x86: add additional companion chip drivers to alix2 and geos
[openwrt.git] / package / broadcom-diag / src / diag.c
index 94ab384..00a72e9 100644 (file)
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
  * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
  *
  * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
  * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2008 Andy Boyett <agb@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -18,7 +19,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  *
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  *
- * $Id$
  */
 #include <linux/module.h>
 #include <linux/pci.h>
  */
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/timer.h>
 #include <linux/version.h>
 #include <asm/uaccess.h>
 #include <linux/timer.h>
 #include <linux/version.h>
 #include <asm/uaccess.h>
-
-#ifndef LINUX_2_4
 #include <linux/workqueue.h>
 #include <linux/skbuff.h>
 #include <linux/netlink.h>
 #include <linux/workqueue.h>
 #include <linux/skbuff.h>
 #include <linux/netlink.h>
+#include <linux/kobject.h>
 #include <net/sock.h>
 #include <net/sock.h>
-extern struct sock *uevent_sock;
 extern u64 uevent_next_seqnum(void);
 extern u64 uevent_next_seqnum(void);
-#else
-#include <linux/tqueue.h>
-#define INIT_WORK INIT_TQUEUE
-#define schedule_work schedule_task
-#define work_struct tq_struct
-#endif
 
 #include "gpio.h"
 #include "diag.h"
 #define getvar(str) (nvram_get(str)?:"")
 
 
 #include "gpio.h"
 #include "diag.h"
 #define getvar(str) (nvram_get(str)?:"")
 
+static inline int startswith (char *source, char *cmp) { return !strncmp(source,cmp,strlen(cmp)); }
 static int fill_event(struct event_t *);
 static unsigned int gpiomask = 0;
 module_param(gpiomask, int, 0644);
 static int fill_event(struct event_t *);
 static unsigned int gpiomask = 0;
 module_param(gpiomask, int, 0644);
@@ -53,23 +46,35 @@ module_param(gpiomask, int, 0644);
 enum {
        /* Linksys */
        WAP54GV1,
 enum {
        /* Linksys */
        WAP54GV1,
+       WAP54GV2,
        WAP54GV3,
        WRT54GV1,
        WRT54G,
        WRTSL54GS,
        WRT54G3G,
        WAP54GV3,
        WRT54GV1,
        WRT54G,
        WRTSL54GS,
        WRT54G3G,
+       WRT54G3GV2_VF,
+       WRT160N,
+       WRT300NV11,
        WRT350N,
        WRT350N,
-       
+       WRT600N,
+       WRT600NV11,
+       WRT610N,
+
        /* ASUS */
        WLHDD,
        WL300G,
        /* ASUS */
        WLHDD,
        WL300G,
+       WL320GE,
+       WL330GE,
        WL500G,
        WL500GD,
        WL500GP,
        WL500G,
        WL500GD,
        WL500GP,
+       WL500GPV2,
        WL500W,
        WL500W,
+       WL520GC,
+       WL520GU,
        ASUS_4702,
        WL700GE,
        ASUS_4702,
        WL700GE,
-       
+
        /* Buffalo */
        WBR2_G54,
        WHR_G54S,
        /* Buffalo */
        WBR2_G54,
        WHR_G54S,
@@ -86,12 +91,13 @@ enum {
        /* Siemens */
        SE505V1,
        SE505V2,
        /* Siemens */
        SE505V1,
        SE505V2,
-       
+
        /* US Robotics */
        USR5461,
 
        /* Dell */
        TM2300,
        /* US Robotics */
        USR5461,
 
        /* Dell */
        TM2300,
+       TM2300V2,
 
        /* Motorola */
        WE800G,
 
        /* Motorola */
        WE800G,
@@ -104,17 +110,38 @@ enum {
 
        /* Netgear */
        WGT634U,
 
        /* Netgear */
        WGT634U,
+       WNR834BV1,
+       WNR834BV2,
 
        /* Trendware */
        TEW411BRPP,
 
        /* Trendware */
        TEW411BRPP,
-       
+
        /* SimpleTech */
        STI_NAS,
 
        /* D-Link */
        DIR130,
        /* SimpleTech */
        STI_NAS,
 
        /* D-Link */
        DIR130,
+       DIR320,
        DIR330,
        DWL3150,
        DIR330,
        DWL3150,
+
+       /* Sitecom */
+       WL105B,
+
+       /* Western Digital */
+       WDNetCenter,
+
+       /* Askey */
+       RT210W,
+
+       /* OvisLink */
+       WL1600GL,
+
+       /* Microsoft */
+       MN700,
+
+       /* Edimax */
+       PS1208MFG,
 };
 
 static void __init bcm4780_init(void) {
 };
 
 static void __init bcm4780_init(void) {
@@ -131,6 +158,30 @@ static void __init bcm4780_init(void) {
                schedule_timeout(HZ * 5);
 }
 
                schedule_timeout(HZ * 5);
 }
 
+static void __init NetCenter_init(void) {
+               /* unset pin 6 (+12V) */
+               int pin = 1 << 6;
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);
+               /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
+               pin = 1 << 1;
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);
+               /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
+               bcm4780_init();
+}
+
+static void __init bcm57xx_init(void) {
+       int pin = 1 << 2;
+
+       /* FIXME: switch comes up, but port mappings/vlans not right */
+       gpio_outen(pin, pin);
+       gpio_control(pin, 0);
+       gpio_out(pin, pin);
+}
+
 static struct platform_t __initdata platforms[] = {
        /* Linksys */
        [WAP54GV1] = {
 static struct platform_t __initdata platforms[] = {
        /* Linksys */
        [WAP54GV1] = {
@@ -138,11 +189,21 @@ static struct platform_t __initdata platforms[] = {
                .buttons        = {
                        { .name = "reset",      .gpio = 1 << 0 },
                },
                .buttons        = {
                        { .name = "reset",      .gpio = 1 << 0 },
                },
-               .leds           = { 
+               .leds           = {
                        { .name = "diag",       .gpio = 1 << 3 },
                        { .name = "wlan",       .gpio = 1 << 4 },
                },
        },
                        { .name = "diag",       .gpio = 1 << 3 },
                        { .name = "wlan",       .gpio = 1 << 4 },
                },
        },
+       [WAP54GV2] = {
+               .name           = "Linksys WAP54G V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 5, .polarity = REVERSE },
+                       /* GPIO 6 is b44 (eth0, LAN) PHY power */
+               },
+       },
        [WAP54GV3] = {
                .name           = "Linksys WAP54G V3",
                .buttons        = {
        [WAP54GV3] = {
                .name           = "Linksys WAP54G V3",
                .buttons        = {
@@ -150,7 +211,7 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "reset",      .gpio = 1 << 7 },
                        { .name = "ses",        .gpio = 1 << 0 },
                },
                        { .name = "reset",      .gpio = 1 << 7 },
                        { .name = "ses",        .gpio = 1 << 0 },
                },
-               .leds           = { 
+               .leds           = {
                        /* FIXME: diag? */
                        { .name = "ses",        .gpio = 1 << 1 },
                },
                        /* FIXME: diag? */
                        { .name = "ses",        .gpio = 1 << 1 },
                },
@@ -160,7 +221,7 @@ static struct platform_t __initdata platforms[] = {
                .buttons        = {
                        { .name = "reset",      .gpio = 1 << 6 },
                },
                .buttons        = {
                        { .name = "reset",      .gpio = 1 << 6 },
                },
-               .leds           = { 
+               .leds           = {
                        { .name = "diag",       .gpio = 0x13 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
                        { .name = "dmz",        .gpio = 0x12 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
                },
                        { .name = "diag",       .gpio = 0x13 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
                        { .name = "dmz",        .gpio = 0x12 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
                },
@@ -206,6 +267,43 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
                },
        },
                        { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
                },
        },
+       [WRT54G3GV2_VF] = {
+               .name           = "Linksys WRT54G3GV2-VF",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "3g",         .gpio = 1 << 5 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "3g_green",   .gpio = 1 << 2, .polarity = NORMAL },
+                       { .name = "3g_blue",    .gpio = 1 << 3, .polarity = NORMAL },
+               },
+       },
+       [WRT160N] = {
+               .name           = "Linksys WRT160N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "ses_blue",   .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
+       [WRT300NV11] = {
+               .name           = "Linksys WRT300N V1.1",
+               .buttons        = {
+                       { .name = "reset",     .gpio = 1 << 6 }, // "Reset" on back panel
+                       { .name = "ses",       .gpio = 1 << 4 }, // "Reserved" on top panel
+               },
+               .leds           = {
+                       { .name = "power",     .gpio = 1 << 1, .polarity = NORMAL  }, // "Power"
+                       { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
+                       { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green
+               },
+               .platform_init = bcm57xx_init,
+       },
        [WRT350N] = {
                .name           = "Linksys WRT350N",
                .buttons        = {
        [WRT350N] = {
                .name           = "Linksys WRT350N",
                .buttons        = {
@@ -214,7 +312,56 @@ static struct platform_t __initdata platforms[] = {
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
-                       { .name = "ses",        .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "ses_amber",  .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "ses_green",  .gpio = 1 << 9, .polarity = REVERSE },
+                       { .name = "usb_blink",  .gpio = 1 << 10, .polarity = REVERSE },
+                       { .name = "usb",        .gpio = 1 << 11, .polarity = REVERSE },
+               },
+               .platform_init = bcm57xx_init,
+       },
+       [WRT600N] = {
+               .name           = "Linksys WRT600N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "power",              .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
+                       { .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
+                       { .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
+                       { .name = "wl0_ses_green",      .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
+                       { .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
+                       { .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
+               },
+               .platform_init = bcm57xx_init,
+       },
+       [WRT600NV11] = {
+               .name           = "Linksys WRT600N V1.1",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "power",             .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
+                       { .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
+                       { .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
+                       { .name = "wl0_ses_green",     .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
+                       { .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
+                       { .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
+               },
+               .platform_init = bcm57xx_init,
+       },
+       [WRT610N] = {
+               .name           = "Linksys WRT610N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 8 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1,  .polarity = NORMAL }, // Power LED
+                       { .name = "usb",        .gpio = 1 << 0,  .polarity = REVERSE }, // USB LED
+                       { .name = "ses_amber",  .gpio = 1 << 3,  .polarity = REVERSE }, // WiFi protected setup LED amber
+                       { .name = "ses_blue",   .gpio = 1 << 9,  .polarity = REVERSE }, // WiFi protected setup LED blue
                },
        },
        /* Asus */
                },
        },
        /* Asus */
@@ -225,7 +372,7 @@ static struct platform_t __initdata platforms[] = {
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
-                       { .name = "usb",        .gpio = 1 << 2, .polarity = NORMAL },
+                       { .name = "usb",        .gpio = 1 << 2, .polarity = REVERSE },
                },
        },
        [WL300G] = {
                },
        },
        [WL300G] = {
@@ -237,6 +384,26 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
                },
        },
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
                },
        },
+       [WL320GE] = {
+               .name           = "ASUS WL-320gE/WL-320gP",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 2, .polarity = REVERSE },
+                       { .name = "link",       .gpio = 1 << 11, .polarity = REVERSE },
+               },
+       },
+       [WL330GE] = {
+               .name           = "ASUS WL-330gE",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
        [WL500G] = {
                .name           = "ASUS WL-500g",
                .buttons        = {
        [WL500G] = {
                .name           = "ASUS WL-500g",
                .buttons        = {
@@ -265,6 +432,17 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 1, .polarity = REVERSE },
                },
        },
                        { .name = "power",      .gpio = 1 << 1, .polarity = REVERSE },
                },
        },
+       [WL500GPV2] = {
+               .name           = "ASUS WL-500g Premium V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+                       { .name = "ses",        .gpio = 1 << 3 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
        [WL500W] = {
                .name           = "ASUS WL-500W",
                .buttons        = {
        [WL500W] = {
                .name           = "ASUS WL-500W",
                .buttons        = {
@@ -275,6 +453,28 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
                },
        },
                        { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
                },
        },
+       [WL520GC] = {
+               .name           = "ASUS WL-520GC",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+                       { .name = "ses",        .gpio = 1 << 3 },
+               },
+               .leds           = {
+               { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
+       [WL520GU] = {
+               .name           = "ASUS WL-520gU",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+                       { .name = "ses",        .gpio = 1 << 3 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
        [ASUS_4702] = {
                .name           = "ASUS (unknown, BCM4702)",
                .buttons        = {
        [ASUS_4702] = {
                .name           = "ASUS (unknown, BCM4702)",
                .buttons        = {
@@ -438,7 +638,8 @@ static struct platform_t __initdata platforms[] = {
                        /* No usable buttons */
                },
                .leds           = {
                        /* No usable buttons */
                },
                .leds           = {
-                       { .name = "dmz",        .gpio = 1 << 4, .polarity = REVERSE },
+//                     { .name = "power",      .gpio = 1 << 0  .polarity = REVERSE },  // Usable when retrofitting D26 (?)
+                       { .name = "dmz",        .gpio = 1 << 4, .polarity = REVERSE },  // actual name WWW
                        { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
                },
        },
                        { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
                },
        },
@@ -449,7 +650,7 @@ static struct platform_t __initdata platforms[] = {
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
-                       { .name = "dmz",        .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "dmz",        .gpio = 1 << 0, .polarity = REVERSE },  // actual name WWW
                        { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
                },
        },
                        { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
                },
        },
@@ -475,6 +676,16 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
                },
        },
                        { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
                },
        },
+       [TM2300V2] = {
+               .name           = "Dell TrueMobile 2300 v2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 6, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
+               },
+       },
        /* Motorola */
        [WE800G] = {
                .name           = "Motorola WE800G",
        /* Motorola */
        [WE800G] = {
                .name           = "Motorola WE800G",
@@ -548,6 +759,28 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 3, .polarity = NORMAL },
                },
        },
                        { .name = "power",      .gpio = 1 << 3, .polarity = NORMAL },
                },
        },
+       /* Netgear */
+       [WNR834BV1] = {
+               .name           = "Netgear WNR834B V1",
+               .buttons        = { /* TODO: add reset button and confirm LEDs - GPIO from dd-wrt */ },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 4, .polarity = REVERSE },
+                       { .name = "diag",       .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 6, .polarity = REVERSE },
+               },
+       },
+       /* Netgear */
+       [WNR834BV2] = {
+               .name           = "Netgear WNR834B V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 2, .polarity = NORMAL },
+                       { .name = "diag",       .gpio = 1 << 3, .polarity = NORMAL },
+                       { .name = "connected",  .gpio = 1 << 7, .polarity = NORMAL },
+               },
+       },
        /* Trendware */
        [TEW411BRPP] = {
                .name           = "Trendware TEW411BRP+",
        /* Trendware */
        [TEW411BRPP] = {
                .name           = "Trendware TEW411BRP+",
@@ -564,8 +797,7 @@ static struct platform_t __initdata platforms[] = {
        [STI_NAS] = {
                .name      = "SimpleTech SimpleShare NAS",
                .buttons        = {
        [STI_NAS] = {
                .name      = "SimpleTech SimpleShare NAS",
                .buttons        = {
-                       { .name = "reset",      .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
-                       { .name = "power",      .gpio = 1 << 0 }, // on back
+                       { .name = "reset",      .gpio = 1 << 0 }, // Power button on back, named reset to enable failsafe.
                },
                .leds      = {
                        { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
                },
                .leds      = {
                        { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
@@ -580,10 +812,24 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "reserved",   .gpio = 1 << 7},
                },
                .leds      = {
                        { .name = "reserved",   .gpio = 1 << 7},
                },
                .leds      = {
-                       { .name = "diag",       .gpio = 1 << 0},
+                       { .name = "diag",       .gpio = 1 << 0},
                        { .name = "blue",       .gpio = 1 << 6},
                },
        },
                        { .name = "blue",       .gpio = 1 << 6},
                },
        },
+       [DIR320] = {
+               .name     = "D-Link DIR-320",
+               .buttons        = {
+                       { .name = "reserved",   .gpio = 1 << 6},
+                       { .name = "reset",      .gpio = 1 << 7},
+               },
+               .leds      = {
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */
+                       { .name = "red",        .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "blue",       .gpio = 1 << 4, .polarity = REVERSE },
+                       { .name = "usb",        .gpio = 1 << 5, .polarity = NORMAL },
+               },
+       },
        [DIR330] = {
                .name     = "D-Link DIR-330",
                .buttons        = {
        [DIR330] = {
                .name     = "D-Link DIR-330",
                .buttons        = {
@@ -591,8 +837,8 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "reserved",   .gpio = 1 << 7},
                },
                .leds      = {
                        { .name = "reserved",   .gpio = 1 << 7},
                },
                .leds      = {
-                       { .name = "diag",       .gpio = 1 << 0},
-                       { .name = "usb",        .gpio = 1 << 4},
+                       { .name = "diag",       .gpio = 1 << 0},
+                       { .name = "usb",        .gpio = 1 << 4},
                        { .name = "blue",       .gpio = 1 << 6},
                },
        },
                        { .name = "blue",       .gpio = 1 << 6},
                },
        },
@@ -606,6 +852,75 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "status",     .gpio = 1 << 1},
                },
        },
                        { .name = "status",     .gpio = 1 << 1},
                },
        },
+       /* Double check */
+       [WL105B] = {
+               .name   = "Sitecom WL-105b",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 10},
+               },
+               .leds     = {
+                       { .name = "wlan",       .gpio = 1 << 4},
+                       { .name = "power",      .gpio = 1 << 3},
+               },
+       },
+       /* Western Digital Net Center */
+       [WDNetCenter] = {
+               .name   = "Western Digital NetCenter",
+               .buttons        = {
+                       { .name = "power",      .gpio = 1 << 0},
+                       { .name = "reset",      .gpio = 1 << 7},
+               },
+               .platform_init = NetCenter_init,
+       },
+       /* Askey (and clones) */
+       [RT210W] = {
+               .name           = "Askey RT210W",
+               .buttons        = {
+                       /* Power button is hard-wired to hardware reset */
+                       /* but is also connected to GPIO 7 (probably for bootloader recovery)  */
+                       { .name = "power",      .gpio = 1 << 7},
+               },
+               .leds           = {
+                       /* These were verified and named based on Belkin F5D4230-4 v1112 */
+                       { .name = "connected",  .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
+               },
+       },
+       [WL1600GL] = {
+               .name           = "OvisLink WL-1600GL",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 3 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "wps",        .gpio = 1 << 2, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
+                       { .name = "connected",  .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
+       /* Microsoft */
+       [MN700] = {
+               .name   = "Microsoft MN-700",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 7 },
+               },
+               .leds     = {
+                       { .name = "power",      .gpio = 1 << 6, .polarity = NORMAL },
+               },
+       },
+       /* Edimax */
+       [PS1208MFG] = {
+               .name   = "Edimax PS-1208MFG",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 4 },
+               },
+               .leds     = {
+                       { .name = "status",     .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
+               },
+       },
 };
 
 static struct platform_t __init *platform_detect(void)
 };
 
 static struct platform_t __init *platform_detect(void)
@@ -618,26 +933,46 @@ static struct platform_t __init *platform_detect(void)
        /* Look for a model identifier */
 
        /* Based on "model_name" */
        /* Look for a model identifier */
 
        /* Based on "model_name" */
-       if (buf = nvram_get("model_name")) {
+       if ((buf = nvram_get("model_name"))) {
                if (!strcmp(buf, "DIR-130"))
                        return &platforms[DIR130];
                if (!strcmp(buf, "DIR-330"))
                        return &platforms[DIR330];
        }
 
                if (!strcmp(buf, "DIR-130"))
                        return &platforms[DIR130];
                if (!strcmp(buf, "DIR-330"))
                        return &platforms[DIR330];
        }
 
+       /* Based on "wsc_modelname */
+       if ((buf = nvram_get("wsc_modelname"))) {
+               if (!strcmp(buf, "WRT610N"))
+                       return &platforms[WRT610N];
+       }
+
        /* Based on "model_no" */
        /* Based on "model_no" */
-       if (buf = nvram_get("model_no")) {
-               if (!strncmp(buf,"WL700", 5)) /* WL700* */
+       if ((buf = nvram_get("model_no"))) {
+               if (startswith(buf,"WL700")) /* WL700* */
                        return &platforms[WL700GE];
        }
 
                        return &platforms[WL700GE];
        }
 
+       /* Based on "hardware_version" */
+       if ((buf = nvram_get("hardware_version"))) {
+               if (startswith(buf,"WL500GPV2-")) /* WL500GPV2-* */
+                       return &platforms[WL500GPV2];
+               if (startswith(buf,"WL520GC-")) /* WL520GU-* */
+                       return &platforms[WL520GC];
+               if (startswith(buf,"WL520GU-")) /* WL520GU-* */
+                       return &platforms[WL520GU];
+               if (startswith(buf,"WL330GE-")) /* WL330GE-* */
+                       return &platforms[WL330GE];
+       }
+
        /* Based on "ModelId" */
        /* Based on "ModelId" */
-       if (buf = nvram_get("ModelId")) {
+       if ((buf = nvram_get("ModelId"))) {
                if (!strcmp(buf, "WR850GP"))
                        return &platforms[WR850GP];
                if (!strcmp(buf, "WR850GP"))
                        return &platforms[WR850GP];
-               if (!strcmp(buf,"WX-5565"))
-                       return &platforms[TM2300];
-               if (!strncmp(buf,"WE800G", 6)) /* WE800G* */
+               if (!strcmp(buf, "WR850G"))
+                       return &platforms[WR850GV2V3];
+               if (!strcmp(buf, "WX-5565") && !strcmp(getvar("boardtype"),"bcm94710ap"))
+                       return &platforms[TM2300]; /* Dell TrueMobile 2300 */
+               if (startswith(buf,"WE800G")) /* WE800G* */
                        return &platforms[WE800G];
        }
 
                        return &platforms[WE800G];
        }
 
@@ -668,48 +1003,101 @@ static struct platform_t __init *platform_detect(void)
        boardnum = getvar("boardnum");
        boardtype = getvar("boardtype");
 
        boardnum = getvar("boardnum");
        boardtype = getvar("boardtype");
 
-       if (strncmp(getvar("pmon_ver"), "CFE", 3) == 0) {
+       if (!strcmp(boardnum, "20070615")) { /* Linksys WRT600N  v1/V1.1 */
+               if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0") && !strcmp(getvar("switch_type"),"BCM5395"))
+                       return &platforms[WRT600NV11];
+
+       if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0"))
+                       return &platforms[WRT600N];
+       }
+
+       if (startswith(getvar("pmon_ver"), "CFE")) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
+                       if (!strcmp(boardtype, "0x478") && !strcmp(getvar("boot_hw_model"), "WRT300N") && !strcmp(getvar("boot_hw_ver"), "1.1"))
+                               return &platforms[WRT300NV11];
+
                        if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
                                return &platforms[WRT350N];
 
                        if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6"))
                                return &platforms[WRT54G3G];
 
                        if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
                                return &platforms[WRT350N];
 
                        if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6"))
                                return &platforms[WRT54G3G];
 
+                       if (!strcmp(boardtype, "0x042f") && !strcmp(getvar("model_name"), "WRT54G3GV2-VF"))
+                               return &platforms[WRT54G3GV2_VF];
+
                        if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
                                return &platforms[WRTSL54GS];
                        if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
                                return &platforms[WRTSL54GS];
-                       
+
+                       if (!strcmp(boardtype, "0x0472"))
+                               return &platforms[WRT160N];
+
                        /* default to WRT54G */
                        return &platforms[WRT54G];
                }
                        /* default to WRT54G */
                        return &platforms[WRT54G];
                }
-               
+               if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
+                       return &platforms[WAP54GV2];
+
+               if (!strcmp(boardnum, "8") && !strcmp(boardtype, "0x048e"))
+                       return &platforms[WL1600GL];
+
+
+               if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
+                       if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
+                               return &platforms[TM2300V2]; /* Dell TrueMobile 2300 v2 */
+               }
+
                if (!strcmp(boardnum, "45")) { /* ASUS */
                        if (!strcmp(boardtype,"0x042f"))
                                return &platforms[WL500GP];
                        else if (!strcmp(boardtype,"0x0472"))
                                return &platforms[WL500W];
                if (!strcmp(boardnum, "45")) { /* ASUS */
                        if (!strcmp(boardtype,"0x042f"))
                                return &platforms[WL500GP];
                        else if (!strcmp(boardtype,"0x0472"))
                                return &platforms[WL500W];
+                       else if (!strcmp(boardtype,"0x467"))
+                               return &platforms[WL320GE];
                        else
                                return &platforms[WL500GD];
                }
                        else
                                return &platforms[WL500GD];
                }
-               
+
                if (!strcmp(boardnum, "10496"))
                        return &platforms[USR5461];
 
                if (!strcmp(boardnum, "10496"))
                        return &platforms[USR5461];
 
+               if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
+                       return &platforms[SE505V2];
+
+               if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") &&
+                               !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
+                       return &platforms[DIR320];
+
+               if (!strncmp(boardnum, "TH",2) && !strcmp(boardtype,"0x042f")) {
+                       return &platforms[WDNetCenter];
+               }
+
+               if (!strcmp(boardtype,"0x0472") && !strcmp(getvar("cardbus"), "1")) { /* Netgear WNR834B  V1 and V2*/
+                       if (!strcmp(boardnum, "08") || !strcmp(boardnum, "8"))
+                               return &platforms[WNR834BV1];
+                       if (!strcmp(boardnum, "01") || !strcmp(boardnum, "1"))
+                               return &platforms[WNR834BV2];
+               }
+
        } else { /* PMON based - old stuff */
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
                        return &platforms[WR850GV1];
                }
        } else { /* PMON based - old stuff */
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
                        return &platforms[WR850GV1];
                }
-               if (!strncmp(boardtype, "bcm94710dev", 11)) {
+               if (startswith(boardtype, "bcm94710dev")) {
                        if (!strcmp(boardnum, "42"))
                                return &platforms[WRT54GV1];
                        if (simple_strtoul(boardnum, NULL, 0) == 2)
                                return &platforms[WAP54GV1];
                }
                        if (!strcmp(boardnum, "42"))
                                return &platforms[WRT54GV1];
                        if (simple_strtoul(boardnum, NULL, 0) == 2)
                                return &platforms[WAP54GV1];
                }
-               if (!strncmp(getvar("hardware_version"), "WL500-", 6))
-                       return &platforms[WL500G];
-               if (!strncmp(getvar("hardware_version"), "WL300-", 6)) {
+               /* MN-700 has also hardware_version 'WL500-...', so use boardnum */
+               if (startswith(getvar("hardware_version"), "WL500-")) {
+                       if (!strcmp(getvar("boardnum"), "mn700"))
+                               return &platforms[MN700];
+                       else
+                               return &platforms[WL500G];
+               }
+               if (startswith(getvar("hardware_version"), "WL300-")) {
                        /* Either WL-300g or WL-HDD, do more extensive checks */
                        if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
                                (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 1))
                        /* Either WL-300g or WL-HDD, do more extensive checks */
                        if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
                                (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 1))
@@ -718,21 +1106,36 @@ static struct platform_t __init *platform_detect(void)
                                (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 10))
                                return &platforms[WL300G];
                }
                                (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 10))
                                return &platforms[WL300G];
                }
+               /* Sitecom WL-105b */
+               if (startswith(boardnum, "2") && simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 1)
+                       return &platforms[WL105B];
 
                /* unknown asus stuff, probably bcm4702 */
 
                /* unknown asus stuff, probably bcm4702 */
-               if (!strncmp(boardnum, "asusX", 5))
+               if (startswith(boardnum, "asusX"))
                        return &platforms[ASUS_4702];
                        return &platforms[ASUS_4702];
+
+               /* bcm4702 based Askey RT210W clones, Including:
+                * Askey RT210W (duh?)
+                * Siemens SE505v1
+                * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated)
+                */
+               if (!strcmp(boardtype,"bcm94710r4")
+                && !strcmp(boardnum ,"100")
+                && !strcmp(getvar("pmon_ver"),"v1.03.12.bk")
+                  ){
+                       return &platforms[RT210W];
+               }
        }
 
        if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
        }
 
        if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
-               if (!strncmp(boardtype, "bcm94710ap", 10))
+               if (startswith(boardtype, "bcm94710ap"))
                        return &platforms[BUFFALO_UNKNOWN_4710];
                else
                        return &platforms[BUFFALO_UNKNOWN];
        }
 
                        return &platforms[BUFFALO_UNKNOWN_4710];
                else
                        return &platforms[BUFFALO_UNKNOWN];
        }
 
-       if (!strncmp(getvar("CFEver"), "MotoWRv2", 8) ||
-               !strncmp(getvar("CFEver"), "MotoWRv3", 8) ||
+       if (startswith(getvar("CFEver"), "MotoWRv2") ||
+               startswith(getvar("CFEver"), "MotoWRv3") ||
                !strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) {
 
                return &platforms[WR850GV2V3];
                !strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) {
 
                return &platforms[WR850GV2V3];
@@ -742,12 +1145,16 @@ static struct platform_t __init *platform_detect(void)
                return &platforms[TEW411BRPP];
        }
 
                return &platforms[TEW411BRPP];
        }
 
-       if (!strncmp(boardnum, "04FN52", 6)) /* SimpleTech SimpleShare */
+       if (startswith(boardnum, "04FN")) /* SimpleTech SimpleShare */
                return &platforms[STI_NAS];
 
                return &platforms[STI_NAS];
 
-       if (!strcmp(getvar("boardnum"), "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */
+       if (!strcmp(boardnum, "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */
                return &platforms[DWL3150];
 
                return &platforms[DWL3150];
 
+       if (!strcmp(boardnum, "01") && !strcmp(boardtype, "0x048e") && /* Edimax PS1208MFG */
+               !strcmp(getvar("status_gpio"), "1")) /* gpio based detection */
+               return &platforms[PS1208MFG];
+
        /* not found */
        return NULL;
 }
        /* not found */
        return NULL;
 }
@@ -763,20 +1170,19 @@ static void register_buttons(struct button_t *b)
        gpio_control(platform.button_mask, 0);
        platform.button_polarity = gpio_in() & platform.button_mask;
        gpio_intpolarity(platform.button_mask, platform.button_polarity);
        gpio_control(platform.button_mask, 0);
        platform.button_polarity = gpio_in() & platform.button_mask;
        gpio_intpolarity(platform.button_mask, platform.button_polarity);
-       gpio_intmask(platform.button_mask, platform.button_mask);
+       gpio_setintmask(platform.button_mask, platform.button_mask);
 
        gpio_set_irqenable(1, button_handler);
 }
 
 static void unregister_buttons(struct button_t *b)
 {
 
        gpio_set_irqenable(1, button_handler);
 }
 
 static void unregister_buttons(struct button_t *b)
 {
-       gpio_intmask(platform.button_mask, 0);
+       gpio_setintmask(platform.button_mask, 0);
 
        gpio_set_irqenable(0, button_handler);
 }
 
 
 
        gpio_set_irqenable(0, button_handler);
 }
 
 
-#ifndef LINUX_2_4
 static void add_msg(struct event_t *event, char *msg, int argv)
 {
        char *s;
 static void add_msg(struct event_t *event, char *msg, int argv)
 {
        char *s;
@@ -793,9 +1199,6 @@ static void hotplug_button(struct work_struct *work)
        struct event_t *event = container_of(work, struct event_t, wq);
        char *s;
 
        struct event_t *event = container_of(work, struct event_t, wq);
        char *s;
 
-       if (!uevent_sock)
-               return;
-
        event->skb = alloc_skb(2048, GFP_KERNEL);
 
        s = skb_put(event->skb, strlen(event->action) + 2);
        event->skb = alloc_skb(2048, GFP_KERNEL);
 
        s = skb_put(event->skb, strlen(event->action) + 2);
@@ -803,48 +1206,11 @@ static void hotplug_button(struct work_struct *work)
        fill_event(event);
 
        NETLINK_CB(event->skb).dst_group = 1;
        fill_event(event);
 
        NETLINK_CB(event->skb).dst_group = 1;
-       netlink_broadcast(uevent_sock, event->skb, 0, 1, GFP_KERNEL);
+       broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
 
        kfree(event);
 }
 
 
        kfree(event);
 }
 
-#else /* !LINUX_2_4 */
-static inline char *kzalloc(unsigned int size, unsigned int gfp)
-{
-       char *p;
-
-       p = kmalloc(size, gfp);
-       if (p == NULL)
-               return NULL;
-
-       memset(p, 0, size);
-
-       return p;
-}
-
-static void add_msg(struct event_t *event, char *msg, int argv)
-{
-       if (argv)
-               event->argv[event->anr++] = event->scratch;
-       else
-               event->envp[event->enr++] = event->scratch;
-
-       event->scratch += sprintf(event->scratch, "%s", msg) + 1;
-}
-
-static void hotplug_button(struct event_t *event)
-{
-       char *scratch = kzalloc(256, GFP_KERNEL);
-       event->scratch = scratch;
-
-       add_msg(event, hotplug_path, 1);
-       add_msg(event, "button", 1);
-       fill_event(event);
-       call_usermodehelper (event->argv[0], event->argv, event->envp);
-       kfree(scratch);
-       kfree(event);
-}
-#endif /* !LINUX_2_4 */
 
 static int fill_event (struct event_t *event)
 {
 
 static int fill_event (struct event_t *event)
 {
@@ -859,20 +1225,14 @@ static int fill_event (struct event_t *event)
        add_msg(event, buf, 0);
        snprintf(buf, 128, "SEEN=%ld", event->seen);
        add_msg(event, buf, 0);
        add_msg(event, buf, 0);
        snprintf(buf, 128, "SEEN=%ld", event->seen);
        add_msg(event, buf, 0);
-#ifndef LINUX_2_4
        snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
        add_msg(event, buf, 0);
        snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
        add_msg(event, buf, 0);
-#endif
 
        return 0;
 }
 
 
 
        return 0;
 }
 
 
-#ifndef LINUX_2_4
 static irqreturn_t button_handler(int irq, void *dev_id)
 static irqreturn_t button_handler(int irq, void *dev_id)
-#else
-static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
-#endif
 {
        struct button_t *b;
        u32 in, changed;
 {
        struct button_t *b;
        u32 in, changed;
@@ -884,7 +1244,7 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
 
        changed &= ~gpio_outen(0, 0);
 
 
        changed &= ~gpio_outen(0, 0);
 
-       for (b = platform.buttons; b->name; b++) { 
+       for (b = platform.buttons; b->name; b++) {
                struct event_t *event;
 
                if (!(b->gpio & changed)) continue;
                struct event_t *event;
 
                if (!(b->gpio & changed)) continue;
@@ -895,11 +1255,7 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
                        event->seen = (jiffies - b->seen)/HZ;
                        event->name = b->name;
                        event->action = b->pressed ? "pressed" : "released";
                        event->seen = (jiffies - b->seen)/HZ;
                        event->name = b->name;
                        event->action = b->pressed ? "pressed" : "released";
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
                        INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
                        INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
-#else
-                       INIT_WORK(&event->wq, (void *)(void *)hotplug_button, (void *)event);
-#endif
                        schedule_work(&event->wq);
                }
 
                        schedule_work(&event->wq);
                }
 
@@ -916,18 +1272,18 @@ static void register_leds(struct led_t *l)
        u32 val = 0;
 
        leds = proc_mkdir("led", diag);
        u32 val = 0;
 
        leds = proc_mkdir("led", diag);
-       if (!leds) 
+       if (!leds)
                return;
 
        for(; l->name; l++) {
                if (l->gpio & gpiomask)
                        continue;
                return;
 
        for(; l->name; l++) {
                if (l->gpio & gpiomask)
                        continue;
-       
+
                if (l->gpio & GPIO_TYPE_EXTIF) {
                        l->state = 0;
                        set_led_extif(l);
                } else {
                if (l->gpio & GPIO_TYPE_EXTIF) {
                        l->state = 0;
                        set_led_extif(l);
                } else {
-                       if (l->polarity != INPUT) oe_mask != l->gpio;
+                       if (l->polarity != INPUT) oe_mask |= l->gpio;
                        mask |= l->gpio;
                        val |= (l->polarity == NORMAL)?0:l->gpio;
                }
                        mask |= l->gpio;
                        val |= (l->polarity == NORMAL)?0:l->gpio;
                }
@@ -945,6 +1301,7 @@ static void register_leds(struct led_t *l)
        gpio_outen(mask, oe_mask);
        gpio_control(mask, 0);
        gpio_out(mask, val);
        gpio_outen(mask, oe_mask);
        gpio_control(mask, 0);
        gpio_out(mask, val);
+       gpio_setintmask(mask, 0);
 }
 
 static void unregister_leds(struct led_t *l)
 }
 
 static void unregister_leds(struct led_t *l)
@@ -992,18 +1349,13 @@ static void led_flash(unsigned long dummy) {
 
 static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
 {
 
 static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
 {
-#ifdef LINUX_2_4
-       struct inode *inode = file->f_dentry->d_inode;
-       struct proc_dir_entry *dent = inode->u.generic_ip;
-#else
        struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
        struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-#endif
        char *page;
        int len = 0;
        char *page;
        int len = 0;
-       
+
        if ((page = kmalloc(1024, GFP_KERNEL)) == NULL)
                return -ENOBUFS;
        if ((page = kmalloc(1024, GFP_KERNEL)) == NULL)
                return -ENOBUFS;
-       
+
        if (dent->data != NULL) {
                struct prochandler_t *handler = (struct prochandler_t *) dent->data;
                switch (handler->type) {
        if (dent->data != NULL) {
                struct prochandler_t *handler = (struct prochandler_t *) dent->data;
                switch (handler->type) {
@@ -1050,12 +1402,7 @@ static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t
 
 static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
 {
 
 static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
 {
-#ifdef LINUX_2_4
-       struct inode *inode = file->f_dentry->d_inode;
-       struct proc_dir_entry *dent = inode->u.generic_ip;
-#else
        struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
        struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-#endif
        char *page;
        int ret = -EINVAL;
 
        char *page;
        int ret = -EINVAL;
 
@@ -1067,14 +1414,14 @@ static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count,
                return -EINVAL;
        }
        page[count] = 0;
                return -EINVAL;
        }
        page[count] = 0;
-       
+
        if (dent->data != NULL) {
                struct prochandler_t *handler = (struct prochandler_t *) dent->data;
                switch (handler->type) {
                        case PROC_LED: {
                                struct led_t *led = (struct led_t *) handler->ptr;
                                int p = (led->polarity == NORMAL ? 0 : 1);
        if (dent->data != NULL) {
                struct prochandler_t *handler = (struct prochandler_t *) dent->data;
                switch (handler->type) {
                        case PROC_LED: {
                                struct led_t *led = (struct led_t *) handler->ptr;
                                int p = (led->polarity == NORMAL ? 0 : 1);
-                               
+
                                if (page[0] == 'f') {
                                        led->flash = 1;
                                        led_flash(0);
                                if (page[0] == 'f') {
                                        led->flash = 1;
                                        led_flash(0);
This page took 0.046935 seconds and 4 git commands to generate.