add IXP4xx GPIOLIB support based on Chris' patch

[openwrt.git] / target / linux / atheros / image / Makefile

diff --git a/target/linux/atheros/image/Makefile b/target/linux/atheros/image/Makefile
index b8ca313..45b72c7 100644 (file)
--- a/target/linux/atheros/image/Makefile
+++ b/target/linux/atheros/image/Makefile
@@ -1,5 +1,5 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
+#
+# Copyright (C) 2006-2008 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -7,34 +7,12 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-LOADADDR = 0x81000000           # RAM start + 16M
-KERNEL_ENTRY = 0x80041000
-RAMSIZE = 0x00100000            # 1MB
-IMAGE_COPY = 1
-
-LOADER_MAKEOPTS= \
-               KDIR=$(KDIR) \
-               LOADADDR=$(LOADADDR) \
-               KERNEL_ENTRY=$(KERNEL_ENTRY) \
-               RAMSIZE=$(RAMSIZE) \
-               IMAGE_COPY=$(IMAGE_COPY)
-
-define Build/Clean
-       $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
-endef
-        
-define Image/Prepare
+define Image/BuildKernel
        cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.elf
        gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
        $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
        dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(BOARD)-vmlinux.lzma bs=65536 conv=sync
        dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(BOARD)-vmlinux.gz bs=65536 conv=sync
-       cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
-       $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
-endef
-
-define Image/BuildKernel
-       $(CP) $(KDIR)/loader.bin $(BIN_DIR)/openwrt-$(BOARD)-vmlinux
 endef
 
 define Image/Build/squashfs
@@ -44,16 +22,29 @@ endef
 define Image/Build
        $(call Image/Build/$(1))
        dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
-endef
 
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-  define Image/Prepare
-       cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
-       $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
-  endef
-  define Image/BuildKernel
-       $(CP) $(KDIR)/loader.bin $(BIN_DIR)/openwrt-$(BOARD)-vmlinux
-  endef
-endif
+       -$(STAGING_DIR_HOST)/bin/mkfwimage \
+               -B XS2 -v XS2.ar2316.OpenWrt \
+               -k $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.lzma \
+               -r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
+               -o $(BIN_DIR)/openwrt-$(BOARD)-ubnt2-$(1).bin
+
+       -$(STAGING_DIR_HOST)/bin/mkfwimage \
+               -B XS5 -v XS5.ar2313.OpenWrt \
+               -k $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.lzma \
+               -r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
+               -o $(BIN_DIR)/openwrt-$(BOARD)-ubnt5-$(1).bin
+
+       -$(STAGING_DIR_HOST)/bin/mkmylofw -B np25g \
+               -p0x020000:0x130000:ah:0x80041000:linux:$(KDIR)/vmlinux.bin.gz  \
+               -p0x150000:0x2a0000:::rootfs:$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
+               $(BIN_DIR)/openwrt-$(BOARD)-np25g-$(1).bin
+
+       -$(STAGING_DIR_HOST)/bin/mkmylofw -B wpe53g \
+               -p0x020000:0x130000:ah:0x80041000:linux:$(KDIR)/vmlinux.bin.gz  \
+               -p0x150000:0x2a0000:::rootfs:$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
+               $(BIN_DIR)/openwrt-$(BOARD)-wpe53g-$(1).bin
+
+endef
 
 $(eval $(call BuildImage))