
KCONFIG:=CONFIG_LEDS_NET48XX
- FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.ko
AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
endef
$(eval $(call KernelPackage,leds-net48xx))
-define KernelPackage/leds-wrap
+define KernelPackage/leds-rb750
SUBMENU:=$(OTHER_MENU)
- TITLE:=PCengines WRAP LED support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_LEDS_WRAP
- FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
+ TITLE:=RouterBOARD 750 LED support
+ DEPENDS:=@TARGET_ar71xx
+ KCONFIG:=CONFIG_LEDS_RB750
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-rb750.ko
+ AUTOLOAD:=$(call AutoLoad,60,leds-rb750)
endef
-define KernelPackage/leds-wrap/description
- Kernel module for PCengines WRAP LEDs
+define KernelPackage/leds-rb750/description
+ Kernel module for the LEDs on the MikroTik RouterBOARD 750.
endef
-$(eval $(call KernelPackage,leds-wrap))
+$(eval $(call KernelPackage,leds-rb750))
-define KernelPackage/leds-alix
+define KernelPackage/leds-wndr3700-usb
SUBMENU:=$(OTHER_MENU)
- TITLE:=PCengines ALIX LED support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_LEDS_ALIX
- FILES:=$(LINUX_DIR)/drivers/leds/leds-alix.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,leds-alix)
+ TITLE:=WNDR3700 USB LED support
+ DEPENDS:=@TARGET_ar71xx
+ KCONFIG:=CONFIG_LEDS_WNDR3700_USB
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-wndr3700-usb.ko
+ AUTOLOAD:=$(call AutoLoad,60,leds-wndr3700-usb)
endef
-define KernelPackage/leds-alix/description
- Kernel module for PCengines ALIX LEDs
+define KernelPackage/leds-wndr3700-usb/description
+ Kernel module for the USB LED on the NETGWR WNDR3700 board.
endef
-$(eval $(call KernelPackage,leds-alix))
+$(eval $(call KernelPackage,leds-wndr3700-usb))
-define KernelPackage/ledtrig-netdev
+define KernelPackage/leds-wrap
SUBMENU:=$(OTHER_MENU)
- TITLE:=LED NETDEV Trigger
- KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+ TITLE:=PCengines WRAP LED support
+ DEPENDS:=@TARGET_x86 +kmod-gpio-scx200
+ KCONFIG:=CONFIG_LEDS_WRAP
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.ko
+ AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
endef
-define KernelPackage/ledtrig-netdev/description
- Kernel module to drive LEDs based on network activity.
+define KernelPackage/leds-wrap/description
+ Kernel module for PCengines WRAP LEDs
endef
-$(eval $(call KernelPackage,ledtrig-netdev))
+$(eval $(call KernelPackage,leds-wrap))
define KernelPackage/ledtrig-morse
SUBMENU:=$(OTHER_MENU)
TITLE:=LED Morse Trigger
KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.ko
AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
endef
$(eval $(call KernelPackage,ledtrig-morse))
-define KernelPackage/gpio-dev
+define KernelPackage/ledtrig-netdev
SUBMENU:=$(OTHER_MENU)
- TITLE:=Generic GPIO char device support
- DEPENDS:=@GPIO_SUPPORT
- KCONFIG:=CONFIG_GPIO_DEVICE
- FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+ TITLE:=LED NETDEV Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.ko
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
endef
-define KernelPackage/gpio-dev/description
- Kernel module to allows control of GPIO pins using a character device.
+define KernelPackage/ledtrig-netdev/description
+ Kernel module to drive LEDs based on network activity.
endef
-$(eval $(call KernelPackage,gpio-dev))
+$(eval $(call KernelPackage,ledtrig-netdev))
-define KernelPackage/nsc-gpio
+define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi GPIO support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_NSC_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
-endef
-
-define KernelPackage/nsc-gpio/description
- Kernel module for Natsemi GPIO
+ TITLE:=Parallel port and line printer support
+ DEPENDS:=@BROKEN
+ KCONFIG:= \
+ CONFIG_PARPORT \
+ CONFIG_PRINTER \
+ CONFIG_PPDEV
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport.ko \
+ $(LINUX_DIR)/drivers/char/lp.ko \
+ $(LINUX_DIR)/drivers/char/ppdev.ko
+ AUTOLOAD:=$(call AutoLoad,50,parport lp)
endef
-$(eval $(call KernelPackage,nsc-gpio))
+$(eval $(call KernelPackage,lp))
-define KernelPackage/scx200-gpio
+define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi SCX200 GPIO support
- DEPENDS:=@TARGET_x86 kmod-nsc-gpio
- KCONFIG:=CONFIG_SCx200_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
+ TITLE:=MMC/SD Card Support
+ KCONFIG:= \
+ CONFIG_MMC \
+ CONFIG_MMC_BLOCK \
+ CONFIG_MMC_DEBUG=n \
+ CONFIG_MMC_UNSAFE_RESUME=n \
+ CONFIG_MMC_BLOCK_BOUNCE=y \
+ CONFIG_MMC_SDHCI=n \
+ CONFIG_MMC_TIFM_SD=n \
+ CONFIG_MMC_WBSD=n \
+ CONFIG_SDIO_UART=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
+ AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
endef
-define KernelPackage/scx200-gpio/description
- Kernel module for SCX200 GPIO
+define KernelPackage/mmc/description
+ Kernel support for MMC/SD cards
endef
-$(eval $(call KernelPackage,scx200-gpio))
+$(eval $(call KernelPackage,mmc))
-define KernelPackage/scx200-wdt
+define KernelPackage/mmc-atmelmci
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi SCX200 Watchdog support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_SC1200_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
+ TITLE:=Amtel MMC Support
+ DEPENDS:=@TARGET_avr32 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_ATMELMCI
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.ko
+ AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
endef
-define KernelPackage/scx200-wdt/description
- Kernel module for SCX200 Watchdog
+define KernelPackage/mmc-atmelmci/description
+ Kernel support for Atmel Multimedia Card Interface.
endef
-$(eval $(call KernelPackage,scx200-wdt))
+$(eval $(call KernelPackage,mmc-atmelmci,1))
-define KernelPackage/sc520-wdt
+define KernelPackage/rfkill
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi SC520 Watchdog support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_SC520_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
+ TITLE:=RF switch subsystem support
+ KCONFIG:= \
+ CONFIG_RFKILL \
+ CONFIG_RFKILL_INPUT=y \
+ CONFIG_RFKILL_LEDS=y
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.31)),1)
+ FILES:= \
+ $(LINUX_DIR)/net/rfkill/rfkill.ko
+ AUTOLOAD:=$(call AutoLoad,20,rfkill)
+else
+ FILES:= \
+ $(LINUX_DIR)/net/rfkill/rfkill.ko \
+ $(LINUX_DIR)/net/rfkill/rfkill-input.ko
+ AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
+endif
+ $(call SetDepends/rfkill)
endef
-define KernelPackage/sc520-wdt/description
- Kernel module for SC520 Watchdog
+define KernelPackage/rfkill/description
+ Say Y here if you want to have control over RF switches
+ found on many WiFi and Bluetooth cards.
endef
-$(eval $(call KernelPackage,sc520-wdt))
+$(eval $(call KernelPackage,rfkill))
-define KernelPackage/input-core
+define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
- TITLE:=Input device core
- DEPENDS:=@LINUX_2_6
- KCONFIG:=CONFIG_INPUT
- FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,input-core)
+ TITLE:=Software watchdog driver
+ KCONFIG:=CONFIG_SOFT_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
+ AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
-define KernelPackage/input-core/description
- Kernel modules for support of input device
+define KernelPackage/softdog/description
+ Software watchdog driver
endef
-$(eval $(call KernelPackage,input-core))
+$(eval $(call KernelPackage,softdog))
-define KernelPackage/input-evdev
+define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
- TITLE:=Input even device
- DEPENDS:=+kmod-input-core
- KCONFIG:=CONFIG_INPUT_EVDEV
- FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,evdev)
+ TITLE:=Silicon Sonics Backplane glue code
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+ KCONFIG:=\
+ CONFIG_SSB \
+ CONFIG_SSB_B43_PCI_BRIDGE=y \
+ CONFIG_SSB_DRIVER_MIPS=n \
+ CONFIG_SSB_DRIVER_PCICORE=y \
+ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+ CONFIG_SSB_PCIHOST=y \
+ CONFIG_SSB_PCIHOST_POSSIBLE=y \
+ CONFIG_SSB_POSSIBLE=y \
+ CONFIG_SSB_SPROM=y \
+ CONFIG_SSB_SILENT=y
+ FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
+ AUTOLOAD:=$(call AutoLoad,29,ssb)
endef
-define KernelPackage/input-evdev/description
- Kernel modules for support of input device events
+define KernelPackage/ssb/description
+ Silicon Sonics Backplane glue code.
endef
-$(eval $(call KernelPackage,input-evdev))
+$(eval $(call KernelPackage,ssb))
-define KernelPackage/hid
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Input even device
- DEPENDS:=+kmod-input-core +kmod-input-evdev
- KCONFIG:=CONFIG_HID
- FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,61,hid)
-endef
-
-define KernelPackage/hid/description
- Kernel modules for HID devices
+define KernelPackage/textsearch
+SUBMENU:=$(OTHER_MENU)
+ TITLE:=Textsearch support is selected if needed
+ KCONFIG:= \
+ CONFIG_TEXTSEARCH=y \
+ CONFIG_TEXTSEARCH_KMP \
+ CONFIG_TEXTSEARCH_BM \
+ CONFIG_TEXTSEARCH_FSM
+ FILES:= \
+ $(LINUX_DIR)/lib/ts_kmp.ko \
+ $(LINUX_DIR)/lib/ts_bm.ko \
+ $(LINUX_DIR)/lib/ts_fsm.ko
+ AUTOLOAD:=$(call AutoLoad,20,ts_kmp ts_bm ts_fsm)
endef
-$(eval $(call KernelPackage,hid))
+$(eval $(call KernelPackage,textsearch))
-define KernelPackage/input-polldev
+define KernelPackage/wdt-geode
SUBMENU:=$(OTHER_MENU)
- TITLE:=Polled Input device support
- DEPENDS:=+kmod-input-core @LINUX_2_6
- KCONFIG:=CONFIG_INPUT_POLLDEV
- FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,61,input-polldev)
+ TITLE:=Geode/LX Watchdog timer
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_GEODE_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/geodewdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,geodewdt)
endef
-define KernelPackage/input-polldev/description
- Kernel module for support of polled input devices
+define KernelPackage/wdt-geode/description
+ Kernel module for Geode watchdog timer.
endef
-$(eval $(call KernelPackage,input-polldev))
+$(eval $(call KernelPackage,wdt-geode))
-define KernelPackage/input-gpio-buttons
+define KernelPackage/wdt-sc520
SUBMENU:=$(OTHER_MENU)
- TITLE:=Polled GPIO buttons input device
- DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
- KCONFIG:= \
- CONFIG_INPUT_GPIO_BUTTONS \
- CONFIG_INPUT_MISC=y
- FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
+ TITLE:=Natsemi SC520 Watchdog support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_SC520_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
endef
-define KernelPackage/input-gpio-buttons/description
- Kernel module for support polled GPIO buttons input device
+define KernelPackage/wdt-sc520/description
+ Kernel module for SC520 Watchdog
endef
-$(eval $(call KernelPackage,input-gpio-buttons))
+$(eval $(call KernelPackage,wdt-sc520))
-define KernelPackage/mmc-spi
+define KernelPackage/wdt-scx200
SUBMENU:=$(OTHER_MENU)
- TITLE:=MMC/SD over SPI Support
- DEPENDS:=@LINUX_2_6 +kmod-mmc +kmod-crc-itu-t +kmod-crc7
- KCONFIG:=CONFIG_MMC_SPI \
- CONFIG_SPI=y \
- CONFIG_SPI_MASTER=y
- FILES:=$(LINUX_DIR)/drivers/mmc/host/mmc_spi.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_spi)
-endef
-
-define KernelPackage/mmc-spi/description
- Kernel support for MMC/SD over SPI
+ TITLE:=Natsemi SCX200 Watchdog support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_SCx200_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
-$(eval $(call KernelPackage,mmc-spi))
-
-define KernelPackage/mmc-atmelmci
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Amtel MMC Support
- DEPENDS:=@TARGET_avr32 +kmod-mmc
- KCONFIG:=CONFIG_MMC_ATMELMCI
- FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
+define KernelPackage/wdt-scx200/description
+ Kernel module for SCX200 Watchdog
endef
-define KernelPackage/mmc-atmelmci/description
- Kernel support for Atmel Multimedia Card Interface.
-endef
+$(eval $(call KernelPackage,wdt-scx200))
-$(eval $(call KernelPackage,mmc-atmelmci))
-define KernelPackage/spi-bitbang
+define KernelPackage/pwm
SUBMENU:=$(OTHER_MENU)
- TITLE:=Serial Peripheral Interface bitbanging library
- DEPENDS:=@LINUX_2_6
- KCONFIG:=CONFIG_SPI_BITBANG \
- CONFIG_SPI=y \
- CONFIG_SPI_MASTER=y
- FILES:=$(LINUX_DIR)/drivers/spi/spi_bitbang.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,91,spi_bitbang)
-endef
-
-define KernelPackage/spi-bitbang/description
- This package contains the SPI bitbanging library
+ TITLE:=PWM generic API
+ KCONFIG:=CONFIG_GENERIC_PWM
+ FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
+ AUTOLOAD:=$(call AutoLoad,50,pwm)
endef
-$(eval $(call KernelPackage,spi-bitbang))
-
-define KernelPackage/spi-gpio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=GPIO based bitbanging SPI controller
- DEPENDS:=@GPIO_SUPPORT +kmod-spi-bitbang
- KCONFIG:=CONFIG_SPI_GPIO
- FILES:=$(LINUX_DIR)/drivers/spi/spi_gpio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,92,spi_gpio)
+define KernelPackage/pwm/description
+ Kernel module that implement a generic PWM API
endef
-define KernelPackage/spi-gpio/description
- This package contains the GPIO based bitbanging SPI controller driver
-endef
+$(eval $(call KernelPackage,pwm))
-$(eval $(call KernelPackage,spi-gpio))
-define KernelPackage/spi-dev
+define KernelPackage/pwm-gpio
SUBMENU:=$(OTHER_MENU)
- TITLE:=User mode SPI device driver
- DEPENDS:=@LINUX_2_6
- KCONFIG:=CONFIG_SPI_SPIDEV \
- CONFIG_SPI=y \
- CONFIG_SPI_MASTER=y
- FILES:=$(LINUX_DIR)/drivers/spi/spidev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,91,spidev)
+ TITLE:=PWM over GPIO
+ DEPENDS:=+kmod-pwm
+ KCONFIG:=CONFIG_GPIO_PWM
+ FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
+ AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
endef
-define KernelPackage/spi-dev/description
- This package contains the user mode SPI device driver
+define KernelPackage/pwm-gpio/description
+ Kernel module to models a single-channel PWM device using a timer and a GPIO pin
endef
-$(eval $(call KernelPackage,spi-dev))
+$(eval $(call KernelPackage,pwm-gpio))
projects / openwrt.git / blobdiff