generic: ar8216: add setup_port field to ar8xxx_chip
[openwrt.git] / target / linux / adm5120 / files / drivers / usb / host / adm5120-hcd.c
index 4e88777..0412546 100644 (file)
 /*
- *     HCD driver for ADM5120 SoC
+ * ADM5120 HCD (Host Controller Driver) for USB
  *
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-hcd.c
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *   [ Initialisation is based on Linus'  ]
+ *   [ uhci code and gregs ahcd fragments ]
+ *   [ (C) Copyright 1999 Linus Torvalds  ]
+ *   [ (C) Copyright 1999 Gregory P. Smith]
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
  *
- *     Based on the ADMtek 2.4 driver
- *     (C) Copyright 2003 Junius Chen <juniusc@admtek.com.tw>
- *     Which again was based on the ohci and uhci drivers.
  */
 
 #include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
 #include <linux/delay.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/usb.h>
-#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/reboot.h>
+#include <linux/debugfs.h>
+#include <linux/io.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
+#include <asm/unaligned.h>
 #include <asm/byteorder.h>
-#include <asm/mach-adm5120/adm5120_info.h>
 
 #include "../core/hcd.h"
+#include "../core/hub.h"
 
-MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
-
-#define PFX    "adm5120-hcd: "
-
-#define ADMHCD_REG_CONTROL             0x00
-#define  ADMHCD_SW_RESET               0x00000008      /* Reset */
-#define  ADMHCD_DMAA                   0x00000004      /* DMA arbitration control */
-#define  ADMHCD_SW_INTREQ              0x00000002      /* request software int */
-#define  ADMHCD_HOST_EN                        0x00000001      /* Host enable */
-#define ADMHCD_REG_INTSTATUS           0x04
-#define  ADMHCD_INT_ACT                        0x80000000      /* Interrupt active */
-#define  ADMHCD_INT_FATAL              0x40000000      /* Fatal interrupt */
-#define  ADMHCD_INT_SW                 0x20000000      /* software interrupt */
-#define  ADMHCD_INT_TD                 0x00100000      /* TD completed */
-#define  ADMHCD_FNO                    0x00000800      /* Frame number overaflow */
-#define  ADMHCD_SO                     0x00000400      /* Scheduling overrun */
-#define  ADMHCD_INSMI                  0x00000200      /* Root hub status change */
-#define  ADMHCD_BABI                   0x00000100      /* Babble detected, host mode */
-#define  ADMHCD_RESI                   0x00000020      /* Resume detected */
-#define  ADMHCD_SOFI                   0x00000010      /* SOF transmitted/received, host mode */
-#define ADMHCD_REG_INTENABLE           0x08
-#define  ADMHCD_INT_EN                 0x80000000      /* Interrupt enable */
-#define  ADMHCD_INTMASK                        0x00000001      /* Interrupt mask */
-#define ADMHCD_REG_HOSTCONTROL         0x10
-#define  ADMHCD_DMA_EN                 0x00000004      /* USB host DMA enable */
-#define  ADMHCD_STATE_MASK             0x00000003
-#define  ADMHCD_STATE_RST              0x00000000      /* bus state reset */
-#define  ADMHCD_STATE_RES              0x00000001      /* bus state resume */
-#define  ADMHCD_STATE_OP               0x00000002      /* bus state operational */
-#define  ADMHCD_STATE_SUS              0x00000003      /* bus state suspended */
-#define ADMHCD_REG_FMINTERVAL          0x18
-#define ADMHCD_REG_FMNUMBER            0x1c
-#define ADMHCD_REG_LSTHRESH            0x70
-#define ADMHCD_REG_RHDESCR             0x74
-#define  ADMHCD_CRWE                   0x20000000      /* Clear wakeup enable */
-#define  ADMHCD_DRWE                   0x10000000      /* Device remote wakeup enable */
-#define  ADMHCD_HW_OCIC                        0x08000000      /* Over current indication change */
-#define  ADMHCD_LPSC                   0x04000000      /* Local power switch change */
-#define  ADMHCD_OCI                    0x02000000      /* Over current indication */
-#define  ADMHCD_LPS                    0x01000000      /* Local power switch/global power switch */
-#define  ADMHCD_NOCP                   0x00000800      /* No over current protect mode */
-#define  ADMHCD_OPCM                   0x00000400      /* Over current protect mode */
-#define  ADMHCD_NPS                    0x00000200      /* No Power Switch */
-#define  ADMHCD_PSM                    0x00000100      /* Power switch mode */
-#define ADMHCD_REG_PORTSTATUS0         0x78
-#define  ADMHCD_CCS                    0x00000001      /* current connect status */
-#define  ADMHCD_PES                    0x00000002      /* port enable status */
-#define  ADMHCD_PSS                    0x00000004      /* port suspend status */
-#define  ADMHCD_POCI                   0x00000008      /* port overcurrent indicator */
-#define  ADMHCD_PRS                    0x00000010      /* port reset status */
-#define  ADMHCD_PPS                    0x00000100      /* port power status */
-#define  ADMHCD_LSDA                   0x00000200      /* low speed device attached */
-#define  ADMHCD_CSC                    0x00010000      /* connect status change */
-#define  ADMHCD_PESC                   0x00020000      /* enable status change */
-#define  ADMHCD_PSSC                   0x00040000      /* suspend status change */
-#define  ADMHCD_OCIC                   0x00080000      /* overcurrent change*/
-#define  ADMHCD_PRSC                   0x00100000      /* reset status change */
-#define ADMHCD_REG_PORTSTATUS1         0x7c
-#define ADMHCD_REG_HOSTHEAD            0x80
-
-#define ADMHCD_NUMPORTS                        1
-#define ADMHCD_DESC_ALIGN      16
-
-struct admhcd_ed {
-       /* Don't change first four, they used for DMA */
-       u32                             control;
-       struct admhcd_td                *tail;
-       struct admhcd_td                *head;
-       struct admhcd_ed                *next;
-       /* the rest is for the driver only: */
-       struct admhcd_td                *cur;
-       struct usb_host_endpoint        *ep;
-       struct urb                      *urb;
-       struct admhcd_ed                *real;
-} __attribute__ ((packed));
-
-#define ADMHCD_ED_EPSHIFT      7               /* Shift for endpoint number */
-#define ADMHCD_ED_INT          0x00000800      /* Is this an int endpoint */
-#define ADMHCD_ED_SPEED                0x00002000      /* Is it a high speed dev? */
-#define ADMHCD_ED_SKIP         0x00004000      /* Skip this ED */
-#define ADMHCD_ED_FORMAT       0x00008000      /* Is this an isoc endpoint */
-#define ADMHCD_ED_MAXSHIFT     16              /* Shift for max packet size */
-
-struct admhcd_td {
-       /* Don't change first four, they are used for DMA */
-       u32                     control;
-       u32                     buffer;
-       u32                     buflen;
-       struct admhcd_td        *next;
-       /* the rest is for the driver only: */
-       struct urb              *urb;
-       struct admhcd_td        *real;
-} __attribute__ ((packed));
-
-#define ADMHCD_TD_OWN          0x80000000
-#define ADMHCD_TD_TOGGLE       0x00000000
-#define ADMHCD_TD_DATA0                0x01000000
-#define ADMHCD_TD_DATA1                0x01800000
-#define ADMHCD_TD_OUT          0x00200000
-#define ADMHCD_TD_IN           0x00400000
-#define ADMHCD_TD_SETUP                0x00000000
-#define ADMHCD_TD_ISO          0x00010000
-#define ADMHCD_TD_R            0x00040000
-#define ADMHCD_TD_INTEN                0x00010000
-
-static int admhcd_td_err[16] = {
-       0,              /* No */
-       -EREMOTEIO,     /* CRC */
-       -EREMOTEIO,     /* bit stuff */
-       -EREMOTEIO,     /* data toggle */
-       -EPIPE,         /* stall */
-       -ETIMEDOUT,     /* timeout */
-       -EPROTO,        /* pid err */
-       -EPROTO,        /* unexpected pid */
-       -EREMOTEIO,     /* data overrun */
-       -EREMOTEIO,     /* data underrun */
-       -ETIMEDOUT,     /* 1010 */
-       -ETIMEDOUT,     /* 1011 */
-       -EREMOTEIO,     /* buffer overrun */
-       -EREMOTEIO,     /* buffer underrun */
-       -ETIMEDOUT,     /* 1110 */
-       -ETIMEDOUT,     /* 1111 */
-};
-
-#define ADMHCD_TD_ERRMASK      0x38000000
-#define ADMHCD_TD_ERRSHIFT     27
-
-#define TD(td) ((struct admhcd_td *)(((u32)(td)) & ~(ADMHCD_DESC_ALIGN-1)))
-#define ED(ed) ((struct admhcd_ed *)(((u32)(ed)) & ~(ADMHCD_DESC_ALIGN-1)))
-
-struct admhcd {
-       spinlock_t      lock;
-
-       /* Root hub registers */
-       u32 rhdesca;
-       u32 rhdescb;
-       u32 rhstatus;
-       u32 rhport[2];
-
-       /* async schedule: control, bulk */
-       struct list_head async;
-       u32             base;
-       u32             dma_en;
-       unsigned long   flags;
-};
-
-static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
-{
-       return (struct admhcd *)(hcd->hcd_priv);
-}
-
-static inline struct usb_hcd *admhcd_to_hcd(struct admhcd *admhcd)
-{
-       return container_of((void *)admhcd, struct usb_hcd, hcd_priv);
-}
+#define DRIVER_VERSION "0.27.0"
+#define DRIVER_AUTHOR  "Gabor Juhos <juhosg@openwrt.org>"
+#define DRIVER_DESC    "ADMtek USB 1.1 Host Controller Driver"
 
-static char hcd_name[] = "adm5120-hcd";
+/*-------------------------------------------------------------------------*/
 
-static u32 admhcd_reg_get(struct admhcd *ahcd, int reg)
-{
-       return *(volatile u32 *)KSEG1ADDR(ahcd->base+reg);
-}
+#undef ADMHC_VERBOSE_DEBUG     /* not always helpful */
 
-static void admhcd_reg_set(struct admhcd *ahcd, int reg, u32 val)
-{
-       *(volatile u32 *)KSEG1ADDR(ahcd->base+reg) = val;
-}
-
-static void admhcd_lock(struct admhcd *ahcd)
-{
-       spin_lock_irqsave(&ahcd->lock, ahcd->flags);
-       ahcd->dma_en = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) &
-               ADMHCD_DMA_EN;
-       admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
-}
+/* For initializing controller (mask in an HCFS mode too) */
+#define        OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
 
-static void admhcd_unlock(struct admhcd *ahcd)
-{
-       admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL,
-               ADMHCD_STATE_OP | ahcd->dma_en);
-       spin_unlock_irqrestore(&ahcd->lock, ahcd->flags);
-}
+#define        ADMHC_INTR_INIT \
+               (ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
+               | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI)
 
-static struct admhcd_td *admhcd_td_alloc(struct admhcd_ed *ed, struct urb *urb)
-{
-       struct admhcd_td *tdn, *td;
-
-       tdn = kzalloc(sizeof(*tdn)+ADMHCD_DESC_ALIGN, GFP_ATOMIC);
-       if (!tdn)
-               return NULL;
-
-       tdn->real = tdn;
-       tdn = TD(KSEG1ADDR(tdn));
-       if (ed->cur == NULL) {
-               ed->cur = tdn;
-               ed->head = tdn;
-               ed->tail = tdn;
-               td = tdn;
-       } else {
-               /* Supply back the old tail and link in new td as tail */
-               td = TD(ed->tail);
-               TD(ed->tail)->next = tdn;
-               ed->tail = tdn;
-       }
-       td->urb = urb;
+/*-------------------------------------------------------------------------*/
 
-       return td;
-}
+static const char hcd_name[] = "admhc-hcd";
 
-static void admhcd_td_free(struct admhcd_ed *ed, struct urb *urb)
-{
-       struct admhcd_td *td, **tdp;
-
-       if (urb == NULL)
-               ed->control |= ADMHCD_ED_SKIP;
-       tdp = &ed->cur;
-       td = ed->cur;
-       do {
-               if (td->urb == urb)
-                       break;
-               tdp = &td->next;
-               td = TD(td->next);
-       } while (td);
-       while (td && td->urb == urb) {
-               *tdp = TD(td->next);
-               kfree(td->real);
-               td = *tdp;
-       }
-}
+#define        STATECHANGE_DELAY       msecs_to_jiffies(300)
 
-/* Find an endpoint's descriptor, if needed allocate a new one and link it
-   in the DMA chain
- */
-static struct admhcd_ed *admhcd_get_ed(struct admhcd *ahcd,
-               struct usb_host_endpoint *ep, struct urb *urb)
-{
-       struct admhcd_ed *hosthead;
-       struct admhcd_ed *found = NULL, *ed = NULL;
-       unsigned int pipe = urb->pipe;
-
-       admhcd_lock(ahcd);
-       hosthead = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
-       if (hosthead) {
-               for (ed = hosthead;; ed = ED(ed->next)) {
-                       if (ed->ep == ep) {
-                               found = ed;
-                               break;
-                       }
-                       if (ED(ed->next) == hosthead)
-                               break;
-               }
-       }
-       if (!found) {
-               found = kzalloc(sizeof(*found)+ADMHCD_DESC_ALIGN, GFP_ATOMIC);
-               if (!found)
-                       goto out;
-               found->real = found;
-               found->ep = ep;
-               found = ED(KSEG1ADDR(found));
-               found->control = usb_pipedevice(pipe) |
-                   (usb_pipeendpoint(pipe) << ADMHCD_ED_EPSHIFT) |
-                   (usb_pipeint(pipe) ? ADMHCD_ED_INT : 0) |
-                   (urb->dev->speed == USB_SPEED_FULL ? ADMHCD_ED_SPEED : 0) |
-                   (usb_pipeisoc(pipe) ? ADMHCD_ED_FORMAT : 0) |
-                   (usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)) << ADMHCD_ED_MAXSHIFT);
-               /* Alloc first dummy td */
-               admhcd_td_alloc(found, NULL);
-               if (hosthead) {
-                       found->next = hosthead;
-                       ed->next = found;
-               } else {
-                       found->next = found;
-                       admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)found);
-               }
-       }
-out:
-       admhcd_unlock(ahcd);
-       return found;
-}
+#include "adm5120.h"
 
-static struct admhcd_td *admhcd_td_fill(u32 control, struct admhcd_td *td,
-               dma_addr_t data, int len)
-{
-       td->buffer = data;
-       td->buflen = len;
-       td->control = control;
-       return TD(td->next);
-}
+static void admhc_dump(struct admhcd *ahcd, int verbose);
+static int admhc_init(struct admhcd *ahcd);
+static void admhc_stop(struct usb_hcd *hcd);
 
-static void admhcd_ed_start(struct admhcd *ahcd, struct admhcd_ed *ed)
-{
-       struct admhcd_td *td = ed->cur;
+#include "adm5120-dbg.c"
+#include "adm5120-mem.c"
+#include "adm5120-pm.c"
+#include "adm5120-hub.c"
+#include "adm5120-q.c"
 
-       if (ed->urb)
-               return;
-       if (td->urb) {
-               ed->urb = td->urb;
-               while (1) {
-                       td->control |= ADMHCD_TD_OWN;
-                       if (TD(td->next)->urb != td->urb) {
-                               td->buflen |= ADMHCD_TD_INTEN;
-                               break;
-                       }
-                       td = TD(td->next);
-               }
-       }
-       ed->head = TD(ed->head);
-       ahcd->dma_en |= ADMHCD_DMA_EN;
-}
+/*-------------------------------------------------------------------------*/
 
-static irqreturn_t admhcd_irq(struct usb_hcd *hcd)
+/*
+ * queue up an urb for anything except the root hub
+ */
+static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+               gfp_t mem_flags)
 {
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       u32 intstatus;
-
-       intstatus = admhcd_reg_get(ahcd, ADMHCD_REG_INTSTATUS);
-       if (intstatus & ADMHCD_INT_FATAL) {
-               admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_FATAL);
-               /* FIXME: handle fatal interrupts */
-       }
-
-       if (intstatus & ADMHCD_INT_SW) {
-               admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_SW);
-               /* FIXME: handle software interrupts */
-       }
-
-       if (intstatus & ADMHCD_INT_TD) {
-               struct admhcd_ed *ed, *head;
-
-               admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_TD);
-
-               head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
-               ed = head;
-               if (ed) do {
-                       /* Is it a finished TD? */
-                       if (ed->urb && !(ed->cur->control & ADMHCD_TD_OWN)) {
-                               struct admhcd_td *td;
-                               int error;
-
-                               td = ed->cur;
-                               error = (td->control & ADMHCD_TD_ERRMASK) >>
-                                   ADMHCD_TD_ERRSHIFT;
-                               ed->urb->status = admhcd_td_err[error];
-                               admhcd_td_free(ed, ed->urb);
-                               // Calculate real length!!!
-                               ed->urb->actual_length = ed->urb->transfer_buffer_length;
-                               ed->urb->hcpriv = NULL;
-                               usb_hcd_giveback_urb(hcd, ed->urb);
-                               ed->urb = NULL;
-                       }
-                       admhcd_ed_start(ahcd, ed);
-                       ed = ED(ed->next);
-               } while (ed != head);
-       }
+       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
+       struct ed       *ed;
+       struct urb_priv *urb_priv;
+       unsigned int    pipe = urb->pipe;
+       int             td_cnt = 0;
+       unsigned long   flags;
+       int             ret = 0;
 
-       return IRQ_HANDLED;
-}
+#ifdef ADMHC_VERBOSE_DEBUG
+       spin_lock_irqsave(&ahcd->lock, flags);
+       urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
+       spin_unlock_irqrestore(&ahcd->lock, flags);
+#endif
 
-static int admhcd_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
-               struct urb *urb, gfp_t mem_flags)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       struct admhcd_ed *ed;
-       struct admhcd_td *td;
-       int size = 0, i, zero = 0, ret = 0;
-       unsigned int pipe = urb->pipe, toggle = 0;
-       dma_addr_t data = (dma_addr_t)urb->transfer_buffer;
-       int data_len = urb->transfer_buffer_length;
-
-       ed = admhcd_get_ed(ahcd, ep, urb);
+       /* every endpoint has an ed, locate and maybe (re)initialize it */
+       ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
        if (!ed)
                return -ENOMEM;
 
-       switch(usb_pipetype(pipe)) {
+       /* for the private part of the URB we need the number of TDs */
+       switch (ed->type) {
        case PIPE_CONTROL:
-               size = 2;
-       case PIPE_INTERRUPT:
+               if (urb->transfer_buffer_length > TD_DATALEN_MAX)
+                       /* td_submit_urb() doesn't yet handle these */
+                       return -EMSGSIZE;
+
+               /* 1 TD for setup, 1 for ACK, plus ... */
+               td_cnt = 2;
+               /* FALLTHROUGH */
        case PIPE_BULK:
-       default:
-               size += urb->transfer_buffer_length / 4096;
-               if (urb->transfer_buffer_length % 4096)
-                       size++;
-               if (size == 0)
-                       size++;
-               else if (urb->transfer_flags & URB_ZERO_PACKET &&
-                   !(urb->transfer_buffer_length %
-                     usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)))) {
-                       size++;
-                       zero = 1;
-               }
+               /* one TD for every 4096 Bytes (can be upto 8K) */
+               td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX;
+               /* ... and for any remaining bytes ... */
+               if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
+                       td_cnt++;
+               /* ... and maybe a zero length packet to wrap it up */
+               if (td_cnt == 0)
+                       td_cnt++;
+               else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+                       && (urb->transfer_buffer_length
+                               % usb_maxpacket(urb->dev, pipe,
+                                       usb_pipeout(pipe))) == 0)
+                       td_cnt++;
+               break;
+       case PIPE_INTERRUPT:
+               /*
+                * for Interrupt IN/OUT transactions, each ED contains
+                * only 1 TD.
+                * TODO: check transfer_buffer_length?
+                */
+               td_cnt = 1;
                break;
        case PIPE_ISOCHRONOUS:
-               size = urb->number_of_packets;
+               /* number of packets from URB */
+               td_cnt = urb->number_of_packets;
                break;
        }
 
-       admhcd_lock(ahcd);
-       /* Remember the first td */
-       td = admhcd_td_alloc(ed, urb);
-       if (!td) {
-               ret = -ENOMEM;
-               goto out;
-       }
-       /* Allocate additionall tds first */
-       for (i = 1; i < size; i++) {
-               if (admhcd_td_alloc(ed, urb) == NULL) {
-                       admhcd_td_free(ed, urb);
-                       ret = -ENOMEM;
-                       goto out;
-               }
-       }
+       urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
+       if (!urb_priv)
+               return -ENOMEM;
 
-       if (usb_gettoggle(urb->dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
-               toggle = ADMHCD_TD_TOGGLE;
-       else {
-               toggle = ADMHCD_TD_DATA0;
-               usb_settoggle(urb->dev, usb_pipeendpoint(pipe),
-                   usb_pipeout(pipe), 1);
+       urb_priv->ed = ed;
+
+       spin_lock_irqsave(&ahcd->lock, flags);
+       /* don't submit to a dead HC */
+       if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+               ret = -ENODEV;
+               goto fail;
+       }
+       if (!HC_IS_RUNNING(hcd->state)) {
+               ret = -ENODEV;
+               goto fail;
        }
 
-       switch(usb_pipetype(pipe)) {
-       case PIPE_CONTROL:
-               td = admhcd_td_fill(ADMHCD_TD_SETUP | ADMHCD_TD_DATA0,
-                   td, (dma_addr_t)urb->setup_packet, 8);
-               while (data_len > 0) {
-                       td = admhcd_td_fill(ADMHCD_TD_DATA1
-                           | ADMHCD_TD_R |
-                           (usb_pipeout(pipe) ?
-                           ADMHCD_TD_OUT : ADMHCD_TD_IN), td,
-                           data, data_len % 4097);
-                       data_len -= 4096;
-               }
-               admhcd_td_fill(ADMHCD_TD_DATA1 | (usb_pipeout(pipe) ?
-                   ADMHCD_TD_IN : ADMHCD_TD_OUT), td,
-                   data, 0);
-               break;
-       case PIPE_INTERRUPT:
-       case PIPE_BULK:
-               //info ok for interrupt?
-               i = 0;
-               while(data_len > 4096) {
-                       td = admhcd_td_fill((usb_pipeout(pipe) ?
-                           ADMHCD_TD_OUT :
-                           ADMHCD_TD_IN | ADMHCD_TD_R) |
-                           (i ? ADMHCD_TD_TOGGLE : toggle), td,
-                           data, 4096);
-                       data += 4096;
-                       data_len -= 4096;
-                       i++;
+       ret = usb_hcd_link_urb_to_ep(hcd, urb);
+       if (ret)
+               goto fail;
+
+       /* schedule the ed if needed */
+       if (ed->state == ED_IDLE) {
+               ret = ed_schedule(ahcd, ed);
+               if (ret < 0) {
+                       usb_hcd_unlink_urb_from_ep(hcd, urb);
+                       goto fail;
                }
-               td = admhcd_td_fill((usb_pipeout(pipe) ?
-                   ADMHCD_TD_OUT : ADMHCD_TD_IN) |
-                   (i ? ADMHCD_TD_TOGGLE : toggle), td, data, data_len);
-               i++;
-               if (zero)
-                       admhcd_td_fill((usb_pipeout(pipe) ?
-                           ADMHCD_TD_OUT : ADMHCD_TD_IN) |
-                           (i ? ADMHCD_TD_TOGGLE : toggle), td, 0, 0);
-               break;
-       case PIPE_ISOCHRONOUS:
-               for (i = 0; i < urb->number_of_packets; i++) {
-                       td = admhcd_td_fill(ADMHCD_TD_ISO |
-                           ((urb->start_frame + i) & 0xffff), td,
-                           data + urb->iso_frame_desc[i].offset,
-                           urb->iso_frame_desc[i].length);
+               if (ed->type == PIPE_ISOCHRONOUS) {
+                       u16     frame = admhc_frame_no(ahcd);
+
+                       /* delay a few frames before the first TD */
+                       frame += max_t (u16, 8, ed->interval);
+                       frame &= ~(ed->interval - 1);
+                       frame |= ed->branch;
+                       urb->start_frame = frame;
+
+                       /* yes, only URB_ISO_ASAP is supported, and
+                        * urb->start_frame is never used as input.
+                        */
                }
-               break;
-       }
-       urb->hcpriv = ed;
-       admhcd_ed_start(ahcd, ed);
-out:
-       admhcd_unlock(ahcd);
+       } else if (ed->type == PIPE_ISOCHRONOUS)
+               urb->start_frame = ed->last_iso + ed->interval;
+
+       /* fill the TDs and link them to the ed; and
+        * enable that part of the schedule, if needed
+        * and update count of queued periodic urbs
+        */
+       urb->hcpriv = urb_priv;
+       td_submit_urb(ahcd, urb);
+
+#ifdef ADMHC_VERBOSE_DEBUG
+       admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
+#endif
+
+fail:
+       if (ret)
+               urb_priv_free(ahcd, urb_priv);
+
+       spin_unlock_irqrestore(&ahcd->lock, flags);
        return ret;
 }
 
-static int admhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+/*
+ * decouple the URB from the HC queues (TDs, urb_priv);
+ * reporting is always done
+ * asynchronously, and we might be dealing with an urb that's
+ * partially transferred, or an ED with other urbs being unlinked.
+ */
+static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+               int status)
 {
        struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       struct admhcd_ed *ed;
+       unsigned long flags;
+       int ret;
 
-       admhcd_lock(ahcd);
+       spin_lock_irqsave(&ahcd->lock, flags);
 
-       ed = urb->hcpriv;
-       if (ed && ed->urb != urb)
-               admhcd_td_free(ed, urb);
+#ifdef ADMHC_VERBOSE_DEBUG
+       urb_print(ahcd, urb, "DEQUEUE", 1, status);
+#endif
+       ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+       if (ret) {
+               /* Do nothing */
+               ;
+       } else if (HC_IS_RUNNING(hcd->state)) {
+               struct urb_priv *urb_priv;
+
+               /* Unless an IRQ completed the unlink while it was being
+                * handed to us, flag it for unlink and giveback, and force
+                * some upcoming INTR_SF to call finish_unlinks()
+                */
+               urb_priv = urb->hcpriv;
+               if (urb_priv) {
+                       if (urb_priv->ed->state == ED_OPER)
+                               start_ed_unlink(ahcd, urb_priv->ed);
+               }
+       } else {
+               /*
+                * with HC dead, we won't respect hc queue pointers
+                * any more ... just clean up every urb's memory.
+                */
+               if (urb->hcpriv)
+                       finish_urb(ahcd, urb, status);
+       }
+       spin_unlock_irqrestore(&ahcd->lock, flags);
 
-       admhcd_unlock(ahcd);
-       return 0;
+       return ret;
 }
 
-static void admhcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+/*-------------------------------------------------------------------------*/
+
+/* frees config/altsetting state for endpoints,
+ * including ED memory, dummy TD, and bulk/intr data toggle
+ */
+
+static void admhc_endpoint_disable(struct usb_hcd *hcd,
+               struct usb_host_endpoint *ep)
 {
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       struct admhcd_ed *ed, *edt, *head;
+       struct admhcd           *ahcd = hcd_to_admhcd(hcd);
+       unsigned long           flags;
+       struct ed               *ed = ep->hcpriv;
+       unsigned                limit = 1000;
 
-       admhcd_lock(ahcd);
+       /* ASSERT:  any requests/urbs are being unlinked */
+       /* ASSERT:  nobody can be submitting urbs for this any more */
 
-       head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
-       if (!head)
-               goto out;
-       for (ed = head; ED(ed->next) != head; ed = ED(ed->next))
-               if (ed->ep == ep)
+       if (!ed)
+               return;
+
+#ifdef ADMHC_VERBOSE_DEBUG
+       spin_lock_irqsave(&ahcd->lock, flags);
+       admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
+       spin_unlock_irqrestore(&ahcd->lock, flags);
+#endif
+
+rescan:
+       spin_lock_irqsave(&ahcd->lock, flags);
+
+       if (!HC_IS_RUNNING(hcd->state)) {
+sanitize:
+               ed->state = ED_IDLE;
+               finish_unlinks(ahcd, 0);
+       }
+
+       switch (ed->state) {
+       case ED_UNLINK:         /* wait for hw to finish? */
+               /* major IRQ delivery trouble loses INTR_SOFI too... */
+               if (limit-- == 0) {
+                       admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
+                       goto sanitize;
+               }
+               spin_unlock_irqrestore(&ahcd->lock, flags);
+               schedule_timeout_uninterruptible(1);
+               goto rescan;
+       case ED_IDLE:           /* fully unlinked */
+               if (list_empty(&ed->td_list)) {
+                       td_free(ahcd, ed->dummy);
+                       ed_free(ahcd, ed);
                        break;
-       if (ed->ep != ep)
-               goto out;
-       while (ed->cur)
-               admhcd_td_free(ed, ed->cur->urb);
-       if (head == ed) {
-               if (ED(ed->next) == ed) {
-                       admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0);
-                       ahcd->dma_en = 0;
-                       goto out_free;
                }
-               head = ED(ed->next);
-               for (edt = head; ED(edt->next) != head; edt = ED(edt->next));
-               edt->next = ED(ed->next);
-               admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)ed->next);
-               goto out_free;
+               /* else FALL THROUGH */
+       default:
+               /* caller was supposed to have unlinked any requests;
+                * that's not our job.  can't recover; must leak ed.
+                */
+               admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n",
+                       ed, ep->desc.bEndpointAddress, ed->state,
+                       list_empty(&ed->td_list) ? "" : " (has tds)");
+               td_free(ahcd, ed->dummy);
+               break;
        }
-       for (edt = head; edt->next != ed; edt = edt->next);
-       edt->next = ed->next;
 
-out_free:
-       kfree(ed->real);
-out:
-       admhcd_unlock(ahcd);
+       ep->hcpriv = NULL;
+
+       spin_unlock_irqrestore(&ahcd->lock, flags);
+       return;
 }
 
-static int admhcd_get_frame_number(struct usb_hcd *hcd)
+static int admhc_get_frame_number(struct usb_hcd *hcd)
 {
        struct admhcd *ahcd = hcd_to_admhcd(hcd);
 
-       return admhcd_reg_get(ahcd, ADMHCD_REG_FMNUMBER) & 0x0000ffff;
+       return admhc_frame_no(ahcd);
 }
 
-static int admhcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+static void admhc_usb_reset(struct admhcd *ahcd)
 {
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       int port;
-
-       *buf = 0;
-       for (port = 0; port < ADMHCD_NUMPORTS; port++) {
-               if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) &
-                   (ADMHCD_CSC | ADMHCD_PESC | ADMHCD_PSSC | ADMHCD_OCIC |
-                    ADMHCD_PRSC))
-                       *buf |= (1 << (port + 1));
-       }
-       return !!*buf;
+#if 0
+       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+       ahcd->hc_control &= OHCI_CTRL_RWC;
+       admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control);
+#else
+       /* FIXME */
+       ahcd->host_control = ADMHC_BUSS_RESET;
+       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
+#endif
 }
 
-static __u8 root_hub_hub_des[] = {
-       0x09,           /* __u8  bLength; */
-       0x29,           /* __u8  bDescriptorType; Hub-descriptor */
-       0x02,           /* __u8  bNbrPorts; */
-       0x0a, 0x00,     /* __u16 wHubCharacteristics; */
-       0x01,           /* __u8  bPwrOn2pwrGood; 2ms */
-       0x00,           /* __u8  bHubContrCurrent; 0mA */
-       0x00,           /* __u8  DeviceRemovable; */
-       0xff,           /* __u8  PortPwrCtrlMask; */
-};
-
-static int admhcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
-               u16 wIndex, char *buf, u16 wLength)
+/* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
+ * other cases where the next software may expect clean state from the
+ * "firmware".  this is bus-neutral, unlike shutdown() methods.
+ */
+static void
+admhc_shutdown(struct usb_hcd *hcd)
 {
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       int retval = 0, len;
-       unsigned int port = wIndex -1;
+       struct admhcd *ahcd;
 
-       switch (typeReq) {
+       ahcd = hcd_to_admhcd(hcd);
+       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
+       admhc_dma_disable(ahcd);
+       admhc_usb_reset(ahcd);
+       /* flush the writes */
+       admhc_writel_flush(ahcd);
+}
 
-       case GetHubStatus:
-               *(__le32 *)buf = cpu_to_le32(0);
-               break;
-       case GetPortStatus:
-               if (port >= ADMHCD_NUMPORTS)
-                       goto err;
-               *(__le32 *)buf = cpu_to_le32(
-                   admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4));
-               break;
-       case SetHubFeature:             /* We don't implement these */
-       case ClearHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto err;
-               }
-       case SetPortFeature:
-               if (port >= ADMHCD_NUMPORTS)
-                       goto err;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_SUSPEND:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_PSS);
-                       break;
-               case USB_PORT_FEAT_RESET:
-                       if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4)
-                           & ADMHCD_CCS) {
-                               admhcd_reg_set(ahcd,
-                                   ADMHCD_REG_PORTSTATUS0 + port*4,
-                                   ADMHCD_PRS | ADMHCD_CSC);
-                               mdelay(50);
-                               admhcd_reg_set(ahcd,
-                                   ADMHCD_REG_PORTSTATUS0 + port*4,
-                                   ADMHCD_PES | ADMHCD_CSC);
-                       }
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_PPS);
-                       break;
-               default:
-                       goto err;
-               }
-               break;
-       case ClearPortFeature:
-               if (port >= ADMHCD_NUMPORTS)
-                       goto err;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_CCS);
-                       break;
-               case USB_PORT_FEAT_C_ENABLE:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_PESC);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_POCI);
-                       break;
-               case USB_PORT_FEAT_C_SUSPEND:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_PSSC);
-               case USB_PORT_FEAT_POWER:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_LSDA);
-                       break;
-               case USB_PORT_FEAT_C_CONNECTION:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_CSC);
-                       break;
-               case USB_PORT_FEAT_C_OVER_CURRENT:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_OCIC);
-                       break;
-               case USB_PORT_FEAT_C_RESET:
-                       admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
-                           ADMHCD_PRSC);
-                       break;
-               default:
-                       goto err;
-               }
-               break;
-       case GetHubDescriptor:
-               len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
-               memcpy(buf, root_hub_hub_des, len);
-               break;
-       default:
-err:
-               retval = -EPIPE;
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+static void admhc_eds_cleanup(struct admhcd *ahcd)
+{
+       if (ahcd->ed_tails[PIPE_INTERRUPT]) {
+               ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
+               ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
        }
 
-       return retval;
-}
+       if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
+               ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
+               ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
+       }
 
-static int admhcd_start(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       unsigned long flags;
+       if (ahcd->ed_tails[PIPE_CONTROL]) {
+               ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
+               ahcd->ed_tails[PIPE_CONTROL] = NULL;
+       }
 
-       spin_lock_irqsave(&ahcd->lock, flags);
+       if (ahcd->ed_tails[PIPE_BULK]) {
+               ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
+               ahcd->ed_tails[PIPE_BULK] = NULL;
+       }
 
-       /* Initialise the HCD registers */
-       admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
-       mdelay(10);
+       ahcd->ed_head = NULL;
+}
 
-       admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
+#define ED_DUMMY_INFO  (ED_SPEED_FULL | ED_SKIP)
 
-       while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET) {
-               printk(KERN_WARNING PFX "waiting for reset to complete\n");
-               mdelay(1);
-       }
+static int admhc_eds_init(struct admhcd *ahcd)
+{
+       struct ed *ed;
 
-       //hcd->uses_new_polling = 1;
+       ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
+       if (!ed)
+               goto err;
 
-       /* Enable USB host mode */
-       admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN);
+       ahcd->ed_tails[PIPE_INTERRUPT] = ed;
 
-       /* Set host specific settings */
-       admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0x00000000);
-       admhcd_reg_set(ahcd, ADMHCD_REG_FMINTERVAL, 0x20002edf);
-       admhcd_reg_set(ahcd, ADMHCD_REG_LSTHRESH, 0x628);
+       ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
+       if (!ed)
+               goto err;
 
-       /* Set interrupts */
-       admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, ADMHCD_INT_ACT |
-               ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
-       admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_ACT |
-               ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+       ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
+       ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
+       ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
+       ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
 
-       /* Power on all ports */
-       admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC);
+       ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
+       if (!ed)
+               goto err;
 
-       /* HCD is now operationnal */
-       admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+       ahcd->ed_tails[PIPE_CONTROL] = ed;
+       ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
+       ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
+       ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
 
-       hcd->state = HC_STATE_RUNNING;
+       ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
+       if (!ed)
+               goto err;
 
-       spin_unlock_irqrestore(&ahcd->lock, flags);
+       ahcd->ed_tails[PIPE_BULK] = ed;
+       ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
+       ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
+       ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
+
+       ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
+
+#ifdef ADMHC_VERBOSE_DEBUG
+       admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
+       admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
+       admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
+       admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
+#endif
 
        return 0;
+
+err:
+       admhc_eds_cleanup(ahcd);
+       return -ENOMEM;
 }
 
-static int admhcd_sw_reset(struct admhcd *ahcd)
+/* init memory, and kick BIOS/SMM off */
+
+static int admhc_init(struct admhcd *ahcd)
 {
-       int retries = 15;
-       unsigned long flags;
-       int ret = 0;
+       struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
+       int ret;
 
-       spin_lock_irqsave(&ahcd->lock, flags);
+       admhc_disable(ahcd);
+       ahcd->regs = hcd->regs;
 
-       admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
-       mdelay(10);
+       /* Disable HC interrupts */
+       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
 
-       admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
+       /* Read the number of ports unless overridden */
+       if (ahcd->num_ports == 0)
+               ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
 
-       while (--retries) {
-               mdelay(1);
-               if (!(admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET))
-                       break;
-       }
-       if (!retries) {
-               printk(KERN_WARNING "%s: software reset timeout\n", hcd_name);
-               ret = -ETIME;
-       }
-       spin_unlock_irqrestore(&ahcd->lock, flags);
+       ret = admhc_mem_init(ahcd);
+       if (ret)
+               goto err;
+
+       /* init dummy endpoints */
+       ret = admhc_eds_init(ahcd);
+       if (ret)
+               goto err;
+
+       create_debug_files(ahcd);
+
+       return 0;
+
+err:
+       admhc_stop(hcd);
        return ret;
 }
 
-static int admhcd_reset(struct usb_hcd *hcd)
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * resets USB and controller
+ * enable interrupts
+ */
+static int admhc_run(struct admhcd *ahcd)
 {
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       u32 state = 0;
-       int ret, timeout = 15; /* ms */
-       unsigned long t;
+       u32                     temp;
+       int                     first = ahcd->fminterval == 0;
+       struct usb_hcd          *hcd = admhcd_to_hcd(ahcd);
+
+       admhc_disable(ahcd);
+
+       /* boot firmware should have set this up (5.1.1.3.1) */
+       if (first) {
+               temp = admhc_readl(ahcd, &ahcd->regs->fminterval);
+               ahcd->fminterval = temp & ADMHC_SFI_FI_MASK;
+               if (ahcd->fminterval != FI)
+                       admhc_dbg(ahcd, "fminterval delta %d\n",
+                               ahcd->fminterval - FI);
+               ahcd->fminterval |=
+                       (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
+               /* also: power/overcurrent flags in rhdesc */
+       }
 
-       ret = admhcd_sw_reset(ahcd);
-       if (ret)
-               return ret;
-
-       t = jiffies + msecs_to_jiffies(timeout);
-       do {
-               spin_lock_irq(&ahcd->lock);
-               state = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL);
-               spin_unlock_irq(&ahcd->lock);
-               state &= ADMHCD_STATE_MASK;
-               if (state == ADMHCD_STATE_RST)
-                       break;
-               msleep(4);
-       } while (time_before_eq(jiffies, t));
+#if 0  /* TODO: not applicable */
+       /* Reset USB nearly "by the book".  RemoteWakeupConnected was
+        * saved if boot firmware (BIOS/SMM/...) told us it's connected,
+        * or if bus glue did the same (e.g. for PCI add-in cards with
+        * PCI PM support).
+        */
+       if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0
+                       && !device_may_wakeup(hcd->self.controller))
+               device_init_wakeup(hcd->self.controller, 1);
+#endif
 
-       if (state != ADMHCD_STATE_RST) {
-               printk(KERN_WARNING "%s: device not ready after %dms\n",
-                       hcd_name, timeout);
-               ret = -ENODEV;
+       switch (ahcd->host_control & ADMHC_HC_BUSS) {
+       case ADMHC_BUSS_OPER:
+               temp = 0;
+               break;
+       case ADMHC_BUSS_SUSPEND:
+               /* FALLTHROUGH ? */
+       case ADMHC_BUSS_RESUME:
+               ahcd->host_control = ADMHC_BUSS_RESUME;
+               temp = 10 /* msec wait */;
+               break;
+       /* case ADMHC_BUSS_RESET: */
+       default:
+               ahcd->host_control = ADMHC_BUSS_RESET;
+               temp = 50 /* msec wait */;
+               break;
        }
+       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
 
-       return ret;
-}
+       /* flush the writes */
+       admhc_writel_flush(ahcd);
 
-static void admhcd_stop(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       unsigned long flags;
-       u32 val;
+       msleep(temp);
+       temp = admhc_read_rhdesc(ahcd);
+       if (!(temp & ADMHC_RH_NPS)) {
+               /* power down each port */
+               for (temp = 0; temp < ahcd->num_ports; temp++)
+                       admhc_write_portstatus(ahcd, temp, ADMHC_PS_CPP);
+       }
+       /* flush those writes */
+       admhc_writel_flush(ahcd);
+
+       /* 2msec timelimit here means no irqs/preempt */
+       spin_lock_irq(&ahcd->lock);
+
+       admhc_writel(ahcd, ADMHC_CTRL_SR,  &ahcd->regs->gencontrol);
+       temp = 30;      /* ... allow extra time */
+       while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
+               if (--temp == 0) {
+                       spin_unlock_irq(&ahcd->lock);
+                       admhc_err(ahcd, "USB HC reset timed out!\n");
+                       return -1;
+               }
+               udelay(1);
+       }
 
-       spin_lock_irqsave(&ahcd->lock, flags);
-       admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
+       /* enable HOST mode, before access any host specific register */
+       admhc_writel(ahcd, ADMHC_CTRL_UHFE,  &ahcd->regs->gencontrol);
 
-       /* Set global control of power for ports */
-       val = admhcd_reg_get(ahcd, ADMHCD_REG_RHDESCR);
-       val &= (~ADMHCD_PSM | ADMHCD_LPS);
-       admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, val);
+       /* Tell the controller where the descriptor list is */
+       admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
 
-       spin_unlock_irqrestore(&ahcd->lock, flags);
+       periodic_reinit(ahcd);
 
-       /* Ask for software reset */
-       admhcd_sw_reset(ahcd);
-}
+       /* use rhsc irqs after khubd is fully initialized */
+       hcd->poll_rh = 1;
+       hcd->uses_new_polling = 1;
 
+#if 0
+       /* wake on ConnectStatusChange, matching external hubs */
+       admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
+#else
+       /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
+#endif
 
-static struct hc_driver adm5120_hc_driver = {
-       .description =          hcd_name,
-       .product_desc =         "ADM5120 HCD",
-       .hcd_priv_size =        sizeof(struct admhcd),
-       .irq =                  admhcd_irq,
-       .flags =                HCD_USB11,
-       .urb_enqueue =          admhcd_urb_enqueue,
-       .urb_dequeue =          admhcd_urb_dequeue,
-       .endpoint_disable =     admhcd_endpoint_disable,
-       .get_frame_number =     admhcd_get_frame_number,
-       .hub_status_data =      admhcd_hub_status_data,
-       .hub_control =          admhcd_hub_control,
-       .start  =               admhcd_start,
-       .stop   =               admhcd_stop,
-       .reset =                admhcd_reset,
-};
-
-#define resource_len(r) (((r)->end - (r)->start) + 1)
-
-static int __init adm5120hcd_probe(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd;
-       struct admhcd *ahcd;
-       struct resource *data;
-       void __iomem *data_reg;
+       /* Choose the interrupts we care about now, others later on demand */
+       admhc_intr_ack(ahcd, ~0);
+       admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
+
+       admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
+
+       /* flush those writes */
+       admhc_writel_flush(ahcd);
 
-       int err = 0, irq;
+       /* start controller operations */
+       ahcd->host_control = ADMHC_BUSS_OPER;
+       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
 
-       if (pdev->num_resources < 2) {
-               printk(KERN_WARNING PFX "not enough resources\n");
-               err = -ENODEV;
-               goto out;
+       temp = 20;
+       while ((admhc_readl(ahcd, &ahcd->regs->host_control)
+                       & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
+               if (--temp == 0) {
+                       spin_unlock_irq(&ahcd->lock);
+                       admhc_err(ahcd, "unable to setup operational mode!\n");
+                       return -1;
+               }
+               mdelay(1);
        }
 
-       irq = platform_get_irq(pdev, 0);
-       data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       hcd->state = HC_STATE_RUNNING;
+
+       ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
+
+#if 0
+       /* FIXME: enabling DMA is always failed here for an unknown reason */
+       admhc_dma_enable(ahcd);
 
-       if (pdev->dev.dma_mask) {
-               printk(KERN_DEBUG PFX "no we won't dma\n");
-               return -EINVAL;
+       temp = 200;
+       while ((admhc_readl(ahcd, &ahcd->regs->host_control)
+                       & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
+               if (--temp == 0) {
+                       spin_unlock_irq(&ahcd->lock);
+                       admhc_err(ahcd, "unable to enable DMA!\n");
+                       admhc_dump(ahcd, 1);
+                       return -1;
+               }
+               mdelay(1);
        }
 
-       if (!data || irq < 0) {
-               printk(KERN_DEBUG PFX "either IRQ or data resource is invalid\n");
-               err = -ENODEV;
-               goto out;
+#endif
+
+       spin_unlock_irq(&ahcd->lock);
+
+       mdelay(ADMHC_POTPGT);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static irqreturn_t admhc_irq(struct usb_hcd *hcd)
+{
+       struct admhcd *ahcd = hcd_to_admhcd(hcd);
+       struct admhcd_regs __iomem *regs = ahcd->regs;
+       u32 ints;
+
+       ints = admhc_readl(ahcd, &regs->int_status);
+       if ((ints & ADMHC_INTR_INTA) == 0) {
+               /* no unmasked interrupt status is set */
+               return IRQ_NONE;
        }
 
-       if (!request_mem_region(data->start, resource_len(data), hcd_name)) {
-               printk(KERN_DEBUG PFX "cannot request memory regions for the data resource\n");
-               err = -EBUSY;
-               goto out;
+       ints &= admhc_readl(ahcd, &regs->int_enable);
+
+       if (ints & ADMHC_INTR_FATI) {
+               /* e.g. due to PCI Master/Target Abort */
+               admhc_disable(ahcd);
+               admhc_err(ahcd, "Fatal Error, controller disabled\n");
+               admhc_dump(ahcd, 1);
+               admhc_usb_reset(ahcd);
        }
 
-       data_reg = ioremap(data->start, resource_len(data));
-       if (data_reg == NULL) {
-               printk(KERN_DEBUG PFX "unable to ioremap\n");
-               err = -ENOMEM;
-               goto out_mem;
-        }
-
-       hcd = usb_create_hcd(&adm5120_hc_driver, &pdev->dev, pdev->dev.bus_id);
-       if (!hcd) {
-               printk(KERN_DEBUG PFX "unable to create the hcd\n");
-               err = -ENOMEM;
-               goto out_unmap;
+       if (ints & ADMHC_INTR_BABI) {
+               admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
+               admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
+               admhc_err(ahcd, "Babble Detected\n");
        }
 
-       hcd->rsrc_start = data->start;
-       hcd->rsrc_len = resource_len(data);
-       hcd->regs = data_reg;
+       if (ints & ADMHC_INTR_INSM) {
+               admhc_vdbg(ahcd, "Root Hub Status Change\n");
+               ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
+               admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
+
+               /* NOTE: Vendors didn't always make the same implementation
+                * choices for RHSC.  Many followed the spec; RHSC triggers
+                * on an edge, like setting and maybe clearing a port status
+                * change bit.  With others it's level-triggered, active
+                * until khubd clears all the port status change bits.  We'll
+                * always disable it here and rely on polling until khubd
+                * re-enables it.
+                */
+               admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
+               usb_hcd_poll_rh_status(hcd);
+       } else if (ints & ADMHC_INTR_RESI) {
+               /* For connect and disconnect events, we expect the controller
+                * to turn on RHSC along with RD.  But for remote wakeup events
+                * this might not happen.
+                */
+               admhc_vdbg(ahcd, "Resume Detect\n");
+               admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
+               hcd->poll_rh = 1;
+               if (ahcd->autostop) {
+                       spin_lock(&ahcd->lock);
+                       admhc_rh_resume(ahcd);
+                       spin_unlock(&ahcd->lock);
+               } else
+                       usb_hcd_resume_root_hub(hcd);
+       }
 
-       ahcd = hcd_to_admhcd(hcd);
-       ahcd->base = (u32)data_reg;
+       if (ints & ADMHC_INTR_TDC) {
+               admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
+               admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
+               if (HC_IS_RUNNING(hcd->state))
+                       admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
+               spin_lock(&ahcd->lock);
+               admhc_td_complete(ahcd);
+               spin_unlock(&ahcd->lock);
+               if (HC_IS_RUNNING(hcd->state))
+                       admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
+       }
 
-       spin_lock_init(&ahcd->lock);
-       INIT_LIST_HEAD(&ahcd->async);
+       if (ints & ADMHC_INTR_SO) {
+               /* could track INTR_SO to reduce available PCI/... bandwidth */
+               admhc_vdbg(ahcd, "Schedule Overrun\n");
+       }
 
-       hcd->product_desc = "ADM5120 HCD";
+#if 1
+       spin_lock(&ahcd->lock);
+       if (ahcd->ed_rm_list)
+               finish_unlinks(ahcd, admhc_frame_no(ahcd));
 
-       err = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-       if (err) {
-               printk(KERN_DEBUG PFX "unable to add hcd\n");
-               goto out_dev;
+       if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list
+                       && HC_IS_RUNNING(hcd->state))
+               admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
+       spin_unlock(&ahcd->lock);
+#else
+       if (ints & ADMHC_INTR_SOFI) {
+               admhc_vdbg(ahcd, "Start Of Frame\n");
+               spin_lock(&ahcd->lock);
+
+               /* handle any pending ED removes */
+               finish_unlinks(ahcd, admhc_frameno(ahcd));
+
+               /* leaving INTR_SOFI enabled when there's still unlinking
+                * to be done in the (next frame).
+                */
+               if ((ahcd->ed_rm_list == NULL) ||
+                       HC_IS_RUNNING(hcd->state) == 0)
+                       /*
+                        * disable INTR_SOFI if there are no unlinking to be
+                        * done (in the next frame)
+                        */
+                       admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
+
+               spin_unlock(&ahcd->lock);
        }
+#endif
 
-       return 0;
+       if (HC_IS_RUNNING(hcd->state)) {
+               admhc_intr_ack(ahcd, ints);
+               admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
+               admhc_writel_flush(ahcd);
+       }
 
-out_dev:
-       usb_put_hcd(hcd);
-out_unmap:
-       iounmap(data_reg);
-out_mem:
-       release_mem_region(data->start, resource_len(data));
-out:
-       return err;
+       return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_PM
-static int adm5120hcd_suspend(struct platform_device *pdev,  pm_message_t state)
-{
-       pdev->dev.power.power_state = state;
-       mdelay(1);
-       return 0;
-}
+/*-------------------------------------------------------------------------*/
 
-static int adm5120hcd_resume(struct platform_device *pdev, pm_message_t state)
+static void admhc_stop(struct usb_hcd *hcd)
 {
-       pdev->dev.power.power_state = PMSG_ON;
-       mdelay(1);
-       return 0;
-}
-#else
-#define adm5120hcd_suspend     NULL
-#define adm5120hcd_resume      NULL
-#endif
+       struct admhcd *ahcd = hcd_to_admhcd(hcd);
 
-static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-       struct admhcd *ahcd;
+       admhc_dump(ahcd, 1);
 
-       if (!hcd)
-               return 0;
-       ahcd = hcd_to_admhcd(hcd);
-       usb_remove_hcd(hcd);
+       flush_scheduled_work();
 
-       usb_put_hcd(hcd);
-       return 0;
+       admhc_usb_reset(ahcd);
+       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
+
+       free_irq(hcd->irq, hcd);
+       hcd->irq = -1;
+
+       remove_debug_files(ahcd);
+       admhc_eds_cleanup(ahcd);
+       admhc_mem_cleanup(ahcd);
 }
 
-static struct platform_driver adm5120hcd_driver = {
-       .probe =        adm5120hcd_probe,
-       .remove =       adm5120hcd_remove,
-       .suspend =      adm5120hcd_suspend,
-       .remove =       adm5120hcd_resume,
-       .driver =       {
-               .name   = (char *)hcd_name,
-               .owner  = THIS_MODULE,
-       },
-};
-
-static int __init adm5120hcd_init(void)
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ADM5120
+#include "adm5120-drv.c"
+#define PLATFORM_DRIVER                usb_hcd_adm5120_driver
+#endif
+
+#if    !defined(PLATFORM_DRIVER)
+#error "missing bus glue for admhc-hcd"
+#endif
+
+#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
+
+static int __init admhc_hcd_mod_init(void)
 {
-       int ret;
+       int ret = 0;
 
-       if (usb_disabled()) {
-               printk(KERN_DEBUG PFX "USB support is disabled\n");
+       if (usb_disabled())
                return -ENODEV;
-       }
 
-       if (mips_machgroup != MACH_GROUP_ADM5120) {
-               printk(KERN_DEBUG PFX "unsupported machine group\n");
-               return -ENODEV;
+       pr_info("%s: " DRIVER_INFO "\n", hcd_name);
+       pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
+               sizeof(struct ed), sizeof(struct td));
+
+#ifdef DEBUG
+       admhc_debug_root = debugfs_create_dir("admhc", NULL);
+       if (!admhc_debug_root) {
+               ret = -ENOENT;
+               goto error_debug;
        }
+#endif
+
+#ifdef PLATFORM_DRIVER
+       ret = platform_driver_register(&PLATFORM_DRIVER);
+       if (ret < 0)
+               goto error_platform;
+#endif
+
+       return ret;
 
-       ret = platform_driver_register(&adm5120hcd_driver);
-       if (ret == 0)
-               printk(KERN_INFO PFX "registered\n");
+#ifdef PLATFORM_DRIVER
+       platform_driver_unregister(&PLATFORM_DRIVER);
+error_platform:
+#endif
 
+#ifdef DEBUG
+       debugfs_remove(admhc_debug_root);
+       admhc_debug_root = NULL;
+error_debug:
+#endif
        return ret;
 }
+module_init(admhc_hcd_mod_init);
 
-static void __exit adm5120hcd_exit(void)
+static void __exit admhc_hcd_mod_exit(void)
 {
-       platform_driver_unregister(&adm5120hcd_driver);
-       printk(KERN_INFO PFX "driver unregistered\n");
+       platform_driver_unregister(&PLATFORM_DRIVER);
+#ifdef DEBUG
+       debugfs_remove(admhc_debug_root);
+#endif
 }
+module_exit(admhc_hcd_mod_exit);
 
-module_init(adm5120hcd_init);
-module_exit(adm5120hcd_exit);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
This page took 0.061325 seconds and 4 git commands to generate.