-diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig linux-avr32.git/arch/avr32/boards/atngw100/Kconfig
---- linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/boards/atngw100/Kconfig 2007-07-13 11:24:16.000000000 +0200
+ Documentation/kernel-parameters.txt | 5 +
+ MAINTAINERS | 6 +
+ Makefile | 2 +-
+ arch/arm/mach-at91/at91sam9261_devices.c | 14 +
+ arch/arm/mach-at91/at91sam9rl_devices.c | 14 +
+ arch/arm/mach-at91/board-sam9261ek.c | 1 +
+ arch/arm/mach-at91/board-sam9263ek.c | 1 +
+ arch/avr32/Kconfig | 54 +-
+ arch/avr32/Kconfig.debug | 10 -
+ arch/avr32/Makefile | 4 +-
+ arch/avr32/boards/atngw100/Kconfig | 12 +
+ arch/avr32/boards/atngw100/setup.c | 14 +-
+ arch/avr32/boards/atstk1000/Kconfig | 101 ++-
+ arch/avr32/boards/atstk1000/Makefile | 2 +
+ arch/avr32/boards/atstk1000/atstk1000.h | 2 +
+ arch/avr32/boards/atstk1000/atstk1002.c | 129 +--
+ arch/avr32/boards/atstk1000/atstk1003.c | 181 +++
+ arch/avr32/boards/atstk1000/atstk1004.c | 152 +++
+ arch/avr32/boards/atstk1000/setup.c | 64 +
+ arch/avr32/configs/atngw100_defconfig | 423 +++++---
+ arch/avr32/configs/atstk1002_defconfig | 661 ++++++++---
+ arch/avr32/configs/atstk1003_defconfig | 1032 ++++++++++++++++
+ arch/avr32/configs/atstk1004_defconfig | 627 ++++++++++
+ arch/avr32/drivers/Makefile | 1 +
+ arch/avr32/drivers/dw-dmac.c | 761 ++++++++++++
+ arch/avr32/drivers/dw-dmac.h | 42 +
+ arch/avr32/kernel/Makefile | 4 +-
+ arch/avr32/kernel/cpu.c | 96 ++-
+ arch/avr32/kernel/dma-controller.c | 34 +
+ arch/avr32/kernel/irq.c | 11 +
+ arch/avr32/kernel/kprobes.c | 5 +-
+ arch/avr32/kernel/nmi_debug.c | 82 ++
+ arch/avr32/kernel/ocd.c | 163 +++
+ arch/avr32/kernel/process.c | 5 +-
+ arch/avr32/kernel/ptrace.c | 5 +-
+ arch/avr32/kernel/setup.c | 2 +
+ arch/avr32/kernel/signal.c | 7 -
+ arch/avr32/kernel/traps.c | 21 +-
+ arch/avr32/mach-at32ap/Kconfig | 19 +-
+ arch/avr32/mach-at32ap/Makefile | 5 +-
+ arch/avr32/mach-at32ap/at32ap7000.c | 1730 --------------------------
+ arch/avr32/mach-at32ap/at32ap700x.c | 1809 ++++++++++++++++++++++++++++
+ arch/avr32/mach-at32ap/extint.c | 59 +-
+ arch/avr32/mach-at32ap/gpio-dev.c | 573 +++++++++
+ arch/avr32/mach-at32ap/pio.c | 76 ++
+ arch/avr32/mm/dma-coherent.c | 7 +
+ arch/avr32/mm/tlb.c | 2 +-
+ arch/avr32/oprofile/Makefile | 8 +
+ arch/avr32/oprofile/op_model_avr32.c | 235 ++++
+ drivers/i2c/busses/Kconfig | 8 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-atmeltwi.c | 436 +++++++
+ drivers/i2c/busses/i2c-atmeltwi.h | 117 ++
+ drivers/leds/Kconfig | 7 +
+ drivers/leds/Makefile | 1 +
+ drivers/leds/leds-atmel-pwm.c | 155 +++
+ drivers/misc/Kconfig | 9 +
+ drivers/misc/Makefile | 1 +
+ drivers/misc/atmel_pwm.c | 409 +++++++
+ drivers/mmc/host/Kconfig | 10 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/atmel-mci.c | 1176 ++++++++++++++++++
+ drivers/mmc/host/atmel-mci.h | 192 +++
+ drivers/mtd/chips/cfi_cmdset_0001.c | 43 +
+ drivers/mtd/chips/cfi_cmdset_0002.c | 6 +-
+ drivers/pcmcia/Kconfig | 7 +
+ drivers/pcmcia/Makefile | 1 +
+ drivers/pcmcia/at32_cf.c | 533 ++++++++
+ drivers/serial/Kconfig | 15 +
+ drivers/serial/atmel_serial.c | 884 +++++++++++---
+ drivers/spi/atmel_spi.c | 173 ++-
+ drivers/video/atmel_lcdfb.c | 149 +++-
+ drivers/video/backlight/Kconfig | 13 +
+ drivers/video/console/Kconfig | 2 +-
+ drivers/watchdog/Kconfig | 2 +-
+ include/asm-avr32/arch-at32ap/at32ap7000.h | 35 -
+ include/asm-avr32/arch-at32ap/at32ap700x.h | 35 +
+ include/asm-avr32/arch-at32ap/board.h | 11 +-
+ include/asm-avr32/arch-at32ap/cpu.h | 2 +-
+ include/asm-avr32/arch-at32ap/io.h | 4 +-
+ include/asm-avr32/arch-at32ap/portmux.h | 12 +
+ include/asm-avr32/dma-controller.h | 166 +++
+ include/asm-avr32/irq.h | 5 +
+ include/asm-avr32/kdebug.h | 1 +
+ include/asm-avr32/ocd.h | 5 +
+ include/asm-avr32/processor.h | 14 +
+ include/asm-avr32/ptrace.h | 13 +-
+ include/asm-avr32/thread_info.h | 1 +
+ include/linux/atmel_pwm.h | 70 ++
+ include/video/atmel_lcdc.h | 25 +-
+ kernel/ptrace.c | 2 +
+ sound/Kconfig | 2 +
+ sound/Makefile | 2 +-
+ sound/avr32/Kconfig | 11 +
+ sound/avr32/Makefile | 3 +
+ sound/avr32/ac97c.c | 914 ++++++++++++++
+ sound/avr32/ac97c.h | 71 ++
+ sound/oss/Kconfig | 4 +
+ sound/oss/Makefile | 1 +
+ sound/oss/at32_abdac.c | 722 +++++++++++
+ sound/oss/at32_abdac.h | 59 +
+ 101 files changed, 13294 insertions(+), 2520 deletions(-)
+ create mode 100644 arch/avr32/boards/atngw100/Kconfig
+ create mode 100644 arch/avr32/boards/atstk1000/atstk1003.c
+ create mode 100644 arch/avr32/boards/atstk1000/atstk1004.c
+ create mode 100644 arch/avr32/configs/atstk1003_defconfig
+ create mode 100644 arch/avr32/configs/atstk1004_defconfig
+ create mode 100644 arch/avr32/drivers/Makefile
+ create mode 100644 arch/avr32/drivers/dw-dmac.c
+ create mode 100644 arch/avr32/drivers/dw-dmac.h
+ create mode 100644 arch/avr32/kernel/dma-controller.c
+ create mode 100644 arch/avr32/kernel/nmi_debug.c
+ create mode 100644 arch/avr32/kernel/ocd.c
+ delete mode 100644 arch/avr32/mach-at32ap/at32ap7000.c
+ create mode 100644 arch/avr32/mach-at32ap/at32ap700x.c
+ create mode 100644 arch/avr32/mach-at32ap/gpio-dev.c
+ create mode 100644 arch/avr32/oprofile/Makefile
+ create mode 100644 arch/avr32/oprofile/op_model_avr32.c
+ create mode 100644 drivers/i2c/busses/i2c-atmeltwi.c
+ create mode 100644 drivers/i2c/busses/i2c-atmeltwi.h
+ create mode 100644 drivers/leds/leds-atmel-pwm.c
+ create mode 100644 drivers/misc/atmel_pwm.c
+ create mode 100644 drivers/mmc/host/atmel-mci.c
+ create mode 100644 drivers/mmc/host/atmel-mci.h
+ create mode 100644 drivers/pcmcia/at32_cf.c
+ delete mode 100644 include/asm-avr32/arch-at32ap/at32ap7000.h
+ create mode 100644 include/asm-avr32/arch-at32ap/at32ap700x.h
+ create mode 100644 include/asm-avr32/dma-controller.h
+ create mode 100644 include/linux/atmel_pwm.h
+ create mode 100644 sound/avr32/Kconfig
+ create mode 100644 sound/avr32/Makefile
+ create mode 100644 sound/avr32/ac97c.c
+ create mode 100644 sound/avr32/ac97c.h
+ create mode 100644 sound/oss/at32_abdac.c
+ create mode 100644 sound/oss/at32_abdac.h
+
+diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
+index c417877..17fc60e 100644
+--- a/Documentation/kernel-parameters.txt
++++ b/Documentation/kernel-parameters.txt
+@@ -34,6 +34,7 @@ parameter is applicable:
+ ALSA ALSA sound support is enabled.
+ APIC APIC support is enabled.
+ APM Advanced Power Management support is enabled.
++ AVR32 AVR32 architecture is enabled.
+ AX25 Appropriate AX.25 support is enabled.
+ BLACKFIN Blackfin architecture is enabled.
+ DRM Direct Rendering Management support is enabled.
+@@ -1123,6 +1124,10 @@ and is between 256 and 4096 characters. It is defined in the file
+ of returning the full 64-bit number.
+ The default is to return 64-bit inode numbers.
+
++ nmi_debug= [KNL,AVR32] Specify one or more actions to take
++ when a NMI is triggered.
++ Format: [state][,regs][,debounce][,die]
++
+ nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels
+
+ no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 2340cfb..e349a9e 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -671,6 +671,12 @@ W: http://www.atmel.com/products/AT91/
+ W: http://www.at91.com/
+ S: Maintained
+
++ATMEL AT91 / AT32 SERIAL DRIVER
++P: Haavard Skinnemoen
++M: hskinnemoen@atmel.com
++L: linux-kernel@vger.kernel.org
++S: Supported
++
+ ATMEL LCDFB DRIVER
+ P: Nicolas Ferre
+ M: nicolas.ferre@atmel.com
+diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
+index 64979a9..bfa3d18 100644
+--- a/arch/arm/mach-at91/at91sam9261_devices.c
++++ b/arch/arm/mach-at91/at91sam9261_devices.c
+@@ -530,6 +530,20 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+
++#ifdef CONFIG_FB_INTSRAM
++ {
++ void __iomem *fb;
++ struct resource *fb_res = &lcdc_resources[2];
++ size_t fb_len = fb_res->end - fb_res->start + 1;
++
++ fb = ioremap_writecombine(fb_res->start, fb_len);
++ if (fb) {
++ memset(fb, 0, fb_len);
++ iounmap(fb, fb_len);
++ }
++ }
++#endif
++
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+ }
+diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
+index 2bd60a3..84ee029 100644
+--- a/arch/arm/mach-at91/at91sam9rl_devices.c
++++ b/arch/arm/mach-at91/at91sam9rl_devices.c
+@@ -375,6 +375,20 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
+
++#ifdef CONFIG_FB_INTSRAM
++ {
++ void __iomem *fb;
++ struct resource *fb_res = &lcdc_resources[2];
++ size_t fb_len = fb_res->end - fb_res->start + 1;
++
++ fb = ioremap_writecombine(fb_res->start, fb_len);
++ if (fb) {
++ memset(fb, 0, fb_len);
++ iounmap(fb, fb_len);
++ }
++ }
++#endif
++
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+ }
+diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
+index 550ae59..0d275bb 100644
+--- a/arch/arm/mach-at91/board-sam9261ek.c
++++ b/arch/arm/mach-at91/board-sam9261ek.c
+@@ -322,6 +322,7 @@ static void at91_lcdc_power_control(int on)
+
+ /* Driver datas */
+ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .lcdcon_is_backlight = true,
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
+diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
+index ab9dcc0..39bded2 100644
+--- a/arch/arm/mach-at91/board-sam9263ek.c
++++ b/arch/arm/mach-at91/board-sam9263ek.c
+@@ -250,6 +250,7 @@ static void at91_lcdc_power_control(int on)
+
+ /* Driver datas */
+ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .lcdcon_is_backlight = true,
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
+diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
+index b77abce..3f09270 100644
+--- a/arch/avr32/Kconfig
++++ b/arch/avr32/Kconfig
+@@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32
+ config ARCH_HAS_ILOG2_U64
+ def_bool n
+
++config ARCH_SUPPORTS_OPROFILE
++ def_bool y
++
+ config GENERIC_HWEIGHT
+ def_bool y
+
+@@ -81,19 +84,23 @@ config PLATFORM_AT32AP
+ select MMU
+ select PERFORMANCE_COUNTERS
+
+-choice
+- prompt "AVR32 CPU type"
+- default CPU_AT32AP7000
++#
++# CPU types
++#
+
+-config CPU_AT32AP7000
+- bool "AT32AP7000"
++# AP7000 derivatives
++config CPU_AT32AP700X
++ bool
+ select PLATFORM_AT32AP
+-endchoice
+-
+-#
+-# CPU Daughterboards for ATSTK1000
+-config BOARD_ATSTK1002
++config CPU_AT32AP7000
++ bool
++ select CPU_AT32AP700X
++config CPU_AT32AP7001
++ bool
++ select CPU_AT32AP700X
++config CPU_AT32AP7002
+ bool
++ select CPU_AT32AP700X
+
+ choice
+ prompt "AVR32 board type"
+@@ -101,15 +108,18 @@ choice
+
+ config BOARD_ATSTK1000
+ bool "ATSTK1000 evaluation board"
+- select BOARD_ATSTK1002 if CPU_AT32AP7000
+
+ config BOARD_ATNGW100
+ bool "ATNGW100 Network Gateway"
++ select CPU_AT32AP7000
+ endchoice
+
+ if BOARD_ATSTK1000
+ source "arch/avr32/boards/atstk1000/Kconfig"
+ endif
++if BOARD_ATNGW100
++source "arch/avr32/boards/atngw100/Kconfig"
++endif
+
+ choice
+ prompt "Boot loader type"
+@@ -123,15 +133,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
+
+ config LOAD_ADDRESS
+ hex
+- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+
+ config ENTRY_ADDRESS
+ hex
+- default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+
+ config PHYS_OFFSET
+ hex
+- default 0x10000000 if CPU_AT32AP7000=y
++ default 0x10000000 if CPU_AT32AP700X=y
+
+ source "kernel/Kconfig.preempt"
+
+@@ -163,6 +173,20 @@ config OWNERSHIP_TRACE
+ enabling Nexus-compliant debuggers to keep track of the PID of the
+ currently executing task.
+
++config NMI_DEBUGGING
++ bool "NMI Debugging"
++ default n
++ help
++ Say Y here and pass the nmi_debug command-line parameter to
++ the kernel to turn on NMI debugging. Depending on the value
++ of the nmi_debug option, various pieces of information will
++ be dumped to the console when a Non-Maskable Interrupt
++ happens.
++
++config DW_DMAC
++ tristate "Synopsys DesignWare DMA Controller support"
++ default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+
+ source "kernel/Kconfig.hz"
+@@ -219,6 +243,8 @@ source "drivers/Kconfig"
+
+ source "fs/Kconfig"
+
++source "kernel/Kconfig.instrumentation"
++
+ source "arch/avr32/Kconfig.debug"
+
+ source "security/Kconfig"
+diff --git a/arch/avr32/Kconfig.debug b/arch/avr32/Kconfig.debug
+index 64ace00..2283933 100644
+--- a/arch/avr32/Kconfig.debug
++++ b/arch/avr32/Kconfig.debug
+@@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT
+
+ source "lib/Kconfig.debug"
+
+-config KPROBES
+- bool "Kprobes"
+- depends on DEBUG_KERNEL
+- help
+- Kprobes allows you to trap at almost any kernel address and
+- execute a callback function. register_kprobe() establishes
+- a probepoint and specifies the callback. Kprobes is useful
+- for kernel debugging, non-intrusive instrumentation and testing.
+- If in doubt, say "N".
+-
+ endmenu
+diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
+index 8791864..2d7bacd 100644
+--- a/arch/avr32/Makefile
++++ b/arch/avr32/Makefile
+@@ -16,7 +16,7 @@ KBUILD_AFLAGS += -mrelax -mno-pic
+ CFLAGS_MODULE += -mno-relax
+ LDFLAGS_vmlinux += --relax
+
+-cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000
++cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap
+
+ KBUILD_CFLAGS += $(cpuflags-y)
+ KBUILD_AFLAGS += $(cpuflags-y)
+@@ -31,6 +31,8 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
+ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
+ core-y += arch/avr32/kernel/
+ core-y += arch/avr32/mm/
++drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
++drivers-y += arch/avr32/drivers/
+ libs-y += arch/avr32/lib/
+
+ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
+diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
+new file mode 100644
+index 0000000..5d922df
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/Kconfig
@@ -0,0 +1,12 @@
+# NGW100 customization
+
+
+ Choose 'Y' here if you're having i2c-related problems and
+ want to rule out the i2c bus driver.
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32.git/arch/avr32/boards/atngw100/setup.c
---- linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/boards/atngw100/setup.c 2007-07-13 11:24:16.000000000 +0200
-@@ -9,10 +9,12 @@
- */
- #include <linux/clk.h>
- #include <linux/etherdevice.h>
-+#include <linux/i2c-gpio.h>
- #include <linux/init.h>
- #include <linux/linkage.h>
- #include <linux/platform_device.h>
- #include <linux/types.h>
-+#include <linux/leds.h>
- #include <linux/spi/spi.h>
-
+diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
+index 52987c8..383b825 100644
+--- a/arch/avr32/boards/atngw100/setup.c
++++ b/arch/avr32/boards/atngw100/setup.c
+@@ -20,7 +20,7 @@
#include <asm/io.h>
-@@ -21,6 +23,7 @@
- #include <asm/arch/at32ap7000.h>
+ #include <asm/setup.h>
+
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
#include <asm/arch/board.h>
#include <asm/arch/init.h>
-+#include <asm/arch/portmux.h>
-
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
-@@ -39,6 +42,11 @@
+ #include <asm/arch/portmux.h>
+@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
},
};
/*
* The next two functions should go away as the boot loader is
* supposed to initialize the macb address registers with a valid
-@@ -100,8 +108,46 @@
- at32_setup_serial_console(0);
- }
+@@ -124,6 +129,7 @@ static struct platform_device ngw_gpio_leds = {
+ }
+ };
-+static const struct gpio_led ngw_leds[] = {
-+ { .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ },
-+ { .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
-+ { .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ngw_led_data = {
-+ .num_leds = ARRAY_SIZE(ngw_leds),
-+ .leds = (void *) ngw_leds,
-+};
-+
-+static struct platform_device ngw_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = (void *) &ngw_led_data,
-+ }
-+};
-+
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
-+static struct i2c_gpio_platform_data i2c_gpio_data = {
-+ .sda_pin = GPIO_PIN_PA(6),
-+ .scl_pin = GPIO_PIN_PA(7),
-+};
-+
-+static struct platform_device i2c_gpio_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &i2c_gpio_data,
-+ },
-+};
+ static struct i2c_gpio_platform_data i2c_gpio_data = {
+ .sda_pin = GPIO_PIN_PA(6),
+ .scl_pin = GPIO_PIN_PA(7),
+@@ -139,6 +145,7 @@ static struct platform_device i2c_gpio_device = {
+ .platform_data = &i2c_gpio_data,
+ },
+ };
+#endif
-+
+
static int __init atngw100_init(void)
{
-+ unsigned i;
-+
- /*
- * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
- * reserve any pins for it.
-@@ -115,6 +161,22 @@
+@@ -157,6 +164,7 @@ static int __init atngw100_init(void)
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ at32_add_device_mci(0, &mci0_data);
-+ at32_add_device_usba(0, NULL);
-+
-+ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
-+ at32_select_gpio(ngw_leds[i].gpio,
-+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+ }
-+ platform_device_register(&ngw_gpio_leds);
-+
+ at32_add_device_usba(0, NULL);
+
+ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
+@@ -165,11 +173,15 @@ static int __init atngw100_init(void)
+ }
+ platform_device_register(&ngw_gpio_leds);
+
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
-+ at32_select_gpio(i2c_gpio_data.sda_pin, 0);
-+ at32_select_gpio(i2c_gpio_data.scl_pin, 0);
-+ platform_device_register(&i2c_gpio_device);
+ at32_select_gpio(i2c_gpio_data.sda_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(i2c_gpio_data.scl_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ platform_device_register(&i2c_gpio_device);
+#else
+ at32_add_device_twi(0);
+#endif
return 0;
}
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c linux-avr32.git/arch/avr32/boards/atstk1000/atstk1002.c
---- linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/boards/atstk1000/atstk1002.c 2007-07-12 13:59:49.000000000 +0200
-@@ -11,6 +11,7 @@
+diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
+index 718578f..56a8d8e 100644
+--- a/arch/avr32/boards/atstk1000/Kconfig
++++ b/arch/avr32/boards/atstk1000/Kconfig
+@@ -1,34 +1,53 @@
+ # STK1000 customization
+
+-if BOARD_ATSTK1002
++if BOARD_ATSTK1000
+
+-config BOARD_ATSTK1002_CUSTOM
+- bool "Non-default STK-1002 jumper settings"
++choice
++ prompt "ATSTK1000 CPU daughterboard type"
++ default BOARD_ATSTK1002
++
++config BOARD_ATSTK1002
++ bool "ATSTK1002"
++ select CPU_AT32AP7000
++
++config BOARD_ATSTK1003
++ bool "ATSTK1003"
++ select CPU_AT32AP7001
++
++config BOARD_ATSTK1004
++ bool "ATSTK1004"
++ select CPU_AT32AP7002
++
++endchoice
++
++
++config BOARD_ATSTK100X_CUSTOM
++ bool "Non-default STK1002/STK1003/STK1004 jumper settings"
+ help
+ You will normally leave the jumpers on the CPU card at their
+ default settings. If you need to use certain peripherals,
+ you will need to change some of those jumpers.
+
+-if BOARD_ATSTK1002_CUSTOM
++if BOARD_ATSTK100X_CUSTOM
+
+-config BOARD_ATSTK1002_SW1_CUSTOM
++config BOARD_ATSTK100X_SW1_CUSTOM
+ bool "SW1: use SSC1 (not SPI0)"
+ help
+ This also prevents using the external DAC as an audio interface,
+ and means you can't initialize the on-board QVGA display.
+
+-config BOARD_ATSTK1002_SW2_CUSTOM
++config BOARD_ATSTK100X_SW2_CUSTOM
+ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
+ help
+ If you change this you'll want an updated boot loader putting
+ the console on UART-C not UART-A.
+
+-config BOARD_ATSTK1002_SW3_CUSTOM
++config BOARD_ATSTK100X_SW3_CUSTOM
+ bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+ help
+ This also prevents using the external DAC as an audio interface.
+
+-config BOARD_ATSTK1002_SW4_CUSTOM
++config BOARD_ATSTK100X_SW4_CUSTOM
+ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
+ help
+ To use the camera interface you'll need a custom card (on the
+@@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM
+
+ config BOARD_ATSTK1002_SW5_CUSTOM
+ bool "SW5: use MACB1 (not LCDC)"
++ depends on BOARD_ATSTK1002
+
+ config BOARD_ATSTK1002_SW6_CUSTOM
+ bool "SW6: more GPIOs (not MACB0)"
++ depends on BOARD_ATSTK1002
+
+ endif # custom
+
+-config BOARD_ATSTK1002_SPI1
++config BOARD_ATSTK100X_SPI1
+ bool "Configure SPI1 controller"
+- depends on !BOARD_ATSTK1002_SW4_CUSTOM
++ depends on !BOARD_ATSTK100X_SW4_CUSTOM
+ help
+ All the signals for the second SPI controller are available on
+ GPIO lines and accessed through the J1 jumper block. Say "y"
+ here to configure that SPI controller.
+
+-config BOARD_ATSTK1002_J2_LED
++config BOARD_ATSTK1000_J2_LED
+ bool
+- default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++ default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
+
+ choice
+ prompt "LEDs connected to J2:"
+- depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++ depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
+ optional
+ help
+ Select this if you have jumpered the J2 jumper block to the
+@@ -64,16 +85,64 @@ choice
+ IDC cable. A default "heartbeat" trigger is provided, but
+ you can of course override this.
+
+-config BOARD_ATSTK1002_J2_LED8
++config BOARD_ATSTK1000_J2_LED8
+ bool "LED0..LED7"
+ help
+ Select this if J2 is jumpered to LED0..LED7 amber leds.
+
+-config BOARD_ATSTK1002_J2_RGB
++config BOARD_ATSTK1000_J2_RGB
+ bool "RGB leds"
+ help
+ Select this if J2 is jumpered to the RGB leds.
+
+ endchoice
+
+-endif # stk 1002
++config BOARD_ATSTK1000_EXTDAC
++ bool
++ depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
++ default y
++
++config BOARD_ATSTK100X_ENABLE_AC97
++ bool "Use AC97C instead of ABDAC"
++ help
++ Select this if you want to use the built-in AC97 controller
++ instead of the built-in Audio Bitstream DAC. These share
++ the same I/O pins on the AP7000, so both can't be enabled
++ at the same time.
++
++ Note that the STK1000 kit doesn't ship with an AC97 codec on
++ board, so say N unless you've got an expansion board with an
++ AC97 codec on it that you want to use.
++
++config BOARD_ATSTK1000_CF_HACKS
++ bool "ATSTK1000 CompactFlash hacks"
++ depends on !BOARD_ATSTK100X_SW4_CUSTOM
++ help
++ Select this if you have re-routed the CompactFlash RESET and
++ CD signals to GPIOs on your STK1000. This is necessary for
++ reset and card detection to work properly, although some CF
++ cards may be able to cope without reset.
++
++config BOARD_ATSTK1000_CF_RESET_PIN
++ hex "CompactFlash RESET pin"
++ default 0x30
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash RESET
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
++
++config BOARD_ATSTK1000_CF_DETECT_PIN
++ hex "CompactFlash DETECT pin"
++ default 0x3e
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash CD
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
++
++endif # stk 1000
+diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
+index 8e09922..beead86 100644
+--- a/arch/avr32/boards/atstk1000/Makefile
++++ b/arch/avr32/boards/atstk1000/Makefile
+@@ -1,2 +1,4 @@
+ obj-y += setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
++obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
++obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
+diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
+index 9a49ed0..9392d32 100644
+--- a/arch/avr32/boards/atstk1000/atstk1000.h
++++ b/arch/avr32/boards/atstk1000/atstk1000.h
+@@ -12,4 +12,6 @@
+
+ extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+
++void atstk1000_setup_j2_leds(void);
++
+ #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
+diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
+index 5be0d13..90436fa 100644
+--- a/arch/avr32/boards/atstk1000/atstk1002.c
++++ b/arch/avr32/boards/atstk1000/atstk1002.c
+@@ -11,7 +11,6 @@
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/kernel.h>
-+#include <linux/leds.h>
+-#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <linux/types.h>
-@@ -27,7 +28,6 @@
-
- #include "atstk1000.h"
+@@ -22,7 +21,7 @@
--#define SW2_DEFAULT /* MMCI and UART_A available */
+ #include <asm/io.h>
+ #include <asm/setup.h>
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+@@ -49,18 +48,16 @@ static struct eth_platform_data __initdata eth_data[2] = {
+ },
+ };
- struct eth_addr {
- u8 addr[6];
-@@ -36,6 +36,7 @@
- static struct eth_addr __initdata hw_addr[2];
- static struct eth_platform_data __initdata eth_data[2];
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static struct at73c213_board_info at73c213_data = {
+ .ssc_id = 0,
+ .shortname = "AVR32 STK1000 external DAC",
+ };
+ #endif
+-#endif
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
static struct spi_board_info spi0_board_info[] __initdata = {
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
{
- /* QVGA display */
-@@ -45,6 +46,18 @@
- .mode = SPI_MODE_3,
- },
+ /* AT73C213 */
+ .modalias = "at73c213",
+@@ -80,12 +77,25 @@ static struct spi_board_info spi0_board_info[] __initdata = {
};
-+#endif
-+
-+#ifdef CONFIG_BOARD_ATSTK1002_SPI1
-+static struct spi_board_info spi1_board_info[] __initdata = { {
-+ /* patch in custom entries here */
-+} };
-+#endif
-+
-+static struct mci_platform_data __initdata mci0_data = {
+ #endif
+
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ static struct spi_board_info spi1_board_info[] __initdata = { {
+ /* patch in custom entries here */
+ } };
+ #endif
+
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
++ .reset_pin = GPIO_PIN_NONE,
++#endif
++ .vcc_pin = GPIO_PIN_NONE,
++ .ready_pin = GPIO_PIN_PB(27),
++ .cs = 4,
+};
-
++
/*
* The next two functions should go away as the boot loader is
-@@ -101,12 +114,71 @@
+ * supposed to initialize the macb address registers with a valid
+@@ -141,68 +151,8 @@ static void __init set_hw_addr(struct platform_device *pdev)
clk_put(pclk);
}
--void __init setup_board(void)
-+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
-+
-+static struct gpio_led stk_j2_led[] = {
-+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
-+#define LEDSTRING "J2 jumpered to LED8"
-+ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-+ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-+ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-+ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-+ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-+ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-+ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-+ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-+ .default_trigger = "heartbeat", },
-+#else /* RGB */
-+#define LEDSTRING "J2 jumpered to RGB LEDs"
-+ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
-+ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
-+ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
-+
-+ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
-+ .default_trigger = "heartbeat", },
-+ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
-+ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
-+ .default_trigger = "heartbeat", },
-+ /* PB16, PB30 unused */
-+#endif
-+};
-+
-+static struct gpio_led_platform_data stk_j2_led_data = {
-+ .num_leds = ARRAY_SIZE(stk_j2_led),
-+ .leds = stk_j2_led,
-+};
-+
-+static struct platform_device stk_j2_led_dev = {
-+ .name = "leds-gpio",
-+ .id = 2, /* gpio block J2 */
-+ .dev = {
-+ .platform_data = &stk_j2_led_data,
-+ },
-+};
-+
-+static void setup_j2_leds(void)
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
+-
+-static struct gpio_led stk_j2_led[] = {
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
+-#define LEDSTRING "J2 jumpered to LED8"
+- { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+- { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+- { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+- { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+- { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+- { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+- { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+- { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+- .default_trigger = "heartbeat", },
+-#else /* RGB */
+-#define LEDSTRING "J2 jumpered to RGB LEDs"
+- { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
+- { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
+- { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
+-
+- { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
+- .default_trigger = "heartbeat", },
+- { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
+- { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
+- .default_trigger = "heartbeat", },
+- /* PB16, PB30 unused */
+-#endif
+-};
+-
+-static struct gpio_led_platform_data stk_j2_led_data = {
+- .num_leds = ARRAY_SIZE(stk_j2_led),
+- .leds = stk_j2_led,
+-};
+-
+-static struct platform_device stk_j2_led_dev = {
+- .name = "leds-gpio",
+- .id = 2, /* gpio block J2 */
+- .dev = {
+- .platform_data = &stk_j2_led_data,
+- },
+-};
+-
+-static void setup_j2_leds(void)
+-{
+- unsigned i;
+-
+- for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
+- at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+-
+- printk("STK1002: " LEDSTRING "\n");
+- platform_device_register(&stk_j2_led_dev);
+-}
+-
+-#else
+-static void setup_j2_leds(void)
+-{
+-}
+-#endif
+-
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-static void __init at73c213_set_clk(struct at73c213_board_info *info)
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1002_setup_extdac(void)
{
--#ifdef SW2_DEFAULT
-- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-+ unsigned i;
-+
-+ for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
-+ at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
-+
-+ printk("STK1002: " LEDSTRING "\n");
-+ platform_device_register(&stk_j2_led_dev);
-+}
-+
- #else
-+static void setup_j2_leds(void)
+ struct clk *gclk;
+ struct clk *pll;
+@@ -220,7 +170,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info)
+ }
+
+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+- info->dac_clk = gclk;
++ at73c213_data.dac_clk = gclk;
+
+ err_set_clk:
+ clk_put(pll);
+@@ -229,12 +179,16 @@ err_pll:
+ err_gclk:
+ return;
+ }
+-#endif
+-#endif
++#else
++static void __init atstk1002_setup_extdac(void)
+{
-+}
-+#endif
+
-+void __init setup_board(void)
-+{
-+#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
-+#else
-+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
- #endif
- /* USART 2/unused: expansion connector */
- at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
-@@ -140,18 +212,40 @@
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+
+ void __init setup_board(void)
+ {
+-#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ #else
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+@@ -271,7 +225,7 @@ static int __init atstk1002_init(void)
at32_add_system_devices();
--#ifdef SW2_DEFAULT
-- at32_add_device_usart(0);
--#else
-+#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+-#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_usart(1);
+ #else
+ at32_add_device_usart(0);
+@@ -281,12 +235,16 @@ static int __init atstk1002_init(void)
+ #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ set_hw_addr(at32_add_device_eth(0, ð_data[0]));
+ #endif
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ #endif
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
++ at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
++#endif
+ #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
+ set_hw_addr(at32_add_device_eth(1, ð_data[1]));
+ #else
+@@ -294,17 +252,18 @@ static int __init atstk1002_init(void)
+ fbmem_start, fbmem_size);
+ #endif
+ at32_add_device_usba(0, NULL);
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
+#else
-+ at32_add_device_usart(0);
++ at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ at32_add_device_ssc(0, ATMEL_SSC_TX);
#endif
- at32_add_device_usart(2);
++ at32_add_device_cf(0, 2, &cf0_data);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
- set_hw_addr(at32_add_device_eth(0, ð_data[0]));
+- setup_j2_leds();
-
-- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+- at73c213_set_clk(&at73c213_data);
+-#endif
+-#endif
++ atstk1000_setup_j2_leds();
++ atstk1002_setup_extdac();
+
+ return 0;
+ }
+diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
+new file mode 100644
+index 0000000..768d204
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1003.c
+@@ -0,0 +1,181 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++#endif
++ /*
++ * We can control the LTV350QV LCD panel, but it isn't much
++ * point since we don't have an LCD controller...
++ */
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++ /* patch in custom entries here */
++} };
+#endif
-+#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
-+ set_hw_addr(at32_add_device_eth(1, ð_data[1]));
++
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
+#else
- at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size);
++ .detect_pin = GPIO_PIN_NONE,
++ .reset_pin = GPIO_PIN_NONE,
++#endif
++ .vcc_pin = GPIO_PIN_NONE,
++ .ready_pin = GPIO_PIN_PB(27),
++ .cs = 4,
++};
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1003_setup_extdac(void)
++{
++ struct clk *gclk;
++ struct clk *pll;
++
++ gclk = clk_get(NULL, "gclk0");
++ if (IS_ERR(gclk))
++ goto err_gclk;
++ pll = clk_get(NULL, "pll0");
++ if (IS_ERR(pll))
++ goto err_pll;
++
++ if (clk_set_parent(gclk, pll)) {
++ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++ goto err_set_clk;
++ }
++
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++ clk_put(pll);
++err_pll:
++ clk_put(gclk);
++err_gclk:
++ return;
++}
++#else
++static void __init atstk1003_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#else
++ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++ /* USART 2/unused: expansion connector */
++ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
++
++ at32_setup_serial_console(0);
++}
++
++static int __init atstk1003_init(void)
++{
++ /*
++ * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
++ * SDRAM-specific pins so that nobody messes with them.
++ */
++ at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
++ at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
++ at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
++ at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
++ at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
++ at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
++ at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
++ at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
++ at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
++ at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
++ at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
++ at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
++ at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
++ at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
++ at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
++ at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
++ at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
++
++ at32_add_system_devices();
++
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_usart(1);
++#else
++ at32_add_device_usart(0);
+#endif
++ at32_add_device_usart(2);
+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+#endif
-+#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+#endif
-+ at32_add_device_twi(0);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-+ at32_add_device_mci(0, &mci0_data);
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
+#endif
+ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
++#else
+ at32_add_device_abdac(0);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ at32_add_device_ssc(0, ATMEL_SSC_TX);
+#endif
++ at32_add_device_cf(0, 2, &cf0_data);
+
-+ setup_j2_leds();
-
- return 0;
- }
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig linux-avr32.git/arch/avr32/boards/atstk1000/Kconfig
---- linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/boards/atstk1000/Kconfig 2007-07-12 13:59:49.000000000 +0200
-@@ -0,0 +1,79 @@
-+# STK1000 customization
++ atstk1000_setup_j2_leds();
++ atstk1003_setup_extdac();
++
++ return 0;
++}
++postcore_initcall(atstk1003_init);
+diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
+new file mode 100644
+index 0000000..96015dd
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1004.c
+@@ -0,0 +1,152 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
+
-+if BOARD_ATSTK1002
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
+
-+config BOARD_ATSTK1002_CUSTOM
-+ bool "Non-default STK-1002 jumper settings"
-+ help
-+ You will normally leave the jumpers on the CPU card at their
-+ default settings. If you need to use certain peripherals,
-+ you will need to change some of those jumpers.
++#include <video/atmel_lcdc.h>
+
-+if BOARD_ATSTK1002_CUSTOM
++#include <asm/setup.h>
+
-+config BOARD_ATSTK1002_SW1_CUSTOM
-+ bool "SW1: use SSC1 (not SPI0)"
-+ help
-+ This also prevents using the external DAC as an audio interface,
-+ and means you can't initialize the on-board QVGA display.
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
+
-+config BOARD_ATSTK1002_SW2_CUSTOM
-+ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
-+ help
-+ If you change this you'll want an updated boot loader putting
-+ the console on UART-C not UART-A.
++#include "atstk1000.h"
+
-+config BOARD_ATSTK1002_SW3_CUSTOM
-+ bool "SW3: use TIMER1 (not SSC0 and GCLK)"
-+ help
-+ This also prevents using the external DAC as an audio interface.
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++#endif
+
-+config BOARD_ATSTK1002_SW4_CUSTOM
-+ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
-+ help
-+ To use the camera interface you'll need a custom card (on the
-+ PCI-format connector) connect a video sensor.
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++#endif
++ {
++ /* QVGA display */
++ .modalias = "ltv350qv",
++ .max_speed_hz = 16000000,
++ .chip_select = 1,
++ .mode = SPI_MODE_3,
++ },
++};
++#endif
+
-+config BOARD_ATSTK1002_SW5_CUSTOM
-+ bool "SW5: use MACB1 (not LCDC)"
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++ /* patch in custom entries here */
++} };
++#endif
+
-+config BOARD_ATSTK1002_SW6_CUSTOM
-+ bool "SW6: more GPIOs (not MACB0)"
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1004_setup_extdac(void)
++{
++ struct clk *gclk;
++ struct clk *pll;
++
++ gclk = clk_get(NULL, "gclk0");
++ if (IS_ERR(gclk))
++ goto err_gclk;
++ pll = clk_get(NULL, "pll0");
++ if (IS_ERR(pll))
++ goto err_pll;
++
++ if (clk_set_parent(gclk, pll)) {
++ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++ goto err_set_clk;
++ }
+
-+endif # custom
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ at73c213_data.dac_clk = gclk;
+
-+config BOARD_ATSTK1002_SPI1
-+ bool "Configure SPI1 controller"
-+ depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+ help
-+ All the signals for the second SPI controller are available on
-+ GPIO lines and accessed through the J1 jumper block. Say "y"
-+ here to configure that SPI controller.
++err_set_clk:
++ clk_put(pll);
++err_pll:
++ clk_put(gclk);
++err_gclk:
++ return;
++}
++#else
++static void __init atstk1004_setup_extdac(void)
++{
+
-+config BOARD_ATSTK1002_J2_LED
-+ bool
-+ default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+
-+choice
-+ prompt "LEDs connected to J2:"
-+ depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
-+ optional
-+ help
-+ Select this if you have jumpered the J2 jumper block to the
-+ LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
-+ IDC cable. A default "heartbeat" trigger is provided, but
-+ you can of course override this.
++void __init setup_board(void)
++{
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#else
++ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++ /* USART 2/unused: expansion connector */
++ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+
-+config BOARD_ATSTK1002_J2_LED8
-+ bool "LED0..LED7"
-+ help
-+ Select this if J2 is jumpered to LED0..LED7 amber leds.
++ at32_setup_serial_console(0);
++}
+
-+config BOARD_ATSTK1002_J2_RGB
-+ bool "RGB leds"
-+ help
-+ Select this if J2 is jumpered to the RGB leds.
++static int __init atstk1004_init(void)
++{
++ at32_add_system_devices();
+
-+endchoice
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_usart(1);
++#else
++ at32_add_device_usart(0);
++#endif
++ at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
++#endif
++ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
++ fbmem_start, fbmem_size);
++ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
++#else
++ at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++ at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++
++ atstk1000_setup_j2_leds();
++ atstk1004_setup_extdac();
++
++ return 0;
++}
++postcore_initcall(atstk1004_init);
+diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
+index c9af409..8bedf93 100644
+--- a/arch/avr32/boards/atstk1000/setup.c
++++ b/arch/avr32/boards/atstk1000/setup.c
+@@ -10,13 +10,17 @@
+ #include <linux/bootmem.h>
+ #include <linux/fb.h>
+ #include <linux/init.h>
++#include <linux/platform_device.h>
+ #include <linux/types.h>
+ #include <linux/linkage.h>
+
+ #include <video/atmel_lcdc.h>
+
+ #include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
+
+ #include "atstk1000.h"
+
+@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
+ .default_monspecs = &atstk1000_default_monspecs,
+ .guard_time = 2,
+ };
++
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
++#include <linux/leds.h>
++
++static struct gpio_led stk1000_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++ .default_trigger = "heartbeat", },
++#else /* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
++ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
++
++ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
++ .default_trigger = "heartbeat", },
++ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
++ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
++ .default_trigger = "heartbeat", },
++ /* PB16, PB30 unused */
++#endif
++};
++
++static struct gpio_led_platform_data stk1000_j2_led_data = {
++ .num_leds = ARRAY_SIZE(stk1000_j2_led),
++ .leds = stk1000_j2_led,
++};
++
++static struct platform_device stk1000_j2_led_dev = {
++ .name = "leds-gpio",
++ .id = 2, /* gpio block J2 */
++ .dev = {
++ .platform_data = &stk1000_j2_led_data,
++ },
++};
+
-+endif # stk 1002
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig linux-avr32.git/arch/avr32/configs/atngw100_defconfig
---- linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/configs/atngw100_defconfig 2007-07-13 11:24:16.000000000 +0200
-@@ -1,7 +1,7 @@
++void __init atstk1000_setup_j2_leds(void)
++{
++ unsigned i;
++
++ for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
++ at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++
++ printk("STK1000: " LEDSTRING "\n");
++ platform_device_register(&stk1000_j2_led_dev);
++}
++#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
++void __init atstk1000_setup_j2_leds(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
+diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
+index b799a68..2ddc6f5 100644
+--- a/arch/avr32/configs/atngw100_defconfig
++++ b/arch/avr32/configs/atngw100_defconfig
+@@ -1,46 +1,51 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc5
-# Sat Jun 23 15:40:05 2007
-+# Linux kernel version: 2.6.22.atmel.1
-+# Thu Jul 12 17:49:20 2007
++# Linux kernel version: 2.6.24
++# Tue Feb 5 16:37:27 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
-@@ -114,6 +114,7 @@
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_BSD_PROCESS_ACCT_V3=y
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
+@@ -61,35 +66,28 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -111,17 +109,20 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
CONFIG_CPU_AT32AP7000=y
# CONFIG_BOARD_ATSTK1000 is not set
CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
++CONFIG_BOARD_ATNGW100_I2C_GPIO=y
CONFIG_LOADER_U_BOOT=y
#
-@@ -122,6 +123,7 @@
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
-@@ -145,6 +147,7 @@
+@@ -141,10 +142,14 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_NMI_DEBUGGING is not set
+CONFIG_DW_DMAC=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
-@@ -153,6 +156,27 @@
+@@ -153,13 +158,31 @@ CONFIG_HZ=250
CONFIG_CMDLINE=""
#
-+# Power managment options
-+#
-+
-+#
+-# Bus options
++# Power management options
+ #
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+ #
+-# PCCARD (PCMCIA/CardBus) support
+# CPU Frequency scaling
-+#
+ #
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
- # Bus options
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+
#
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -187,13 +211,8 @@
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- CONFIG_IP_MULTICAST=y
--CONFIG_IP_ADVANCED_ROUTER=y
--CONFIG_ASK_IP_FIB_HASH=y
--# CONFIG_IP_FIB_TRIE is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_MULTIPLE_TABLES is not set
--# CONFIG_IP_ROUTE_MULTIPATH is not set
--# CONFIG_IP_ROUTE_VERBOSE is not set
- CONFIG_IP_PNP=y
- CONFIG_IP_PNP_DHCP=y
- # CONFIG_IP_PNP_BOOTP is not set
-@@ -240,6 +259,7 @@
+@@ -213,6 +236,7 @@ CONFIG_INET_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_TRANSPORT=y
+ CONFIG_INET_XFRM_MODE_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+@@ -240,6 +264,7 @@ CONFIG_IPV6_SIT=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
-@@ -284,6 +304,7 @@
+@@ -252,6 +277,7 @@ CONFIG_NF_CONNTRACK_MARK=y
+ # CONFIG_NF_CONNTRACK_EVENTS is not set
+ CONFIG_NF_CT_PROTO_GRE=m
+ # CONFIG_NF_CT_PROTO_SCTP is not set
++# CONFIG_NF_CT_PROTO_UDPLITE is not set
+ CONFIG_NF_CONNTRACK_AMANDA=m
+ CONFIG_NF_CONNTRACK_FTP=m
+ CONFIG_NF_CONNTRACK_H323=m
+@@ -269,9 +295,11 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
+ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+ CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+ # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+ CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+ CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+ CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+ # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+@@ -284,6 +312,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-@@ -359,13 +380,19 @@
+@@ -292,6 +321,8 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
+ CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+ CONFIG_NETFILTER_XT_MATCH_STRING=m
+ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++# CONFIG_NETFILTER_XT_MATCH_TIME is not set
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+ CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+ #
+@@ -359,13 +390,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-@@ -521,7 +548,6 @@
+@@ -373,10 +410,6 @@ CONFIG_VLAN_8021Q=m
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+ CONFIG_NET_CLS_ROUTE=y
+
+@@ -384,6 +417,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+@@ -397,6 +431,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
#
- # Misc devices
+ # Device Drivers
+@@ -405,16 +440,13 @@ CONFIG_NET_CLS_ROUTE=y
#
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -434,6 +466,7 @@ CONFIG_MTD_BLOCK=y
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -493,20 +526,8 @@ CONFIG_MTD_DATAFLASH=y
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -517,11 +538,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
-# CONFIG_BLINK is not set
++# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
-@@ -545,13 +571,26 @@
+@@ -529,30 +546,42 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # CONFIG_RAID_ATTRS is not set
+ # CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
+ # CONFIG_SCSI_NETLINK is not set
+ # CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+ # CONFIG_MD is not set
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_PHYLIB is not set
+-
+-#
+-# Ethernet (10 or 100Mbit)
+-#
++# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
-
- #
- # Ethernet (10 or 100Mbit)
- #
++# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
CONFIG_MACB=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-@@ -625,7 +664,15 @@
- # IPMI
+
+@@ -571,21 +600,14 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ CONFIG_PPP_MPPE=m
+ CONFIG_PPPOE=m
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+ # CONFIG_PHONE is not set
+
#
+@@ -615,28 +637,57 @@ CONFIG_SLHC=m
+ #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-
+-#
+-# IPMI
+-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
-@@ -636,7 +683,42 @@
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
-+
-+#
+
+ #
+-# TPM devices
+# I2C Algorithms
-+#
+ #
+-# CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
#
# SPI support
-@@ -655,7 +737,7 @@
+@@ -655,13 +706,25 @@ CONFIG_SPI_ATMEL=y
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
+CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+ #
+-# Dallas's 1-wire bus
++# Watchdog Device Drivers
+ #
+-# CONFIG_W1 is not set
+-# CONFIG_HWMON is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
+ #
+ # Multifunction device drivers
+@@ -678,23 +741,21 @@ CONFIG_SPI_ATMEL=y
+ #
+ # Graphics support
+ #
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
+ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
#
- # Dallas's 1-wire bus
-@@ -706,21 +788,59 @@
+ # Sound
+ #
+ # CONFIG_SOUND is not set
+-
+-#
+-# USB support
+-#
++CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -706,12 +767,48 @@ CONFIG_SPI_ATMEL=y
#
# USB Gadget Support
#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+-
+-#
+-# LED devices
+-#
+CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
-
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=y
-
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
- #
- # InfiniBand support
-@@ -733,7 +853,51 @@
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
++CONFIG_MMC_SPI=m
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
+
+@@ -726,53 +823,71 @@ CONFIG_LEDS_GPIO=y
+ CONFIG_LEDS_TRIGGERS=y
+ CONFIG_LEDS_TRIGGER_TIMER=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+-
+-
+-#
+-# LED drivers
+-#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
-+
-+#
+
+ #
+-# LED Triggers
+-#
+-
+-#
+-# InfiniBand support
+# RTC interfaces
-+#
+ #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
+
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# I2C RTC drivers
-+#
+ #
+# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
++# CONFIG_RTC_DRV_M41T80 is not set
+
+ #
+-# Real Time Clock
+# SPI RTC drivers
-+#
+ #
+-# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
+
+ #
+-# DMA Engine support
+# Platform RTC drivers
-+#
+ #
+-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
+
+ #
+-# DMA Clients
+# on-CPU RTC drivers
-+#
+ #
+CONFIG_RTC_DRV_AT32AP700X=y
#
- # DMA Engine support
-@@ -767,7 +931,8 @@
+-# DMA Devices
++# Userspace I/O
+ #
++# CONFIG_UIO is not set
+
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS=m
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS=m
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-# CONFIG_JBD_DEBUG is not set
++CONFIG_JBD=m
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -781,7 +896,8 @@ CONFIG_JBD=y
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
-@@ -922,7 +1087,7 @@
+@@ -814,7 +930,6 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+ CONFIG_CONFIGFS_FS=y
+
+ #
+@@ -830,10 +945,12 @@ CONFIG_CONFIGFS_FS=y
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+ CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+@@ -842,19 +959,21 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ # CONFIG_NFS_V4 is not set
+ # CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_NFSD_TCP=y
+ CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ # CONFIG_SUNRPC_BIND34 is not set
+@@ -871,23 +990,18 @@ CONFIG_CIFS=m
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+-CONFIG_NLS=y
++CONFIG_NLS=m
+ CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
++CONFIG_NLS_CODEPAGE_437=m
+ # CONFIG_NLS_CODEPAGE_737 is not set
+ # CONFIG_NLS_CODEPAGE_775 is not set
+-CONFIG_NLS_CODEPAGE_850=y
++CONFIG_NLS_CODEPAGE_850=m
+ # CONFIG_NLS_CODEPAGE_852 is not set
+ # CONFIG_NLS_CODEPAGE_855 is not set
+ # CONFIG_NLS_CODEPAGE_857 is not set
+@@ -908,7 +1022,7 @@ CONFIG_NLS_CODEPAGE_850=y
+ # CONFIG_NLS_CODEPAGE_1250 is not set
+ # CONFIG_NLS_CODEPAGE_1251 is not set
+ # CONFIG_NLS_ASCII is not set
+-CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_ISO8859_2 is not set
+ # CONFIG_NLS_ISO8859_3 is not set
+ # CONFIG_NLS_ISO8859_4 is not set
+@@ -921,18 +1035,19 @@ CONFIG_NLS_ISO8859_1=y
+ # CONFIG_NLS_ISO8859_15 is not set
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+-CONFIG_NLS_UTF8=y
+-
+-#
+-# Distributed Lock Manager
+-#
++CONFIG_NLS_UTF8=m
+ # CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
+@@ -941,12 +1056,17 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig linux-avr32.git/arch/avr32/configs/atstk1002_defconfig
---- linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/configs/atstk1002_defconfig 2007-07-13 11:24:16.000000000 +0200
-@@ -1,7 +1,7 @@
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -954,21 +1074,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ # CONFIG_FORCED_INLINING is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_KPROBES is not set
++# CONFIG_SAMPLES is not set
+
+ #
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+ CONFIG_CRYPTO_ALGAPI=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+@@ -989,6 +1109,7 @@ CONFIG_CRYPTO_ECB=m
+ CONFIG_CRYPTO_CBC=y
+ CONFIG_CRYPTO_PCBC=m
+ # CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+ CONFIG_CRYPTO_DES=y
+ # CONFIG_CRYPTO_FCRYPT is not set
+@@ -1002,15 +1123,14 @@ CONFIG_CRYPTO_DES=y
+ CONFIG_CRYPTO_ARC4=m
+ # CONFIG_CRYPTO_KHAZAD is not set
+ # CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
+ CONFIG_CRYPTO_DEFLATE=y
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+ # CONFIG_CRYPTO_CRC32C is not set
+ # CONFIG_CRYPTO_CAMELLIA is not set
+ # CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Hardware crypto devices
+-#
++# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_HW=y
+
+ #
+ # Library routines
+@@ -1018,8 +1138,9 @@ CONFIG_CRYPTO_DEFLATE=y
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
+index 3b977fd..46e1c78 100644
+--- a/arch/avr32/configs/atstk1002_defconfig
++++ b/arch/avr32/configs/atstk1002_defconfig
+@@ -1,48 +1,48 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc5
-# Sat Jun 23 15:32:08 2007
-+# Linux kernel version: 2.6.22.atmel.1
-+# Thu Jul 12 19:34:17 2007
++# Linux kernel version: 2.6.24
++# Tue Feb 5 18:00:06 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
-@@ -80,10 +80,10 @@
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
#
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+-CONFIG_BSD_PROCESS_ACCT=y
+-CONFIG_BSD_PROCESS_ACCT_V3=y
+-CONFIG_TASKSTATS=y
+-CONFIG_TASK_DELAY_ACCT=y
+-# CONFIG_TASK_XACCT is not set
+-# CONFIG_UTS_NS is not set
+-CONFIG_AUDIT=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_RELAY=y
+ CONFIG_BLK_DEV_INITRD=y
+@@ -63,35 +63,28 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
--# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
--# CONFIG_KMOD is not set
-+CONFIG_KMOD=y
+ # CONFIG_KMOD is not set
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
#
- # Block layer
-@@ -99,12 +99,12 @@
+ # IO Schedulers
+@@ -99,12 +92,12 @@ CONFIG_BLOCK=y
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
#
# System Type and features
-@@ -117,6 +117,11 @@
- CONFIG_BOARD_ATSTK1002=y
+@@ -113,18 +106,30 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+-CONFIG_BOARD_ATSTK1002=y
CONFIG_BOARD_ATSTK1000=y
# CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK1002_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
++CONFIG_BOARD_ATSTK1002=y
++# CONFIG_BOARD_ATSTK1003 is not set
++# CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
CONFIG_LOADER_U_BOOT=y
#
-@@ -125,6 +130,7 @@
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
-@@ -148,6 +154,7 @@
+@@ -144,10 +149,14 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
-@@ -156,6 +163,27 @@
+@@ -156,13 +165,31 @@ CONFIG_HZ=250
CONFIG_CMDLINE=""
#
-+# Power managment options
-+#
-+
-+#
+-# Bus options
++# Power management options
+ #
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+ #
+-# PCCARD (PCMCIA/CardBus) support
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+ #
++# Bus options
+#
- # Bus options
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+
+ #
+@@ -182,7 +209,12 @@ CONFIG_NET=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+ # CONFIG_IP_ADVANCED_ROUTER is not set
+@@ -191,36 +223,52 @@ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+ # CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
+ # CONFIG_ARPD is not set
+ # CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -228,16 +276,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+
+ #
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+@@ -251,6 +296,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
#
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -327,6 +355,8 @@
+ # Device Drivers
+@@ -259,16 +305,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -288,6 +331,7 @@ CONFIG_MTD_BLOCK=y
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -327,6 +371,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
# Self-contained MTD device drivers
#
+CONFIG_MTD_DATAFLASH=m
-+# CONFIG_MTD_M25P80 is not set
++CONFIG_MTD_M25P80=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-@@ -373,7 +403,6 @@
- #
- # Misc devices
+@@ -345,20 +391,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ # UBI - Unsorted block images
#
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -369,42 +403,88 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
-# CONFIG_BLINK is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
# CONFIG_IDE is not set
#
-@@ -397,13 +426,26 @@
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
++# CONFIG_SCSI_PROC_FS is not set
+
+ #
+-# Multi-device support (RAID and LVM)
++# SCSI support type (disk, tape, CD-ROM)
+ #
+-# CONFIG_MD is not set
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+
+ #
+-# Network device support
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
+ #
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
+ CONFIG_NETDEVICES=y
+-CONFIG_DUMMY=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_PHYLIB is not set
+-
+-#
+-# Ethernet (10 or 100Mbit)
+-#
++# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
-+CONFIG_LXT_PHY=y
++# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
-
- #
- # Ethernet (10 or 100Mbit)
- #
++# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
CONFIG_MACB=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-@@ -443,7 +485,42 @@
+
+@@ -423,27 +503,54 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ # CONFIG_PPP_MPPE is not set
+ # CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
+
#
- # Input device support
+-# ISDN subsystem
++# Input device support
#
--# CONFIG_INPUT is not set
+-# CONFIG_ISDN is not set
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
-+
-+#
+
+ #
+-# Telephony Support
+# Userland interfaces
-+#
+ #
+-# CONFIG_PHONE is not set
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
++CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
-+
-+#
+
+ #
+-# Input device support
+# Input Device Drivers
-+#
+ #
+-# CONFIG_INPUT is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
#
# Hardware I/O ports
-@@ -477,7 +554,15 @@
- # IPMI
+@@ -467,40 +574,94 @@ CONFIG_SLHC=m
#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-
+-#
+-# IPMI
+-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
-@@ -488,13 +573,61 @@
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
-+
-+#
+
+ #
+-# TPM devices
+# I2C Algorithms
-+#
+ #
+-# CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
-+
-+#
+
+ #
+-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
-+#
+ #
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
+ # CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
#
- # Dallas's 1-wire bus
-@@ -517,14 +650,40 @@
+ # Multifunction device drivers
+@@ -517,23 +678,104 @@ CONFIG_UNIX98_PTYS=y
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
- #
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_VGASTATE is not set
--# CONFIG_FB is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
+# CONFIG_LOGO is not set
#
# Sound
-@@ -532,6 +691,11 @@
- # CONFIG_SOUND is not set
-
#
-+# HID Devices
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
+#
-+# CONFIG_HID is not set
++# CONFIG_SND_SOC is not set
+
+#
- # USB support
++# SoC Audio support for SuperH
++#
+
#
+-# USB support
++# Open Sound System
+ #
++CONFIG_SOUND_PRIME=m
++# CONFIG_SOUND_MSNDCLAS is not set
++# CONFIG_SOUND_MSNDPIN is not set
++CONFIG_SOUND_AT32_ABDAC=m
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
-@@ -545,21 +709,59 @@
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -545,63 +787,137 @@ CONFIG_UNIX98_PTYS=y
#
# USB Gadget Support
#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+-
+-#
+-# LED devices
+-#
+-# CONFIG_NEW_LEDS is not set
+CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
-
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
++CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
#
# LED drivers
#
++CONFIG_LEDS_ATMEL_PWM=m
+CONFIG_LEDS_GPIO=m
#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-
- #
- # InfiniBand support
-@@ -572,7 +774,50 @@
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
-+
-+#
+
+ #
+-# InfiniBand support
+# RTC interfaces
-+#
+ #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
+
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# I2C RTC drivers
-+#
+ #
+# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
++# CONFIG_RTC_DRV_M41T80 is not set
+
+ #
+-# Real Time Clock
+# SPI RTC drivers
-+#
+ #
+-# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
+
+ #
+-# DMA Engine support
+# Platform RTC drivers
-+#
+ #
+-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
+
+ #
+-# DMA Clients
+# on-CPU RTC drivers
-+#
+ #
+CONFIG_RTC_DRV_AT32AP700X=y
#
- # DMA Engine support
-@@ -590,11 +835,14 @@
+-# DMA Devices
++# Userspace I/O
+ #
++# CONFIG_UIO is not set
+
#
# File systems
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-@@ -609,7 +857,7 @@
+ # CONFIG_XFS_FS is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-CONFIG_MINIX_FS=m
++# CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+@@ -609,7 +925,7 @@ CONFIG_INOTIFY_USER=y
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
-@@ -638,7 +886,7 @@
+@@ -637,8 +953,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
+-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
+CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
-@@ -683,8 +931,14 @@
- # CONFIG_SUNRPC_BIND34 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
--# CONFIG_CIFS is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
+@@ -652,11 +967,12 @@ CONFIG_CONFIGFS_FS=m
+ # CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+@@ -665,10 +981,7 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+@@ -688,17 +1001,12 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c linux-avr32.git/arch/avr32/drivers/dw-dmac.c
---- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/drivers/dw-dmac.c 2007-07-13 11:24:16.000000000 +0200
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ CONFIG_NLS=m
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=m
+@@ -739,17 +1047,18 @@ CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
+-
+-#
+-# Distributed Lock Manager
+-#
+ # CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+@@ -758,12 +1067,17 @@ CONFIG_DEBUG_FS=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -771,22 +1085,63 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_KPROBES is not set
++# CONFIG_SAMPLES is not set
+
+ #
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
+-# CONFIG_CRYPTO is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_HW is not set
+
+ #
+ # Library routines
+@@ -794,10 +1149,10 @@ CONFIG_FORCED_INLINING=y
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+-CONFIG_AUDIT_GENERIC=y
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+ CONFIG_PLIST=y
+diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
+new file mode 100644
+index 0000000..d8a6595
+--- /dev/null
++++ b/arch/avr32/configs/atstk1003_defconfig
+@@ -0,0 +1,1032 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24
++# Tue Feb 5 18:08:36 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++# CONFIG_TASK_XACCT is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++CONFIG_AUDIT=y
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLUB_DEBUG is not set
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
-+#include "dw-dmac.h"
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7001=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++CONFIG_BOARD_ATSTK1003=y
++# CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++CONFIG_LOADER_U_BOOT=y
+
-+enum {
-+ CH_STATE_FREE = 0,
-+ CH_STATE_ALLOCATED,
-+ CH_STATE_BUSY,
-+};
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++CONFIG_DW_DMAC=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
+
-+struct dw_dma_lli {
-+ dma_addr_t sar;
-+ dma_addr_t dar;
-+ dma_addr_t llp;
-+ u32 ctllo;
-+ u32 ctlhi;
-+ u32 sstat;
-+ u32 dstat;
-+};
++#
++# Power management options
++#
+
-+struct dw_dma_block {
-+ struct dw_dma_lli *lli_vaddr;
-+ dma_addr_t lli_dma_addr;
-+};
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
+
-+struct dw_dma_channel {
-+ unsigned int state;
-+ int is_cyclic;
-+ struct dma_request_sg *req_sg;
-+ struct dma_request_cyclic *req_cyclic;
-+ unsigned int nr_blocks;
-+ int direction;
-+ struct dw_dma_block *block;
-+};
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
+
-+struct dw_dma_controller {
-+ spinlock_t lock;
-+ void * __iomem regs;
-+ struct dma_pool *lli_pool;
-+ struct clk *hclk;
-+ struct dma_controller dma;
-+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
+
-+#define dmac_writel_hi(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+ + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long flags;
-+ int i;
++#
++# Networking
++#
++CONFIG_NET=y
+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+ if (dmac->channel[i].state == CH_STATE_FREE)
-+ break;
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
+
-+ if (i < DMAC_NR_CHANNELS) {
-+ chan = &dmac->channel[i];
-+ chan->state = CH_STATE_ALLOCATED;
-+ } else {
-+ i = -EBUSY;
-+ }
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
+
-+ spin_unlock_irqrestore(&dmac->lock, flags);
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
-+ return i;
-+}
++#
++# Device Drivers
++#
+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
-+ dmac->channel[channel].state = CH_STATE_FREE;
-+}
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+ unsigned int nr_blocks)
-+{
-+ struct dw_dma_block *block;
-+ void *p;
-+ unsigned int i;
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
+
-+ block = kmalloc(nr_blocks * sizeof(*block),
-+ GFP_KERNEL);
-+ if (unlikely(!block))
-+ return NULL;
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
+
-+ for (i = 0; i < nr_blocks; i++) {
-+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+ &block[i].lli_dma_addr);
-+ block[i].lli_vaddr = p;
-+ if (unlikely(!p))
-+ goto fail;
-+ }
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
+
-+ return block;
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_IDE is not set
+
-+fail:
-+ for (i = 0; i < nr_blocks; i++) {
-+ if (!block[i].lli_vaddr)
-+ break;
-+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+ block[i].lli_dma_addr);
-+ }
-+ kfree(block);
-+ return NULL;
-+}
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+ struct dw_dma_channel *chan)
-+{
-+ unsigned int i;
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+
-+ if (chan->nr_blocks > 1) {
-+ for (i = 0; i < chan->nr_blocks; i++)
-+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+ chan->block[i].lli_dma_addr);
-+ kfree(chan->block);
-+ }
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+
-+ chan->state = CH_STATE_ALLOCATED;
-+}
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+ struct dma_request_sg *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+ int ret, i, direction;
-+ unsigned long flags;
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
+
-+ spin_lock_irqsave(&dmac->lock, flags);
++#
++# Input device support
++#
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->req_sg = req;
-+ chan->is_cyclic = 0;
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
+
-+ /*
-+ * There may be limitations in the driver and/or the DMA
-+ * controller that prevents us from sending a whole
-+ * scatterlist item in one go. Taking this into account,
-+ * calculate the number of block transfers we need to set up.
-+ *
-+ * FIXME: Let the peripheral driver know about the maximum
-+ * block size we support. We really don't want to use a
-+ * different block size than what was suggested by the
-+ * peripheral.
-+ *
-+ * Each block will get its own Linked List Item (LLI) below.
-+ */
-+ block_size = req->block_size;
-+ nr_blocks = req->nr_blocks;
-+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+ block_size, nr_blocks, req->nr_sg);
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
+
-+ BUG_ON(nr_blocks == 0);
-+ chan->nr_blocks = nr_blocks;
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
+
-+ chan->direction = direction;
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+
-+ ctlhi = block_size >> req->width;
-+ ctllo = ((req->direction << 20)
-+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+
-+ if (nr_blocks == 1) {
-+ /* Only one block: No need to use block chaining */
-+ if (direction == DMA_TO_DEVICE) {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->sg->dma_address);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->data_reg);
-+ ctllo |= 2 << 7; // no dst increment
-+ } else {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->data_reg);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->sg->dma_address);
-+ ctllo |= 2 << 9; // no src increment
-+ }
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+ } else {
-+ struct dw_dma_lli *lli, *lli_prev = NULL;
-+ int j = 0, offset = 0;
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, nr_blocks);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
+
-+ /*
-+ * Map scatterlist items to blocks. One scatterlist
-+ * item may need more than one block for the reasons
-+ * mentioned above.
-+ */
-+ for (i = 0; i < nr_blocks; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->sg[j].dma_address + offset;
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->sg[j].dma_address + offset;
-+ }
-+ lli_prev = lli;
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
-+ offset += block_size;
-+ if (offset > req->sg[j].length) {
-+ j++;
-+ offset = 0;
-+ }
-+ }
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
+
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
-+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
+
-+ return 0;
++#
++# Sound
++#
++CONFIG_SOUND=m
+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ int ret, i, direction;
-+ unsigned long flags;
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
+
-+ spin_lock_irqsave(&dmac->lock, flags);
++#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
+
-+ block_size = (req->buffer_size/req->periods) >> req->width;
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || (req->periods == 0)
-+ || block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->is_cyclic = 1;
-+ chan->req_cyclic = req;
++#
++# SoC Audio support for SuperH
++#
+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+
-+ /*
-+ Setup
-+ */
-+ BUG_ON(req->buffer_size % req->periods);
-+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
+
-+ chan->nr_blocks = req->periods;
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_DEBUG_FS=y
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++CONFIG_MMC_SPI=m
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
+
-+ chan->direction = direction;
++#
++# LED drivers
++#
++CONFIG_LEDS_ATMEL_PWM=m
++CONFIG_LEDS_GPIO=y
+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
-+ ctlhi = block_size;
-+ ctllo = ((req->direction << 20)
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
-+ {
-+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, req->periods);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+
-+ /*
-+ * Set up a linked list items where each period gets
-+ * an item. The linked list item for the last period
-+ * points back to the star of the buffer making a
-+ * cyclic buffer.
-+ */
-+ for (i = 0; i < req->periods; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);*/
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->buffer_start + i*(block_size << req->width);
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->buffer_start + i*(block_size << req->width);
-+ }
-+ lli_prev = lli;
-+ }
-+ lli->llp = chan->block[0].lli_dma_addr;
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
+
-+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi); */
++#
++# Userspace I/O
++#
++CONFIG_UIO=m
+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
++#
++# File systems
++#
++CONFIG_EXT2_FS=m
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=m
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=m
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
+
-+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
+
-+ return 0;
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+
-+ set_channel_bit(dmac, CH_EN, channel);
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
+
-+ return 0;
-+}
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ dma_addr_t current_pos;
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32=y
++CONFIG_CRC7=m
++# CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
+new file mode 100644
+index 0000000..559b065
+--- /dev/null
++++ b/arch/avr32/configs/atstk1004_defconfig
+@@ -0,0 +1,627 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24
++# Tue Feb 5 18:13:33 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SYSVIPC is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++# CONFIG_FUTEX is not set
++# CONFIG_EPOLL is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_EVENTFD is not set
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLAB is not set
++# CONFIG_SLUB is not set
++CONFIG_SLOB=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++# CONFIG_MODULES is not set
++# CONFIG_BLOCK is not set
+
-+ chan = &dmac->channel[channel];
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7002=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++# CONFIG_BOARD_ATSTK1003 is not set
++CONFIG_BOARD_ATSTK1004=y
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++CONFIG_LOADER_U_BOOT=y
+
-+ switch (chan->direction) {
-+ case DMA_TO_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+ break;
-+ default:
-+ return 0;
-+ }
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++# CONFIG_GPIO_DEV is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_NMI_DEBUGGING is not set
++# CONFIG_DW_DMAC is not set
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
+
++#
++# Power management options
++#
+
-+ if (!current_pos) {
-+ if (chan->is_cyclic) {
-+ current_pos = chan->req_cyclic->buffer_start;
-+ } else {
-+ current_pos = chan->req_sg->sg->dma_address;
-+ }
-+ }
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
+
-+ return current_pos;
-+}
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
+
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
++#
++# Networking
++#
++CONFIG_NET=y
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
+
-+ chan = &dmac->channel[channel];
-+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+ dmac_chan_readl_lo(dmac, channel, DAR),
-+ dmac_chan_readl_lo(dmac, channel, LLP),
-+ dmac_chan_readl_hi(dmac, channel, CTL),
-+ dmac_chan_readl_lo(dmac, channel, CTL));
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
+
-+ if (chan->state == CH_STATE_BUSY) {
-+ clear_channel_bit(dmac, CH_EN, channel);
-+ cleanup_channel(dmac, &dmac->channel[channel]);
-+ }
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
-+ return 0;
-+}
++#
++# Device Drivers
++#
+
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++# CONFIG_MTD_OOPS is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
+
-+ while (status) {
-+ struct dma_request *req;
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic
-+ || !chan->req_cyclic->req.block_complete);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+ req = &chan->req_sg->req;
-+ }
-+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+ req->block_complete(req);
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+ }
-+}
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ struct dma_request *req;
-+ unsigned long status, chanid;
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++# CONFIG_MISC_DEVICES is not set
+
-+ while (status) {
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
++#
++# SCSI device support
++#
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_NETDEVICES is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
+
-+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
+
-+ req = &chan->req_sg->req;
-+ BUG_ON(!req);
-+ cleanup_channel(dmac, chan);
-+ if (req->xfer_complete)
-+ req->xfer_complete(req);
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_ERROR);
-+
-+ while (status) {
-+ struct dma_request *req;
-+
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+ clear_channel_bit(dmac, CH_EN, chanid);
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg);
-+ req = &chan->req_sg->req;
-+ }
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
+
-+ cleanup_channel(dmac, chan);
-+ if (req->error)
-+ req->error(req);
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_PDC is not set
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+ struct dw_dma_controller *dmac = dev_id;
-+ unsigned long status;
-+ int ret = IRQ_NONE;
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+
-+ spin_lock(&dmac->lock);
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
+
-+ while (status) {
-+ ret = IRQ_HANDLED;
-+ if (status & 0x10)
-+ dmac_error(dmac);
-+ if (status & 0x02)
-+ dmac_block_complete(dmac);
-+ if (status & 0x01)
-+ dmac_xfer_complete(dmac);
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+ }
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
+
-+ spin_unlock(&dmac->lock);
-+ return ret;
-+}
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+ struct dw_dma_controller *dmac;
-+ struct resource *regs;
-+ int ret;
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
-+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+ if (!dmac)
-+ return -ENOMEM;
-+ memset(dmac, 0, sizeof(*dmac));
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_LOGO is not set
+
-+ dmac->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(dmac->hclk)) {
-+ ret = PTR_ERR(dmac->hclk);
-+ goto out_free_dmac;
-+ }
-+ clk_enable(dmac->hclk);
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+
-+ ret = -ENOMEM;
-+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+ sizeof(struct dw_dma_lli), 4, 0);
-+ if (!dmac->lli_pool)
-+ goto out_disable_clk;
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
+
-+ spin_lock_init(&dmac->lock);
-+ dmac->dma.dev = &pdev->dev;
-+ dmac->dma.alloc_channel = dmac_alloc_channel;
-+ dmac->dma.release_channel = dmac_release_channel;
-+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+ dmac->dma.start_request = dmac_start_request;
-+ dmac->dma.stop_request = dmac_stop_request;
-+ dmac->dma.get_current_pos = dmac_get_current_pos;
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++# CONFIG_USB_ETH_RNDIS is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
-+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dmac->regs)
-+ goto out_free_pool;
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++# CONFIG_RTC_INTF_PROC is not set
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
-+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
-+ if (ret)
-+ goto out_unmap_regs;
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+
-+ /* Enable the DMA controller */
-+ dmac_writel_lo(dmac, CFG, 1);
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+
-+ register_dma_controller(&dmac->dma);
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
+
-+ printk(KERN_INFO
-+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
+
-+ return 0;
++#
++# File systems
++#
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
+
-+out_unmap_regs:
-+ iounmap(dmac->regs);
-+out_free_pool:
-+ dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+ clk_disable(dmac->hclk);
-+ clk_put(dmac->hclk);
-+out_free_dmac:
-+ kfree(dmac);
-+ return ret;
-+}
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
+
-+static struct platform_driver dmac_driver = {
-+ .probe = dmac_probe,
-+ .driver = {
-+ .name = "dmaca",
-+ },
-+};
++#
++# Miscellaneous filesystems
++#
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++# CONFIG_INSTRUMENTATION is not set
+
-+static int __init dmac_init(void)
-+{
-+ return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
+
-+static void __exit dmac_exit(void)
-+{
-+ platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h linux-avr32.git/arch/avr32/drivers/dw-dmac.h
---- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/drivers/dw-dmac.h 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1,42 @@
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
+new file mode 100644
+index 0000000..b429b75
+--- /dev/null
++++ b/arch/avr32/drivers/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC) += dw-dmac.o
+diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
+new file mode 100644
+index 0000000..224eb30
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.c
+@@ -0,0 +1,761 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG 0x398
-+#define DW_DMAC_CH_EN 0x3a0
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
+
-+#define DW_DMAC_STATUS_XFER 0x2e8
-+#define DW_DMAC_STATUS_BLOCK 0x2f0
-+#define DW_DMAC_STATUS_ERROR 0x308
++#include <asm/dma-controller.h>
++#include <asm/io.h>
+
-+#define DW_DMAC_MASK_XFER 0x310
-+#define DW_DMAC_MASK_BLOCK 0x318
-+#define DW_DMAC_MASK_ERROR 0x330
++#include "dw-dmac.h"
+
-+#define DW_DMAC_CLEAR_XFER 0x338
-+#define DW_DMAC_CLEAR_BLOCK 0x340
-+#define DW_DMAC_CLEAR_ERROR 0x358
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
+
-+#define DW_DMAC_STATUS_INT 0x360
++enum {
++ CH_STATE_FREE = 0,
++ CH_STATE_ALLOCATED,
++ CH_STATE_BUSY,
++};
+
-+#define DW_DMAC_CHAN_SAR 0x000
-+#define DW_DMAC_CHAN_DAR 0x008
-+#define DW_DMAC_CHAN_LLP 0x010
-+#define DW_DMAC_CHAN_CTL 0x018
-+#define DW_DMAC_CHAN_SSTAT 0x020
-+#define DW_DMAC_CHAN_DSTAT 0x028
-+#define DW_DMAC_CHAN_SSTATAR 0x030
-+#define DW_DMAC_CHAN_DSTATAR 0x038
-+#define DW_DMAC_CHAN_CFG 0x040
-+#define DW_DMAC_CHAN_SGR 0x048
-+#define DW_DMAC_CHAN_DSR 0x050
++struct dw_dma_lli {
++ dma_addr_t sar;
++ dma_addr_t dar;
++ dma_addr_t llp;
++ u32 ctllo;
++ u32 ctlhi;
++ u32 sstat;
++ u32 dstat;
++};
+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/Makefile linux-avr32.git/arch/avr32/drivers/Makefile
---- linux-2.6.22.1/arch/avr32/drivers/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/drivers/Makefile 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/Kconfig linux-avr32.git/arch/avr32/Kconfig
---- linux-2.6.22.1/arch/avr32/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/Kconfig 2007-07-13 11:24:16.000000000 +0200
-@@ -113,6 +113,13 @@
- bool "ATNGW100 Network Gateway"
- endchoice
-
-+if BOARD_ATSTK1000
-+source "arch/avr32/boards/atstk1000/Kconfig"
-+endif
-+if BOARD_ATNGW100
-+source "arch/avr32/boards/atngw100/Kconfig"
-+endif
++struct dw_dma_block {
++ struct dw_dma_lli *lli_vaddr;
++ dma_addr_t lli_dma_addr;
++};
+
- choice
- prompt "Boot loader type"
- default LOADER_U_BOOT
-@@ -171,6 +178,10 @@
- enabling Nexus-compliant debuggers to keep track of the PID of the
- currently executing task.
-
-+config DW_DMAC
-+ tristate "Synopsys DesignWare DMA Controller support"
-+ default y if CPU_AT32AP7000
++struct dw_dma_channel {
++ unsigned int state;
++ int is_cyclic;
++ struct dma_request_sg *req_sg;
++ struct dma_request_cyclic *req_cyclic;
++ unsigned int nr_blocks;
++ int direction;
++ struct dw_dma_block *block;
++};
+
- # FPU emulation goes here
-
- source "kernel/Kconfig.hz"
-@@ -185,6 +196,27 @@
-
- endmenu
-
-+menu "Power managment options"
++struct dw_dma_controller {
++ spinlock_t lock;
++ void * __iomem regs;
++ struct dma_pool *lli_pool;
++ struct clk *hclk;
++ struct dma_controller dma;
++ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
+
-+menu "CPU Frequency scaling"
++#define dmac_writel_hi(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++ + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
+
-+source "drivers/cpufreq/Kconfig"
++static int dmac_alloc_channel(struct dma_controller *_dmac)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long flags;
++ int i;
+
-+config CPU_FREQ_AT32AP
-+ bool "CPU frequency driver for AT32AP"
-+ depends on CPU_FREQ && PLATFORM_AT32AP
-+ default n
-+ help
-+ This enables the CPU frequency driver for AT32AP processors.
++ spin_lock_irqsave(&dmac->lock, flags);
++ for (i = 0; i < DMAC_NR_CHANNELS; i++)
++ if (dmac->channel[i].state == CH_STATE_FREE)
++ break;
+
-+ For details, take a look in <file:Documentation/cpu-freq>.
++ if (i < DMAC_NR_CHANNELS) {
++ chan = &dmac->channel[i];
++ chan->state = CH_STATE_ALLOCATED;
++ } else {
++ i = -EBUSY;
++ }
+
-+ If in doubt, say N.
++ spin_unlock_irqrestore(&dmac->lock, flags);
+
-+endmenu
++ return i;
++}
+
-+endmenu
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+
- menu "Bus options"
-
- config PCI
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/kernel/dma-controller.c linux-avr32.git/arch/avr32/kernel/dma-controller.c
---- linux-2.6.22.1/arch/avr32/kernel/dma-controller.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/kernel/dma-controller.c 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
++ BUG_ON(channel >= DMAC_NR_CHANNELS
++ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
+
-+static LIST_HEAD(controllers);
++ dmac->channel[channel].state = CH_STATE_FREE;
++}
+
-+int register_dma_controller(struct dma_controller *dmac)
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++ unsigned int nr_blocks)
+{
-+ static int next_id;
++ struct dw_dma_block *block;
++ void *p;
++ unsigned int i;
+
-+ dmac->id = next_id++;
-+ list_add_tail(&dmac->list, &controllers);
++ block = kmalloc(nr_blocks * sizeof(*block),
++ GFP_KERNEL);
++ if (unlikely(!block))
++ return NULL;
+
-+ return 0;
++ for (i = 0; i < nr_blocks; i++) {
++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++ &block[i].lli_dma_addr);
++ block[i].lli_vaddr = p;
++ if (unlikely(!p))
++ goto fail;
++ }
++
++ return block;
++
++fail:
++ for (i = 0; i < nr_blocks; i++) {
++ if (!block[i].lli_vaddr)
++ break;
++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++ block[i].lli_dma_addr);
++ }
++ kfree(block);
++ return NULL;
+}
-+EXPORT_SYMBOL(register_dma_controller);
+
-+struct dma_controller *find_dma_controller(int id)
++static void cleanup_channel(struct dw_dma_controller *dmac,
++ struct dw_dma_channel *chan)
+{
-+ struct dma_controller *dmac;
++ unsigned int i;
+
-+ list_for_each_entry(dmac, &controllers, list)
-+ if (dmac->id == id)
-+ return dmac;
-+ return NULL;
++ if (chan->nr_blocks > 1) {
++ for (i = 0; i < chan->nr_blocks; i++)
++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++ chan->block[i].lli_dma_addr);
++ kfree(chan->block);
++ }
++
++ chan->state = CH_STATE_ALLOCATED;
+}
-+EXPORT_SYMBOL(find_dma_controller);
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/kernel/Makefile linux-avr32.git/arch/avr32/kernel/Makefile
---- linux-2.6.22.1/arch/avr32/kernel/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/kernel/Makefile 2007-06-06 11:33:46.000000000 +0200
-@@ -9,6 +9,7 @@
- obj-y += setup.o traps.o semaphore.o ptrace.o
- obj-y += signal.o sys_avr32.o process.o time.o
- obj-y += init_task.o switch_to.o cpu.o
-+obj-y += dma-controller.o
- obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES) += kprobes.o
-
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c linux-avr32.git/arch/avr32/mach-at32ap/at32ap7000.c
---- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/mach-at32ap/at32ap7000.c 2007-07-12 13:59:49.000000000 +0200
-@@ -17,14 +17,20 @@
- #include <asm/arch/at32ap7000.h>
- #include <asm/arch/board.h>
- #include <asm/arch/portmux.h>
--#include <asm/arch/sm.h>
-
- #include <video/atmel_lcdc.h>
-
- #include "clock.h"
- #include "hmatrix.h"
- #include "pio.h"
--#include "sm.h"
-+#include "pm.h"
+
-+/*
-+ * We can reduce the code size a bit by using a constant here. Since
-+ * this file is completely chip-specific, it's safe to not use
-+ * ioremap. Generic drivers should of course never do this.
-+ */
-+#define AT32_PM_BASE 0xfff00000
-
- #define PBMEM(base) \
- { \
-@@ -88,6 +94,8 @@
- .index = _index, \
- }
-
-+static DEFINE_SPINLOCK(pm_lock);
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++ struct dma_request_sg *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++ int ret, i, direction;
++ unsigned long flags;
+
- unsigned long at32ap7000_osc_rates[3] = {
- [0] = 32768,
- /* FIXME: these are ATSTK1002-specific */
-@@ -104,11 +112,11 @@
- {
- unsigned long div, mul, rate;
-
-- if (!(control & SM_BIT(PLLEN)))
-+ if (!(control & PM_BIT(PLLEN)))
- return 0;
-
-- div = SM_BFEXT(PLLDIV, control) + 1;
-- mul = SM_BFEXT(PLLMUL, control) + 1;
-+ div = PM_BFEXT(PLLDIV, control) + 1;
-+ mul = PM_BFEXT(PLLMUL, control) + 1;
-
- rate = clk->parent->get_rate(clk->parent);
- rate = (rate + div / 2) / div;
-@@ -121,7 +129,7 @@
- {
- u32 control;
-
-- control = sm_readl(&system_manager, PM_PLL0);
-+ control = pm_readl(PLL0);
-
- return pll_get_rate(clk, control);
- }
-@@ -130,7 +138,7 @@
- {
- u32 control;
-
-- control = sm_readl(&system_manager, PM_PLL1);
-+ control = pm_readl(PLL1);
-
- return pll_get_rate(clk, control);
- }
-@@ -187,108 +195,139 @@
-
- static void cpu_clk_mode(struct clk *clk, int enabled)
- {
-- struct at32_sm *sm = &system_manager;
- unsigned long flags;
- u32 mask;
-
-- spin_lock_irqsave(&sm->lock, flags);
-- mask = sm_readl(sm, PM_CPU_MASK);
-+ spin_lock_irqsave(&pm_lock, flags);
-+ mask = pm_readl(CPU_MASK);
- if (enabled)
- mask |= 1 << clk->index;
- else
- mask &= ~(1 << clk->index);
-- sm_writel(sm, PM_CPU_MASK, mask);
-- spin_unlock_irqrestore(&sm->lock, flags);
-+ pm_writel(CPU_MASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
- }
-
- static unsigned long cpu_clk_get_rate(struct clk *clk)
- {
- unsigned long cksel, shift = 0;
-
-- cksel = sm_readl(&system_manager, PM_CKSEL);
-- if (cksel & SM_BIT(CPUDIV))
-- shift = SM_BFEXT(CPUSEL, cksel) + 1;
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CPUDIV))
-+ shift = PM_BFEXT(CPUSEL, cksel) + 1;
-
- return bus_clk_get_rate(clk, shift);
- }
-
-+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ u32 control;
-+ unsigned long parent_rate, child_div, actual_rate, div;
-+
-+ parent_rate = clk->parent->get_rate(clk->parent);
-+ control = pm_readl(CKSEL);
-+
-+ if (control & PM_BIT(HSBDIV))
-+ child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
-+ else
-+ child_div = 1;
++ spin_lock_irqsave(&dmac->lock, flags);
+
-+ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-+ actual_rate = parent_rate;
-+ control &= ~PM_BIT(CPUDIV);
-+ } else {
-+ unsigned int cpusel;
-+ div = (parent_rate + rate / 2) / rate;
-+ if (div > child_div)
-+ div = child_div;
-+ cpusel = (div > 1) ? (fls(div) - 2) : 0;
-+ control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
-+ actual_rate = parent_rate / (1 << (cpusel + 1));
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || req->block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
+ }
+
-+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->req_sg = req;
++ chan->is_cyclic = 0;
+
-+ if (apply)
-+ pm_writel(CKSEL, control);
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
+
-+ return actual_rate;
-+}
++ /*
++ * There may be limitations in the driver and/or the DMA
++ * controller that prevents us from sending a whole
++ * scatterlist item in one go. Taking this into account,
++ * calculate the number of block transfers we need to set up.
++ *
++ * FIXME: Let the peripheral driver know about the maximum
++ * block size we support. We really don't want to use a
++ * different block size than what was suggested by the
++ * peripheral.
++ *
++ * Each block will get its own Linked List Item (LLI) below.
++ */
++ block_size = req->block_size;
++ nr_blocks = req->nr_blocks;
++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++ block_size, nr_blocks, req->nr_sg);
+
- static void hsb_clk_mode(struct clk *clk, int enabled)
- {
-- struct at32_sm *sm = &system_manager;
- unsigned long flags;
- u32 mask;
-
-- spin_lock_irqsave(&sm->lock, flags);
-- mask = sm_readl(sm, PM_HSB_MASK);
-+ spin_lock_irqsave(&pm_lock, flags);
-+ mask = pm_readl(HSB_MASK);
- if (enabled)
- mask |= 1 << clk->index;
- else
- mask &= ~(1 << clk->index);
-- sm_writel(sm, PM_HSB_MASK, mask);
-- spin_unlock_irqrestore(&sm->lock, flags);
-+ pm_writel(HSB_MASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
- }
-
- static unsigned long hsb_clk_get_rate(struct clk *clk)
- {
- unsigned long cksel, shift = 0;
-
-- cksel = sm_readl(&system_manager, PM_CKSEL);
-- if (cksel & SM_BIT(HSBDIV))
-- shift = SM_BFEXT(HSBSEL, cksel) + 1;
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(HSBDIV))
-+ shift = PM_BFEXT(HSBSEL, cksel) + 1;
-
- return bus_clk_get_rate(clk, shift);
- }
-
- static void pba_clk_mode(struct clk *clk, int enabled)
- {
-- struct at32_sm *sm = &system_manager;
- unsigned long flags;
- u32 mask;
-
-- spin_lock_irqsave(&sm->lock, flags);
-- mask = sm_readl(sm, PM_PBA_MASK);
-+ spin_lock_irqsave(&pm_lock, flags);
-+ mask = pm_readl(PBA_MASK);
- if (enabled)
- mask |= 1 << clk->index;
- else
- mask &= ~(1 << clk->index);
-- sm_writel(sm, PM_PBA_MASK, mask);
-- spin_unlock_irqrestore(&sm->lock, flags);
-+ pm_writel(PBA_MASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
- }
-
- static unsigned long pba_clk_get_rate(struct clk *clk)
- {
- unsigned long cksel, shift = 0;
-
-- cksel = sm_readl(&system_manager, PM_CKSEL);
-- if (cksel & SM_BIT(PBADIV))
-- shift = SM_BFEXT(PBASEL, cksel) + 1;
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(PBADIV))
-+ shift = PM_BFEXT(PBASEL, cksel) + 1;
-
- return bus_clk_get_rate(clk, shift);
- }
-
- static void pbb_clk_mode(struct clk *clk, int enabled)
- {
-- struct at32_sm *sm = &system_manager;
- unsigned long flags;
- u32 mask;
-
-- spin_lock_irqsave(&sm->lock, flags);
-- mask = sm_readl(sm, PM_PBB_MASK);
-+ spin_lock_irqsave(&pm_lock, flags);
-+ mask = pm_readl(PBB_MASK);
- if (enabled)
- mask |= 1 << clk->index;
- else
- mask &= ~(1 << clk->index);
-- sm_writel(sm, PM_PBB_MASK, mask);
-- spin_unlock_irqrestore(&sm->lock, flags);
-+ pm_writel(PBB_MASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
- }
-
- static unsigned long pbb_clk_get_rate(struct clk *clk)
- {
- unsigned long cksel, shift = 0;
-
-- cksel = sm_readl(&system_manager, PM_CKSEL);
-- if (cksel & SM_BIT(PBBDIV))
-- shift = SM_BFEXT(PBBSEL, cksel) + 1;
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(PBBDIV))
-+ shift = PM_BFEXT(PBBSEL, cksel) + 1;
-
- return bus_clk_get_rate(clk, shift);
- }
-@@ -296,6 +335,7 @@
- static struct clk cpu_clk = {
- .name = "cpu",
- .get_rate = cpu_clk_get_rate,
-+ .set_rate = cpu_clk_set_rate,
- .users = 1,
- };
- static struct clk hsb_clk = {
-@@ -327,12 +367,12 @@
- {
- u32 control;
-
-- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+ control = pm_readl(GCCTRL(clk->index));
- if (enabled)
-- control |= SM_BIT(CEN);
-+ control |= PM_BIT(CEN);
- else
-- control &= ~SM_BIT(CEN);
-- sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
-+ control &= ~PM_BIT(CEN);
-+ pm_writel(GCCTRL(clk->index), control);
- }
-
- static unsigned long genclk_get_rate(struct clk *clk)
-@@ -340,9 +380,9 @@
- u32 control;
- unsigned long div = 1;
-
-- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-- if (control & SM_BIT(DIVEN))
-- div = 2 * (SM_BFEXT(DIV, control) + 1);
-+ control = pm_readl(GCCTRL(clk->index));
-+ if (control & PM_BIT(DIVEN))
-+ div = 2 * (PM_BFEXT(DIV, control) + 1);
-
- return clk->parent->get_rate(clk->parent) / div;
- }
-@@ -353,23 +393,22 @@
- unsigned long parent_rate, actual_rate, div;
-
- parent_rate = clk->parent->get_rate(clk->parent);
-- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+ control = pm_readl(GCCTRL(clk->index));
-
- if (rate > 3 * parent_rate / 4) {
- actual_rate = parent_rate;
-- control &= ~SM_BIT(DIVEN);
-+ control &= ~PM_BIT(DIVEN);
- } else {
- div = (parent_rate + rate) / (2 * rate) - 1;
-- control = SM_BFINS(DIV, div, control) | SM_BIT(DIVEN);
-+ control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
- actual_rate = parent_rate / (2 * (div + 1));
- }
-
-- printk("clk %s: new rate %lu (actual rate %lu)\n",
-- clk->name, rate, actual_rate);
-+ dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
-
- if (apply)
-- sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index,
-- control);
-+ pm_writel(GCCTRL(clk->index), control);
-
- return actual_rate;
- }
-@@ -378,24 +417,24 @@
- {
- u32 control;
-
-- printk("clk %s: new parent %s (was %s)\n",
-- clk->name, parent->name, clk->parent->name);
-+ dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
-+ clk->name, parent->name, clk->parent->name);
-
-- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+ control = pm_readl(GCCTRL(clk->index));
-
- if (parent == &osc1 || parent == &pll1)
-- control |= SM_BIT(OSCSEL);
-+ control |= PM_BIT(OSCSEL);
- else if (parent == &osc0 || parent == &pll0)
-- control &= ~SM_BIT(OSCSEL);
-+ control &= ~PM_BIT(OSCSEL);
- else
- return -EINVAL;
-
- if (parent == &pll0 || parent == &pll1)
-- control |= SM_BIT(PLLSEL);
-+ control |= PM_BIT(PLLSEL);
- else
-- control &= ~SM_BIT(PLLSEL);
-+ control &= ~PM_BIT(PLLSEL);
-
-- sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
-+ pm_writel(GCCTRL(clk->index), control);
- clk->parent = parent;
-
- return 0;
-@@ -408,11 +447,11 @@
-
- BUG_ON(clk->index > 7);
-
-- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-- if (control & SM_BIT(OSCSEL))
-- parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
-+ control = pm_readl(GCCTRL(clk->index));
-+ if (control & PM_BIT(OSCSEL))
-+ parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
- else
-- parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
-+ parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
-
- clk->parent = parent;
- }
-@@ -420,21 +459,53 @@
- /* --------------------------------------------------------------------
- * System peripherals
- * -------------------------------------------------------------------- */
--static struct resource sm_resource[] = {
-- PBMEM(0xfff00000),
-- NAMED_IRQ(19, "eim"),
-- NAMED_IRQ(20, "pm"),
-- NAMED_IRQ(21, "rtc"),
-+static struct resource at32_pm0_resource[] = {
-+ {
-+ .start = 0xfff00000,
-+ .end = 0xfff0007f,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(20),
- };
--struct platform_device at32_sm_device = {
-- .name = "sm",
-- .id = 0,
-- .resource = sm_resource,
-- .num_resources = ARRAY_SIZE(sm_resource),
++ BUG_ON(nr_blocks == 0);
++ chan->nr_blocks = nr_blocks;
+
-+static struct resource at32ap700x_rtc0_resource[] = {
-+ {
-+ .start = 0xfff00080,
-+ .end = 0xfff000af,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(21),
-+};
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
+
-+static struct resource at32_wdt0_resource[] = {
-+ {
-+ .start = 0xfff000b0,
-+ .end = 0xfff000bf,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
+
-+static struct resource at32_eic0_resource[] = {
-+ {
-+ .start = 0xfff00100,
-+ .end = 0xfff0013f,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(19),
- };
--static struct clk at32_sm_pclk = {
++ chan->direction = direction;
+
-+DEFINE_DEV(at32_pm, 0);
-+DEFINE_DEV(at32ap700x_rtc, 0);
-+DEFINE_DEV(at32_wdt, 0);
-+DEFINE_DEV(at32_eic, 0);
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
+
-+/*
-+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
-+ * is always running.
++ ctlhi = block_size >> req->width;
++ ctllo = ((req->direction << 20)
++ // | (1 << 14) | (1 << 11) // source/dest burst trans len
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ if (nr_blocks == 1) {
++ /* Only one block: No need to use block chaining */
++ if (direction == DMA_TO_DEVICE) {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->sg->dma_address);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->data_reg);
++ ctllo |= 2 << 7; // no dst increment
++ } else {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->data_reg);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->sg->dma_address);
++ ctllo |= 2 << 9; // no src increment
++ }
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++ } else {
++ struct dw_dma_lli *lli, *lli_prev = NULL;
++ int j = 0, offset = 0;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, nr_blocks);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Map scatterlist items to blocks. One scatterlist
++ * item may need more than one block for the reasons
++ * mentioned above.
++ */
++ for (i = 0; i < nr_blocks; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->sg[j].dma_address + offset;
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->sg[j].dma_address + offset;
++ }
++ lli_prev = lli;
++
++ offset += block_size;
++ if (offset > req->sg[j].length) {
++ j++;
++ offset = 0;
++ }
++ }
++
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ set_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++ struct dma_request_cyclic *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ block_size = (req->buffer_size/req->periods) >> req->width;
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || (req->periods == 0)
++ || block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->is_cyclic = 1;
++ chan->req_cyclic = req;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ Setup
++ */
++ BUG_ON(req->buffer_size % req->periods);
++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++ chan->nr_blocks = req->periods;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size;
++ ctllo = ((req->direction << 20)
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ {
++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, req->periods);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Set up a linked list items where each period gets
++ * an item. The linked list item for the last period
++ * points back to the star of the buffer making a
++ * cyclic buffer.
++ */
++ for (i = 0; i < req->periods; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);*/
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->buffer_start + i*(block_size << req->width);
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->buffer_start + i*(block_size << req->width);
++ }
++ lli_prev = lli;
++ }
++ lli->llp = chan->block[0].lli_dma_addr;
++
++ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi); */
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ set_channel_bit(dmac, CH_EN, channel);
++
++ return 0;
++}
++
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ dma_addr_t current_pos;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++
++ switch (chan->direction) {
++ case DMA_TO_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++ break;
++ case DMA_FROM_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++ break;
++ default:
++ return 0;
++ }
++
++
++ if (!current_pos) {
++ if (chan->is_cyclic) {
++ current_pos = chan->req_cyclic->buffer_start;
++ } else {
++ current_pos = chan->req_sg->sg->dma_address;
++ }
++ }
++
++ return current_pos;
++}
++
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++ dmac_chan_readl_lo(dmac, channel, DAR),
++ dmac_chan_readl_lo(dmac, channel, LLP),
++ dmac_chan_readl_hi(dmac, channel, CTL),
++ dmac_chan_readl_lo(dmac, channel, CTL));
++
++ if (chan->state == CH_STATE_BUSY) {
++ clear_channel_bit(dmac, CH_EN, channel);
++ cleanup_channel(dmac, &dmac->channel[channel]);
++ }
++
++ return 0;
++}
++
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++ while (status) {
++ struct dma_request *req;
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic
++ || !chan->req_cyclic->req.block_complete);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++ req = &chan->req_sg->req;
++ }
++ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++ req->block_complete(req);
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++ }
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ struct dma_request *req;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++
++ while (status) {
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++ req = &chan->req_sg->req;
++ BUG_ON(!req);
++ cleanup_channel(dmac, chan);
++ if (req->xfer_complete)
++ req->xfer_complete(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++ while (status) {
++ struct dma_request *req;
++
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++ clear_channel_bit(dmac, CH_EN, chanid);
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg);
++ req = &chan->req_sg->req;
++ }
++
++ cleanup_channel(dmac, chan);
++ if (req->error)
++ req->error(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++ struct dw_dma_controller *dmac = dev_id;
++ unsigned long status;
++ int ret = IRQ_NONE;
++
++ spin_lock(&dmac->lock);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++
++ while (status) {
++ ret = IRQ_HANDLED;
++ if (status & 0x10)
++ dmac_error(dmac);
++ if (status & 0x02)
++ dmac_block_complete(dmac);
++ if (status & 0x01)
++ dmac_xfer_complete(dmac);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++ }
++
++ spin_unlock(&dmac->lock);
++ return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++ struct dw_dma_controller *dmac;
++ struct resource *regs;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++ if (!dmac)
++ return -ENOMEM;
++ memset(dmac, 0, sizeof(*dmac));
++
++ dmac->hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(dmac->hclk)) {
++ ret = PTR_ERR(dmac->hclk);
++ goto out_free_dmac;
++ }
++ clk_enable(dmac->hclk);
++
++ ret = -ENOMEM;
++ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++ sizeof(struct dw_dma_lli), 4, 0);
++ if (!dmac->lli_pool)
++ goto out_disable_clk;
++
++ spin_lock_init(&dmac->lock);
++ dmac->dma.dev = &pdev->dev;
++ dmac->dma.alloc_channel = dmac_alloc_channel;
++ dmac->dma.release_channel = dmac_release_channel;
++ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++ dmac->dma.start_request = dmac_start_request;
++ dmac->dma.stop_request = dmac_stop_request;
++ dmac->dma.get_current_pos = dmac_get_current_pos;
++
++ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dmac->regs)
++ goto out_free_pool;
++
++ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* Enable the DMA controller */
++ dmac_writel_lo(dmac, CFG, 1);
++
++ register_dma_controller(&dmac->dma);
++
++ printk(KERN_INFO
++ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
++ return 0;
++
++out_unmap_regs:
++ iounmap(dmac->regs);
++out_free_pool:
++ dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++ clk_disable(dmac->hclk);
++ clk_put(dmac->hclk);
++out_free_dmac:
++ kfree(dmac);
++ return ret;
++}
++
++static struct platform_driver dmac_driver = {
++ .probe = dmac_probe,
++ .driver = {
++ .name = "dmaca",
++ },
++};
++
++static int __init dmac_init(void)
++{
++ return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
++
++static void __exit dmac_exit(void)
++{
++ platform_driver_unregister(&dmac_driver);
++}
++module_exit(dmac_exit);
++
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
+new file mode 100644
+index 0000000..1f67921
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.h
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG 0x398
++#define DW_DMAC_CH_EN 0x3a0
++
++#define DW_DMAC_STATUS_XFER 0x2e8
++#define DW_DMAC_STATUS_BLOCK 0x2f0
++#define DW_DMAC_STATUS_ERROR 0x308
++
++#define DW_DMAC_MASK_XFER 0x310
++#define DW_DMAC_MASK_BLOCK 0x318
++#define DW_DMAC_MASK_ERROR 0x330
++
++#define DW_DMAC_CLEAR_XFER 0x338
++#define DW_DMAC_CLEAR_BLOCK 0x340
++#define DW_DMAC_CLEAR_ERROR 0x358
++
++#define DW_DMAC_STATUS_INT 0x360
++
++#define DW_DMAC_CHAN_SAR 0x000
++#define DW_DMAC_CHAN_DAR 0x008
++#define DW_DMAC_CHAN_LLP 0x010
++#define DW_DMAC_CHAN_CTL 0x018
++#define DW_DMAC_CHAN_SSTAT 0x020
++#define DW_DMAC_CHAN_DSTAT 0x028
++#define DW_DMAC_CHAN_SSTATAR 0x030
++#define DW_DMAC_CHAN_DSTATAR 0x038
++#define DW_DMAC_CHAN_CFG 0x040
++#define DW_DMAC_CHAN_SGR 0x048
++#define DW_DMAC_CHAN_DSR 0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
+index 2d6d48f..88226b6 100644
+--- a/arch/avr32/kernel/Makefile
++++ b/arch/avr32/kernel/Makefile
+@@ -6,9 +6,11 @@ extra-y := head.o vmlinux.lds
+
+ obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o
+ obj-y += syscall_table.o syscall-stubs.o irq.o
+-obj-y += setup.o traps.o semaphore.o ptrace.o
++obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
+ obj-y += signal.o sys_avr32.o process.o time.o
+ obj-y += init_task.o switch_to.o cpu.o
++obj-y += dma-controller.o
+ obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES) += kprobes.o
+ obj-$(CONFIG_STACKTRACE) += stacktrace.o
++obj-$(CONFIG_NMI_DEBUGGING) += nmi_debug.o
+diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
+index 2714cf6..b8409ca 100644
+--- a/arch/avr32/kernel/cpu.c
++++ b/arch/avr32/kernel/cpu.c
+@@ -13,6 +13,7 @@
+ #include <linux/percpu.h>
+ #include <linux/param.h>
+ #include <linux/errno.h>
++#include <linux/clk.h>
+
+ #include <asm/setup.h>
+ #include <asm/sysreg.h>
+@@ -187,9 +188,20 @@ static int __init topology_init(void)
+
+ subsys_initcall(topology_init);
+
++struct chip_id_map {
++ u16 mid;
++ u16 pn;
++ const char *name;
++};
++
++static const struct chip_id_map chip_names[] = {
++ { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
++};
++#define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
++
+ static const char *cpu_names[] = {
+ "Morgan",
+- "AP7000",
++ "AP7",
+ };
+ #define NR_CPU_NAMES ARRAY_SIZE(cpu_names)
+
+@@ -206,12 +218,32 @@ static const char *mmu_types[] = {
+ "MPU"
+ };
+
++static const char *cpu_feature_flags[] = {
++ "rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu",
++};
++
++static const char *get_chip_name(struct avr32_cpuinfo *cpu)
++{
++ unsigned int i;
++ unsigned int mid = avr32_get_manufacturer_id(cpu);
++ unsigned int pn = avr32_get_product_number(cpu);
++
++ for (i = 0; i < NR_CHIP_NAMES; i++) {
++ if (chip_names[i].mid == mid && chip_names[i].pn == pn)
++ return chip_names[i].name;
++ }
++
++ return "(unknown)";
++}
++
+ void __init setup_processor(void)
+ {
+ unsigned long config0, config1;
+ unsigned long features;
+ unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
++ unsigned device_id;
+ unsigned tmp;
++ unsigned i;
+
+ config0 = sysreg_read(CONFIG0);
+ config1 = sysreg_read(CONFIG1);
+@@ -221,11 +253,14 @@ void __init setup_processor(void)
+ arch_rev = SYSREG_BFEXT(AR, config0);
+ mmu_type = SYSREG_BFEXT(MMUT, config0);
+
++ device_id = ocd_read(DID);
++
+ boot_cpu_data.arch_type = arch_id;
+ boot_cpu_data.cpu_type = cpu_id;
+ boot_cpu_data.arch_revision = arch_rev;
+ boot_cpu_data.cpu_revision = cpu_rev;
+ boot_cpu_data.tlb_config = mmu_type;
++ boot_cpu_data.device_id = device_id;
+
+ tmp = SYSREG_BFEXT(ILSZ, config1);
+ if (tmp) {
+@@ -247,41 +282,34 @@ void __init setup_processor(void)
+ return;
+ }
+
+- printk ("CPU: %s [%02x] revision %d (%s revision %d)\n",
++ printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data),
++ avr32_get_chip_revision(&boot_cpu_data) + 'A');
++ printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n",
+ cpu_names[cpu_id], cpu_id, cpu_rev,
+ arch_names[arch_id], arch_rev);
+ printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
+
+ printk ("CPU: features:");
+ features = 0;
+- if (config0 & SYSREG_BIT(CONFIG0_R)) {
++ if (config0 & SYSREG_BIT(CONFIG0_R))
+ features |= AVR32_FEATURE_RMW;
+- printk(" rmw");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_D)) {
++ if (config0 & SYSREG_BIT(CONFIG0_D))
+ features |= AVR32_FEATURE_DSP;
+- printk(" dsp");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_S)) {
++ if (config0 & SYSREG_BIT(CONFIG0_S))
+ features |= AVR32_FEATURE_SIMD;
+- printk(" simd");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_O)) {
++ if (config0 & SYSREG_BIT(CONFIG0_O))
+ features |= AVR32_FEATURE_OCD;
+- printk(" ocd");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_P)) {
++ if (config0 & SYSREG_BIT(CONFIG0_P))
+ features |= AVR32_FEATURE_PCTR;
+- printk(" perfctr");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_J)) {
++ if (config0 & SYSREG_BIT(CONFIG0_J))
+ features |= AVR32_FEATURE_JAVA;
+- printk(" java");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_F)) {
++ if (config0 & SYSREG_BIT(CONFIG0_F))
+ features |= AVR32_FEATURE_FPU;
+- printk(" fpu");
+- }
++
++ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
++ if (features & (1 << i))
++ printk(" %s", cpu_feature_flags[i]);
++
+ printk("\n");
+ boot_cpu_data.features = features;
+ }
+@@ -291,6 +319,8 @@ static int c_show(struct seq_file *m, void *v)
+ {
+ unsigned int icache_size, dcache_size;
+ unsigned int cpu = smp_processor_id();
++ unsigned int freq;
++ unsigned int i;
+
+ icache_size = boot_cpu_data.icache.ways *
+ boot_cpu_data.icache.sets *
+@@ -301,15 +331,21 @@ static int c_show(struct seq_file *m, void *v)
+
+ seq_printf(m, "processor\t: %d\n", cpu);
+
++ seq_printf(m, "chip type\t: %s revision %c\n",
++ get_chip_name(&boot_cpu_data),
++ avr32_get_chip_revision(&boot_cpu_data) + 'A');
+ if (boot_cpu_data.arch_type < NR_ARCH_NAMES)
+- seq_printf(m, "cpu family\t: %s revision %d\n",
++ seq_printf(m, "cpu arch\t: %s revision %d\n",
+ arch_names[boot_cpu_data.arch_type],
+ boot_cpu_data.arch_revision);
+ if (boot_cpu_data.cpu_type < NR_CPU_NAMES)
+- seq_printf(m, "cpu type\t: %s revision %d\n",
++ seq_printf(m, "cpu core\t: %s revision %d\n",
+ cpu_names[boot_cpu_data.cpu_type],
+ boot_cpu_data.cpu_revision);
+
++ freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000;
++ seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000);
++
+ seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n",
+ icache_size >> 10,
+ boot_cpu_data.icache.ways,
+@@ -320,7 +356,13 @@ static int c_show(struct seq_file *m, void *v)
+ boot_cpu_data.dcache.ways,
+ boot_cpu_data.dcache.sets,
+ boot_cpu_data.dcache.linesz);
+- seq_printf(m, "bogomips\t: %lu.%02lu\n",
++
++ seq_printf(m, "features\t:");
++ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
++ if (boot_cpu_data.features & (1 << i))
++ seq_printf(m, " %s", cpu_feature_flags[i]);
++
++ seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
+ boot_cpu_data.loops_per_jiffy / (500000/HZ),
+ (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100);
+
+@@ -343,7 +385,7 @@ static void c_stop(struct seq_file *m, void *v)
+
+ }
+
+-struct seq_operations cpuinfo_op = {
++const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
+new file mode 100644
+index 0000000..fb654b3
+--- /dev/null
++++ b/arch/avr32/kernel/dma-controller.c
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++ static int next_id;
++
++ dmac->id = next_id++;
++ list_add_tail(&dmac->list, &controllers);
++
++ return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++ struct dma_controller *dmac;
++
++ list_for_each_entry(dmac, &controllers, list)
++ if (dmac->id == id)
++ return dmac;
++ return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
+index 61f2de2..a8e767d 100644
+--- a/arch/avr32/kernel/irq.c
++++ b/arch/avr32/kernel/irq.c
+@@ -25,6 +25,17 @@ void ack_bad_irq(unsigned int irq)
+ printk("unexpected IRQ %u\n", irq);
+ }
+
++/* May be overridden by platform code */
++int __weak nmi_enable(void)
++{
++ return -ENOSYS;
++}
++
++void __weak nmi_disable(void)
++{
++
++}
++
+ #ifdef CONFIG_PROC_FS
+ int show_interrupts(struct seq_file *p, void *v)
+ {
+diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c
+index 799ba89..f820e9f 100644
+--- a/arch/avr32/kernel/kprobes.c
++++ b/arch/avr32/kernel/kprobes.c
+@@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
+ void __kprobes arch_arm_kprobe(struct kprobe *p)
+ {
+ pr_debug("arming kprobe at %p\n", p->addr);
++ ocd_enable(NULL);
+ *p->addr = BREAKPOINT_INSTRUCTION;
+ flush_icache_range((unsigned long)p->addr,
+ (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+@@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
+ void __kprobes arch_disarm_kprobe(struct kprobe *p)
+ {
+ pr_debug("disarming kprobe at %p\n", p->addr);
++ ocd_disable(NULL);
+ *p->addr = p->opcode;
+ flush_icache_range((unsigned long)p->addr,
+ (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+@@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+
+ int __init arch_init_kprobes(void)
+ {
+- printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
+- ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
+-
+ /* TODO: Register kretprobe trampoline */
+ return 0;
+ }
+diff --git a/arch/avr32/kernel/nmi_debug.c b/arch/avr32/kernel/nmi_debug.c
+new file mode 100644
+index 0000000..3414b85
+--- /dev/null
++++ b/arch/avr32/kernel/nmi_debug.c
+@@ -0,0 +1,82 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/delay.h>
++#include <linux/kdebug.h>
++#include <linux/notifier.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++
++enum nmi_action {
++ NMI_SHOW_STATE = 1 << 0,
++ NMI_SHOW_REGS = 1 << 1,
++ NMI_DIE = 1 << 2,
++ NMI_DEBOUNCE = 1 << 3,
++};
++
++static unsigned long nmi_actions;
++
++static int nmi_debug_notify(struct notifier_block *self,
++ unsigned long val, void *data)
++{
++ struct die_args *args = data;
++
++ if (likely(val != DIE_NMI))
++ return NOTIFY_DONE;
++
++ if (nmi_actions & NMI_SHOW_STATE)
++ show_state();
++ if (nmi_actions & NMI_SHOW_REGS)
++ show_regs(args->regs);
++ if (nmi_actions & NMI_DEBOUNCE)
++ mdelay(10);
++ if (nmi_actions & NMI_DIE)
++ return NOTIFY_BAD;
++
++ return NOTIFY_OK;
++}
++
++static struct notifier_block nmi_debug_nb = {
++ .notifier_call = nmi_debug_notify,
++};
++
++static int __init nmi_debug_setup(char *str)
++{
++ char *p, *sep;
++
++ register_die_notifier(&nmi_debug_nb);
++ if (nmi_enable()) {
++ printk(KERN_WARNING "Unable to enable NMI.\n");
++ return 0;
++ }
++
++ if (*str != '=')
++ return 0;
++
++ for (p = str + 1; *p; p = sep + 1) {
++ sep = strchr(p, ',');
++ if (sep)
++ *sep = 0;
++ if (strcmp(p, "state") == 0)
++ nmi_actions |= NMI_SHOW_STATE;
++ else if (strcmp(p, "regs") == 0)
++ nmi_actions |= NMI_SHOW_REGS;
++ else if (strcmp(p, "debounce") == 0)
++ nmi_actions |= NMI_DEBOUNCE;
++ else if (strcmp(p, "die") == 0)
++ nmi_actions |= NMI_DIE;
++ else
++ printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
++ p);
++ if (!sep)
++ break;
++ }
++
++ return 0;
++}
++__setup("nmi_debug", nmi_debug_setup);
+diff --git a/arch/avr32/kernel/ocd.c b/arch/avr32/kernel/ocd.c
+new file mode 100644
+index 0000000..c4f0232
+--- /dev/null
++++ b/arch/avr32/kernel/ocd.c
+@@ -0,0 +1,163 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++
++#include <asm/ocd.h>
++
++static long ocd_count;
++static spinlock_t ocd_lock;
++
++/**
++ * ocd_enable - enable on-chip debugging
++ * @child: task to be debugged
++ *
++ * If @child is non-NULL, ocd_enable() first checks if debugging has
++ * already been enabled for @child, and if it has, does nothing.
++ *
++ * If @child is NULL (e.g. when debugging the kernel), or debugging
++ * has not already been enabled for it, ocd_enable() increments the
++ * reference count and enables the debugging hardware.
++ */
++void ocd_enable(struct task_struct *child)
++{
++ u32 dc;
++
++ if (child)
++ pr_debug("ocd_enable: child=%s [%u]\n",
++ child->comm, child->pid);
++ else
++ pr_debug("ocd_enable (no child)\n");
++
++ if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) {
++ spin_lock(&ocd_lock);
++ ocd_count++;
++ dc = ocd_read(DC);
++ dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT);
++ ocd_write(DC, dc);
++ spin_unlock(&ocd_lock);
++ }
++}
++
++/**
++ * ocd_disable - disable on-chip debugging
++ * @child: task that was being debugged, but isn't anymore
++ *
++ * If @child is non-NULL, ocd_disable() checks if debugging is enabled
++ * for @child, and if it isn't, does nothing.
++ *
++ * If @child is NULL (e.g. when debugging the kernel), or debugging is
++ * enabled, ocd_disable() decrements the reference count, and if it
++ * reaches zero, disables the debugging hardware.
++ */
++void ocd_disable(struct task_struct *child)
++{
++ u32 dc;
++
++ if (!child)
++ pr_debug("ocd_disable (no child)\n");
++ else if (test_tsk_thread_flag(child, TIF_DEBUG))
++ pr_debug("ocd_disable: child=%s [%u]\n",
++ child->comm, child->pid);
++
++ if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) {
++ spin_lock(&ocd_lock);
++ ocd_count--;
++
++ WARN_ON(ocd_count < 0);
++
++ if (ocd_count <= 0) {
++ dc = ocd_read(DC);
++ dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
++ ocd_write(DC, dc);
++ }
++ spin_unlock(&ocd_lock);
++ }
++}
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++#include <linux/module.h>
++
++static struct dentry *ocd_debugfs_root;
++static struct dentry *ocd_debugfs_DC;
++static struct dentry *ocd_debugfs_DS;
++static struct dentry *ocd_debugfs_count;
++
++static u64 ocd_DC_get(void *data)
++{
++ return ocd_read(DC);
++}
++static void ocd_DC_set(void *data, u64 val)
++{
++ ocd_write(DC, val);
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
++
++static u64 ocd_DS_get(void *data)
++{
++ return ocd_read(DS);
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
++
++static u64 ocd_count_get(void *data)
++{
++ return ocd_count;
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
++
++static void ocd_debugfs_init(void)
++{
++ struct dentry *root;
++
++ root = debugfs_create_dir("ocd", NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ ocd_debugfs_root = root;
++
++ ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR,
++ root, NULL, &fops_DC);
++ if (!ocd_debugfs_DC)
++ goto err_DC;
++
++ ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root,
++ NULL, &fops_DS);
++ if (!ocd_debugfs_DS)
++ goto err_DS;
++
++ ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root,
++ NULL, &fops_count);
++ if (!ocd_debugfs_count)
++ goto err_count;
++
++ return;
++
++err_count:
++ debugfs_remove(ocd_debugfs_DS);
++err_DS:
++ debugfs_remove(ocd_debugfs_DC);
++err_DC:
++ debugfs_remove(ocd_debugfs_root);
++err_root:
++ printk(KERN_WARNING "OCD: Failed to create debugfs entries\n");
++}
++#else
++static inline void ocd_debugfs_init(void)
++{
++
++}
++#endif
++
++static int __init ocd_init(void)
++{
++ spin_lock_init(&ocd_lock);
++ ocd_debugfs_init();
++ return 0;
++}
++arch_initcall(ocd_init);
+diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
+index 9d6dac8..eaaa69b 100644
+--- a/arch/avr32/kernel/process.c
++++ b/arch/avr32/kernel/process.c
+@@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread);
+ */
+ void exit_thread(void)
+ {
+- /* nothing to do */
++ ocd_disable(current);
+ }
+
+ void flush_thread(void)
+@@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+ p->thread.cpu_context.ksp = (unsigned long)childregs;
+ p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
+
++ if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
++ ocd_enable(p);
++
+ return 0;
+ }
+
+diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
+index 002369e..1fed38f 100644
+--- a/arch/avr32/kernel/ptrace.c
++++ b/arch/avr32/kernel/ptrace.c
+@@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct *child)
+ {
+ clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
+ clear_tsk_thread_flag(child, TIF_BREAKPOINT);
++ ocd_disable(child);
+ }
+
+ /*
+@@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+ {
+ int ret;
+
+- pr_debug("ptrace: Enabling monitor mode...\n");
+- ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
+- | (1 << OCD_DC_DBE_BIT));
+-
+ switch (request) {
+ /* Read the word at location addr in the child process */
+ case PTRACE_PEEKTEXT:
+diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
+index 4b4c188..488078d 100644
+--- a/arch/avr32/kernel/setup.c
++++ b/arch/avr32/kernel/setup.c
+@@ -273,6 +273,8 @@ static int __init early_parse_fbmem(char *p)
+ printk(KERN_WARNING
+ "Failed to allocate framebuffer memory\n");
+ fbmem_size = 0;
++ } else {
++ memset(__va(fbmem_start), 0, fbmem_size);
+ }
+ }
+
+diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
+index 0ec1485..5616a00 100644
+--- a/arch/avr32/kernel/signal.c
++++ b/arch/avr32/kernel/signal.c
+@@ -270,19 +270,12 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall)
+ if (!user_mode(regs))
+ return 0;
+
+- if (try_to_freeze()) {
+- signr = 0;
+- if (!signal_pending(current))
+- goto no_signal;
+- }
+-
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else if (!oldset)
+ oldset = ¤t->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+-no_signal:
+ if (syscall) {
+ switch (regs->r12) {
+ case -ERESTART_RESTARTBLOCK:
+diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
+index 870c075..cf6f686 100644
+--- a/arch/avr32/kernel/traps.c
++++ b/arch/avr32/kernel/traps.c
+@@ -9,6 +9,7 @@
+ #include <linux/bug.h>
+ #include <linux/init.h>
+ #include <linux/kallsyms.h>
++#include <linux/kdebug.h>
+ #include <linux/module.h>
+ #include <linux/notifier.h>
+ #include <linux/sched.h>
+@@ -107,9 +108,23 @@ void _exception(long signr, struct pt_regs *regs, int code,
+
+ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
+ {
+- printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
+- show_regs_log_lvl(regs, KERN_ALERT);
+- show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
++ int ret;
++
++ nmi_enter();
++
++ ret = notify_die(DIE_NMI, "NMI", regs, 0, ecr, SIGINT);
++ switch (ret) {
++ case NOTIFY_OK:
++ case NOTIFY_STOP:
++ return;
++ case NOTIFY_BAD:
++ die("Fatal Non-Maskable Interrupt", regs, SIGINT);
++ default:
++ break;
++ }
++
++ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
++ nmi_disable();
+ }
+
+ asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
+diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
+index eb30783..0eb590a 100644
+--- a/arch/avr32/mach-at32ap/Kconfig
++++ b/arch/avr32/mach-at32ap/Kconfig
+@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
+ menu "Atmel AVR32 AP options"
+
+ choice
+- prompt "AT32AP7000 static memory bus width"
+- depends on CPU_AT32AP7000
+- default AP7000_16_BIT_SMC
++ prompt "AT32AP700x static memory bus width"
++ depends on CPU_AT32AP700X
++ default AP700X_16_BIT_SMC
+ help
+ Define the width of the AP7000 external static memory interface.
+ This is used to determine how to mangle the address and/or data
+@@ -15,17 +15,24 @@ choice
+ width for all chip selects, excluding the flash (which is using
+ raw access and is thus not affected by any of this.)
+
+-config AP7000_32_BIT_SMC
++config AP700X_32_BIT_SMC
+ bool "32 bit"
+
+-config AP7000_16_BIT_SMC
++config AP700X_16_BIT_SMC
+ bool "16 bit"
+
+-config AP7000_8_BIT_SMC
++config AP700X_8_BIT_SMC
+ bool "8 bit"
+
+ endchoice
+
++config GPIO_DEV
++ bool "GPIO /dev interface"
++ select CONFIGFS_FS
++ default n
++ help
++ Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+
+ endif # PLATFORM_AT32AP
+diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
+index a8b4450..0f6162e 100644
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,4 +1,5 @@
+ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+-obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
+-obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
++obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
++obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
++obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
+diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
+deleted file mode 100644
+index 7c4388f..0000000
+--- a/arch/avr32/mach-at32ap/at32ap7000.c
++++ /dev/null
+@@ -1,1730 +0,0 @@
+-/*
+- * Copyright (C) 2005-2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#include <linux/clk.h>
+-#include <linux/fb.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/spi/spi.h>
+-
+-#include <asm/io.h>
+-
+-#include <asm/arch/at32ap7000.h>
+-#include <asm/arch/board.h>
+-#include <asm/arch/portmux.h>
+-
+-#include <video/atmel_lcdc.h>
+-
+-#include "clock.h"
+-#include "hmatrix.h"
+-#include "pio.h"
+-#include "pm.h"
+-
+-
+-#define PBMEM(base) \
+- { \
+- .start = base, \
+- .end = base + 0x3ff, \
+- .flags = IORESOURCE_MEM, \
+- }
+-#define IRQ(num) \
+- { \
+- .start = num, \
+- .end = num, \
+- .flags = IORESOURCE_IRQ, \
+- }
+-#define NAMED_IRQ(num, _name) \
+- { \
+- .start = num, \
+- .end = num, \
+- .name = _name, \
+- .flags = IORESOURCE_IRQ, \
+- }
+-
+-/* REVISIT these assume *every* device supports DMA, but several
+- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+- */
+-#define DEFINE_DEV(_name, _id) \
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
+-static struct platform_device _name##_id##_device = { \
+- .name = #_name, \
+- .id = _id, \
+- .dev = { \
+- .dma_mask = &_name##_id##_dma_mask, \
+- .coherent_dma_mask = DMA_32BIT_MASK, \
+- }, \
+- .resource = _name##_id##_resource, \
+- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
+-}
+-#define DEFINE_DEV_DATA(_name, _id) \
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
+-static struct platform_device _name##_id##_device = { \
+- .name = #_name, \
+- .id = _id, \
+- .dev = { \
+- .dma_mask = &_name##_id##_dma_mask, \
+- .platform_data = &_name##_id##_data, \
+- .coherent_dma_mask = DMA_32BIT_MASK, \
+- }, \
+- .resource = _name##_id##_resource, \
+- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
+-}
+-
+-#define select_peripheral(pin, periph, flags) \
+- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+-
+-#define DEV_CLK(_name, devname, bus, _index) \
+-static struct clk devname##_##_name = { \
+- .name = #_name, \
+- .dev = &devname##_device.dev, \
+- .parent = &bus##_clk, \
+- .mode = bus##_clk_mode, \
+- .get_rate = bus##_clk_get_rate, \
+- .index = _index, \
+-}
+-
+-static DEFINE_SPINLOCK(pm_lock);
+-
+-unsigned long at32ap7000_osc_rates[3] = {
+- [0] = 32768,
+- /* FIXME: these are ATSTK1002-specific */
+- [1] = 20000000,
+- [2] = 12000000,
+-};
+-
+-static unsigned long osc_get_rate(struct clk *clk)
+-{
+- return at32ap7000_osc_rates[clk->index];
+-}
+-
+-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+-{
+- unsigned long div, mul, rate;
+-
+- if (!(control & PM_BIT(PLLEN)))
+- return 0;
+-
+- div = PM_BFEXT(PLLDIV, control) + 1;
+- mul = PM_BFEXT(PLLMUL, control) + 1;
+-
+- rate = clk->parent->get_rate(clk->parent);
+- rate = (rate + div / 2) / div;
+- rate *= mul;
+-
+- return rate;
+-}
+-
+-static unsigned long pll0_get_rate(struct clk *clk)
+-{
+- u32 control;
+-
+- control = pm_readl(PLL0);
+-
+- return pll_get_rate(clk, control);
+-}
+-
+-static unsigned long pll1_get_rate(struct clk *clk)
+-{
+- u32 control;
+-
+- control = pm_readl(PLL1);
+-
+- return pll_get_rate(clk, control);
+-}
+-
+-/*
+- * The AT32AP7000 has five primary clock sources: One 32kHz
+- * oscillator, two crystal oscillators and two PLLs.
+- */
+-static struct clk osc32k = {
+- .name = "osc32k",
+- .get_rate = osc_get_rate,
+- .users = 1,
+- .index = 0,
+-};
+-static struct clk osc0 = {
+- .name = "osc0",
+- .get_rate = osc_get_rate,
+- .users = 1,
+- .index = 1,
+-};
+-static struct clk osc1 = {
+- .name = "osc1",
+- .get_rate = osc_get_rate,
+- .index = 2,
+-};
+-static struct clk pll0 = {
+- .name = "pll0",
+- .get_rate = pll0_get_rate,
+- .parent = &osc0,
+-};
+-static struct clk pll1 = {
+- .name = "pll1",
+- .get_rate = pll1_get_rate,
+- .parent = &osc0,
+-};
+-
+-/*
+- * The main clock can be either osc0 or pll0. The boot loader may
+- * have chosen one for us, so we don't really know which one until we
+- * have a look at the SM.
+- */
+-static struct clk *main_clock;
+-
+-/*
+- * Synchronous clocks are generated from the main clock. The clocks
+- * must satisfy the constraint
+- * fCPU >= fHSB >= fPB
+- * i.e. each clock must not be faster than its parent.
+- */
+-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+-{
+- return main_clock->get_rate(main_clock) >> shift;
+-};
+-
+-static void cpu_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(CPU_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(CPU_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long cpu_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(CPUDIV))
+- shift = PM_BFEXT(CPUSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+- u32 control;
+- unsigned long parent_rate, child_div, actual_rate, div;
+-
+- parent_rate = clk->parent->get_rate(clk->parent);
+- control = pm_readl(CKSEL);
+-
+- if (control & PM_BIT(HSBDIV))
+- child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+- else
+- child_div = 1;
+-
+- if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+- actual_rate = parent_rate;
+- control &= ~PM_BIT(CPUDIV);
+- } else {
+- unsigned int cpusel;
+- div = (parent_rate + rate / 2) / rate;
+- if (div > child_div)
+- div = child_div;
+- cpusel = (div > 1) ? (fls(div) - 2) : 0;
+- control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+- actual_rate = parent_rate / (1 << (cpusel + 1));
+- }
+-
+- pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+- clk->name, rate, actual_rate);
+-
+- if (apply)
+- pm_writel(CKSEL, control);
+-
+- return actual_rate;
+-}
+-
+-static void hsb_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(HSB_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(HSB_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long hsb_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(HSBDIV))
+- shift = PM_BFEXT(HSBSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pba_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(PBA_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(PBA_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pba_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(PBADIV))
+- shift = PM_BFEXT(PBASEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pbb_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(PBB_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(PBB_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pbb_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(PBBDIV))
+- shift = PM_BFEXT(PBBSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static struct clk cpu_clk = {
+- .name = "cpu",
+- .get_rate = cpu_clk_get_rate,
+- .set_rate = cpu_clk_set_rate,
+- .users = 1,
+-};
+-static struct clk hsb_clk = {
+- .name = "hsb",
+- .parent = &cpu_clk,
+- .get_rate = hsb_clk_get_rate,
+-};
+-static struct clk pba_clk = {
+- .name = "pba",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = pba_clk_get_rate,
+- .index = 1,
+-};
+-static struct clk pbb_clk = {
+- .name = "pbb",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .users = 1,
+- .index = 2,
+-};
+-
+-/* --------------------------------------------------------------------
+- * Generic Clock operations
+- * -------------------------------------------------------------------- */
+-
+-static void genclk_mode(struct clk *clk, int enabled)
+-{
+- u32 control;
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (enabled)
+- control |= PM_BIT(CEN);
+- else
+- control &= ~PM_BIT(CEN);
+- pm_writel(GCCTRL(clk->index), control);
+-}
+-
+-static unsigned long genclk_get_rate(struct clk *clk)
+-{
+- u32 control;
+- unsigned long div = 1;
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (control & PM_BIT(DIVEN))
+- div = 2 * (PM_BFEXT(DIV, control) + 1);
+-
+- return clk->parent->get_rate(clk->parent) / div;
+-}
+-
+-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+- u32 control;
+- unsigned long parent_rate, actual_rate, div;
+-
+- parent_rate = clk->parent->get_rate(clk->parent);
+- control = pm_readl(GCCTRL(clk->index));
+-
+- if (rate > 3 * parent_rate / 4) {
+- actual_rate = parent_rate;
+- control &= ~PM_BIT(DIVEN);
+- } else {
+- div = (parent_rate + rate) / (2 * rate) - 1;
+- control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+- actual_rate = parent_rate / (2 * (div + 1));
+- }
+-
+- dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+- clk->name, rate, actual_rate);
+-
+- if (apply)
+- pm_writel(GCCTRL(clk->index), control);
+-
+- return actual_rate;
+-}
+-
+-int genclk_set_parent(struct clk *clk, struct clk *parent)
+-{
+- u32 control;
+-
+- dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+- clk->name, parent->name, clk->parent->name);
+-
+- control = pm_readl(GCCTRL(clk->index));
+-
+- if (parent == &osc1 || parent == &pll1)
+- control |= PM_BIT(OSCSEL);
+- else if (parent == &osc0 || parent == &pll0)
+- control &= ~PM_BIT(OSCSEL);
+- else
+- return -EINVAL;
+-
+- if (parent == &pll0 || parent == &pll1)
+- control |= PM_BIT(PLLSEL);
+- else
+- control &= ~PM_BIT(PLLSEL);
+-
+- pm_writel(GCCTRL(clk->index), control);
+- clk->parent = parent;
+-
+- return 0;
+-}
+-
+-static void __init genclk_init_parent(struct clk *clk)
+-{
+- u32 control;
+- struct clk *parent;
+-
+- BUG_ON(clk->index > 7);
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (control & PM_BIT(OSCSEL))
+- parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+- else
+- parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+-
+- clk->parent = parent;
+-}
+-
+-/* --------------------------------------------------------------------
+- * System peripherals
+- * -------------------------------------------------------------------- */
+-static struct resource at32_pm0_resource[] = {
+- {
+- .start = 0xfff00000,
+- .end = 0xfff0007f,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(20),
+-};
+-
+-static struct resource at32ap700x_rtc0_resource[] = {
+- {
+- .start = 0xfff00080,
+- .end = 0xfff000af,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(21),
+-};
+-
+-static struct resource at32_wdt0_resource[] = {
+- {
+- .start = 0xfff000b0,
+- .end = 0xfff000cf,
+- .flags = IORESOURCE_MEM,
+- },
+-};
+-
+-static struct resource at32_eic0_resource[] = {
+- {
+- .start = 0xfff00100,
+- .end = 0xfff0013f,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(19),
+-};
+-
+-DEFINE_DEV(at32_pm, 0);
+-DEFINE_DEV(at32ap700x_rtc, 0);
+-DEFINE_DEV(at32_wdt, 0);
+-DEFINE_DEV(at32_eic, 0);
+-
+-/*
+- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+- * is always running.
+- */
+-static struct clk at32_pm_pclk = {
+- .name = "pclk",
+- .dev = &at32_pm0_device.dev,
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .users = 1,
+- .index = 0,
+-};
+-
+-static struct resource intc0_resource[] = {
+- PBMEM(0xfff00400),
+-};
+-struct platform_device at32_intc0_device = {
+- .name = "intc",
+- .id = 0,
+- .resource = intc0_resource,
+- .num_resources = ARRAY_SIZE(intc0_resource),
+-};
+-DEV_CLK(pclk, at32_intc0, pbb, 1);
+-
+-static struct clk ebi_clk = {
+- .name = "ebi",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = hsb_clk_get_rate,
+- .users = 1,
+-};
+-static struct clk hramc_clk = {
+- .name = "hramc",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = hsb_clk_get_rate,
+- .users = 1,
+- .index = 3,
+-};
+-
+-static struct resource smc0_resource[] = {
+- PBMEM(0xfff03400),
+-};
+-DEFINE_DEV(smc, 0);
+-DEV_CLK(pclk, smc0, pbb, 13);
+-DEV_CLK(mck, smc0, hsb, 0);
+-
+-static struct platform_device pdc_device = {
+- .name = "pdc",
+- .id = 0,
+-};
+-DEV_CLK(hclk, pdc, hsb, 4);
+-DEV_CLK(pclk, pdc, pba, 16);
+-
+-static struct clk pico_clk = {
+- .name = "pico",
+- .parent = &cpu_clk,
+- .mode = cpu_clk_mode,
+- .get_rate = cpu_clk_get_rate,
+- .users = 1,
+-};
+-
+-static struct resource dmaca0_resource[] = {
+- {
+- .start = 0xff200000,
+- .end = 0xff20ffff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(2),
+-};
+-DEFINE_DEV(dmaca, 0);
+-DEV_CLK(hclk, dmaca0, hsb, 10);
+-
+-/* --------------------------------------------------------------------
+- * HMATRIX
+- * -------------------------------------------------------------------- */
+-
+-static struct clk hmatrix_clk = {
+- .name = "hmatrix_clk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 2,
+- .users = 1,
+-};
+-#define HMATRIX_BASE ((void __iomem *)0xfff00800)
+-
+-#define hmatrix_readl(reg) \
+- __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+-#define hmatrix_writel(reg,value) \
+- __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+-
+-/*
+- * Set bits in the HMATRIX Special Function Register (SFR) used by the
+- * External Bus Interface (EBI). This can be used to enable special
+- * features like CompactFlash support, NAND Flash support, etc. on
+- * certain chipselects.
+- */
+-static inline void set_ebi_sfr_bits(u32 mask)
+-{
+- u32 sfr;
+-
+- clk_enable(&hmatrix_clk);
+- sfr = hmatrix_readl(SFR4);
+- sfr |= mask;
+- hmatrix_writel(SFR4, sfr);
+- clk_disable(&hmatrix_clk);
+-}
+-
+-/* --------------------------------------------------------------------
+- * System Timer/Counter (TC)
+- * -------------------------------------------------------------------- */
+-static struct resource at32_systc0_resource[] = {
+- PBMEM(0xfff00c00),
+- IRQ(22),
+-};
+-struct platform_device at32_systc0_device = {
+- .name = "systc",
+- .id = 0,
+- .resource = at32_systc0_resource,
+- .num_resources = ARRAY_SIZE(at32_systc0_resource),
+-};
+-DEV_CLK(pclk, at32_systc0, pbb, 3);
+-
+-/* --------------------------------------------------------------------
+- * PIO
+- * -------------------------------------------------------------------- */
+-
+-static struct resource pio0_resource[] = {
+- PBMEM(0xffe02800),
+- IRQ(13),
+-};
+-DEFINE_DEV(pio, 0);
+-DEV_CLK(mck, pio0, pba, 10);
+-
+-static struct resource pio1_resource[] = {
+- PBMEM(0xffe02c00),
+- IRQ(14),
+-};
+-DEFINE_DEV(pio, 1);
+-DEV_CLK(mck, pio1, pba, 11);
+-
+-static struct resource pio2_resource[] = {
+- PBMEM(0xffe03000),
+- IRQ(15),
+-};
+-DEFINE_DEV(pio, 2);
+-DEV_CLK(mck, pio2, pba, 12);
+-
+-static struct resource pio3_resource[] = {
+- PBMEM(0xffe03400),
+- IRQ(16),
+-};
+-DEFINE_DEV(pio, 3);
+-DEV_CLK(mck, pio3, pba, 13);
+-
+-static struct resource pio4_resource[] = {
+- PBMEM(0xffe03800),
+- IRQ(17),
+-};
+-DEFINE_DEV(pio, 4);
+-DEV_CLK(mck, pio4, pba, 14);
+-
+-void __init at32_add_system_devices(void)
+-{
+- platform_device_register(&at32_pm0_device);
+- platform_device_register(&at32_intc0_device);
+- platform_device_register(&at32ap700x_rtc0_device);
+- platform_device_register(&at32_wdt0_device);
+- platform_device_register(&at32_eic0_device);
+- platform_device_register(&smc0_device);
+- platform_device_register(&pdc_device);
+- platform_device_register(&dmaca0_device);
+-
+- platform_device_register(&at32_systc0_device);
+-
+- platform_device_register(&pio0_device);
+- platform_device_register(&pio1_device);
+- platform_device_register(&pio2_device);
+- platform_device_register(&pio3_device);
+- platform_device_register(&pio4_device);
+-}
+-
+-/* --------------------------------------------------------------------
+- * USART
+- * -------------------------------------------------------------------- */
+-
+-static struct atmel_uart_data atmel_usart0_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart0_resource[] = {
+- PBMEM(0xffe00c00),
+- IRQ(6),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 0);
+-DEV_CLK(usart, atmel_usart0, pba, 3);
+-
+-static struct atmel_uart_data atmel_usart1_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart1_resource[] = {
+- PBMEM(0xffe01000),
+- IRQ(7),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 1);
+-DEV_CLK(usart, atmel_usart1, pba, 4);
+-
+-static struct atmel_uart_data atmel_usart2_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart2_resource[] = {
+- PBMEM(0xffe01400),
+- IRQ(8),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 2);
+-DEV_CLK(usart, atmel_usart2, pba, 5);
+-
+-static struct atmel_uart_data atmel_usart3_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart3_resource[] = {
+- PBMEM(0xffe01800),
+- IRQ(9),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 3);
+-DEV_CLK(usart, atmel_usart3, pba, 6);
+-
+-static inline void configure_usart0_pins(void)
+-{
+- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
+- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
+-}
+-
+-static inline void configure_usart1_pins(void)
+-{
+- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
+- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
+-}
+-
+-static inline void configure_usart2_pins(void)
+-{
+- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
+- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
+-}
+-
+-static inline void configure_usart3_pins(void)
+-{
+- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
+- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
+-}
+-
+-static struct platform_device *__initdata at32_usarts[4];
+-
+-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+-{
+- struct platform_device *pdev;
+-
+- switch (hw_id) {
+- case 0:
+- pdev = &atmel_usart0_device;
+- configure_usart0_pins();
+- break;
+- case 1:
+- pdev = &atmel_usart1_device;
+- configure_usart1_pins();
+- break;
+- case 2:
+- pdev = &atmel_usart2_device;
+- configure_usart2_pins();
+- break;
+- case 3:
+- pdev = &atmel_usart3_device;
+- configure_usart3_pins();
+- break;
+- default:
+- return;
+- }
+-
+- if (PXSEG(pdev->resource[0].start) == P4SEG) {
+- /* Addresses in the P4 segment are permanently mapped 1:1 */
+- struct atmel_uart_data *data = pdev->dev.platform_data;
+- data->regs = (void __iomem *)pdev->resource[0].start;
+- }
+-
+- pdev->id = line;
+- at32_usarts[line] = pdev;
+-}
+-
+-struct platform_device *__init at32_add_device_usart(unsigned int id)
+-{
+- platform_device_register(at32_usarts[id]);
+- return at32_usarts[id];
+-}
+-
+-struct platform_device *atmel_default_console_device;
+-
+-void __init at32_setup_serial_console(unsigned int usart_id)
+-{
+- atmel_default_console_device = at32_usarts[usart_id];
+-}
+-
+-/* --------------------------------------------------------------------
+- * Ethernet
+- * -------------------------------------------------------------------- */
+-
+-static struct eth_platform_data macb0_data;
+-static struct resource macb0_resource[] = {
+- PBMEM(0xfff01800),
+- IRQ(25),
+-};
+-DEFINE_DEV_DATA(macb, 0);
+-DEV_CLK(hclk, macb0, hsb, 8);
+-DEV_CLK(pclk, macb0, pbb, 6);
+-
+-static struct eth_platform_data macb1_data;
+-static struct resource macb1_resource[] = {
+- PBMEM(0xfff01c00),
+- IRQ(26),
+-};
+-DEFINE_DEV_DATA(macb, 1);
+-DEV_CLK(hclk, macb1, hsb, 9);
+-DEV_CLK(pclk, macb1, pbb, 7);
+-
+-struct platform_device *__init
+-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &macb0_device;
+-
+- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
+- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
+- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
+- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
+- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
+- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
+- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
+- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
+- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
+- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
+-
+- if (!data->is_rmii) {
+- select_peripheral(PC(0), PERIPH_A, 0); /* COL */
+- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
+- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
+- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
+- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
+- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
+- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
+- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
+- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
+- }
+- break;
+-
+- case 1:
+- pdev = &macb1_device;
+-
+- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
+- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
+- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
+- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
+- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
+- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
+- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
+- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
+- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
+- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
+-
+- if (!data->is_rmii) {
+- select_peripheral(PC(19), PERIPH_B, 0); /* COL */
+- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
+- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
+- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
+- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
+- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
+- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
+- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
+- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
+- }
+- break;
+-
+- default:
+- return NULL;
+- }
+-
+- memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+- platform_device_register(pdev);
+-
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * SPI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_spi0_resource[] = {
+- PBMEM(0xffe00000),
+- IRQ(3),
+-};
+-DEFINE_DEV(atmel_spi, 0);
+-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+-
+-static struct resource atmel_spi1_resource[] = {
+- PBMEM(0xffe00400),
+- IRQ(4),
+-};
+-DEFINE_DEV(atmel_spi, 1);
+-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+-
+-static void __init
+-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+- unsigned int n, const u8 *pins)
+-{
+- unsigned int pin, mode;
+-
+- for (; n; n--, b++) {
+- b->bus_num = bus_num;
+- if (b->chip_select >= 4)
+- continue;
+- pin = (unsigned)b->controller_data;
+- if (!pin) {
+- pin = pins[b->chip_select];
+- b->controller_data = (void *)pin;
+- }
+- mode = AT32_GPIOF_OUTPUT;
+- if (!(b->mode & SPI_CS_HIGH))
+- mode |= AT32_GPIOF_HIGH;
+- at32_select_gpio(pin, mode);
+- }
+-}
+-
+-struct platform_device *__init
+-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+-{
+- /*
+- * Manage the chipselects as GPIOs, normally using the same pins
+- * the SPI controller expects; but boards can use other pins.
+- */
+- static u8 __initdata spi0_pins[] =
+- { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+- GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+- static u8 __initdata spi1_pins[] =
+- { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+- GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &atmel_spi0_device;
+- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
+- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+- at32_spi_setup_slaves(0, b, n, spi0_pins);
+- break;
+-
+- case 1:
+- pdev = &atmel_spi1_device;
+- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
+- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
+- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
+- at32_spi_setup_slaves(1, b, n, spi1_pins);
+- break;
+-
+- default:
+- return NULL;
+- }
+-
+- spi_register_board_info(b, n);
+- platform_device_register(pdev);
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * TWI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_twi0_resource[] __initdata = {
+- PBMEM(0xffe00800),
+- IRQ(5),
+-};
+-static struct clk atmel_twi0_pclk = {
+- .name = "twi_pclk",
+- .parent = &pba_clk,
+- .mode = pba_clk_mode,
+- .get_rate = pba_clk_get_rate,
+- .index = 2,
+-};
+-
+-struct platform_device *__init at32_add_device_twi(unsigned int id)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("atmel_twi", id);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, atmel_twi0_resource,
+- ARRAY_SIZE(atmel_twi0_resource)))
+- goto err_add_resources;
+-
+- select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
+- select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
+-
+- atmel_twi0_pclk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-err_add_resources:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * MMC
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_mci0_resource[] __initdata = {
+- PBMEM(0xfff02400),
+- IRQ(28),
+-};
+-static struct clk atmel_mci0_pclk = {
+- .name = "mci_clk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 9,
+-};
+-
+-struct platform_device *__init at32_add_device_mci(unsigned int id)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("atmel_mci", id);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, atmel_mci0_resource,
+- ARRAY_SIZE(atmel_mci0_resource)))
+- goto err_add_resources;
+-
+- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
+- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
+- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
+- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
+- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
+- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
+-
+- atmel_mci0_pclk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-err_add_resources:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * LCDC
+- * -------------------------------------------------------------------- */
+-static struct atmel_lcdfb_info atmel_lcdfb0_data;
+-static struct resource atmel_lcdfb0_resource[] = {
+- {
+- .start = 0xff000000,
+- .end = 0xff000fff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(1),
+- {
+- /* Placeholder for pre-allocated fb memory */
+- .start = 0x00000000,
+- .end = 0x00000000,
+- .flags = 0,
+- },
+-};
+-DEFINE_DEV_DATA(atmel_lcdfb, 0);
+-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+-static struct clk atmel_lcdfb0_pixclk = {
+- .name = "lcdc_clk",
+- .dev = &atmel_lcdfb0_device.dev,
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 7,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+- unsigned long fbmem_start, unsigned long fbmem_len)
+-{
+- struct platform_device *pdev;
+- struct atmel_lcdfb_info *info;
+- struct fb_monspecs *monspecs;
+- struct fb_videomode *modedb;
+- unsigned int modedb_size;
+-
+- /*
+- * Do a deep copy of the fb data, monspecs and modedb. Make
+- * sure all allocations are done before setting up the
+- * portmux.
+- */
+- monspecs = kmemdup(data->default_monspecs,
+- sizeof(struct fb_monspecs), GFP_KERNEL);
+- if (!monspecs)
+- return NULL;
+-
+- modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+- modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+- if (!modedb)
+- goto err_dup_modedb;
+- monspecs->modedb = modedb;
+-
+- switch (id) {
+- case 0:
+- pdev = &atmel_lcdfb0_device;
+- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
+- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
+- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
+- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
+- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
+- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
+- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
+- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
+- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
+- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
+- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
+- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
+- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
+- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
+- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
+- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
+- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
+- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
+- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
+- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
+- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
+- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
+- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
+- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
+- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
+- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
+- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
+- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
+- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
+- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
+- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
+-
+- clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+- clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+- break;
+-
+- default:
+- goto err_invalid_id;
+- }
+-
+- if (fbmem_len) {
+- pdev->resource[2].start = fbmem_start;
+- pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+- pdev->resource[2].flags = IORESOURCE_MEM;
+- }
+-
+- info = pdev->dev.platform_data;
+- memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+- info->default_monspecs = monspecs;
+-
+- platform_device_register(pdev);
+- return pdev;
+-
+-err_invalid_id:
+- kfree(modedb);
+-err_dup_modedb:
+- kfree(monspecs);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * SSC
+- * -------------------------------------------------------------------- */
+-static struct resource ssc0_resource[] = {
+- PBMEM(0xffe01c00),
+- IRQ(10),
+-};
+-DEFINE_DEV(ssc, 0);
+-DEV_CLK(pclk, ssc0, pba, 7);
+-
+-static struct resource ssc1_resource[] = {
+- PBMEM(0xffe02000),
+- IRQ(11),
+-};
+-DEFINE_DEV(ssc, 1);
+-DEV_CLK(pclk, ssc1, pba, 8);
+-
+-static struct resource ssc2_resource[] = {
+- PBMEM(0xffe02400),
+- IRQ(12),
+-};
+-DEFINE_DEV(ssc, 2);
+-DEV_CLK(pclk, ssc2, pba, 9);
+-
+-struct platform_device *__init
+-at32_add_device_ssc(unsigned int id, unsigned int flags)
+-{
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &ssc0_device;
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PA(21), PERIPH_A, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PA(22), PERIPH_A, 0); /* RK */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PA(23), PERIPH_A, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PA(24), PERIPH_A, 0); /* TF */
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PA(25), PERIPH_A, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PA(26), PERIPH_A, 0); /* RD */
+- break;
+- case 1:
+- pdev = &ssc1_device;
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PA(0), PERIPH_B, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PA(1), PERIPH_B, 0); /* RK */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PA(2), PERIPH_B, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PA(3), PERIPH_B, 0); /* TF */
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PA(4), PERIPH_B, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PA(5), PERIPH_B, 0); /* RD */
+- break;
+- case 2:
+- pdev = &ssc2_device;
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PB(13), PERIPH_A, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PB(14), PERIPH_A, 0); /* RD */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PB(15), PERIPH_A, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PB(16), PERIPH_A, 0); /* TF */
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PB(17), PERIPH_A, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PB(18), PERIPH_A, 0); /* RK */
+- break;
+- default:
+- return NULL;
+- }
+-
+- platform_device_register(pdev);
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * USB Device Controller
+- * -------------------------------------------------------------------- */
+-static struct resource usba0_resource[] __initdata = {
+- {
+- .start = 0xff300000,
+- .end = 0xff3fffff,
+- .flags = IORESOURCE_MEM,
+- }, {
+- .start = 0xfff03000,
+- .end = 0xfff033ff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(31),
+-};
+-static struct clk usba0_pclk = {
+- .name = "pclk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 12,
+-};
+-static struct clk usba0_hclk = {
+- .name = "hclk",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = hsb_clk_get_rate,
+- .index = 6,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("atmel_usba_udc", 0);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, usba0_resource,
+- ARRAY_SIZE(usba0_resource)))
+- goto out_free_pdev;
+-
+- if (data) {
+- if (platform_device_add_data(pdev, data, sizeof(*data)))
+- goto out_free_pdev;
+-
+- if (data->vbus_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->vbus_pin, 0);
+- }
+-
+- usba0_pclk.dev = &pdev->dev;
+- usba0_hclk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+-
+- return pdev;
+-
+-out_free_pdev:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * IDE / CompactFlash
+- * -------------------------------------------------------------------- */
+-static struct resource at32_smc_cs4_resource[] __initdata = {
+- {
+- .start = 0x04000000,
+- .end = 0x07ffffff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(~0UL), /* Magic IRQ will be overridden */
+-};
+-static struct resource at32_smc_cs5_resource[] __initdata = {
+- {
+- .start = 0x20000000,
+- .end = 0x23ffffff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(~0UL), /* Magic IRQ will be overridden */
+-};
+-
+-static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+- unsigned int cs, unsigned int extint)
+-{
+- static unsigned int extint_pin_map[4] __initdata = {
+- GPIO_PIN_PB(25),
+- GPIO_PIN_PB(26),
+- GPIO_PIN_PB(27),
+- GPIO_PIN_PB(28),
+- };
+- static bool common_pins_initialized __initdata = false;
+- unsigned int extint_pin;
+- int ret;
+-
+- if (extint >= ARRAY_SIZE(extint_pin_map))
+- return -EINVAL;
+- extint_pin = extint_pin_map[extint];
+-
+- switch (cs) {
+- case 4:
+- ret = platform_device_add_resources(pdev,
+- at32_smc_cs4_resource,
+- ARRAY_SIZE(at32_smc_cs4_resource));
+- if (ret)
+- return ret;
+-
+- select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
+- set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+- break;
+- case 5:
+- ret = platform_device_add_resources(pdev,
+- at32_smc_cs5_resource,
+- ARRAY_SIZE(at32_smc_cs5_resource));
+- if (ret)
+- return ret;
+-
+- select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
+- set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+- break;
+- default:
+- return -EINVAL;
+- }
+-
+- if (!common_pins_initialized) {
+- select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
+- select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
+- select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
+- select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
+- common_pins_initialized = true;
+- }
+-
+- at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+-
+- pdev->resource[1].start = EIM_IRQ_BASE + extint;
+- pdev->resource[1].end = pdev->resource[1].start;
+-
+- return 0;
+-}
+-
+-struct platform_device *__init
+-at32_add_device_ide(unsigned int id, unsigned int extint,
+- struct ide_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- pdev = platform_device_alloc("at32_ide", id);
+- if (!pdev)
+- goto fail;
+-
+- if (platform_device_add_data(pdev, data,
+- sizeof(struct ide_platform_data)))
+- goto fail;
+-
+- if (at32_init_ide_or_cf(pdev, data->cs, extint))
+- goto fail;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-fail:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-struct platform_device *__init
+-at32_add_device_cf(unsigned int id, unsigned int extint,
+- struct cf_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- pdev = platform_device_alloc("at32_cf", id);
+- if (!pdev)
+- goto fail;
+-
+- if (platform_device_add_data(pdev, data,
+- sizeof(struct cf_platform_data)))
+- goto fail;
+-
+- if (at32_init_ide_or_cf(pdev, data->cs, extint))
+- goto fail;
+-
+- if (data->detect_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
+- if (data->reset_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->reset_pin, 0);
+- if (data->vcc_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->vcc_pin, 0);
+- /* READY is used as extint, so we can't select it as gpio */
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-fail:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * AC97C
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_ac97c0_resource[] __initdata = {
+- PBMEM(0xfff02800),
+- IRQ(29),
+-};
+-static struct clk atmel_ac97c0_pclk = {
+- .name = "pclk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 10,
+-};
+-
+-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("atmel_ac97c", id);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+- ARRAY_SIZE(atmel_ac97c0_resource)))
+- goto err_add_resources;
+-
+- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
+- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
+- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
+- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
+-
+- atmel_ac97c0_pclk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-err_add_resources:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * ABDAC
+- * -------------------------------------------------------------------- */
+-static struct resource abdac0_resource[] __initdata = {
+- PBMEM(0xfff02000),
+- IRQ(27),
+-};
+-static struct clk abdac0_pclk = {
+- .name = "pclk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 8,
+-};
+-static struct clk abdac0_sample_clk = {
+- .name = "sample_clk",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 6,
+-};
+-
+-struct platform_device *__init at32_add_device_abdac(unsigned int id)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("abdac", id);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, abdac0_resource,
+- ARRAY_SIZE(abdac0_resource)))
+- goto err_add_resources;
+-
+- select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
+- select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
+- select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
+- select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
+-
+- abdac0_pclk.dev = &pdev->dev;
+- abdac0_sample_clk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-err_add_resources:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * GCLK
+- * -------------------------------------------------------------------- */
+-static struct clk gclk0 = {
+- .name = "gclk0",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 0,
+-};
+-static struct clk gclk1 = {
+- .name = "gclk1",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 1,
+-};
+-static struct clk gclk2 = {
+- .name = "gclk2",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 2,
+-};
+-static struct clk gclk3 = {
+- .name = "gclk3",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 3,
+-};
+-static struct clk gclk4 = {
+- .name = "gclk4",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 4,
+-};
+-
+-struct clk *at32_clock_list[] = {
+- &osc32k,
+- &osc0,
+- &osc1,
+- &pll0,
+- &pll1,
+- &cpu_clk,
+- &hsb_clk,
+- &pba_clk,
+- &pbb_clk,
+- &at32_pm_pclk,
+- &at32_intc0_pclk,
+- &hmatrix_clk,
+- &ebi_clk,
+- &hramc_clk,
+- &smc0_pclk,
+- &smc0_mck,
+- &pdc_hclk,
+- &pdc_pclk,
+- &dmaca0_hclk,
+- &pico_clk,
+- &pio0_mck,
+- &pio1_mck,
+- &pio2_mck,
+- &pio3_mck,
+- &pio4_mck,
+- &at32_systc0_pclk,
+- &atmel_usart0_usart,
+- &atmel_usart1_usart,
+- &atmel_usart2_usart,
+- &atmel_usart3_usart,
+- &macb0_hclk,
+- &macb0_pclk,
+- &macb1_hclk,
+- &macb1_pclk,
+- &atmel_spi0_spi_clk,
+- &atmel_spi1_spi_clk,
+- &atmel_twi0_pclk,
+- &atmel_mci0_pclk,
+- &atmel_lcdfb0_hck1,
+- &atmel_lcdfb0_pixclk,
+- &ssc0_pclk,
+- &ssc1_pclk,
+- &ssc2_pclk,
+- &usba0_hclk,
+- &usba0_pclk,
+- &atmel_ac97c0_pclk,
+- &abdac0_pclk,
+- &abdac0_sample_clk,
+- &gclk0,
+- &gclk1,
+- &gclk2,
+- &gclk3,
+- &gclk4,
+-};
+-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+-
+-void __init at32_portmux_init(void)
+-{
+- at32_init_pio(&pio0_device);
+- at32_init_pio(&pio1_device);
+- at32_init_pio(&pio2_device);
+- at32_init_pio(&pio3_device);
+- at32_init_pio(&pio4_device);
+-}
+-
+-void __init at32_clock_init(void)
+-{
+- u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+- int i;
+-
+- if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+- main_clock = &pll0;
+- cpu_clk.parent = &pll0;
+- } else {
+- main_clock = &osc0;
+- cpu_clk.parent = &osc0;
+- }
+-
+- if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+- pll0.parent = &osc1;
+- if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+- pll1.parent = &osc1;
+-
+- genclk_init_parent(&gclk0);
+- genclk_init_parent(&gclk1);
+- genclk_init_parent(&gclk2);
+- genclk_init_parent(&gclk3);
+- genclk_init_parent(&gclk4);
+- genclk_init_parent(&atmel_lcdfb0_pixclk);
+- genclk_init_parent(&abdac0_sample_clk);
+-
+- /*
+- * Turn on all clocks that have at least one user already, and
+- * turn off everything else. We only do this for module
+- * clocks, and even though it isn't particularly pretty to
+- * check the address of the mode function, it should do the
+- * trick...
+- */
+- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+- struct clk *clk = at32_clock_list[i];
+-
+- if (clk->users == 0)
+- continue;
+-
+- if (clk->mode == &cpu_clk_mode)
+- cpu_mask |= 1 << clk->index;
+- else if (clk->mode == &hsb_clk_mode)
+- hsb_mask |= 1 << clk->index;
+- else if (clk->mode == &pba_clk_mode)
+- pba_mask |= 1 << clk->index;
+- else if (clk->mode == &pbb_clk_mode)
+- pbb_mask |= 1 << clk->index;
+- }
+-
+- pm_writel(CPU_MASK, cpu_mask);
+- pm_writel(HSB_MASK, hsb_mask);
+- pm_writel(PBA_MASK, pba_mask);
+- pm_writel(PBB_MASK, pbb_mask);
+-}
+diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
+new file mode 100644
+index 0000000..06795d0
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/at32ap700x.c
+@@ -0,0 +1,1809 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
+ */
-+static struct clk at32_pm_pclk = {
- .name = "pclk",
-- .dev = &at32_sm_device.dev,
-+ .dev = &at32_pm0_device.dev,
- .parent = &pbb_clk,
- .mode = pbb_clk_mode,
- .get_rate = pbb_clk_get_rate,
-@@ -491,6 +562,17 @@
- .users = 1,
- };
-
-+static struct resource dmaca0_resource[] = {
-+ {
-+ .start = 0xff200000,
-+ .end = 0xff20ffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(2),
-+};
-+DEFINE_DEV(dmaca, 0);
-+DEV_CLK(hclk, dmaca0, hsb, 10);
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/spi/spi.h>
+
- /* --------------------------------------------------------------------
- * HMATRIX
- * -------------------------------------------------------------------- */
-@@ -583,12 +665,14 @@
-
- void __init at32_add_system_devices(void)
- {
-- system_manager.eim_first_irq = EIM_IRQ_BASE;
--
-- platform_device_register(&at32_sm_device);
-+ platform_device_register(&at32_pm0_device);
- platform_device_register(&at32_intc0_device);
-+ platform_device_register(&at32ap700x_rtc0_device);
-+ platform_device_register(&at32_wdt0_device);
-+ platform_device_register(&at32_eic0_device);
- platform_device_register(&smc0_device);
- platform_device_register(&pdc_device);
-+ platform_device_register(&dmaca0_device);
-
- platform_device_register(&at32_systc0_device);
-
-@@ -894,6 +978,83 @@
- }
-
- /* --------------------------------------------------------------------
-+ * TWI
-+ * -------------------------------------------------------------------- */
++#include <asm/io.h>
++#include <asm/irq.h>
+
-+static struct resource atmel_twi0_resource[] = {
-+ PBMEM(0xffe00800),
-+ IRQ(5),
-+};
-+DEFINE_DEV(atmel_twi, 0);
-+DEV_CLK(pclk,atmel_twi0,pba,2);
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
+
-+struct platform_device *__init
-+at32_add_device_twi(unsigned int id)
-+{
-+ struct platform_device *pdev;
++#include <video/atmel_lcdc.h>
+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_twi0_device;
-+ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
-+ select_peripheral(PA(7), PERIPH_A, 0); /* SCL */
-+ break;
++#include "clock.h"
++#include "hmatrix.h"
++#include "pio.h"
++#include "pm.h"
+
-+ default:
-+ return NULL;
++
++#define PBMEM(base) \
++ { \
++ .start = base, \
++ .end = base + 0x3ff, \
++ .flags = IORESOURCE_MEM, \
++ }
++#define IRQ(num) \
++ { \
++ .start = num, \
++ .end = num, \
++ .flags = IORESOURCE_IRQ, \
++ }
++#define NAMED_IRQ(num, _name) \
++ { \
++ .start = num, \
++ .end = num, \
++ .name = _name, \
++ .flags = IORESOURCE_IRQ, \
+ }
+
-+ platform_device_register(pdev);
-+ return pdev;
++/* REVISIT these assume *every* device supports DMA, but several
++ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
++ */
++#define DEFINE_DEV(_name, _id) \
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
++static struct platform_device _name##_id##_device = { \
++ .name = #_name, \
++ .id = _id, \
++ .dev = { \
++ .dma_mask = &_name##_id##_dma_mask, \
++ .coherent_dma_mask = DMA_32BIT_MASK, \
++ }, \
++ .resource = _name##_id##_resource, \
++ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
++}
++#define DEFINE_DEV_DATA(_name, _id) \
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
++static struct platform_device _name##_id##_device = { \
++ .name = #_name, \
++ .id = _id, \
++ .dev = { \
++ .dma_mask = &_name##_id##_dma_mask, \
++ .platform_data = &_name##_id##_data, \
++ .coherent_dma_mask = DMA_32BIT_MASK, \
++ }, \
++ .resource = _name##_id##_resource, \
++ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
+}
+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct mci_platform_data atmel_mci0_data = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+};
-+static struct resource atmel_mci0_resource[] = {
-+ PBMEM(0xfff02400),
-+ IRQ(28),
++#define select_peripheral(pin, periph, flags) \
++ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
++
++#define DEV_CLK(_name, devname, bus, _index) \
++static struct clk devname##_##_name = { \
++ .name = #_name, \
++ .dev = &devname##_device.dev, \
++ .parent = &bus##_clk, \
++ .mode = bus##_clk_mode, \
++ .get_rate = bus##_clk_get_rate, \
++ .index = _index, \
++}
++
++static DEFINE_SPINLOCK(pm_lock);
++
++unsigned long at32ap7000_osc_rates[3] = {
++ [0] = 32768,
++ /* FIXME: these are ATSTK1002-specific */
++ [1] = 20000000,
++ [2] = 12000000,
+};
-+DEFINE_DEV_DATA(atmel_mci, 0);
-+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++static unsigned long osc_get_rate(struct clk *clk)
+{
-+ struct platform_device *pdev;
++ return at32ap7000_osc_rates[clk->index];
++}
+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_mci0_device;
-+ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
-+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
-+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
-+ break;
-+ default:
-+ return NULL;
-+ }
++static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
++{
++ unsigned long div, mul, rate;
+
-+ if (data) {
-+ if (data->detect_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->detect_pin, 0);
-+ if (data->wp_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->wp_pin, 0);
-+ memcpy(pdev->dev.platform_data, data,
-+ sizeof(struct mci_platform_data));
-+ }
++ if (!(control & PM_BIT(PLLEN)))
++ return 0;
+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
++ div = PM_BFEXT(PLLDIV, control) + 1;
++ mul = PM_BFEXT(PLLMUL, control) + 1;
+
-+/* --------------------------------------------------------------------
- * LCDC
- * -------------------------------------------------------------------- */
- static struct atmel_lcdfb_info atmel_lcdfb0_data;
-@@ -1013,6 +1174,228 @@
- }
-
- /* --------------------------------------------------------------------
-+ * USB Device Controller
-+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] __initdata = {
-+ {
-+ .name = "fifo",
-+ .start = 0xff300000,
-+ .end = 0xff3fffff,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .name = "regs",
-+ .start = 0xfff03000,
-+ .end = 0xfff033ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(31),
-+};
-+static struct clk usba0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 12,
-+};
-+static struct clk usba0_hclk = {
-+ .name = "hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 6,
-+};
++ rate = clk->parent->get_rate(clk->parent);
++ rate = (rate + div / 2) / div;
++ rate *= mul;
+
-+struct platform_device *__init
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++ return rate;
++}
++
++static unsigned long pll0_get_rate(struct clk *clk)
+{
-+ struct platform_device *pdev;
++ u32 control;
+
-+ if (id != 0)
-+ return NULL;
++ control = pm_readl(PLL0);
+
-+ pdev = platform_device_alloc("atmel_usba_udc", 0);
-+ if (!pdev)
-+ return NULL;
++ return pll_get_rate(clk, control);
++}
+
-+ if (platform_device_add_resources(pdev, usba0_resource,
-+ ARRAY_SIZE(usba0_resource)))
-+ goto out_free_pdev;
++static unsigned long pll1_get_rate(struct clk *clk)
++{
++ u32 control;
+
-+ if (data) {
-+ if (platform_device_add_data(pdev, data, sizeof(*data)))
-+ goto out_free_pdev;
++ control = pm_readl(PLL1);
+
-+ if (data->vbus_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->vbus_pin, 0);
-+ }
++ return pll_get_rate(clk, control);
++}
+
-+ usba0_pclk.dev = &pdev->dev;
-+ usba0_hclk.dev = &pdev->dev;
++/*
++ * The AT32AP7000 has five primary clock sources: One 32kHz
++ * oscillator, two crystal oscillators and two PLLs.
++ */
++static struct clk osc32k = {
++ .name = "osc32k",
++ .get_rate = osc_get_rate,
++ .users = 1,
++ .index = 0,
++};
++static struct clk osc0 = {
++ .name = "osc0",
++ .get_rate = osc_get_rate,
++ .users = 1,
++ .index = 1,
++};
++static struct clk osc1 = {
++ .name = "osc1",
++ .get_rate = osc_get_rate,
++ .index = 2,
++};
++static struct clk pll0 = {
++ .name = "pll0",
++ .get_rate = pll0_get_rate,
++ .parent = &osc0,
++};
++static struct clk pll1 = {
++ .name = "pll1",
++ .get_rate = pll1_get_rate,
++ .parent = &osc0,
++};
+
-+ platform_device_add(pdev);
++/*
++ * The main clock can be either osc0 or pll0. The boot loader may
++ * have chosen one for us, so we don't really know which one until we
++ * have a look at the SM.
++ */
++static struct clk *main_clock;
+
-+ return pdev;
++/*
++ * Synchronous clocks are generated from the main clock. The clocks
++ * must satisfy the constraint
++ * fCPU >= fHSB >= fPB
++ * i.e. each clock must not be faster than its parent.
++ */
++static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
++{
++ return main_clock->get_rate(main_clock) >> shift;
++};
+
-+out_free_pdev:
-+ platform_device_put(pdev);
-+ return NULL;
++static void cpu_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(CPU_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(CPU_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
+}
+
-+/* --------------------------------------------------------------------
-+ * SSC
-+ * -------------------------------------------------------------------- */
-+static struct resource ssc0_resource[] = {
-+ PBMEM(0xffe01c00),
-+ IRQ(10),
-+};
-+DEFINE_DEV(ssc, 0);
-+DEV_CLK(pclk, ssc0, pba, 7);
++static unsigned long cpu_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
+
-+static struct resource ssc1_resource[] = {
-+ PBMEM(0xffe02000),
-+ IRQ(11),
-+};
-+DEFINE_DEV(ssc, 1);
-+DEV_CLK(pclk, ssc1, pba, 8);
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(CPUDIV))
++ shift = PM_BFEXT(CPUSEL, cksel) + 1;
+
-+static struct resource ssc2_resource[] = {
-+ PBMEM(0xffe02400),
-+ IRQ(12),
-+};
-+DEFINE_DEV(ssc, 2);
-+DEV_CLK(pclk, ssc2, pba, 9);
++ return bus_clk_get_rate(clk, shift);
++}
+
-+struct platform_device *__init
-+at32_add_device_ssc(unsigned int id, unsigned int flags)
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
-+ struct platform_device *pdev;
++ u32 control;
++ unsigned long parent_rate, child_div, actual_rate, div;
+
-+ switch (id) {
-+ case 0:
-+ pdev = &ssc0_device;
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
-+ break;
-+ case 1:
-+ pdev = &ssc1_device;
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
-+ break;
-+ case 2:
-+ pdev = &ssc2_device;
-+ if (flags & ATMEL_SSC_TD)
-+ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
-+ if (flags & ATMEL_SSC_RD)
-+ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
-+ if (flags & ATMEL_SSC_TK)
-+ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
-+ if (flags & ATMEL_SSC_TF)
-+ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
-+ if (flags & ATMEL_SSC_RF)
-+ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
-+ if (flags & ATMEL_SSC_RK)
-+ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
-+ break;
-+ default:
-+ return NULL;
++ parent_rate = clk->parent->get_rate(clk->parent);
++ control = pm_readl(CKSEL);
++
++ if (control & PM_BIT(HSBDIV))
++ child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++ else
++ child_div = 1;
++
++ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++ actual_rate = parent_rate;
++ control &= ~PM_BIT(CPUDIV);
++ } else {
++ unsigned int cpusel;
++ div = (parent_rate + rate / 2) / rate;
++ if (div > child_div)
++ div = child_div;
++ cpusel = (div > 1) ? (fls(div) - 2) : 0;
++ control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++ actual_rate = parent_rate / (1 << (cpusel + 1));
+ }
+
-+ platform_device_register(pdev);
-+ return pdev;
++ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
++
++ if (apply)
++ pm_writel(CKSEL, control);
++
++ return actual_rate;
+}
+
-+/* --------------------------------------------------------------------
-+ * AC97C
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] = {
-+ PBMEM(0xfff02800),
-+ IRQ(29),
-+};
-+DEFINE_DEV(atmel_ac97c, 0);
-+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
++static void hsb_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
+
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id)
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(HSB_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(HSB_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long hsb_clk_get_rate(struct clk *clk)
+{
-+ struct platform_device *pdev;
++ unsigned long cksel, shift = 0;
+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_ac97c0_device;
-+ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
-+ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
-+ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
-+ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
-+ break;
-+ default:
-+ return NULL;
-+ }
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(HSBDIV))
++ shift = PM_BFEXT(HSBSEL, cksel) + 1;
+
-+ platform_device_register(pdev);
-+ return pdev;
++ return bus_clk_get_rate(clk, shift);
+}
+
-+/* --------------------------------------------------------------------
-+ * DAC
-+ * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] = {
-+ PBMEM(0xfff02000),
-+ IRQ(27),
-+};
-+DEFINE_DEV(abdac, 0);
-+DEV_CLK(pclk, abdac0, pbb, 8);
-+static struct clk abdac0_sample_clk = {
-+ .name = "sample_clk",
-+ .dev = &abdac0_device.dev,
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 6,
-+};
++static void pba_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
+
-+struct platform_device *__init
-+at32_add_device_abdac(unsigned int id)
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(PBA_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(PBA_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pba_clk_get_rate(struct clk *clk)
+{
-+ struct platform_device *pdev;
++ unsigned long cksel, shift = 0;
+
-+ switch (id) {
-+ case 0:
-+ pdev = &abdac0_device;
-+ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
-+ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
-+ break;
-+ default:
-+ return NULL;
-+ }
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(PBADIV))
++ shift = PM_BFEXT(PBASEL, cksel) + 1;
+
-+ platform_device_register(pdev);
-+ return pdev;
++ return bus_clk_get_rate(clk, shift);
+}
+
-+/* --------------------------------------------------------------------
- * GCLK
- * -------------------------------------------------------------------- */
- static struct clk gclk0 = {
-@@ -1066,7 +1449,7 @@
- &hsb_clk,
- &pba_clk,
- &pbb_clk,
-- &at32_sm_pclk,
-+ &at32_pm_pclk,
- &at32_intc0_pclk,
- &hmatrix_clk,
- &ebi_clk,
-@@ -1075,6 +1458,7 @@
- &smc0_mck,
- &pdc_hclk,
- &pdc_pclk,
-+ &dmaca0_hclk,
- &pico_clk,
- &pio0_mck,
- &pio1_mck,
-@@ -1092,8 +1476,18 @@
- &macb1_pclk,
- &atmel_spi0_spi_clk,
- &atmel_spi1_spi_clk,
-+ &atmel_twi0_pclk,
-+ &atmel_mci0_mci_clk,
- &atmel_lcdfb0_hck1,
- &atmel_lcdfb0_pixclk,
-+ &usba0_pclk,
-+ &usba0_hclk,
-+ &ssc0_pclk,
-+ &ssc1_pclk,
-+ &ssc2_pclk,
-+ &atmel_ac97c0_pclk,
-+ &abdac0_pclk,
-+ &abdac0_sample_clk,
- &gclk0,
- &gclk1,
- &gclk2,
-@@ -1113,18 +1507,20 @@
-
- void __init at32_clock_init(void)
- {
-- struct at32_sm *sm = &system_manager;
- u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
- int i;
-
-- if (sm_readl(sm, PM_MCCTRL) & SM_BIT(PLLSEL))
-+ if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
- main_clock = &pll0;
-- else
-+ cpu_clk.parent = &pll0;
-+ } else {
- main_clock = &osc0;
-+ cpu_clk.parent = &osc0;
-+ }
-
-- if (sm_readl(sm, PM_PLL0) & SM_BIT(PLLOSC))
-+ if (pm_readl(PLL0) & PM_BIT(PLLOSC))
- pll0.parent = &osc1;
-- if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
-+ if (pm_readl(PLL1) & PM_BIT(PLLOSC))
- pll1.parent = &osc1;
-
- genclk_init_parent(&gclk0);
-@@ -1133,6 +1529,7 @@
- genclk_init_parent(&gclk3);
- genclk_init_parent(&gclk4);
- genclk_init_parent(&atmel_lcdfb0_pixclk);
-+ genclk_init_parent(&abdac0_sample_clk);
-
- /*
- * Turn on all clocks that have at least one user already, and
-@@ -1157,8 +1554,8 @@
- pbb_mask |= 1 << clk->index;
- }
-
-- sm_writel(sm, PM_CPU_MASK, cpu_mask);
-- sm_writel(sm, PM_HSB_MASK, hsb_mask);
-- sm_writel(sm, PM_PBA_MASK, pba_mask);
-- sm_writel(sm, PM_PBB_MASK, pbb_mask);
-+ pm_writel(CPU_MASK, cpu_mask);
-+ pm_writel(HSB_MASK, hsb_mask);
-+ pm_writel(PBA_MASK, pba_mask);
-+ pm_writel(PBB_MASK, pbb_mask);
- }
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c linux-avr32.git/arch/avr32/mach-at32ap/at32ap.c
---- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/mach-at32ap/at32ap.c 2007-07-12 13:59:49.000000000 +0200
-@@ -11,41 +11,10 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
-
--#include <asm/io.h>
--
- #include <asm/arch/init.h>
--#include <asm/arch/sm.h>
--
--struct at32_sm system_manager;
--
--static int __init at32_sm_init(void)
--{
-- struct resource *regs;
-- struct at32_sm *sm = &system_manager;
-- int ret = -ENXIO;
--
-- regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
-- if (!regs)
-- goto fail;
--
-- spin_lock_init(&sm->lock);
-- sm->pdev = &at32_sm_device;
--
-- ret = -ENOMEM;
-- sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
-- if (!sm->regs)
-- goto fail;
--
-- return 0;
--
--fail:
-- printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
-- return ret;
--}
-
- void __init setup_platform(void)
- {
-- at32_sm_init();
- at32_clock_init();
- at32_portmux_init();
- }
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c linux-avr32.git/arch/avr32/mach-at32ap/cpufreq.c
---- linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/mach-at32ap/cpufreq.c 2007-07-12 13:59:49.000000000 +0200
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2004-2007 Atmel Corporation
-+ *
-+ * Based on MIPS implementation arch/mips/kernel/time.c
-+ * Copyright 2001 MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
++static void pbb_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(PBB_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(PBB_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
+
-+/*#define DEBUG*/
++static unsigned long pbb_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
+
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/cpufreq.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <asm/system.h>
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(PBBDIV))
++ shift = PM_BFEXT(PBBSEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static struct clk cpu_clk = {
++ .name = "cpu",
++ .get_rate = cpu_clk_get_rate,
++ .set_rate = cpu_clk_set_rate,
++ .users = 1,
++};
++static struct clk hsb_clk = {
++ .name = "hsb",
++ .parent = &cpu_clk,
++ .get_rate = hsb_clk_get_rate,
++};
++static struct clk pba_clk = {
++ .name = "pba",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = pba_clk_get_rate,
++ .index = 1,
++};
++static struct clk pbb_clk = {
++ .name = "pbb",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .users = 1,
++ .index = 2,
++};
+
-+static struct clk *cpuclk;
++/* --------------------------------------------------------------------
++ * Generic Clock operations
++ * -------------------------------------------------------------------- */
+
-+static int at32_verify_speed(struct cpufreq_policy *policy)
++static void genclk_mode(struct clk *clk, int enabled)
+{
-+ if (policy->cpu != 0)
-+ return -EINVAL;
++ u32 control;
+
-+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-+ policy->cpuinfo.max_freq);
-+ return 0;
++ control = pm_readl(GCCTRL(clk->index));
++ if (enabled)
++ control |= PM_BIT(CEN);
++ else
++ control &= ~PM_BIT(CEN);
++ pm_writel(GCCTRL(clk->index), control);
+}
+
-+static unsigned int at32_get_speed(unsigned int cpu)
++static unsigned long genclk_get_rate(struct clk *clk)
+{
-+ /* No SMP support */
-+ if (cpu)
-+ return 0;
-+ return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
++ u32 control;
++ unsigned long div = 1;
++
++ control = pm_readl(GCCTRL(clk->index));
++ if (control & PM_BIT(DIVEN))
++ div = 2 * (PM_BFEXT(DIV, control) + 1);
++
++ return clk->parent->get_rate(clk->parent) / div;
+}
+
-+static int at32_set_target(struct cpufreq_policy *policy,
-+ unsigned int target_freq,
-+ unsigned int relation)
++static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
-+ struct cpufreq_freqs freqs;
-+ long freq;
++ u32 control;
++ unsigned long parent_rate, actual_rate, div;
++
++ parent_rate = clk->parent->get_rate(clk->parent);
++ control = pm_readl(GCCTRL(clk->index));
+
-+ /* Convert target_freq from kHz to Hz */
-+ freq = clk_round_rate(cpuclk, target_freq * 1000);
++ if (rate > 3 * parent_rate / 4) {
++ actual_rate = parent_rate;
++ control &= ~PM_BIT(DIVEN);
++ } else {
++ div = (parent_rate + rate) / (2 * rate) - 1;
++ control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
++ actual_rate = parent_rate / (2 * (div + 1));
++ }
+
-+ /* Check if policy->min <= new_freq <= policy->max */
-+ if(freq < (policy->min * 1000) || freq > (policy->max * 1000))
-+ return -EINVAL;
++ dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
++
++ if (apply)
++ pm_writel(GCCTRL(clk->index), control);
++
++ return actual_rate;
++}
+
-+ pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
++int genclk_set_parent(struct clk *clk, struct clk *parent)
++{
++ u32 control;
++
++ dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++ clk->name, parent->name, clk->parent->name);
++
++ control = pm_readl(GCCTRL(clk->index));
+
-+ freqs.old = at32_get_speed(0);
-+ freqs.new = (freq + 500) / 1000;
-+ freqs.cpu = 0;
-+ freqs.flags = 0;
++ if (parent == &osc1 || parent == &pll1)
++ control |= PM_BIT(OSCSEL);
++ else if (parent == &osc0 || parent == &pll0)
++ control &= ~PM_BIT(OSCSEL);
++ else
++ return -EINVAL;
+
-+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+ clk_set_rate(cpuclk, freq);
-+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++ if (parent == &pll0 || parent == &pll1)
++ control |= PM_BIT(PLLSEL);
++ else
++ control &= ~PM_BIT(PLLSEL);
+
-+ pr_debug("cpufreq: set frequency %lu Hz\n", freq);
++ pm_writel(GCCTRL(clk->index), control);
++ clk->parent = parent;
+
+ return 0;
+}
+
-+static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
++static void __init genclk_init_parent(struct clk *clk)
+{
-+ if (policy->cpu != 0)
-+ return -EINVAL;
-+
-+ cpuclk = clk_get(NULL, "cpu");
-+ if (IS_ERR(cpuclk)) {
-+ pr_debug("cpufreq: could not get CPU clk\n");
-+ return PTR_ERR(cpuclk);
-+ }
++ u32 control;
++ struct clk *parent;
+
-+ policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000;
-+ policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-+ policy->cpuinfo.transition_latency = 0;
-+ policy->cur = at32_get_speed(0);
-+ policy->min = policy->cpuinfo.min_freq;
-+ policy->max = policy->cpuinfo.max_freq;
-+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
++ BUG_ON(clk->index > 7);
+
-+ printk("cpufreq: AT32AP CPU frequency driver\n");
++ control = pm_readl(GCCTRL(clk->index));
++ if (control & PM_BIT(OSCSEL))
++ parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
++ else
++ parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+
-+ return 0;
++ clk->parent = parent;
+}
+
-+static struct cpufreq_driver at32_driver = {
-+ .name = "at32ap",
-+ .owner = THIS_MODULE,
-+ .init = at32_cpufreq_driver_init,
-+ .verify = at32_verify_speed,
-+ .target = at32_set_target,
-+ .get = at32_get_speed,
-+ .flags = CPUFREQ_STICKY,
++/* --------------------------------------------------------------------
++ * System peripherals
++ * -------------------------------------------------------------------- */
++static struct resource at32_pm0_resource[] = {
++ {
++ .start = 0xfff00000,
++ .end = 0xfff0007f,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(20),
++};
++
++static struct resource at32ap700x_rtc0_resource[] = {
++ {
++ .start = 0xfff00080,
++ .end = 0xfff000af,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(21),
++};
++
++static struct resource at32_wdt0_resource[] = {
++ {
++ .start = 0xfff000b0,
++ .end = 0xfff000cf,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct resource at32_eic0_resource[] = {
++ {
++ .start = 0xfff00100,
++ .end = 0xfff0013f,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(19),
+};
+
-+static int __init at32_cpufreq_init(void)
-+{
-+ return cpufreq_register_driver(&at32_driver);
-+}
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
+
-+arch_initcall(at32_cpufreq_init);
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c linux-avr32.git/arch/avr32/mach-at32ap/extint.c
---- linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/mach-at32ap/extint.c 2007-07-12 13:59:49.000000000 +0200
-@@ -17,42 +17,83 @@
-
- #include <asm/io.h>
-
--#include <asm/arch/sm.h>
--
--#include "sm.h"
-+/* EIC register offsets */
-+#define EIC_IER 0x0000
-+#define EIC_IDR 0x0004
-+#define EIC_IMR 0x0008
-+#define EIC_ISR 0x000c
-+#define EIC_ICR 0x0010
-+#define EIC_MODE 0x0014
-+#define EIC_EDGE 0x0018
-+#define EIC_LEVEL 0x001c
-+#define EIC_TEST 0x0020
-+#define EIC_NMIC 0x0024
-+
-+/* Bitfields in TEST */
-+#define EIC_TESTEN_OFFSET 31
-+#define EIC_TESTEN_SIZE 1
-+
-+/* Bitfields in NMIC */
-+#define EIC_EN_OFFSET 0
-+#define EIC_EN_SIZE 1
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
++ .name = "pclk",
++ .dev = &at32_pm0_device.dev,
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .users = 1,
++ .index = 0,
++};
+
-+/* Bit manipulation macros */
-+#define EIC_BIT(name) \
-+ (1 << EIC_##name##_OFFSET)
-+#define EIC_BF(name,value) \
-+ (((value) & ((1 << EIC_##name##_SIZE) - 1)) \
-+ << EIC_##name##_OFFSET)
-+#define EIC_BFEXT(name,value) \
-+ (((value) >> EIC_##name##_OFFSET) \
-+ & ((1 << EIC_##name##_SIZE) - 1))
-+#define EIC_BFINS(name,value,old) \
-+ (((old) & ~(((1 << EIC_##name##_SIZE) - 1) \
-+ << EIC_##name##_OFFSET)) \
-+ | EIC_BF(name,value))
++static struct resource intc0_resource[] = {
++ PBMEM(0xfff00400),
++};
++struct platform_device at32_intc0_device = {
++ .name = "intc",
++ .id = 0,
++ .resource = intc0_resource,
++ .num_resources = ARRAY_SIZE(intc0_resource),
++};
++DEV_CLK(pclk, at32_intc0, pbb, 1);
+
-+/* Register access macros */
-+#define eic_readl(port,reg) \
-+ __raw_readl((port)->regs + EIC_##reg)
-+#define eic_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + EIC_##reg)
++static struct clk ebi_clk = {
++ .name = "ebi",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .users = 1,
++};
++static struct clk hramc_clk = {
++ .name = "hramc",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .users = 1,
++ .index = 3,
++};
+
-+struct eic {
-+ void __iomem *regs;
-+ struct irq_chip *chip;
-+ unsigned int first_irq;
++static struct resource smc0_resource[] = {
++ PBMEM(0xfff03400),
+};
-
--static void eim_ack_irq(unsigned int irq)
-+static void eic_ack_irq(unsigned int irq)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-- sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
- }
-
--static void eim_mask_irq(unsigned int irq)
-+static void eic_mask_irq(unsigned int irq)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-- sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
- }
-
--static void eim_mask_ack_irq(unsigned int irq)
-+static void eic_mask_ack_irq(unsigned int irq)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-- sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
-- sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
- }
-
--static void eim_unmask_irq(unsigned int irq)
-+static void eic_unmask_irq(unsigned int irq)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-- sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq));
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, IER, 1 << (irq - eic->first_irq));
- }
-
--static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
-+static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-+ struct eic *eic = get_irq_chip_data(irq);
- struct irq_desc *desc;
-- unsigned int i = irq - sm->eim_first_irq;
-+ unsigned int i = irq - eic->first_irq;
- u32 mode, edge, level;
-- unsigned long flags;
- int ret = 0;
-
- flow_type &= IRQ_TYPE_SENSE_MASK;
-@@ -60,11 +101,10 @@
- flow_type = IRQ_TYPE_LEVEL_LOW;
-
- desc = &irq_desc[irq];
-- spin_lock_irqsave(&sm->lock, flags);
-
-- mode = sm_readl(sm, EIM_MODE);
-- edge = sm_readl(sm, EIM_EDGE);
-- level = sm_readl(sm, EIM_LEVEL);
-+ mode = eic_readl(eic, MODE);
-+ edge = eic_readl(eic, EDGE);
-+ level = eic_readl(eic, LEVEL);
-
- switch (flow_type) {
- case IRQ_TYPE_LEVEL_LOW:
-@@ -89,9 +129,9 @@
- }
-
- if (ret == 0) {
-- sm_writel(sm, EIM_MODE, mode);
-- sm_writel(sm, EIM_EDGE, edge);
-- sm_writel(sm, EIM_LEVEL, level);
-+ eic_writel(eic, MODE, mode);
-+ eic_writel(eic, EDGE, edge);
-+ eic_writel(eic, LEVEL, level);
-
- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
- flow_type |= IRQ_LEVEL;
-@@ -99,35 +139,33 @@
- desc->status |= flow_type;
- }
-
-- spin_unlock_irqrestore(&sm->lock, flags);
--
- return ret;
- }
-
--struct irq_chip eim_chip = {
-- .name = "eim",
-- .ack = eim_ack_irq,
-- .mask = eim_mask_irq,
-- .mask_ack = eim_mask_ack_irq,
-- .unmask = eim_unmask_irq,
-- .set_type = eim_set_irq_type,
-+struct irq_chip eic_chip = {
-+ .name = "eic",
-+ .ack = eic_ack_irq,
-+ .mask = eic_mask_irq,
-+ .mask_ack = eic_mask_ack_irq,
-+ .unmask = eic_unmask_irq,
-+ .set_type = eic_set_irq_type,
- };
-
--static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
-+static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
- {
-- struct at32_sm *sm = desc->handler_data;
-+ struct eic *eic = desc->handler_data;
- struct irq_desc *ext_desc;
- unsigned long status, pending;
- unsigned int i, ext_irq;
-
-- status = sm_readl(sm, EIM_ISR);
-- pending = status & sm_readl(sm, EIM_IMR);
-+ status = eic_readl(eic, ISR);
-+ pending = status & eic_readl(eic, IMR);
-
- while (pending) {
- i = fls(pending) - 1;
- pending &= ~(1 << i);
-
-- ext_irq = i + sm->eim_first_irq;
-+ ext_irq = i + eic->first_irq;
- ext_desc = irq_desc + ext_irq;
- if (ext_desc->status & IRQ_LEVEL)
- handle_level_irq(ext_irq, ext_desc);
-@@ -136,51 +174,85 @@
- }
- }
-
--static int __init eim_init(void)
-+static int __init eic_probe(struct platform_device *pdev)
- {
-- struct at32_sm *sm = &system_manager;
-+ struct eic *eic;
-+ struct resource *regs;
- unsigned int i;
- unsigned int nr_irqs;
- unsigned int int_irq;
-+ int ret;
- u32 pattern;
-
-- /*
-- * The EIM is really the same module as SM, so register
-- * mapping, etc. has been taken care of already.
-- */
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ int_irq = platform_get_irq(pdev, 0);
-+ if (!regs || !int_irq) {
-+ dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
-+ return -ENXIO;
-+ }
++DEFINE_DEV(smc, 0);
++DEV_CLK(pclk, smc0, pbb, 13);
++DEV_CLK(mck, smc0, hsb, 0);
+
-+ ret = -ENOMEM;
-+ eic = kzalloc(sizeof(struct eic), GFP_KERNEL);
-+ if (!eic) {
-+ dev_dbg(&pdev->dev, "no memory for eic structure\n");
-+ goto err_kzalloc;
-+ }
++static struct platform_device pdc_device = {
++ .name = "pdc",
++ .id = 0,
++};
++DEV_CLK(hclk, pdc, hsb, 4);
++DEV_CLK(pclk, pdc, pba, 16);
++
++static struct clk pico_clk = {
++ .name = "pico",
++ .parent = &cpu_clk,
++ .mode = cpu_clk_mode,
++ .get_rate = cpu_clk_get_rate,
++ .users = 1,
++};
+
-+ eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id;
-+ eic->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!eic->regs) {
-+ dev_dbg(&pdev->dev, "failed to map regs\n");
-+ goto err_ioremap;
-+ }
-
- /*
- * Find out how many interrupt lines that are actually
- * implemented in hardware.
- */
-- sm_writel(sm, EIM_IDR, ~0UL);
-- sm_writel(sm, EIM_MODE, ~0UL);
-- pattern = sm_readl(sm, EIM_MODE);
-+ eic_writel(eic, IDR, ~0UL);
-+ eic_writel(eic, MODE, ~0UL);
-+ pattern = eic_readl(eic, MODE);
- nr_irqs = fls(pattern);
-
- /* Trigger on falling edge unless overridden by driver */
-- sm_writel(sm, EIM_MODE, 0UL);
-- sm_writel(sm, EIM_EDGE, 0UL);
-+ eic_writel(eic, MODE, 0UL);
-+ eic_writel(eic, EDGE, 0UL);
-
-- sm->eim_chip = &eim_chip;
-+ eic->chip = &eic_chip;
-
- for (i = 0; i < nr_irqs; i++) {
- /* NOTE the handler we set here is ignored by the demux */
-- set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
-+ set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
- handle_level_irq);
-- set_irq_chip_data(sm->eim_first_irq + i, sm);
-+ set_irq_chip_data(eic->first_irq + i, eic);
- }
-
-- int_irq = platform_get_irq_byname(sm->pdev, "eim");
--
-- set_irq_chained_handler(int_irq, demux_eim_irq);
-- set_irq_data(int_irq, sm);
-+ set_irq_chained_handler(int_irq, demux_eic_irq);
-+ set_irq_data(int_irq, eic);
-
-- printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n",
-- sm->regs, int_irq);
-- printk("EIM: Handling %u external IRQs, starting with IRQ %u\n",
-- nr_irqs, sm->eim_first_irq);
-+ dev_info(&pdev->dev,
-+ "External Interrupt Controller at 0x%p, IRQ %u\n",
-+ eic->regs, int_irq);
-+ dev_info(&pdev->dev,
-+ "Handling %u external IRQs, starting with IRQ %u\n",
-+ nr_irqs, eic->first_irq);
-
- return 0;
++static struct resource dmaca0_resource[] = {
++ {
++ .start = 0xff200000,
++ .end = 0xff20ffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
+
-+err_ioremap:
-+ kfree(eic);
-+err_kzalloc:
-+ return ret;
-+}
++/* --------------------------------------------------------------------
++ * HMATRIX
++ * -------------------------------------------------------------------- */
+
-+static struct platform_driver eic_driver = {
-+ .driver = {
-+ .name = "at32_eic",
-+ },
++static struct clk hmatrix_clk = {
++ .name = "hmatrix_clk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 2,
++ .users = 1,
+};
++#define HMATRIX_BASE ((void __iomem *)0xfff00800)
++
++#define hmatrix_readl(reg) \
++ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
++#define hmatrix_writel(reg,value) \
++ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+
-+static int __init eic_init(void)
-+{
-+ return platform_driver_probe(&eic_driver, eic_probe);
- }
--arch_initcall(eim_init);
-+arch_initcall(eic_init);
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c linux-avr32.git/arch/avr32/mach-at32ap/gpio-dev.c
---- linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/mach-at32ap/gpio-dev.c 2007-07-12 13:59:49.000000000 +0200
-@@ -0,0 +1,570 @@
+/*
-+ * GPIO /dev and configfs interface
-+ *
-+ * Copyright (C) 2006-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * Set bits in the HMATRIX Special Function Register (SFR) used by the
++ * External Bus Interface (EBI). This can be used to enable special
++ * features like CompactFlash support, NAND Flash support, etc. on
++ * certain chipselects.
+ */
-+#include <linux/configfs.h>
-+#include <linux/cdev.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/wait.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/arch/portmux.h>
++static inline void set_ebi_sfr_bits(u32 mask)
++{
++ u32 sfr;
+
-+#define GPIO_DEV_MAX 8
++ clk_enable(&hmatrix_clk);
++ sfr = hmatrix_readl(SFR4);
++ sfr |= mask;
++ hmatrix_writel(SFR4, sfr);
++ clk_disable(&hmatrix_clk);
++}
+
-+static struct class *gpio_dev_class;
-+static dev_t gpio_devt;
++/* --------------------------------------------------------------------
++ * System Timer/Counter (TC)
++ * -------------------------------------------------------------------- */
++static struct resource at32_systc0_resource[] = {
++ PBMEM(0xfff00c00),
++ IRQ(22),
++};
++struct platform_device at32_systc0_device = {
++ .name = "systc",
++ .id = 0,
++ .resource = at32_systc0_resource,
++ .num_resources = ARRAY_SIZE(at32_systc0_resource),
++};
++DEV_CLK(pclk, at32_systc0, pbb, 3);
+
-+struct gpio_item {
-+ spinlock_t lock;
++/* --------------------------------------------------------------------
++ * PIO
++ * -------------------------------------------------------------------- */
+
-+ int enabled;
-+ int initialized;
-+ int port;
-+ u32 pin_mask;
-+ u32 oe_mask;
++static struct resource pio0_resource[] = {
++ PBMEM(0xffe02800),
++ IRQ(13),
++};
++DEFINE_DEV(pio, 0);
++DEV_CLK(mck, pio0, pba, 10);
+
-+ /* Pin state last time we read it (for blocking reads) */
-+ u32 pin_state;
-+ int changed;
++static struct resource pio1_resource[] = {
++ PBMEM(0xffe02c00),
++ IRQ(14),
++};
++DEFINE_DEV(pio, 1);
++DEV_CLK(mck, pio1, pba, 11);
+
-+ wait_queue_head_t change_wq;
-+ struct fasync_struct *async_queue;
++static struct resource pio2_resource[] = {
++ PBMEM(0xffe03000),
++ IRQ(15),
++};
++DEFINE_DEV(pio, 2);
++DEV_CLK(mck, pio2, pba, 12);
+
-+ int id;
-+ struct class_device *gpio_dev;
-+ struct cdev char_dev;
-+ struct config_item item;
++static struct resource pio3_resource[] = {
++ PBMEM(0xffe03400),
++ IRQ(16),
+};
++DEFINE_DEV(pio, 3);
++DEV_CLK(mck, pio3, pba, 13);
+
-+struct gpio_attribute {
-+ struct configfs_attribute attr;
-+ ssize_t (*show)(struct gpio_item *, char *);
-+ ssize_t (*store)(struct gpio_item *, const char *, size_t);
++static struct resource pio4_resource[] = {
++ PBMEM(0xffe03800),
++ IRQ(17),
+};
++DEFINE_DEV(pio, 4);
++DEV_CLK(mck, pio4, pba, 14);
+
-+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++void __init at32_add_system_devices(void)
+{
-+ struct gpio_item *gpio = dev_id;
-+ u32 old_state, new_state;
-+
-+ old_state = gpio->pin_state;
-+ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+ gpio->pin_state = new_state;
-+
-+ if (new_state != old_state) {
-+ gpio->changed = 1;
-+ wake_up_interruptible(&gpio->change_wq);
++ platform_device_register(&at32_pm0_device);
++ platform_device_register(&at32_intc0_device);
++ platform_device_register(&at32ap700x_rtc0_device);
++ platform_device_register(&at32_wdt0_device);
++ platform_device_register(&at32_eic0_device);
++ platform_device_register(&smc0_device);
++ platform_device_register(&pdc_device);
++ platform_device_register(&dmaca0_device);
+
-+ if (gpio->async_queue)
-+ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
-+ }
++ platform_device_register(&at32_systc0_device);
+
-+ return IRQ_HANDLED;
++ platform_device_register(&pio0_device);
++ platform_device_register(&pio1_device);
++ platform_device_register(&pio2_device);
++ platform_device_register(&pio3_device);
++ platform_device_register(&pio4_device);
+}
+
-+static int gpio_dev_open(struct inode *inode, struct file *file)
-+{
-+ struct gpio_item *gpio = container_of(inode->i_cdev,
-+ struct gpio_item,
-+ char_dev);
-+ unsigned int irq;
-+ unsigned int i;
-+ int ret;
-+
-+ nonseekable_open(inode, file);
-+ config_item_get(&gpio->item);
-+ file->private_data = gpio;
-+
-+ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
-+ gpio->pin_mask);
-+ gpio->changed = 1;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ ret = request_irq(irq, gpio_dev_interrupt, 0,
-+ "gpio-dev", gpio);
-+ if (ret)
-+ goto err_irq;
-+ }
-+ }
++/* --------------------------------------------------------------------
++ * USART
++ * -------------------------------------------------------------------- */
+
-+ return 0;
++static struct atmel_uart_data atmel_usart0_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart0_resource[] = {
++ PBMEM(0xffe00c00),
++ IRQ(6),
++};
++DEFINE_DEV_DATA(atmel_usart, 0);
++DEV_CLK(usart, atmel_usart0, pba, 3);
+
-+err_irq:
-+ while (i--) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
++static struct atmel_uart_data atmel_usart1_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart1_resource[] = {
++ PBMEM(0xffe01000),
++ IRQ(7),
++};
++DEFINE_DEV_DATA(atmel_usart, 1);
++DEV_CLK(usart, atmel_usart1, pba, 4);
+
-+ config_item_put(&gpio->item);
++static struct atmel_uart_data atmel_usart2_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart2_resource[] = {
++ PBMEM(0xffe01400),
++ IRQ(8),
++};
++DEFINE_DEV_DATA(atmel_usart, 2);
++DEV_CLK(usart, atmel_usart2, pba, 5);
+
-+ return ret;
++static struct atmel_uart_data atmel_usart3_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart3_resource[] = {
++ PBMEM(0xffe01800),
++ IRQ(9),
++};
++DEFINE_DEV_DATA(atmel_usart, 3);
++DEV_CLK(usart, atmel_usart3, pba, 6);
++
++static inline void configure_usart0_pins(void)
++{
++ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
++ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
+}
+
-+static int gpio_dev_fasync(int fd, struct file *file, int mode)
++static inline void configure_usart1_pins(void)
+{
-+ struct gpio_item *gpio = file->private_data;
++ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
++ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
++}
+
-+ return fasync_helper(fd, file, mode, &gpio->async_queue);
++static inline void configure_usart2_pins(void)
++{
++ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
++ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
+}
+
-+static int gpio_dev_release(struct inode *inode, struct file *file)
++static inline void configure_usart3_pins(void)
+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int irq;
-+ unsigned int i;
++ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
++ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
++}
+
-+ gpio_dev_fasync(-1, file, 0);
++static struct platform_device *__initdata at32_usarts[4];
+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ free_irq(irq, gpio);
-+ }
++void __init at32_map_usart(unsigned int hw_id, unsigned int line)
++{
++ struct platform_device *pdev;
++
++ switch (hw_id) {
++ case 0:
++ pdev = &atmel_usart0_device;
++ configure_usart0_pins();
++ break;
++ case 1:
++ pdev = &atmel_usart1_device;
++ configure_usart1_pins();
++ break;
++ case 2:
++ pdev = &atmel_usart2_device;
++ configure_usart2_pins();
++ break;
++ case 3:
++ pdev = &atmel_usart3_device;
++ configure_usart3_pins();
++ break;
++ default:
++ return;
+ }
+
-+ config_item_put(&gpio->item);
++ if (PXSEG(pdev->resource[0].start) == P4SEG) {
++ /* Addresses in the P4 segment are permanently mapped 1:1 */
++ struct atmel_uart_data *data = pdev->dev.platform_data;
++ data->regs = (void __iomem *)pdev->resource[0].start;
++ }
+
-+ return 0;
++ pdev->id = line;
++ at32_usarts[line] = pdev;
+}
+
-+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++struct platform_device *__init at32_add_device_usart(unsigned int id)
+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int mask = 0;
++ platform_device_register(at32_usarts[id]);
++ return at32_usarts[id];
++}
+
-+ poll_wait(file, &gpio->change_wq, wait);
-+ if (gpio->changed)
-+ mask |= POLLIN | POLLRDNORM;
++struct platform_device *atmel_default_console_device;
+
-+ return mask;
++void __init at32_setup_serial_console(unsigned int usart_id)
++{
++ atmel_default_console_device = at32_usarts[usart_id];
+}
+
-+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
-+ size_t count, loff_t *offset)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value;
++/* --------------------------------------------------------------------
++ * Ethernet
++ * -------------------------------------------------------------------- */
+
-+ spin_lock_irq(&gpio->lock);
-+ while (!gpio->changed) {
-+ spin_unlock_irq(&gpio->lock);
++#ifdef CONFIG_CPU_AT32AP7000
++static struct eth_platform_data macb0_data;
++static struct resource macb0_resource[] = {
++ PBMEM(0xfff01800),
++ IRQ(25),
++};
++DEFINE_DEV_DATA(macb, 0);
++DEV_CLK(hclk, macb0, hsb, 8);
++DEV_CLK(pclk, macb0, pbb, 6);
++
++static struct eth_platform_data macb1_data;
++static struct resource macb1_resource[] = {
++ PBMEM(0xfff01c00),
++ IRQ(26),
++};
++DEFINE_DEV_DATA(macb, 1);
++DEV_CLK(hclk, macb1, hsb, 9);
++DEV_CLK(pclk, macb1, pbb, 7);
+
-+ if (file->f_flags & O_NONBLOCK)
-+ return -EAGAIN;
++struct platform_device *__init
++at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
++{
++ struct platform_device *pdev;
+
-+ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
-+ return -ERESTARTSYS;
++ switch (id) {
++ case 0:
++ pdev = &macb0_device;
++
++ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
++ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
++ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
++ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
++ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
++ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
++ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
++ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
++ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
++ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
++
++ if (!data->is_rmii) {
++ select_peripheral(PC(0), PERIPH_A, 0); /* COL */
++ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
++ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
++ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
++ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
++ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
++ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
++ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
++ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
++ }
++ break;
+
-+ spin_lock_irq(&gpio->lock);
++ case 1:
++ pdev = &macb1_device;
++
++ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
++ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
++ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
++ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
++ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
++ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
++ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
++ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
++ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
++ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
++
++ if (!data->is_rmii) {
++ select_peripheral(PC(19), PERIPH_B, 0); /* COL */
++ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
++ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
++ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
++ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
++ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
++ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
++ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
++ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
++ }
++ break;
++
++ default:
++ return NULL;
+ }
+
-+ gpio->changed = 0;
-+ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++ memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
++ platform_device_register(pdev);
+
-+ spin_unlock_irq(&gpio->lock);
++ return pdev;
++}
++#endif
+
-+ count = min(count, (size_t)4);
-+ if (copy_to_user(buf, &value, count))
-+ return -EFAULT;
++/* --------------------------------------------------------------------
++ * SPI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_spi0_resource[] = {
++ PBMEM(0xffe00000),
++ IRQ(3),
++};
++DEFINE_DEV(atmel_spi, 0);
++DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+
-+ return count;
++static struct resource atmel_spi1_resource[] = {
++ PBMEM(0xffe00400),
++ IRQ(4),
++};
++DEFINE_DEV(atmel_spi, 1);
++DEV_CLK(spi_clk, atmel_spi1, pba, 1);
++
++static void __init
++at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
++ unsigned int n, const u8 *pins)
++{
++ unsigned int pin, mode;
++
++ for (; n; n--, b++) {
++ b->bus_num = bus_num;
++ if (b->chip_select >= 4)
++ continue;
++ pin = (unsigned)b->controller_data;
++ if (!pin) {
++ pin = pins[b->chip_select];
++ b->controller_data = (void *)pin;
++ }
++ mode = AT32_GPIOF_OUTPUT;
++ if (!(b->mode & SPI_CS_HIGH))
++ mode |= AT32_GPIOF_HIGH;
++ at32_select_gpio(pin, mode);
++ }
+}
+
-+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
-+ size_t count, loff_t *offset)
++struct platform_device *__init
++at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value = 0;
-+ u32 mask = ~0UL;
++ /*
++ * Manage the chipselects as GPIOs, normally using the same pins
++ * the SPI controller expects; but boards can use other pins.
++ */
++ static u8 __initdata spi0_pins[] =
++ { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
++ GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
++ static u8 __initdata spi1_pins[] =
++ { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
++ GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
++ struct platform_device *pdev;
+
-+ count = min(count, (size_t)4);
-+ if (copy_from_user(&value, buf, count))
-+ return -EFAULT;
++ switch (id) {
++ case 0:
++ pdev = &atmel_spi0_device;
++ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
++ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
++ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
++ at32_spi_setup_slaves(0, b, n, spi0_pins);
++ break;
+
-+ /* Assuming big endian */
-+ mask <<= (4 - count) * 8;
-+ mask &= gpio->pin_mask;
++ case 1:
++ pdev = &atmel_spi1_device;
++ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
++ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
++ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
++ at32_spi_setup_slaves(1, b, n, spi1_pins);
++ break;
+
-+ at32_gpio_set_value_multiple(gpio->port, value, mask);
++ default:
++ return NULL;
++ }
+
-+ return count;
++ spi_register_board_info(b, n);
++ platform_device_register(pdev);
++ return pdev;
+}
+
-+static struct file_operations gpio_dev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .open = gpio_dev_open,
-+ .release = gpio_dev_release,
-+ .fasync = gpio_dev_fasync,
-+ .poll = gpio_dev_poll,
-+ .read = gpio_dev_read,
-+ .write = gpio_dev_write,
++/* --------------------------------------------------------------------
++ * TWI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_twi0_resource[] __initdata = {
++ PBMEM(0xffe00800),
++ IRQ(5),
++};
++static struct clk atmel_twi0_pclk = {
++ .name = "twi_pclk",
++ .parent = &pba_clk,
++ .mode = pba_clk_mode,
++ .get_rate = pba_clk_get_rate,
++ .index = 2,
+};
+
-+static struct gpio_item *to_gpio_item(struct config_item *item)
++struct platform_device *__init at32_add_device_twi(unsigned int id)
+{
-+ return item ? container_of(item, struct gpio_item, item) : NULL;
-+}
++ struct platform_device *pdev;
+
-+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->port);
-+}
++ if (id != 0)
++ return NULL;
+
-+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ unsigned long id;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
++ pdev = platform_device_alloc("atmel_twi", id);
++ if (!pdev)
++ return NULL;
+
-+ id = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
++ if (platform_device_add_resources(pdev, atmel_twi0_resource,
++ ARRAY_SIZE(atmel_twi0_resource)))
++ goto err_add_resources;
+
-+ /* Switching PIO is not allowed when live... */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ ret = -ENXIO;
-+ if (at32_gpio_port_is_valid(id)) {
-+ gpio->port = id;
-+ ret = count;
-+ }
-+ }
-+ spin_unlock(&gpio->lock);
++ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
++ select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
+
-+ return ret;
-+}
++ atmel_twi0_pclk.dev = &pdev->dev;
+
-+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->pin_mask);
++ platform_device_add(pdev);
++ return pdev;
++
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
+}
+
-+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct resource atmel_mci0_resource[] __initdata = {
++ PBMEM(0xfff02400),
++ IRQ(28),
++};
++static struct clk atmel_mci0_pclk = {
++ .name = "mci_clk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 9,
++};
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
+{
-+ u32 new_mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
++ struct platform_device *pdev;
+
-+ new_mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
++ if (id != 0)
++ return NULL;
+
-+ /* Can't update the pin mask while live. */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask &= new_mask;
-+ gpio->pin_mask = new_mask;
-+ ret = count;
++ pdev = platform_device_alloc("atmel_mci", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_resources(pdev, atmel_mci0_resource,
++ ARRAY_SIZE(atmel_mci0_resource)))
++ goto fail;
++
++ if (data && platform_device_add_data(pdev, data,
++ sizeof(struct mci_platform_data)))
++ goto fail;
++
++ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
++ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
++ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
++
++ if (data) {
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, 0);
++ if (data->wp_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->wp_pin, 0);
+ }
-+ spin_unlock(&gpio->lock);
+
-+ return ret;
-+}
++ atmel_mci0_pclk.dev = &pdev->dev;
+
-+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->oe_mask);
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
+}
+
-+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
++/* --------------------------------------------------------------------
++ * LCDC
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++static struct atmel_lcdfb_info atmel_lcdfb0_data;
++static struct resource atmel_lcdfb0_resource[] = {
++ {
++ .start = 0xff000000,
++ .end = 0xff000fff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(1),
++ {
++ /* Placeholder for pre-allocated fb memory */
++ .start = 0x00000000,
++ .end = 0x00000000,
++ .flags = 0,
++ },
++};
++DEFINE_DEV_DATA(atmel_lcdfb, 0);
++DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
++static struct clk atmel_lcdfb0_pixclk = {
++ .name = "lcdc_clk",
++ .dev = &atmel_lcdfb0_device.dev,
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 7,
++};
++
++struct platform_device *__init
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++ unsigned long fbmem_start, unsigned long fbmem_len)
+{
-+ u32 mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
++ struct platform_device *pdev;
++ struct atmel_lcdfb_info *info;
++ struct fb_monspecs *monspecs;
++ struct fb_videomode *modedb;
++ unsigned int modedb_size;
++
++ /*
++ * Do a deep copy of the fb data, monspecs and modedb. Make
++ * sure all allocations are done before setting up the
++ * portmux.
++ */
++ monspecs = kmemdup(data->default_monspecs,
++ sizeof(struct fb_monspecs), GFP_KERNEL);
++ if (!monspecs)
++ return NULL;
+
-+ mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
++ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
++ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
++ if (!modedb)
++ goto err_dup_modedb;
++ monspecs->modedb = modedb;
+
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask = mask & gpio->pin_mask;
-+ ret = count;
++ switch (id) {
++ case 0:
++ pdev = &atmel_lcdfb0_device;
++ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
++ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
++ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
++ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
++ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
++ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
++ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
++ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
++ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
++ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
++ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
++ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
++ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
++ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
++ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
++ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
++ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
++ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
++ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
++ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
++ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
++ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
++ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
++ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
++ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
++ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
++ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
++ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
++
++ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
++ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
++ break;
++
++ default:
++ goto err_invalid_id;
+ }
-+ spin_unlock(&gpio->lock);
+
-+ return ret;
-+}
++ if (fbmem_len) {
++ pdev->resource[2].start = fbmem_start;
++ pdev->resource[2].end = fbmem_start + fbmem_len - 1;
++ pdev->resource[2].flags = IORESOURCE_MEM;
++ }
+
-+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->enabled);
++ info = pdev->dev.platform_data;
++ memcpy(info, data, sizeof(struct atmel_lcdfb_info));
++ info->default_monspecs = monspecs;
++
++ platform_device_register(pdev);
++ return pdev;
++
++err_invalid_id:
++ kfree(modedb);
++err_dup_modedb:
++ kfree(monspecs);
++ return NULL;
+}
++#endif
+
-+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
-+ const char *page, size_t count)
++/* --------------------------------------------------------------------
++ * PWM
++ * -------------------------------------------------------------------- */
++static struct resource atmel_pwm0_resource[] __initdata = {
++ PBMEM(0xfff01400),
++ IRQ(24),
++};
++static struct clk atmel_pwm0_mck = {
++ .name = "mck",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 5,
++};
++
++struct platform_device *__init at32_add_device_pwm(u32 mask)
+{
-+ char *p = (char *)page;
-+ int enabled;
-+ int ret;
++ struct platform_device *pdev;
+
-+ enabled = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
++ if (!mask)
++ return NULL;
+
-+ /* make it a boolean value */
-+ enabled = !!enabled;
++ pdev = platform_device_alloc("atmel_pwm", 0);
++ if (!pdev)
++ return NULL;
+
-+ if (gpio->enabled == enabled)
-+ /* No change; do nothing. */
-+ return count;
++ if (platform_device_add_resources(pdev, atmel_pwm0_resource,
++ ARRAY_SIZE(atmel_pwm0_resource)))
++ goto out_free_pdev;
+
-+ BUG_ON(gpio->id >= GPIO_DEV_MAX);
++ if (platform_device_add_data(pdev, &mask, sizeof(mask)))
++ goto out_free_pdev;
+
-+ if (!enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+ } else {
-+ if (gpio->port < 0 || !gpio->pin_mask)
-+ return -ENODEV;
-+ }
++ if (mask & (1 << 0))
++ select_peripheral(PA(28), PERIPH_A, 0);
++ if (mask & (1 << 1))
++ select_peripheral(PA(29), PERIPH_A, 0);
++ if (mask & (1 << 2))
++ select_peripheral(PA(21), PERIPH_B, 0);
++ if (mask & (1 << 3))
++ select_peripheral(PA(22), PERIPH_B, 0);
+
-+ /* Disallow any updates to gpio_id or pin_mask */
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = enabled;
-+ spin_unlock(&gpio->lock);
++ atmel_pwm0_mck.dev = &pdev->dev;
+
-+ if (!enabled)
-+ return count;
++ platform_device_add(pdev);
+
-+ /* Now, try to allocate the pins */
-+ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
-+ if (ret)
-+ goto err_alloc_pins;
++ return pdev;
+
-+ gpio->initialized = 1;
++out_free_pdev:
++ platform_device_put(pdev);
++ return NULL;
++}
+
-+ cdev_init(&gpio->char_dev, &gpio_dev_fops);
-+ gpio->char_dev.owner = THIS_MODULE;
-+ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
-+ if (ret < 0)
-+ goto err_cdev_add;
-+ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
-+ MKDEV(MAJOR(gpio_devt), gpio->id),
-+ NULL,
-+ "gpio%d", gpio->id);
-+ if (IS_ERR(gpio->gpio_dev)) {
-+ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
-+ ret = PTR_ERR(gpio->gpio_dev);
-+ goto err_class_dev;
-+ }
++/* --------------------------------------------------------------------
++ * SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++ PBMEM(0xffe01c00),
++ IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
+
-+ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
-+ gpio->id, gpio->port, gpio->pin_mask,
-+ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++static struct resource ssc1_resource[] = {
++ PBMEM(0xffe02000),
++ IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
+
-+ return 0;
++static struct resource ssc2_resource[] = {
++ PBMEM(0xffe02400),
++ IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
+
-+err_class_dev:
-+ cdev_del(&gpio->char_dev);
-+err_cdev_add:
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+err_alloc_pins:
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = 0;
-+ spin_unlock(&gpio->lock);
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++ struct platform_device *pdev;
+
-+ return ret;
++ switch (id) {
++ case 0:
++ pdev = &ssc0_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
++ break;
++ case 1:
++ pdev = &ssc1_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
++ break;
++ case 2:
++ pdev = &ssc2_device;
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
++ break;
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
+}
+
-+static struct gpio_attribute gpio_item_attr_gpio_id = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "gpio_id",
-+ .ca_mode = S_IRUGO | S_IWUSR,
++/* --------------------------------------------------------------------
++ * USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] __initdata = {
++ {
++ .start = 0xff300000,
++ .end = 0xff3fffff,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = 0xfff03000,
++ .end = 0xfff033ff,
++ .flags = IORESOURCE_MEM,
+ },
-+ .show = gpio_show_gpio_id,
-+ .store = gpio_store_gpio_id,
++ IRQ(31),
+};
-+static struct gpio_attribute gpio_item_attr_pin_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "pin_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_pin_mask,
-+ .store = gpio_store_pin_mask,
++static struct clk usba0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 12,
+};
-+static struct gpio_attribute gpio_item_attr_oe_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "oe_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
++static struct clk usba0_hclk = {
++ .name = "hclk",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .index = 6,
++};
++
++struct platform_device *__init
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_usba_udc", 0);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, usba0_resource,
++ ARRAY_SIZE(usba0_resource)))
++ goto out_free_pdev;
++
++ if (data) {
++ if (platform_device_add_data(pdev, data, sizeof(*data)))
++ goto out_free_pdev;
++
++ if (data->vbus_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->vbus_pin, 0);
++ }
++
++ usba0_pclk.dev = &pdev->dev;
++ usba0_hclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++
++ return pdev;
++
++out_free_pdev:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * IDE / CompactFlash
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
++static struct resource at32_smc_cs4_resource[] __initdata = {
++ {
++ .start = 0x04000000,
++ .end = 0x07ffffff,
++ .flags = IORESOURCE_MEM,
+ },
-+ .show = gpio_show_oe_mask,
-+ .store = gpio_store_oe_mask,
++ IRQ(~0UL), /* Magic IRQ will be overridden */
+};
-+static struct gpio_attribute gpio_item_attr_enabled = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "enabled",
-+ .ca_mode = S_IRUGO | S_IWUSR,
++static struct resource at32_smc_cs5_resource[] __initdata = {
++ {
++ .start = 0x20000000,
++ .end = 0x23ffffff,
++ .flags = IORESOURCE_MEM,
+ },
-+ .show = gpio_show_enabled,
-+ .store = gpio_store_enabled,
-+};
-+
-+static struct configfs_attribute *gpio_item_attrs[] = {
-+ &gpio_item_attr_gpio_id.attr,
-+ &gpio_item_attr_pin_mask.attr,
-+ &gpio_item_attr_oe_mask.attr,
-+ &gpio_item_attr_enabled.attr,
-+ NULL,
++ IRQ(~0UL), /* Magic IRQ will be overridden */
+};
+
-+static ssize_t gpio_show_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ char *page)
++static int __init at32_init_ide_or_cf(struct platform_device *pdev,
++ unsigned int cs, unsigned int extint)
+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = 0;
++ static unsigned int extint_pin_map[4] __initdata = {
++ GPIO_PIN_PB(25),
++ GPIO_PIN_PB(26),
++ GPIO_PIN_PB(27),
++ GPIO_PIN_PB(28),
++ };
++ static bool common_pins_initialized __initdata = false;
++ unsigned int extint_pin;
++ int ret;
+
-+ if (gpio_attr->show)
-+ ret = gpio_attr->show(gpio_item, page);
-+ return ret;
++ if (extint >= ARRAY_SIZE(extint_pin_map))
++ return -EINVAL;
++ extint_pin = extint_pin_map[extint];
++
++ switch (cs) {
++ case 4:
++ ret = platform_device_add_resources(pdev,
++ at32_smc_cs4_resource,
++ ARRAY_SIZE(at32_smc_cs4_resource));
++ if (ret)
++ return ret;
++
++ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
++ set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
++ break;
++ case 5:
++ ret = platform_device_add_resources(pdev,
++ at32_smc_cs5_resource,
++ ARRAY_SIZE(at32_smc_cs5_resource));
++ if (ret)
++ return ret;
++
++ select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
++ set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (!common_pins_initialized) {
++ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
++ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
++ select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
++ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
++ common_pins_initialized = true;
++ }
++
++ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
++
++ pdev->resource[1].start = EIM_IRQ_BASE + extint;
++ pdev->resource[1].end = pdev->resource[1].start;
++
++ return 0;
+}
+
-+static ssize_t gpio_store_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ const char *page, size_t count)
++struct platform_device *__init
++at32_add_device_ide(unsigned int id, unsigned int extint,
++ struct ide_platform_data *data)
+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = -EINVAL;
++ struct platform_device *pdev;
+
-+ if (gpio_attr->store)
-+ ret = gpio_attr->store(gpio_item, page, count);
-+ return ret;
++ pdev = platform_device_alloc("at32_ide", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct ide_platform_data)))
++ goto fail;
++
++ if (at32_init_ide_or_cf(pdev, data->cs, extint))
++ goto fail;
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
+}
+
-+static void gpio_release(struct config_item *item)
++struct platform_device *__init
++at32_add_device_cf(unsigned int id, unsigned int extint,
++ struct cf_platform_data *data)
+{
-+ kfree(to_gpio_item(item));
++ struct platform_device *pdev;
++
++ pdev = platform_device_alloc("at32_cf", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct cf_platform_data)))
++ goto fail;
++
++ if (at32_init_ide_or_cf(pdev, data->cs, extint))
++ goto fail;
++
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
++ if (data->reset_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->reset_pin, 0);
++ if (data->vcc_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->vcc_pin, 0);
++ /* READY is used as extint, so we can't select it as gpio */
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
+}
++#endif
+
-+static struct configfs_item_operations gpio_item_ops = {
-+ .release = gpio_release,
-+ .show_attribute = gpio_show_attr,
-+ .store_attribute = gpio_store_attr,
++/* --------------------------------------------------------------------
++ * AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] __initdata = {
++ PBMEM(0xfff02800),
++ IRQ(29),
+};
-+
-+static struct config_item_type gpio_item_type = {
-+ .ct_item_ops = &gpio_item_ops,
-+ .ct_attrs = gpio_item_attrs,
-+ .ct_owner = THIS_MODULE,
++static struct clk atmel_ac97c0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 10,
+};
+
-+static struct config_item *gpio_make_item(struct config_group *group,
-+ const char *name)
++struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+{
-+ static int next_id;
-+ struct gpio_item *gpio;
++ struct platform_device *pdev;
+
-+ if (next_id >= GPIO_DEV_MAX)
++ if (id != 0)
+ return NULL;
+
-+ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
-+ if (!gpio)
++ pdev = platform_device_alloc("atmel_ac97c", id);
++ if (!pdev)
+ return NULL;
+
-+ gpio->id = next_id++;
-+ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
-+ spin_lock_init(&gpio->lock);
-+ init_waitqueue_head(&gpio->change_wq);
++ if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
++ ARRAY_SIZE(atmel_ac97c0_resource)))
++ goto err_add_resources;
+
-+ return &gpio->item;
-+}
++ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
++ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
++ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
++ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
+
-+static void gpio_drop_item(struct config_group *group,
-+ struct config_item *item)
-+{
-+ struct gpio_item *gpio = to_gpio_item(item);
++ atmel_ac97c0_pclk.dev = &pdev->dev;
+
-+ spin_lock(&gpio->lock);
-+ if (gpio->enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ }
++ platform_device_add(pdev);
++ return pdev;
+
-+ if (gpio->initialized) {
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+ gpio->enabled = 0;
-+ }
-+ spin_unlock(&gpio->lock);
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
+}
+
-+static struct configfs_group_operations gpio_group_ops = {
-+ .make_item = gpio_make_item,
-+ .drop_item = gpio_drop_item,
++/* --------------------------------------------------------------------
++ * ABDAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] __initdata = {
++ PBMEM(0xfff02000),
++ IRQ(27),
+};
-+
-+static struct config_item_type gpio_group_type = {
-+ .ct_group_ops = &gpio_group_ops,
-+ .ct_owner = THIS_MODULE,
++static struct clk abdac0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 8,
+};
-+
-+static struct configfs_subsystem gpio_subsys = {
-+ .su_group = {
-+ .cg_item = {
-+ .ci_namebuf = "gpio",
-+ .ci_type = &gpio_group_type,
-+ },
-+ },
++static struct clk abdac0_sample_clk = {
++ .name = "sample_clk",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 6,
+};
+
-+static int __init gpio_dev_init(void)
++struct platform_device *__init at32_add_device_abdac(unsigned int id)
+{
-+ int err;
++ struct platform_device *pdev;
+
-+ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
-+ if (IS_ERR(gpio_dev_class)) {
-+ err = PTR_ERR(gpio_dev_class);
-+ goto err_class_create;
-+ }
++ if (id != 0)
++ return NULL;
+
-+ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
-+ if (err < 0)
-+ goto err_alloc_chrdev;
++ pdev = platform_device_alloc("abdac", id);
++ if (!pdev)
++ return NULL;
+
-+ /* Configfs initialization */
-+ config_group_init(&gpio_subsys.su_group);
-+ init_MUTEX(&gpio_subsys.su_sem);
-+ err = configfs_register_subsystem(&gpio_subsys);
-+ if (err)
-+ goto err_register_subsys;
++ if (platform_device_add_resources(pdev, abdac0_resource,
++ ARRAY_SIZE(abdac0_resource)))
++ goto err_add_resources;
+
-+ return 0;
++ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
++ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
+
-+err_register_subsys:
-+ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
-+err_alloc_chrdev:
-+ class_destroy(gpio_dev_class);
-+err_class_create:
-+ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
-+ return err;
++ abdac0_pclk.dev = &pdev->dev;
++ abdac0_sample_clk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
+}
-+late_initcall(gpio_dev_init);
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig linux-avr32.git/arch/avr32/mach-at32ap/Kconfig
---- linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/mach-at32ap/Kconfig 2007-07-12 13:59:49.000000000 +0200
-@@ -26,6 +26,13 @@
-
- endchoice
-
-+config GPIO_DEV
-+ bool "GPIO /dev interface"
-+ select CONFIGFS_FS
-+ default n
-+ help
-+ Say `Y' to enable a /dev interface to the GPIO pins.
+
- endmenu
-
- endif # PLATFORM_AT32AP
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile linux-avr32.git/arch/avr32/mach-at32ap/Makefile
---- linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/mach-at32ap/Makefile 2007-07-12 13:59:49.000000000 +0200
-@@ -1,3 +1,5 @@
- obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
- obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
-+obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
-+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c linux-avr32.git/arch/avr32/mach-at32ap/pio.c
---- linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/mach-at32ap/pio.c 2007-07-12 13:59:49.000000000 +0200
-@@ -158,6 +158,82 @@
- dump_stack();
- }
-
-+#ifdef CONFIG_GPIO_DEV
++/* --------------------------------------------------------------------
++ * GCLK
++ * -------------------------------------------------------------------- */
++static struct clk gclk0 = {
++ .name = "gclk0",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 0,
++};
++static struct clk gclk1 = {
++ .name = "gclk1",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 1,
++};
++static struct clk gclk2 = {
++ .name = "gclk2",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 2,
++};
++static struct clk gclk3 = {
++ .name = "gclk3",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 3,
++};
++static struct clk gclk4 = {
++ .name = "gclk4",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 4,
++};
+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port)
++struct clk *at32_clock_list[] = {
++ &osc32k,
++ &osc0,
++ &osc1,
++ &pll0,
++ &pll1,
++ &cpu_clk,
++ &hsb_clk,
++ &pba_clk,
++ &pbb_clk,
++ &at32_pm_pclk,
++ &at32_intc0_pclk,
++ &hmatrix_clk,
++ &ebi_clk,
++ &hramc_clk,
++ &smc0_pclk,
++ &smc0_mck,
++ &pdc_hclk,
++ &pdc_pclk,
++ &dmaca0_hclk,
++ &pico_clk,
++ &pio0_mck,
++ &pio1_mck,
++ &pio2_mck,
++ &pio3_mck,
++ &pio4_mck,
++ &at32_systc0_pclk,
++ &atmel_usart0_usart,
++ &atmel_usart1_usart,
++ &atmel_usart2_usart,
++ &atmel_usart3_usart,
++ &atmel_pwm0_mck,
++#if defined(CONFIG_CPU_AT32AP7000)
++ &macb0_hclk,
++ &macb0_pclk,
++ &macb1_hclk,
++ &macb1_pclk,
++#endif
++ &atmel_spi0_spi_clk,
++ &atmel_spi1_spi_clk,
++ &atmel_twi0_pclk,
++ &atmel_mci0_pclk,
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++ &atmel_lcdfb0_hck1,
++ &atmel_lcdfb0_pixclk,
++#endif
++ &ssc0_pclk,
++ &ssc1_pclk,
++ &ssc2_pclk,
++ &usba0_hclk,
++ &usba0_pclk,
++ &atmel_ac97c0_pclk,
++ &abdac0_pclk,
++ &abdac0_sample_clk,
++ &gclk0,
++ &gclk1,
++ &gclk2,
++ &gclk3,
++ &gclk4,
++};
++unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
++
++void __init at32_portmux_init(void)
+{
-+ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++ at32_init_pio(&pio0_device);
++ at32_init_pio(&pio1_device);
++ at32_init_pio(&pio2_device);
++ at32_init_pio(&pio3_device);
++ at32_init_pio(&pio4_device);
+}
+
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++void __init at32_clock_init(void)
+{
-+ struct pio_device *pio;
-+ u32 old, new;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
-+
-+ /* Try to allocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ if (old & pins)
-+ return -EBUSY;
-+
-+ new = old | pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++ u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
++ int i;
+
-+ /* That went well, now configure the port */
-+ pio_writel(pio, OER, oe_mask);
-+ pio_writel(pio, PER, pins);
++ if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
++ main_clock = &pll0;
++ cpu_clk.parent = &pll0;
++ } else {
++ main_clock = &osc0;
++ cpu_clk.parent = &osc0;
++ }
+
-+ return 0;
-+}
++ if (pm_readl(PLL0) & PM_BIT(PLLOSC))
++ pll0.parent = &osc1;
++ if (pm_readl(PLL1) & PM_BIT(PLLOSC))
++ pll1.parent = &osc1;
++
++ genclk_init_parent(&gclk0);
++ genclk_init_parent(&gclk1);
++ genclk_init_parent(&gclk2);
++ genclk_init_parent(&gclk3);
++ genclk_init_parent(&gclk4);
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++ genclk_init_parent(&atmel_lcdfb0_pixclk);
++#endif
++ genclk_init_parent(&abdac0_sample_clk);
+
-+void at32_deselect_pins(unsigned int port, u32 pins)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
++ /*
++ * Turn on all clocks that have at least one user already, and
++ * turn off everything else. We only do this for module
++ * clocks, and even though it isn't particularly pretty to
++ * check the address of the mode function, it should do the
++ * trick...
++ */
++ for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
++ struct clk *clk = at32_clock_list[i];
+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++ if (clk->users == 0)
++ continue;
+
-+ /* Return to a "safe" mux configuration */
-+ pio_writel(pio, PUER, pins);
-+ pio_writel(pio, ODR, pins);
++ if (clk->mode == &cpu_clk_mode)
++ cpu_mask |= 1 << clk->index;
++ else if (clk->mode == &hsb_clk_mode)
++ hsb_mask |= 1 << clk->index;
++ else if (clk->mode == &pba_clk_mode)
++ pba_mask |= 1 << clk->index;
++ else if (clk->mode == &pbb_clk_mode)
++ pbb_mask |= 1 << clk->index;
++ }
+
-+ /* Deallocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ new = old & ~pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++ pm_writel(CPU_MASK, cpu_mask);
++ pm_writel(HSB_MASK, hsb_mask);
++ pm_writel(PBA_MASK, pba_mask);
++ pm_writel(PBB_MASK, pbb_mask);
+}
+diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
+index f5bfd4c..c36a6d5 100644
+--- a/arch/avr32/mach-at32ap/extint.c
++++ b/arch/avr32/mach-at32ap/extint.c
+@@ -26,16 +26,10 @@
+ #define EIC_MODE 0x0014
+ #define EIC_EDGE 0x0018
+ #define EIC_LEVEL 0x001c
+-#define EIC_TEST 0x0020
+ #define EIC_NMIC 0x0024
+
+-/* Bitfields in TEST */
+-#define EIC_TESTEN_OFFSET 31
+-#define EIC_TESTEN_SIZE 1
+-
+ /* Bitfields in NMIC */
+-#define EIC_EN_OFFSET 0
+-#define EIC_EN_SIZE 1
++#define EIC_NMIC_ENABLE (1 << 0)
+
+ /* Bit manipulation macros */
+ #define EIC_BIT(name) \
+@@ -63,6 +57,9 @@ struct eic {
+ unsigned int first_irq;
+ };
+
++static struct eic *nmi_eic;
++static bool nmi_enabled;
+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
+ static void eic_ack_irq(unsigned int irq)
+ {
+ struct eic *eic = get_irq_chip_data(irq);
+@@ -133,8 +130,11 @@ static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
+ eic_writel(eic, EDGE, edge);
+ eic_writel(eic, LEVEL, level);
+
+- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
++ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+ flow_type |= IRQ_LEVEL;
++ __set_irq_handler_unlocked(irq, handle_level_irq);
++ } else
++ __set_irq_handler_unlocked(irq, handle_edge_irq);
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type;
+ }
+@@ -154,9 +154,8 @@ static struct irq_chip eic_chip = {
+ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ {
+ struct eic *eic = desc->handler_data;
+- struct irq_desc *ext_desc;
+ unsigned long status, pending;
+- unsigned int i, ext_irq;
++ unsigned int i;
+
+ status = eic_readl(eic, ISR);
+ pending = status & eic_readl(eic, IMR);
+@@ -165,15 +164,28 @@ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ i = fls(pending) - 1;
+ pending &= ~(1 << i);
+
+- ext_irq = i + eic->first_irq;
+- ext_desc = irq_desc + ext_irq;
+- if (ext_desc->status & IRQ_LEVEL)
+- handle_level_irq(ext_irq, ext_desc);
+- else
+- handle_edge_irq(ext_irq, ext_desc);
++ generic_handle_irq(i + eic->first_irq);
+ }
+ }
+
++int nmi_enable(void)
+{
-+ struct pio_device *pio;
++ nmi_enabled = true;
+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++ if (nmi_eic)
++ eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
+
-+ return pio_readl(pio, PDSR) & pins;
++ return 0;
+}
+
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++void nmi_disable(void)
+{
-+ struct pio_device *pio;
++ if (nmi_eic)
++ eic_writel(nmi_eic, NMIC, 0);
+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ /* No atomic updates for now... */
-+ pio_writel(pio, CODR, ~value & mask);
-+ pio_writel(pio, SODR, value & mask);
++ nmi_enabled = false;
+}
+
-+#endif /* CONFIG_GPIO_DEV */
-+
-+
- /*--------------------------------------------------------------------------*/
+ static int __init eic_probe(struct platform_device *pdev)
+ {
+ struct eic *eic;
+@@ -214,14 +226,13 @@ static int __init eic_probe(struct platform_device *pdev)
+ pattern = eic_readl(eic, MODE);
+ nr_irqs = fls(pattern);
- /* GPIO API */
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h linux-avr32.git/arch/avr32/mach-at32ap/pm.h
---- linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/arch/avr32/mach-at32ap/pm.h 2007-07-12 13:59:49.000000000 +0200
-@@ -0,0 +1,112 @@
-+/*
-+ * Register definitions for the Power Manager (PM)
-+ */
-+#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
-+#define __ARCH_AVR32_MACH_AT32AP_PM_H__
-+
-+/* PM register offsets */
-+#define PM_MCCTRL 0x0000
-+#define PM_CKSEL 0x0004
-+#define PM_CPU_MASK 0x0008
-+#define PM_HSB_MASK 0x000c
-+#define PM_PBA_MASK 0x0010
-+#define PM_PBB_MASK 0x0014
-+#define PM_PLL0 0x0020
-+#define PM_PLL1 0x0024
-+#define PM_IER 0x0040
-+#define PM_IDR 0x0044
-+#define PM_IMR 0x0048
-+#define PM_ISR 0x004c
-+#define PM_ICR 0x0050
-+#define PM_GCCTRL(x) (0x0060 + 4 * (x))
-+#define PM_RCAUSE 0x00c0
-+
-+/* Bitfields in CKSEL */
-+#define PM_CPUSEL_OFFSET 0
-+#define PM_CPUSEL_SIZE 3
-+#define PM_CPUDIV_OFFSET 7
-+#define PM_CPUDIV_SIZE 1
-+#define PM_HSBSEL_OFFSET 8
-+#define PM_HSBSEL_SIZE 3
-+#define PM_HSBDIV_OFFSET 15
-+#define PM_HSBDIV_SIZE 1
-+#define PM_PBASEL_OFFSET 16
-+#define PM_PBASEL_SIZE 3
-+#define PM_PBADIV_OFFSET 23
-+#define PM_PBADIV_SIZE 1
-+#define PM_PBBSEL_OFFSET 24
-+#define PM_PBBSEL_SIZE 3
-+#define PM_PBBDIV_OFFSET 31
-+#define PM_PBBDIV_SIZE 1
-+
-+/* Bitfields in PLL0 */
-+#define PM_PLLEN_OFFSET 0
-+#define PM_PLLEN_SIZE 1
-+#define PM_PLLOSC_OFFSET 1
-+#define PM_PLLOSC_SIZE 1
-+#define PM_PLLOPT_OFFSET 2
-+#define PM_PLLOPT_SIZE 3
-+#define PM_PLLDIV_OFFSET 8
-+#define PM_PLLDIV_SIZE 8
-+#define PM_PLLMUL_OFFSET 16
-+#define PM_PLLMUL_SIZE 8
-+#define PM_PLLCOUNT_OFFSET 24
-+#define PM_PLLCOUNT_SIZE 6
-+#define PM_PLLTEST_OFFSET 31
-+#define PM_PLLTEST_SIZE 1
-+
-+/* Bitfields in ICR */
-+#define PM_LOCK0_OFFSET 0
-+#define PM_LOCK0_SIZE 1
-+#define PM_LOCK1_OFFSET 1
-+#define PM_LOCK1_SIZE 1
-+#define PM_WAKE_OFFSET 2
-+#define PM_WAKE_SIZE 1
-+#define PM_CKRDY_OFFSET 5
-+#define PM_CKRDY_SIZE 1
-+#define PM_MSKRDY_OFFSET 6
-+#define PM_MSKRDY_SIZE 1
-+
-+/* Bitfields in GCCTRL0 */
-+#define PM_OSCSEL_OFFSET 0
-+#define PM_OSCSEL_SIZE 1
-+#define PM_PLLSEL_OFFSET 1
-+#define PM_PLLSEL_SIZE 1
-+#define PM_CEN_OFFSET 2
-+#define PM_CEN_SIZE 1
-+#define PM_DIVEN_OFFSET 4
-+#define PM_DIVEN_SIZE 1
-+#define PM_DIV_OFFSET 8
-+#define PM_DIV_SIZE 8
-+
-+/* Bitfields in RCAUSE */
-+#define PM_POR_OFFSET 0
-+#define PM_POR_SIZE 1
-+#define PM_EXT_OFFSET 2
-+#define PM_EXT_SIZE 1
-+#define PM_WDT_OFFSET 3
-+#define PM_WDT_SIZE 1
-+#define PM_NTAE_OFFSET 4
-+#define PM_NTAE_SIZE 1
-+
-+/* Bit manipulation macros */
-+#define PM_BIT(name) \
-+ (1 << PM_##name##_OFFSET)
-+#define PM_BF(name,value) \
-+ (((value) & ((1 << PM_##name##_SIZE) - 1)) \
-+ << PM_##name##_OFFSET)
-+#define PM_BFEXT(name,value) \
-+ (((value) >> PM_##name##_OFFSET) \
-+ & ((1 << PM_##name##_SIZE) - 1))
-+#define PM_BFINS(name,value,old)\
-+ (((old) & ~(((1 << PM_##name##_SIZE) - 1) \
-+ << PM_##name##_OFFSET)) \
-+ | PM_BF(name,value))
-+
-+/* Register access macros */
-+#define pm_readl(reg) \
-+ __raw_readl((void __iomem *)AT32_PM_BASE + PM_##reg)
-+#define pm_writel(reg,value) \
-+ __raw_writel((value), (void __iomem *)AT32_PM_BASE + PM_##reg)
-+
-+#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h linux-avr32.git/arch/avr32/mach-at32ap/sm.h
---- linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/mach-at32ap/sm.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,242 +0,0 @@
--/*
-- * Register definitions for SM
-- *
-- * System Manager
-- */
--#ifndef __ASM_AVR32_SM_H__
--#define __ASM_AVR32_SM_H__
--
--/* SM register offsets */
--#define SM_PM_MCCTRL 0x0000
--#define SM_PM_CKSEL 0x0004
--#define SM_PM_CPU_MASK 0x0008
--#define SM_PM_HSB_MASK 0x000c
--#define SM_PM_PBA_MASK 0x0010
--#define SM_PM_PBB_MASK 0x0014
--#define SM_PM_PLL0 0x0020
--#define SM_PM_PLL1 0x0024
--#define SM_PM_VCTRL 0x0030
--#define SM_PM_VMREF 0x0034
--#define SM_PM_VMV 0x0038
--#define SM_PM_IER 0x0040
--#define SM_PM_IDR 0x0044
--#define SM_PM_IMR 0x0048
--#define SM_PM_ISR 0x004c
--#define SM_PM_ICR 0x0050
--#define SM_PM_GCCTRL 0x0060
--#define SM_RTC_CTRL 0x0080
--#define SM_RTC_VAL 0x0084
--#define SM_RTC_TOP 0x0088
--#define SM_RTC_IER 0x0090
--#define SM_RTC_IDR 0x0094
--#define SM_RTC_IMR 0x0098
--#define SM_RTC_ISR 0x009c
--#define SM_RTC_ICR 0x00a0
--#define SM_WDT_CTRL 0x00b0
--#define SM_WDT_CLR 0x00b4
--#define SM_WDT_EXT 0x00b8
--#define SM_RC_RCAUSE 0x00c0
--#define SM_EIM_IER 0x0100
--#define SM_EIM_IDR 0x0104
--#define SM_EIM_IMR 0x0108
--#define SM_EIM_ISR 0x010c
--#define SM_EIM_ICR 0x0110
--#define SM_EIM_MODE 0x0114
--#define SM_EIM_EDGE 0x0118
--#define SM_EIM_LEVEL 0x011c
--#define SM_EIM_TEST 0x0120
--#define SM_EIM_NMIC 0x0124
--
--/* Bitfields in PM_MCCTRL */
--
--/* Bitfields in PM_CKSEL */
--#define SM_CPUSEL_OFFSET 0
--#define SM_CPUSEL_SIZE 3
--#define SM_CPUDIV_OFFSET 7
--#define SM_CPUDIV_SIZE 1
--#define SM_HSBSEL_OFFSET 8
--#define SM_HSBSEL_SIZE 3
--#define SM_HSBDIV_OFFSET 15
--#define SM_HSBDIV_SIZE 1
--#define SM_PBASEL_OFFSET 16
--#define SM_PBASEL_SIZE 3
--#define SM_PBADIV_OFFSET 23
--#define SM_PBADIV_SIZE 1
--#define SM_PBBSEL_OFFSET 24
--#define SM_PBBSEL_SIZE 3
--#define SM_PBBDIV_OFFSET 31
--#define SM_PBBDIV_SIZE 1
--
--/* Bitfields in PM_CPU_MASK */
--
--/* Bitfields in PM_HSB_MASK */
--
--/* Bitfields in PM_PBA_MASK */
--
--/* Bitfields in PM_PBB_MASK */
--
--/* Bitfields in PM_PLL0 */
--#define SM_PLLEN_OFFSET 0
--#define SM_PLLEN_SIZE 1
--#define SM_PLLOSC_OFFSET 1
--#define SM_PLLOSC_SIZE 1
--#define SM_PLLOPT_OFFSET 2
--#define SM_PLLOPT_SIZE 3
--#define SM_PLLDIV_OFFSET 8
--#define SM_PLLDIV_SIZE 8
--#define SM_PLLMUL_OFFSET 16
--#define SM_PLLMUL_SIZE 8
--#define SM_PLLCOUNT_OFFSET 24
--#define SM_PLLCOUNT_SIZE 6
--#define SM_PLLTEST_OFFSET 31
--#define SM_PLLTEST_SIZE 1
--
--/* Bitfields in PM_PLL1 */
--
--/* Bitfields in PM_VCTRL */
--#define SM_VAUTO_OFFSET 0
--#define SM_VAUTO_SIZE 1
--#define SM_PM_VCTRL_VAL_OFFSET 8
--#define SM_PM_VCTRL_VAL_SIZE 7
--
--/* Bitfields in PM_VMREF */
--#define SM_REFSEL_OFFSET 0
--#define SM_REFSEL_SIZE 4
--
--/* Bitfields in PM_VMV */
--#define SM_PM_VMV_VAL_OFFSET 0
--#define SM_PM_VMV_VAL_SIZE 8
--
--/* Bitfields in PM_IER */
--
--/* Bitfields in PM_IDR */
--
--/* Bitfields in PM_IMR */
--
--/* Bitfields in PM_ISR */
--
--/* Bitfields in PM_ICR */
--#define SM_LOCK0_OFFSET 0
--#define SM_LOCK0_SIZE 1
--#define SM_LOCK1_OFFSET 1
--#define SM_LOCK1_SIZE 1
--#define SM_WAKE_OFFSET 2
--#define SM_WAKE_SIZE 1
--#define SM_VOK_OFFSET 3
--#define SM_VOK_SIZE 1
--#define SM_VMRDY_OFFSET 4
--#define SM_VMRDY_SIZE 1
--#define SM_CKRDY_OFFSET 5
--#define SM_CKRDY_SIZE 1
--
--/* Bitfields in PM_GCCTRL */
--#define SM_OSCSEL_OFFSET 0
--#define SM_OSCSEL_SIZE 1
--#define SM_PLLSEL_OFFSET 1
--#define SM_PLLSEL_SIZE 1
--#define SM_CEN_OFFSET 2
--#define SM_CEN_SIZE 1
--#define SM_CPC_OFFSET 3
--#define SM_CPC_SIZE 1
--#define SM_DIVEN_OFFSET 4
--#define SM_DIVEN_SIZE 1
--#define SM_DIV_OFFSET 8
--#define SM_DIV_SIZE 8
--
--/* Bitfields in RTC_CTRL */
--#define SM_PCLR_OFFSET 1
--#define SM_PCLR_SIZE 1
--#define SM_TOPEN_OFFSET 2
--#define SM_TOPEN_SIZE 1
--#define SM_CLKEN_OFFSET 3
--#define SM_CLKEN_SIZE 1
--#define SM_PSEL_OFFSET 8
--#define SM_PSEL_SIZE 16
--
--/* Bitfields in RTC_VAL */
--#define SM_RTC_VAL_VAL_OFFSET 0
--#define SM_RTC_VAL_VAL_SIZE 31
--
--/* Bitfields in RTC_TOP */
--#define SM_RTC_TOP_VAL_OFFSET 0
--#define SM_RTC_TOP_VAL_SIZE 32
--
--/* Bitfields in RTC_IER */
--
--/* Bitfields in RTC_IDR */
--
--/* Bitfields in RTC_IMR */
--
--/* Bitfields in RTC_ISR */
--
--/* Bitfields in RTC_ICR */
--#define SM_TOPI_OFFSET 0
--#define SM_TOPI_SIZE 1
--
--/* Bitfields in WDT_CTRL */
--#define SM_KEY_OFFSET 24
--#define SM_KEY_SIZE 8
--
--/* Bitfields in WDT_CLR */
--
--/* Bitfields in WDT_EXT */
--
--/* Bitfields in RC_RCAUSE */
--#define SM_POR_OFFSET 0
--#define SM_POR_SIZE 1
--#define SM_BOD_OFFSET 1
--#define SM_BOD_SIZE 1
--#define SM_EXT_OFFSET 2
--#define SM_EXT_SIZE 1
--#define SM_WDT_OFFSET 3
--#define SM_WDT_SIZE 1
--#define SM_NTAE_OFFSET 4
--#define SM_NTAE_SIZE 1
--#define SM_SERP_OFFSET 5
--#define SM_SERP_SIZE 1
--
--/* Bitfields in EIM_IER */
--
--/* Bitfields in EIM_IDR */
--
--/* Bitfields in EIM_IMR */
--
--/* Bitfields in EIM_ISR */
--
--/* Bitfields in EIM_ICR */
--
--/* Bitfields in EIM_MODE */
--
--/* Bitfields in EIM_EDGE */
--#define SM_INT0_OFFSET 0
--#define SM_INT0_SIZE 1
--#define SM_INT1_OFFSET 1
--#define SM_INT1_SIZE 1
--#define SM_INT2_OFFSET 2
--#define SM_INT2_SIZE 1
--#define SM_INT3_OFFSET 3
--#define SM_INT3_SIZE 1
--
--/* Bitfields in EIM_LEVEL */
--
--/* Bitfields in EIM_TEST */
--#define SM_TESTEN_OFFSET 31
--#define SM_TESTEN_SIZE 1
--
--/* Bitfields in EIM_NMIC */
--#define SM_EN_OFFSET 0
--#define SM_EN_SIZE 1
--
--/* Bit manipulation macros */
--#define SM_BIT(name) (1 << SM_##name##_OFFSET)
--#define SM_BF(name,value) (((value) & ((1 << SM_##name##_SIZE) - 1)) << SM_##name##_OFFSET)
--#define SM_BFEXT(name,value) (((value) >> SM_##name##_OFFSET) & ((1 << SM_##name##_SIZE) - 1))
--#define SM_BFINS(name,value,old) (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value))
--
--/* Register access macros */
--#define sm_readl(port,reg) \
-- __raw_readl((port)->regs + SM_##reg)
--#define sm_writel(port,reg,value) \
-- __raw_writel((value), (port)->regs + SM_##reg)
--
--#endif /* __ASM_AVR32_SM_H__ */
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/Makefile linux-avr32.git/arch/avr32/Makefile
---- linux-2.6.22.1/arch/avr32/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/Makefile 2007-06-06 11:33:46.000000000 +0200
-@@ -31,6 +31,7 @@
- core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
- core-y += arch/avr32/kernel/
- core-y += arch/avr32/mm/
-+drivers-y += arch/avr32/drivers/
- libs-y += arch/avr32/lib/
+- /* Trigger on falling edge unless overridden by driver */
+- eic_writel(eic, MODE, 0UL);
++ /* Trigger on low level unless overridden by driver */
+ eic_writel(eic, EDGE, 0UL);
++ eic_writel(eic, LEVEL, 0UL);
- archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
-diff -x .git -Nur linux-2.6.22.1/arch/avr32/mm/dma-coherent.c linux-avr32.git/arch/avr32/mm/dma-coherent.c
---- linux-2.6.22.1/arch/avr32/mm/dma-coherent.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/arch/avr32/mm/dma-coherent.c 2007-07-12 13:59:49.000000000 +0200
-@@ -41,6 +41,13 @@
- struct page *page, *free, *end;
- int order;
+ eic->chip = &eic_chip;
-+ /* Following is a work-around (a.k.a. hack) to prevent pages
-+ * with __GFP_COMP being passed to split_page() which cannot
-+ * handle them. The real problem is that this flag probably
-+ * should be 0 on AVR32 as it is not supported on this
-+ * platform--see CONFIG_HUGETLB_PAGE. */
-+ gfp &= ~(__GFP_COMP);
+ for (i = 0; i < nr_irqs; i++) {
+- /* NOTE the handler we set here is ignored by the demux */
+ set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
+ handle_level_irq);
+ set_irq_chip_data(eic->first_irq + i, eic);
+@@ -230,6 +241,16 @@ static int __init eic_probe(struct platform_device *pdev)
+ set_irq_chained_handler(int_irq, demux_eic_irq);
+ set_irq_data(int_irq, eic);
+
++ if (pdev->id == 0) {
++ nmi_eic = eic;
++ if (nmi_enabled)
++ /*
++ * Someone tried to enable NMI before we were
++ * ready. Do it now.
++ */
++ nmi_enable();
++ }
+
- size = PAGE_ALIGN(size);
- order = get_order(size);
-
-diff -x .git -Nur linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c linux-avr32.git/drivers/char/watchdog/at32ap700x_wdt.c
---- linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/char/watchdog/at32ap700x_wdt.c 2007-07-12 13:59:59.000000000 +0200
-@@ -0,0 +1,325 @@
+ dev_info(&pdev->dev,
+ "External Interrupt Controller at 0x%p, IRQ %u\n",
+ eic->regs, int_irq);
+diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
+new file mode 100644
+index 0000000..8cf6d11
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/gpio-dev.c
+@@ -0,0 +1,573 @@
+/*
-+ * Watchdog driver for Atmel AT32AP700X devices
++ * GPIO /dev and configfs interface
+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
++ * Copyright (C) 2006-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+
-+#include <linux/init.h>
+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/device.h>
+#include <linux/fs.h>
-+#include <linux/platform_device.h>
-+#include <linux/watchdog.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/poll.h>
+#include <linux/uaccess.h>
-+#include <linux/io.h>
++#include <linux/wait.h>
+
-+#define TIMEOUT_MIN 1
-+#define TIMEOUT_DEFAULT CONFIG_AT32AP700X_WDT_TIMEOUT
-+#define TIMEOUT_MAX 2
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
+
-+/* Watchdog registers and write/read macro */
-+#define WDT_CTRL 0x00
-+#define WDT_CTRL_EN 0
-+#define WDT_CTRL_PSEL 8
-+#define WDT_CTRL_KEY 24
++#define GPIO_DEV_MAX 8
+
-+#define WDT_CLR 0x04
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
+
-+#define WDT_BIT(name) (1 << WDT_##name)
-+#define WDT_BF(name,value) ((value) << WDT_##name)
++struct gpio_item {
++ spinlock_t lock;
+
-+#define wdt_readl(dev,reg) \
-+ __raw_readl((dev)->regs + WDT_##reg)
-+#define wdt_writel(dev,reg,value) \
-+ __raw_writel((value), (dev)->regs + WDT_##reg)
++ int enabled;
++ int initialized;
++ int port;
++ u32 pin_mask;
++ u32 oe_mask;
+
-+struct wdt_at32ap700x {
-+ void __iomem *regs;
-+ int timeout;
-+ int users;
-+ struct miscdevice miscdev;
-+};
++ /* Pin state last time we read it (for blocking reads) */
++ u32 pin_state;
++ int changed;
+
-+static struct wdt_at32ap700x *wdt;
++ wait_queue_head_t change_wq;
++ struct fasync_struct *async_queue;
+
-+/*
-+ * Disable the watchdog.
-+ */
-+static void inline at32_wdt_stop(void)
-+{
-+ unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-+ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-+}
++ int id;
++ struct class_device *gpio_dev;
++ struct cdev char_dev;
++ struct config_item item;
++};
+
-+/*
-+ * Enable and reset the watchdog.
-+ */
-+static void inline at32_wdt_start(void)
++struct gpio_attribute {
++ struct configfs_attribute attr;
++ ssize_t (*show)(struct gpio_item *, char *);
++ ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
+{
-+ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-+ unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
++ struct gpio_item *gpio = dev_id;
++ u32 old_state, new_state;
+
-+ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+ | WDT_BF(CTRL_PSEL, psel)
-+ | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+ | WDT_BF(CTRL_PSEL, psel)
-+ | WDT_BF(CTRL_KEY, 0xaa));
-+}
++ old_state = gpio->pin_state;
++ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++ gpio->pin_state = new_state;
+
-+/*
-+ * Pat the watchdog timer.
-+ */
-+static void inline at32_wdt_pat(void)
-+{
-+ wdt_writel(wdt, CLR, 0x42);
-+}
++ if (new_state != old_state) {
++ gpio->changed = 1;
++ wake_up_interruptible(&gpio->change_wq);
+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at32_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(1, &wdt->users))
-+ return -EBUSY;
++ if (gpio->async_queue)
++ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++ }
+
-+ at32_wdt_start();
-+ return nonseekable_open(inode, file);
++ return IRQ_HANDLED;
+}
+
-+/*
-+ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
-+ * the watchdog is also disabled.
-+ */
-+static int at32_wdt_close(struct inode *inode, struct file *file)
++static int gpio_dev_open(struct inode *inode, struct file *file)
+{
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+ at32_wdt_stop();
-+#endif
-+ clear_bit(1, &wdt->users);
-+ return 0;
-+}
++ struct gpio_item *gpio = container_of(inode->i_cdev,
++ struct gpio_item,
++ char_dev);
++ unsigned int irq;
++ unsigned int i;
++ int ret;
+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at32_wdt_settimeout(int time)
-+{
-+ /*
-+ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-+ * 2 ^ 16 allowing up to 2 seconds timeout.
-+ */
-+ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
-+ return -EINVAL;
++ nonseekable_open(inode, file);
++ config_item_get(&gpio->item);
++ file->private_data = gpio;
+
-+ /*
-+ * Set new watchdog time. It will be used when at32_wdt_start() is
-+ * called.
-+ */
-+ wdt->timeout = time;
-+ return 0;
-+}
++ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++ gpio->pin_mask);
++ gpio->changed = 1;
+
-+static struct watchdog_info at32_wdt_info = {
-+ .identity = "at32ap700x watchdog",
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ ret = request_irq(irq, gpio_dev_interrupt, 0,
++ "gpio-dev", gpio);
++ if (ret)
++ goto err_irq;
++ }
++ }
+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static int at32_wdt_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ int ret = -ENOTTY;
-+ int time;
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
++ return 0;
+
-+ switch (cmd) {
-+ case WDIOC_KEEPALIVE:
-+ at32_wdt_pat();
-+ ret = 0;
-+ break;
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user(argp, &at32_wdt_info,
-+ sizeof(at32_wdt_info)) ? -EFAULT : 0;
-+ break;
-+ case WDIOC_SETTIMEOUT:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ ret = at32_wdt_settimeout(time);
-+ if (ret)
-+ break;
-+ /* Enable new time value */
-+ at32_wdt_start();
-+ /* fall through */
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt->timeout, p);
-+ break;
-+ case WDIOC_GETSTATUS: /* fall through */
-+ case WDIOC_GETBOOTSTATUS:
-+ ret = put_user(0, p);
-+ break;
-+ case WDIOC_SETOPTIONS:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ if (time & WDIOS_DISABLECARD)
-+ at32_wdt_stop();
-+ if (time & WDIOS_ENABLECARD)
-+ at32_wdt_start();
-+ ret = 0;
-+ break;
++err_irq:
++ while (i--) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
+ }
+
++ config_item_put(&gpio->item);
++
+ return ret;
+}
+
-+static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len,
-+ loff_t *ppos)
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
+{
-+ at32_wdt_pat();
-+ return len;
-+}
++ struct gpio_item *gpio = file->private_data;
+
-+static const struct file_operations at32_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .ioctl = at32_wdt_ioctl,
-+ .open = at32_wdt_open,
-+ .release = at32_wdt_close,
-+ .write = at32_wdt_write,
-+};
++ return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
+
-+static int __init at32_wdt_probe(struct platform_device *pdev)
++static int gpio_dev_release(struct inode *inode, struct file *file)
+{
-+ struct resource *regs;
-+ int ret;
-+
-+ if (wdt) {
-+ dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-+ return -EBUSY;
-+ }
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "missing mmio resource\n");
-+ return -ENXIO;
-+ }
-+
-+ wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
-+ if (!wdt) {
-+ dev_dbg(&pdev->dev, "no memory for wdt structure\n");
-+ return -ENOMEM;
-+ }
-+
-+ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!wdt->regs) {
-+ ret = -ENOMEM;
-+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+ goto err_free;
-+ }
-+ wdt->users = 0;
-+ wdt->miscdev.minor = WATCHDOG_MINOR;
-+ wdt->miscdev.name = "watchdog";
-+ wdt->miscdev.fops = &at32_wdt_fops;
++ struct gpio_item *gpio = file->private_data;
++ unsigned int irq;
++ unsigned int i;
+
-+ if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
-+ at32_wdt_settimeout(TIMEOUT_MAX);
-+ dev_dbg(&pdev->dev,
-+ "default timeout invalid, set to %d sec.\n",
-+ TIMEOUT_MAX);
-+ }
++ gpio_dev_fasync(-1, file, 0);
+
-+ ret = misc_register(&wdt->miscdev);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-+ goto err_iounmap;
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
+ }
+
-+ platform_set_drvdata(pdev, wdt);
-+ wdt->miscdev.parent = &pdev->dev;
-+ dev_info(&pdev->dev, "AT32AP700X WDT at 0x%p\n", wdt->regs);
++ config_item_put(&gpio->item);
+
+ return 0;
-+
-+err_iounmap:
-+ iounmap(wdt->regs);
-+err_free:
-+ kfree(wdt);
-+ wdt = NULL;
-+ return ret;
+}
+
-+static int __exit at32_wdt_remove(struct platform_device *pdev)
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
+{
-+ if (wdt && platform_get_drvdata(pdev) == wdt) {
-+ misc_deregister(&wdt->miscdev);
-+ iounmap(wdt->regs);
-+ kfree(wdt);
-+ wdt = NULL;
-+ platform_set_drvdata(pdev, NULL);
-+ }
-+
-+ return 0;
-+}
++ struct gpio_item *gpio = file->private_data;
++ unsigned int mask = 0;
+
-+static void at32_wdt_shutdown(struct platform_device *pdev)
-+{
-+ at32_wdt_stop();
-+}
++ poll_wait(file, &gpio->change_wq, wait);
++ if (gpio->changed)
++ mask |= POLLIN | POLLRDNORM;
+
-+#ifdef CONFIG_PM
-+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+ at32_wdt_stop();
-+ return 0;
++ return mask;
+}
+
-+static int at32_wdt_resume(struct platform_device *pdev)
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++ size_t count, loff_t *offset)
+{
-+ if (wdt->users)
-+ at32_wdt_start();
-+ return 0;
-+}
-+#else
-+#define at32_wdt_suspend NULL
-+#define at32_wdt_resume NULL
-+#endif
++ struct gpio_item *gpio = file->private_data;
++ u32 value;
+
-+static struct platform_driver at32_wdt_driver = {
-+ .remove = __exit_p(at32_wdt_remove),
-+ .suspend = at32_wdt_suspend,
-+ .resume = at32_wdt_resume,
-+ .driver = {
-+ .name = "at32_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+ .shutdown = at32_wdt_shutdown,
-+};
++ spin_lock_irq(&gpio->lock);
++ while (!gpio->changed) {
++ spin_unlock_irq(&gpio->lock);
+
-+static int __init at32_wdt_init(void)
-+{
-+ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
-+}
-+module_init(at32_wdt_init);
++ if (file->f_flags & O_NONBLOCK)
++ return -EAGAIN;
+
-+static void __exit at32_wdt_exit(void)
-+{
-+ platform_driver_unregister(&at32_wdt_driver);
-+}
-+module_exit(at32_wdt_exit);
++ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++ return -ERESTARTSYS;
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff -x .git -Nur linux-2.6.22.1/drivers/char/watchdog/Kconfig linux-avr32.git/drivers/char/watchdog/Kconfig
---- linux-2.6.22.1/drivers/char/watchdog/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/char/watchdog/Kconfig 2007-07-12 13:59:59.000000000 +0200
-@@ -187,6 +187,26 @@
-
- Say N if you are unsure.
-
-+# AVR32 Architecture
++ spin_lock_irq(&gpio->lock);
++ }
+
-+config AT32AP700X_WDT
-+ tristate "AT32AP700x watchdog"
-+ depends on WATCHDOG && CPU_AT32AP7000
-+ help
-+ Watchdog timer embedded into AT32AP700x devices. This will reboot
-+ your system when the timeout is reached.
-+
-+config AT32AP700X_WDT_TIMEOUT
-+ int "Timeout value for AT32AP700x watchdog"
-+ depends on AT32AP700X_WDT
-+ default "2"
-+ range 1 2
-+ help
-+ Sets the timeout value for the watchdog in AT32AP700x devices.
-+ Limited by hardware to be 1 or 2 seconds.
-+
-+ Set to 2 seconds by default.
-+
- # X86 (i386 + ia64 + x86_64) Architecture
-
- config ACQUIRE_WDT
-diff -x .git -Nur linux-2.6.22.1/drivers/char/watchdog/Makefile linux-avr32.git/drivers/char/watchdog/Makefile
---- linux-2.6.22.1/drivers/char/watchdog/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/char/watchdog/Makefile 2007-07-12 13:59:59.000000000 +0200
-@@ -36,6 +36,9 @@
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
-
-+# AVR32 Architecture
-+obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-+
- # X86 (i386 + ia64 + x86_64) Architecture
- obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
- obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h linux-avr32.git/drivers/i2c/busses/atmeltwi.h
---- linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/i2c/busses/atmeltwi.h 2007-06-06 11:33:51.000000000 +0200
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
++ gpio->changed = 0;
++ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
+
-+#ifndef __ASM_AVR32_TWI_H__
-+#define __ASM_AVR32_TWI_H__
++ spin_unlock_irq(&gpio->lock);
+
-+/* TWI register offsets */
-+#define TWI_CR 0x0000
-+#define TWI_MMR 0x0004
-+#define TWI_SMR 0x0008
-+#define TWI_IADR 0x000c
-+#define TWI_CWGR 0x0010
-+#define TWI_SR 0x0020
-+#define TWI_IER 0x0024
-+#define TWI_IDR 0x0028
-+#define TWI_IMR 0x002c
-+#define TWI_RHR 0x0030
-+#define TWI_THR 0x0034
++ count = min(count, (size_t)4);
++ if (copy_to_user(buf, &value, count))
++ return -EFAULT;
+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET 0
-+#define TWI_START_SIZE 1
-+#define TWI_STOP_OFFSET 1
-+#define TWI_STOP_SIZE 1
-+#define TWI_MSEN_OFFSET 2
-+#define TWI_MSEN_SIZE 1
-+#define TWI_MSDIS_OFFSET 3
-+#define TWI_MSDIS_SIZE 1
-+#define TWI_SVEN_OFFSET 4
-+#define TWI_SVEN_SIZE 1
-+#define TWI_SVDIS_OFFSET 5
-+#define TWI_SVDIS_SIZE 1
-+#define TWI_SWRST_OFFSET 7
-+#define TWI_SWRST_SIZE 1
++ return count;
++}
+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET 8
-+#define TWI_IADRSZ_SIZE 2
-+#define TWI_MREAD_OFFSET 12
-+#define TWI_MREAD_SIZE 1
-+#define TWI_DADR_OFFSET 16
-+#define TWI_DADR_SIZE 7
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value = 0;
++ u32 mask = ~0UL;
+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET 16
-+#define TWI_SADR_SIZE 7
++ count = min(count, (size_t)4);
++ if (copy_from_user(&value, buf, count))
++ return -EFAULT;
+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET 0
-+#define TWI_IADR_SIZE 24
++ /* Assuming big endian */
++ mask <<= (4 - count) * 8;
++ mask &= gpio->pin_mask;
+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET 0
-+#define TWI_CLDIV_SIZE 8
-+#define TWI_CHDIV_OFFSET 8
-+#define TWI_CHDIV_SIZE 8
-+#define TWI_CKDIV_OFFSET 16
-+#define TWI_CKDIV_SIZE 3
++ at32_gpio_set_value_multiple(gpio->port, value, mask);
+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET 0
-+#define TWI_TXCOMP_SIZE 1
-+#define TWI_RXRDY_OFFSET 1
-+#define TWI_RXRDY_SIZE 1
-+#define TWI_TXRDY_OFFSET 2
-+#define TWI_TXRDY_SIZE 1
-+#define TWI_SVDIR_OFFSET 3
-+#define TWI_SVDIR_SIZE 1
-+#define TWI_SVACC_OFFSET 4
-+#define TWI_SVACC_SIZE 1
-+#define TWI_GCACC_OFFSET 5
-+#define TWI_GCACC_SIZE 1
-+#define TWI_OVRE_OFFSET 6
-+#define TWI_OVRE_SIZE 1
-+#define TWI_UNRE_OFFSET 7
-+#define TWI_UNRE_SIZE 1
-+#define TWI_NACK_OFFSET 8
-+#define TWI_NACK_SIZE 1
-+#define TWI_ARBLST_OFFSET 9
-+#define TWI_ARBLST_SIZE 1
++ return count;
++}
+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET 0
-+#define TWI_RXDATA_SIZE 8
++static struct file_operations gpio_dev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .open = gpio_dev_open,
++ .release = gpio_dev_release,
++ .fasync = gpio_dev_fasync,
++ .poll = gpio_dev_poll,
++ .read = gpio_dev_read,
++ .write = gpio_dev_write,
++};
+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET 0
-+#define TWI_TXDATA_SIZE 8
++static struct gpio_item *to_gpio_item(struct config_item *item)
++{
++ return item ? container_of(item, struct gpio_item, item) : NULL;
++}
+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR 0
-+#define TWI_IADRSZ_ONE_BYTE 1
-+#define TWI_IADRSZ_TWO_BYTES 2
-+#define TWI_IADRSZ_THREE_BYTES 3
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->port);
++}
+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name) \
-+ (1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name,value) \
-+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
-+ << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name,value) \
-+ (((value) >> TWI_##name##_OFFSET) \
-+ & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
-+ << TWI_##name##_OFFSET)) \
-+ | TWI_BF(name,value))
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ unsigned long id;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
+
-+/* Register access macros */
-+#define twi_readl(port,reg) \
-+ __raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + TWI_##reg)
++ id = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+#endif /* __ASM_AVR32_TWI_H__ */
-diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.git/drivers/i2c/busses/i2c-atmeltwi.c
---- linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/i2c/busses/i2c-atmeltwi.c 2007-07-13 11:24:16.000000000 +0200
-@@ -0,0 +1,383 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes
-+ * <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
-+ * bugs removed, interrupt routine markedly rewritten
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
++ /* Switching PIO is not allowed when live... */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ ret = -ENXIO;
++ if (at32_gpio_port_is_valid(id)) {
++ gpio->port = id;
++ ret = count;
++ }
++ }
++ spin_unlock(&gpio->lock);
+
++ return ret;
++}
+
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <asm/io.h>
-+#include <linux/time.h>
-+#include "atmeltwi.h"
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
+
-+static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 new_mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
+
++ new_mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+struct atmel_twi {
-+ void __iomem *regs;
-+ struct i2c_adapter adapter;
-+ struct clk *pclk;
-+ spinlock_t lock;
-+ struct completion comp;
-+ u32 intmask;
-+ u8 *buf;
-+ u8 len;
-+ u8 acks_left;
-+ u8 nack;
-+ unsigned int irq;
++ /* Can't update the pin mask while live. */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask &= new_mask;
++ gpio->pin_mask = new_mask;
++ ret = count;
++ }
++ spin_unlock(&gpio->lock);
+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++ return ret;
++}
+
-+/*
-+ * Initialize the TWI hardware registers.
-+ */
-+static int __devinit twi_hwinit(struct atmel_twi *twi)
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
+{
-+ unsigned long cdiv, ckdiv=0;
++ return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
+
-+ twi_writel(twi, IDR, ~0UL);
-+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
-+ twi_readl(twi, SR);
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
+
-+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++ mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+ while (cdiv > 255) {
-+ ckdiv++;
-+ cdiv = cdiv >> 1;
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask = mask & gpio->pin_mask;
++ ret = count;
+ }
++ spin_unlock(&gpio->lock);
+
-+ if (ckdiv > 7)
-+ return -EINVAL;
-+ else
-+ twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
-+ | TWI_BF(CHDIV, cdiv)
-+ | TWI_BF(CLDIV, cdiv)));
-+ return 0;
++ return ret;
+}
+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out (~100ms).
-+ */
-+static short twi_complete(struct atmel_twi *twi, u32 mask)
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
+{
-+ int timeout = msecs_to_jiffies(100);
++ return sprintf(page, "%d\n", gpio->enabled);
++}
+
-+ twi->intmask = mask;
-+ init_completion(&twi->comp);
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ char *p = (char *)page;
++ int enabled;
++ int ret;
+
-+ twi_writel(twi, IER, mask);
++ enabled = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
-+ /* RESET TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(SWRST));
++ /* make it a boolean value */
++ enabled = !!enabled;
+
-+ /* Reinitialize TWI */
-+ twi_hwinit(twi);
++ if (gpio->enabled == enabled)
++ /* No change; do nothing. */
++ return count;
+
-+ return -ETIMEDOUT;
++ BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++ if (!enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ } else {
++ if (gpio->port < 0 || !gpio->pin_mask)
++ return -ENODEV;
+ }
-+ return 0;
-+}
+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-+{
-+ struct atmel_twi *twi = to_atmel_twi(adap);
-+ struct i2c_msg *pmsg;
-+ int i;
++ /* Disallow any updates to gpio_id or pin_mask */
++ spin_lock(&gpio->lock);
++ gpio->enabled = enabled;
++ spin_unlock(&gpio->lock);
+
-+ /* get first message */
-+ pmsg = msgs;
++ if (!enabled)
++ return count;
+
-+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++ /* Now, try to allocate the pins */
++ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
++ if (ret)
++ goto err_alloc_pins;
+
-+ twi->nack = 0;
-+ for (i = 0; i < num; i++, pmsg++) {
-+ twi->len = pmsg->len;
-+ twi->buf = pmsg->buf;
-+ twi->acks_left = pmsg->len;
-+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++ gpio->initialized = 1;
+
-+ dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
-+ i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+ pmsg->len > 1 ? "s" : "",
-+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++ cdev_init(&gpio->char_dev, &gpio_dev_fops);
++ gpio->char_dev.owner = THIS_MODULE;
++ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++ if (ret < 0)
++ goto err_cdev_add;
++ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++ MKDEV(MAJOR(gpio_devt), gpio->id),
++ NULL,
++ "gpio%d", gpio->id);
++ if (IS_ERR(gpio->gpio_dev)) {
++ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++ ret = PTR_ERR(gpio->gpio_dev);
++ goto err_class_dev;
++ }
+
-+ /* enable */
-+ twi_writel(twi, CR, TWI_BIT(MSEN));
++ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++ gpio->id, gpio->port, gpio->pin_mask,
++ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
+
-+ if (pmsg->flags & I2C_M_RD) {
-+ if (twi->len == 1)
-+ twi_writel(twi, CR,
-+ TWI_BIT(START) | TWI_BIT(STOP));
-+ else
-+ twi_writel(twi, CR, TWI_BIT(START));
++ return 0;
+
-+ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
-+ twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ } else {
-+ twi_writel(twi, THR, twi->buf[0]);
-+ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
-+ twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
++err_class_dev:
++ cdev_del(&gpio->char_dev);
++err_cdev_add:
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++err_alloc_pins:
++ spin_lock(&gpio->lock);
++ gpio->enabled = 0;
++ spin_unlock(&gpio->lock);
+
-+ if (twi->nack)
-+ return -ENODEV;
-+ }
++ return ret;
++}
+
-+ /* Disable TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_id",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_gpio_id,
++ .store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "pin_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_pin_mask,
++ .store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "oe_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_oe_mask,
++ .store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "enabled",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_enabled,
++ .store = gpio_store_enabled,
++};
+
-+ } /* end cur msg */
++static struct configfs_attribute *gpio_item_attrs[] = {
++ &gpio_item_attr_gpio_id.attr,
++ &gpio_item_attr_pin_mask.attr,
++ &gpio_item_attr_oe_mask.attr,
++ &gpio_item_attr_enabled.attr,
++ NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ char *page)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = 0;
+
-+ return i;
++ if (gpio_attr->show)
++ ret = gpio_attr->show(gpio_item, page);
++ return ret;
+}
+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
++static ssize_t gpio_store_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ const char *page, size_t count)
+{
-+ struct atmel_twi *twi = dev_id;
-+ int status = twi_readl(twi, SR);
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = -EINVAL;
+
-+ /* Save state for later debug prints */
-+ int old_mask = twi->intmask;
-+ int old_status = status;
++ if (gpio_attr->store)
++ ret = gpio_attr->store(gpio_item, page, count);
++ return ret;
++}
+
-+ if (twi->intmask & status) {
-+ if (status & TWI_BIT(NACK))
-+ goto nack;
++static void gpio_release(struct config_item *item)
++{
++ kfree(to_gpio_item(item));
++}
+
-+ status &= twi->intmask;
++static struct configfs_item_operations gpio_item_ops = {
++ .release = gpio_release,
++ .show_attribute = gpio_show_attr,
++ .store_attribute = gpio_store_attr,
++};
+
-+ if (status & TWI_BIT(TXCOMP))
-+ goto complete;
++static struct config_item_type gpio_item_type = {
++ .ct_item_ops = &gpio_item_ops,
++ .ct_attrs = gpio_item_attrs,
++ .ct_owner = THIS_MODULE,
++};
+
-+ else if (status & TWI_BIT(RXRDY)) {
-+ if ( twi->acks_left > 0 ) {
-+ twi->buf[twi->len - twi->acks_left] =
-+ twi_readl(twi, RHR);
-+ twi->acks_left--;
-+ }
-+ if ( twi->acks_left == 1 )
-+ twi_writel(twi, CR, TWI_BIT(STOP));
++static struct config_item *gpio_make_item(struct config_group *group,
++ const char *name)
++{
++ static int next_id;
++ struct gpio_item *gpio;
+
-+ if (twi->acks_left == 0 ) {
-+ twi->intmask = TWI_BIT(TXCOMP);
-+ twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+ }
-+ } else if (status & TWI_BIT(TXRDY)) {
-+ twi->acks_left--;
-+ if ( twi->acks_left == 0 ) {
-+ twi->intmask = TWI_BIT(TXCOMP);
-+ twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+ } else if (twi->acks_left > 0)
-+ twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
-+ }
-+ }
++ if (next_id >= GPIO_DEV_MAX)
++ return NULL;
+
-+ dev_dbg(&twi->adapter.dev,
-+ "TWI ISR, SR 0x%08X, intmask 0x%08X, acks_left %i.\n",
-+ old_status, old_mask, twi->acks_left);
++ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++ if (!gpio)
++ return NULL;
+
-+ return IRQ_HANDLED;
++ gpio->id = next_id++;
++ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++ spin_lock_init(&gpio->lock);
++ init_waitqueue_head(&gpio->change_wq);
+
-+nack:
-+ dev_dbg(&twi->adapter.dev, "NACK received!\n");
-+ twi->nack = 1;
++ return &gpio->item;
++}
+
-+complete:
-+ twi_writel(twi, IDR, ~0UL);
-+ complete(&twi->comp);
++static void gpio_drop_item(struct config_group *group,
++ struct config_item *item)
++{
++ struct gpio_item *gpio = to_gpio_item(item);
+
-+ dev_dbg(&twi->adapter.dev,
-+ "TWI ISR, SR 0x%08X, intmask 0x%08X, \
-+ acks_left %i - completed.\n",
-+ old_status, old_mask, twi->acks_left);
++ spin_lock(&gpio->lock);
++ if (gpio->enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ }
+
-+ return IRQ_HANDLED;
++ if (gpio->initialized) {
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ gpio->enabled = 0;
++ }
++ spin_unlock(&gpio->lock);
+}
+
++static struct configfs_group_operations gpio_group_ops = {
++ .make_item = gpio_make_item,
++ .drop_item = gpio_drop_item,
++};
+
-+/*
-+ * Return list of supported functionality.
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
++static struct config_item_type gpio_group_type = {
++ .ct_group_ops = &gpio_group_ops,
++ .ct_owner = THIS_MODULE,
++};
+
-+/* For now, we only handle combined mode (smbus) */
-+static struct i2c_algorithm twi_algorithm = {
-+ .master_xfer = twi_xfer,
-+ .functionality = twi_func,
++static struct configfs_subsystem gpio_subsys = {
++ .su_group = {
++ .cg_item = {
++ .ci_namebuf = "gpio",
++ .ci_type = &gpio_group_type,
++ },
++ },
+};
+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __devinit twi_probe(struct platform_device *pdev)
++static int __init gpio_dev_init(void)
+{
-+ struct atmel_twi *twi;
-+ struct resource *regs;
-+ struct clk *pclk;
-+ struct i2c_adapter *adapter;
-+ int rc, irq;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ clk_enable(pclk);
++ int err;
+
-+ rc = -ENOMEM;
-+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+ if (!twi) {
-+ dev_err(&pdev->dev, "can't allocate interface!\n");
-+ goto err_alloc_twi;
++ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++ if (IS_ERR(gpio_dev_class)) {
++ err = PTR_ERR(gpio_dev_class);
++ goto err_class_create;
+ }
+
-+ twi->pclk = pclk;
-+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!twi->regs)
-+ goto err_ioremap;
++ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++ if (err < 0)
++ goto err_alloc_chrdev;
+
-+ irq = platform_get_irq(pdev,0);
-+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "can't bind irq!\n");
-+ goto err_irq;
-+ }
-+ twi->irq = irq;
++ /* Configfs initialization */
++ config_group_init(&gpio_subsys.su_group);
++ mutex_init(&gpio_subsys.su_mutex);
++ err = configfs_register_subsystem(&gpio_subsys);
++ if (err)
++ goto err_register_subsys;
+
-+ rc = twi_hwinit(twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Unable to set baudrate\n");
-+ goto err_hw_init;
-+ }
++ return 0;
+
-+ adapter = &twi->adapter;
-+ sprintf(adapter->name, "TWI");
-+ adapter->algo = &twi_algorithm;
-+ adapter->class = I2C_CLASS_HWMON;
-+ adapter->dev.parent = &pdev->dev;
++err_register_subsys:
++ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++ class_destroy(gpio_dev_class);
++err_class_create:
++ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++ return err;
++}
++late_initcall(gpio_dev_init);
+diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
+index d61a02d..c978c36 100644
+--- a/arch/avr32/mach-at32ap/pio.c
++++ b/arch/avr32/mach-at32ap/pio.c
+@@ -162,6 +162,82 @@ fail:
+ dump_stack();
+ }
+
++#ifdef CONFIG_GPIO_DEV
+
-+ platform_set_drvdata(pdev, twi);
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
+
-+ rc = i2c_add_adapter(adapter);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Adapter %s registration failed\n",
-+ adapter->name);
-+ goto err_register;
-+ }
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++ struct pio_device *pio;
++ u32 old, new;
+
-+ dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
-+ baudrate/1000, (unsigned long)regs->start);
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
+
-+ return 0;
++ /* Try to allocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ if (old & pins)
++ return -EBUSY;
+
++ new = old | pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
+
-+err_register:
-+ platform_set_drvdata(pdev, NULL);
++ /* That went well, now configure the port */
++ pio_writel(pio, OER, oe_mask);
++ pio_writel(pio, PER, pins);
+
-+err_hw_init:
-+ free_irq(irq, twi);
++ return 0;
++}
+
-+err_irq:
-+ iounmap(twi->regs);
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++ u32 old, new;
+
-+err_ioremap:
-+ kfree(twi);
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
-+err_alloc_twi:
-+ clk_disable(pclk);
-+ clk_put(pclk);
++ /* Return to a "safe" mux configuration */
++ pio_writel(pio, PUER, pins);
++ pio_writel(pio, ODR, pins);
+
-+ return rc;
++ /* Deallocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ new = old & ~pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
+}
+
-+static int __devexit twi_remove(struct platform_device *pdev)
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
+{
-+ struct atmel_twi *twi = platform_get_drvdata(pdev);
-+ int res;
++ struct pio_device *pio;
+
-+ platform_set_drvdata(pdev, NULL);
-+ res = i2c_del_adapter(&twi->adapter);
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+ iounmap(twi->regs);
-+ clk_disable(twi->pclk);
-+ clk_put(twi->pclk);
-+ free_irq(twi->irq, twi);
-+ kfree(twi);
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
-+ return res;
++ return pio_readl(pio, PDSR) & pins;
+}
+
-+static struct platform_driver twi_driver = {
-+ .probe = twi_probe,
-+ .remove = __devexit_p(twi_remove),
-+ .driver = {
-+ .name = "atmel_twi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_twi_init(void)
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
+{
-+ return platform_driver_register(&twi_driver);
-+}
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
-+static void __exit atmel_twi_exit(void)
-+{
-+ platform_driver_unregister(&twi_driver);
++ /* No atomic updates for now... */
++ pio_writel(pio, CODR, ~value & mask);
++ pio_writel(pio, SODR, value & mask);
+}
+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
++#endif /* CONFIG_GPIO_DEV */
+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
-diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/Kconfig linux-avr32.git/drivers/i2c/busses/Kconfig
---- linux-2.6.22.1/drivers/i2c/busses/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/i2c/busses/Kconfig 2007-07-12 13:59:59.000000000 +0200
-@@ -4,6 +4,26 @@
++
+ /*--------------------------------------------------------------------------*/
- menu "I2C Hardware Bus support"
+ /* GPIO API */
+diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
+index 177fea8..6d8c794 100644
+--- a/arch/avr32/mm/dma-coherent.c
++++ b/arch/avr32/mm/dma-coherent.c
+@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
+ struct page *page, *free, *end;
+ int order;
-+config I2C_ATMELTWI
-+ tristate "Atmel TWI/I2C"
-+ depends on I2C
-+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality. Atmel's TWI is compatible with Philips' I2C
-+ protocol. If in doubt, say NO
-+
-+config I2C_ATMELTWI_BAUDRATE
-+ prompt "Atmel TWI baudrate"
-+ depends on I2C_ATMELTWI
-+ int
-+ default 100000
-+ help
-+ Set the TWI/I2C baudrate. This will alter the default value. A
-+ different baudrate can be set by using a module parameter as well. If
-+ no parameter is provided when loading, this is the value that will be
-+ used.
-+
- config I2C_ALI1535
- tristate "ALI 1535"
- depends on PCI
-diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/Makefile linux-avr32.git/drivers/i2c/busses/Makefile
---- linux-2.6.22.1/drivers/i2c/busses/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/i2c/busses/Makefile 2007-07-12 13:59:59.000000000 +0200
-@@ -52,6 +52,7 @@
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
++ /* Following is a work-around (a.k.a. hack) to prevent pages
++ * with __GFP_COMP being passed to split_page() which cannot
++ * handle them. The real problem is that this flag probably
++ * should be 0 on AVR32 as it is not supported on this
++ * platform--see CONFIG_HUGETLB_PAGE. */
++ gfp &= ~(__GFP_COMP);
++
+ size = PAGE_ALIGN(size);
+ order = get_order(size);
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff -x .git -Nur linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c linux-avr32.git/drivers/input/mouse/gpio_mouse.c
---- linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/input/mouse/gpio_mouse.c 2007-07-13 11:24:16.000000000 +0200
-@@ -0,0 +1,196 @@
+diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
+index 5667201..b835257 100644
+--- a/arch/avr32/mm/tlb.c
++++ b/arch/avr32/mm/tlb.c
+@@ -348,7 +348,7 @@ static int tlb_show(struct seq_file *tlb, void *v)
+ return 0;
+ }
+
+-static struct seq_operations tlb_ops = {
++static const struct seq_operations tlb_ops = {
+ .start = tlb_start,
+ .next = tlb_next,
+ .stop = tlb_stop,
+diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile
+new file mode 100644
+index 0000000..1fe81c3
+--- /dev/null
++++ b/arch/avr32/oprofile/Makefile
+@@ -0,0 +1,8 @@
++obj-$(CONFIG_OPROFILE) += oprofile.o
++
++oprofile-y := $(addprefix ../../../drivers/oprofile/, \
++ oprof.o cpu_buffer.o buffer_sync.o \
++ event_buffer.o oprofile_files.o \
++ oprofilefs.o oprofile_stats.o \
++ timer_int.o)
++oprofile-y += op_model_avr32.o
+diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
+new file mode 100644
+index 0000000..e2f876b
+--- /dev/null
++++ b/arch/avr32/oprofile/op_model_avr32.c
+@@ -0,0 +1,235 @@
+/*
-+ * Driver for simulating a mouse on GPIO lines.
++ * AVR32 Performance Counter Driver
+ *
-+ * Copyright (C) 2007 Atmel Corporation
++ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
+ */
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/oprofile.h>
++#include <linux/sched.h>
++#include <linux/types.h>
+
-+#include <linux/init.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/input-polldev.h>
-+#include <linux/gpio_mouse.h>
++#include <asm/intc.h>
++#include <asm/sysreg.h>
++#include <asm/system.h>
+
-+#include <asm/gpio.h>
++#define AVR32_PERFCTR_IRQ_GROUP 0
++#define AVR32_PERFCTR_IRQ_LINE 1
+
-+/*
-+ * Timer function which is run every scan_ms ms when the device is opened.
-+ * The dev input varaible is set to the the input_dev pointer.
-+ */
-+static void gpio_mouse_scan(struct input_polled_dev *dev)
-+{
-+ struct gpio_mouse_platform_data *gpio = dev->private;
-+ struct input_dev *input = dev->input;
-+ int x, y;
-+
-+ if (gpio->bleft >= 0)
-+ input_report_key(input, BTN_LEFT,
-+ gpio_get_value(gpio->bleft) ^ gpio->polarity);
-+ if (gpio->bmiddle >= 0)
-+ input_report_key(input, BTN_MIDDLE,
-+ gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
-+ if (gpio->bright >= 0)
-+ input_report_key(input, BTN_RIGHT,
-+ gpio_get_value(gpio->bright) ^ gpio->polarity);
-+
-+ x = (gpio_get_value(gpio->right) ^ gpio->polarity)
-+ - (gpio_get_value(gpio->left) ^ gpio->polarity);
-+ y = (gpio_get_value(gpio->down) ^ gpio->polarity)
-+ - (gpio_get_value(gpio->up) ^ gpio->polarity);
-+
-+ input_report_rel(input, REL_X, x);
-+ input_report_rel(input, REL_Y, y);
-+ input_sync(input);
-+}
-+
-+static int __init gpio_mouse_probe(struct platform_device *pdev)
-+{
-+ struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
-+ struct input_polled_dev *input_poll;
-+ struct input_dev *input;
-+ int pin, i;
-+ int error;
-+
-+ if (!pdata) {
-+ dev_err(&pdev->dev, "no platform data\n");
-+ error = -ENXIO;
-+ goto out;
-+ }
++enum { PCCNT, PCNT0, PCNT1, NR_counter };
+
-+ if (pdata->scan_ms < 0) {
-+ dev_err(&pdev->dev, "invalid scan time\n");
-+ error = -EINVAL;
-+ goto out;
-+ }
++struct avr32_perf_counter {
++ unsigned long enabled;
++ unsigned long event;
++ unsigned long count;
++ unsigned long unit_mask;
++ unsigned long kernel;
++ unsigned long user;
+
-+ for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
-+ pin = pdata->pins[i];
++ u32 ie_mask;
++ u32 flag_mask;
++};
+
-+ if (pin < 0) {
++static struct avr32_perf_counter counter[NR_counter] = {
++ {
++ .ie_mask = SYSREG_BIT(IEC),
++ .flag_mask = SYSREG_BIT(FC),
++ }, {
++ .ie_mask = SYSREG_BIT(IE0),
++ .flag_mask = SYSREG_BIT(F0),
++ }, {
++ .ie_mask = SYSREG_BIT(IE1),
++ .flag_mask = SYSREG_BIT(F1),
++ },
++};
+
-+ if (i <= GPIO_MOUSE_PIN_RIGHT) {
-+ /* Mouse direction is required. */
-+ dev_err(&pdev->dev,
-+ "missing GPIO for directions\n");
-+ error = -EINVAL;
-+ goto out_free_gpios;
-+ }
++static void avr32_perf_counter_reset(void)
++{
++ /* Reset all counter and disable/clear all interrupts */
++ sysreg_write(PCCR, (SYSREG_BIT(PCCR_R)
++ | SYSREG_BIT(PCCR_C)
++ | SYSREG_BIT(FC)
++ | SYSREG_BIT(F0)
++ | SYSREG_BIT(F1)));
++}
+
-+ if (i == GPIO_MOUSE_PIN_BLEFT)
-+ dev_dbg(&pdev->dev, "no left button defined\n");
++static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id)
++{
++ struct avr32_perf_counter *ctr = dev_id;
++ struct pt_regs *regs;
++ u32 pccr;
+
-+ } else {
-+ error = gpio_request(pin, "gpio_mouse");
-+ if (error) {
-+ dev_err(&pdev->dev, "fail %d pin (%d idx)\n",
-+ pin, i);
-+ goto out_free_gpios;
-+ }
++ if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP)
++ & (1 << AVR32_PERFCTR_IRQ_LINE))))
++ return IRQ_NONE;
+
-+ gpio_direction_input(pin);
-+ }
-+ }
++ regs = get_irq_regs();
++ pccr = sysreg_read(PCCR);
++
++ /* Clear the interrupt flags we're about to handle */
++ sysreg_write(PCCR, pccr);
+
-+ input_poll = input_allocate_polled_device();
-+ if (!input_poll) {
-+ dev_err(&pdev->dev, "not enough memory for input device\n");
-+ error = -ENOMEM;
-+ goto out_free_gpios;
++ /* PCCNT */
++ if (ctr->enabled && (pccr & ctr->flag_mask)) {
++ sysreg_write(PCCNT, -ctr->count);
++ oprofile_add_sample(regs, PCCNT);
+ }
++ ctr++;
++ /* PCNT0 */
++ if (ctr->enabled && (pccr & ctr->flag_mask)) {
++ sysreg_write(PCNT0, -ctr->count);
++ oprofile_add_sample(regs, PCNT0);
++ }
++ ctr++;
++ /* PCNT1 */
++ if (ctr->enabled && (pccr & ctr->flag_mask)) {
++ sysreg_write(PCNT1, -ctr->count);
++ oprofile_add_sample(regs, PCNT1);
++ }
++
++ return IRQ_HANDLED;
++}
+
-+ platform_set_drvdata(pdev, input_poll);
++static int avr32_perf_counter_create_files(struct super_block *sb,
++ struct dentry *root)
++{
++ struct dentry *dir;
++ unsigned int i;
++ char filename[4];
++
++ for (i = 0; i < NR_counter; i++) {
++ snprintf(filename, sizeof(filename), "%u", i);
++ dir = oprofilefs_mkdir(sb, root, filename);
++
++ oprofilefs_create_ulong(sb, dir, "enabled",
++ &counter[i].enabled);
++ oprofilefs_create_ulong(sb, dir, "event",
++ &counter[i].event);
++ oprofilefs_create_ulong(sb, dir, "count",
++ &counter[i].count);
++
++ /* Dummy entries */
++ oprofilefs_create_ulong(sb, dir, "kernel",
++ &counter[i].kernel);
++ oprofilefs_create_ulong(sb, dir, "user",
++ &counter[i].user);
++ oprofilefs_create_ulong(sb, dir, "unit_mask",
++ &counter[i].unit_mask);
++ }
+
-+ /* set input-polldev handlers */
-+ input_poll->private = pdata;
-+ input_poll->poll = gpio_mouse_scan;
-+ input_poll->poll_interval = pdata->scan_ms;
++ return 0;
++}
+
-+ input = input_poll->input;
-+ input->name = pdev->name;
-+ input->id.bustype = BUS_HOST;
-+ input->dev.parent = &pdev->dev;
++static int avr32_perf_counter_setup(void)
++{
++ struct avr32_perf_counter *ctr;
++ u32 pccr;
++ int ret;
++ int i;
+
-+ input_set_capability(input, EV_REL, REL_X);
-+ input_set_capability(input, EV_REL, REL_Y);
-+ if (pdata->bleft >= 0)
-+ input_set_capability(input, EV_KEY, BTN_LEFT);
-+ if (pdata->bmiddle >= 0)
-+ input_set_capability(input, EV_KEY, BTN_MIDDLE);
-+ if (pdata->bright >= 0)
-+ input_set_capability(input, EV_KEY, BTN_RIGHT);
++ pr_debug("avr32_perf_counter_setup\n");
+
-+ error = input_register_polled_device(input_poll);
-+ if (error) {
-+ dev_err(&pdev->dev, "could not register input device\n");
-+ goto out_free_polldev;
++ if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) {
++ printk(KERN_ERR
++ "oprofile: setup: perf counter already enabled\n");
++ return -EBUSY;
+ }
+
-+ dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
-+ pdata->scan_ms,
-+ pdata->bleft < 0 ? "" : "left ",
-+ pdata->bmiddle < 0 ? "" : "middle ",
-+ pdata->bright < 0 ? "" : "right");
++ ret = request_irq(AVR32_PERFCTR_IRQ_GROUP,
++ avr32_perf_counter_interrupt, IRQF_SHARED,
++ "oprofile", counter);
++ if (ret)
++ return ret;
++
++ avr32_perf_counter_reset();
+
-+ return 0;
++ pccr = 0;
++ for (i = PCCNT; i < NR_counter; i++) {
++ ctr = &counter[i];
++ if (!ctr->enabled)
++ continue;
+
-+ out_free_polldev:
-+ input_free_polled_device(input_poll);
-+ platform_set_drvdata(pdev, NULL);
++ pr_debug("enabling counter %d...\n", i);
++
++ pccr |= ctr->ie_mask;
+
-+ out_free_gpios:
-+ while (--i >= 0) {
-+ pin = pdata->pins[i];
-+ if (pin)
-+ gpio_free(pin);
++ switch (i) {
++ case PCCNT:
++ /* PCCNT always counts cycles, so no events */
++ sysreg_write(PCCNT, -ctr->count);
++ break;
++ case PCNT0:
++ pccr |= SYSREG_BF(CONF0, ctr->event);
++ sysreg_write(PCNT0, -ctr->count);
++ break;
++ case PCNT1:
++ pccr |= SYSREG_BF(CONF1, ctr->event);
++ sysreg_write(PCNT1, -ctr->count);
++ break;
++ }
+ }
-+ out:
-+ return error;
++
++ pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr);
++
++ sysreg_write(PCCR, pccr);
++
++ return 0;
+}
+
-+static int __devexit gpio_mouse_remove(struct platform_device *pdev)
++static void avr32_perf_counter_shutdown(void)
+{
-+ struct input_polled_dev *input = platform_get_drvdata(pdev);
-+ struct gpio_mouse_platform_data *pdata = input->private;
-+ int pin, i;
++ pr_debug("avr32_perf_counter_shutdown\n");
+
-+ input_unregister_polled_device(input);
-+ input_free_polled_device(input);
++ avr32_perf_counter_reset();
++ free_irq(AVR32_PERFCTR_IRQ_GROUP, counter);
++}
+
-+ for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
-+ pin = pdata->pins[i];
-+ if (pin >= 0)
-+ gpio_free(pin);
-+ }
++static int avr32_perf_counter_start(void)
++{
++ pr_debug("avr32_perf_counter_start\n");
+
-+ platform_set_drvdata(pdev, NULL);
++ sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E));
+
+ return 0;
+}
+
-+struct platform_driver gpio_mouse_device_driver = {
-+ .remove = __devexit_p(gpio_mouse_remove),
-+ .driver = {
-+ .name = "gpio_mouse",
-+ }
-+};
-+
-+static int __init gpio_mouse_init(void)
++static void avr32_perf_counter_stop(void)
+{
-+ return platform_driver_probe(&gpio_mouse_device_driver,
-+ gpio_mouse_probe);
++ pr_debug("avr32_perf_counter_stop\n");
++
++ sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E));
+}
-+module_init(gpio_mouse_init);
+
-+static void __exit gpio_mouse_exit(void)
++static struct oprofile_operations avr32_perf_counter_ops __initdata = {
++ .create_files = avr32_perf_counter_create_files,
++ .setup = avr32_perf_counter_setup,
++ .shutdown = avr32_perf_counter_shutdown,
++ .start = avr32_perf_counter_start,
++ .stop = avr32_perf_counter_stop,
++ .cpu_type = "avr32",
++};
++
++int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
-+ platform_driver_unregister(&gpio_mouse_device_driver);
-+}
-+module_exit(gpio_mouse_exit);
++ if (!(current_cpu_data.features & AVR32_FEATURE_PCTR))
++ return -ENODEV;
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("GPIO mouse driver");
-+MODULE_LICENSE("GPL");
-diff -x .git -Nur linux-2.6.22.1/drivers/input/mouse/Kconfig linux-avr32.git/drivers/input/mouse/Kconfig
---- linux-2.6.22.1/drivers/input/mouse/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/input/mouse/Kconfig 2007-07-13 11:24:16.000000000 +0200
-@@ -216,4 +216,20 @@
- help
- Say Y here to support HIL pointers.
-
-+config MOUSE_GPIO
-+ tristate "GPIO mouse"
-+ depends on GENERIC_GPIO
-+ select INPUT_POLLDEV
-+ help
-+ This driver simulates a mouse on GPIO lines of various CPUs (and some
-+ other chips).
++ memcpy(ops, &avr32_perf_counter_ops,
++ sizeof(struct oprofile_operations));
+
-+ Say Y here if your device has buttons or a simple joystick connected
-+ directly to GPIO lines. Your board-specific setup logic must also
-+ provide a platform device and platform data saying which GPIOs are
-+ used.
++ printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
+
-+ To compile this driver as a module, choose M here: the
-+ module will be called gpio_mouse.
++ return 0;
++}
+
- endif
-diff -x .git -Nur linux-2.6.22.1/drivers/input/mouse/Makefile linux-avr32.git/drivers/input/mouse/Makefile
---- linux-2.6.22.1/drivers/input/mouse/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/input/mouse/Makefile 2007-07-13 11:24:16.000000000 +0200
-@@ -15,6 +15,7 @@
- obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
- obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o
- obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
-+obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
-
- psmouse-objs := psmouse-base.o synaptics.o
-
-diff -x .git -Nur linux-2.6.22.1/drivers/leds/Kconfig linux-avr32.git/drivers/leds/Kconfig
---- linux-2.6.22.1/drivers/leds/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/leds/Kconfig 2007-07-12 14:00:02.000000000 +0200
-@@ -95,6 +95,14 @@
- help
- This option enables support for the front LED on Cobalt Server
++void oprofile_arch_exit(void)
++{
++
++}
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index c466c6c..0bb2052 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -88,6 +88,14 @@ config I2C_AT91
+ to support combined I2C messages. Use the i2c-gpio driver
+ unless your system can cope with those limitations.
-+config LEDS_GPIO
-+ tristate "LED Support for GPIO connected LEDs"
-+ depends on LEDS_CLASS && GENERIC_GPIO
++config I2C_ATMELTWI
++ tristate "Atmel Two-Wire Interface (TWI)"
++ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
+ help
-+ This option enables support for the LEDs connected to GPIO
-+ outputs. To be useful the particular board must have LEDs
-+ and they must be connected to the GPIO lines.
-+
- comment "LED Triggers"
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality.
++
+ config I2C_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on SOC_AU1550 || SOC_AU1200
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 81d43c2..af3f350 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
- config LEDS_TRIGGERS
-diff -x .git -Nur linux-2.6.22.1/drivers/leds/leds-gpio.c linux-avr32.git/drivers/leds/leds-gpio.c
---- linux-2.6.22.1/drivers/leds/leds-gpio.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/leds/leds-gpio.c 2007-07-12 14:00:02.000000000 +0200
-@@ -0,0 +1,199 @@
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
+new file mode 100644
+index 0000000..70c719a
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.c
+@@ -0,0 +1,436 @@
+/*
-+ * LEDs driver for GPIOs
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
+ *
-+ * Copyright (C) 2007 8D Technologies inc.
-+ * Raphael Assenat <raph@8d.com>
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
+ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
+ */
-+#include <linux/kernel.h>
++#undef VERBOSE_DEBUG
++
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
+#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
++#include <linux/completion.h>
++#include <linux/io.h>
+
-+#include <asm/gpio.h>
++#include "i2c-atmeltwi.h"
++
++static unsigned int baudrate = 100 * 1000;
++module_param(baudrate, uint, S_IRUGO);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++
++
++struct atmel_twi {
++ void __iomem *regs;
++ struct i2c_adapter adapter;
++ struct clk *pclk;
++ struct completion comp;
++ u32 mask;
++ u8 *buf;
++ u16 len;
++ u16 acks_left;
++ int status;
++ unsigned int irq;
+
-+struct gpio_led_data {
-+ struct led_classdev cdev;
-+ unsigned gpio;
-+ struct work_struct work;
-+ u8 new_level;
-+ u8 can_sleep;
-+ u8 active_low;
+};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
+
-+static void gpio_led_work(struct work_struct *work)
++/*
++ * (Re)Initialize the TWI hardware registers.
++ */
++static int twi_hwinit(struct atmel_twi *twi)
+{
-+ struct gpio_led_data *led_dat =
-+ container_of(work, struct gpio_led_data, work);
++ unsigned long cdiv, ckdiv = 0;
+
-+ gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
-+}
++ /* REVISIT: wait till SCL is high before resetting; otherwise,
++ * some versions will wedge forever.
++ */
+
-+static void gpio_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct gpio_led_data *led_dat =
-+ container_of(led_cdev, struct gpio_led_data, cdev);
-+ int level;
++ twi_writel(twi, IDR, ~0UL);
++ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
++ twi_readl(twi, SR);
+
-+ if (value == LED_OFF)
-+ level = 0;
-+ else
-+ level = 1;
++ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++ while (cdiv > 255) {
++ ckdiv++;
++ cdiv = cdiv >> 1;
++ }
+
-+ if (led_dat->active_low)
-+ level = !level;
++ /* REVISIT: there are various errata to consider re CDIV and CHDIV
++ * here, at least on at91 parts.
++ */
+
-+ /* setting GPIOs with I2C/etc requires a preemptible task context */
-+ if (led_dat->can_sleep) {
-+ if (preempt_count()) {
-+ led_dat->new_level = level;
-+ schedule_work(&led_dat->work);
-+ } else
-+ gpio_set_value_cansleep(led_dat->gpio, level);
-+ } else
-+ gpio_set_value(led_dat->gpio, level);
++ if (ckdiv > 7)
++ return -EINVAL;
++ else
++ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
++ | TWI_BF(CHDIV, cdiv)
++ | TWI_BF(CLDIV, cdiv));
++ return 0;
+}
+
-+static int __init gpio_led_probe(struct platform_device *pdev)
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
++ * limit, but I2C has no limit at all.
++ */
++static int twi_complete(struct atmel_twi *twi, u32 mask)
+{
-+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_led *cur_led;
-+ struct gpio_led_data *leds_data, *led_dat;
-+ int i, ret = 0;
-+
-+ if (!pdata)
-+ return -EBUSY;
++ int timeout = msecs_to_jiffies(100);
+
-+ leds_data = kzalloc(sizeof(struct gpio_led_data) * pdata->num_leds,
-+ GFP_KERNEL);
-+ if (!leds_data)
-+ return -ENOMEM;
++ mask |= TWI_BIT(TXCOMP);
++ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
++ init_completion(&twi->comp);
+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ cur_led = &pdata->leds[i];
-+ led_dat = &leds_data[i];
-+
-+ led_dat->cdev.name = cur_led->name;
-+ led_dat->cdev.default_trigger = cur_led->default_trigger;
-+ led_dat->gpio = cur_led->gpio;
-+ led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
-+ led_dat->active_low = cur_led->active_low;
-+ led_dat->cdev.brightness_set = gpio_led_set;
-+ led_dat->cdev.brightness = cur_led->active_low ? LED_FULL : LED_OFF;
-+
-+ ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
-+ if (ret < 0)
-+ goto err;
++ twi_writel(twi, IER, mask);
+
-+ gpio_direction_output(led_dat->gpio, led_dat->active_low);
++ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++ /* RESET TWI interface */
++ twi_writel(twi, CR, TWI_BIT(SWRST));
+
-+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+ if (ret < 0) {
-+ gpio_free(led_dat->gpio);
-+ goto err;
-+ }
++ /* Reinitialize TWI */
++ twi_hwinit(twi);
+
-+ INIT_WORK(&led_dat->work, gpio_led_work);
++ return -ETIMEDOUT;
+ }
-+
-+ platform_set_drvdata(pdev, leds_data);
-+
+ return 0;
-+
-+err:
-+ if (i > 0) {
-+ for (i = i - 1; i >= 0; i--) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ gpio_free(leds_data[i].gpio);
-+ }
-+ }
-+
-+ flush_scheduled_work();
-+ kfree(leds_data);
-+
-+ return ret;
+}
+
-+static int __exit gpio_led_remove(struct platform_device *pdev)
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
+{
++ struct atmel_twi *twi = to_atmel_twi(adap);
+ int i;
-+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_led_data *leds_data;
+
-+ leds_data = platform_get_drvdata(pdev);
++ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ gpio_free(leds_data[i].gpio);
-+ }
-+
-+ kfree(leds_data);
++ twi->status = 0;
++ for (i = 0; i < num; i++, pmsg++) {
++ twi->len = pmsg->len;
++ twi->buf = pmsg->buf;
++ twi->acks_left = pmsg->len;
++ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
+
-+ return 0;
-+}
++ dev_dbg(&adap->dev,
++ "#%d: %s %d byte%s %s dev 0x%02x\n",
++ i,
++ pmsg->flags & I2C_M_RD ? "reading" : "writing",
++ pmsg->len,
++ pmsg->len > 1 ? "s" : "",
++ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
-+#ifdef CONFIG_PM
-+static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_led_data *leds_data;
-+ int i;
-+
-+ leds_data = platform_get_drvdata(pdev);
++ /* enable */
++ twi_writel(twi, CR, TWI_BIT(MSEN));
++
++ if (pmsg->flags & I2C_M_RD) {
++ /* cleanup after previous RX overruns */
++ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
++ twi_readl(twi, RHR);
+
-+ for (i = 0; i < pdata->num_leds; i++)
-+ led_classdev_suspend(&leds_data[i].cdev);
++ if (twi->len == 1)
++ twi_writel(twi, CR,
++ TWI_BIT(START) | TWI_BIT(STOP));
++ else
++ twi_writel(twi, CR, TWI_BIT(START));
+
-+ return 0;
-+}
++ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "RX[%d] timeout. "
++ "Stopped with %d bytes left\n",
++ i, twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ } else {
++ twi_writel(twi, THR, twi->buf[0]);
++ twi->acks_left--;
++ /* REVISIT: some chips don't start automagically:
++ * twi_writel(twi, CR, TWI_BIT(START));
++ */
++ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "TX[%d] timeout. "
++ "Stopped with %d bytes left\n",
++ i, twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ /* REVISIT: an erratum workaround may be needed here;
++ * see sam9261 "STOP not generated" (START either).
++ */
++ }
+
-+static int gpio_led_resume(struct platform_device *pdev)
-+{
-+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_led_data *leds_data;
-+ int i;
++ /* Disable TWI interface */
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
+
-+ leds_data = platform_get_drvdata(pdev);
++ if (twi->status)
++ return twi->status;
+
-+ for (i = 0; i < pdata->num_leds; i++)
-+ led_classdev_resume(&leds_data[i].cdev);
++ /* WARNING: This driver lies about properly supporting
++ * repeated start, or it would *ALWAYS* return here. It
++ * has issued a STOP. Continuing is a false claim -- that
++ * a second (or third, etc.) message is part of the same
++ * "combined" (no STOPs between parts) message.
++ */
+
-+ return 0;
++ } /* end cur msg */
++
++ return i;
+}
-+#else
-+#define gpio_led_suspend NULL
-+#define gpio_led_resume NULL
-+#endif
+
-+static struct platform_driver gpio_led_driver = {
-+ .remove = __exit_p(gpio_led_remove),
-+ .suspend = gpio_led_suspend,
-+ .resume = gpio_led_resume,
-+ .driver = {
-+ .name = "leds-gpio",
-+ .owner = THIS_MODULE,
-+ },
-+};
+
-+static int __init gpio_led_init(void)
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
+{
-+ return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
-+}
++ struct atmel_twi *twi = dev_id;
++ int status = twi_readl(twi, SR);
+
-+static void __exit gpio_led_exit(void)
-+{
-+ platform_driver_unregister(&gpio_led_driver);
-+}
++ /* Save state for later debug prints */
++ int old_status = status;
+
-+module_init(gpio_led_init);
-+module_exit(gpio_led_exit);
++ if (twi->mask & status) {
+
-+MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
-+MODULE_DESCRIPTION("GPIO LED driver");
-+MODULE_LICENSE("GPL");
-diff -x .git -Nur linux-2.6.22.1/drivers/leds/Makefile linux-avr32.git/drivers/leds/Makefile
---- linux-2.6.22.1/drivers/leds/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/leds/Makefile 2007-07-12 14:00:02.000000000 +0200
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
- obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
-+obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-diff -x .git -Nur linux-2.6.22.1/drivers/mmc/host/atmel-mci.c linux-avr32.git/drivers/mmc/host/atmel-mci.c
---- linux-2.6.22.1/drivers/mmc/host/atmel-mci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/mmc/host/atmel-mci.c 2007-07-12 14:00:03.000000000 +0200
-@@ -0,0 +1,1217 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
++ status &= twi->mask;
+
-+#include <linux/mmc/host.h>
++ if (status & TWI_BIT(RXRDY)) {
++ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
++ /* Note weakness in fault reporting model:
++ * we can't say "the first N of these data
++ * bytes are valid".
++ */
++ dev_err(&twi->adapter.dev,
++ "OVERRUN RX! %04x, lost %d\n",
++ old_status, twi->acks_left);
++ twi->acks_left = 0;
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ twi->status = -EOVERFLOW;
++ } else if (twi->acks_left > 0) {
++ twi->buf[twi->len - twi->acks_left] =
++ twi_readl(twi, RHR);
++ twi->acks_left--;
++ }
++ if (status & TWI_BIT(TXCOMP))
++ goto done;
++ if (twi->acks_left == 1)
++ twi_writel(twi, CR, TWI_BIT(STOP));
+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
++ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
++ goto done;
+
-+#include "atmel-mci.h"
++ } else if (status & TWI_BIT(TXRDY)) {
++ if (twi->acks_left > 0) {
++ twi->acks_left--;
++ twi_writel(twi, THR,
++ twi->buf[twi->len - twi->acks_left]);
++ } else
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ }
+
-+#define DRIVER_NAME "atmel_mci"
++ if (twi->acks_left == 0)
++ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
++ }
+
-+#define MCI_CMD_ERROR_FLAGS (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | \
-+ MCI_BIT(RCRCE) | MCI_BIT(RENDE) | \
-+ MCI_BIT(RTOE))
-+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
-+ MCI_BIT(OVRE) | MCI_BIT(UNRE))
++ /* enabling this message helps trigger overruns/underruns ... */
++ dev_vdbg(&twi->adapter.dev,
++ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
++ old_status,
++ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
++ twi->acks_left);
+
-+enum {
-+ EVENT_CMD_COMPLETE = 0,
-+ EVENT_CMD_ERROR,
-+ EVENT_DATA_COMPLETE,
-+ EVENT_DATA_ERROR,
-+ EVENT_STOP_SENT,
-+ EVENT_STOP_COMPLETE,
-+ EVENT_STOP_ERROR,
-+ EVENT_DMA_ERROR,
-+ EVENT_CARD_DETECT,
-+};
++ return IRQ_HANDLED;
+
-+struct atmel_mci_dma {
-+ struct dma_request_sg req;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
++done:
++ /* Note weak fault reporting model: we can't report how many
++ * bytes we sent before the NAK, or let upper layers choose
++ * whether to continue. The I2C stack doesn't allow that...
++ */
++ if (status & TWI_BIT(NACK)) {
++ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
++ twi->acks_left);
++ twi->status = -EPIPE;
+
-+struct atmel_mci {
-+ struct mmc_host *mmc;
-+ void __iomem *regs;
-+ struct atmel_mci_dma dma;
++ /* TX underrun morphs automagically into a premature STOP;
++ * we'll probably observe UVRE even when it's not documented.
++ */
++ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
++ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
++ old_status, twi->acks_left);
++ twi->status = -ENOSR;
++ }
+
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
++ twi_writel(twi, IDR, ~0UL);
++ complete(&twi->comp);
+
-+ u32 stop_cmdr;
-+ u32 stop_iflags;
++ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
++ old_status, twi->acks_left, twi->status);
+
-+ struct tasklet_struct tasklet;
-+ unsigned long pending_events;
-+ unsigned long completed_events;
-+ u32 error_status;
++ return IRQ_HANDLED;
++}
+
-+ int present;
-+ int detect_pin;
-+ int wp_pin;
+
-+ unsigned long bus_hz;
-+ unsigned long mapbase;
-+ struct clk *mck;
-+ struct platform_device *pdev;
++/*
++ * Return list of supported functionality.
++ *
++ * NOTE: see warning above about repeated starts; this driver is falsely
++ * claiming to support "combined" transfers. The mid-message STOPs mean
++ * some slaves will never work with this driver. (Use i2c-gpio...)
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
++ & ~I2C_FUNC_SMBUS_QUICK;
++}
+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+ struct dentry *debugfs_req;
-+ struct dentry *debugfs_pending_events;
-+ struct dentry *debugfs_completed_events;
-+#endif
++static struct i2c_algorithm twi_algorithm = {
++ .master_xfer = twi_xfer,
++ .functionality = twi_func,
+};
+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
-+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host) \
-+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_cmd_error_is_complete(host) \
-+ test_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_data_is_complete(host) \
-+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host) \
-+ test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host) \
-+ test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host) \
-+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_stop_error_is_complete(host) \
-+ test_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_dma_error_is_complete(host) \
-+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_card_detect_is_complete(host) \
-+ test_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_is_pending(host) \
-+ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_is_completed(host) \
-+ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_complete(host) \
-+ set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_complete(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host) \
-+ set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_complete(host) \
-+ set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_complete(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_complete(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_cmd_error_pending(host) \
-+ set_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_set_data_pending(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host) \
-+ set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_stop_error_pending(host) \
-+ set_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_set_dma_error_pending(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_set_card_detect_pending(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->pending_events)
++/*
++ * Main initialization routine.
++ */
++static int __init twi_probe(struct platform_device *pdev)
++{
++ struct atmel_twi *twi;
++ struct resource *regs;
++ struct clk *pclk;
++ struct i2c_adapter *adapter;
++ int rc, irq;
+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host) \
-+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_pending(host) \
-+ clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_pending(host) \
-+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host) \
-+ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host) \
-+ clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host) \
-+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_pending(host) \
-+ clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_pending(host) \
-+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_pending(host) \
-+ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
+
++ pclk = clk_get(&pdev->dev, "twi_pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ clk_enable(pclk);
+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
++ rc = -ENOMEM;
++ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++ if (!twi) {
++ dev_dbg(&pdev->dev, "can't allocate interface!\n");
++ goto err_alloc_twi;
++ }
+
-+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
++ twi->pclk = pclk;
++ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!twi->regs)
++ goto err_ioremap;
+
-+struct req_dbg_data {
-+ unsigned int nbytes;
-+ char str[DBG_REQ_BUF_SIZE];
-+};
++ irq = platform_get_irq(pdev, 0);
++ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++ if (rc) {
++ dev_dbg(&pdev->dev, "can't bind irq!\n");
++ goto err_irq;
++ }
++ twi->irq = irq;
+
-+static int req_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd, *stop;
-+ struct mmc_data *data;
-+ struct req_dbg_data *priv;
-+ char *str;
-+ unsigned long n = 0;
++ rc = twi_hwinit(twi);
++ if (rc) {
++ dev_err(&pdev->dev, "Unable to set baudrate\n");
++ goto err_hw_init;
++ }
+
-+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+ str = priv->str;
++ adapter = &twi->adapter;
++ sprintf(adapter->name, "TWI");
++ adapter->algo = &twi_algorithm;
++ adapter->class = I2C_CLASS_ALL;
++ adapter->nr = pdev->id;
++ adapter->dev.parent = &pdev->dev;
+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
++ platform_set_drvdata(pdev, twi);
+
-+ spin_lock_irq(&host->mmc->lock);
-+ mrq = host->mrq;
-+ if (mrq) {
-+ cmd = mrq->cmd;
-+ data = mrq->data;
-+ stop = mrq->stop;
-+ n = snprintf(str, DBG_REQ_BUF_SIZE,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ cmd->opcode, cmd->arg, cmd->flags,
-+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+ cmd->resp[3], cmd->error);
-+ if (n < DBG_REQ_BUF_SIZE && data)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "DATA %u * %u (%u) %x (err %u)\n",
-+ data->blocks, data->blksz,
-+ data->bytes_xfered, data->flags,
-+ data->error);
-+ if (n < DBG_REQ_BUF_SIZE && stop)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ stop->opcode, stop->arg, stop->flags,
-+ stop->resp[0], stop->resp[1],
-+ stop->resp[2], stop->resp[3],
-+ stop->error);
++ rc = i2c_add_numbered_adapter(adapter);
++ if (rc) {
++ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
++ adapter->name);
++ goto err_register;
+ }
-+ spin_unlock_irq(&host->mmc->lock);
-+ mutex_unlock(&inode->i_mutex);
+
-+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+ file->private_data = priv;
++ dev_info(&pdev->dev,
++ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
++ baudrate/1000, (unsigned long)regs->start);
+
+ return 0;
-+}
+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct req_dbg_data *priv = file->private_data;
+
-+ return simple_read_from_buffer(buf, nbytes, ppos,
-+ priv->str, priv->nbytes);
++err_register:
++ platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++ free_irq(irq, twi);
++
++err_irq:
++ iounmap(twi->regs);
++
++err_ioremap:
++ kfree(twi);
++
++err_alloc_twi:
++ clk_disable(pclk);
++ clk_put(pclk);
++
++ return rc;
+}
+
-+static int req_dbg_release(struct inode *inode, struct file *file)
++static int __exit twi_remove(struct platform_device *pdev)
+{
-+ kfree(file->private_data);
-+ return 0;
++ struct atmel_twi *twi = platform_get_drvdata(pdev);
++ int res;
++
++ platform_set_drvdata(pdev, NULL);
++ res = i2c_del_adapter(&twi->adapter);
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ iounmap(twi->regs);
++ clk_disable(twi->pclk);
++ clk_put(twi->pclk);
++ free_irq(twi->irq, twi);
++ kfree(twi);
++
++ return res;
+}
+
-+static const struct file_operations req_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = req_dbg_open,
-+ .llseek = no_llseek,
-+ .read = req_dbg_read,
-+ .release = req_dbg_release,
++static struct platform_driver twi_driver = {
++ .remove = __exit_p(twi_remove),
++ .driver = {
++ .name = "atmel_twi",
++ .owner = THIS_MODULE,
++ },
+};
+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
++static int __init atmel_twi_init(void)
+{
-+ struct atmel_mci *host;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
++ return platform_driver_probe(&twi_driver, twi_probe);
++}
+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
++static void __exit atmel_twi_exit(void)
++{
++ platform_driver_unregister(&twi_driver);
++}
+
-+ spin_lock_irq(&host->mmc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(host->regs + i * 4);
-+ spin_unlock_irq(&host->mmc->lock);
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
+
-+ file->private_data = data;
-+ ret = 0;
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/i2c/busses/i2c-atmeltwi.h b/drivers/i2c/busses/i2c-atmeltwi.h
+new file mode 100644
+index 0000000..1aca065
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.h
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
+
-+out:
-+ mutex_unlock(&inode->i_mutex);
++#ifndef __ATMELTWI_H__
++#define __ATMELTWI_H__
+
-+ return ret;
-+}
++/* TWI register offsets */
++#define TWI_CR 0x0000
++#define TWI_MMR 0x0004
++#define TWI_SMR 0x0008
++#define TWI_IADR 0x000c
++#define TWI_CWGR 0x0010
++#define TWI_SR 0x0020
++#define TWI_IER 0x0024
++#define TWI_IDR 0x0028
++#define TWI_IMR 0x002c
++#define TWI_RHR 0x0030
++#define TWI_THR 0x0034
+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
++/* Bitfields in CR */
++#define TWI_START_OFFSET 0
++#define TWI_START_SIZE 1
++#define TWI_STOP_OFFSET 1
++#define TWI_STOP_SIZE 1
++#define TWI_MSEN_OFFSET 2
++#define TWI_MSEN_SIZE 1
++#define TWI_MSDIS_OFFSET 3
++#define TWI_MSDIS_SIZE 1
++#define TWI_SVEN_OFFSET 4
++#define TWI_SVEN_SIZE 1
++#define TWI_SVDIS_OFFSET 5
++#define TWI_SVDIS_SIZE 1
++#define TWI_SWRST_OFFSET 7
++#define TWI_SWRST_SIZE 1
+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET 8
++#define TWI_IADRSZ_SIZE 2
++#define TWI_MREAD_OFFSET 12
++#define TWI_MREAD_SIZE 1
++#define TWI_DADR_OFFSET 16
++#define TWI_DADR_SIZE 7
+
-+ return ret;
-+}
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET 16
++#define TWI_SADR_SIZE 7
+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET 0
++#define TWI_IADR_SIZE 24
+
-+static const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
-+};
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET 0
++#define TWI_CLDIV_SIZE 8
++#define TWI_CHDIV_OFFSET 8
++#define TWI_CHDIV_SIZE 8
++#define TWI_CKDIV_OFFSET 16
++#define TWI_CKDIV_SIZE 3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET 0
++#define TWI_TXCOMP_SIZE 1
++#define TWI_RXRDY_OFFSET 1
++#define TWI_RXRDY_SIZE 1
++#define TWI_TXRDY_OFFSET 2
++#define TWI_TXRDY_SIZE 1
++#define TWI_SVDIR_OFFSET 3
++#define TWI_SVDIR_SIZE 1
++#define TWI_SVACC_OFFSET 4
++#define TWI_SVACC_SIZE 1
++#define TWI_GCACC_OFFSET 5
++#define TWI_GCACC_SIZE 1
++#define TWI_OVRE_OFFSET 6
++#define TWI_OVRE_SIZE 1
++#define TWI_UNRE_OFFSET 7
++#define TWI_UNRE_SIZE 1
++#define TWI_NACK_OFFSET 8
++#define TWI_NACK_SIZE 1
++#define TWI_ARBLST_OFFSET 9
++#define TWI_ARBLST_SIZE 1
+
-+static void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+ struct mmc_host *mmc;
-+ struct dentry *root, *regs;
-+ struct resource *res;
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET 0
++#define TWI_RXDATA_SIZE 8
+
-+ mmc = host->mmc;
-+ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ host->debugfs_root = root;
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET 0
++#define TWI_TXDATA_SIZE 8
+
-+ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR 0
++#define TWI_IADRSZ_ONE_BYTE 1
++#define TWI_IADRSZ_TWO_BYTES 2
++#define TWI_IADRSZ_THREE_BYTES 3
+
-+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+ regs->d_inode->i_size = res->end - res->start + 1;
-+ host->debugfs_regs = regs;
++/* Bit manipulation macros */
++#define TWI_BIT(name) \
++ (1 << TWI_##name##_OFFSET)
++#define TWI_BF(name, value) \
++ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
++ << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name, value) \
++ (((value) >> TWI_##name##_OFFSET) \
++ & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name, value, old) \
++ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
++ << TWI_##name##_OFFSET)) \
++ | TWI_BF(name, (value)))
+
-+ host->debugfs_req = debugfs_create_file("req", 0400, root,
-+ host, &req_dbg_fops);
-+ if (!host->debugfs_req)
-+ goto err_req;
++/* Register access macros */
++#define twi_readl(port, reg) \
++ __raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + TWI_##reg)
+
-+ host->debugfs_pending_events
-+ = debugfs_create_u32("pending_events", 0400, root,
-+ (u32 *)&host->pending_events);
-+ if (!host->debugfs_pending_events)
-+ goto err_pending_events;
++#endif /* __ATMELTWI_H__ */
+diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
+index ec568fa..4e1db3b 100644
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -18,6 +18,13 @@ config LEDS_CLASS
+
+ comment "LED drivers"
+
++config LEDS_ATMEL_PWM
++ tristate "LED Support using Atmel PWM outputs"
++ depends on LEDS_CLASS && ATMEL_PWM
++ help
++ This option enables support for LEDs driven using outputs
++ of the dedicated PWM controller found on newer Atmel SOCs.
++
+ config LEDS_CORGI
+ tristate "LED Support for the Sharp SL-C7x0 series"
+ depends on LEDS_CLASS && PXA_SHARP_C7xx
+diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
+index a60de1b..04bc850 100644
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
+ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
+
+ # LED Platform Drivers
++obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
+ obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
+ obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
+ obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
+diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
+new file mode 100644
+index 0000000..187031c
+--- /dev/null
++++ b/drivers/leds/leds-atmel-pwm.c
+@@ -0,0 +1,155 @@
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/io.h>
++#include <linux/atmel_pwm.h>
+
-+ host->debugfs_completed_events
-+ = debugfs_create_u32("completed_events", 0400, root,
-+ (u32 *)&host->completed_events);
-+ if (!host->debugfs_completed_events)
-+ goto err_completed_events;
+
-+ return;
++struct pwmled {
++ struct led_classdev cdev;
++ struct pwm_channel pwmc;
++ struct gpio_led *desc;
++ u32 mult;
++ u8 active_low;
++};
+
-+err_completed_events:
-+ debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+ debugfs_remove(host->debugfs_req);
-+err_req:
-+ debugfs_remove(host->debugfs_regs);
-+err_regs:
-+ debugfs_remove(host->debugfs_root);
-+err_root:
-+ host->debugfs_root = NULL;
-+ dev_err(&host->pdev->dev,
-+ "failed to initialize debugfs for %s\n",
-+ mmc_hostname(mmc));
-+}
+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+ if (host->debugfs_root) {
-+ debugfs_remove(host->debugfs_completed_events);
-+ debugfs_remove(host->debugfs_pending_events);
-+ debugfs_remove(host->debugfs_req);
-+ debugfs_remove(host->debugfs_regs);
-+ debugfs_remove(host->debugfs_root);
-+ host->debugfs_root = NULL;
-+ }
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
++/*
++ * For simplicity, we use "brightness" as if it were a linear function
++ * of PWM duty cycle. However, a logarithmic function of duty cycle is
++ * probably a better match for perceived brightness: two is half as bright
++ * as four, four is half as bright as eight, etc
++ */
++static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
+{
++ struct pwmled *led;
+
++ /* update the duty cycle for the *next* period */
++ led = container_of(cdev, struct pwmled, cdev);
++ pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
+}
+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++/*
++ * NOTE: we reuse the platform_data structure of GPIO leds,
++ * but repurpose its "gpio" number as a PWM channel number.
++ */
++static int __init pwmled_probe(struct platform_device *pdev)
+{
++ const struct gpio_led_platform_data *pdata;
++ struct pwmled *leds;
++ unsigned i;
++ int status;
+
-+}
-+#endif /* CONFIG_DEBUG_FS */
++ pdata = pdev->dev.platform_data;
++ if (!pdata || pdata->num_leds < 1)
++ return -ENODEV;
+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+ unsigned int ns)
-+{
-+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
++ leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
++ if (!leds)
++ return -ENOMEM;
+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+ struct mmc_data *data)
-+{
-+ static unsigned dtomul_to_shift[] = {
-+ 0, 4, 7, 8, 10, 12, 16, 20
-+ };
-+ unsigned timeout;
-+ unsigned dtocyc, dtomul;
++ for (i = 0; i < pdata->num_leds; i++) {
++ struct pwmled *led = leds + i;
++ const struct gpio_led *dat = pdata->leds + i;
++ u32 tmp;
+
-+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++ led->cdev.name = dat->name;
++ led->cdev.brightness = LED_OFF;
++ led->cdev.brightness_set = pwmled_brightness;
++ led->cdev.default_trigger = dat->default_trigger;
+
-+ for (dtomul = 0; dtomul < 8; dtomul++) {
-+ unsigned shift = dtomul_to_shift[dtomul];
-+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+ if (dtocyc < 15)
-+ break;
++ led->active_low = dat->active_low;
++
++ status = pwm_channel_alloc(dat->gpio, &led->pwmc);
++ if (status < 0)
++ goto err;
++
++ /*
++ * Prescale clock by 2^x, so PWM counts in low MHz.
++ * Start each cycle with the LED active, so increasing
++ * the duty cycle gives us more time on (== brighter).
++ */
++ tmp = 5;
++ if (!led->active_low)
++ tmp |= PWM_CPR_CPOL;
++ pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
++
++ /*
++ * Pick a period so PWM cycles at 100+ Hz; and a multiplier
++ * for scaling duty cycle: brightness * mult.
++ */
++ tmp = (led->pwmc.mck / (1 << 5)) / 100;
++ tmp /= 255;
++ led->mult = tmp;
++ pwm_channel_writel(&led->pwmc, PWM_CDTY,
++ led->cdev.brightness * 255);
++ pwm_channel_writel(&led->pwmc, PWM_CPRD,
++ LED_FULL * tmp);
++
++ pwm_channel_enable(&led->pwmc);
++
++ /* Hand it over to the LED framework */
++ status = led_classdev_register(&pdev->dev, &led->cdev);
++ if (status < 0) {
++ pwm_channel_free(&led->pwmc);
++ goto err;
++ }
+ }
+
-+ if (dtomul >= 8) {
-+ dtomul = 7;
-+ dtocyc = 15;
++ platform_set_drvdata(pdev, leds);
++ return 0;
++
++err:
++ while (i-- > 0) {
++ led_classdev_unregister(&leds[i].cdev);
++ pwm_channel_free(&leds[i].pwmc);
+ }
++ kfree(leds);
+
-+ pr_debug("%s: setting timeout to %u cycles\n",
-+ mmc_hostname(host->mmc),
-+ dtocyc << dtomul_to_shift[dtomul]);
-+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+ | MCI_BF(DTOCYC, dtocyc)));
++ return status;
+}
+
-+/*
-+ * Return mask with interrupt flags to be handled for this command.
-+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+ struct mmc_command *cmd,
-+ u32 *cmd_flags)
++static int __exit pwmled_remove(struct platform_device *pdev)
+{
-+ u32 cmdr;
-+ u32 iflags;
++ const struct gpio_led_platform_data *pdata;
++ struct pwmled *leds;
++ unsigned i;
+
-+ cmd->error = MMC_ERR_NONE;
++ pdata = pdev->dev.platform_data;
++ leds = platform_get_drvdata(pdev);
+
-+ cmdr = 0;
-+ BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
-+ cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
++ for (i = 0; i < pdata->num_leds; i++) {
++ struct pwmled *led = leds + i;
+
-+ if (cmd->flags & MMC_RSP_PRESENT) {
-+ if (cmd->flags & MMC_RSP_136)
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+ else
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++ led_classdev_unregister(&led->cdev);
++ pwm_channel_free(&led->pwmc);
+ }
+
-+ /*
-+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+ * it's too difficult to determine whether this is an ACMD or
-+ * not. Better make it 64.
-+ */
-+ cmdr |= MCI_BIT(MAXLAT);
-+
-+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+ cmdr |= MCI_BIT(OPDCMD);
-+
-+ iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
-+ if (!(cmd->flags & MMC_RSP_CRC))
-+ iflags &= ~MCI_BIT(RCRCE);
++ kfree(leds);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
+
-+ pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+ mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
-+ (unsigned long)cmdr);
++static struct platform_driver pwmled_driver = {
++ .driver = {
++ .name = "leds-atmel-pwm",
++ .owner = THIS_MODULE,
++ },
++ /* REVISIT add suspend() and resume() methods */
++ .remove = __exit_p(pwmled_remove),
++};
+
-+ *cmd_flags = cmdr;
-+ return iflags;
++static int __init modinit(void)
++{
++ return platform_driver_probe(&pwmled_driver, pwmled_probe);
+}
++module_init(modinit);
+
-+static void atmci_start_command(struct atmel_mci *host,
-+ struct mmc_command *cmd,
-+ u32 cmd_flags)
++static void __exit modexit(void)
+{
-+ WARN_ON(host->cmd);
-+ host->cmd = cmd;
++ platform_driver_unregister(&pwmled_driver);
++}
++module_exit(modexit);
+
-+ mci_writel(host, ARGR, cmd->arg);
-+ mci_writel(host, CMDR, cmd_flags);
++MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index b5e67c0..23a9231 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -13,6 +13,15 @@ menuconfig MISC_DEVICES
+
+ if MISC_DEVICES
+
++config ATMEL_PWM
++ tristate "Atmel AT32/AT91 PWM support"
++ depends on AVR32 || ARCH_AT91
++ help
++ This option enables device driver support for the PWM channels
++ on certain Atmel prcoessors. Pulse Width Modulation is used for
++ purposes including software controlled power-efficent backlights
++ on LCD displays, motor control, and waveform generation.
++
+ config IBM_ASM
+ tristate "Device driver for IBM RSA service processor"
+ depends on X86 && PCI && INPUT && EXPERIMENTAL
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index 87f2685..b4674c6 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/
+ obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/
+ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
+ obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
++obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
+ obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
+ obj-$(CONFIG_LKDTM) += lkdtm.o
+ obj-$(CONFIG_TIFM_CORE) += tifm_core.o
+diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
+new file mode 100644
+index 0000000..f8d3b9a
+--- /dev/null
++++ b/drivers/misc/atmel_pwm.c
+@@ -0,0 +1,409 @@
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_pwm.h>
+
-+ if (cmd->data)
-+ dma_start_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+}
+
+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
++ * This is a simple driver for the PWM controller found in various newer
++ * Atmel SOCs, including the AVR32 series and the AT91sam9263.
++ *
++ * Chips with current Linux ports have only 4 PWM channels, out of max 32.
++ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux).
++ * Docs are inconsistent about the width of the channel counter registers;
++ * it's at least 16 bits, but several places say 20 bits.
+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 cmd_flags;
++#define PWM_NCHAN 4 /* max 32 */
+
-+ WARN_ON(host->data);
-+ host->data = data;
++struct pwm {
++ spinlock_t lock;
++ struct platform_device *pdev;
++ u32 mask;
++ int irq;
++ void __iomem *base;
++ struct clk *clk;
++ struct pwm_channel *channel[PWM_NCHAN];
++ void (*handler[PWM_NCHAN])(struct pwm_channel *);
++};
+
-+ atmci_set_timeout(host, data);
-+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+ | MCI_BF(BLKLEN, data->blksz)));
-+ host->dma.req.block_size = data->blksz;
-+ host->dma.req.nr_blocks = data->blocks;
+
-+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+ if (data->flags & MMC_DATA_STREAM)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else if (data->blocks > 1)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ else
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
++/* global PWM controller registers */
++#define PWM_MR 0x00
++#define PWM_ENA 0x04
++#define PWM_DIS 0x08
++#define PWM_SR 0x0c
++#define PWM_IER 0x10
++#define PWM_IDR 0x14
++#define PWM_IMR 0x18
++#define PWM_ISR 0x1c
+
-+ if (data->flags & MMC_DATA_READ) {
-+ cmd_flags |= MCI_BIT(TRDIR);
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_FROM_DEVICE);
-+ host->dma.req.periph_id = host->dma.rx_periph_id;
-+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+ host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+ } else {
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_TO_DEVICE);
-+ host->dma.req.periph_id = host->dma.tx_periph_id;
-+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+ }
-+ host->dma.req.sg = data->sg;
++static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val)
++{
++ __raw_writel(val, p->base + offset);
++}
+
-+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++static inline u32 pwm_readl(const struct pwm *p, unsigned offset)
++{
++ return __raw_readl(p->base + offset);
++}
+
-+ return cmd_flags;
++static inline void __iomem *pwmc_regs(const struct pwm *p, int index)
++{
++ return p->base + 0x200 + index * 0x20;
+}
+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++static struct pwm *pwm;
++
++static void pwm_dumpregs(struct pwm_channel *ch, char *tag)
+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_data *data = mrq->data;
-+ u32 iflags;
-+ u32 cmdflags = 0;
++ struct device *dev = &pwm->pdev->dev;
++
++ dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n",
++ tag,
++ pwm_readl(pwm, PWM_MR),
++ pwm_readl(pwm, PWM_SR),
++ pwm_readl(pwm, PWM_IMR));
++ dev_dbg(dev,
++ "pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n",
++ ch->index,
++ pwm_channel_readl(ch, PWM_CMR),
++ pwm_channel_readl(ch, PWM_CDTY),
++ pwm_channel_readl(ch, PWM_CPRD),
++ pwm_channel_readl(ch, PWM_CCNT));
++}
+
-+ iflags = mci_readl(host, IMR);
-+ if (iflags)
-+ printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
+
-+ WARN_ON(host->mrq != NULL);
-+ host->mrq = mrq;
-+ host->pending_events = 0;
-+ host->completed_events = 0;
++/**
++ * pwm_channel_alloc - allocate an unused PWM channel
++ * @index: identifies the channel
++ * @ch: structure to be initialized
++ *
++ * Drivers allocate PWM channels according to the board's wiring, and
++ * matching board-specific setup code. Returns zero or negative errno.
++ */
++int pwm_channel_alloc(int index, struct pwm_channel *ch)
++{
++ unsigned long flags;
++ int status = 0;
++
++ /* insist on PWM init, with this signal pinned out */
++ if (!pwm || !(pwm->mask & 1 << index))
++ return -ENODEV;
++
++ if (index < 0 || index >= PWM_NCHAN || !ch)
++ return -EINVAL;
++ memset(ch, 0, sizeof *ch);
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ if (pwm->channel[index])
++ status = -EBUSY;
++ else {
++ clk_enable(pwm->clk);
+
-+ iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
++ ch->regs = pwmc_regs(pwm, index);
++ ch->index = index;
+
-+ if (mrq->stop) {
-+ BUG_ON(!data);
++ /* REVISIT: ap7000 seems to go 2x as fast as we expect!! */
++ ch->mck = clk_get_rate(pwm->clk);
+
-+ host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
-+ &host->stop_cmdr);
-+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+ if (!(data->flags & MMC_DATA_WRITE))
-+ host->stop_cmdr |= MCI_BIT(TRDIR);
-+ if (data->flags & MMC_DATA_STREAM)
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ }
-+ if (data) {
-+ cmdflags |= atmci_prepare_data(mmc, data);
-+ iflags |= MCI_DATA_ERROR_FLAGS;
-+ }
++ pwm->channel[index] = ch;
++ pwm->handler[index] = NULL;
+
-+ atmci_start_command(host, mrq->cmd, cmdflags);
-+ mci_writel(host, IER, iflags);
++ /* channel and irq are always disabled when we return */
++ pwm_writel(pwm, PWM_DIS, 1 << index);
++ pwm_writel(pwm, PWM_IDR, 1 << index);
++ }
++ spin_unlock_irqrestore(&pwm->lock, flags);
++ return status;
+}
++EXPORT_SYMBOL(pwm_channel_alloc);
+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++static int pwmcheck(struct pwm_channel *ch)
+{
-+ struct atmel_mci *host = mmc_priv(mmc);
++ int index;
+
-+ if (ios->clock) {
-+ u32 clkdiv;
++ if (!pwm)
++ return -ENODEV;
++ if (!ch)
++ return -EINVAL;
++ index = ch->index;
++ if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch)
++ return -EINVAL;
+
-+ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
-+ if (clkdiv > 255)
-+ clkdiv = 255;
-+ mci_writel(host, MR, (clkdiv
-+ | MCI_BIT(WRPROOF)
-+ | MCI_BIT(RDPROOF)));
-+ }
++ return index;
++}
+
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ mci_writel(host, SDCR, 0);
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+ break;
-+ }
++/**
++ * pwm_channel_free - release a previously allocated channel
++ * @ch: the channel being released
++ *
++ * The channel is completely shut down (counter and IRQ disabled),
++ * and made available for re-use. Returns zero, or negative errno.
++ */
++int pwm_channel_free(struct pwm_channel *ch)
++{
++ unsigned long flags;
++ int t;
+
-+ switch (ios->power_mode) {
-+ case MMC_POWER_OFF:
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ break;
-+ case MMC_POWER_UP:
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ break;
-+ case MMC_POWER_ON:
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ break;
++ spin_lock_irqsave(&pwm->lock, flags);
++ t = pwmcheck(ch);
++ if (t >= 0) {
++ pwm->channel[t] = NULL;
++ pwm->handler[t] = NULL;
++
++ /* channel and irq are always disabled when we return */
++ pwm_writel(pwm, PWM_DIS, 1 << t);
++ pwm_writel(pwm, PWM_IDR, 1 << t);
++
++ clk_disable(pwm->clk);
++ t = 0;
+ }
++ spin_unlock_irqrestore(&pwm->lock, flags);
++ return t;
+}
++EXPORT_SYMBOL(pwm_channel_free);
+
-+static int atmci_get_ro(struct mmc_host *mmc)
++int __pwm_channel_onoff(struct pwm_channel *ch, int enabled)
+{
-+ int read_only = 0;
-+ struct atmel_mci *host = mmc_priv(mmc);
++ unsigned long flags;
++ int t;
+
-+ if (host->wp_pin >= 0) {
-+ read_only = gpio_get_value(host->wp_pin);
-+ pr_debug("%s: card is %s\n", mmc_hostname(mmc),
-+ read_only ? "read-only" : "read-write");
-+ } else {
-+ pr_debug("%s: no pin for checking read-only switch."
-+ " Assuming write-enable.\n", mmc_hostname(mmc));
++ /* OMITTED FUNCTIONALITY: starting several channels in synch */
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ t = pwmcheck(ch);
++ if (t >= 0) {
++ pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t);
++ t = 0;
++ pwm_dumpregs(ch, enabled ? "enable" : "disable");
+ }
++ spin_unlock_irqrestore(&pwm->lock, flags);
+
-+ return read_only;
++ return t;
+}
++EXPORT_SYMBOL(__pwm_channel_onoff);
+
-+static struct mmc_host_ops atmci_ops = {
-+ .request = atmci_request,
-+ .set_ios = atmci_set_ios,
-+ .get_ro = atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++/**
++ * pwm_clk_alloc - allocate and configure CLKA or CLKB
++ * @prescale: from 0..10, the power of two used to divide MCK
++ * @div: from 1..255, the linear divisor to use
++ *
++ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno. The allocated
++ * clock will run with a period of (2^prescale * div) / MCK, or twice as
++ * long if center aligned PWM output is used. The clock must later be
++ * deconfigured using pwm_clk_free().
++ */
++int pwm_clk_alloc(unsigned prescale, unsigned div)
+{
-+ struct atmel_mci *host = mmc_priv(mmc);
++ unsigned long flags;
++ u32 mr;
++ u32 val = (prescale << 8) | div;
++ int ret = -EBUSY;
+
-+ WARN_ON(host->cmd || host->data);
-+ host->mrq = NULL;
++ if (prescale >= 10 || div == 0 || div > 255)
++ return -EINVAL;
+
-+ mmc_request_done(mmc, mrq);
++ spin_lock_irqsave(&pwm->lock, flags);
++ mr = pwm_readl(pwm, PWM_MR);
++ if ((mr & 0xffff) == 0) {
++ mr |= val;
++ ret = PWM_CPR_CLKA;
++ }
++ if ((mr & (0xffff << 16)) == 0) {
++ mr |= val << 16;
++ ret = PWM_CPR_CLKB;
++ }
++ if (ret > 0)
++ pwm_writel(pwm, PWM_MR, mr);
++ spin_unlock_irqrestore(&pwm->lock, flags);
++ return ret;
+}
++EXPORT_SYMBOL(pwm_clk_alloc);
+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+ u32 flags)
++/**
++ * pwm_clk_free - deconfigure and release CLKA or CLKB
++ *
++ * Reverses the effect of pwm_clk_alloc().
++ */
++void pwm_clk_free(unsigned clk)
+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+ mci_writel(host, IER, host->stop_iflags);
++ unsigned long flags;
++ u32 mr;
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ mr = pwm_readl(pwm, PWM_MR);
++ if (clk == PWM_CPR_CLKA)
++ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0));
++ if (clk == PWM_CPR_CLKB)
++ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16));
++ spin_unlock_irqrestore(&pwm->lock, flags);
+}
++EXPORT_SYMBOL(pwm_clk_free);
+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++/**
++ * pwm_channel_handler - manage channel's IRQ handler
++ * @ch: the channel
++ * @handler: the handler to use, possibly NULL
++ *
++ * If the handler is non-null, the handler will be called after every
++ * period of this PWM channel. If the handler is null, this channel
++ * won't generate an IRQ.
++ */
++int pwm_channel_handler(struct pwm_channel *ch,
++ void (*handler)(struct pwm_channel *ch))
+{
-+ host->data = NULL;
-+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+ ((data->flags & MMC_DATA_WRITE)
-+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++ unsigned long flags;
++ int t;
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ t = pwmcheck(ch);
++ if (t >= 0) {
++ pwm->handler[t] = handler;
++ pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t);
++ t = 0;
++ }
++ spin_unlock_irqrestore(&pwm->lock, flags);
+
-+ /*
-+ * Data might complete before command for very short transfers
-+ * (like READ_SCR)
-+ */
-+ if (mci_cmd_is_complete(host)
-+ && (!data->stop || mci_stop_is_complete(host)))
-+ atmci_request_end(host->mmc, data->mrq);
++ return t;
+}
++EXPORT_SYMBOL(pwm_channel_handler);
+
-+static void atmci_command_error(struct mmc_host *mmc,
-+ struct mmc_command *cmd,
-+ u32 status)
++static irqreturn_t pwm_irq(int id, void *_pwm)
+{
-+ pr_debug("%s: command error: status=0x%08x\n",
-+ mmc_hostname(mmc), status);
++ struct pwm *p = _pwm;
++ irqreturn_t handled = IRQ_NONE;
++ u32 irqstat;
++ int index;
++
++ spin_lock(&p->lock);
++
++ /* ack irqs, then handle them */
++ irqstat = pwm_readl(pwm, PWM_ISR);
++
++ while (irqstat) {
++ struct pwm_channel *ch;
++ void (*handler)(struct pwm_channel *ch);
++
++ index = ffs(irqstat) - 1;
++ irqstat &= ~(1 << index);
++ ch = pwm->channel[index];
++ handler = pwm->handler[index];
++ if (handler && ch) {
++ spin_unlock(&p->lock);
++ handler(ch);
++ spin_lock(&p->lock);
++ handled = IRQ_HANDLED;
++ }
++ }
+
-+ if (status & MCI_BIT(RTOE))
-+ cmd->error = MMC_ERR_TIMEOUT;
-+ else if (status & MCI_BIT(RCRCE))
-+ cmd->error = MMC_ERR_BADCRC;
-+ else
-+ cmd->error = MMC_ERR_FAILED;
++ spin_unlock(&p->lock);
++ return handled;
+}
+
-+static void atmci_tasklet_func(unsigned long priv)
++static int __init pwm_probe(struct platform_device *pdev)
+{
-+ struct mmc_host *mmc = (struct mmc_host *)priv;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_request *mrq = host->mrq;
-+ struct mmc_data *data = host->data;
++ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ int irq = platform_get_irq(pdev, 0);
++ u32 *mp = pdev->dev.platform_data;
++ struct pwm *p;
++ int status = -EIO;
+
-+ pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
-+ host->pending_events, host->completed_events,
-+ mci_readl(host, IMR));
++ if (pwm)
++ return -EBUSY;
++ if (!r || irq < 0 || !mp || !*mp)
++ return -ENODEV;
++ if (*mp & ~((1<<PWM_NCHAN)-1)) {
++ dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n",
++ *mp, PWM_NCHAN);
++ return -EINVAL;
++ }
+
-+ if (mci_clear_cmd_error_is_pending(host)) {
-+ struct mmc_command *cmd;
++ p = kzalloc(sizeof(*p), GFP_KERNEL);
++ if (!p)
++ return -ENOMEM;
+
-+ mci_set_cmd_error_complete(host);
-+ mci_clear_cmd_pending(host);
-+ cmd = host->mrq->cmd;
++ spin_lock_init(&p->lock);
++ p->pdev = pdev;
++ p->mask = *mp;
++ p->irq = irq;
++ p->base = ioremap(r->start, r->end - r->start + 1);
++ if (!p->base)
++ goto fail;
++ p->clk = clk_get(&pdev->dev, "mck");
++ if (IS_ERR(p->clk)) {
++ status = PTR_ERR(p->clk);
++ p->clk = NULL;
++ goto fail;
++ }
+
-+ if (cmd->data) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data = NULL;
-+ }
++ status = request_irq(irq, pwm_irq, 0, pdev->name, p);
++ if (status < 0)
++ goto fail;
+
-+ atmci_command_error(mmc, cmd, host->error_status);
-+ atmci_request_end(mmc, cmd->mrq);
-+ }
-+ if (mci_clear_stop_error_is_pending(host)) {
-+ mci_set_stop_error_complete(host);
-+ mci_clear_stop_pending(host);
-+ atmci_command_error(mmc, host->mrq->stop,
-+ host->error_status);
-+ if (!host->data)
-+ atmci_request_end(mmc, host->mrq);
-+ }
-+ if (mci_clear_cmd_is_pending(host)) {
-+ mci_set_cmd_complete(host);
-+ if (!mrq->data || mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_stop_is_pending(host)) {
-+ mci_set_stop_complete(host);
-+ if (mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_dma_error_is_pending(host)) {
-+ mci_set_dma_error_complete(host);
-+ mci_clear_data_pending(host);
++ pwm = p;
++ platform_set_drvdata(pdev, p);
+
-+ /* DMA controller got bus error => invalid address */
-+ data->error = MMC_ERR_INVALID;
++ return 0;
+
-+ printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
-+ mmc_hostname(mmc), host->data->bytes_xfered);
++fail:
++ if (p->clk)
++ clk_put(p->clk);
++ if (p->base)
++ iounmap(p->base);
+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
++ kfree(p);
++ return status;
++}
+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_error_is_pending(host)) {
-+ u32 status = host->error_status;
++static int __exit pwm_remove(struct platform_device *pdev)
++{
++ struct pwm *p = platform_get_drvdata(pdev);
+
-+ mci_set_data_error_complete(host);
-+ mci_clear_data_pending(host);
++ if (p != pwm)
++ return -EINVAL;
+
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
++ clk_enable(pwm->clk);
++ pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1);
++ pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1);
++ clk_disable(pwm->clk);
+
-+ printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
-+ mmc_hostname(host->mmc), status);
++ pwm = NULL;
+
-+ if (status & MCI_BIT(DCRCE)) {
-+ printk(KERN_DEBUG "%s: Data CRC error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_BADCRC;
-+ } else if (status & MCI_BIT(DTOE)) {
-+ printk(KERN_DEBUG "%s: Data Timeout error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_TIMEOUT;
-+ } else {
-+ printk(KERN_DEBUG "%s: Data FIFO error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_FIFO;
-+ }
-+ printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
-+ mmc_hostname(host->mmc), data->bytes_xfered);
++ free_irq(p->irq, p);
++ clk_put(p->clk);
++ iounmap(p->base);
++ kfree(p);
+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
++ return 0;
++}
+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_is_pending(host)) {
-+ mci_set_data_complete(host);
-+ data->bytes_xfered = data->blocks * data->blksz;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_card_detect_is_pending(host)) {
-+ /* Reset controller if card is gone */
-+ if (!host->present) {
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ }
++static struct platform_driver atmel_pwm_driver = {
++ .driver = {
++ .name = "atmel_pwm",
++ .owner = THIS_MODULE,
++ },
++ .remove = __exit_p(pwm_remove),
+
-+ /* Clean up queue if present */
-+ if (mrq) {
-+ if (!mci_cmd_is_complete(host)
-+ && !mci_cmd_error_is_complete(host)) {
-+ mrq->cmd->error = MMC_ERR_TIMEOUT;
-+ }
-+ if (mrq->data && !mci_data_is_complete(host)
-+ && !mci_data_error_is_complete(host)) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data->error = MMC_ERR_TIMEOUT;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mrq->stop && !mci_stop_is_complete(host)
-+ && !mci_stop_error_is_complete(host)) {
-+ mrq->stop->error = MMC_ERR_TIMEOUT;
-+ }
++ /* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states;
++ * and all AT91sam9263 states, albeit at reduced clock rate if
++ * MCK becomes the slow clock (i.e. what Linux labels STR).
++ */
++};
+
-+ host->cmd = NULL;
-+ atmci_request_end(mmc, mrq);
-+ }
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-+ }
++static int __init pwm_init(void)
++{
++ return platform_driver_probe(&atmel_pwm_driver, pwm_probe);
+}
++module_init(pwm_init);
+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++static void __exit pwm_exit(void)
+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_command *cmd = host->cmd;
++ platform_driver_unregister(&atmel_pwm_driver);
++}
++module_exit(pwm_exit);
+
-+ /*
-+ * Read the response now so that we're free to send a new
-+ * command immediately.
-+ */
-+ cmd->resp[0] = mci_readl(host, RSPR);
-+ cmd->resp[1] = mci_readl(host, RSPR);
-+ cmd->resp[2] = mci_readl(host, RSPR);
-+ cmd->resp[3] = mci_readl(host, RSPR);
++MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 5fef678..4970b53 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -91,6 +91,16 @@ config MMC_AT91
+
+ If unsure, say N.
+
++config MMC_ATMELMCI
++ tristate "Atmel Multimedia Card Interface support"
++ depends on AVR32 && MMC
++ help
++ This selects the Atmel Multimedia Card Interface. If you have
++ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++ slot, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_IMX
+ tristate "Motorola i.MX Multimedia Card Interface support"
+ depends on ARCH_IMX
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index 3877c87..e80ea72 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+ obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+
+diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
+new file mode 100644
+index 0000000..0b5ec58
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.c
+@@ -0,0 +1,1176 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <linux/mmc/host.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
+
-+ mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
-+ host->cmd = NULL;
++#include "atmel-mci.h"
+
-+ if (mci_stop_sent_is_complete(host))
-+ mci_set_stop_pending(host);
-+ else
-+ mci_set_cmd_pending(host);
++#define DRIVER_NAME "atmel_mci"
+
-+ tasklet_schedule(&host->tasklet);
-+}
++#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
++ MCI_BIT(OVRE) | MCI_BIT(UNRE))
+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+ struct mmc_data *data;
++enum {
++ EVENT_CMD_COMPLETE = 0,
++ EVENT_DATA_COMPLETE,
++ EVENT_DATA_ERROR,
++ EVENT_STOP_SENT,
++ EVENT_STOP_COMPLETE,
++ EVENT_DMA_COMPLETE,
++ EVENT_DMA_ERROR,
++ EVENT_CARD_DETECT,
++};
+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+ data = host->data;
++struct atmel_mci_dma {
++ struct dma_request_sg req;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
+
-+ if (data->stop && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, data, 0);
++struct atmel_mci {
++ struct mmc_host *mmc;
++ void __iomem *regs;
++ struct atmel_mci_dma dma;
+
-+ if (data->flags & MMC_DATA_READ) {
-+ mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ } else {
-+ /*
-+ * For the WRITE case, wait for NOTBUSY. This function
-+ * is called when everything has been written to the
-+ * controller, not when the card is done programming.
-+ */
-+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
-+ }
-+}
++ struct mmc_request *mrq;
++ struct mmc_command *cmd;
++ struct mmc_data *data;
+
-+static void atmci_dma_error(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
++ u32 cmd_status;
++ u32 data_status;
++ u32 stop_status;
++ u32 stop_cmdr;
+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
++ struct tasklet_struct tasklet;
++ unsigned long pending_events;
++ unsigned long completed_events;
+
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
++ int present;
++ int detect_pin;
++ int wp_pin;
+
-+ mci_set_dma_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+}
++ unsigned long bus_hz;
++ unsigned long mapbase;
++ struct clk *mck;
++ struct platform_device *pdev;
+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 status, mask, pending;
++#ifdef CONFIG_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++ struct dentry *debugfs_req;
++ struct dentry *debugfs_pending_events;
++ struct dentry *debugfs_completed_events;
++#endif
++};
+
-+ spin_lock(&mmc->lock);
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host) \
++ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_data_is_complete(host) \
++ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host) \
++ test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host) \
++ test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host) \
++ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_dma_is_complete(host) \
++ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_dma_error_is_complete(host) \
++ test_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_card_detect_is_complete(host) \
++ test_bit(EVENT_CARD_DETECT, &host->completed_events)
+
-+ do {
-+ if (pending & MCI_CMD_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(CMDRDY)
-+ | MCI_BIT(NOTBUSY)
-+ | MCI_CMD_ERROR_FLAGS
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->error_status = status;
-+ host->cmd = NULL;
-+ if (mci_stop_sent_is_complete(host))
-+ mci_set_stop_error_pending(host);
-+ else
-+ mci_set_cmd_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_DATA_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->error_status = status;
-+ mci_set_data_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_BIT(CMDRDY))
-+ atmci_cmd_interrupt(mmc, status);
-+ if (pending & MCI_BIT(NOTBUSY)) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host) \
++ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_is_pending(host) \
++ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+ } while (pending);
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host) \
++ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_is_completed(host) \
++ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_is_completed(host) \
++ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
+
-+ spin_unlock(&mmc->lock);
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_complete(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host) \
++ set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host) \
++ set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_complete(host) \
++ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_complete(host) \
++ set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_complete(host) \
++ set_bit(EVENT_CARD_DETECT, &host->completed_events)
+
-+ return IRQ_HANDLED;
-+}
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_data_pending(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host) \
++ set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host) \
++ set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_dma_error_pending(host) \
++ set_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_set_card_detect_pending(host) \
++ set_bit(EVENT_CARD_DETECT, &host->pending_events)
+
-+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host) \
++ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_pending(host) \
++ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host) \
++ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host) \
++ clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host) \
++ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_pending(host) \
++ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_pending(host) \
++ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
+
-+ int present = !gpio_get_value(irq_to_gpio(irq));
+
-+ if (present != host->present) {
-+ pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
-+ present ? "inserted" : "removed");
-+ host->present = present;
-+ mci_set_card_detect_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
-+ return IRQ_HANDLED;
-+}
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+ struct mci_platform_data *board;
-+ struct atmel_mci *host;
-+ struct mmc_host *mmc;
-+ struct resource *regs;
-+ int irq;
-+ int ret;
++#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
++struct req_dbg_data {
++ unsigned int nbytes;
++ char str[DBG_REQ_BUF_SIZE];
++};
+
-+ board = pdev->dev.platform_data;
++static int req_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ struct mmc_request *mrq;
++ struct mmc_command *cmd, *stop;
++ struct mmc_data *data;
++ struct req_dbg_data *priv;
++ char *str;
++ unsigned long n = 0;
+
-+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+ if (!mmc)
++ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++ if (!priv)
+ return -ENOMEM;
++ str = priv->str;
+
-+ host = mmc_priv(mmc);
-+ host->pdev = pdev;
-+ host->mmc = mmc;
-+ if (board) {
-+ host->detect_pin = board->detect_pin;
-+ host->wp_pin = board->wp_pin;
-+ } else {
-+ host->detect_pin = -1;
-+ host->detect_pin = -1;
-+ }
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
+
-+ host->mck = clk_get(&pdev->dev, "mci_clk");
-+ if (IS_ERR(host->mck)) {
-+ ret = PTR_ERR(host->mck);
-+ goto out_free_host;
++ spin_lock_irq(&host->mmc->lock);
++ mrq = host->mrq;
++ if (mrq) {
++ cmd = mrq->cmd;
++ data = mrq->data;
++ stop = mrq->stop;
++ n = snprintf(str, DBG_REQ_BUF_SIZE,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ cmd->opcode, cmd->arg, cmd->flags,
++ cmd->resp[0], cmd->resp[1], cmd->resp[2],
++ cmd->resp[3], cmd->error);
++ if (n < DBG_REQ_BUF_SIZE && data)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "DATA %u * %u (%u) %x (err %u)\n",
++ data->blocks, data->blksz,
++ data->bytes_xfered, data->flags,
++ data->error);
++ if (n < DBG_REQ_BUF_SIZE && stop)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ stop->opcode, stop->arg, stop->flags,
++ stop->resp[0], stop->resp[1],
++ stop->resp[2], stop->resp[3],
++ stop->error);
+ }
-+ clk_enable(host->mck);
++ spin_unlock_irq(&host->mmc->lock);
++ mutex_unlock(&inode->i_mutex);
+
-+ ret = -ENOMEM;
-+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!host->regs)
-+ goto out_disable_clk;
++ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++ file->private_data = priv;
+
-+ host->bus_hz = clk_get_rate(host->mck);
-+ host->mapbase = regs->start;
++ return 0;
++}
+
-+ mmc->ops = &atmci_ops;
-+ mmc->f_min = (host->bus_hz + 511) / 512;
-+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+ mmc->ocr_avail = 0x00100000;
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct req_dbg_data *priv = file->private_data;
+
-+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++ return simple_read_from_buffer(buf, nbytes, ppos,
++ priv->str, priv->nbytes);
++}
+
-+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+ if (ret)
-+ goto out_unmap;
++static int req_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
+
-+ /* Assume card is present if we don't have a detect pin */
-+ host->present = 1;
-+ if (host->detect_pin >= 0) {
-+ if (gpio_request(host->detect_pin, "mmc_detect")) {
-+ printk(KERN_WARNING "%s: no detect pin available\n",
-+ mmc_hostname(host->mmc));
-+ host->detect_pin = -1;
-+ } else {
-+ host->present = !gpio_get_value(host->detect_pin);
-+ }
-+ }
-+ if (host->wp_pin >= 0) {
-+ if (gpio_request(host->wp_pin, "mmc_wp")) {
-+ printk(KERN_WARNING "%s: no WP pin available\n",
-+ mmc_hostname(host->mmc));
-+ host->wp_pin = -1;
-+ }
-+ }
++static const struct file_operations req_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = req_dbg_open,
++ .llseek = no_llseek,
++ .read = req_dbg_read,
++ .release = req_dbg_release,
++};
+
-+ /* TODO: Get this information from platform data */
-+ ret = -ENOMEM;
-+ host->dma.req.req.dmac = find_dma_controller(0);
-+ if (!host->dma.req.req.dmac) {
-+ printk(KERN_ERR
-+ "mmci: No DMA controller available, aborting\n");
-+ goto out_free_irq;
-+ }
-+ ret = dma_alloc_channel(host->dma.req.req.dmac);
-+ if (ret < 0) {
-+ printk(KERN_ERR
-+ "mmci: Unable to allocate DMA channel, aborting\n");
-+ goto out_free_irq;
-+ }
-+ host->dma.req.req.channel = ret;
-+ host->dma.req.width = DMA_WIDTH_32BIT;
-+ host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+ host->dma.req.req.error = atmci_dma_error;
-+ host->dma.rx_periph_id = 0;
-+ host->dma.tx_periph_id = 1;
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
+
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
+
-+ platform_set_drvdata(pdev, host);
++ spin_lock_irq(&host->mmc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(host->regs + i * 4);
++ spin_unlock_irq(&host->mmc->lock);
+
-+ mmc_add_host(mmc);
++ file->private_data = data;
++ ret = 0;
+
-+ if (host->detect_pin >= 0) {
-+ ret = request_irq(gpio_to_irq(host->detect_pin),
-+ atmci_detect_change,
-+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+ DRIVER_NAME, mmc);
-+ if (ret) {
-+ printk(KERN_ERR
-+ "%s: could not request IRQ %d for detect pin\n",
-+ mmc_hostname(mmc),
-+ gpio_to_irq(host->detect_pin));
-+ gpio_free(host->detect_pin);
-+ host->detect_pin = -1;
-+ }
-+ }
++out:
++ mutex_unlock(&inode->i_mutex);
+
-+ printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
-+ mmc_hostname(mmc), host->mapbase, irq);
++ return ret;
++}
+
-+ atmci_init_debugfs(host);
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
+
-+ return 0;
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
+
-+out_free_irq:
-+ if (host->detect_pin >= 0)
-+ gpio_free(host->detect_pin);
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+ free_irq(irq, mmc);
-+out_unmap:
-+ iounmap(host->regs);
-+out_disable_clk:
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+out_free_host:
-+ mmc_free_host(mmc);
+ return ret;
+}
+
-+static int __devexit atmci_remove(struct platform_device *pdev)
++static int regs_dbg_release(struct inode *inode, struct file *file)
+{
-+ struct atmel_mci *host = platform_get_drvdata(pdev);
++ kfree(file->private_data);
++ return 0;
++}
+
-+ platform_set_drvdata(pdev, NULL);
++static const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
+
-+ if (host) {
-+ atmci_cleanup_debugfs(host);
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++ struct mmc_host *mmc;
++ struct dentry *root, *regs;
++ struct resource *res;
+
-+ if (host->detect_pin >= 0) {
-+ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+ cancel_delayed_work(&host->mmc->detect);
-+ gpio_free(host->detect_pin);
-+ }
++ mmc = host->mmc;
++ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ host->debugfs_root = root;
+
-+ mmc_remove_host(host->mmc);
++ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops);
++ if (!regs)
++ goto err_regs;
+
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ mci_readl(host, SR);
++ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++ regs->d_inode->i_size = res->end - res->start + 1;
++ host->debugfs_regs = regs;
+
-+ dma_release_channel(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
++ host->debugfs_req = debugfs_create_file("req", 0400, root,
++ host, &req_dbg_fops);
++ if (!host->debugfs_req)
++ goto err_req;
+
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
++ host->debugfs_pending_events
++ = debugfs_create_u32("pending_events", 0400, root,
++ (u32 *)&host->pending_events);
++ if (!host->debugfs_pending_events)
++ goto err_pending_events;
+
-+ free_irq(platform_get_irq(pdev, 0), host->mmc);
-+ iounmap(host->regs);
++ host->debugfs_completed_events
++ = debugfs_create_u32("completed_events", 0400, root,
++ (u32 *)&host->completed_events);
++ if (!host->debugfs_completed_events)
++ goto err_completed_events;
+
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
++ return;
++
++err_completed_events:
++ debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++ debugfs_remove(host->debugfs_req);
++err_req:
++ debugfs_remove(host->debugfs_regs);
++err_regs:
++ debugfs_remove(host->debugfs_root);
++err_root:
++ host->debugfs_root = NULL;
++ dev_err(&host->pdev->dev,
++ "failed to initialize debugfs for %s\n",
++ mmc_hostname(mmc));
++}
+
-+ mmc_free_host(host->mmc);
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++ if (host->debugfs_root) {
++ debugfs_remove(host->debugfs_completed_events);
++ debugfs_remove(host->debugfs_pending_events);
++ debugfs_remove(host->debugfs_req);
++ debugfs_remove(host->debugfs_regs);
++ debugfs_remove(host->debugfs_root);
++ host->debugfs_root = NULL;
+ }
-+ return 0;
+}
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
++{
+
-+static struct platform_driver atmci_driver = {
-+ .probe = atmci_probe,
-+ .remove = __devexit_p(atmci_remove),
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ },
-+};
++}
+
-+static int __init atmci_init(void)
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
+{
-+ return platform_driver_register(&atmci_driver);
++
+}
++#endif /* CONFIG_DEBUG_FS */
+
-+static void __exit atmci_exit(void)
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++ unsigned int ns)
+{
-+ platform_driver_unregister(&atmci_driver);
++ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
+}
+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
-diff -x .git -Nur linux-2.6.22.1/drivers/mmc/host/atmel-mci.h linux-avr32.git/drivers/mmc/host/atmel-mci.h
---- linux-2.6.22.1/drivers/mmc/host/atmel-mci.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/mmc/host/atmel-mci.h 2007-07-12 14:00:03.000000000 +0200
-@@ -0,0 +1,192 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR 0x0000
-+#define MCI_MR 0x0004
-+#define MCI_DTOR 0x0008
-+#define MCI_SDCR 0x000c
-+#define MCI_ARGR 0x0010
-+#define MCI_CMDR 0x0014
-+#define MCI_BLKR 0x0018
-+#define MCI_RSPR 0x0020
-+#define MCI_RSPR1 0x0024
-+#define MCI_RSPR2 0x0028
-+#define MCI_RSPR3 0x002c
-+#define MCI_RDR 0x0030
-+#define MCI_TDR 0x0034
-+#define MCI_SR 0x0040
-+#define MCI_IER 0x0044
-+#define MCI_IDR 0x0048
-+#define MCI_IMR 0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET 0
-+#define MCI_MCIEN_SIZE 1
-+#define MCI_MCIDIS_OFFSET 1
-+#define MCI_MCIDIS_SIZE 1
-+#define MCI_PWSEN_OFFSET 2
-+#define MCI_PWSEN_SIZE 1
-+#define MCI_PWSDIS_OFFSET 3
-+#define MCI_PWSDIS_SIZE 1
-+#define MCI_SWRST_OFFSET 7
-+#define MCI_SWRST_SIZE 1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET 0
-+#define MCI_CLKDIV_SIZE 8
-+#define MCI_PWSDIV_OFFSET 8
-+#define MCI_PWSDIV_SIZE 3
-+#define MCI_RDPROOF_OFFSET 11
-+#define MCI_RDPROOF_SIZE 1
-+#define MCI_WRPROOF_OFFSET 12
-+#define MCI_WRPROOF_SIZE 1
-+#define MCI_DMAPADV_OFFSET 14
-+#define MCI_DMAPADV_SIZE 1
-+#define MCI_BLKLEN_OFFSET 16
-+#define MCI_BLKLEN_SIZE 16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET 0
-+#define MCI_DTOCYC_SIZE 4
-+#define MCI_DTOMUL_OFFSET 4
-+#define MCI_DTOMUL_SIZE 3
-+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET 0
-+#define MCI_SDCSEL_SIZE 4
-+#define MCI_SDCBUS_OFFSET 7
-+#define MCI_SDCBUS_SIZE 1
-+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET 0
-+#define MCI_ARG_SIZE 32
-+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET 0
-+#define MCI_CMDNB_SIZE 6
-+#define MCI_RSPTYP_OFFSET 6
-+#define MCI_RSPTYP_SIZE 2
-+#define MCI_SPCMD_OFFSET 8
-+#define MCI_SPCMD_SIZE 3
-+#define MCI_OPDCMD_OFFSET 11
-+#define MCI_OPDCMD_SIZE 1
-+#define MCI_MAXLAT_OFFSET 12
-+#define MCI_MAXLAT_SIZE 1
-+#define MCI_TRCMD_OFFSET 16
-+#define MCI_TRCMD_SIZE 2
-+#define MCI_TRDIR_OFFSET 18
-+#define MCI_TRDIR_SIZE 1
-+#define MCI_TRTYP_OFFSET 19
-+#define MCI_TRTYP_SIZE 2
++static void atmci_set_timeout(struct atmel_mci *host,
++ struct mmc_data *data)
++{
++ static unsigned dtomul_to_shift[] = {
++ 0, 4, 7, 8, 10, 12, 16, 20
++ };
++ unsigned timeout;
++ unsigned dtocyc, dtomul;
+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET 0
-+#define MCI_BCNT_SIZE 16
++ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET 0
-+#define MCI_RSP_SIZE 32
++ for (dtomul = 0; dtomul < 8; dtomul++) {
++ unsigned shift = dtomul_to_shift[dtomul];
++ dtocyc = (timeout + (1 << shift) - 1) >> shift;
++ if (dtocyc < 15)
++ break;
++ }
+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET 0
-+#define MCI_CMDRDY_SIZE 1
-+#define MCI_RXRDY_OFFSET 1
-+#define MCI_RXRDY_SIZE 1
-+#define MCI_TXRDY_OFFSET 2
-+#define MCI_TXRDY_SIZE 1
-+#define MCI_BLKE_OFFSET 3
-+#define MCI_BLKE_SIZE 1
-+#define MCI_DTIP_OFFSET 4
-+#define MCI_DTIP_SIZE 1
-+#define MCI_NOTBUSY_OFFSET 5
-+#define MCI_NOTBUSY_SIZE 1
-+#define MCI_ENDRX_OFFSET 6
-+#define MCI_ENDRX_SIZE 1
-+#define MCI_ENDTX_OFFSET 7
-+#define MCI_ENDTX_SIZE 1
-+#define MCI_RXBUFF_OFFSET 14
-+#define MCI_RXBUFF_SIZE 1
-+#define MCI_TXBUFE_OFFSET 15
-+#define MCI_TXBUFE_SIZE 1
-+#define MCI_RINDE_OFFSET 16
-+#define MCI_RINDE_SIZE 1
-+#define MCI_RDIRE_OFFSET 17
-+#define MCI_RDIRE_SIZE 1
-+#define MCI_RCRCE_OFFSET 18
-+#define MCI_RCRCE_SIZE 1
-+#define MCI_RENDE_OFFSET 19
-+#define MCI_RENDE_SIZE 1
-+#define MCI_RTOE_OFFSET 20
-+#define MCI_RTOE_SIZE 1
-+#define MCI_DCRCE_OFFSET 21
-+#define MCI_DCRCE_SIZE 1
-+#define MCI_DTOE_OFFSET 22
-+#define MCI_DTOE_SIZE 1
-+#define MCI_OVRE_OFFSET 30
-+#define MCI_OVRE_SIZE 1
-+#define MCI_UNRE_OFFSET 31
-+#define MCI_UNRE_SIZE 1
++ if (dtomul >= 8) {
++ dtomul = 7;
++ dtocyc = 15;
++ }
+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE 0
-+#define MCI_DTOMUL_16_CYCLES 1
-+#define MCI_DTOMUL_128_CYCLES 2
-+#define MCI_DTOMUL_256_CYCLES 3
-+#define MCI_DTOMUL_1024_CYCLES 4
-+#define MCI_DTOMUL_4096_CYCLES 5
-+#define MCI_DTOMUL_65536_CYCLES 6
-+#define MCI_DTOMUL_1048576_CYCLES 7
++ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
++ dtocyc << dtomul_to_shift[dtomul]);
++ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++ | MCI_BF(DTOCYC, dtocyc)));
++}
+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP 0
-+#define MCI_RSPTYP_48_BIT 1
-+#define MCI_RSPTYP_136_BIT 2
++/*
++ * Return mask with command flags to be enabled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++ struct mmc_command *cmd)
++{
++ u32 cmdr;
+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD 0
-+#define MCI_SPCMD_INIT_CMD 1
-+#define MCI_SPCMD_SYNC_CMD 2
-+#define MCI_SPCMD_INT_CMD 4
-+#define MCI_SPCMD_INT_RESP 5
++ cmd->error = 0;
+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS 0
-+#define MCI_TRCMD_START_TRANS 1
-+#define MCI_TRCMD_STOP_TRANS 2
++ cmdr = MCI_BF(CMDNB, cmd->opcode);
+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK 0
-+#define MCI_TRTYP_MULTI_BLOCK 1
-+#define MCI_TRTYP_STREAM 2
++ if (cmd->flags & MMC_RSP_PRESENT) {
++ if (cmd->flags & MMC_RSP_136)
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++ else
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++ }
+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name) \
-+ (1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value) \
-+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
-+ << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value) \
-+ (((value) >> MCI_##name##_OFFSET) \
-+ & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
-+ << MCI_##name##_OFFSET)) \
-+ | MCI_BF(name,value))
++ /*
++ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++ * it's too difficult to determine whether this is an ACMD or
++ * not. Better make it 64.
++ */
++ cmdr |= MCI_BIT(MAXLAT);
+
-+/* Register access macros */
-+#define mci_readl(port,reg) \
-+ __raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + MCI_##reg)
++ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++ cmdr |= MCI_BIT(OPDCMD);
+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff -x .git -Nur linux-2.6.22.1/drivers/mmc/host/Kconfig linux-avr32.git/drivers/mmc/host/Kconfig
---- linux-2.6.22.1/drivers/mmc/host/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/mmc/host/Kconfig 2007-07-12 14:00:03.000000000 +0200
-@@ -74,6 +74,16 @@
-
- If unsure, say N.
-
-+config MMC_ATMELMCI
-+ tristate "Atmel Multimedia Card Interface support"
-+ depends on AVR32 && MMC
-+ help
-+ This selects the Atmel Multimedia Card Interface. If you have
-+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+ slot, say Y or M here.
++ dev_dbg(&mmc->class_dev,
++ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
+
-+ If unsure, say N.
++ return cmdr;
++}
+
- config MMC_IMX
- tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
-diff -x .git -Nur linux-2.6.22.1/drivers/mmc/host/Makefile linux-avr32.git/drivers/mmc/host/Makefile
---- linux-2.6.22.1/drivers/mmc/host/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/mmc/host/Makefile 2007-07-12 14:00:03.000000000 +0200
-@@ -14,5 +14,6 @@
- obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
- obj-$(CONFIG_MMC_OMAP) += omap.o
- obj-$(CONFIG_MMC_AT91) += at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
-
-diff -x .git -Nur linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c linux-avr32.git/drivers/mtd/chips/cfi_cmdset_0001.c
---- linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/mtd/chips/cfi_cmdset_0001.c 2007-07-12 14:00:03.000000000 +0200
-@@ -50,6 +50,7 @@
- #define I82802AC 0x00ac
- #define MANUFACTURER_ST 0x0020
- #define M50LPW080 0x002F
-+#define AT49BV640D 0x02de
-
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -156,6 +157,47 @@
- }
- #endif
-
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++static void atmci_start_command(struct atmel_mci *host,
++ struct mmc_command *cmd,
++ u32 cmd_flags)
+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+ struct cfi_pri_atmel atmel_pri;
-+ uint32_t features = 0;
++ WARN_ON(host->cmd);
++ host->cmd = cmd;
+
-+ /* Reverse byteswapping */
-+ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++ mci_writel(host, ARGR, cmd->arg);
++ mci_writel(host, CMDR, cmd_flags);
+
-+ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++ if (cmd->data)
++ dma_start_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++}
+
-+ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 cmd_flags;
+
-+ if (atmel_pri.Features & 0x01) /* chip erase supported */
-+ features |= (1<<0);
-+ if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+ features |= (1<<1);
-+ if (atmel_pri.Features & 0x04) /* program suspend supported */
-+ features |= (1<<2);
-+ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+ features |= (1<<9);
-+ if (atmel_pri.Features & 0x20) /* page mode read supported */
-+ features |= (1<<7);
-+ if (atmel_pri.Features & 0x40) /* queued erase supported */
-+ features |= (1<<4);
-+ if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+ features |= (1<<6);
++ WARN_ON(host->data);
++ host->data = data;
+
-+ extp->FeatureSupport = features;
++ atmci_set_timeout(host, data);
++ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++ | MCI_BF(BLKLEN, data->blksz)));
++ host->dma.req.block_size = data->blksz;
++ host->dma.req.nr_blocks = data->blocks;
+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
-+}
++ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++ if (data->flags & MMC_DATA_STREAM)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else if (data->blocks > 1)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ else
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -233,6 +275,7 @@
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff -x .git -Nur linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c linux-avr32.git/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/mtd/chips/cfi_cmdset_0002.c 2007-06-06 11:33:56.000000000 +0200
-@@ -186,6 +186,10 @@
- extp->TopBottom = 2;
- else
- extp->TopBottom = 3;
++ if (data->flags & MMC_DATA_READ) {
++ cmd_flags |= MCI_BIT(TRDIR);
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_FROM_DEVICE);
++ host->dma.req.periph_id = host->dma.rx_periph_id;
++ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++ host->dma.req.data_reg = host->mapbase + MCI_RDR;
++ } else {
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_TO_DEVICE);
++ host->dma.req.periph_id = host->dma.tx_periph_id;
++ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++ host->dma.req.data_reg = host->mapbase + MCI_TDR;
++ }
++ host->dma.req.sg = data->sg;
+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
- }
-
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -218,6 +222,7 @@
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -230,7 +235,6 @@
- #if !FORCE_WORD_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
-- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- { 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff -x .git -Nur linux-2.6.22.1/drivers/net/Kconfig linux-avr32.git/drivers/net/Kconfig
---- linux-2.6.22.1/drivers/net/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/net/Kconfig 2007-07-12 14:00:03.000000000 +0200
-@@ -314,7 +314,7 @@
- config MACB
- tristate "Atmel MACB support"
- depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
-- select MII
-+ select PHYLIB
- help
- The Atmel MACB ethernet interface is found on many AT32 and AT91
- parts. Say Y to include support for the MACB chip.
-diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/macb.c
---- linux-2.6.22.1/drivers/net/macb.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/net/macb.c 2007-07-13 11:24:16.000000000 +0200
-@@ -17,13 +17,14 @@
- #include <linux/init.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
--#include <linux/mii.h>
--#include <linux/mutex.h>
- #include <linux/dma-mapping.h>
--#include <linux/ethtool.h>
- #include <linux/platform_device.h>
-+#include <linux/phy.h>
-
- #include <asm/arch/board.h>
-+#if defined(CONFIG_ARCH_AT91)
-+#include <asm/arch/cpu.h>
-+#endif
-
- #include "macb.h"
-
-@@ -85,172 +86,202 @@
- memcpy(bp->dev->dev_addr, addr, sizeof(addr));
- }
-
--static void macb_enable_mdio(struct macb *bp)
--{
-- unsigned long flags;
-- u32 reg;
--
-- spin_lock_irqsave(&bp->lock, flags);
-- reg = macb_readl(bp, NCR);
-- reg |= MACB_BIT(MPE);
-- macb_writel(bp, NCR, reg);
-- macb_writel(bp, IER, MACB_BIT(MFD));
-- spin_unlock_irqrestore(&bp->lock, flags);
--}
--
--static void macb_disable_mdio(struct macb *bp)
-+static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
- {
-- unsigned long flags;
-- u32 reg;
--
-- spin_lock_irqsave(&bp->lock, flags);
-- reg = macb_readl(bp, NCR);
-- reg &= ~MACB_BIT(MPE);
-- macb_writel(bp, NCR, reg);
-- macb_writel(bp, IDR, MACB_BIT(MFD));
-- spin_unlock_irqrestore(&bp->lock, flags);
--}
--
--static int macb_mdio_read(struct net_device *dev, int phy_id, int location)
--{
-- struct macb *bp = netdev_priv(dev);
-+ struct macb *bp = bus->priv;
- int value;
-
-- mutex_lock(&bp->mdio_mutex);
--
-- macb_enable_mdio(bp);
- macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
- | MACB_BF(RW, MACB_MAN_READ)
-- | MACB_BF(PHYA, phy_id)
-- | MACB_BF(REGA, location)
-+ | MACB_BF(PHYA, mii_id)
-+ | MACB_BF(REGA, regnum)
- | MACB_BF(CODE, MACB_MAN_CODE)));
-
-- wait_for_completion(&bp->mdio_complete);
-+ /* wait for end of transfer */
-+ while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-+ cpu_relax();
-
- value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
-- macb_disable_mdio(bp);
-- mutex_unlock(&bp->mdio_mutex);
-
- return value;
- }
-
--static void macb_mdio_write(struct net_device *dev, int phy_id,
-- int location, int val)
-+static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+ u16 value)
- {
-- struct macb *bp = netdev_priv(dev);
--
-- dev_dbg(&bp->pdev->dev, "mdio_write %02x:%02x <- %04x\n",
-- phy_id, location, val);
--
-- mutex_lock(&bp->mdio_mutex);
-- macb_enable_mdio(bp);
-+ struct macb *bp = bus->priv;
-
- macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
- | MACB_BF(RW, MACB_MAN_WRITE)
-- | MACB_BF(PHYA, phy_id)
-- | MACB_BF(REGA, location)
-+ | MACB_BF(PHYA, mii_id)
-+ | MACB_BF(REGA, regnum)
- | MACB_BF(CODE, MACB_MAN_CODE)
-- | MACB_BF(DATA, val)));
-+ | MACB_BF(DATA, value)));
-
-- wait_for_completion(&bp->mdio_complete);
-+ /* wait for end of transfer */
-+ while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-+ cpu_relax();
-
-- macb_disable_mdio(bp);
-- mutex_unlock(&bp->mdio_mutex);
-+ return 0;
- }
-
--static int macb_phy_probe(struct macb *bp)
-+static int macb_mdio_reset(struct mii_bus *bus)
- {
-- int phy_address;
-- u16 phyid1, phyid2;
-+ return 0;
++ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++
++ return cmd_flags;
+}
-
-- for (phy_address = 0; phy_address < 32; phy_address++) {
-- phyid1 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID1);
-- phyid2 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID2);
-+static void macb_handle_link_change(struct net_device *dev)
++
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
-+ struct macb *bp = netdev_priv(dev);
-+ struct phy_device *phydev = bp->phy_dev;
-+ unsigned long flags;
-
-- if (phyid1 != 0xffff && phyid1 != 0x0000
-- && phyid2 != 0xffff && phyid2 != 0x0000)
-- break;
-+ int status_change = 0;
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_data *data = mrq->data;
++ u32 iflags;
++ u32 cmdflags = 0;
++
++ iflags = mci_readl(host, IMR);
++ if (iflags)
++ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
++ mci_readl(host, IMR));
+
-+ spin_lock_irqsave(&bp->lock, flags);
++ WARN_ON(host->mrq != NULL);
++ host->mrq = mrq;
++ host->pending_events = 0;
++ host->completed_events = 0;
+
-+ if (phydev->link) {
-+ if ((bp->speed != phydev->speed) ||
-+ (bp->duplex != phydev->duplex)) {
-+ u32 reg;
++ iflags = MCI_BIT(CMDRDY);
++ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
++
++ if (mrq->stop) {
++ WARN_ON(!data);
++
++ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
++ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++ if (!(data->flags & MMC_DATA_WRITE))
++ host->stop_cmdr |= MCI_BIT(TRDIR);
++ if (data->flags & MMC_DATA_STREAM)
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ }
++ if (data) {
++ cmdflags |= atmci_prepare_data(mmc, data);
++ iflags |= MCI_DATA_ERROR_FLAGS;
++ }
+
-+ reg = macb_readl(bp, NCFGR);
-+ reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
++ atmci_start_command(host, mrq->cmd, cmdflags);
++ mci_writel(host, IER, iflags);
++}
+
-+ if (phydev->duplex)
-+ reg |= MACB_BIT(FD);
-+ if (phydev->speed)
-+ reg |= MACB_BIT(SPD);
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 mr;
+
-+ macb_writel(bp, NCFGR, reg);
++ if (ios->clock) {
++ u32 clkdiv;
+
-+ bp->speed = phydev->speed;
-+ bp->duplex = phydev->duplex;
-+ status_change = 1;
-+ }
- }
-
-- if (phy_address == 32)
-- return -ENODEV;
-+ if (phydev->link != bp->link) {
-+ if (phydev->link)
-+ netif_schedule(dev);
-+ else {
-+ bp->speed = 0;
-+ bp->duplex = -1;
++ /* Set clock rate */
++ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
++ if (clkdiv > 255) {
++ dev_warn(&mmc->class_dev,
++ "clock %u too slow; using %lu\n",
++ ios->clock, host->bus_hz / (2 * 256));
++ clkdiv = 255;
+ }
-+ bp->link = phydev->link;
-
-- dev_info(&bp->pdev->dev,
-- "detected PHY at address %d (ID %04x:%04x)\n",
-- phy_address, phyid1, phyid2);
-+ status_change = 1;
-+ }
-
-- bp->mii.phy_id = phy_address;
-- return 0;
-+ spin_unlock_irqrestore(&bp->lock, flags);
+
-+ if (status_change) {
-+ if (phydev->link)
-+ printk(KERN_INFO "%s: link up (%d/%s)\n",
-+ dev->name, phydev->speed,
-+ DUPLEX_FULL == phydev->duplex ? "Full":"Half");
-+ else
-+ printk(KERN_INFO "%s: link down\n", dev->name);
++ mr = mci_readl(host, MR);
++ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
++ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
++ mci_writel(host, MR, mr);
++
++ /* Enable the MCI controller */
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ } else {
++ /* Disable the MCI controller */
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
+ }
- }
-
--static void macb_set_media(struct macb *bp, int media)
-+/* based on au1000_eth. c*/
-+static int macb_mii_probe(struct net_device *dev)
- {
-- u32 reg;
-+ struct macb *bp = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ struct eth_platform_data *pdata;
-+ int phy_addr;
-
-- spin_lock_irq(&bp->lock);
-- reg = macb_readl(bp, NCFGR);
-- reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
-- if (media & (ADVERTISE_100HALF | ADVERTISE_100FULL))
-- reg |= MACB_BIT(SPD);
-- if (media & ADVERTISE_FULL)
-- reg |= MACB_BIT(FD);
-- macb_writel(bp, NCFGR, reg);
-- spin_unlock_irq(&bp->lock);
-+ /* find the first phy */
-+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-+ if (bp->mii_bus.phy_map[phy_addr]) {
-+ phydev = bp->mii_bus.phy_map[phy_addr];
-+ break;
-+ }
++
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_1:
++ mci_writel(host, SDCR, 0);
++ break;
++ case MMC_BUS_WIDTH_4:
++ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++ break;
+ }
+
-+ if (!phydev) {
-+ printk (KERN_ERR "%s: no PHY found\n", dev->name);
-+ return -1;
++ switch (ios->power_mode) {
++ case MMC_POWER_ON:
++ /* Send init sequence (74 clock cycles) */
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
++ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
++ cpu_relax();
++ break;
++ default:
++ /*
++ * TODO: None of the currently available AVR32-based
++ * boards allow MMC power to be turned off. Implement
++ * power control when this can be tested properly.
++ */
++ break;
+ }
++}
+
-+ pdata = bp->pdev->dev.platform_data;
-+ /* TODO : add pin_irq */
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++ int read_only = 0;
++ struct atmel_mci *host = mmc_priv(mmc);
+
-+ /* attach the mac to the phy */
-+ if (pdata && pdata->is_rmii) {
-+ phydev = phy_connect(dev, phydev->dev.bus_id,
-+ &macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
++ if (host->wp_pin >= 0) {
++ read_only = gpio_get_value(host->wp_pin);
++ dev_dbg(&mmc->class_dev, "card is %s\n",
++ read_only ? "read-only" : "read-write");
+ } else {
-+ phydev = phy_connect(dev, phydev->dev.bus_id,
-+ &macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
++ dev_dbg(&mmc->class_dev,
++ "no pin for checking read-only switch."
++ " Assuming write-enable.\n");
+ }
+
-+ if (IS_ERR(phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(phydev);
-+ }
++ return read_only;
++}
+
-+ /* mask with MAC supported features */
-+ phydev->supported &= PHY_BASIC_FEATURES;
++static struct mmc_host_ops atmci_ops = {
++ .request = atmci_request,
++ .set_ios = atmci_set_ios,
++ .get_ro = atmci_get_ro,
++};
+
-+ phydev->advertising = phydev->supported;
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
+
-+ bp->link = 0;
-+ bp->speed = 0;
-+ bp->duplex = -1;
-+ bp->phy_dev = phydev;
++ WARN_ON(host->cmd || host->data);
++ host->mrq = NULL;
+
-+ return 0;
- }
-
--static void macb_check_media(struct macb *bp, int ok_to_print, int init_media)
-+static int macb_mii_init(struct macb *bp)
- {
-- struct mii_if_info *mii = &bp->mii;
-- unsigned int old_carrier, new_carrier;
-- int advertise, lpa, media, duplex;
-+ struct eth_platform_data *pdata;
-+ int err = -ENXIO, i;
-
-- /* if forced media, go no further */
-- if (mii->force_media)
-- return;
-+ /* Enable managment port */
-+ macb_writel(bp, NCR, MACB_BIT(MPE));
-
-- /* check current and old link status */
-- old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
-- new_carrier = (unsigned int) mii_link_ok(mii);
-+ bp->mii_bus.name = "MACB_mii_bus",
-+ bp->mii_bus.read = &macb_mdio_read,
-+ bp->mii_bus.write = &macb_mdio_write,
-+ bp->mii_bus.reset = &macb_mdio_reset,
-+ bp->mii_bus.id = bp->pdev->id,
-+ bp->mii_bus.priv = bp,
-+ bp->mii_bus.dev = &bp->dev->dev;
-+ pdata = bp->pdev->dev.platform_data;
-
-- /* if carrier state did not change, assume nothing else did */
-- if (!init_media && old_carrier == new_carrier)
-- return;
-+ if (pdata)
-+ bp->mii_bus.phy_mask = pdata->phy_mask;
-
-- /* no carrier, nothing much to do */
-- if (!new_carrier) {
-- netif_carrier_off(mii->dev);
-- printk(KERN_INFO "%s: link down\n", mii->dev->name);
-- return;
-+ bp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-+ if (!bp->mii_bus.irq) {
-+ err = -ENOMEM;
-+ goto err_out;
- }
-
-- /*
-- * we have carrier, see who's on the other end
-- */
-- netif_carrier_on(mii->dev);
-+ for (i = 0; i < PHY_MAX_ADDR; i++)
-+ bp->mii_bus.irq[i] = PHY_POLL;
-
-- /* get MII advertise and LPA values */
-- if (!init_media && mii->advertising) {
-- advertise = mii->advertising;
-- } else {
-- advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
-- mii->advertising = advertise;
-- }
-- lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
-+ platform_set_drvdata(bp->dev, &bp->mii_bus);
-
-- /* figure out media and duplex from advertise and LPA values */
-- media = mii_nway_result(lpa & advertise);
-- duplex = (media & ADVERTISE_FULL) ? 1 : 0;
-+ if (mdiobus_register(&bp->mii_bus))
-+ goto err_out_free_mdio_irq;
-
-- if (ok_to_print)
-- printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n",
-- mii->dev->name,
-- media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? "100" : "10",
-- duplex ? "full" : "half", lpa);
-+ if (macb_mii_probe(bp->dev) != 0) {
-+ goto err_out_unregister_bus;
-+ }
-
-- mii->full_duplex = duplex;
-+ return 0;
-
-- /* Let the MAC know about the new link state */
-- macb_set_media(bp, media);
-+err_out_unregister_bus:
-+ mdiobus_unregister(&bp->mii_bus);
-+err_out_free_mdio_irq:
-+ kfree(bp->mii_bus.irq);
-+err_out:
-+ return err;
- }
-
- static void macb_update_stats(struct macb *bp)
-@@ -265,16 +296,6 @@
- *p += __raw_readl(reg);
- }
-
--static void macb_periodic_task(struct work_struct *work)
--{
-- struct macb *bp = container_of(work, struct macb, periodic_task.work);
--
-- macb_update_stats(bp);
-- macb_check_media(bp, 1, 0);
--
-- schedule_delayed_work(&bp->periodic_task, HZ);
--}
--
- static void macb_tx(struct macb *bp)
- {
- unsigned int tail;
-@@ -519,9 +540,6 @@
- spin_lock(&bp->lock);
-
- while (status) {
-- if (status & MACB_BIT(MFD))
-- complete(&bp->mdio_complete);
--
- /* close possible race with dev_close */
- if (unlikely(!netif_running(dev))) {
- macb_writel(bp, IDR, ~0UL);
-@@ -535,7 +553,8 @@
- * until we have processed the buffers
- */
- macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
-- dev_dbg(&bp->pdev->dev, "scheduling RX softirq\n");
-+ dev_dbg(&bp->pdev->dev,
-+ "scheduling RX softirq\n");
- __netif_rx_schedule(dev);
- }
- }
-@@ -765,7 +784,7 @@
- macb_writel(bp, TBQP, bp->tx_ring_dma);
-
- /* Enable TX and RX */
-- macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE));
-+ macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
-
- /* Enable interrupts */
- macb_writel(bp, IER, (MACB_BIT(RCOMP)
-@@ -776,18 +795,126 @@
- | MACB_BIT(TCOMP)
- | MACB_BIT(ISR_ROVR)
- | MACB_BIT(HRESP)));
++ mmc_request_done(mmc, mrq);
++}
++
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++ u32 flags)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
+
++ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++ mci_writel(host, IER, MCI_BIT(CMDRDY));
+}
+
-+/*
-+ * The hash address register is 64 bits long and takes up two
-+ * locations in the memory map. The least significant bits are stored
-+ * in EMAC_HSL and the most significant bits in EMAC_HSH.
-+ *
-+ * The unicast hash enable and the multicast hash enable bits in the
-+ * network configuration register enable the reception of hash matched
-+ * frames. The destination address is reduced to a 6 bit index into
-+ * the 64 bit hash register using the following hash function. The
-+ * hash function is an exclusive or of every sixth bit of the
-+ * destination address.
-+ *
-+ * hi[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
-+ * hi[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
-+ * hi[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
-+ * hi[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
-+ * hi[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
-+ * hi[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
-+ *
-+ * da[0] represents the least significant bit of the first byte
-+ * received, that is, the multicast/unicast indicator, and da[47]
-+ * represents the most significant bit of the last byte received. If
-+ * the hash index, hi[n], points to a bit that is set in the hash
-+ * register then the frame will be matched according to whether the
-+ * frame is multicast or unicast. A multicast match will be signalled
-+ * if the multicast hash enable bit is set, da[0] is 1 and the hash
-+ * index points to a bit set in the hash register. A unicast match
-+ * will be signalled if the unicast hash enable bit is set, da[0] is 0
-+ * and the hash index points to a bit set in the hash register. To
-+ * receive all multicast frames, the hash register should be set with
-+ * all ones and the multicast hash enable bit should be set in the
-+ * network configuration register.
-+ */
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++{
++ host->data = NULL;
++ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++ ((data->flags & MMC_DATA_WRITE)
++ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++
++ /*
++ * Data might complete before command for very short transfers
++ * (like READ_SCR)
++ */
++ if (mci_cmd_is_complete(host)
++ && (!data->stop || mci_stop_is_complete(host)))
++ atmci_request_end(host->mmc, data->mrq);
++}
+
-+static inline int hash_bit_value(int bitnr, __u8 *addr)
++static void atmci_command_complete(struct atmel_mci *host,
++ struct mmc_command *cmd, u32 status)
+{
-+ if (addr[bitnr / 8] & (1 << (bitnr % 8)))
-+ return 1;
-+ return 0;
++ if (status & MCI_BIT(RTOE))
++ cmd->error = -ETIMEDOUT;
++ else if ((cmd->flags & MMC_RSP_CRC)
++ && (status & MCI_BIT(RCRCE)))
++ cmd->error = -EILSEQ;
++ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
++ cmd->error = -EIO;
++
++ if (cmd->error) {
++ dev_dbg(&host->mmc->class_dev,
++ "command error: op=0x%x status=0x%08x\n",
++ cmd->opcode, status);
++
++ if (cmd->data) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS);
++ host->data = NULL;
++ }
++ }
+}
+
-+/*
-+ * Return the hash index value for the specified address.
-+ */
-+static int hash_get_index(__u8 *addr)
++static void atmci_tasklet_func(unsigned long priv)
+{
-+ int i, j, bitval;
-+ int hash_index = 0;
++ struct mmc_host *mmc = (struct mmc_host *)priv;
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_request *mrq = host->mrq;
++ struct mmc_data *data = host->data;
+
-+ for (j = 0; j < 6; j++) {
-+ for (i = 0, bitval = 0; i < 8; i++)
-+ bitval ^= hash_bit_value(i*6 + j, addr);
++ dev_vdbg(&mmc->class_dev,
++ "tasklet: pending/completed/mask %lx/%lx/%x\n",
++ host->pending_events, host->completed_events,
++ mci_readl(host, IMR));
+
-+ hash_index |= (bitval << j);
++ if (mci_clear_cmd_is_pending(host)) {
++ mci_set_cmd_complete(host);
++ atmci_command_complete(host, mrq->cmd, host->cmd_status);
++ if (!host->data || mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
+ }
++ if (mci_clear_stop_is_pending(host)) {
++ mci_set_stop_complete(host);
++ atmci_command_complete(host, mrq->stop, host->stop_status);
++ if (mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_dma_error_is_pending(host)) {
++ mci_set_dma_error_complete(host);
++ mci_clear_data_pending(host);
+
-+ return hash_index;
- }
-
--static void macb_init_phy(struct net_device *dev)
-+/*
-+ * Add multicast addresses to the internal multicast-hash table.
-+ */
-+static void macb_sethashtable(struct net_device *dev)
- {
-+ struct dev_mc_list *curr;
-+ unsigned long mc_filter[2];
-+ unsigned int i, bitnr;
- struct macb *bp = netdev_priv(dev);
-
-- /* Set some reasonable default settings */
-- macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE,
-- ADVERTISE_CSMA | ADVERTISE_ALL);
-- macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR,
-- (BMCR_SPEED100 | BMCR_ANENABLE
-- | BMCR_ANRESTART | BMCR_FULLDPLX));
-+ mc_filter[0] = mc_filter[1] = 0;
++ /* DMA controller got bus error => invalid address */
++ data->error = -EIO;
+
-+ curr = dev->mc_list;
-+ for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
-+ if (!curr) break; /* unexpected end of list */
++ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
++ host->data->bytes_xfered);
+
-+ bitnr = hash_get_index(curr->dmi_addr);
-+ mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
+ }
++ if (mci_clear_data_error_is_pending(host)) {
++ u32 status = host->data_status;
+
-+ macb_writel(bp, HRB, mc_filter[0]);
-+ macb_writel(bp, HRT, mc_filter[1]);
-+}
++ mci_set_data_error_complete(host);
++ mci_clear_data_pending(host);
+
-+/*
-+ * Enable/Disable promiscuous and multicast modes.
-+ */
-+static void macb_set_rx_mode(struct net_device *dev)
-+{
-+ unsigned long cfg;
-+ struct macb *bp = netdev_priv(dev);
-+
-+ cfg = macb_readl(bp, NCFGR);
-+
-+ if (dev->flags & IFF_PROMISC)
-+ /* Enable promiscuous mode */
-+ cfg |= MACB_BIT(CAF);
-+ else if (dev->flags & (~IFF_PROMISC))
-+ /* Disable promiscuous mode */
-+ cfg &= ~MACB_BIT(CAF);
-+
-+ if (dev->flags & IFF_ALLMULTI) {
-+ /* Enable all multicast mode */
-+ macb_writel(bp, HRB, -1);
-+ macb_writel(bp, HRT, -1);
-+ cfg |= MACB_BIT(NCFGR_MTI);
-+ } else if (dev->mc_count > 0) {
-+ /* Enable specific multicasts */
-+ macb_sethashtable(dev);
-+ cfg |= MACB_BIT(NCFGR_MTI);
-+ } else if (dev->flags & (~IFF_ALLMULTI)) {
-+ /* Disable all multicast mode */
-+ macb_writel(bp, HRB, 0);
-+ macb_writel(bp, HRT, 0);
-+ cfg &= ~MACB_BIT(NCFGR_MTI);
-+ }
-+
-+ macb_writel(bp, NCFGR, cfg);
- }
-
- static int macb_open(struct net_device *dev)
-@@ -797,6 +924,10 @@
-
- dev_dbg(&bp->pdev->dev, "open\n");
-
-+ /* if the phy is not yet register, retry later*/
-+ if (!bp->phy_dev)
-+ return -EAGAIN;
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
+
- if (!is_valid_ether_addr(dev->dev_addr))
- return -EADDRNOTAVAIL;
-
-@@ -810,12 +941,11 @@
-
- macb_init_rings(bp);
- macb_init_hw(bp);
-- macb_init_phy(dev);
-
-- macb_check_media(bp, 1, 1);
-- netif_start_queue(dev);
-+ /* schedule a link state check */
-+ phy_start(bp->phy_dev);
-
-- schedule_delayed_work(&bp->periodic_task, HZ);
-+ netif_start_queue(dev);
-
- return 0;
- }
-@@ -825,10 +955,11 @@
- struct macb *bp = netdev_priv(dev);
- unsigned long flags;
-
-- cancel_rearming_delayed_work(&bp->periodic_task);
--
- netif_stop_queue(dev);
-
-+ if (bp->phy_dev)
-+ phy_stop(bp->phy_dev);
++ if (status & MCI_BIT(DCRCE)) {
++ dev_dbg(&mmc->class_dev, "data CRC error\n");
++ data->error = -EILSEQ;
++ } else if (status & MCI_BIT(DTOE)) {
++ dev_dbg(&mmc->class_dev, "data timeout error\n");
++ data->error = -ETIMEDOUT;
++ } else {
++ dev_dbg(&mmc->class_dev, "data FIFO error\n");
++ data->error = -EIO;
++ }
++ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
++ data->bytes_xfered);
+
- spin_lock_irqsave(&bp->lock, flags);
- macb_reset_hw(bp);
- netif_carrier_off(dev);
-@@ -845,6 +976,9 @@
- struct net_device_stats *nstat = &bp->stats;
- struct macb_stats *hwstat = &bp->hw_stats;
-
-+ /* read stats from hardware */
-+ macb_update_stats(bp);
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
+
- /* Convert HW stats into netdevice stats */
- nstat->rx_errors = (hwstat->rx_fcs_errors +
- hwstat->rx_align_errors +
-@@ -882,18 +1016,27 @@
- static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct macb *bp = netdev_priv(dev);
-+ struct phy_device *phydev = bp->phy_dev;
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_is_pending(host)) {
++ mci_set_data_complete(host);
++ data->bytes_xfered = data->blocks * data->blksz;
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_card_detect_is_pending(host)) {
++ /* Reset controller if card is gone */
++ if (!host->present) {
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ }
+
-+ if (!phydev)
-+ return -ENODEV;
-
-- return mii_ethtool_gset(&bp->mii, cmd);
-+ return phy_ethtool_gset(phydev, cmd);
- }
-
- static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct macb *bp = netdev_priv(dev);
-+ struct phy_device *phydev = bp->phy_dev;
++ /* Clean up queue if present */
++ if (mrq) {
++ if (!mci_cmd_is_complete(host))
++ mrq->cmd->error = -ETIMEDOUT;
++ if (mrq->data && !mci_data_is_complete(host)
++ && !mci_data_error_is_complete(host)) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data->error = -ETIMEDOUT;
++ atmci_data_complete(host, data);
++ }
++ if (mrq->stop && !mci_stop_is_complete(host))
++ mrq->stop->error = -ETIMEDOUT;
+
-+ if (!phydev)
-+ return -ENODEV;
-
-- return mii_ethtool_sset(&bp->mii, cmd);
-+ return phy_ethtool_sset(phydev, cmd);
- }
-
--static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-+static void macb_get_drvinfo(struct net_device *dev,
-+ struct ethtool_drvinfo *info)
- {
- struct macb *bp = netdev_priv(dev);
-
-@@ -902,104 +1045,34 @@
- strcpy(info->bus_info, bp->pdev->dev.bus_id);
- }
-
--static int macb_nway_reset(struct net_device *dev)
--{
-- struct macb *bp = netdev_priv(dev);
-- return mii_nway_restart(&bp->mii);
--}
--
- static struct ethtool_ops macb_ethtool_ops = {
- .get_settings = macb_get_settings,
- .set_settings = macb_set_settings,
- .get_drvinfo = macb_get_drvinfo,
-- .nway_reset = macb_nway_reset,
- .get_link = ethtool_op_get_link,
- };
-
- static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- struct macb *bp = netdev_priv(dev);
-+ struct phy_device *phydev = bp->phy_dev;
-
- if (!netif_running(dev))
- return -EINVAL;
-
-- return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
--}
--
--static ssize_t macb_mii_show(const struct device *_dev, char *buf,
-- unsigned long addr)
--{
-- struct net_device *dev = to_net_dev(_dev);
-- struct macb *bp = netdev_priv(dev);
-- ssize_t ret = -EINVAL;
--
-- if (netif_running(dev)) {
-- int value;
-- value = macb_mdio_read(dev, bp->mii.phy_id, addr);
-- ret = sprintf(buf, "0x%04x\n", (uint16_t)value);
-- }
--
-- return ret;
--}
--
--#define MII_ENTRY(name, addr) \
--static ssize_t show_##name(struct device *_dev, \
-- struct device_attribute *attr, \
-- char *buf) \
--{ \
-- return macb_mii_show(_dev, buf, addr); \
--} \
--static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
--
--MII_ENTRY(bmcr, MII_BMCR);
--MII_ENTRY(bmsr, MII_BMSR);
--MII_ENTRY(physid1, MII_PHYSID1);
--MII_ENTRY(physid2, MII_PHYSID2);
--MII_ENTRY(advertise, MII_ADVERTISE);
--MII_ENTRY(lpa, MII_LPA);
--MII_ENTRY(expansion, MII_EXPANSION);
--
--static struct attribute *macb_mii_attrs[] = {
-- &dev_attr_bmcr.attr,
-- &dev_attr_bmsr.attr,
-- &dev_attr_physid1.attr,
-- &dev_attr_physid2.attr,
-- &dev_attr_advertise.attr,
-- &dev_attr_lpa.attr,
-- &dev_attr_expansion.attr,
-- NULL,
--};
--
--static struct attribute_group macb_mii_group = {
-- .name = "mii",
-- .attrs = macb_mii_attrs,
--};
--
--static void macb_unregister_sysfs(struct net_device *net)
--{
-- struct device *_dev = &net->dev;
-+ if (!phydev)
-+ return -ENODEV;
-
-- sysfs_remove_group(&_dev->kobj, &macb_mii_group);
-+ return phy_mii_ioctl(phydev, if_mii(rq), cmd);
- }
-
--static int macb_register_sysfs(struct net_device *net)
--{
-- struct device *_dev = &net->dev;
-- int ret;
--
-- ret = sysfs_create_group(&_dev->kobj, &macb_mii_group);
-- if (ret)
-- printk(KERN_WARNING
-- "%s: sysfs mii attribute registration failed: %d\n",
-- net->name, ret);
-- return ret;
--}
- static int __devinit macb_probe(struct platform_device *pdev)
- {
- struct eth_platform_data *pdata;
- struct resource *regs;
- struct net_device *dev;
- struct macb *bp;
-+ struct phy_device *phydev;
- unsigned long pclk_hz;
- u32 config;
- int err = -ENXIO;
-@@ -1073,6 +1146,7 @@
- dev->stop = macb_close;
- dev->hard_start_xmit = macb_start_xmit;
- dev->get_stats = macb_get_stats;
-+ dev->set_multicast_list = macb_set_rx_mode;
- dev->do_ioctl = macb_ioctl;
- dev->poll = macb_poll;
- dev->weight = 64;
-@@ -1080,10 +1154,6 @@
-
- dev->base_addr = regs->start;
-
-- INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task);
-- mutex_init(&bp->mdio_mutex);
-- init_completion(&bp->mdio_complete);
--
- /* Set MII management clock divider */
- pclk_hz = clk_get_rate(bp->pclk);
- if (pclk_hz <= 20000000)
-@@ -1096,20 +1166,9 @@
- config = MACB_BF(CLK, MACB_CLK_DIV64);
- macb_writel(bp, NCFGR, config);
-
-- bp->mii.dev = dev;
-- bp->mii.mdio_read = macb_mdio_read;
-- bp->mii.mdio_write = macb_mdio_write;
-- bp->mii.phy_id_mask = 0x1f;
-- bp->mii.reg_num_mask = 0x1f;
--
- macb_get_hwaddr(bp);
-- err = macb_phy_probe(bp);
-- if (err) {
-- dev_err(&pdev->dev, "Failed to detect PHY, aborting.\n");
-- goto err_out_free_irq;
-- }
--
- pdata = pdev->dev.platform_data;
++ host->cmd = NULL;
++ atmci_request_end(mmc, mrq);
++ }
++ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
++ }
++}
++
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_command *cmd = host->cmd;
++
++ /*
++ * Read the response now so that we're free to send a new
++ * command immediately.
++ */
++ cmd->resp[0] = mci_readl(host, RSPR);
++ cmd->resp[1] = mci_readl(host, RSPR);
++ cmd->resp[2] = mci_readl(host, RSPR);
++ cmd->resp[3] = mci_readl(host, RSPR);
+
- if (pdata && pdata->is_rmii)
- #if defined(CONFIG_ARCH_AT91)
- macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
-@@ -1131,9 +1190,11 @@
- goto err_out_free_irq;
- }
-
-- platform_set_drvdata(pdev, dev);
-+ if (macb_mii_init(bp) != 0) {
-+ goto err_out_unregister_netdev;
++ mci_writel(host, IDR, MCI_BIT(CMDRDY));
++ host->cmd = NULL;
++
++ if (mci_stop_sent_is_complete(host)) {
++ host->stop_status = status;
++ mci_set_stop_pending(host);
++ } else {
++ if (host->mrq->stop && mci_dma_is_complete(host)
++ && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, host->data, 0);
++ host->cmd_status = status;
++ mci_set_cmd_pending(host);
+ }
-
-- macb_register_sysfs(dev);
-+ platform_set_drvdata(pdev, dev);
-
- printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d "
- "(%02x:%02x:%02x:%02x:%02x:%02x)\n",
-@@ -1141,8 +1202,15 @@
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
-
-+ phydev = bp->phy_dev;
-+ printk(KERN_INFO "%s: attached PHY driver [%s] "
-+ "(mii_bus:phy_addr=%s, irq=%d)\n",
-+ dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+
- return 0;
-
-+err_out_unregister_netdev:
-+ unregister_netdev(dev);
- err_out_free_irq:
- free_irq(dev->irq, dev);
- err_out_iounmap:
-@@ -1153,7 +1221,9 @@
- clk_put(bp->hclk);
- #endif
- clk_disable(bp->pclk);
-+#ifndef CONFIG_ARCH_AT91
- err_out_put_pclk:
-+#endif
- clk_put(bp->pclk);
- err_out_free_dev:
- free_netdev(dev);
-@@ -1171,7 +1241,8 @@
-
- if (dev) {
- bp = netdev_priv(dev);
-- macb_unregister_sysfs(dev);
-+ mdiobus_unregister(&bp->mii_bus);
-+ kfree(bp->mii_bus.irq);
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- iounmap(bp->regs);
-diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.h linux-avr32.git/drivers/net/macb.h
---- linux-2.6.22.1/drivers/net/macb.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/net/macb.h 2007-07-12 14:00:04.000000000 +0200
-@@ -383,11 +383,11 @@
-
- unsigned int rx_pending, tx_pending;
-
-- struct delayed_work periodic_task;
--
-- struct mutex mdio_mutex;
-- struct completion mdio_complete;
-- struct mii_if_info mii;
-+ struct mii_bus mii_bus;
-+ struct phy_device *phy_dev;
-+ unsigned int link;
-+ unsigned int speed;
-+ unsigned int duplex;
- };
-
- #endif /* _MACB_H */
-diff -x .git -Nur linux-2.6.22.1/drivers/rtc/Kconfig linux-avr32.git/drivers/rtc/Kconfig
---- linux-2.6.22.1/drivers/rtc/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/rtc/Kconfig 2007-07-12 14:00:13.000000000 +0200
-@@ -379,6 +379,13 @@
- To compile this driver as a module, choose M here: the
- module will be called rtc-pl031.
-
-+config RTC_DRV_AT32AP700X
-+ tristate "AT32AP700X series RTC"
-+ depends on RTC_CLASS && PLATFORM_AT32AP
-+ help
-+ Driver for the internal RTC (Realtime Clock) on Atmel AVR32
-+ AT32AP700x family processors.
-+
- config RTC_DRV_AT91RM9200
- tristate "AT91RM9200"
- depends on RTC_CLASS && ARCH_AT91RM9200
-diff -x .git -Nur linux-2.6.22.1/drivers/rtc/Makefile linux-avr32.git/drivers/rtc/Makefile
---- linux-2.6.22.1/drivers/rtc/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/rtc/Makefile 2007-07-12 14:00:13.000000000 +0200
-@@ -19,6 +19,7 @@
- obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
- obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
- obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
-+obj-$(CONFIG_RTC_DRV_AT32AP700X) += rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
- obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
- obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
-diff -x .git -Nur linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c linux-avr32.git/drivers/rtc/rtc-at32ap700x.c
---- linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/rtc/rtc-at32ap700x.c 2007-07-12 14:00:13.000000000 +0200
-@@ -0,0 +1,337 @@
-+/*
-+ * An RTC driver for the AVR32 AT32AP700x processor series.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
++ tasklet_schedule(&host->tasklet);
++}
+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+#include <linux/io.h>
++static void atmci_xfer_complete(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++ struct mmc_data *data;
+
-+/*
-+ * This is a bare-bones RTC. It runs during most system sleep states, but has
-+ * no battery backup and gets reset during system restart. It must be
-+ * initialized from an external clock (network, I2C, etc) before it can be of
-+ * much use.
-+ *
-+ * The alarm functionality is limited by the hardware, not supporting
-+ * periodic interrupts.
-+ */
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++ data = host->data;
++
++ /*
++ * This callback may be called before we see the CMDRDY
++ * interrupt under heavy irq load (possibly caused by other
++ * drivers) or when interrupts are disabled for a long time.
++ */
++ mci_set_dma_complete(host);
++ if (data->stop && mci_cmd_is_complete(host)
++ && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, data, 0);
++
++ /*
++ * Regardless of what the documentation says, we have to wait
++ * for NOTBUSY even after block read operations.
++ *
++ * When the DMA transfer is complete, the controller may still
++ * be reading the CRC from the card, i.e. the data transfer is
++ * still in progress and we haven't seen all the potential
++ * error bits yet.
++ */
++ mci_writel(host, IER, MCI_BIT(NOTBUSY));
++}
+
-+#define RTC_CTRL 0x00
-+#define RTC_CTRL_EN 0
-+#define RTC_CTRL_PCLR 1
-+#define RTC_CTRL_TOPEN 2
-+#define RTC_CTRL_PSEL 8
++static void atmci_dma_error(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
+
-+#define RTC_VAL 0x04
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
+
-+#define RTC_TOP 0x08
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
+
-+#define RTC_IER 0x10
-+#define RTC_IER_TOPI 0
++ mci_set_dma_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++}
+
-+#define RTC_IDR 0x14
-+#define RTC_IDR_TOPI 0
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 status, mask, pending;
+
-+#define RTC_IMR 0x18
-+#define RTC_IMR_TOPI 0
++ spin_lock(&mmc->lock);
+
-+#define RTC_ISR 0x1c
-+#define RTC_ISR_TOPI 0
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
+
-+#define RTC_ICR 0x20
-+#define RTC_ICR_TOPI 0
++ do {
++ if (pending & MCI_DATA_ERROR_FLAGS) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ host->data_status = status;
++ mci_set_data_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++ break;
++ }
++ if (pending & MCI_BIT(CMDRDY))
++ atmci_cmd_interrupt(mmc, status);
++ if (pending & MCI_BIT(NOTBUSY)) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ mci_set_data_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
+
-+#define RTC_BIT(name) (1 << RTC_##name)
-+#define RTC_BF(name, value) ((value) << RTC_##name)
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++ } while (pending);
+
-+#define rtc_readl(dev, reg) \
-+ __raw_readl((dev)->regs + RTC_##reg)
-+#define rtc_writel(dev, reg, value) \
-+ __raw_writel((value), (dev)->regs + RTC_##reg)
++ spin_unlock(&mmc->lock);
+
-+struct rtc_at32ap700x {
-+ struct rtc_device *rtc;
-+ void __iomem *regs;
-+ unsigned long alarm_time;
-+ unsigned long irq;
-+ /* Protect against concurrent register access. */
-+ spinlock_t lock;
-+};
++ return IRQ_HANDLED;
++}
+
-+static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
++static irqreturn_t atmci_detect_change(int irq, void *dev_id)
+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ unsigned long now;
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
+
-+ now = rtc_readl(rtc, VAL);
-+ rtc_time_to_tm(now, tm);
++ int present = !gpio_get_value(irq_to_gpio(irq));
+
-+ return 0;
++ if (present != host->present) {
++ dev_dbg(&mmc->class_dev, "card %s\n",
++ present ? "inserted" : "removed");
++ host->present = present;
++ mci_set_card_detect_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++ return IRQ_HANDLED;
+}
+
-+static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
++static int __devinit atmci_probe(struct platform_device *pdev)
+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ unsigned long now;
++ struct mci_platform_data *board;
++ struct atmel_mci *host;
++ struct mmc_host *mmc;
++ struct resource *regs;
++ int irq;
+ int ret;
+
-+ ret = rtc_tm_to_time(tm, &now);
-+ if (ret == 0)
-+ rtc_writel(rtc, VAL, now);
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
+
-+ return ret;
-+}
++ board = pdev->dev.platform_data;
+
-+static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++ if (!mmc)
++ return -ENOMEM;
+
-+ rtc_time_to_tm(rtc->alarm_time, &alrm->time);
-+ alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
++ host = mmc_priv(mmc);
++ host->pdev = pdev;
++ host->mmc = mmc;
++ if (board) {
++ host->detect_pin = board->detect_pin;
++ host->wp_pin = board->wp_pin;
++ } else {
++ host->detect_pin = -1;
++ host->detect_pin = -1;
++ }
+
-+ return 0;
-+}
++ host->mck = clk_get(&pdev->dev, "mci_clk");
++ if (IS_ERR(host->mck)) {
++ ret = PTR_ERR(host->mck);
++ goto out_free_host;
++ }
++ clk_enable(host->mck);
+
-+static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ unsigned long rtc_unix_time;
-+ unsigned long alarm_unix_time;
-+ int ret;
++ ret = -ENOMEM;
++ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!host->regs)
++ goto out_disable_clk;
++
++ host->bus_hz = clk_get_rate(host->mck);
++ host->mapbase = regs->start;
+
-+ rtc_unix_time = rtc_readl(rtc, VAL);
++ mmc->ops = &atmci_ops;
++ mmc->f_min = (host->bus_hz + 511) / 512;
++ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++
++ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
++ if (ret)
++ goto out_unmap;
++
++ /* Assume card is present if we don't have a detect pin */
++ host->present = 1;
++ if (host->detect_pin >= 0) {
++ if (gpio_request(host->detect_pin, "mmc_detect")) {
++ dev_dbg(&mmc->class_dev, "no detect pin available\n");
++ host->detect_pin = -1;
++ } else {
++ host->present = !gpio_get_value(host->detect_pin);
++ }
++ }
++ if (host->wp_pin >= 0) {
++ if (gpio_request(host->wp_pin, "mmc_wp")) {
++ dev_dbg(&mmc->class_dev, "no WP pin available\n");
++ host->wp_pin = -1;
++ }
++ }
+
-+ /* RTC does only support one alarm time, not periodic */
-+ if (alrm->time.tm_mday <= 0) {
-+ struct rtc_time tm;
-+ unsigned long then;
++ /* TODO: Get this information from platform data */
++ ret = -ENOMEM;
++ host->dma.req.req.dmac = find_dma_controller(0);
++ if (!host->dma.req.req.dmac) {
++ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
++ goto out_free_irq;
++ }
++ ret = dma_alloc_channel(host->dma.req.req.dmac);
++ if (ret < 0) {
++ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
++ goto out_free_irq;
++ }
++ host->dma.req.req.channel = ret;
++ host->dma.req.width = DMA_WIDTH_32BIT;
++ host->dma.req.req.xfer_complete = atmci_xfer_complete;
++ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++ host->dma.req.req.error = atmci_dma_error;
++ host->dma.rx_periph_id = 0;
++ host->dma.tx_periph_id = 1;
+
-+ rtc_time_to_tm(rtc_unix_time, &tm);
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
+
-+ alrm->time.tm_mday = tm.tm_mday;
-+ alrm->time.tm_mon = tm.tm_mon;
-+ alrm->time.tm_year = tm.tm_year;
++ platform_set_drvdata(pdev, host);
+
-+ rtc_tm_to_time(&alrm->time, &then);
++ mmc_add_host(mmc);
+
-+ /* check if the alarm wraps into tomorrow */
-+ if (then < rtc_unix_time) {
-+ rtc_time_to_tm(rtc_unix_time + 24 * 60 * 60, &tm);
-+ alrm->time.tm_mday = tm.tm_mday;
-+ alrm->time.tm_mon = tm.tm_mon;
-+ alrm->time.tm_year = tm.tm_year;
++ if (host->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(host->detect_pin),
++ atmci_detect_change,
++ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++ DRIVER_NAME, mmc);
++ if (ret) {
++ dev_dbg(&mmc->class_dev,
++ "could not request IRQ %d for detect pin\n",
++ gpio_to_irq(host->detect_pin));
++ gpio_free(host->detect_pin);
++ host->detect_pin = -1;
+ }
+ }
+
-+ ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
-+ if (ret)
-+ return ret;
++ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
++ host->mapbase, irq);
+
-+ if (alarm_unix_time < rtc_unix_time)
-+ return -EINVAL;
++ atmci_init_debugfs(host);
++
++ return 0;
++
++out_free_irq:
++ if (host->detect_pin >= 0)
++ gpio_free(host->detect_pin);
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++ free_irq(irq, mmc);
++out_unmap:
++ iounmap(host->regs);
++out_disable_clk:
++ clk_disable(host->mck);
++ clk_put(host->mck);
++out_free_host:
++ mmc_free_host(mmc);
++ return ret;
++}
++
++static int __devexit atmci_remove(struct platform_device *pdev)
++{
++ struct atmel_mci *host = platform_get_drvdata(pdev);
++
++ platform_set_drvdata(pdev, NULL);
++
++ if (host) {
++ atmci_cleanup_debugfs(host);
++
++ if (host->detect_pin >= 0) {
++ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++ cancel_delayed_work(&host->mmc->detect);
++ gpio_free(host->detect_pin);
++ }
++
++ mmc_remove_host(host->mmc);
++
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ mci_readl(host, SR);
+
-+ spin_lock_irq(&rtc->lock);
-+ rtc->alarm_time = alarm_unix_time;
-+ rtc_writel(rtc, TOP, rtc->alarm_time);
-+ if (alrm->pending)
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ | RTC_BIT(CTRL_TOPEN));
-+ else
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ spin_unlock_irq(&rtc->lock);
++ dma_release_channel(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
+
-+ return ret;
-+}
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
+
-+static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ int ret = 0;
++ free_irq(platform_get_irq(pdev, 0), host->mmc);
++ iounmap(host->regs);
+
-+ spin_lock_irq(&rtc->lock);
++ clk_disable(host->mck);
++ clk_put(host->mck);
+
-+ switch (cmd) {
-+ case RTC_AIE_ON:
-+ if (rtc_readl(rtc, VAL) > rtc->alarm_time) {
-+ ret = -EINVAL;
-+ break;
-+ }
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ | RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
-+ break;
-+ case RTC_AIE_OFF:
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ break;
-+ default:
-+ ret = -ENOIOCTLCMD;
-+ break;
++ mmc_free_host(host->mmc);
+ }
++ return 0;
++}
+
-+ spin_unlock_irq(&rtc->lock);
++static struct platform_driver atmci_driver = {
++ .probe = atmci_probe,
++ .remove = __devexit_p(atmci_remove),
++ .driver = {
++ .name = DRIVER_NAME,
++ },
++};
+
-+ return ret;
++static int __init atmci_init(void)
++{
++ return platform_driver_register(&atmci_driver);
+}
+
-+static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
++static void __exit atmci_exit(void)
+{
-+ struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
-+ unsigned long isr = rtc_readl(rtc, ISR);
-+ unsigned long events = 0;
-+ int ret = IRQ_NONE;
++ platform_driver_unregister(&atmci_driver);
++}
+
-+ spin_lock(&rtc->lock);
++module_init(atmci_init);
++module_exit(atmci_exit);
+
-+ if (isr & RTC_BIT(ISR_TOPI)) {
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, VAL, rtc->alarm_time);
-+ events = RTC_AF | RTC_IRQF;
-+ rtc_update_irq(rtc->rtc, 1, events);
-+ ret = IRQ_HANDLED;
-+ }
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
+new file mode 100644
+index 0000000..60d15c4
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.h
+@@ -0,0 +1,192 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
+
-+ spin_unlock(&rtc->lock);
++/* MCI register offsets */
++#define MCI_CR 0x0000
++#define MCI_MR 0x0004
++#define MCI_DTOR 0x0008
++#define MCI_SDCR 0x000c
++#define MCI_ARGR 0x0010
++#define MCI_CMDR 0x0014
++#define MCI_BLKR 0x0018
++#define MCI_RSPR 0x0020
++#define MCI_RSPR1 0x0024
++#define MCI_RSPR2 0x0028
++#define MCI_RSPR3 0x002c
++#define MCI_RDR 0x0030
++#define MCI_TDR 0x0034
++#define MCI_SR 0x0040
++#define MCI_IER 0x0044
++#define MCI_IDR 0x0048
++#define MCI_IMR 0x004c
+
-+ return ret;
-+}
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET 0
++#define MCI_MCIEN_SIZE 1
++#define MCI_MCIDIS_OFFSET 1
++#define MCI_MCIDIS_SIZE 1
++#define MCI_PWSEN_OFFSET 2
++#define MCI_PWSEN_SIZE 1
++#define MCI_PWSDIS_OFFSET 3
++#define MCI_PWSDIS_SIZE 1
++#define MCI_SWRST_OFFSET 7
++#define MCI_SWRST_SIZE 1
+
-+static struct rtc_class_ops at32_rtc_ops = {
-+ .ioctl = at32_rtc_ioctl,
-+ .read_time = at32_rtc_readtime,
-+ .set_time = at32_rtc_settime,
-+ .read_alarm = at32_rtc_readalarm,
-+ .set_alarm = at32_rtc_setalarm,
-+};
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET 0
++#define MCI_CLKDIV_SIZE 8
++#define MCI_PWSDIV_OFFSET 8
++#define MCI_PWSDIV_SIZE 3
++#define MCI_RDPROOF_OFFSET 11
++#define MCI_RDPROOF_SIZE 1
++#define MCI_WRPROOF_OFFSET 12
++#define MCI_WRPROOF_SIZE 1
++#define MCI_DMAPADV_OFFSET 14
++#define MCI_DMAPADV_SIZE 1
++#define MCI_BLKLEN_OFFSET 16
++#define MCI_BLKLEN_SIZE 16
+
-+static int __init at32_rtc_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct rtc_at32ap700x *rtc;
-+ int irq = -1;
-+ int ret;
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET 0
++#define MCI_DTOCYC_SIZE 4
++#define MCI_DTOMUL_OFFSET 4
++#define MCI_DTOMUL_SIZE 3
+
-+ rtc = kzalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
-+ if (!rtc) {
-+ dev_dbg(&pdev->dev, "out of memory\n");
-+ return -ENOMEM;
-+ }
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET 0
++#define MCI_SDCSEL_SIZE 4
++#define MCI_SDCBUS_OFFSET 7
++#define MCI_SDCBUS_SIZE 1
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no mmio resource defined\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET 0
++#define MCI_ARG_SIZE 32
+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "could not get irq\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET 0
++#define MCI_CMDNB_SIZE 6
++#define MCI_RSPTYP_OFFSET 6
++#define MCI_RSPTYP_SIZE 2
++#define MCI_SPCMD_OFFSET 8
++#define MCI_SPCMD_SIZE 3
++#define MCI_OPDCMD_OFFSET 11
++#define MCI_OPDCMD_SIZE 1
++#define MCI_MAXLAT_OFFSET 12
++#define MCI_MAXLAT_SIZE 1
++#define MCI_TRCMD_OFFSET 16
++#define MCI_TRCMD_SIZE 2
++#define MCI_TRDIR_OFFSET 18
++#define MCI_TRDIR_SIZE 1
++#define MCI_TRTYP_OFFSET 19
++#define MCI_TRTYP_SIZE 2
+
-+ ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
-+ goto out;
-+ }
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET 0
++#define MCI_BCNT_SIZE 16
+
-+ rtc->irq = irq;
-+ rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!rtc->regs) {
-+ ret = -ENOMEM;
-+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+ goto out_free_irq;
-+ }
-+ spin_lock_init(&rtc->lock);
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET 0
++#define MCI_RSP_SIZE 32
+
-+ /*
-+ * Maybe init RTC: count from zero at 1 Hz, disable wrap irq.
-+ *
-+ * Do not reset VAL register, as it can hold an old time
-+ * from last JTAG reset.
-+ */
-+ if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
-+ rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
-+ | RTC_BIT(CTRL_EN));
-+ }
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET 0
++#define MCI_CMDRDY_SIZE 1
++#define MCI_RXRDY_OFFSET 1
++#define MCI_RXRDY_SIZE 1
++#define MCI_TXRDY_OFFSET 2
++#define MCI_TXRDY_SIZE 1
++#define MCI_BLKE_OFFSET 3
++#define MCI_BLKE_SIZE 1
++#define MCI_DTIP_OFFSET 4
++#define MCI_DTIP_SIZE 1
++#define MCI_NOTBUSY_OFFSET 5
++#define MCI_NOTBUSY_SIZE 1
++#define MCI_ENDRX_OFFSET 6
++#define MCI_ENDRX_SIZE 1
++#define MCI_ENDTX_OFFSET 7
++#define MCI_ENDTX_SIZE 1
++#define MCI_RXBUFF_OFFSET 14
++#define MCI_RXBUFF_SIZE 1
++#define MCI_TXBUFE_OFFSET 15
++#define MCI_TXBUFE_SIZE 1
++#define MCI_RINDE_OFFSET 16
++#define MCI_RINDE_SIZE 1
++#define MCI_RDIRE_OFFSET 17
++#define MCI_RDIRE_SIZE 1
++#define MCI_RCRCE_OFFSET 18
++#define MCI_RCRCE_SIZE 1
++#define MCI_RENDE_OFFSET 19
++#define MCI_RENDE_SIZE 1
++#define MCI_RTOE_OFFSET 20
++#define MCI_RTOE_SIZE 1
++#define MCI_DCRCE_OFFSET 21
++#define MCI_DCRCE_SIZE 1
++#define MCI_DTOE_OFFSET 22
++#define MCI_DTOE_SIZE 1
++#define MCI_OVRE_OFFSET 30
++#define MCI_OVRE_SIZE 1
++#define MCI_UNRE_OFFSET 31
++#define MCI_UNRE_SIZE 1
+
-+ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
-+ &at32_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc->rtc)) {
-+ dev_dbg(&pdev->dev, "could not register rtc device\n");
-+ ret = PTR_ERR(rtc->rtc);
-+ goto out_iounmap;
-+ }
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE 0
++#define MCI_DTOMUL_16_CYCLES 1
++#define MCI_DTOMUL_128_CYCLES 2
++#define MCI_DTOMUL_256_CYCLES 3
++#define MCI_DTOMUL_1024_CYCLES 4
++#define MCI_DTOMUL_4096_CYCLES 5
++#define MCI_DTOMUL_65536_CYCLES 6
++#define MCI_DTOMUL_1048576_CYCLES 7
+
-+ platform_set_drvdata(pdev, rtc);
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP 0
++#define MCI_RSPTYP_48_BIT 1
++#define MCI_RSPTYP_136_BIT 2
+
-+ dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
-+ (unsigned long)rtc->regs, rtc->irq);
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD 0
++#define MCI_SPCMD_INIT_CMD 1
++#define MCI_SPCMD_SYNC_CMD 2
++#define MCI_SPCMD_INT_CMD 4
++#define MCI_SPCMD_INT_RESP 5
+
-+ return 0;
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS 0
++#define MCI_TRCMD_START_TRANS 1
++#define MCI_TRCMD_STOP_TRANS 2
+
-+out_iounmap:
-+ iounmap(rtc->regs);
-+out_free_irq:
-+ free_irq(irq, rtc);
-+out:
-+ kfree(rtc);
-+ return ret;
-+}
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK 0
++#define MCI_TRTYP_MULTI_BLOCK 1
++#define MCI_TRTYP_STREAM 2
++
++/* Bit manipulation macros */
++#define MCI_BIT(name) \
++ (1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value) \
++ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
++ << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value) \
++ (((value) >> MCI_##name##_OFFSET) \
++ & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old) \
++ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
++ << MCI_##name##_OFFSET)) \
++ | MCI_BF(name,value))
++
++/* Register access macros */
++#define mci_readl(port,reg) \
++ __raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + MCI_##reg)
+
-+static int __exit at32_rtc_remove(struct platform_device *pdev)
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
+index 1707f98..d2ec6eb 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0001.c
++++ b/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -50,6 +50,7 @@
+ #define I82802AC 0x00ac
+ #define MANUFACTURER_ST 0x0020
+ #define M50LPW080 0x002F
++#define AT49BV640D 0x02de
+
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -157,6 +158,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
+ }
+ #endif
+
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+{
-+ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
++ struct map_info *map = mtd->priv;
++ struct cfi_private *cfi = map->fldrv_priv;
++ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++ struct cfi_pri_atmel atmel_pri;
++ uint32_t features = 0;
+
-+ free_irq(rtc->irq, rtc);
-+ iounmap(rtc->regs);
-+ rtc_device_unregister(rtc->rtc);
-+ kfree(rtc);
-+ platform_set_drvdata(pdev, NULL);
++ /* Reverse byteswapping */
++ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
+
-+ return 0;
-+}
++ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
+
-+static struct platform_driver at32_rtc_driver = {
-+ .remove = __exit_p(at32_rtc_remove),
-+ .driver = {
-+ .name = "rtc-at32ap700x",
-+ .owner = THIS_MODULE,
-+ },
-+};
++ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
+
-+static int __init at32_rtc_init(void)
-+{
-+ return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
-+}
-+module_init(at32_rtc_init);
++ if (atmel_pri.Features & 0x01) /* chip erase supported */
++ features |= (1<<0);
++ if (atmel_pri.Features & 0x02) /* erase suspend supported */
++ features |= (1<<1);
++ if (atmel_pri.Features & 0x04) /* program suspend supported */
++ features |= (1<<2);
++ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++ features |= (1<<9);
++ if (atmel_pri.Features & 0x20) /* page mode read supported */
++ features |= (1<<7);
++ if (atmel_pri.Features & 0x40) /* queued erase supported */
++ features |= (1<<4);
++ if (atmel_pri.Features & 0x80) /* Protection bits supported */
++ features |= (1<<6);
+
-+static void __exit at32_rtc_exit(void)
-+{
-+ platform_driver_unregister(&at32_rtc_driver);
++ extp->FeatureSupport = features;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
+}
-+module_exit(at32_rtc_exit);
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Real time clock for AVR32 AT32AP700x");
-+MODULE_LICENSE("GPL");
-diff -x .git -Nur linux-2.6.22.1/drivers/serial/atmel_serial.c linux-avr32.git/drivers/serial/atmel_serial.c
---- linux-2.6.22.1/drivers/serial/atmel_serial.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/serial/atmel_serial.c 2007-06-06 11:33:59.000000000 +0200
-@@ -114,6 +114,7 @@
- struct uart_port uart; /* uart */
- struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
-+ int break_active; /* break being received */
- };
-
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-@@ -252,6 +253,7 @@
- */
- static void atmel_rx_chars(struct uart_port *port)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- struct tty_struct *tty = port->info->tty;
- unsigned int status, ch, flg;
-
-@@ -267,13 +269,29 @@
- * note that the error handling code is
- * out of the main execution path
- */
-- if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
-+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
-+ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
-+ || atmel_port->break_active)) {
- UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
-- if (status & ATMEL_US_RXBRK) {
-+ if (status & ATMEL_US_RXBRK
-+ && !atmel_port->break_active) {
- status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
- port->icount.brk++;
-+ atmel_port->break_active = 1;
-+ UART_PUT_IER(port, ATMEL_US_RXBRK);
- if (uart_handle_break(port))
- goto ignore_char;
-+ } else {
-+ /*
-+ * This is either the end-of-break
-+ * condition or we've received at
-+ * least one character without RXBRK
-+ * being set. In both cases, the next
-+ * RXBRK will indicate start-of-break.
-+ */
-+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+ status &= ~ATMEL_US_RXBRK;
-+ atmel_port->break_active = 0;
- }
- if (status & ATMEL_US_PARE)
- port->icount.parity++;
-@@ -352,6 +370,16 @@
- /* Interrupt receive */
- if (pending & ATMEL_US_RXRDY)
- atmel_rx_chars(port);
-+ else if (pending & ATMEL_US_RXBRK) {
-+ /*
-+ * End of break detected. If it came along
-+ * with a character, atmel_rx_chars will
-+ * handle it.
-+ */
-+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+ atmel_port->break_active = 0;
-+ }
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -234,6 +276,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
+ }
- // TODO: All reads to CSR will clear these interrupts!
- if (pending & ATMEL_US_RIIC) port->icount.rng++;
-diff -x .git -Nur linux-2.6.22.1/drivers/spi/atmel_spi.c linux-avr32.git/drivers/spi/atmel_spi.c
---- linux-2.6.22.1/drivers/spi/atmel_spi.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/spi/atmel_spi.c 2007-06-06 11:33:59.000000000 +0200
-@@ -412,8 +412,8 @@
- csr |= SPI_BIT(NCPHA);
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 389acc6..571226e 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+ extp->TopBottom = 2;
+ else
+ extp->TopBottom = 3;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
- /* TODO: DLYBS and DLYBCT */
-- csr |= SPI_BF(DLYBS, 10);
-- csr |= SPI_BF(DLYBCT, 10);
-+ csr |= SPI_BF(DLYBS, 0);
-+ csr |= SPI_BF(DLYBCT, 0);
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
+ }
- /* chipselect must have been muxed as GPIO (e.g. in board setup) */
- npcs_pin = (unsigned int)spi->controller_data;
-diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c linux-avr32.git/drivers/usb/gadget/atmel_usba_udc.c
---- linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/usb/gadget/atmel_usba_udc.c 2007-07-12 14:00:19.000000000 +0200
-@@ -0,0 +1,2072 @@
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
+ #if !FORCE_WORD_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ { 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
+index 519b4ff..847f983 100644
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -276,6 +276,13 @@ config ELECTRA_CF
+ Say Y here to support the CompactFlash controller on the
+ PA Semi Electra eval board.
+
++config AT32_CF
++ tristate "AT32AP CompactFlash Controller"
++ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
++ help
++ Say Y here to support the CompactFlash controller on AT32 chips.
++ Or choose M to compile the driver as a module named "at32_cf".
++
+ config PCCARD_NONSTATIC
+ tristate
+
+diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
+index 6f6478b..3526fd8 100644
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
+ obj-$(CONFIG_OMAP_CF) += omap_cf.o
+ obj-$(CONFIG_AT91_CF) += at91_cf.o
+ obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
++obj-$(CONFIG_AT32_CF) += at32_cf.o
+
+ sa11xx_core-y += soc_common.o sa11xx_base.o
+ pxa2xx_core-y += soc_common.o pxa2xx_base.o
+diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c
+new file mode 100644
+index 0000000..010bdfd
+--- /dev/null
++++ b/drivers/pcmcia/at32_cf.c
+@@ -0,0 +1,533 @@
+/*
-+ * Driver for the Atmel USBA high speed USB device controller
++ * Driver for AVR32 Static Memory Controller: CompactFlash support
+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
++ * Copyright (C) 2006 Atmel Norway
+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
+ */
-+/* #define DEBUG */
-+
-+#include <linux/clk.h>
+#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/list.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb_gadget.h>
+#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++
++#include <pcmcia/ss.h>
+
+#include <asm/gpio.h>
++#include <asm/io.h>
+#include <asm/arch/board.h>
+
-+#include "atmel_usba_udc.h"
-+
-+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-+
-+#define FIFO_IOMEM_ID 0
-+#define CTRL_IOMEM_ID 1
-+
-+#ifdef DEBUG
-+#define DBG_ERR 0x0001 /* report all error returns */
-+#define DBG_HW 0x0002 /* debug hardware initialization */
-+#define DBG_GADGET 0x0004 /* calls to/from gadget driver */
-+#define DBG_INT 0x0008 /* interrupts */
-+#define DBG_BUS 0x0010 /* report changes in bus state */
-+#define DBG_QUEUE 0x0020 /* debug request queue processing */
-+#define DBG_FIFO 0x0040 /* debug FIFO contents */
-+#define DBG_DMA 0x0080 /* debug DMA handling */
-+#define DBG_REQ 0x0100 /* print out queued request length */
-+#define DBG_ALL 0xffff
-+#define DBG_NONE 0x0000
-+
-+#define DEBUG_LEVEL (DBG_ERR)
-+#define DBG(level, fmt, ...) \
-+ do { \
-+ if ((level) & DEBUG_LEVEL) \
-+ printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
-+ } while (0)
-+#else
-+#define DBG(level, fmt...)
-+#endif
-+
-+static struct usba_udc the_udc;
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+#include <linux/uaccess.h>
-+
-+static int queue_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct usba_ep *ep = inode->i_private;
-+ struct usba_request *req, *req_copy;
-+ struct list_head *queue_data;
-+
-+ queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
-+ if (!queue_data)
-+ return -ENOMEM;
-+ INIT_LIST_HEAD(queue_data);
-+
-+ spin_lock_irq(&ep->udc->lock);
-+ list_for_each_entry(req, &ep->queue, queue) {
-+ req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
-+ if (!req_copy)
-+ goto fail;
-+ memcpy(req_copy, req, sizeof(*req_copy));
-+ list_add_tail(&req_copy->queue, queue_data);
-+ }
-+ spin_unlock_irq(&ep->udc->lock);
-+
-+ file->private_data = queue_data;
-+ return 0;
++#include <asm/arch/smc.h>
+
-+fail:
-+ spin_unlock_irq(&ep->udc->lock);
-+ list_for_each_entry_safe(req, req_copy, queue_data, queue) {
-+ list_del(&req->queue);
-+ kfree(req);
-+ }
-+ kfree(queue_data);
-+ return -ENOMEM;
-+}
++struct at32_cf_socket {
++ struct pcmcia_socket socket;
++ int detect_pin;
++ int reset_pin;
++ int vcc_pin;
++ int ready_pin;
++ struct resource res_attr;
++ struct resource res_mem;
++ struct resource res_io;
++ struct smc_config smc;
++ unsigned int irq;
++ unsigned int cf_cs;
++ socket_state_t state;
++ unsigned present:1;
++};
++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
+
+/*
-+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
++ * We have the following memory layout relative to the base address:
+ *
-+ * b: buffer address
-+ * l: buffer length
-+ * I/i: interrupt/no interrupt
-+ * Z/z: zero/no zero
-+ * S/s: short ok/short not ok
-+ * s: status
-+ * n: nr_packets
-+ * F/f: submitted/not submitted to FIFO
-+ * D/d: using/not using DMA
-+ * L/l: last transaction/not last transaction
++ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
++ * True IDE Mode: 00c0 0000 -> 00df ffff
++ * I/O memory: 0080 0000 -> 00bf ffff
++ * Common memory: 0040 0000 -> 007f ffff
++ * Attribute memory: 0000 0000 -> 003f ffff
+ */
-+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct list_head *queue = file->private_data;
-+ struct usba_request *req, *tmp_req;
-+ size_t len, remaining, actual = 0;
-+ char tmpbuf[38];
-+
-+ if (!access_ok(VERIFY_WRITE, buf, nbytes))
-+ return -EFAULT;
-+
-+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
-+ list_for_each_entry_safe(req, tmp_req, queue, queue) {
-+ len = snprintf(tmpbuf, sizeof(tmpbuf),
-+ "%8p %08x %c%c%c %5d %c%c%c\n",
-+ req->req.buf, req->req.length,
-+ req->req.no_interrupt ? 'i' : 'I',
-+ req->req.zero ? 'Z' : 'z',
-+ req->req.short_not_ok ? 's' : 'S',
-+ req->req.status,
-+ req->submitted ? 'F' : 'f',
-+ req->using_dma ? 'D' : 'd',
-+ req->last_transaction ? 'L' : 'l');
-+ len = min(len, sizeof(tmpbuf));
-+ if (len > nbytes)
-+ break;
-+
-+ list_del(&req->queue);
-+ kfree(req);
-+
-+ remaining = __copy_to_user(buf, tmpbuf, len);
-+ actual += len - remaining;
-+ if (remaining)
-+ break;
-+
-+ nbytes -= len;
-+ buf += len;
-+ }
-+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-+
-+ return actual;
-+}
-+
-+static int queue_dbg_release(struct inode *inode, struct file *file)
-+{
-+ struct list_head *queue_data = file->private_data;
-+ struct usba_request *req, *tmp_req;
-+
-+ list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
-+ list_del(&req->queue);
-+ kfree(req);
-+ }
-+ kfree(queue_data);
-+ return 0;
-+}
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct usba_udc *udc;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
-+
-+ mutex_lock(&inode->i_mutex);
-+ udc = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
-+
-+ spin_lock_irq(&udc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(udc->regs + i * 4);
-+ spin_unlock_irq(&udc->lock);
-+
-+ file->private_data = data;
-+ ret = 0;
-+
-+out:
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
-+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+const struct file_operations queue_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = queue_dbg_open,
-+ .llseek = no_llseek,
-+ .read = queue_dbg_read,
-+ .release = queue_dbg_release,
-+};
-+
-+const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
-+};
-+
-+static void usba_ep_init_debugfs(struct usba_udc *udc,
-+ struct usba_ep *ep)
-+{
-+ struct dentry *ep_root;
-+
-+ ep_root = debugfs_create_dir(ep_name(ep), udc->debugfs_root);
-+ if (!ep_root)
-+ goto err_root;
-+ ep->debugfs_dir = ep_root;
-+
-+ ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
-+ ep, &queue_dbg_fops);
-+ if (!ep->debugfs_queue)
-+ goto err_queue;
-+
-+ if (ep_can_dma(ep)) {
-+ ep->debugfs_dma_status
-+ = debugfs_create_u32("dma_status", 0400, ep_root,
-+ &ep->last_dma_status);
-+ if (!ep->debugfs_dma_status)
-+ goto err_dma_status;
-+ }
-+ if (ep_is_control(ep)) {
-+ ep->debugfs_state
-+ = debugfs_create_u32("state", 0400, ep_root,
-+ &ep->state);
-+ if (!ep->debugfs_state)
-+ goto err_state;
-+ }
-+
-+ return;
-+
-+err_state:
-+ if (ep_can_dma(ep))
-+ debugfs_remove(ep->debugfs_dma_status);
-+err_dma_status:
-+ debugfs_remove(ep->debugfs_queue);
-+err_queue:
-+ debugfs_remove(ep_root);
-+err_root:
-+ dev_err(&ep->udc->pdev->dev,
-+ "failed to create debugfs directory for %s\n", ep_name(ep));
-+}
++#define CF_ATTR_OFFSET 0x00000000
++#define CF_MEM_OFFSET 0x00400000
++#define CF_IO_OFFSET 0x00800000
++#define CF_RES_SIZE 4096
+
-+static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
-+{
-+ debugfs_remove(ep->debugfs_queue);
-+ debugfs_remove(ep->debugfs_dma_status);
-+ debugfs_remove(ep->debugfs_state);
-+ debugfs_remove(ep->debugfs_dir);
-+ ep->debugfs_dma_status = NULL;
-+ ep->debugfs_dir = NULL;
-+}
-+
-+static void usba_init_debugfs(struct usba_udc *udc)
-+{
-+ struct dentry *root, *regs;
-+ struct resource *regs_resource;
-+
-+ root = debugfs_create_dir(udc->gadget.name, NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ udc->debugfs_root = root;
-+
-+ regs = debugfs_create_file("regs", 0400, root, udc, ®s_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
-+
-+ regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
-+ CTRL_IOMEM_ID);
-+ regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
-+ udc->debugfs_regs = regs;
-+
-+ usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
-+
-+ return;
++#ifdef DEBUG
+
-+err_regs:
-+ debugfs_remove(root);
-+err_root:
-+ udc->debugfs_root = NULL;
-+ dev_err(&udc->pdev->dev, "debugfs is not available\n");
-+}
++static int pc_debug;
++module_param(pc_debug, int, 0644);
+
-+static void usba_cleanup_debugfs(struct usba_udc *udc)
++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
++ int level, const char *fmt, ...)
+{
-+ usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
-+ debugfs_remove(udc->debugfs_regs);
-+ debugfs_remove(udc->debugfs_root);
-+ udc->debugfs_regs = NULL;
-+ udc->debugfs_root = NULL;
++ va_list args;
++
++ if (pc_debug > level) {
++ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
++ va_start(args, fmt);
++ vprintk(fmt, args);
++ va_end(args);
++ }
+}
++
++#define debug(cf, lvl, fmt, arg...) \
++ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
++
+#else
-+static inline void usba_ep_init_debugfs(struct usba_udc *udc,
-+ struct usba_ep *ep)
++#define debug(cf, lvl, fmt, arg...) do { } while (0)
++#endif
++
++static inline int at32_cf_present(struct at32_cf_socket *cf)
+{
++ int present = 1;
++
++ /* If we don't have a detect pin, assume the card is present */
++ if (cf->detect_pin >= 0)
++ present = !gpio_get_value(cf->detect_pin);
+
++ return present;
+}
+
-+static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++static irqreturn_t at32_cf_irq(int irq, void *dev_id)
+{
++ struct at32_cf_socket *cf = dev_id;
++ unsigned int present;
++
++ present = at32_cf_present(cf);
++ if (present != cf->present) {
++ cf->present = present;
++ debug(cf, 3, "card %s\n", present ? "present" : "gone");
++ pcmcia_parse_events(&cf->socket, SS_DETECT);
++ }
+
++ return IRQ_HANDLED;
+}
+
-+static inline void usba_init_debugfs(struct usba_udc *udc)
++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
+{
++ struct at32_cf_socket *cf;
++ u_int status = 0;
++
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ if (at32_cf_present(cf)) {
++ /* NOTE: gpio on AP7xxx is 3.3V */
++ status = SS_DETECT | SS_3VCARD;
++ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
++ status |= SS_READY;
++ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
++ status |= SS_POWERON;
++ }
+
++ *value = status;
++ return 0;
+}
+
-+static inline void usba_cleanup_debugfs(struct usba_udc *udc)
++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
+{
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
++ (state->csc_mask==0)?"<NONE> ":"",
++ (state->csc_mask&SS_DETECT)?"DETECT ":"",
++ (state->csc_mask&SS_READY)?"READY ":"",
++ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
++ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
++ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
++ (state->flags==0)?"<NONE> ":"",
++ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
++ (state->flags&SS_IOCARD)?"IOCARD ":"",
++ (state->flags&SS_RESET)?"RESET ":"",
++ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
++ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
++ state->Vcc, state->Vpp, state->io_irq);
+
-+}
-+#endif
++ /*
++ * TODO: Allow boards to override this in case they have level
++ * converters.
++ */
++ switch (state->Vcc) {
++ case 0:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 0);
++ break;
++ case 33:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 1);
++ break;
++ default:
++ return -EINVAL;
++ }
+
-+static int vbus_is_present(struct usba_udc *udc)
-+{
-+ if (udc->vbus_pin != -1)
-+ return gpio_get_value(udc->vbus_pin);
++ if (cf->reset_pin >= 0)
++ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
++
++ cf->state = *state;
+
-+ /* No Vbus detection: Assume always present */
-+ return 1;
++ return 0;
+}
+
-+static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
++static int at32_cf_socket_init(struct pcmcia_socket *sock)
+{
-+ unsigned long tmp;
++ debug(to_at32_cf(sock), 2, "called\n");
+
-+ DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
-+ for (; len > 0; len -= 4, buf += 4, fifo += 4) {
-+ tmp = *(unsigned long *)buf;
-+ if (len >= 4) {
-+ DBG(DBG_FIFO, " -> %08lx\n", tmp);
-+ __raw_writel(tmp, fifo);
-+ } else {
-+ do {
-+ DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
-+ __raw_writeb(tmp >> 24, fifo);
-+ fifo++;
-+ tmp <<= 8;
-+ } while (--len);
-+ break;
-+ }
-+ }
++ return 0;
+}
+
-+static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
++static int at32_cf_suspend(struct pcmcia_socket *sock)
+{
-+ union {
-+ unsigned long *w;
-+ unsigned char *b;
-+ } p;
-+ unsigned long tmp;
++ debug(to_at32_cf(sock), 2, "called\n");
+
-+ DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
-+ for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
-+ if (len >= 4) {
-+ tmp = __raw_readl(fifo);
-+ *p.w = tmp;
-+ DBG(DBG_FIFO, " -> %08lx\n", tmp);
-+ } else {
-+ do {
-+ tmp = __raw_readb(fifo);
-+ *p.b = tmp;
-+ DBG(DBG_FIFO, " -> %02lx\n", tmp);
-+ fifo++, p.b++;
-+ } while (--len);
-+ }
-+ }
++ at32_cf_set_socket(sock, &dead_socket);
++
++ return 0;
+}
+
-+static void next_fifo_transaction(struct usba_ep *ep,
-+ struct usba_request *req)
++static int at32_cf_set_io_map(struct pcmcia_socket *sock,
++ struct pccard_io_map *map)
+{
-+ unsigned int transaction_len;
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++ int retval;
++
++ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
++ map->map, map->speed, map->start, map->stop);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags == 0) ? "<NONE>":"",
++ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
++ (map->flags & MAP_16BIT) ? "16BIT " : "",
++ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
++ (map->flags & MAP_0WS) ? "0WS " : "",
++ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
++ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
++ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
++
++ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
++
++ if (map->flags & MAP_16BIT)
++ cf->smc.bus_width = 2;
++ else
++ cf->smc.bus_width = 1;
++
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
+
-+ transaction_len = req->req.length - req->req.actual;
-+ req->last_transaction = 1;
-+ if (transaction_len > ep->ep.maxpacket) {
-+ transaction_len = ep->ep.maxpacket;
-+ req->last_transaction = 0;
-+ } else if (transaction_len == ep->ep.maxpacket
-+ && req->req.zero) {
-+ req->last_transaction = 0;
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
++ return retval;
+ }
-+ DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
-+ ep_name(ep), req, transaction_len,
-+ req->last_transaction ? ", done" : "");
+
-+ copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+ usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
-+ req->req.actual += transaction_len;
++ map->start = cf->socket.io_offset;
++ map->stop = map->start + CF_RES_SIZE - 1;
++
++ return 0;
+}
+
-+static void submit_request(struct usba_ep *ep, struct usba_request *req)
++static int
++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
+{
-+ DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
-+ ep_name(ep), req, req->req.length);
-+
-+ req->req.actual = 0;
-+ req->submitted = 1;
++ struct at32_cf_socket *cf;
++ struct resource *res;
++ int retval;
++
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "map %u speed %u card_start %08x\n",
++ map->map, map->speed, map->card_start);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags==0)?"<NONE>":"",
++ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
++ (map->flags&MAP_16BIT)?"16BIT ":"",
++ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
++ (map->flags&MAP_0WS)?"0WS ":"",
++ (map->flags&MAP_WRPROT)?"WRPROT ":"",
++ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
++ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
++
++ if (map->card_start)
++ return -EINVAL;
+
-+ if (req->using_dma) {
-+ if (req->req.length == 0) {
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
-+ return;
-+ }
++ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
+
-+ if (req->req.zero)
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(SHORT_PACKET));
-+ else
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(SHORT_PACKET));
++ if (map->flags & MAP_ATTRIB) {
++ res = &cf->res_attr;
+
-+ usba_dma_writel(ep, ADDRESS, req->req.dma);
-+ usba_dma_writel(ep, CONTROL, req->ctrl);
++ /* Linksys WCF12 seems to use WAIT when reading CIS */
++ map->flags |= MAP_USE_WAIT;
+ } else {
-+ next_fifo_transaction(ep, req);
-+ if (req->last_transaction) {
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
-+ } else {
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
-+ }
++ res = &cf->res_mem;
+ }
-+}
+
-+static void submit_next_request(struct usba_ep *ep)
-+{
-+ struct usba_request *req;
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
+
-+ if (list_empty(&ep->queue)) {
-+ usba_ep_writel(ep, CTL_DIS, (USBA_BIT(TX_PK_RDY)
-+ | USBA_BIT(RX_BK_RDY)));
-+ return;
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
++ return retval;
+ }
+
-+ req = list_entry(ep->queue.next, struct usba_request, queue);
-+ if (!req->submitted)
-+ submit_request(ep, req);
++ map->static_start = res->start;
++
++ return 0;
+}
+
-+static void send_status(struct usba_udc *udc, struct usba_ep *ep)
++static struct pccard_operations at32_cf_ops = {
++ .init = at32_cf_socket_init,
++ .suspend = at32_cf_suspend,
++ .get_status = at32_cf_get_status,
++ .set_socket = at32_cf_set_socket,
++ .set_io_map = at32_cf_set_io_map,
++ .set_mem_map = at32_cf_set_mem_map,
++};
++
++static int __init request_pin(struct platform_device *pdev,
++ unsigned int pin, const char *name)
+{
-+ ep->state = STATUS_STAGE_IN;
-+ usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
++ if (gpio_request(pin, name)) {
++ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
++ return -1;
++ }
++
++ return pin;
+}
+
-+static void receive_data(struct usba_ep *ep)
++static struct smc_timing at32_cf_timing __initdata = {
++ .ncs_read_setup = 30,
++ .nrd_setup = 100,
++ .ncs_write_setup = 30,
++ .nwe_setup = 100,
++
++ .ncs_read_pulse = 360,
++ .nrd_pulse = 290,
++ .ncs_write_pulse = 360,
++ .nwe_pulse = 290,
++
++ .read_cycle = 420,
++ .write_cycle = 420,
++};
++
++static int __init at32_cf_probe(struct platform_device *pdev)
+{
-+ struct usba_udc *udc = ep->udc;
-+ struct usba_request *req;
-+ unsigned long status;
-+ unsigned int bytecount, nr_busy;
-+ int is_complete = 0;
++ struct at32_cf_socket *cf;
++ struct cf_platform_data *board = pdev->dev.platform_data;
++ struct resource *res_skt;
++ int irq;
++ int ret;
+
-+ status = usba_ep_readl(ep, STA);
-+ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++ dev_dbg(&pdev->dev, "probe");
+
-+ DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
++ if (!board)
++ return -ENXIO;
+
-+ while (nr_busy > 0) {
-+ if (list_empty(&ep->queue)) {
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
-+ break;
-+ }
-+ req = list_entry(ep->queue.next,
-+ struct usba_request, queue);
++ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res_skt)
++ return -ENXIO;
+
-+ bytecount = USBA_BFEXT(BYTE_COUNT, status);
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
+
-+ if (status & (1 << 31))
-+ is_complete = 1;
-+ if (req->req.actual + bytecount >= req->req.length) {
-+ is_complete = 1;
-+ bytecount = req->req.length - req->req.actual;
-+ }
++ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
++ if (!cf)
++ return -ENOMEM;
+
-+ copy_from_fifo(req->req.buf + req->req.actual,
-+ ep->fifo, bytecount);
-+ req->req.actual += bytecount;
++ cf->detect_pin = -1;
++ cf->reset_pin = -1;
++ cf->vcc_pin = -1;
++ cf->ready_pin = -1;
++ cf->cf_cs = board->cs;
++
++ if (board->detect_pin != GPIO_PIN_NONE)
++ cf->detect_pin = request_pin(pdev, board->detect_pin,
++ "cf_detect");
++ if (board->reset_pin != GPIO_PIN_NONE)
++ cf->reset_pin = request_pin(pdev, board->reset_pin,
++ "cf_reset");
++ if (board->vcc_pin != GPIO_PIN_NONE)
++ cf->vcc_pin = request_pin(pdev, board->vcc_pin,
++ "cf_vcc");
++ if (board->ready_pin != GPIO_PIN_NONE)
++ /* READY is also used for irq through EIM */
++ cf->ready_pin = board->ready_pin;
++
++ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
++ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
++
++ cf->socket.pci_irq = irq;
++ cf->socket.ops = &at32_cf_ops;
++ cf->socket.resource_ops = &pccard_static_ops;
++ cf->socket.dev.parent = &pdev->dev;
++ cf->socket.owner = THIS_MODULE;
++ cf->socket.features =
++ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++ cf->socket.map_size = CF_RES_SIZE;
++
++ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
++ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
++ cf->res_attr.name = "attribute";
++ cf->res_attr.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_attr);
++ if (ret)
++ goto err_request_res_attr;
+
-+ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
++ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
++ cf->res_mem.name = "memory";
++ cf->res_mem.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_mem);
++ if (ret)
++ goto err_request_res_mem;
+
-+ if (is_complete) {
-+ DBG(DBG_QUEUE, "%s: request done\n", ep_name(ep));
-+ req->req.status = 0;
-+ list_del_init(&req->queue);
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
-+ req->req.complete(&ep->ep, &req->req);
-+ }
++ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
++ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
++ cf->res_io.name = "io";
++ cf->res_io.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_io);
++ if (ret)
++ goto err_request_res_io;
+
-+ status = usba_ep_readl(ep, STA);
-+ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++ cf->socket.io_offset = cf->res_io.start;
+
-+ if (is_complete && ep_is_control(ep)) {
-+ send_status(udc, ep);
-+ break;
++ if (cf->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
++ IRQF_SHARED, "cf_detect", cf);
++ if (ret) {
++ debug(cf, 1,
++ "failed to request cf_detect interrupt\n");
++ goto err_detect_irq;
+ }
+ }
-+}
+
-+static void request_complete(struct usba_ep *ep,
-+ struct usba_request *req,
-+ int status)
-+{
-+ struct usba_udc *udc = ep->udc;
++ cf->present = at32_cf_present(cf);
++
++ /* Setup SMC timings */
++ smc_set_timing(&cf->smc, &at32_cf_timing);
+
-+ WARN_ON(!list_empty(&req->queue));
++ cf->smc.bus_width = 2;
++ cf->smc.nrd_controlled = 1;
++ cf->smc.nwe_controlled = 1;
++ cf->smc.nwait_mode = 0;
++ cf->smc.byte_write = 0;
++ cf->smc.tdf_cycles = 8;
++ cf->smc.tdf_mode = 0;
+
-+ if (req->req.status == -EINPROGRESS)
-+ req->req.status = status;
++ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (ret) {
++ debug(cf, 1, "failed to configure SMC\n", ret);
++ goto err_smc;
++ }
+
-+ if (req->mapped) {
-+ dma_unmap_single(
-+ &udc->pdev->dev, req->req.dma, req->req.length,
-+ ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+ req->req.dma = DMA_ADDR_INVALID;
-+ req->mapped = 0;
++ ret = pcmcia_register_socket(&cf->socket);
++ if (ret) {
++ debug(cf, 1, "failed to register socket: %d\n", ret);
++ goto err_register_socket;
+ }
+
-+ DBG(DBG_GADGET | DBG_REQ,
-+ "%s: req %p complete: status %d, actual %u\n",
-+ ep_name(ep), req, req->req.status, req->req.actual);
-+ req->req.complete(&ep->ep, &req->req);
++ if (cf->reset_pin >= 0)
++ gpio_direction_output(cf->reset_pin, 0);
++
++ platform_set_drvdata(pdev, cf);
++
++ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
++ (unsigned long)res_skt->start);
++
++ return 0;
++
++err_register_socket:
++err_smc:
++ if (cf->detect_pin >= 0)
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++err_detect_irq:
++ release_resource(&cf->res_io);
++err_request_res_io:
++ release_resource(&cf->res_mem);
++err_request_res_mem:
++ release_resource(&cf->res_attr);
++err_request_res_attr:
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++ if (cf->detect_pin >= 0)
++ gpio_free(cf->detect_pin);
++ kfree(cf);
++
++ return ret;
+}
+
-+static void request_complete_list(struct usba_ep *ep,
-+ struct list_head *list,
-+ int status)
++static int __exit at32_cf_remove(struct platform_device *pdev)
+{
-+ struct usba_request *req, *tmp_req;
++ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
+
-+ list_for_each_entry_safe(req, tmp_req, list, queue) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, status);
++ pcmcia_unregister_socket(&cf->socket);
++ if (cf->detect_pin >= 0) {
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++ gpio_free(cf->detect_pin);
+ }
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++
++ release_resource(&cf->res_io);
++ release_resource(&cf->res_mem);
++ release_resource(&cf->res_attr);
++ kfree(cf);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
+}
+
-+static int usba_ep_enable(struct usb_ep *_ep,
-+ const struct usb_endpoint_descriptor *desc)
++static struct platform_driver at32_cf_driver = {
++ .remove = __exit_p(at32_cf_remove),
++ .driver = {
++ .name = "at32_cf",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at32_cf_init(void)
+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ unsigned long flags, ept_cfg, maxpacket;
++ int ret;
+
-+ DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep_name(ep), desc);
++ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
++ if (ret)
++ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
++ return ret;
++}
+
-+ maxpacket = le16_to_cpu(desc->wMaxPacketSize);
++static void __exit at32_cf_exit(void)
++{
++ platform_driver_unregister(&at32_cf_driver);
++}
+
-+ if (ep->index == 0
-+ || desc->bDescriptorType != USB_DT_ENDPOINT
-+ || ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
-+ != ep->index)
-+ || maxpacket == 0
-+ || maxpacket > ep->fifo_size) {
-+ DBG(DBG_ERR, "ep_enable: Invalid argument");
-+ return -EINVAL;
-+ }
++module_init(at32_cf_init);
++module_exit(at32_cf_exit);
+
-+ ep->is_isoc = 0;
-+ ep->is_in = 0;
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
+index d7e1996..67bfbb0 100644
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -380,6 +380,21 @@ config SERIAL_ATMEL_CONSOLE
+ console is the device which receives all kernel messages and
+ warnings and which allows logins in single user mode).
+
++config SERIAL_ATMEL_PDC
++ bool "Support DMA transfers on AT91 / AT32 serial port"
++ depends on SERIAL_ATMEL
++ default y
++ help
++ Say Y here if you wish to use the PDC to do DMA transfers to
++ and from the Atmel AT91 / AT32 serial port. In order to
++ actually use DMA transfers, make sure that the use_dma_tx
++ and use_dma_rx members in the atmel_uart_data struct is set
++ appropriately for each port.
++
++ Note that break and error handling currently doesn't work
++ properly when DMA is enabled. Make sure that ports where
++ this matters don't use DMA.
++
+ config SERIAL_ATMEL_TTYAT
+ bool "Install as device ttyATn instead of ttySn"
+ depends on SERIAL_ATMEL=y
+diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
+index 111da57..477950f 100644
+--- a/drivers/serial/atmel_serial.c
++++ b/drivers/serial/atmel_serial.c
+@@ -7,6 +7,8 @@
+ * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
++ * DMA support added by Chip Coldwell.
++ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+@@ -33,6 +35,7 @@
+ #include <linux/sysrq.h>
+ #include <linux/tty_flip.h>
+ #include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
+ #include <linux/atmel_pdc.h>
+
+ #include <asm/io.h>
+@@ -47,6 +50,10 @@
+
+ #include "atmel_serial.h"
+
++#define PDC_BUFFER_SIZE 512
++/* Revisit: We should calculate this based on the actual port settings */
++#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
+
-+ if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-+ == USB_ENDPOINT_XFER_ISOC) {
-+ if (!ep->can_isoc) {
-+ DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
-+ ep_name(ep));
-+ return -EINVAL;
-+ }
-+ ep->is_isoc = 1;
-+ }
+ #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+ #define SUPPORT_SYSRQ
+ #endif
+@@ -74,6 +81,7 @@
+
+ #define ATMEL_ISR_PASS_LIMIT 256
+
++/* UART registers. CR is write-only, hence no GET macro */
+ #define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
+ #define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
+ #define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
+@@ -87,8 +95,6 @@
+ #define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
+ #define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
+
+-// #define UART_GET_CR(port) __raw_readl((port)->membase + ATMEL_US_CR) // is write-only
+-
+ /* PDC registers */
+ #define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+ #define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
+@@ -101,12 +107,24 @@
+
+ #define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
+ #define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+-//#define UART_PUT_TNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
+-//#define UART_PUT_TNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
+
+ static int (*atmel_open_hook)(struct uart_port *);
+ static void (*atmel_close_hook)(struct uart_port *);
+
++struct atmel_dma_buffer {
++ unsigned char *buf;
++ dma_addr_t dma_addr;
++ unsigned int dma_size;
++ unsigned int ofs;
++};
+
-+ if (maxpacket <= 8)
-+ ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
-+ else
-+ /* LSB is bit 1, not 0 */
-+ ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
-+ DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
-+ ep_name(ep), ept_cfg, maxpacket);
++struct atmel_uart_char {
++ u16 status;
++ u16 ch;
++};
+
-+ if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ ep->is_in = 1;
-+ ept_cfg |= USBA_BIT(EPT_DIR);
-+ }
++#define ATMEL_SERIAL_RINGSIZE 1024
+
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_CONTROL:
-+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
-+ break;
-+ case USB_ENDPOINT_XFER_BULK:
-+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
-+ break;
-+ }
-+ ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
+ /*
+ * We wrap our port structure around the generic uart_port.
+ */
+@@ -115,6 +133,19 @@ struct atmel_uart_port {
+ struct clk *clk; /* uart clock */
+ unsigned short suspended; /* is port suspended? */
+ int break_active; /* break being received */
+
-+ spin_lock_irqsave(&ep->udc->lock, flags);
++ short use_dma_rx; /* enable PDC receiver */
++ short pdc_rx_idx; /* current PDC RX buffer */
++ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
+
-+ if (ep->desc) {
-+ spin_unlock_irqrestore(&ep->udc->lock, flags);
-+ DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
-+ return -EBUSY;
-+ }
++ short use_dma_tx; /* enable PDC transmitter */
++ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
+
-+ ep->desc = desc;
-+ ep->ep.maxpacket = maxpacket;
++ struct tasklet_struct tasklet;
++ unsigned int irq_status;
++ unsigned int irq_status_prev;
+
-+ usba_ep_writel(ep, CFG, ept_cfg);
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
++ struct circ_buf rx_ring;
+ };
+
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+@@ -123,6 +154,38 @@ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+ static struct console atmel_console;
+ #endif
+
++static inline struct atmel_uart_port *
++to_atmel_uart_port(struct uart_port *uart)
++{
++ return container_of(uart, struct atmel_uart_port, uart);
++}
+
-+ if (ep_can_dma(ep)) {
-+ u32 ctrl;
++#ifdef CONFIG_SERIAL_ATMEL_PDC
++static bool atmel_use_dma_rx(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
-+ usba_writel(udc, INT_ENB,
-+ (usba_readl(udc, INT_ENB)
-+ | USBA_BF(EPT_INT, 1 << ep->index)
-+ | USBA_BF(DMA_INT, 1 << ep->index)));
-+ ctrl = USBA_BIT(AUTO_VALID) | USBA_BIT(INTDIS_DMA);
-+ usba_ep_writel(ep, CTL_ENB, ctrl);
-+ } else {
-+ usba_writel(udc, INT_ENB,
-+ (usba_readl(udc, INT_ENB)
-+ | USBA_BF(EPT_INT, 1 << ep->index)));
-+ }
++ return atmel_port->use_dma_rx;
++}
+
-+ spin_unlock_irqrestore(&udc->lock, flags);
++static bool atmel_use_dma_tx(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
-+ DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
-+ (unsigned long)usba_ep_readl(ep, CFG));
-+ DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
-+ (unsigned long)usba_readl(udc, INT_ENB));
++ return atmel_port->use_dma_tx;
++}
++#else
++static bool atmel_use_dma_rx(struct uart_port *port)
++{
++ return false;
++}
+
-+ return 0;
++static bool atmel_use_dma_tx(struct uart_port *port)
++{
++ return false;
+}
++#endif
++
+ /*
+ * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
+ */
+@@ -142,8 +205,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
+ #ifdef CONFIG_ARCH_AT91RM9200
+ if (cpu_is_at91rm9200()) {
+ /*
+- * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
+- * We need to drive the pin manually.
++ * AT91RM9200 Errata #39: RTS0 is not internally connected
++ * to PA21. We need to drive the pin manually.
+ */
+ if (port->mapbase == AT91RM9200_BASE_US0) {
+ if (mctrl & TIOCM_RTS)
+@@ -204,7 +267,12 @@ static u_int atmel_get_mctrl(struct uart_port *port)
+ */
+ static void atmel_stop_tx(struct uart_port *port)
+ {
+- UART_PUT_IDR(port, ATMEL_US_TXRDY);
++ if (atmel_use_dma_tx(port)) {
++ /* disable PDC transmit */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ } else
++ UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ }
+
+ /*
+@@ -212,7 +280,17 @@ static void atmel_stop_tx(struct uart_port *port)
+ */
+ static void atmel_start_tx(struct uart_port *port)
+ {
+- UART_PUT_IER(port, ATMEL_US_TXRDY);
++ if (atmel_use_dma_tx(port)) {
++ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
++ /* The transmitter is already running. Yes, we
++ really need this.*/
++ return;
+
-+static int usba_ep_disable(struct usb_ep *_ep)
++ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ /* re-enable PDC transmit */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
++ } else
++ UART_PUT_IER(port, ATMEL_US_TXRDY);
+ }
+
+ /*
+@@ -220,7 +298,12 @@ static void atmel_start_tx(struct uart_port *port)
+ */
+ static void atmel_stop_rx(struct uart_port *port)
+ {
+- UART_PUT_IDR(port, ATMEL_US_RXRDY);
++ if (atmel_use_dma_rx(port)) {
++ /* disable PDC receive */
++ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
++ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++ } else
++ UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
+
+ /*
+@@ -228,7 +311,8 @@ static void atmel_stop_rx(struct uart_port *port)
+ */
+ static void atmel_enable_ms(struct uart_port *port)
+ {
+- UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
++ UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
++ | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
+ }
+
+ /*
+@@ -243,22 +327,63 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
+ }
+
+ /*
++ * Stores the incoming character in the ring buffer
++ */
++static void
++atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
++ unsigned int ch)
+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ LIST_HEAD(req_list);
-+ unsigned long flags;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++ struct circ_buf *ring = &atmel_port->rx_ring;
++ struct atmel_uart_char *c;
+
-+ DBG(DBG_GADGET, "ep_disable: %s\n", ep_name(ep));
++ if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
++ /* Buffer overflow, ignore char */
++ return;
+
-+ spin_lock_irqsave(&udc->lock, flags);
++ c = &((struct atmel_uart_char *)ring->buf)[ring->head];
++ c->status = status;
++ c->ch = ch;
+
-+ if (!ep->desc) {
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+ DBG(DBG_ERR, "ep_disable: %s not enabled\n",
-+ ep_name(ep));
-+ return -EINVAL;
++ /* Make sure the character is stored before we update head. */
++ smp_wmb();
++
++ ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
++}
++
++/*
++ * Deal with parity, framing and overrun errors.
++ */
++static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
++{
++ /* clear error */
++ UART_PUT_CR(port, ATMEL_US_RSTSTA);
++
++ if (status & ATMEL_US_RXBRK) {
++ /* ignore side-effect */
++ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
++ port->icount.brk++;
+ }
-+ ep->desc = NULL;
++ if (status & ATMEL_US_PARE)
++ port->icount.parity++;
++ if (status & ATMEL_US_FRAME)
++ port->icount.frame++;
++ if (status & ATMEL_US_OVRE)
++ port->icount.overrun++;
++}
++
++/*
+ * Characters received (called from interrupt handler)
+ */
+ static void atmel_rx_chars(struct uart_port *port)
+ {
+- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+- struct tty_struct *tty = port->info->tty;
+- unsigned int status, ch, flg;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++ unsigned int status, ch;
+
+ status = UART_GET_CSR(port);
+ while (status & ATMEL_US_RXRDY) {
+ ch = UART_GET_CHAR(port);
+
+- port->icount.rx++;
+-
+- flg = TTY_NORMAL;
+-
+ /*
+ * note that the error handling code is
+ * out of the main execution path
+@@ -266,15 +391,14 @@ static void atmel_rx_chars(struct uart_port *port)
+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
+ || atmel_port->break_active)) {
+- UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
++
++ /* clear error */
++ UART_PUT_CR(port, ATMEL_US_RSTSTA);
++
+ if (status & ATMEL_US_RXBRK
+ && !atmel_port->break_active) {
+- status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
+- port->icount.brk++;
+ atmel_port->break_active = 1;
+ UART_PUT_IER(port, ATMEL_US_RXBRK);
+- if (uart_handle_break(port))
+- goto ignore_char;
+ } else {
+ /*
+ * This is either the end-of-break
+@@ -287,52 +411,30 @@ static void atmel_rx_chars(struct uart_port *port)
+ status &= ~ATMEL_US_RXBRK;
+ atmel_port->break_active = 0;
+ }
+- if (status & ATMEL_US_PARE)
+- port->icount.parity++;
+- if (status & ATMEL_US_FRAME)
+- port->icount.frame++;
+- if (status & ATMEL_US_OVRE)
+- port->icount.overrun++;
+-
+- status &= port->read_status_mask;
+-
+- if (status & ATMEL_US_RXBRK)
+- flg = TTY_BREAK;
+- else if (status & ATMEL_US_PARE)
+- flg = TTY_PARITY;
+- else if (status & ATMEL_US_FRAME)
+- flg = TTY_FRAME;
+ }
+
+- if (uart_handle_sysrq_char(port, ch))
+- goto ignore_char;
+-
+- uart_insert_char(port, status, ATMEL_US_OVRE, ch, flg);
+-
+- ignore_char:
++ atmel_buffer_rx_char(port, status, ch);
+ status = UART_GET_CSR(port);
+ }
+
+- tty_flip_buffer_push(tty);
++ tasklet_schedule(&atmel_port->tasklet);
+ }
+
+ /*
+- * Transmit characters (called from interrupt handler)
++ * Transmit characters (called from tasklet with TXRDY interrupt
++ * disabled)
+ */
+ static void atmel_tx_chars(struct uart_port *port)
+ {
+ struct circ_buf *xmit = &port->info->xmit;
+
+- if (port->x_char) {
++ if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+- return;
+ }
+- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+- atmel_stop_tx(port);
++ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ return;
+- }
+
+ while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+@@ -345,8 +447,88 @@ static void atmel_tx_chars(struct uart_port *port)
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+- if (uart_circ_empty(xmit))
+- atmel_stop_tx(port);
++ if (!uart_circ_empty(xmit))
++ UART_PUT_IER(port, ATMEL_US_TXRDY);
++}
++
++/*
++ * receive interrupt handler.
++ */
++static void
++atmel_handle_receive(struct uart_port *port, unsigned int pending)
++{
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
-+ list_splice_init(&ep->queue, &req_list);
-+ if (ep_can_dma(ep)) {
-+ usba_dma_writel(ep, CONTROL, 0);
-+ usba_dma_writel(ep, ADDRESS, 0);
-+ usba_dma_readl(ep, STATUS);
++ if (atmel_use_dma_rx(port)) {
++ /*
++ * PDC receive. Just schedule the tasklet and let it
++ * figure out the details.
++ *
++ * TODO: We're not handling error flags correctly at
++ * the moment.
++ */
++ if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
++ UART_PUT_IDR(port, (ATMEL_US_ENDRX
++ | ATMEL_US_TIMEOUT));
++ tasklet_schedule(&atmel_port->tasklet);
++ }
++
++ if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
++ ATMEL_US_FRAME | ATMEL_US_PARE))
++ atmel_pdc_rxerr(port, pending);
+ }
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(EPT_ENABLE));
-+ usba_writel(udc, INT_ENB, (usba_readl(udc, INT_ENB)
-+ & ~USBA_BF(EPT_INT, 1 << ep->index)));
+
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ /* Interrupt receive */
++ if (pending & ATMEL_US_RXRDY)
++ atmel_rx_chars(port);
++ else if (pending & ATMEL_US_RXBRK) {
++ /*
++ * End of break detected. If it came along with a
++ * character, atmel_rx_chars will handle it.
++ */
++ UART_PUT_CR(port, ATMEL_US_RSTSTA);
++ UART_PUT_IDR(port, ATMEL_US_RXBRK);
++ atmel_port->break_active = 0;
++ }
++}
+
-+ request_complete_list(ep, &req_list, -ESHUTDOWN);
++/*
++ * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
++ */
++static void
++atmel_handle_transmit(struct uart_port *port, unsigned int pending)
++{
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
-+ return 0;
++ if (atmel_use_dma_tx(port)) {
++ /* PDC transmit */
++ if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) {
++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ tasklet_schedule(&atmel_port->tasklet);
++ }
++ } else {
++ /* Interrupt transmit */
++ if (pending & ATMEL_US_TXRDY) {
++ UART_PUT_IDR(port, ATMEL_US_TXRDY);
++ tasklet_schedule(&atmel_port->tasklet);
++ }
++ }
+}
+
-+static struct usb_request *
-+usba_ep_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
++/*
++ * status flags interrupt handler.
++ */
++static void
++atmel_handle_status(struct uart_port *port, unsigned int pending,
++ unsigned int status)
+{
-+ struct usba_request *req;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
-+ DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
-+
-+ req = kzalloc(sizeof(*req), gfp_flags);
-+ if (!req)
-+ return NULL;
++ if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
++ | ATMEL_US_CTSIC)) {
++ atmel_port->irq_status = status;
++ tasklet_schedule(&atmel_port->tasklet);
++ }
+ }
+
+ /*
+@@ -355,47 +537,255 @@ static void atmel_tx_chars(struct uart_port *port)
+ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+ {
+ struct uart_port *port = dev_id;
+- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ unsigned int status, pending, pass_counter = 0;
+
+- status = UART_GET_CSR(port);
+- pending = status & UART_GET_IMR(port);
+- while (pending) {
+- /* Interrupt receive */
+- if (pending & ATMEL_US_RXRDY)
+- atmel_rx_chars(port);
+- else if (pending & ATMEL_US_RXBRK) {
++ do {
++ status = UART_GET_CSR(port);
++ pending = status & UART_GET_IMR(port);
++ if (!pending)
++ break;
+
-+ INIT_LIST_HEAD(&req->queue);
-+ req->req.dma = DMA_ADDR_INVALID;
++ atmel_handle_receive(port, pending);
++ atmel_handle_status(port, pending, status);
++ atmel_handle_transmit(port, pending);
++ } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
+
-+ return &req->req;
++ return IRQ_HANDLED;
+}
+
-+static void
-+usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
++/*
++ * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
++ */
++static void atmel_tx_dma(struct uart_port *port)
+{
-+ struct usba_request *req = to_usba_req(_req);
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++ struct circ_buf *xmit = &port->info->xmit;
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++ int count;
++
++ xmit->tail += pdc->ofs;
++ xmit->tail &= UART_XMIT_SIZE - 1;
++
++ port->icount.tx += pdc->ofs;
++ pdc->ofs = 0;
++
++ if (!uart_circ_empty(xmit)) {
++ /* more to transmit - setup next transfer */
++
++ /* disable PDC transmit */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
++ dma_sync_single_for_device(port->dev,
++ pdc->dma_addr,
++ pdc->dma_size,
++ DMA_TO_DEVICE);
++
++ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
++ pdc->ofs = count;
++
++ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
++ UART_PUT_TCR(port, count);
++ /* re-enable PDC transmit and interrupts */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
++ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ } else {
++ /* nothing left to transmit - disable the transmitter */
+
-+ DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
++ /* disable PDC transmit */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
++ }
+
-+ kfree(req);
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(port);
+}
+
-+static void *usba_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
-+ dma_addr_t *dma, unsigned gfp_flags)
++static void atmel_rx_from_ring(struct uart_port *port)
+{
-+ void *buf;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++ struct circ_buf *ring = &atmel_port->rx_ring;
++ unsigned int flg;
++ unsigned int status;
+
-+ if (bytes < L1_CACHE_BYTES)
-+ bytes = L1_CACHE_BYTES;
++ while (ring->head != ring->tail) {
++ struct atmel_uart_char c;
+
-+ buf = kmalloc(bytes, gfp_flags);
++ /* Make sure c is loaded after head. */
++ smp_rmb();
+
-+ /*
-+ * Seems like we have to map the buffer any chance we get.
-+ * ether.c wants us to initialize the dma member of a
-+ * different request than the one receiving the buffer, so one
-+ * never knows...
-+ *
-+ * Ah, screw it. The ether driver is probably wrong, and this
-+ * is not the right place to do the mapping. The driver
-+ * shouldn't mess with our DMA mappings anyway.
-+ */
-+ *dma = DMA_ADDR_INVALID;
++ c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
+
-+ return buf;
-+}
++ ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+
-+static void usba_ep_free_buffer(struct usb_ep *_ep, void *buf,
-+ dma_addr_t dma, unsigned bytes)
-+{
-+ DBG(DBG_GADGET, "ep_free_buffer: %s, buf %p (size %u)\n",
-+ _ep->name, buf, bytes);
-+ kfree(buf);
-+}
++ port->icount.rx++;
++ status = c.status;
++ flg = TTY_NORMAL;
+
-+static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
-+ struct usba_request *req, gfp_t gfp_flags)
-+{
-+ unsigned long flags;
-+ int ret;
++ /*
++ * note that the error handling code is
++ * out of the main execution path
++ */
++ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
++ | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
++ if (status & ATMEL_US_RXBRK) {
++ /* ignore side-effect */
++ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
++
++ port->icount.brk++;
++ if (uart_handle_break(port))
++ continue;
++ }
++ if (status & ATMEL_US_PARE)
++ port->icount.parity++;
++ if (status & ATMEL_US_FRAME)
++ port->icount.frame++;
++ if (status & ATMEL_US_OVRE)
++ port->icount.overrun++;
++
++ status &= port->read_status_mask;
++
++ if (status & ATMEL_US_RXBRK)
++ flg = TTY_BREAK;
++ else if (status & ATMEL_US_PARE)
++ flg = TTY_PARITY;
++ else if (status & ATMEL_US_FRAME)
++ flg = TTY_FRAME;
++ }
+
-+ DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
-+ ep_name(ep), req->req.length, req->req.dma,
-+ req->req.zero ? 'Z' : 'z',
-+ req->req.short_not_ok ? 'S' : 's',
-+ req->req.no_interrupt ? 'I' : 'i');
+
-+ if (req->req.length > 0x10000) {
-+ /* Lengths from 0 to 65536 (inclusive) are supported */
-+ DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
-+ return -EINVAL;
++ if (uart_handle_sysrq_char(port, c.ch))
++ continue;
++
++ uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
+ }
+
-+ req->using_dma = 1;
++ /*
++ * Drop the lock here since it might end up calling
++ * uart_start(), which takes the lock.
++ */
++ spin_unlock(&port->lock);
++ tty_flip_buffer_push(port->info->tty);
++ spin_lock(&port->lock);
++}
+
-+ if (req->req.dma == DMA_ADDR_INVALID) {
-+ req->req.dma = dma_map_single(
-+ &udc->pdev->dev, req->req.buf, req->req.length,
-+ ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+ req->mapped = 1;
-+ } else {
-+ dma_sync_single_for_device(
-+ &udc->pdev->dev, req->req.dma, req->req.length,
-+ ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+ req->mapped = 0;
-+ }
++static void atmel_rx_from_dma(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++ struct tty_struct *tty = port->info->tty;
++ struct atmel_dma_buffer *pdc;
++ int rx_idx = atmel_port->pdc_rx_idx;
++ unsigned int head;
++ unsigned int tail;
++ unsigned int count;
+
-+ req->ctrl = (USBA_BF(DMA_BUF_LEN, req->req.length)
-+ | USBA_BIT(DMA_CH_EN) | USBA_BIT(DMA_END_BUF_IE)
-+ | USBA_BIT(DMA_END_TR_EN) | USBA_BIT(DMA_END_TR_IE));
++ do {
++ /* Reset the UART timeout early so that we don't miss one */
++ UART_PUT_CR(port, ATMEL_US_STTTO);
++
++ pdc = &atmel_port->pdc_rx[rx_idx];
++ head = UART_GET_RPR(port) - pdc->dma_addr;
++ tail = pdc->ofs;
++
++ /* If the PDC has switched buffers, RPR won't contain
++ * any address within the current buffer. Since head
++ * is unsigned, we just need a one-way comparison to
++ * find out.
++ *
++ * In this case, we just need to consume the entire
++ * buffer and resubmit it for DMA. This will clear the
++ * ENDRX bit as well, so that we can safely re-enable
++ * all interrupts below.
++ */
++ head = min(head, pdc->dma_size);
++
++ if (likely(head != tail)) {
++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
++ pdc->dma_size, DMA_FROM_DEVICE);
++
+ /*
+- * End of break detected. If it came along
+- * with a character, atmel_rx_chars will
+- * handle it.
++ * head will only wrap around when we recycle
++ * the DMA buffer, and when that happens, we
++ * explicitly set tail to 0. So head will
++ * always be greater than tail.
+ */
+- UART_PUT_CR(port, ATMEL_US_RSTSTA);
+- UART_PUT_IDR(port, ATMEL_US_RXBRK);
+- atmel_port->break_active = 0;
++ count = head - tail;
++
++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++
++ dma_sync_single_for_device(port->dev, pdc->dma_addr,
++ pdc->dma_size, DMA_FROM_DEVICE);
++
++ port->icount.rx += count;
++ pdc->ofs = head;
+ }
+
+- // TODO: All reads to CSR will clear these interrupts!
+- if (pending & ATMEL_US_RIIC) port->icount.rng++;
+- if (pending & ATMEL_US_DSRIC) port->icount.dsr++;
+- if (pending & ATMEL_US_DCDIC)
++ /*
++ * If the current buffer is full, we need to check if
++ * the next one contains any additional data.
++ */
++ if (head >= pdc->dma_size) {
++ pdc->ofs = 0;
++ UART_PUT_RNPR(port, pdc->dma_addr);
++ UART_PUT_RNCR(port, pdc->dma_size);
+
-+ if (ep_is_in(ep))
-+ req->ctrl |= USBA_BIT(DMA_END_BUF_EN);
++ rx_idx = !rx_idx;
++ atmel_port->pdc_rx_idx = rx_idx;
++ }
++ } while (head >= pdc->dma_size);
+
+ /*
-+ * Add this request to the queue and submit for DMA if
-+ * possible. Check if we're still alive first -- we may have
-+ * received a reset since last time we checked.
++ * Drop the lock here since it might end up calling
++ * uart_start(), which takes the lock.
+ */
-+ ret = -ESHUTDOWN;
-+ spin_lock_irqsave(&udc->lock, flags);
-+ if (ep->desc) {
-+ if (list_empty(&ep->queue))
-+ submit_request(ep, req);
-+
-+ list_add_tail(&req->queue, &ep->queue);
-+ ret = 0;
-+ }
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ spin_unlock(&port->lock);
++ tty_flip_buffer_push(tty);
++ spin_lock(&port->lock);
+
-+ return ret;
++ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+}
+
-+static int usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
-+ gfp_t gfp_flags)
++/*
++ * tasklet handling tty stuff outside the interrupt handler.
++ */
++static void atmel_tasklet_func(unsigned long data)
+{
-+ struct usba_request *req = to_usba_req(_req);
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ unsigned long flags;
-+ int ret;
++ struct uart_port *port = (struct uart_port *)data;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++ unsigned int status;
++ unsigned int status_change;
+
-+ DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ,
-+ "%s: queue req %p, len %u\n", ep_name(ep), req, _req->length);
++ /* The interrupt handler does not take the lock */
++ spin_lock(&port->lock);
+
-+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN
-+ || !ep->desc)
-+ return -ESHUTDOWN;
-+
-+ req->submitted = 0;
-+ req->using_dma = 0;
-+ req->last_transaction = 0;
++ if (atmel_use_dma_tx(port))
++ atmel_tx_dma(port);
++ else
++ atmel_tx_chars(port);
++
++ status = atmel_port->irq_status;
++ status_change = status ^ atmel_port->irq_status_prev;
++
++ if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
++ | ATMEL_US_DCD | ATMEL_US_CTS)) {
++ /* TODO: All reads to CSR will clear these interrupts! */
++ if (status_change & ATMEL_US_RI)
++ port->icount.rng++;
++ if (status_change & ATMEL_US_DSR)
++ port->icount.dsr++;
++ if (status_change & ATMEL_US_DCD)
+ uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
+- if (pending & ATMEL_US_CTSIC)
++ if (status_change & ATMEL_US_CTS)
+ uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
+- if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
+- wake_up_interruptible(&port->info->delta_msr_wait);
+
+- /* Interrupt transmit */
+- if (pending & ATMEL_US_TXRDY)
+- atmel_tx_chars(port);
++ wake_up_interruptible(&port->info->delta_msr_wait);
+
+- if (pass_counter++ > ATMEL_ISR_PASS_LIMIT)
+- break;
+-
+- status = UART_GET_CSR(port);
+- pending = status & UART_GET_IMR(port);
++ atmel_port->irq_status_prev = status;
+ }
+- return IRQ_HANDLED;
+
-+ _req->status = -EINPROGRESS;
-+ _req->actual = 0;
++ if (atmel_use_dma_rx(port))
++ atmel_rx_from_dma(port);
++ else
++ atmel_rx_from_ring(port);
+
-+ if (ep_can_dma(ep))
-+ return queue_dma(udc, ep, req, gfp_flags);
++ spin_unlock(&port->lock);
+ }
+
+ /*
+@@ -403,6 +793,8 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+ */
+ static int atmel_startup(struct uart_port *port)
+ {
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++ struct tty_struct *tty = port->info->tty;
+ int retval;
+
+ /*
+@@ -415,13 +807,64 @@ static int atmel_startup(struct uart_port *port)
+ /*
+ * Allocate the IRQ
+ */
+- retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, "atmel_serial", port);
++ retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
++ tty ? tty->name : "atmel_serial", port);
+ if (retval) {
+ printk("atmel_serial: atmel_startup - Can't get irq\n");
+ return retval;
+ }
+
+ /*
++ * Initialize DMA (if necessary)
++ */
++ if (atmel_use_dma_rx(port)) {
++ int i;
+
-+ /* May have received a reset since last time we checked */
-+ ret = -ESHUTDOWN;
-+ spin_lock_irqsave(&udc->lock, flags);
-+ if (ep->desc) {
-+ list_add_tail(&req->queue, &ep->queue);
++ for (i = 0; i < 2; i++) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
++ if (pdc->buf == NULL) {
++ if (i != 0) {
++ dma_unmap_single(port->dev,
++ atmel_port->pdc_rx[0].dma_addr,
++ PDC_BUFFER_SIZE,
++ DMA_FROM_DEVICE);
++ kfree(atmel_port->pdc_rx[0].buf);
++ }
++ free_irq(port->irq, port);
++ return -ENOMEM;
++ }
++ pdc->dma_addr = dma_map_single(port->dev,
++ pdc->buf,
++ PDC_BUFFER_SIZE,
++ DMA_FROM_DEVICE);
++ pdc->dma_size = PDC_BUFFER_SIZE;
++ pdc->ofs = 0;
++ }
+
-+ if (ep_is_in(ep)
-+ || (ep_is_control(ep)
-+ && (ep->state == DATA_STAGE_IN
-+ || ep->state == STATUS_STAGE_IN)))
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
-+ else
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(RX_BK_RDY));
-+ ret = 0;
-+ }
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ atmel_port->pdc_rx_idx = 0;
+
-+ return ret;
-+}
++ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
++ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
+
-+static void usba_update_req(struct usba_ep *ep, struct usba_request *req,
-+ u32 status)
-+{
-+ req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
-+}
++ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
++ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
++ }
++ if (atmel_use_dma_tx(port)) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++ struct circ_buf *xmit = &port->info->xmit;
++
++ pdc->buf = xmit->buf;
++ pdc->dma_addr = dma_map_single(port->dev,
++ pdc->buf,
++ UART_XMIT_SIZE,
++ DMA_TO_DEVICE);
++ pdc->dma_size = UART_XMIT_SIZE;
++ pdc->ofs = 0;
++ }
+
-+static int stop_dma(struct usba_ep *ep, u32 *pstatus)
-+{
-+ unsigned int timeout;
-+ u32 status;
++ /*
+ * If there is a specific "open" function (to register
+ * control line interrupts)
+ */
+@@ -437,9 +880,21 @@ static int atmel_startup(struct uart_port *port)
+ * Finally, enable the serial port
+ */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
++ /* enable xmit & rcvr */
++ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+
+- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
++ if (atmel_use_dma_rx(port)) {
++ /* set UART timeout */
++ UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
++ UART_PUT_CR(port, ATMEL_US_STTTO);
++
++ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++ /* enable PDC controller */
++ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
++ } else {
++ /* enable receive only */
++ UART_PUT_IER(port, ATMEL_US_RXRDY);
++ }
+
+ return 0;
+ }
+@@ -449,6 +904,38 @@ static int atmel_startup(struct uart_port *port)
+ */
+ static void atmel_shutdown(struct uart_port *port)
+ {
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++ /*
++ * Ensure everything is stopped.
++ */
++ atmel_stop_rx(port);
++ atmel_stop_tx(port);
+
+ /*
-+ * Stop the DMA controller. When writing both CH_EN
-+ * and LINK to 0, the other bits are not affected.
++ * Shut-down the DMA.
+ */
-+ usba_dma_writel(ep, CONTROL, 0);
++ if (atmel_use_dma_rx(port)) {
++ int i;
+
-+ /* Wait for the FIFO to empty */
-+ for (timeout = 40; timeout; --timeout) {
-+ status = usba_dma_readl(ep, STATUS);
-+ if (!(status & USBA_BIT(DMA_CH_EN)))
-+ break;
-+ udelay(1);
++ for (i = 0; i < 2; i++) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++ dma_unmap_single(port->dev,
++ pdc->dma_addr,
++ pdc->dma_size,
++ DMA_FROM_DEVICE);
++ kfree(pdc->buf);
++ }
+ }
++ if (atmel_use_dma_tx(port)) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+
-+ if (pstatus)
-+ *pstatus = status;
++ dma_unmap_single(port->dev,
++ pdc->dma_addr,
++ pdc->dma_size,
++ DMA_TO_DEVICE);
++ }
+
-+ if (timeout == 0) {
-+ dev_err(&ep->udc->pdev->dev,
-+ "%s: timed out waiting for DMA FIFO to empty\n",
-+ ep_name(ep));
-+ return -ETIMEDOUT;
+ /*
+ * Disable all interrupts, port and break condition.
+ */
+@@ -471,45 +958,48 @@ static void atmel_shutdown(struct uart_port *port)
+ /*
+ * Power / Clock management.
+ */
+-static void atmel_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
++static void atmel_serial_pm(struct uart_port *port, unsigned int state,
++ unsigned int oldstate)
+ {
+- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ switch (state) {
+- case 0:
+- /*
+- * Enable the peripheral clock for this serial port.
+- * This is called on uart_open() or a resume event.
+- */
+- clk_enable(atmel_port->clk);
+- break;
+- case 3:
+- /*
+- * Disable the peripheral clock for this serial port.
+- * This is called on uart_close() or a suspend event.
+- */
+- clk_disable(atmel_port->clk);
+- break;
+- default:
+- printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
++ case 0:
++ /*
++ * Enable the peripheral clock for this serial port.
++ * This is called on uart_open() or a resume event.
++ */
++ clk_enable(atmel_port->clk);
++ break;
++ case 3:
++ /*
++ * Disable the peripheral clock for this serial port.
++ * This is called on uart_close() or a suspend event.
++ */
++ clk_disable(atmel_port->clk);
++ break;
++ default:
++ printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
+ }
+ }
+
+ /*
+ * Change the port parameters
+ */
+-static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
++static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
++ struct ktermios *old)
+ {
+ unsigned long flags;
+ unsigned int mode, imr, quot, baud;
+
+ /* Get current mode register */
+- mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
++ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
++ | ATMEL_US_NBSTOP | ATMEL_US_PAR);
+
+- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+ quot = uart_get_divisor(port, baud);
+
+- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
++ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
+ quot /= 8;
+ mode |= ATMEL_US_USCLKS_MCK_DIV8;
+ }
+@@ -536,18 +1026,17 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+- if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
++ /* Mark or Space parity */
++ if (termios->c_cflag & CMSPAR) {
+ if (termios->c_cflag & PARODD)
+ mode |= ATMEL_US_PAR_MARK;
+ else
+ mode |= ATMEL_US_PAR_SPACE;
+- }
+- else if (termios->c_cflag & PARODD)
++ } else if (termios->c_cflag & PARODD)
+ mode |= ATMEL_US_PAR_ODD;
+ else
+ mode |= ATMEL_US_PAR_EVEN;
+- }
+- else
++ } else
+ mode |= ATMEL_US_PAR_NONE;
+
+ spin_lock_irqsave(&port->lock, flags);
+@@ -558,6 +1047,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= ATMEL_US_RXBRK;
+
++ if (atmel_use_dma_rx(port))
++ /* need to enable error interrupts */
++ UART_PUT_IER(port, port->read_status_mask);
++
+ /*
+ * Characters to ignore
+ */
+@@ -573,16 +1066,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= ATMEL_US_OVRE;
+ }
+-
+- // TODO: Ignore all characters if CREAD is set.
++ /* TODO: Ignore all characters if CREAD is set.*/
+
+ /* update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+- /* disable interrupts and drain transmitter */
+- imr = UART_GET_IMR(port); /* get interrupt mask */
+- UART_PUT_IDR(port, -1); /* disable all interrupts */
+- while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); }
++ /* save/disable interrupts and drain transmitter */
++ imr = UART_GET_IMR(port);
++ UART_PUT_IDR(port, -1);
++ while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
++ cpu_relax();
+
+ /* disable receiver and transmitter */
+ UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+@@ -708,7 +1201,8 @@ static struct uart_ops atmel_pops = {
+ /*
+ * Configure the port from the platform device resource info.
+ */
+-static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct platform_device *pdev)
++static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
++ struct platform_device *pdev)
+ {
+ struct uart_port *port = &atmel_port->uart;
+ struct atmel_uart_data *data = pdev->dev.platform_data;
+@@ -723,6 +1217,11 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct
+ port->mapbase = pdev->resource[0].start;
+ port->irq = pdev->resource[1].start;
+
++ tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
++ (unsigned long)port);
++
++ memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
++
+ if (data->regs)
+ /* Already mapped by setup code */
+ port->membase = data->regs;
+@@ -731,11 +1230,17 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct
+ port->membase = NULL;
+ }
+
+- if (!atmel_port->clk) { /* for console, the clock could already be configured */
++ /* for console, the clock could already be configured */
++ if (!atmel_port->clk) {
+ atmel_port->clk = clk_get(&pdev->dev, "usart");
+ clk_enable(atmel_port->clk);
+ port->uartclk = clk_get_rate(atmel_port->clk);
+ }
++
++ atmel_port->use_dma_rx = data->use_dma_rx;
++ atmel_port->use_dma_tx = data->use_dma_tx;
++ if (atmel_use_dma_tx(port))
++ port->fifosize = PDC_BUFFER_SIZE;
+ }
+
+ /*
+@@ -755,12 +1260,11 @@ void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
+ atmel_pops.set_wake = fns->set_wake;
+ }
+
+-
+ #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
+ static void atmel_console_putchar(struct uart_port *port, int ch)
+ {
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+- barrier();
++ cpu_relax();
+ UART_PUT_CHAR(port, ch);
+ }
+
+@@ -773,38 +1277,40 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
+ unsigned int status, imr;
+
+ /*
+- * First, save IMR and then disable interrupts
++ * First, save IMR and then disable interrupts
+ */
+- imr = UART_GET_IMR(port); /* get interrupt mask */
++ imr = UART_GET_IMR(port);
+ UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
+
+ uart_console_write(port, s, count, atmel_console_putchar);
+
+ /*
+- * Finally, wait for transmitter to become empty
+- * and restore IMR
++ * Finally, wait for transmitter to become empty
++ * and restore IMR
+ */
+ do {
+ status = UART_GET_CSR(port);
+ } while (!(status & ATMEL_US_TXRDY));
+- UART_PUT_IER(port, imr); /* set interrupts back the way they were */
++ /* set interrupts back the way they were */
++ UART_PUT_IER(port, imr);
+ }
+
+ /*
+- * If the port was already initialised (eg, by a boot loader), try to determine
+- * the current setup.
++ * If the port was already initialised (eg, by a boot loader),
++ * try to determine the current setup.
+ */
+-static void __init atmel_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++static void __init atmel_console_get_options(struct uart_port *port, int *baud,
++ int *parity, int *bits)
+ {
+ unsigned int mr, quot;
+
+-// TODO: CR is a write-only register
+-// unsigned int cr;
+-//
+-// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN);
+-// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) {
+-// /* ok, the port was enabled */
+-// }
++ /*
++ * If the baud rate generator isn't running, the port wasn't
++ * initialized by the boot loader.
++ */
++ quot = UART_GET_BRGR(port);
++ if (!quot)
++ return;
+
+ mr = UART_GET_MR(port) & ATMEL_US_CHRL;
+ if (mr == ATMEL_US_CHRL_8)
+@@ -824,7 +1330,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
+ * lower than one of those, as it would make us fall through
+ * to a much lower baud rate than we really want.
+ */
+- quot = UART_GET_BRGR(port);
+ *baud = port->uartclk / (16 * (quot - 1));
+ }
+
+@@ -836,10 +1341,12 @@ static int __init atmel_console_setup(struct console *co, char *options)
+ int parity = 'n';
+ int flow = 'n';
+
+- if (port->membase == 0) /* Port not initialized yet - delay setup */
++ if (port->membase == NULL) {
++ /* Port not initialized yet - delay setup */
+ return -ENODEV;
+ }
+
+- UART_PUT_IDR(port, -1); /* disable interrupts */
++ UART_PUT_IDR(port, -1);
+ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+
+@@ -871,13 +1378,16 @@ static struct console atmel_console = {
+ static int __init atmel_console_init(void)
+ {
+ if (atmel_default_console_device) {
+- add_preferred_console(ATMEL_DEVICENAME, atmel_default_console_device->id, NULL);
+- atmel_init_port(&(atmel_ports[atmel_default_console_device->id]), atmel_default_console_device);
++ add_preferred_console(ATMEL_DEVICENAME,
++ atmel_default_console_device->id, NULL);
++ atmel_init_port(&atmel_ports[atmel_default_console_device->id],
++ atmel_default_console_device);
+ register_console(&atmel_console);
+ }
+
+ return 0;
+ }
+
-+ return 0;
-+}
+ console_initcall(atmel_console_init);
+
+ /*
+@@ -885,34 +1395,48 @@ console_initcall(atmel_console_init);
+ */
+ static int __init atmel_late_console_init(void)
+ {
+- if (atmel_default_console_device && !(atmel_console.flags & CON_ENABLED))
++ if (atmel_default_console_device
++ && !(atmel_console.flags & CON_ENABLED))
+ register_console(&atmel_console);
+
+ return 0;
+ }
+
-+static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+ core_initcall(atmel_late_console_init);
+
++static inline bool atmel_is_console_port(struct uart_port *port)
+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ struct usba_request *req = to_usba_req(_req);
-+ unsigned long flags;
-+ u32 status;
++ return port->cons && port->cons->index == port->line;
++}
+
-+ DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
-+ ep_name(ep), req);
+ #else
+ #define ATMEL_CONSOLE_DEVICE NULL
+
-+ spin_lock_irqsave(&udc->lock, flags);
++static inline bool atmel_is_console_port(struct uart_port *port)
++{
++ return false;
++}
+ #endif
+
+ static struct uart_driver atmel_uart = {
+- .owner = THIS_MODULE,
+- .driver_name = "atmel_serial",
+- .dev_name = ATMEL_DEVICENAME,
+- .major = SERIAL_ATMEL_MAJOR,
+- .minor = MINOR_START,
+- .nr = ATMEL_MAX_UART,
+- .cons = ATMEL_CONSOLE_DEVICE,
++ .owner = THIS_MODULE,
++ .driver_name = "atmel_serial",
++ .dev_name = ATMEL_DEVICENAME,
++ .major = SERIAL_ATMEL_MAJOR,
++ .minor = MINOR_START,
++ .nr = ATMEL_MAX_UART,
++ .cons = ATMEL_CONSOLE_DEVICE,
+ };
+
+ #ifdef CONFIG_PM
+-static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state)
++static int atmel_serial_suspend(struct platform_device *pdev,
++ pm_message_t state)
+ {
+ struct uart_port *port = platform_get_drvdata(pdev);
+- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
++ if (device_may_wakeup(&pdev->dev)
++ && !at91_suspend_entering_slow_clock())
+ enable_irq_wake(port->irq);
+ else {
+ uart_suspend_port(&atmel_uart, port);
+@@ -925,13 +1449,12 @@ static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state
+ static int atmel_serial_resume(struct platform_device *pdev)
+ {
+ struct uart_port *port = platform_get_drvdata(pdev);
+- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_port->suspended) {
+ uart_resume_port(&atmel_uart, port);
+ atmel_port->suspended = 0;
+- }
+- else
++ } else
+ disable_irq_wake(port->irq);
+
+ return 0;
+@@ -944,15 +1467,40 @@ static int atmel_serial_resume(struct platform_device *pdev)
+ static int __devinit atmel_serial_probe(struct platform_device *pdev)
+ {
+ struct atmel_uart_port *port;
++ void *data;
+ int ret;
+
++ BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
+
-+ if (req->using_dma) {
-+ /*
-+ * If this request is currently being transferred,
-+ * stop the DMA controller and reset the FIFO.
-+ */
-+ if (ep->queue.next == &req->queue) {
-+ status = usba_dma_readl(ep, STATUS);
-+ if (status & USBA_BIT(DMA_CH_EN))
-+ stop_dma(ep, &status);
+ port = &atmel_ports[pdev->id];
+ atmel_init_port(port, pdev);
+
++ if (!atmel_use_dma_rx(&port->uart)) {
++ ret = -ENOMEM;
++ data = kmalloc(sizeof(struct atmel_uart_char)
++ * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
++ if (!data)
++ goto err_alloc_ring;
++ port->rx_ring.buf = data;
++ }
+
-+#ifdef CONFIG_DEBUG_FS
-+ ep->last_dma_status = status;
-+#endif
+ ret = uart_add_one_port(&atmel_uart, &port->uart);
+- if (!ret) {
+- device_init_wakeup(&pdev->dev, 1);
+- platform_set_drvdata(pdev, port);
++ if (ret)
++ goto err_add_port;
+
-+ usba_writel(udc, EPT_RST,
-+ 1 << ep_index(ep));
++ device_init_wakeup(&pdev->dev, 1);
++ platform_set_drvdata(pdev, port);
+
-+ usba_update_req(ep, req, status);
-+ }
-+ }
++ return 0;
+
-+ /*
-+ * Errors should stop the queue from advancing until the
-+ * completion function returns.
-+ */
-+ list_del_init(&req->queue);
-+ spin_unlock_irqrestore(&udc->lock, flags);
++err_add_port:
++ kfree(port->rx_ring.buf);
++ port->rx_ring.buf = NULL;
++err_alloc_ring:
++ if (!atmel_is_console_port(&port->uart)) {
++ clk_disable(port->clk);
++ clk_put(port->clk);
++ port->clk = NULL;
+ }
+
+ return ret;
+@@ -961,19 +1509,21 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
+ static int __devexit atmel_serial_remove(struct platform_device *pdev)
+ {
+ struct uart_port *port = platform_get_drvdata(pdev);
+- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int ret = 0;
+
+- clk_disable(atmel_port->clk);
+- clk_put(atmel_port->clk);
+-
+ device_init_wakeup(&pdev->dev, 0);
+ platform_set_drvdata(pdev, NULL);
+
+- if (port) {
+- ret = uart_remove_one_port(&atmel_uart, port);
+- kfree(port);
+- }
++ ret = uart_remove_one_port(&atmel_uart, port);
+
-+ request_complete(ep, req, -ECONNRESET);
++ tasklet_kill(&atmel_port->tasklet);
++ kfree(atmel_port->rx_ring.buf);
+
-+ /* Process the next request if any */
-+ spin_lock_irqsave(&udc->lock, flags);
-+ submit_next_request(ep);
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ /* "port" is allocated statically, so we shouldn't free it */
+
-+ return 0;
++ clk_disable(atmel_port->clk);
++ clk_put(atmel_port->clk);
+
+ return ret;
+ }
+diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
+index ff10808..293b7ca 100644
+--- a/drivers/spi/atmel_spi.c
++++ b/drivers/spi/atmel_spi.c
+@@ -51,7 +51,9 @@ struct atmel_spi {
+ u8 stopping;
+ struct list_head queue;
+ struct spi_transfer *current_transfer;
+- unsigned long remaining_bytes;
++ unsigned long current_remaining_bytes;
++ struct spi_transfer *next_transfer;
++ unsigned long next_remaining_bytes;
+
+ void *buffer;
+ dma_addr_t buffer_dma;
+@@ -121,6 +123,48 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
+ gpio_set_value(gpio, !active);
+ }
+
++static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
++ struct spi_transfer *xfer)
++{
++ return msg->transfers.prev == &xfer->transfer_list;
+}
+
-+static int usba_ep_set_halt(struct usb_ep *_ep, int value)
++static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ unsigned long flags;
-+ int ret = 0;
-+
-+ DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep_name(ep),
-+ value ? "set" : "clear");
++ return xfer->delay_usecs == 0 && !xfer->cs_change;
++}
+
-+ if (!ep->desc) {
-+ DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
-+ ep_name(ep));
-+ return -ENODEV;
++static void atmel_spi_next_xfer_data(struct spi_master *master,
++ struct spi_transfer *xfer,
++ dma_addr_t *tx_dma,
++ dma_addr_t *rx_dma,
++ u32 *plen)
++{
++ struct atmel_spi *as = spi_master_get_devdata(master);
++ u32 len = *plen;
++
++ /* use scratch buffer only when rx or tx data is unspecified */
++ if (xfer->rx_buf)
++ *rx_dma = xfer->rx_dma + xfer->len - len;
++ else {
++ *rx_dma = as->buffer_dma;
++ if (len > BUFFER_SIZE)
++ len = BUFFER_SIZE;
+ }
-+ if (ep_is_isochronous(ep)) {
-+ DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
-+ ep_name(ep));
-+ return -ENOTTY;
++ if (xfer->tx_buf)
++ *tx_dma = xfer->tx_dma + xfer->len - len;
++ else {
++ *tx_dma = as->buffer_dma;
++ if (len > BUFFER_SIZE)
++ len = BUFFER_SIZE;
++ memset(as->buffer, 0, len);
++ dma_sync_single_for_device(&as->pdev->dev,
++ as->buffer_dma, len, DMA_TO_DEVICE);
+ }
+
-+ spin_lock_irqsave(&udc->lock, flags);
++ *plen = len;
++}
+
-+ /*
-+ * We can't halt IN endpoints while there are still data to be
-+ * transferred
-+ */
-+ if (!list_empty(&ep->queue)
-+ || ((value && ep_is_in(ep)
-+ && (usba_ep_readl(ep, STA)
-+ & USBA_BF(BUSY_BANKS, -1L))))) {
-+ ret = -EAGAIN;
+ /*
+ * Submit next transfer for DMA.
+ * lock is held, spi irq is blocked
+@@ -130,53 +174,78 @@ static void atmel_spi_next_xfer(struct spi_master *master,
+ {
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ struct spi_transfer *xfer;
+- u32 len;
++ u32 len, remaining, total;
+ dma_addr_t tx_dma, rx_dma;
+
+- xfer = as->current_transfer;
+- if (!xfer || as->remaining_bytes == 0) {
+- if (xfer)
+- xfer = list_entry(xfer->transfer_list.next,
+- struct spi_transfer, transfer_list);
+- else
+- xfer = list_entry(msg->transfers.next,
+- struct spi_transfer, transfer_list);
+- as->remaining_bytes = xfer->len;
+- as->current_transfer = xfer;
+- }
++ if (!as->current_transfer)
++ xfer = list_entry(msg->transfers.next,
++ struct spi_transfer, transfer_list);
++ else if (!as->next_transfer)
++ xfer = list_entry(as->current_transfer->transfer_list.next,
++ struct spi_transfer, transfer_list);
++ else
++ xfer = NULL;
+
+- len = as->remaining_bytes;
++ if (xfer) {
++ len = xfer->len;
++ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
++ remaining = xfer->len - len;
+
+- tx_dma = xfer->tx_dma + xfer->len - len;
+- rx_dma = xfer->rx_dma + xfer->len - len;
++ spi_writel(as, RPR, rx_dma);
++ spi_writel(as, TPR, tx_dma);
+
+- /* use scratch buffer only when rx or tx data is unspecified */
+- if (!xfer->rx_buf) {
+- rx_dma = as->buffer_dma;
+- if (len > BUFFER_SIZE)
+- len = BUFFER_SIZE;
+- }
+- if (!xfer->tx_buf) {
+- tx_dma = as->buffer_dma;
+- if (len > BUFFER_SIZE)
+- len = BUFFER_SIZE;
+- memset(as->buffer, 0, len);
+- dma_sync_single_for_device(&as->pdev->dev,
+- as->buffer_dma, len, DMA_TO_DEVICE);
++ if (msg->spi->bits_per_word > 8)
++ len >>= 1;
++ spi_writel(as, RCR, len);
++ spi_writel(as, TCR, len);
++
++ dev_dbg(&msg->spi->dev,
++ " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++ xfer->rx_buf, xfer->rx_dma);
+ } else {
-+ if (value)
-+ usba_ep_writel(ep, SET_STA, USBA_BIT(FORCE_STALL));
-+ else
-+ usba_ep_writel(ep, CLR_STA, (USBA_BIT(FORCE_STALL)
-+ | USBA_BIT(TOGGLE_SEQ)));
-+ usba_ep_readl(ep, STA);
++ xfer = as->next_transfer;
++ remaining = as->next_remaining_bytes;
+ }
+
+- spi_writel(as, RPR, rx_dma);
+- spi_writel(as, TPR, tx_dma);
++ as->current_transfer = xfer;
++ as->current_remaining_bytes = remaining;
+
+- as->remaining_bytes -= len;
+- if (msg->spi->bits_per_word > 8)
+- len >>= 1;
++ if (remaining > 0)
++ len = remaining;
++ else if (!atmel_spi_xfer_is_last(msg, xfer)
++ && atmel_spi_xfer_can_be_chained(xfer)) {
++ xfer = list_entry(xfer->transfer_list.next,
++ struct spi_transfer, transfer_list);
++ len = xfer->len;
++ } else
++ xfer = NULL;
+
+- /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
+- * mechanism might help avoid the IRQ latency between transfers
+- * (and improve the nCS0 errata handling on at91rm9200 chips)
+- *
+- * We're also waiting for ENDRX before we start the next
++ as->next_transfer = xfer;
++
++ if (xfer) {
++ total = len;
++ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
++ as->next_remaining_bytes = total - len;
++
++ spi_writel(as, RNPR, rx_dma);
++ spi_writel(as, TNPR, tx_dma);
++
++ if (msg->spi->bits_per_word > 8)
++ len >>= 1;
++ spi_writel(as, RNCR, len);
++ spi_writel(as, TNCR, len);
++
++ dev_dbg(&msg->spi->dev,
++ " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++ xfer->rx_buf, xfer->rx_dma);
++ } else {
++ spi_writel(as, RNCR, 0);
++ spi_writel(as, TNCR, 0);
+ }
+
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ /* REVISIT: We're waiting for ENDRX before we start the next
+ * transfer because we need to handle some difficult timing
+ * issues otherwise. If we wait for ENDTX in one transfer and
+ * then starts waiting for ENDRX in the next, it's difficult
+@@ -186,17 +255,7 @@ static void atmel_spi_next_xfer(struct spi_master *master,
+ *
+ * It should be doable, though. Just not now...
+ */
+- spi_writel(as, TNCR, 0);
+- spi_writel(as, RNCR, 0);
+ spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+-
+- dev_dbg(&msg->spi->dev,
+- " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
+- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+- xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
+-
+- spi_writel(as, RCR, len);
+- spi_writel(as, TCR, len);
+ spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
+ }
+
+@@ -294,6 +353,7 @@ atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
+ spin_lock(&as->lock);
+
+ as->current_transfer = NULL;
++ as->next_transfer = NULL;
+
+ /* continue if needed */
+ if (list_empty(&as->queue) || as->stopping)
+@@ -377,7 +437,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
+
+ spi_writel(as, IDR, pending);
+
+- if (as->remaining_bytes == 0) {
++ if (as->current_remaining_bytes == 0) {
+ msg->actual_length += xfer->len;
+
+ if (!msg->is_dma_mapped)
+@@ -387,7 +447,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
+ if (xfer->delay_usecs)
+ udelay(xfer->delay_usecs);
+
+- if (msg->transfers.prev == &xfer->transfer_list) {
++ if (atmel_spi_xfer_is_last(msg, xfer)) {
+ /* report completed message */
+ atmel_spi_msg_done(master, as, msg, 0,
+ xfer->cs_change);
+@@ -490,9 +550,14 @@ static int atmel_spi_setup(struct spi_device *spi)
+ if (!(spi->mode & SPI_CPHA))
+ csr |= SPI_BIT(NCPHA);
+
+- /* TODO: DLYBS and DLYBCT */
+- csr |= SPI_BF(DLYBS, 10);
+- csr |= SPI_BF(DLYBCT, 10);
++ /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
++ *
++ * DLYBCT would add delays between words, slowing down transfers.
++ * It could potentially be useful to cope with DMA bottlenecks, but
++ * in those cases it's probably best to just use a lower bitrate.
++ */
++ csr |= SPI_BF(DLYBS, 0);
++ csr |= SPI_BF(DLYBCT, 0);
+
+ /* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ npcs_pin = (unsigned int)spi->controller_data;
+diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
+index 7c30cc8..5e99671 100644
+--- a/drivers/video/atmel_lcdfb.c
++++ b/drivers/video/atmel_lcdfb.c
+@@ -16,6 +16,7 @@
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/delay.h>
++#include <linux/backlight.h>
+
+ #include <asm/arch/board.h>
+ #include <asm/arch/cpu.h>
+@@ -37,7 +38,9 @@
+ #endif
+
+ #if defined(CONFIG_ARCH_AT91)
+-#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_YPAN)
+
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ struct fb_var_screeninfo *var)
+@@ -69,12 +72,113 @@ static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ }
+ #endif
+
++static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
++ | ATMEL_LCDC_POL_POSITIVE
++ | ATMEL_LCDC_ENA_PWMENABLE;
+
-+ return ret;
-+}
++#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
+
-+static int usba_ep_fifo_status(struct usb_ep *_ep)
++/* some bl->props field just changed */
++static int atmel_bl_update_status(struct backlight_device *bl)
+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+
-+ return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
-+}
++ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
++ int power = sinfo->bl_power;
++ int brightness = bl->props.brightness;
+
-+static void usba_ep_fifo_flush(struct usb_ep *_ep)
-+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
++ /* REVISIT there may be a meaningful difference between
++ * fb_blank and power ... there seem to be some cases
++ * this doesn't handle correctly.
++ */
++ if (bl->props.fb_blank != sinfo->bl_power)
++ power = bl->props.fb_blank;
++ else if (bl->props.power != sinfo->bl_power)
++ power = bl->props.power;
+
-+ usba_writel(udc, EPT_RST, 1 << ep->index);
-+}
++ if (brightness < 0 && power == FB_BLANK_UNBLANK)
++ brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
++ else if (power != FB_BLANK_UNBLANK)
++ brightness = 0;
+
-+struct usb_ep_ops usba_ep_ops = {
-+ .enable = usba_ep_enable,
-+ .disable = usba_ep_disable,
-+ .alloc_request = usba_ep_alloc_request,
-+ .free_request = usba_ep_free_request,
-+ .alloc_buffer = usba_ep_alloc_buffer,
-+ .free_buffer = usba_ep_free_buffer,
-+ .queue = usba_ep_queue,
-+ .dequeue = usba_ep_dequeue,
-+ .set_halt = usba_ep_set_halt,
-+ .fifo_status = usba_ep_fifo_status,
-+ .fifo_flush = usba_ep_fifo_flush,
-+};
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
++ brightness ? contrast_ctr : 0);
+
-+static int usba_udc_get_frame(struct usb_gadget *gadget)
-+{
-+ struct usba_udc *udc = to_usba_udc(gadget);
++ bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
+
-+ return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
++ return 0;
+}
+
-+struct usb_gadget_ops usba_udc_ops = {
-+ .get_frame = usba_udc_get_frame,
-+};
++static int atmel_bl_get_brightness(struct backlight_device *bl)
++{
++ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
+
-+#define EP(nam, type, idx, dma, isoc) \
-+{ \
-+ .ep = { \
-+ .ops = &usba_ep_ops, \
-+ .name = nam, \
-+ .maxpacket = type##_FIFO_SIZE, \
-+ }, \
-+ .udc = &the_udc, \
-+ .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
-+ .fifo_size = type##_FIFO_SIZE, \
-+ .nr_banks = type##_NR_BANKS, \
-+ .index = idx, \
-+ .can_dma = dma, \
-+ .can_isoc = isoc, \
-+}
-+
-+static struct usba_ep usba_ep[] = {
-+ EP("ep0", EP0, 0, 0, 0),
-+ EP("ep1in-bulk", BULK, 1, 1, 0),
-+ EP("ep2out-bulk", BULK, 2, 1, 0),
-+ EP("ep3in-iso", ISO, 3, 1, 1),
-+ EP("ep4out-iso", ISO, 4, 1, 1),
-+ EP("ep5in-int", INT, 5, 1, 0),
-+ EP("ep6out-int", INT, 6, 1, 0),
-+};
-+#undef EP
-+
-+static struct usb_endpoint_descriptor usba_ep0_desc = {
-+ .bLength = USB_DT_ENDPOINT_SIZE,
-+ .bDescriptorType = USB_DT_ENDPOINT,
-+ .bEndpointAddress = 0,
-+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-+ .wMaxPacketSize = __constant_cpu_to_le16(64),
-+ /* FIXME: I have no idea what to put here */
-+ .bInterval = 1,
-+};
-+
-+static void nop_release(struct device *dev)
-+{
-+
-+}
-+
-+static struct usba_udc the_udc = {
-+ .gadget = {
-+ .ops = &usba_udc_ops,
-+ .ep0 = &usba_ep[0].ep,
-+ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
-+ .is_dualspeed = 1,
-+ .name = "atmel_usba_udc",
-+ .dev = {
-+ .bus_id = "gadget",
-+ .release = nop_release,
-+ },
-+ },
++ return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
++}
+
-+ .lock = SPIN_LOCK_UNLOCKED,
++static struct backlight_ops atmel_lcdc_bl_ops = {
++ .update_status = atmel_bl_update_status,
++ .get_brightness = atmel_bl_get_brightness,
+};
+
-+/*
-+ * Called with interrupts disabled and udc->lock held.
-+ */
-+static void reset_all_endpoints(struct usba_udc *udc)
++static void init_backlight(struct atmel_lcdfb_info *sinfo)
+{
-+ struct usba_ep *ep;
-+ struct usba_request *req, *tmp_req;
++ struct backlight_device *bl;
+
-+ usba_writel(udc, EPT_RST, ~0UL);
++ sinfo->bl_power = FB_BLANK_UNBLANK;
+
-+ ep = to_usba_ep(udc->gadget.ep0);
-+ list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, -ECONNRESET);
-+ }
++ if (sinfo->backlight)
++ return;
+
-+ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-+ if (ep->desc)
-+ usba_ep_disable(&ep->ep);
++ bl = backlight_device_register("backlight", &sinfo->pdev->dev,
++ sinfo, &atmel_lcdc_bl_ops);
++ if (IS_ERR(sinfo->backlight)) {
++ dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
++ PTR_ERR(bl));
++ return;
+ }
++ sinfo->backlight = bl;
++
++ bl->props.power = FB_BLANK_UNBLANK;
++ bl->props.fb_blank = FB_BLANK_UNBLANK;
++ bl->props.max_brightness = 0xff;
++ bl->props.brightness = atmel_bl_get_brightness(bl);
+}
+
-+static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
++static void exit_backlight(struct atmel_lcdfb_info *sinfo)
+{
-+ struct usba_ep *ep;
-+
-+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-+ return to_usba_ep(udc->gadget.ep0);
-+
-+ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
-+ u8 bEndpointAddress;
-+
-+ if (!ep->desc)
-+ continue;
-+ bEndpointAddress = ep->desc->bEndpointAddress;
-+ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
-+ continue;
-+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
-+ == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
-+ return ep;
-+ }
-+
-+ return NULL;
++ if (sinfo->backlight)
++ backlight_device_unregister(sinfo->backlight);
+}
+
-+/* Called with interrupts disabled and udc->lock held */
-+static inline void set_protocol_stall(struct usba_udc *udc,
-+ struct usba_ep *ep)
++#else
++
++static void init_backlight(struct atmel_lcdfb_info *sinfo)
+{
-+ usba_ep_writel(ep, SET_STA, USBA_BIT(FORCE_STALL));
-+ ep->state = WAIT_FOR_SETUP;
++ dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
+}
+
-+static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
++static void exit_backlight(struct atmel_lcdfb_info *sinfo)
+{
-+ if (usba_ep_readl(ep, STA) & USBA_BIT(FORCE_STALL))
-+ return 1;
-+ return 0;
+}
+
-+static inline void set_address(struct usba_udc *udc, unsigned int addr)
++#endif
++
++static void init_contrast(struct atmel_lcdfb_info *sinfo)
+{
-+ u32 regval;
++ /* have some default contrast/backlight settings */
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+
-+ DBG(DBG_BUS, "setting address %u...\n", addr);
-+ regval = usba_readl(udc, CTRL);
-+ regval = USBA_BFINS(DEV_ADDR, addr, regval);
-+ usba_writel(udc, CTRL, regval);
++ if (sinfo->lcdcon_is_backlight)
++ init_backlight(sinfo);
+}
+
-+static int do_test_mode(struct usba_udc *udc)
-+{
-+ static const char test_packet_buffer[] = {
-+ /* JKJKJKJK * 9 */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ /* JJKKJJKK * 8 */
-+ 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
-+ /* JJKKJJKK * 8 */
-+ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
-+ /* JJJJJJJKKKKKKK * 8 */
-+ 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-+ /* JJJJJJJK * 8 */
-+ 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
-+ /* {JKKKKKKK * 10}, JK */
-+ 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
-+ };
-+ struct device *dev = &udc->pdev->dev;
-+ struct usba_ep *ep;
-+ int test_mode;
+
+ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+- .ypanstep = 0,
++ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+ };
+@@ -148,6 +252,8 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
+ return -ENOMEM;
+ }
+
++ memset(info->screen_base, 0, info->fix.smem_len);
+
-+ test_mode = udc->test_mode;
+ return 0;
+ }
+
+@@ -203,6 +309,26 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+ var->transp.offset = var->transp.length = 0;
+ var->xoffset = var->yoffset = 0;
+
++ /* Saturate vertical and horizontal timings at maximum values */
++ var->vsync_len = min_t(u32, var->vsync_len,
++ (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
++ var->upper_margin = min_t(u32, var->upper_margin,
++ ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
++ var->lower_margin = min_t(u32, var->lower_margin,
++ ATMEL_LCDC_VFP);
++ var->right_margin = min_t(u32, var->right_margin,
++ (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
++ var->hsync_len = min_t(u32, var->hsync_len,
++ (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
++ var->left_margin = min_t(u32, var->left_margin,
++ ATMEL_LCDC_HBP + 1);
++
++ /* Some parameters can't be zero */
++ var->vsync_len = max_t(u32, var->vsync_len, 1);
++ var->right_margin = max_t(u32, var->right_margin, 1);
++ var->hsync_len = max_t(u32, var->hsync_len, 1);
++ var->left_margin = max_t(u32, var->left_margin, 1);
+
-+ /* Start from a clean slate */
-+ reset_all_endpoints(udc);
+ switch (var->bits_per_pixel) {
+ case 1:
+ case 2:
+@@ -370,10 +496,6 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
+ /* Disable all interrupts */
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
+- /* Set contrast */
+- value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
+- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
+- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+ /* ...wait for DMA engine to become idle... */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ msleep(10);
+@@ -516,7 +638,6 @@ static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
+ struct fb_info *info = sinfo->info;
+ int ret = 0;
+
+- memset_io(info->screen_base, 0, info->fix.smem_len);
+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+
+ dev_info(info->device,
+@@ -577,6 +698,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+ sinfo->default_monspecs = pdata_sinfo->default_monspecs;
+ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
+ sinfo->guard_time = pdata_sinfo->guard_time;
++ sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
+ } else {
+ dev_err(dev, "cannot get default configuration\n");
+ goto free_info;
+@@ -645,6 +767,11 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ if (!info->screen_base)
+ goto release_intmem;
+
-+ switch (test_mode) {
-+ case 0x0100:
-+ /* Test_J */
-+ usba_writel(udc, TST, USBA_BIT(TST_J_MODE));
-+ dev_info(dev, "Entering Test_J mode...\n");
-+ break;
-+ case 0x0200:
-+ /* Test_K */
-+ usba_writel(udc, TST, USBA_BIT(TST_K_MODE));
-+ dev_info(dev, "Entering Test_K mode...\n");
-+ break;
-+ case 0x0300:
+ /*
-+ * Test_SE0_NAK: Force high-speed mode and set up ep0
-+ * for Bulk IN transfers
++ * Don't clear the framebuffer -- someone may have set
++ * up a splash image.
+ */
-+ ep = &usba_ep[0];
-+ usba_writel(udc, TST,
-+ USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
-+ usba_ep_writel(ep, CFG,
-+ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
-+ | USBA_BIT(EPT_DIR)
-+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
-+ | USBA_BF(BK_NUMBER, 1));
-+ if (!(usba_ep_readl(ep, CFG) & USBA_BIT(EPT_MAPPED))) {
-+ set_protocol_stall(udc, ep);
-+ dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
-+ } else {
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
-+ dev_info(dev, "Entering Test_SE0_NAK mode...\n");
-+ }
-+ break;
-+ case 0x0400:
-+ /* Test_Packet */
-+ ep = &usba_ep[0];
-+ usba_ep_writel(ep, CFG,
-+ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
-+ | USBA_BIT(EPT_DIR)
-+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
-+ | USBA_BF(BK_NUMBER, 1));
-+ if (!(usba_ep_readl(ep, CFG) & USBA_BIT(EPT_MAPPED))) {
-+ set_protocol_stall(udc, ep);
-+ dev_err(dev, "Test_Packet: ep0 not mapped\n");
-+ } else {
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
-+ usba_writel(udc, TST, USBA_BIT(TST_PKT_MODE));
-+ copy_to_fifo(ep->fifo, test_packet_buffer,
-+ sizeof(test_packet_buffer));
-+ usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
-+ dev_info(dev, "Entering Test_Packet mode...\n");
-+ }
-+ break;
-+ default:
-+ dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/* Avoid overly long expressions */
-+static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
-+{
-+ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
-+ return true;
-+ return false;
-+}
-+
-+static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
-+{
-+ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
-+ return true;
-+ return false;
-+}
+ } else {
+ /* alocate memory buffer */
+ ret = atmel_lcdfb_alloc_video_memory(sinfo);
+@@ -670,6 +797,9 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+ goto release_mem;
+ }
+
++ /* Initialize PWM for contrast or backlight ("off") */
++ init_contrast(sinfo);
++
+ /* interrupt */
+ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
+ if (ret) {
+@@ -721,6 +851,7 @@ free_cmap:
+ unregister_irqs:
+ free_irq(sinfo->irq_base, info);
+ unmap_mmio:
++ exit_backlight(sinfo);
+ iounmap(sinfo->mmio);
+ release_mem:
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+@@ -755,6 +886,7 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
+ if (!sinfo)
+ return 0;
+
++ exit_backlight(sinfo);
+ if (sinfo->atmel_lcdfb_power_control)
+ sinfo->atmel_lcdfb_power_control(0);
+ unregister_framebuffer(info);
+@@ -781,6 +913,9 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
+
+ static struct platform_driver atmel_lcdfb_driver = {
+ .remove = __exit_p(atmel_lcdfb_remove),
++
++// FIXME need suspend, resume
++
+ .driver = {
+ .name = "atmel_lcdfb",
+ .owner = THIS_MODULE,
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index 9609a6c..924e255 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -50,6 +50,19 @@ config BACKLIGHT_CLASS_DEVICE
+ To have support for your specific LCD panel you will have to
+ select the proper drivers which depend on this option.
+
++config BACKLIGHT_ATMEL_LCDC
++ bool "Atmel LCDC Contrast-as-Backlight control"
++ depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
++ default y if MACH_SAM9261EK || MACH_SAM9263EK
++ help
++ This provides a backlight control internal to the Atmel LCDC
++ driver. If the LCD "contrast control" on your board is wired
++ so it controls the backlight brightness, select this option to
++ export this as a PWM-based backlight control.
++
++ If in doubt, it's safe to enable this option; it doesn't kick
++ in unless the board's description says it's wired that way.
++
+ config BACKLIGHT_CORGI
+ tristate "Generic (aka Sharp Corgi) Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE
+diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
+index b87ed37..2b53d1f 100644
+--- a/drivers/video/console/Kconfig
++++ b/drivers/video/console/Kconfig
+@@ -6,7 +6,7 @@ menu "Console display driver support"
+
+ config VGA_CONSOLE
+ bool "VGA text console" if EMBEDDED || !X86
+- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN
++ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
+ default y
+ help
+ Saying Y here will allow you to use Linux in text mode through a
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index 52dff40..fbd6112 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
+
+ config AT32AP700X_WDT
+ tristate "AT32AP700x watchdog"
+- depends on CPU_AT32AP7000
++ depends on CPU_AT32AP700X
+ help
+ Watchdog timer embedded into AT32AP700x devices. This will reboot
+ your system when the timeout is reached.
+diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
+deleted file mode 100644
+index 3914d7b..0000000
+--- a/include/asm-avr32/arch-at32ap/at32ap7000.h
++++ /dev/null
+@@ -1,35 +0,0 @@
+-/*
+- * Pin definitions for AT32AP7000.
+- *
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef __ASM_ARCH_AT32AP7000_H__
+-#define __ASM_ARCH_AT32AP7000_H__
+-
+-#define GPIO_PERIPH_A 0
+-#define GPIO_PERIPH_B 1
+-
+-#define NR_GPIO_CONTROLLERS 4
+-
+-/*
+- * Pin numbers identifying specific GPIO pins on the chip. They can
+- * also be converted to IRQ numbers by passing them through
+- * gpio_to_irq().
+- */
+-#define GPIO_PIOA_BASE (0)
+-#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+-#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+-#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+-#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
+-
+-#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
+-#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
+-#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
+-#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
+-#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
+-
+-#endif /* __ASM_ARCH_AT32AP7000_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
+new file mode 100644
+index 0000000..99684d6
+--- /dev/null
++++ b/include/asm-avr32/arch-at32ap/at32ap700x.h
+@@ -0,0 +1,35 @@
++/*
++ * Pin definitions for AT32AP7000.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_ARCH_AT32AP700X_H__
++#define __ASM_ARCH_AT32AP700X_H__
+
-+static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
-+{
-+ if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
-+ return true;
-+ return false;
-+}
++#define GPIO_PERIPH_A 0
++#define GPIO_PERIPH_B 1
+
-+static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
-+ struct usb_ctrlrequest *crq)
-+{
-+ switch (crq->bRequest) {
-+ case USB_REQ_GET_STATUS: {
-+ u16 status;
++#define NR_GPIO_CONTROLLERS 4
+
-+ if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
-+ /* Self-powered, no remote wakeup */
-+ status = __constant_cpu_to_le16(1 << 0);
-+ } else if (crq->bRequestType
-+ == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
-+ status = __constant_cpu_to_le16(0);
-+ } else if (crq->bRequestType
-+ == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
-+ struct usba_ep *target;
++/*
++ * Pin numbers identifying specific GPIO pins on the chip. They can
++ * also be converted to IRQ numbers by passing them through
++ * gpio_to_irq().
++ */
++#define GPIO_PIOA_BASE (0)
++#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
++#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
++#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
++#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
++
++#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
++#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
++#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
++#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
++#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
++
++#endif /* __ASM_ARCH_AT32AP700X_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
+index d6993a6..8816b66 100644
+--- a/include/asm-avr32/arch-at32ap/board.h
++++ b/include/asm-avr32/arch-at32ap/board.h
+@@ -51,6 +51,9 @@ struct platform_device *
+ at32_add_device_ide(unsigned int id, unsigned int extint,
+ struct ide_platform_data *data);
+
++/* mask says which PWM channels to mux */
++struct platform_device *at32_add_device_pwm(u32 mask);
++
+ /* depending on what's hooked up, not all SSC pins will be used */
+ #define ATMEL_SSC_TK 0x01
+ #define ATMEL_SSC_TF 0x02
+@@ -66,7 +69,13 @@ struct platform_device *
+ at32_add_device_ssc(unsigned int id, unsigned int flags);
+
+ struct platform_device *at32_add_device_twi(unsigned int id);
+-struct platform_device *at32_add_device_mci(unsigned int id);
+
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
++struct mci_platform_data {
++ int detect_pin;
++ int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+ struct platform_device *at32_add_device_ac97c(unsigned int id);
+ struct platform_device *at32_add_device_abdac(unsigned int id);
+
+diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
+index a762f42..0dc2026 100644
+--- a/include/asm-avr32/arch-at32ap/cpu.h
++++ b/include/asm-avr32/arch-at32ap/cpu.h
+@@ -14,7 +14,7 @@
+ * Only AT32AP7000 is defined for now. We can identify the specific
+ * chip at runtime, but I'm not sure if it's really worth it.
+ */
+-#ifdef CONFIG_CPU_AT32AP7000
++#ifdef CONFIG_CPU_AT32AP700X
+ # define cpu_is_at32ap7000() (1)
+ #else
+ # define cpu_is_at32ap7000() (0)
+diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
+index ee59e40..4ec6abc 100644
+--- a/include/asm-avr32/arch-at32ap/io.h
++++ b/include/asm-avr32/arch-at32ap/io.h
+@@ -4,7 +4,7 @@
+ /* For "bizarre" halfword swapping */
+ #include <linux/byteorder/swabb.h>
+
+-#if defined(CONFIG_AP7000_32_BIT_SMC)
++#if defined(CONFIG_AP700X_32_BIT_SMC)
+ # define __swizzle_addr_b(addr) (addr ^ 3UL)
+ # define __swizzle_addr_w(addr) (addr ^ 2UL)
+ # define __swizzle_addr_l(addr) (addr)
+@@ -14,7 +14,7 @@
+ # define __mem_ioswabb(a, x) (x)
+ # define __mem_ioswabw(a, x) swab16(x)
+ # define __mem_ioswabl(a, x) swab32(x)
+-#elif defined(CONFIG_AP7000_16_BIT_SMC)
++#elif defined(CONFIG_AP700X_16_BIT_SMC)
+ # define __swizzle_addr_b(addr) (addr ^ 1UL)
+ # define __swizzle_addr_w(addr) (addr)
+ # define __swizzle_addr_l(addr) (addr)
+diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
+index b1abe6b..135e034 100644
+--- a/include/asm-avr32/arch-at32ap/portmux.h
++++ b/include/asm-avr32/arch-at32ap/portmux.h
+@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin, unsigned int periph,
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+
++#ifdef CONFIG_GPIO_DEV
+
-+ status = 0;
-+ if (is_stalled(udc, target))
-+ status |= __constant_cpu_to_le16(1);
-+ } else {
-+ goto delegate;
-+ }
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
+
-+ /* Write directly to the FIFO. No queueing is done. */
-+ if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
-+ goto stall;
-+ ep->state = DATA_STAGE_IN;
-+ __raw_writew(status, ep->fifo);
-+ usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
-+ break;
-+ }
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
+
-+ case USB_REQ_CLEAR_FEATURE: {
-+ if (crq->bRequestType == USB_RECIP_DEVICE) {
-+ if (feature_is_dev_remote_wakeup(crq)) {
-+ /* TODO: Handle REMOTE_WAKEUP */
-+ } else {
-+ /* Can't CLEAR_FEATURE TEST_MODE */
-+ goto stall;
-+ }
-+ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+ struct usba_ep *target;
-+
-+ if (!feature_is_ep_halt(crq)
-+ || crq->wLength != __constant_cpu_to_le16(0))
-+ goto stall;
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
-+
-+ usba_ep_writel(target, CLR_STA,
-+ (USBA_BIT(FORCE_STALL)
-+ | USBA_BIT(TOGGLE_SEQ)));
-+ } else {
-+ goto delegate;
-+ }
++#endif /* CONFIG_GPIO_DEV */
+
-+ send_status(udc, ep);
-+ break;
-+ }
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
+new file mode 100644
+index 0000000..56a4965
+--- /dev/null
++++ b/include/asm-avr32/dma-controller.h
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
+
-+ case USB_REQ_SET_FEATURE: {
-+ if (crq->bRequestType == USB_RECIP_DEVICE) {
-+ if (feature_is_dev_test_mode(crq)) {
-+ send_status(udc, ep);
-+ ep->state = STATUS_STAGE_TEST;
-+ udc->test_mode = le16_to_cpu(crq->wIndex);
-+ return 0;
-+ } else if (feature_is_dev_remote_wakeup(crq)) {
-+ /* TODO: Handle REMOTE_WAKEUP */
-+ } else {
-+ goto stall;
-+ }
-+ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+ struct usba_ep *target;
++#include <linux/device.h>
+
-+ if (!feature_is_ep_halt(crq)
-+ || crq->wLength != __constant_cpu_to_le16(0))
-+ goto stall;
++#define DMA_DIR_MEM_TO_MEM 0x0000
++#define DMA_DIR_MEM_TO_PERIPH 0x0001
++#define DMA_DIR_PERIPH_TO_MEM 0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
+
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
++#define DMA_WIDTH_8BIT 0
++#define DMA_WIDTH_16BIT 1
++#define DMA_WIDTH_32BIT 2
+
-+ usba_ep_writel(target, SET_STA, USBA_BIT(FORCE_STALL));
-+ } else
-+ goto delegate;
++struct dma_request {
++ struct dma_controller *dmac;
++ struct list_head list;
+
-+ send_status(udc, ep);
-+ break;
-+ }
++ unsigned short channel;
+
-+ case USB_REQ_SET_ADDRESS:
-+ if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
-+ goto delegate;
++ void (*xfer_complete)(struct dma_request *req);
++ void (*block_complete)(struct dma_request *req);
++ void (*error)(struct dma_request *req);
++};
+
-+ set_address(udc, le16_to_cpu(crq->wValue));
-+ send_status(udc, ep);
-+ ep->state = STATUS_STAGE_ADDR;
-+ break;
++struct dma_request_sg {
++ struct dma_request req;
+
-+ default:
-+delegate:
-+ return udc->driver->setup(&udc->gadget, crq);
-+ }
++ int nr_sg;
++ struct scatterlist *sg;
++ unsigned long block_size;
++ unsigned int nr_blocks;
+
-+ return 0;
++ dma_addr_t data_reg;
++ unsigned short periph_id;
+
-+stall:
-+ printk(KERN_ERR
-+ "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
-+ "halting endpoint...\n",
-+ ep_name(ep), crq->bRequestType, crq->bRequest,
-+ le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
-+ le16_to_cpu(crq->wLength));
-+ set_protocol_stall(udc, ep);
-+ return -1;
-+}
++ unsigned char direction;
++ unsigned char width;
++};
++#define to_dma_request_sg(_req) \
++ container_of(_req, struct dma_request_sg, req)
+
-+static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+ struct usba_request *req;
-+ u32 epstatus;
-+ u32 epctrl;
++struct dma_request_cyclic {
++ struct dma_request req;
+
-+restart:
-+ epstatus = usba_ep_readl(ep, STA);
-+ epctrl = usba_ep_readl(ep, CTL);
++ int periods;
++ unsigned long buffer_size;
+
-+ DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
-+ ep_name(ep), ep->state, epstatus, epctrl);
++ dma_addr_t buffer_start;
++ dma_addr_t data_reg;
+
-+ req = NULL;
-+ if (!list_empty(&ep->queue))
-+ req = list_entry(ep->queue.next,
-+ struct usba_request, queue);
++ unsigned short periph_id;
++ unsigned char direction;
++ unsigned char width;
+
-+ if ((epctrl & USBA_BIT(TX_PK_RDY))
-+ && !(epstatus & USBA_BIT(TX_PK_RDY))) {
-+ if (req->submitted)
-+ next_fifo_transaction(ep, req);
-+ else
-+ submit_request(ep, req);
++ void *dev_id;
++};
++#define to_dma_request_cyclic(_req) \
++ container_of(_req, struct dma_request_cyclic, req)
+
-+ if (req->last_transaction) {
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
-+ }
-+ goto restart;
-+ }
-+ if ((epstatus & epctrl) & USBA_BIT(TX_COMPLETE)) {
-+ usba_ep_writel(ep, CLR_STA, USBA_BIT(TX_COMPLETE));
++struct dma_request_memcpy {
++ struct dma_request req;
+
-+ switch (ep->state) {
-+ case DATA_STAGE_IN:
-+ usba_ep_writel(ep, CTL_ENB, USBA_BIT(RX_BK_RDY));
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+ ep->state = STATUS_STAGE_OUT;
-+ break;
-+ case STATUS_STAGE_ADDR:
-+ /* Activate our new address */
-+ usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
-+ | USBA_BIT(FADDR_EN)));
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
-+ case STATUS_STAGE_IN:
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, 0);
-+ submit_next_request(ep);
-+ }
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
-+ case STATUS_STAGE_TEST:
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
-+ ep->state = WAIT_FOR_SETUP;
-+ if (do_test_mode(udc))
-+ set_protocol_stall(udc, ep);
-+ break;
-+ default:
-+ printk(KERN_ERR
-+ "udc: %s: TXCOMP: Invalid endpoint state %d, "
-+ "halting endpoint...\n",
-+ ep_name(ep), ep->state);
-+ set_protocol_stall(udc, ep);
-+ break;
-+ }
++ dma_addr_t src_addr;
++ unsigned int src_width;
++ unsigned int src_stride;
+
-+ goto restart;
-+ }
-+ if ((epstatus & epctrl) & USBA_BIT(RX_BK_RDY)) {
-+ switch (ep->state) {
-+ case STATUS_STAGE_OUT:
-+ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++ dma_addr_t dst_addr;
++ unsigned int dst_width;
++ unsigned int dst_stride;
+
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, 0);
-+ }
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
++ size_t length;
+
-+ case DATA_STAGE_OUT:
-+ receive_data(ep);
-+ break;
++ unsigned short src_reverse:1;
++ unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req) \
++ container_of(_req, struct dma_request_memcpy, req)
+
-+ default:
-+ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
-+ printk(KERN_ERR
-+ "udc: %s: RXRDY: Invalid endpoint state %d, "
-+ "halting endpoint...\n",
-+ ep_name(ep), ep->state);
-+ set_protocol_stall(udc, ep);
-+ break;
-+ }
++struct dma_controller {
++ struct list_head list;
++ int id;
++ struct device *dev;
+
-+ goto restart;
-+ }
-+ if (epstatus & USBA_BIT(RX_SETUP)) {
-+ union {
-+ struct usb_ctrlrequest crq;
-+ unsigned long data[2];
-+ } crq;
-+ unsigned int pkt_len;
-+ int ret;
++ int (*alloc_channel)(struct dma_controller *dmac);
++ void (*release_channel)(struct dma_controller *dmac,
++ int channel);
++ int (*prepare_request_sg)(struct dma_controller *dmac,
++ struct dma_request_sg *req);
++ int (*prepare_request_cyclic)(struct dma_controller *dmac,
++ struct dma_request_cyclic *req);
++ int (*prepare_request_memcpy)(struct dma_controller *dmac,
++ struct dma_request_memcpy *req);
++ int (*start_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ int (*stop_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++ unsigned int channel);
++};
+
-+ if (ep->state != WAIT_FOR_SETUP) {
-+ /*
-+ * Didn't expect a SETUP packet at this
-+ * point. Clean up any pending requests (which
-+ * may be successful).
-+ */
-+ int status = -EPROTO;
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++ return dmac->alloc_channel(dmac);
++}
+
-+ /*
-+ * RXRDY and TXCOMP are dropped when SETUP
-+ * packets arrive. Just pretend we received
-+ * the status packet.
-+ */
-+ if (ep->state == STATUS_STAGE_OUT
-+ || ep->state == STATUS_STAGE_IN) {
-+ usba_ep_writel(ep, CTL_DIS,
-+ USBA_BIT(RX_BK_RDY));
-+ status = 0;
-+ }
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++ dmac->release_channel(dmac, chan);
++}
+
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, status);
-+ }
-+ }
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++ struct dma_request_sg *req)
++{
++ return dmac->prepare_request_sg(dmac, req);
++}
+
-+ pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
-+ DBG(DBG_HW, "Packet length: %u\n", pkt_len);
-+ if (pkt_len != sizeof(crq)) {
-+ printk(KERN_WARNING
-+ "udc: Invalid packet length %u (expected %lu)\n",
-+ pkt_len, sizeof(crq));
-+ set_protocol_stall(udc, ep);
-+ return;
-+ }
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++ struct dma_request_cyclic *req)
++{
++ return dmac->prepare_request_cyclic(dmac, req);
++}
+
-+ DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
-+ copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++ struct dma_request_memcpy *req)
++{
++ return dmac->prepare_request_memcpy(dmac, req);
++}
+
-+ /* Free up one bank in the FIFO so that we can
-+ * generate or receive a reply right away. */
-+ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_SETUP));
++static inline int
++dma_start_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->start_request(dmac, channel);
++}
+
-+ /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
-+ ep->state, crq.crq.bRequestType,
-+ crq.crq.bRequest); */
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->stop_request(dmac, channel);
++}
+
-+ if (crq.crq.bRequestType & USB_DIR_IN) {
-+ /*
-+ * The USB 2.0 spec states that "if wLength is
-+ * zero, there is no data transfer phase."
-+ * However, testusb #14 seems to actually
-+ * expect a data phase even if wLength = 0...
-+ */
-+ ep->state = DATA_STAGE_IN;
-+ } else {
-+ if (crq.crq.wLength != __constant_cpu_to_le16(0))
-+ ep->state = DATA_STAGE_OUT;
-+ else
-+ ep->state = STATUS_STAGE_IN;
-+ }
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->get_current_pos(dmac, channel);
++}
+
-+ ret = -1;
-+ if (ep->index == 0)
-+ ret = handle_ep0_setup(udc, ep, &crq.crq);
-+ else
-+ ret = udc->driver->setup(&udc->gadget, &crq.crq);
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
+
-+ DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
-+ crq.crq.bRequestType, crq.crq.bRequest,
-+ le16_to_cpu(crq.crq.wLength), ep->state, ret);
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h
+index 83e6549..9315724 100644
+--- a/include/asm-avr32/irq.h
++++ b/include/asm-avr32/irq.h
+@@ -11,4 +11,9 @@
+
+ #define irq_canonicalize(i) (i)
+
++#ifndef __ASSEMBLER__
++int nmi_enable(void);
++void nmi_disable(void);
++#endif
+
-+ if (ret < 0) {
-+ /* Let the host know that we failed */
-+ set_protocol_stall(udc, ep);
-+ }
-+ }
+ #endif /* __ASM_AVR32_IOCTLS_H */
+diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h
+index fd7e990..ca4f954 100644
+--- a/include/asm-avr32/kdebug.h
++++ b/include/asm-avr32/kdebug.h
+@@ -5,6 +5,7 @@
+ enum die_val {
+ DIE_BREAKPOINT,
+ DIE_SSTEP,
++ DIE_NMI,
+ };
+
+ #endif /* __ASM_AVR32_KDEBUG_H */
+diff --git a/include/asm-avr32/ocd.h b/include/asm-avr32/ocd.h
+index 996405e..6bef094 100644
+--- a/include/asm-avr32/ocd.h
++++ b/include/asm-avr32/ocd.h
+@@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned int reg, unsigned long value)
+ #define ocd_read(reg) __ocd_read(OCD_##reg)
+ #define ocd_write(reg, value) __ocd_write(OCD_##reg, value)
+
++struct task_struct;
++
++void ocd_enable(struct task_struct *child);
++void ocd_disable(struct task_struct *child);
++
+ #endif /* !__ASSEMBLER__ */
+
+ #endif /* __ASM_AVR32_OCD_H */
+diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
+index a52576b..4212551 100644
+--- a/include/asm-avr32/processor.h
++++ b/include/asm-avr32/processor.h
+@@ -57,11 +57,25 @@ struct avr32_cpuinfo {
+ unsigned short cpu_revision;
+ enum tlb_config tlb_config;
+ unsigned long features;
++ u32 device_id;
+
+ struct cache_info icache;
+ struct cache_info dcache;
+ };
+
++static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
++{
++ return (cpu->device_id >> 1) & 0x7f;
+}
-+
-+static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
++static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
+{
-+ struct usba_request *req;
-+ u32 epstatus;
-+ u32 epctrl;
-+
-+ epstatus = usba_ep_readl(ep, STA);
-+ epctrl = usba_ep_readl(ep, CTL);
++ return (cpu->device_id >> 12) & 0xffff;
++}
++static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
++{
++ return (cpu->device_id >> 28) & 0x0f;
++}
+
-+ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
-+ ep_name(ep), epstatus);
+ extern struct avr32_cpuinfo boot_cpu_data;
+
+ #ifdef CONFIG_SMP
+diff --git a/include/asm-avr32/ptrace.h b/include/asm-avr32/ptrace.h
+index 8c5dba5..9e2d44f 100644
+--- a/include/asm-avr32/ptrace.h
++++ b/include/asm-avr32/ptrace.h
+@@ -121,7 +121,15 @@ struct pt_regs {
+ };
+
+ #ifdef __KERNEL__
+-# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
+
-+ while ((epctrl & USBA_BIT(TX_PK_RDY))
-+ && !(epstatus & USBA_BIT(TX_PK_RDY))) {
-+ DBG(DBG_BUS, "%s: TX PK ready\n", ep_name(ep));
++#include <asm/ocd.h>
+
-+ if (list_empty(&ep->queue)) {
-+ dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
-+ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
-+ return;
-+ }
++#define arch_ptrace_attach(child) ocd_enable(child)
+
-+ req = list_entry(ep->queue.next, struct usba_request, queue);
-+
-+ if (req->using_dma) {
-+ /* Send a zero-length packet */
-+ usba_ep_writel(ep, SET_STA,
-+ USBA_BIT(TX_PK_RDY));
-+ usba_ep_writel(ep, CTL_DIS,
-+ USBA_BIT(TX_PK_RDY));
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ } else {
-+ if (req->submitted)
-+ next_fifo_transaction(ep, req);
-+ else
-+ submit_request(ep, req);
++#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
++#define instruction_pointer(regs) ((regs)->pc)
++#define profile_pc(regs) instruction_pointer(regs)
+
-+ if (req->last_transaction) {
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ }
-+ }
+ extern void show_regs (struct pt_regs *);
+
+ static __inline__ int valid_user_regs(struct pt_regs *regs)
+@@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(struct pt_regs *regs)
+ return 0;
+ }
+
+-#define instruction_pointer(regs) ((regs)->pc)
+-
+-#define profile_pc(regs) instruction_pointer(regs)
+
+ #endif /* __KERNEL__ */
+
+diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
+index 184b574..07049f6 100644
+--- a/include/asm-avr32/thread_info.h
++++ b/include/asm-avr32/thread_info.h
+@@ -88,6 +88,7 @@ static inline struct thread_info *current_thread_info(void)
+ #define TIF_MEMDIE 6
+ #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
+ #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
++#define TIF_DEBUG 30 /* debugging enabled */
+ #define TIF_USERSPACE 31 /* true if FS sets userspace */
+
+ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+diff --git a/include/linux/atmel_pwm.h b/include/linux/atmel_pwm.h
+new file mode 100644
+index 0000000..ea04abb
+--- /dev/null
++++ b/include/linux/atmel_pwm.h
+@@ -0,0 +1,70 @@
++#ifndef __LINUX_ATMEL_PWM_H
++#define __LINUX_ATMEL_PWM_H
+
-+ epstatus = usba_ep_readl(ep, STA);
-+ epctrl = usba_ep_readl(ep, CTL);
-+ }
-+ if ((epstatus & epctrl) & USBA_BIT(RX_BK_RDY)) {
-+ DBG(DBG_BUS, "%s: RX data ready\n", ep_name(ep));
-+ receive_data(ep);
-+ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
-+ }
-+}
++/**
++ * struct pwm_channel - driver handle to a PWM channel
++ * @regs: base of this channel's registers
++ * @index: number of this channel (0..31)
++ * @mck: base clock rate, which can be prescaled and maybe subdivided
++ *
++ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
++ * Then they configure its clock rate (derived from MCK), alignment,
++ * polarity, and duty cycle by writing directly to the channel registers,
++ * before enabling the channel by calling pwm_channel_enable().
++ *
++ * After emitting a PWM signal for the desired length of time, drivers
++ * may then pwm_channel_disable() or pwm_channel_free(). Both of these
++ * disable the channel, but when it's freed the IRQ is deconfigured and
++ * the channel must later be re-allocated and reconfigured.
++ *
++ * Note that if the period or duty cycle need to be changed while the
++ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
++ * mechanism, either polling until they change or getting implicitly
++ * notified through a once-per-period interrupt handler.
++ */
++struct pwm_channel {
++ void __iomem *regs;
++ unsigned index;
++ unsigned long mck;
++};
+
-+static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+ struct usba_request *req;
-+ u32 status, control, pending;
++extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
++extern int pwm_channel_free(struct pwm_channel *ch);
+
-+ status = usba_dma_readl(ep, STATUS);
-+ control = usba_dma_readl(ep, CONTROL);
-+#ifdef CONFIG_DEBUG_FS
-+ ep->last_dma_status = status;
-+#endif
-+ pending = status & control;
-+ DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n",
-+ status, control);
++extern int pwm_clk_alloc(unsigned prescale, unsigned div);
++extern void pwm_clk_free(unsigned clk);
+
-+ if (status & USBA_BIT(DMA_CH_EN)) {
-+ dev_err(&udc->pdev->dev,
-+ "DMA_CH_EN is set after transfer is finished!\n");
-+ dev_err(&udc->pdev->dev,
-+ "status=%#08x, pending=%#08x, control=%#08x\n",
-+ status, pending, control);
++extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
+
-+ /*
-+ * try to pretend nothing happened. We might have to
-+ * do something here...
-+ */
-+ }
++#define pwm_channel_enable(ch) __pwm_channel_onoff((ch), 1)
++#define pwm_channel_disable(ch) __pwm_channel_onoff((ch), 0)
+
-+ if (list_empty(&ep->queue))
-+ /* Might happen if a reset comes along at the right moment */
-+ return;
++/* periodic interrupts, mostly for CUPD changes to period or cycle */
++extern int pwm_channel_handler(struct pwm_channel *ch,
++ void (*handler)(struct pwm_channel *ch));
+
-+ if (pending & (USBA_BIT(DMA_END_TR_ST) | USBA_BIT(DMA_END_BUF_ST))) {
-+ req = list_entry(ep->queue.next, struct usba_request, queue);
-+ usba_update_req(ep, req, status);
++/* per-channel registers (banked at pwm_channel->regs) */
++#define PWM_CMR 0x00 /* mode register */
++#define PWM_CPR_CPD (1 << 10) /* set: CUPD modifies period */
++#define PWM_CPR_CPOL (1 << 9) /* set: idle high */
++#define PWM_CPR_CALG (1 << 8) /* set: center align */
++#define PWM_CPR_CPRE (0xf << 0) /* mask: rate is mck/(2^pre) */
++#define PWM_CPR_CLKA (0xb << 0) /* rate CLKA */
++#define PWM_CPR_CLKB (0xc << 0) /* rate CLKB */
++#define PWM_CDTY 0x04 /* duty cycle (max of CPRD) */
++#define PWM_CPRD 0x08 /* period (count up from zero) */
++#define PWM_CCNT 0x0c /* counter (20 bits?) */
++#define PWM_CUPD 0x10 /* update CPRD (or CDTY) next period */
+
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ }
++static inline void
++pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
++{
++ __raw_writel(val, pwmc->regs + offset);
+}
+
-+static irqreturn_t usba_udc_irq(int irq, void *devid)
++static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
+{
-+ struct usba_udc *udc = devid;
-+ u32 status;
-+ u32 dma_status;
-+ u32 ep_status;
++ return __raw_readl(pwmc->regs + offset);
++}
+
-+ spin_lock(&udc->lock);
++#endif /* __LINUX_ATMEL_PWM_H */
+diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
+index 4eea637..336c20d 100644
+--- a/include/video/atmel_lcdc.h
++++ b/include/video/atmel_lcdc.h
+@@ -22,7 +22,7 @@
+ #ifndef __ATMEL_LCDC_H__
+ #define __ATMEL_LCDC_H__
+
+- /* LCD Controller info data structure */
++ /* LCD Controller info data structure, stored in device platform_data */
+ struct atmel_lcdfb_info {
+ spinlock_t lock;
+ struct fb_info *info;
+@@ -33,7 +33,14 @@ struct atmel_lcdfb_info {
+ struct platform_device *pdev;
+ struct clk *bus_clk;
+ struct clk *lcdc_clk;
+- unsigned int default_bpp;
++
++#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
++ struct backlight_device *backlight;
++ u8 bl_power;
++#endif
++ bool lcdcon_is_backlight;
++
++ u8 default_bpp;
+ unsigned int default_lcdcon2;
+ unsigned int default_dmacon;
+ void (*atmel_lcdfb_power_control)(int on);
+@@ -115,20 +122,20 @@ struct atmel_lcdfb_info {
+ #define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
+
+ #define ATMEL_LCDC_TIM1 0x0808
+-#define ATMEL_LCDC_VFP (0xff << 0)
++#define ATMEL_LCDC_VFP (0xffU << 0)
+ #define ATMEL_LCDC_VBP_OFFSET 8
+-#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
++#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET)
+ #define ATMEL_LCDC_VPW_OFFSET 16
+-#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
++#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET)
+ #define ATMEL_LCDC_VHDLY_OFFSET 24
+-#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
++#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET)
+
+ #define ATMEL_LCDC_TIM2 0x080c
+-#define ATMEL_LCDC_HBP (0xff << 0)
++#define ATMEL_LCDC_HBP (0xffU << 0)
+ #define ATMEL_LCDC_HPW_OFFSET 8
+-#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
++#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET)
+ #define ATMEL_LCDC_HFP_OFFSET 21
+-#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
++#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET)
+
+ #define ATMEL_LCDC_LCDFRMCFG 0x0810
+ #define ATMEL_LCDC_LINEVAL (0x7ff << 0)
+diff --git a/kernel/ptrace.c b/kernel/ptrace.c
+index c25db86..c719bb9 100644
+--- a/kernel/ptrace.c
++++ b/kernel/ptrace.c
+@@ -470,6 +470,8 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+ lock_kernel();
+ if (request == PTRACE_TRACEME) {
+ ret = ptrace_traceme();
++ if (!ret)
++ arch_ptrace_attach(current);
+ goto out;
+ }
+
+diff --git a/sound/Kconfig b/sound/Kconfig
+index b2a2db4..29a9979 100644
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
+
+ source "sound/arm/Kconfig"
+
++source "sound/avr32/Kconfig"
+
-+ status = usba_readl(udc, INT_STA);
-+ DBG(DBG_INT, "irq, status=%#08x\n", status);
+ if SPI
+ source "sound/spi/Kconfig"
+ endif
+diff --git a/sound/Makefile b/sound/Makefile
+index c76d707..a52b236 100644
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
+diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig
+new file mode 100644
+index 0000000..17d1d91
+--- /dev/null
++++ b/sound/avr32/Kconfig
+@@ -0,0 +1,11 @@
++menu "AVR32 devices"
++ depends on SND != n && AVR32
++
++config SND_ATMEL_AC97
++ tristate "Atmel AC97 Controller Driver"
++ select SND_PCM
++ select SND_AC97_CODEC
++ help
++ ALSA sound driver for the Atmel AC97 controller.
+
-+ if (status & USBA_BIT(DET_SUSPEND)) {
-+ usba_writel(udc, INT_CLR, USBA_BIT(DET_SUSPEND));
-+ DBG(DBG_BUS, "Suspend detected\n");
-+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+ && udc->driver && udc->driver->suspend)
-+ udc->driver->suspend(&udc->gadget);
-+ }
++endmenu
+diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile
+new file mode 100644
+index 0000000..5d87d0e
+--- /dev/null
++++ b/sound/avr32/Makefile
+@@ -0,0 +1,3 @@
++snd-atmel-ac97-objs := ac97c.o
++
++obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
+diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
+new file mode 100644
+index 0000000..0ec0b1c
+--- /dev/null
++++ b/sound/avr32/ac97c.c
+@@ -0,0 +1,914 @@
++/*
++ * Driver for the Atmel AC97 controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/io.h>
+
-+ if (status & USBA_BIT(WAKE_UP)) {
-+ usba_writel(udc, INT_CLR, USBA_BIT(WAKE_UP));
-+ DBG(DBG_BUS, "Wake Up CPU detected\n");
-+ }
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++#include <sound/memalloc.h>
+
-+ if (status & USBA_BIT(END_OF_RESUME)) {
-+ usba_writel(udc, INT_CLR, USBA_BIT(END_OF_RESUME));
-+ DBG(DBG_BUS, "Resume detected\n");
-+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+ && udc->driver && udc->driver->resume)
-+ udc->driver->resume(&udc->gadget);
-+ }
++#include <asm/dma-controller.h>
+
-+ dma_status = USBA_BFEXT(DMA_INT, status);
-+ if (dma_status) {
-+ int i;
++#include "ac97c.h"
+
-+ for (i = 1; i < USBA_NR_ENDPOINTS; i++)
-+ if (dma_status & (1 << i))
-+ usba_dma_irq(udc, &usba_ep[i]);
-+ }
++/* Serialize access to opened */
++static DEFINE_MUTEX(opened_mutex);
+
-+ ep_status = USBA_BFEXT(EPT_INT, status);
-+ if (ep_status) {
-+ int i;
++struct atmel_ac97_dma_info {
++ struct dma_request_cyclic req_tx;
++ struct dma_request_cyclic req_rx;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
+
-+ for (i = 0; i < USBA_NR_ENDPOINTS; i++)
-+ if (ep_status & (1 << i)) {
-+ if (ep_is_control(&usba_ep[i]))
-+ usba_control_irq(udc, &usba_ep[i]);
-+ else
-+ usba_ep_irq(udc, &usba_ep[i]);
-+ }
-+ }
++struct atmel_ac97 {
++ /* Serialize access to opened */
++ spinlock_t lock;
++ void __iomem *regs;
++ struct snd_pcm_substream *playback_substream;
++ struct snd_pcm_substream *capture_substream;
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ struct snd_ac97 *ac97;
++ struct snd_ac97_bus *ac97_bus;
++ int opened;
++ int period;
++ u64 cur_format;
++ unsigned int cur_rate;
++ struct clk *mck;
++ struct platform_device *pdev;
++ struct atmel_ac97_dma_info dma;
++};
+
-+ if (status & USBA_BIT(END_OF_RESET)) {
-+ struct usba_ep *ep0;
++#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
+
-+ usba_writel(udc, INT_CLR, USBA_BIT(END_OF_RESET));
-+ reset_all_endpoints(udc);
++#define ac97c_writel(chip, reg, val) \
++ __raw_writel((val), (chip)->regs + AC97C_##reg)
++#define ac97c_readl(chip, reg) \
++ __raw_readl((chip)->regs + AC97C_##reg)
+
-+ if (status & USBA_BIT(HIGH_SPEED)) {
-+ DBG(DBG_BUS, "High-speed bus reset detected\n");
-+ udc->gadget.speed = USB_SPEED_HIGH;
-+ } else {
-+ DBG(DBG_BUS, "Full-speed bus reset detected\n");
-+ udc->gadget.speed = USB_SPEED_FULL;
-+ }
++/*
++ * PCM part
++ */
++static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ | SNDRV_PCM_INFO_MMAP
++ | SNDRV_PCM_INFO_MMAP_VALID
++ | SNDRV_PCM_INFO_BLOCK_TRANSFER
++ | SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE
++ | SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 6,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
+
-+ ep0 = &usba_ep[0];
-+ ep0->desc = &usba_ep0_desc;
-+ ep0->state = WAIT_FOR_SETUP;
-+ usba_ep_writel(ep0, CFG,
-+ (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
-+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
-+ | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
-+ usba_ep_writel(ep0, CTL_ENB,
-+ USBA_BIT(EPT_ENABLE) | USBA_BIT(RX_SETUP));
-+ usba_writel(udc, INT_ENB, (usba_readl(udc, INT_ENB)
-+ | USBA_BF(EPT_INT, 1)
-+ | USBA_BIT(DET_SUSPEND)
-+ | USBA_BIT(END_OF_RESUME)));
++static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ | SNDRV_PCM_INFO_MMAP
++ | SNDRV_PCM_INFO_MMAP_VALID
++ | SNDRV_PCM_INFO_BLOCK_TRANSFER
++ | SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE
++ | SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 2,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
+
-+ if (!(usba_ep_readl(ep0, CFG) & USBA_BIT(EPT_MAPPED)))
-+ dev_warn(&udc->pdev->dev,
-+ "WARNING: EP0 configuration is invalid!\n");
++/*
++ * PCM functions
++ */
++static int
++snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_playback_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
+ }
-+
-+ spin_unlock(&udc->lock);
-+
-+ return IRQ_HANDLED;
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL << chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->playback_substream = substream;
++ chip->period = 0;
++ return 0;
+}
+
-+static irqreturn_t usba_vbus_irq(int irq, void *devid)
++static int
++snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
+{
-+ struct usba_udc *udc = devid;
-+ int vbus;
-+
-+ /* debounce */
-+ udelay(10);
-+
-+ spin_lock(&udc->lock);
-+ vbus = gpio_get_value(udc->vbus_pin);
-+ if (vbus != udc->vbus_prev) {
-+ if (vbus) {
-+ usba_writel(udc, CTRL, USBA_BIT(EN_USBA));
-+ usba_writel(udc, INT_ENB, USBA_BIT(END_OF_RESET));
-+ } else {
-+ udc->gadget.speed = USB_SPEED_UNKNOWN;
-+ reset_all_endpoints(udc);
-+ usba_writel(udc, CTRL, 0);
-+ if (udc->driver)
-+ udc->driver->disconnect(&udc->gadget);
-+ }
-+ udc->vbus_prev = vbus;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_capture_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
+ }
-+ spin_unlock(&udc->lock);
-+
-+ return IRQ_HANDLED;
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL << chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->capture_substream = substream;
++ chip->period = 0;
++ return 0;
+}
+
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
+{
-+ struct usba_udc *udc = &the_udc;
-+ unsigned long flags;
-+ int ret;
-+
-+ if (!udc->pdev)
-+ return -ENODEV;
-+
-+ spin_lock_irqsave(&udc->lock, flags);
-+ if (udc->driver) {
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+ return -EBUSY;
-+ }
-+
-+ udc->driver = driver;
-+ udc->gadget.dev.driver = &driver->driver;
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ clk_enable(udc->pclk);
-+ clk_enable(udc->hclk);
-+
-+ ret = driver->bind(&udc->gadget);
-+ if (ret) {
-+ DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
-+ driver->driver.name, ret);
-+ goto err_driver_bind;
-+ }
-+
-+ DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
-+
-+ udc->vbus_prev = 0;
-+ if (udc->vbus_pin != -1) {
-+ ret = request_irq(gpio_to_irq(udc->vbus_pin),
-+ usba_vbus_irq, 0, "atmel_usba_udc", udc);
-+ if (ret) {
-+ gpio_free(udc->vbus_pin);
-+ udc->vbus_pin = -1;
-+ dev_warn(&udc->pdev->dev,
-+ "failed to request vbus irq; "
-+ "assuming always on\n");
-+ }
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
+ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
+
-+ /* If Vbus is present, enable the controller and wait for reset */
-+ spin_lock_irqsave(&udc->lock, flags);
-+ if (vbus_is_present(udc) && udc->vbus_prev == 0) {
-+ usba_writel(udc, CTRL, USBA_BIT(EN_USBA));
-+ usba_writel(udc, INT_ENB, USBA_BIT(END_OF_RESET));
++static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
+ }
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
++ mutex_unlock(&opened_mutex);
+ return 0;
-+
-+err_driver_bind:
-+ udc->driver = NULL;
-+ udc->gadget.dev.driver = NULL;
-+ return ret;
+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
+
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++static int
++snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
+{
-+ struct usba_udc *udc = &the_udc;
-+ unsigned long flags;
-+
-+ if (!udc->pdev)
-+ return -ENODEV;
-+ if (driver != udc->driver)
-+ return -EINVAL;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ int err;
+
-+ if (udc->vbus_pin != -1)
-+ free_irq(gpio_to_irq(udc->vbus_pin), udc);
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
+
-+ spin_lock_irqsave(&udc->lock, flags);
-+ udc->gadget.speed = USB_SPEED_UNKNOWN;
-+ reset_all_endpoints(udc);
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
+
-+ /* This will also disable the DP pullup */
-+ usba_writel(udc, CTRL, 0);
++ return 0;
++}
+
-+ driver->unbind(&udc->gadget);
-+ udc->gadget.dev.driver = NULL;
-+ udc->driver = NULL;
++static int
++snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ int err;
+
-+ clk_disable(udc->hclk);
-+ clk_disable(udc->pclk);
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
+
-+ DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
+
+ return 0;
+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
-+static int __devinit usba_udc_probe(struct platform_device *pdev)
++static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
+{
-+ struct usba_platform_data *pdata = pdev->dev.platform_data;
-+ struct resource *regs, *fifo;
-+ struct clk *pclk, *hclk;
-+ struct usba_udc *udc = &the_udc;
-+ int irq, ret, i;
++ return snd_pcm_lib_free_pages(substream);
++}
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
-+ fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
-+ if (!regs || !fifo)
-+ return -ENXIO;
++static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
++{
+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
++ return snd_pcm_lib_free_pages(substream);
++}
+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(hclk)) {
-+ ret = PTR_ERR(hclk);
-+ goto err_get_hclk;
++static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_TO_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
+ }
++ ac97c_writel(chip, OCA, word);
+
-+ udc->pdev = pdev;
-+ udc->pclk = pclk;
-+ udc->hclk = hclk;
-+ udc->vbus_pin = -1;
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
+
-+ ret = -ENOMEM;
-+ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!udc->regs) {
-+ dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
-+ goto err_map_regs;
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
++ default:
++ word &= ~AC97C_CMR_CEM_LITTLE;
++ break;
+ }
-+ dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
-+ (unsigned long)regs->start, udc->regs);
-+ udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
-+ if (!udc->fifo) {
-+ dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
-+ goto err_map_fifo;
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
+ }
-+ dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
-+ (unsigned long)fifo->start, udc->fifo);
+
-+ device_initialize(&udc->gadget.dev);
-+ udc->gadget.dev.parent = &pdev->dev;
-+ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
+
-+ platform_set_drvdata(pdev, udc);
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
+
-+ /* Make sure we start from a clean slate */
-+ clk_enable(pclk);
-+ usba_writel(udc, CTRL, 0);
-+ clk_disable(pclk);
++ chip->dma.req_tx.buffer_size = buffer_size;
++ chip->dma.req_tx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_tx.buffer_size !=
++ (chip->dma.req_tx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
+
-+ INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
-+ usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
-+ usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
-+ usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
-+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
-+ struct usba_ep *ep = &usba_ep[i];
++ chip->dma.req_tx.buffer_start = runtime->dma_addr;
++ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
++ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
++ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.dev_id = chip;
+
-+ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
-+ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
-+ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
++ return 0;
++}
+
-+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
++static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_FROM_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
+ }
++ ac97c_writel(chip, ICA, word);
+
-+ ret = request_irq(irq, usba_udc_irq, IRQF_SAMPLE_RANDOM,
-+ "atmel_usba_udc", udc);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
-+ irq, ret);
-+ goto err_request_irq;
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ default:
++ word &= ~(AC97C_CMR_CEM_LITTLE);
++ break;
+ }
-+ udc->irq = irq;
+
-+ ret = device_add(&udc->gadget.dev);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
-+ goto err_device_add;
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~(AC97C_MR_VRA);
++ ac97c_writel(chip, MR, word);
+ }
+
-+ if (pdata && pdata->vbus_pin != GPIO_PIN_NONE)
-+ if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc"))
-+ udc->vbus_pin = pdata->vbus_pin;
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
+
-+ usba_init_debugfs(udc);
-+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+ usba_ep_init_debugfs(udc, &usba_ep[i]);
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
+
-+ return 0;
++ chip->dma.req_rx.buffer_size = buffer_size;
++ chip->dma.req_rx.periods = runtime->periods;
+
-+err_device_add:
-+ free_irq(irq, udc);
-+err_request_irq:
-+ iounmap(udc->fifo);
-+err_map_fifo:
-+ iounmap(udc->regs);
-+err_map_regs:
-+ clk_put(hclk);
-+err_get_hclk:
-+ clk_put(pclk);
++ BUG_ON(chip->dma.req_rx.buffer_size !=
++ (chip->dma.req_rx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
+
-+ platform_set_drvdata(pdev, NULL);
++ chip->dma.req_rx.buffer_start = runtime->dma_addr;
++ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
++ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
++ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.dev_id = chip;
+
-+ return ret;
++ return 0;
+}
+
-+static int __devexit usba_udc_remove(struct platform_device *pdev)
++ static int
++snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
-+ struct usba_udc *udc;
-+ int i;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
+
-+ udc = platform_get_drvdata(pdev);
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
+
-+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+ usba_ep_cleanup_debugfs(&usba_ep[i]);
-+ usba_cleanup_debugfs(udc);
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
++ &chip->dma.req_tx);
++ dma_start_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
+
-+ if (udc->vbus_pin != -1)
-+ gpio_free(udc->vbus_pin);
++ ac97c_writel(chip, CAMR, camr);
+
-+ free_irq(udc->irq, udc);
-+ iounmap(udc->fifo);
-+ iounmap(udc->regs);
-+ clk_put(udc->hclk);
-+ clk_put(udc->pclk);
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
+
-+ device_unregister(&udc->gadget.dev);
++ static int
++snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
+
-+ return 0;
-+}
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
+
-+static struct platform_driver udc_driver = {
-+ .probe = usba_udc_probe,
-+ .remove = __devexit_p(usba_udc_remove),
-+ .driver = {
-+ .name = "atmel_usba_udc",
-+ },
-+};
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
++ &chip->dma.req_rx);
++ dma_start_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ mutex_lock(&opened_mutex);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ mutex_unlock(&opened_mutex);
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
+
-+static int __init udc_init(void)
-+{
-+ return platform_driver_register(&udc_driver);
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
+}
-+module_init(udc_init);
+
-+static void __exit udc_exit(void)
++ static snd_pcm_uframes_t
++snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
+{
-+ platform_driver_unregister(&udc_driver);
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = (dma_get_current_pos
++ (chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel) - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
+}
-+module_exit(udc_exit);
+
-+MODULE_DESCRIPTION("Atmel USBA UDC driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h linux-avr32.git/drivers/usb/gadget/atmel_usba_udc.h
---- linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/usb/gadget/atmel_usba_udc.h 2007-07-12 14:00:19.000000000 +0200
-@@ -0,0 +1,402 @@
-+/*
-+ * Driver for the Atmel USBA high speed USB device controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
-+#define __LINUX_USB_GADGET_USBA_UDC_H__
-+
-+/* USB register offsets */
-+#define USBA_CTRL 0x0000
-+#define USBA_FNUM 0x0004
-+#define USBA_INT_ENB 0x0010
-+#define USBA_INT_STA 0x0014
-+#define USBA_INT_CLR 0x0018
-+#define USBA_EPT_RST 0x001c
-+#define USBA_TST_SOF_CNT 0x00d0
-+#define USBA_TST_CNT_A 0x00d4
-+#define USBA_TST_CNT_B 0x00d8
-+#define USBA_TST_MODE_REG 0x00dc
-+#define USBA_TST 0x00e0
-+
-+/* USB endpoint register offsets */
-+#define USBA_EPT_CFG 0x0000
-+#define USBA_EPT_CTL_ENB 0x0004
-+#define USBA_EPT_CTL_DIS 0x0008
-+#define USBA_EPT_CTL 0x000c
-+#define USBA_EPT_SET_STA 0x0014
-+#define USBA_EPT_CLR_STA 0x0018
-+#define USBA_EPT_STA 0x001c
-+
-+/* USB DMA register offsets */
-+#define USBA_DMA_NXT_DSC 0x0000
-+#define USBA_DMA_ADDRESS 0x0004
-+#define USBA_DMA_CONTROL 0x0008
-+#define USBA_DMA_STATUS 0x000c
++ static snd_pcm_uframes_t
++snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
+
-+/* Bitfields in CTRL */
-+#define USBA_DEV_ADDR_OFFSET 0
-+#define USBA_DEV_ADDR_SIZE 7
-+#define USBA_FADDR_EN_OFFSET 7
-+#define USBA_FADDR_EN_SIZE 1
-+#define USBA_EN_USBA_OFFSET 8
-+#define USBA_EN_USBA_SIZE 1
-+#define USBA_DETACH_OFFSET 9
-+#define USBA_DETACH_SIZE 1
-+#define USBA_REMOTE_WAKE_UP_OFFSET 10
-+#define USBA_REMOTE_WAKE_UP_SIZE 1
-+
-+/* Bitfields in FNUM */
-+#define USBA_MICRO_FRAME_NUM_OFFSET 0
-+#define USBA_MICRO_FRAME_NUM_SIZE 3
-+#define USBA_FRAME_NUMBER_OFFSET 3
-+#define USBA_FRAME_NUMBER_SIZE 11
-+#define USBA_FRAME_NUM_ERROR_OFFSET 31
-+#define USBA_FRAME_NUM_ERROR_SIZE 1
-+
-+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
-+#define USBA_HIGH_SPEED_OFFSET 0
-+#define USBA_HIGH_SPEED_SIZE 1
-+#define USBA_DET_SUSPEND_OFFSET 1
-+#define USBA_DET_SUSPEND_SIZE 1
-+#define USBA_MICRO_SOF_OFFSET 2
-+#define USBA_MICRO_SOF_SIZE 1
-+#define USBA_SOF_OFFSET 3
-+#define USBA_SOF_SIZE 1
-+#define USBA_END_OF_RESET_OFFSET 4
-+#define USBA_END_OF_RESET_SIZE 1
-+#define USBA_WAKE_UP_OFFSET 5
-+#define USBA_WAKE_UP_SIZE 1
-+#define USBA_END_OF_RESUME_OFFSET 6
-+#define USBA_END_OF_RESUME_SIZE 1
-+#define USBA_UPSTREAM_RESUME_OFFSET 7
-+#define USBA_UPSTREAM_RESUME_SIZE 1
-+#define USBA_EPT_INT_OFFSET 8
-+#define USBA_EPT_INT_SIZE 16
-+#define USBA_DMA_INT_OFFSET 24
-+#define USBA_DMA_INT_SIZE 8
-+
-+/* Bitfields in EPT_RST */
-+#define USBA_RST_OFFSET 0
-+#define USBA_RST_SIZE 16
-+
-+/* Bitfields in TST_SOF_CNT */
-+#define USBA_SOF_CNT_MAX_OFFSET 0
-+#define USBA_SOF_CNT_MAX_SIZE 7
-+#define USBA_SOF_CNT_LOAD_OFFSET 7
-+#define USBA_SOF_CNT_LOAD_SIZE 1
-+
-+/* Bitfields in TST_CNT_A */
-+#define USBA_CNT_A_MAX_OFFSET 0
-+#define USBA_CNT_A_MAX_SIZE 7
-+#define USBA_CNT_A_LOAD_OFFSET 7
-+#define USBA_CNT_A_LOAD_SIZE 1
-+
-+/* Bitfields in TST_CNT_B */
-+#define USBA_CNT_B_MAX_OFFSET 0
-+#define USBA_CNT_B_MAX_SIZE 7
-+#define USBA_CNT_B_LOAD_OFFSET 7
-+#define USBA_CNT_B_LOAD_SIZE 1
-+
-+/* Bitfields in TST_MODE_REG */
-+#define USBA_TST_MODE_OFFSET 0
-+#define USBA_TST_MODE_SIZE 6
-+
-+/* Bitfields in USBA_TST */
-+#define USBA_SPEED_CFG_OFFSET 0
-+#define USBA_SPEED_CFG_SIZE 2
-+#define USBA_TST_J_MODE_OFFSET 2
-+#define USBA_TST_J_MODE_SIZE 1
-+#define USBA_TST_K_MODE_OFFSET 3
-+#define USBA_TST_K_MODE_SIZE 1
-+#define USBA_TST_PKT_MODE_OFFSET 4
-+#define USBA_TST_PKT_MODE_SIZE 1
-+#define USBA_OPMODE2_OFFSET 5
-+#define USBA_OPMODE2_SIZE 1
-+
-+/* Bitfields in EPT_CFG */
-+#define USBA_EPT_SIZE_OFFSET 0
-+#define USBA_EPT_SIZE_SIZE 3
-+#define USBA_EPT_DIR_OFFSET 3
-+#define USBA_EPT_DIR_SIZE 1
-+#define USBA_EPT_TYPE_OFFSET 4
-+#define USBA_EPT_TYPE_SIZE 2
-+#define USBA_BK_NUMBER_OFFSET 6
-+#define USBA_BK_NUMBER_SIZE 2
-+#define USBA_NB_TRANS_OFFSET 8
-+#define USBA_NB_TRANS_SIZE 2
-+#define USBA_EPT_MAPPED_OFFSET 31
-+#define USBA_EPT_MAPPED_SIZE 1
-+
-+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
-+#define USBA_EPT_ENABLE_OFFSET 0
-+#define USBA_EPT_ENABLE_SIZE 1
-+#define USBA_AUTO_VALID_OFFSET 1
-+#define USBA_AUTO_VALID_SIZE 1
-+#define USBA_INTDIS_DMA_OFFSET 3
-+#define USBA_INTDIS_DMA_SIZE 1
-+#define USBA_NYET_DIS_OFFSET 4
-+#define USBA_NYET_DIS_SIZE 1
-+#define USBA_DATAX_RX_OFFSET 6
-+#define USBA_DATAX_RX_SIZE 1
-+#define USBA_MDATA_RX_OFFSET 7
-+#define USBA_MDATA_RX_SIZE 1
-+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
-+#define USBA_BUSY_BANK_IE_OFFSET 18
-+#define USBA_BUSY_BANK_IE_SIZE 1
-+
-+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
-+#define USBA_FORCE_STALL_OFFSET 5
-+#define USBA_FORCE_STALL_SIZE 1
-+#define USBA_TOGGLE_SEQ_OFFSET 6
-+#define USBA_TOGGLE_SEQ_SIZE 2
-+#define USBA_ERR_OVFLW_OFFSET 8
-+#define USBA_ERR_OVFLW_SIZE 1
-+#define USBA_RX_BK_RDY_OFFSET 9
-+#define USBA_RX_BK_RDY_SIZE 1
-+#define USBA_KILL_BANK_OFFSET 9
-+#define USBA_KILL_BANK_SIZE 1
-+#define USBA_TX_COMPLETE_OFFSET 10
-+#define USBA_TX_COMPLETE_SIZE 1
-+#define USBA_TX_PK_RDY_OFFSET 11
-+#define USBA_TX_PK_RDY_SIZE 1
-+#define USBA_ISO_ERR_TRANS_OFFSET 11
-+#define USBA_ISO_ERR_TRANS_SIZE 1
-+#define USBA_RX_SETUP_OFFSET 12
-+#define USBA_RX_SETUP_SIZE 1
-+#define USBA_ISO_ERR_FLOW_OFFSET 12
-+#define USBA_ISO_ERR_FLOW_SIZE 1
-+#define USBA_STALL_SENT_OFFSET 13
-+#define USBA_STALL_SENT_SIZE 1
-+#define USBA_ISO_ERR_CRC_OFFSET 13
-+#define USBA_ISO_ERR_CRC_SIZE 1
-+#define USBA_ISO_ERR_NBTRANS_OFFSET 13
-+#define USBA_ISO_ERR_NBTRANS_SIZE 1
-+#define USBA_NAK_IN_OFFSET 14
-+#define USBA_NAK_IN_SIZE 1
-+#define USBA_ISO_ERR_FLUSH_OFFSET 14
-+#define USBA_ISO_ERR_FLUSH_SIZE 1
-+#define USBA_NAK_OUT_OFFSET 15
-+#define USBA_NAK_OUT_SIZE 1
-+#define USBA_CURRENT_BANK_OFFSET 16
-+#define USBA_CURRENT_BANK_SIZE 2
-+#define USBA_BUSY_BANKS_OFFSET 18
-+#define USBA_BUSY_BANKS_SIZE 2
-+#define USBA_BYTE_COUNT_OFFSET 20
-+#define USBA_BYTE_COUNT_SIZE 11
-+#define USBA_SHORT_PACKET_OFFSET 31
-+#define USBA_SHORT_PACKET_SIZE 1
-+
-+/* Bitfields in DMA_CONTROL */
-+#define USBA_DMA_CH_EN_OFFSET 0
-+#define USBA_DMA_CH_EN_SIZE 1
-+#define USBA_DMA_LINK_OFFSET 1
-+#define USBA_DMA_LINK_SIZE 1
-+#define USBA_DMA_END_TR_EN_OFFSET 2
-+#define USBA_DMA_END_TR_EN_SIZE 1
-+#define USBA_DMA_END_BUF_EN_OFFSET 3
-+#define USBA_DMA_END_BUF_EN_SIZE 1
-+#define USBA_DMA_END_TR_IE_OFFSET 4
-+#define USBA_DMA_END_TR_IE_SIZE 1
-+#define USBA_DMA_END_BUF_IE_OFFSET 5
-+#define USBA_DMA_END_BUF_IE_SIZE 1
-+#define USBA_DMA_DESC_LOAD_IE_OFFSET 6
-+#define USBA_DMA_DESC_LOAD_IE_SIZE 1
-+#define USBA_DMA_BURST_LOCK_OFFSET 7
-+#define USBA_DMA_BURST_LOCK_SIZE 1
-+#define USBA_DMA_BUF_LEN_OFFSET 16
-+#define USBA_DMA_BUF_LEN_SIZE 16
-+
-+/* Bitfields in DMA_STATUS */
-+#define USBA_DMA_CH_ACTIVE_OFFSET 1
-+#define USBA_DMA_CH_ACTIVE_SIZE 1
-+#define USBA_DMA_END_TR_ST_OFFSET 4
-+#define USBA_DMA_END_TR_ST_SIZE 1
-+#define USBA_DMA_END_BUF_ST_OFFSET 5
-+#define USBA_DMA_END_BUF_ST_SIZE 1
-+#define USBA_DMA_DESC_LOAD_ST_OFFSET 6
-+#define USBA_DMA_DESC_LOAD_ST_SIZE 1
-+
-+/* Constants for SPEED_CFG */
-+#define USBA_SPEED_CFG_NORMAL 0
-+#define USBA_SPEED_CFG_FORCE_HIGH 2
-+#define USBA_SPEED_CFG_FORCE_FULL 3
-+
-+/* Constants for EPT_SIZE */
-+#define USBA_EPT_SIZE_8 0
-+#define USBA_EPT_SIZE_16 1
-+#define USBA_EPT_SIZE_32 2
-+#define USBA_EPT_SIZE_64 3
-+#define USBA_EPT_SIZE_128 4
-+#define USBA_EPT_SIZE_256 5
-+#define USBA_EPT_SIZE_512 6
-+#define USBA_EPT_SIZE_1024 7
-+
-+/* Constants for EPT_TYPE */
-+#define USBA_EPT_TYPE_CONTROL 0
-+#define USBA_EPT_TYPE_ISO 1
-+#define USBA_EPT_TYPE_BULK 2
-+#define USBA_EPT_TYPE_INT 3
-+
-+/* Constants for BK_NUMBER */
-+#define USBA_BK_NUMBER_ZERO 0
-+#define USBA_BK_NUMBER_ONE 1
-+#define USBA_BK_NUMBER_DOUBLE 2
-+#define USBA_BK_NUMBER_TRIPLE 3
++ bytes = (dma_get_current_pos
++ (chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel)
++ - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
+
-+/* Bit manipulation macros */
-+#define USBA_BIT(name) \
-+ (1 << USBA_##name##_OFFSET)
-+#define USBA_BF(name, value) \
-+ (((value) & ((1 << USBA_##name##_SIZE) - 1)) \
-+ << USBA_##name##_OFFSET)
-+#define USBA_BFEXT(name, value) \
-+ (((value) >> USBA_##name##_OFFSET) \
-+ & ((1 << USBA_##name##_SIZE) - 1))
-+#define USBA_BFINS(name, value, old) \
-+ (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \
-+ << USBA_##name##_OFFSET)) \
-+ | USBA_BF(name, value))
+
-+/* Register access macros */
-+#define usba_readl(udc, reg) \
-+ __raw_readl((udc)->regs + USBA_##reg)
-+#define usba_writel(udc, reg, value) \
-+ __raw_writel((value), (udc)->regs + USBA_##reg)
-+#define usba_ep_readl(ep, reg) \
-+ __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
-+#define usba_ep_writel(ep, reg, value) \
-+ __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
-+#define usba_dma_readl(ep, reg) \
-+ __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
-+#define usba_dma_writel(ep, reg, value) \
-+ __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
-+
-+/* Calculate base address for a given endpoint or DMA controller */
-+#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20)
-+#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10)
-+#define USBA_FIFO_BASE(x) ((x) << 16)
-+
-+/* Synth parameters */
-+#define USBA_NR_ENDPOINTS 7
-+
-+#define EP0_FIFO_SIZE 64
-+#define EP0_EPT_SIZE USBA_EPT_SIZE_64
-+#define EP0_NR_BANKS 1
-+#define BULK_FIFO_SIZE 512
-+#define BULK_EPT_SIZE USBA_EPT_SIZE_512
-+#define BULK_NR_BANKS 2
-+#define ISO_FIFO_SIZE 1024
-+#define ISO_EPT_SIZE USBA_EPT_SIZE_1024
-+#define ISO_NR_BANKS 3
-+#define INT_FIFO_SIZE 64
-+#define INT_EPT_SIZE USBA_EPT_SIZE_64
-+#define INT_NR_BANKS 3
-+
-+enum usba_ctrl_state {
-+ WAIT_FOR_SETUP,
-+ DATA_STAGE_IN,
-+ DATA_STAGE_OUT,
-+ STATUS_STAGE_IN,
-+ STATUS_STAGE_OUT,
-+ STATUS_STAGE_ADDR,
-+ STATUS_STAGE_TEST,
-+};
-+/*
-+ EP_STATE_IDLE,
-+ EP_STATE_SETUP,
-+ EP_STATE_IN_DATA,
-+ EP_STATE_OUT_DATA,
-+ EP_STATE_SET_ADDR_STATUS,
-+ EP_STATE_RX_STATUS,
-+ EP_STATE_TX_STATUS,
-+ EP_STATE_HALT,
-+*/
-+
-+struct usba_dma_desc {
-+ dma_addr_t next;
-+ dma_addr_t addr;
-+ u32 ctrl;
-+};
-+
-+struct usba_ep {
-+ int state;
-+ void __iomem *ep_regs;
-+ void __iomem *dma_regs;
-+ void __iomem *fifo;
-+ struct usb_ep ep;
-+ struct usba_udc *udc;
-+
-+ struct list_head queue;
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ u16 fifo_size;
-+ u8 nr_banks;
-+ u8 index;
-+ unsigned int can_dma:1;
-+ unsigned int can_isoc:1;
-+ unsigned int is_isoc:1;
-+ unsigned int is_in:1;
++ return pos;
++}
+
-+#ifdef CONFIG_DEBUG_FS
-+ u32 last_dma_status;
-+ struct dentry *debugfs_dir;
-+ struct dentry *debugfs_queue;
-+ struct dentry *debugfs_dma_status;
-+ struct dentry *debugfs_state;
-+#endif
++static struct snd_pcm_ops atmel_ac97_playback_ops = {
++ .open = snd_atmel_ac97_playback_open,
++ .close = snd_atmel_ac97_playback_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_playback_hw_params,
++ .hw_free = snd_atmel_ac97_playback_hw_free,
++ .prepare = snd_atmel_ac97_playback_prepare,
++ .trigger = snd_atmel_ac97_playback_trigger,
++ .pointer = snd_atmel_ac97_playback_pointer,
+};
+
-+struct usba_request {
-+ struct usb_request req;
-+ struct list_head queue;
-+
-+ u32 ctrl;
-+
-+ unsigned int submitted:1;
-+ unsigned int last_transaction:1;
-+ unsigned int using_dma:1;
-+ unsigned int mapped:1;
++static struct snd_pcm_ops atmel_ac97_capture_ops = {
++ .open = snd_atmel_ac97_capture_open,
++ .close = snd_atmel_ac97_capture_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_capture_hw_params,
++ .hw_free = snd_atmel_ac97_capture_hw_free,
++ .prepare = snd_atmel_ac97_capture_prepare,
++ .trigger = snd_atmel_ac97_capture_trigger,
++ .pointer = snd_atmel_ac97_capture_pointer,
+};
+
-+struct usba_udc {
-+ /* Protect hw registers from concurrent modifications */
-+ spinlock_t lock;
-+
-+ void __iomem *regs;
-+ void __iomem *fifo;
-+
-+ struct usb_gadget gadget;
-+ struct usb_gadget_driver *driver;
-+ struct platform_device *pdev;
-+ int irq;
-+ int vbus_pin;
-+ struct clk *pclk;
-+ struct clk *hclk;
-+
-+ int test_mode;
-+ int vbus_prev;
-+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+#endif
++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
++ /* Playback */
++ {
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)
++ | (1 << AC97_SLOT_PCM_CENTER)
++ | (1 << AC97_SLOT_PCM_SLEFT)
++ | (1 << AC97_SLOT_PCM_SRIGHT)
++ | (1 << AC97_SLOT_LFE)),
++ } }
++ },
++ /* PCM in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)),
++ } }
++ },
++ /* Mic in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = (1<<AC97_SLOT_MIC),
++ } }
++ },
+};
+
-+#define to_usba_ep(x) container_of((x), struct usba_ep, ep)
-+#define to_usba_req(x) container_of((x), struct usba_request, req)
-+#define to_usba_udc(x) container_of((x), struct usba_udc, gadget)
-+
-+#define ep_index(ep) ((ep)->index)
-+#define ep_can_dma(ep) ((ep)->can_dma)
-+#define ep_is_in(ep) ((ep)->is_in)
-+#define ep_is_isochronous(ep) ((ep)->is_isoc)
-+#define ep_is_control(ep) (ep_index(ep) == 0)
-+#define ep_name(ep) ((ep)->ep.name)
-+#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
-+
-+#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
-diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/ether.c linux-avr32.git/drivers/usb/gadget/ether.c
---- linux-2.6.22.1/drivers/usb/gadget/ether.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/usb/gadget/ether.c 2007-07-12 14:00:19.000000000 +0200
-@@ -277,7 +277,7 @@
- #define DEV_CONFIG_CDC
- #endif
-
--#ifdef CONFIG_USB_GADGET_HUSB2DEV
-+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- #define DEV_CONFIG_CDC
- #endif
-
-diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h linux-avr32.git/drivers/usb/gadget/gadget_chips.h
---- linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/usb/gadget/gadget_chips.h 2007-07-12 14:00:19.000000000 +0200
-@@ -75,10 +75,10 @@
- #define gadget_is_pxa27x(g) 0
- #endif
-
--#ifdef CONFIG_USB_GADGET_HUSB2DEV
--#define gadget_is_husb2dev(g) !strcmp("husb2_udc", (g)->name)
-+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-+#define gadget_is_atmel_usba(g) !strcmp("atmel_usba_udc", (g)->name)
- #else
--#define gadget_is_husb2dev(g) 0
-+#define gadget_is_atmel_usba(g) 0
- #endif
-
- #ifdef CONFIG_USB_GADGET_S3C2410
-@@ -181,7 +181,7 @@
- return 0x16;
- else if (gadget_is_mpc8272(gadget))
- return 0x17;
-- else if (gadget_is_husb2dev(gadget))
-+ else if (gadget_is_atmel_usba(gadget))
- return 0x18;
- else if (gadget_is_fsl_usb2(gadget))
- return 0x19;
-diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/inode.c linux-avr32.git/drivers/usb/gadget/inode.c
---- linux-2.6.22.1/drivers/usb/gadget/inode.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/usb/gadget/inode.c 2007-07-12 14:00:19.000000000 +0200
-@@ -37,7 +37,7 @@
- #include <linux/device.h>
- #include <linux/moduleparam.h>
-
--#include <linux/usb_gadgetfs.h>
-+#include <linux/usb/gadgetfs.h>
- #include <linux/usb_gadget.h>
-
-
-diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/Kconfig linux-avr32.git/drivers/usb/gadget/Kconfig
---- linux-2.6.22.1/drivers/usb/gadget/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/usb/gadget/Kconfig 2007-07-12 14:00:19.000000000 +0200
-@@ -175,6 +175,19 @@
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-+config USB_GADGET_ATMEL_USBA
-+ boolean "Atmel USBA"
-+ select USB_GADGET_DUALSPEED
-+ depends on AVR32
-+ help
-+ USBA is the integrated high-speed USB Device controller on
-+ the AT32AP700x processors from Atmel.
-+
-+config USB_ATMEL_USBA
-+ tristate
-+ depends on USB_GADGET_ATMEL_USBA
-+ default USB_GADGET
-+ select USB_GADGET_SELECTED
-
- config USB_GADGET_OMAP
- boolean "OMAP USB Device Controller"
-diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/Makefile linux-avr32.git/drivers/usb/gadget/Makefile
---- linux-2.6.22.1/drivers/usb/gadget/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/usb/gadget/Makefile 2007-07-12 14:00:19.000000000 +0200
-@@ -8,6 +8,7 @@
- obj-$(CONFIG_USB_OMAP) += omap_udc.o
- obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
- obj-$(CONFIG_USB_AT91) += at91_udc.o
-+obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
- obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
-
- #
-diff -x .git -Nur linux-2.6.22.1/drivers/video/atmel_lcdfb.c linux-avr32.git/drivers/video/atmel_lcdfb.c
---- linux-2.6.22.1/drivers/video/atmel_lcdfb.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/video/atmel_lcdfb.c 2007-07-12 14:00:20.000000000 +0200
-@@ -37,7 +37,9 @@
- #endif
-
- #if defined(CONFIG_ARCH_AT91)
--#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
-+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_YPAN)
-
- static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- struct fb_var_screeninfo *var)
-@@ -74,11 +76,34 @@
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .xpanstep = 0,
-- .ypanstep = 0,
-+ .ypanstep = 1,
- .ywrapstep = 0,
- .accel = FB_ACCEL_NONE,
- };
-
-+static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
++static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
+{
-+ unsigned long value;
-+
-+ if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
-+ return xres;
++ struct snd_pcm *pcm;
++ int err;
+
-+ value = xres;
-+ if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
-+ /* STN display */
-+ if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
-+ value *= 3;
-+ }
-+ if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
-+ || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
-+ && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
-+ value = DIV_ROUND_UP(value, 4);
-+ else
-+ value = DIV_ROUND_UP(value, 8);
-+ }
++ err = snd_ac97_pcm_assign(chip->ac97_bus,
++ ARRAY_SIZE(atmel_ac97_pcm_defs),
++ atmel_ac97_pcm_defs);
++ if (err)
++ return err;
+
-+ return value;
-+}
-
- static void atmel_lcdfb_update_dma(struct fb_info *info,
- struct fb_var_screeninfo *var)
-@@ -181,6 +206,7 @@
- var->xoffset = var->yoffset = 0;
-
- switch (var->bits_per_pixel) {
-+ case 1:
- case 2:
- case 4:
- case 8:
-@@ -195,8 +221,11 @@
- var->blue.offset = 10;
- var->red.length = var->green.length = var->blue.length = 5;
- break;
-- case 24:
- case 32:
-+ var->transp.offset = 24;
-+ var->transp.length = 8;
-+ /* fall through */
-+ case 24:
- var->red.offset = 0;
- var->green.offset = 8;
- var->blue.offset = 16;
-@@ -228,8 +257,10 @@
- static int atmel_lcdfb_set_par(struct fb_info *info)
- {
- struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long hozval_linesz;
- unsigned long value;
- unsigned long clk_value_khz;
-+ unsigned long bits_per_line;
-
- dev_dbg(info->device, "%s:\n", __func__);
- dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
-@@ -241,12 +272,15 @@
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
-- if (info->var.bits_per_pixel <= 8)
-+ if (info->var.bits_per_pixel == 1)
-+ info->fix.visual = FB_VISUAL_MONO01;
-+ else if (info->var.bits_per_pixel <= 8)
- info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- else
- info->fix.visual = FB_VISUAL_TRUECOLOR;
-
-- info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+ bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
-+ info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
-
- /* Re-initialize the DMA engine... */
- dev_dbg(info->device, " * update DMA engine\n");
-@@ -262,18 +296,21 @@
- /* Set pixel clock */
- clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-
-- value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
--
-- if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
-- value++;
-+ value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
-
- value = (value / 2) - 1;
-+ dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value);
-
- if (value <= 0) {
- dev_notice(info->device, "Bypassing pixel clock divider\n");
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
-- } else
-+ } else {
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+ info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
-+ dev_dbg(info->device, " updated pixclk: %lu KHz\n",
-+ PICOS2KHZ(info->var.pixclock));
-+ }
++ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
++ if (err)
++ return err;
+
-
- /* Initialize control register 2 */
- value = sinfo->default_lcdcon2;
-@@ -311,9 +348,14 @@
- dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
- lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-
-+ /* Horizontal value (aka line size) */
-+ hozval_linesz = compute_hozval(info->var.xres,
-+ lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++ &atmel_ac97_playback_ops);
+
- /* Display size */
-- value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+ value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
- value |= info->var.yres - 1;
-+ dev_dbg(info->device, " * LCDFRMCFG = %08lx\n", value);
- lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-
- /* FIFO Threshold: Use formula from data sheet */
-@@ -421,6 +463,15 @@
- ret = 0;
- }
- break;
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
++ &atmel_ac97_capture_ops);
+
-+ case FB_VISUAL_MONO01:
-+ if (regno < 2) {
-+ val = (regno == 0) ? 0x00 : 0x1F;
-+ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+ ret = 0;
-+ }
-+ break;
++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
++ &chip->pdev->dev,
++ 128 * 1024, 128 * 1024);
+
- }
-
- return ret;
-diff -x .git -Nur linux-2.6.22.1/drivers/video/backlight/Kconfig linux-avr32.git/drivers/video/backlight/Kconfig
---- linux-2.6.22.1/drivers/video/backlight/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/video/backlight/Kconfig 2007-07-12 14:00:20.000000000 +0200
-@@ -8,26 +8,44 @@
- Enable this to be able to choose the drivers for controlling the
- backlight and the LCD panel on some platforms, for example on PDAs.
-
--config BACKLIGHT_CLASS_DEVICE
-- tristate "Lowlevel Backlight controls"
-+#
-+# LCD
-+#
-+config LCD_CLASS_DEVICE
-+ tristate "Lowlevel LCD controls"
- depends on BACKLIGHT_LCD_SUPPORT
- default m
- help
-- This framework adds support for low-level control of the LCD
-- backlight. This includes support for brightness and power.
-+ This framework adds support for low-level control of LCD.
-+ Some framebuffer devices connect to platform-specific LCD modules
-+ in order to have a platform-specific way to control the flat panel
-+ (contrast and applying power to the LCD (not to the backlight!)).
-
- To have support for your specific LCD panel you will have to
- select the proper drivers which depend on this option.
-
--config LCD_CLASS_DEVICE
-- tristate "Lowlevel LCD controls"
-+config LCD_LTV350QV
-+ tristate "Samsung LTV350QV LCD Panel"
-+ depends on LCD_CLASS_DEVICE && SPI_MASTER
-+ default n
-+ help
-+ If you have a Samsung LTV350QV LCD panel, say y to include a
-+ power control driver for it. The panel starts up in power
-+ off state, so you need this driver in order to see any
-+ output.
++ pcm->private_data = chip;
++ pcm->info_flags = 0;
++ strcpy(pcm->name, "Atmel-AC97");
++ chip->pcm = pcm;
+
-+ The LTV350QV panel is present on all ATSTK1000 boards.
++ return 0;
++}
+
-+#
-+# Backlight
-+#
-+config BACKLIGHT_CLASS_DEVICE
-+ tristate "Lowlevel Backlight controls"
- depends on BACKLIGHT_LCD_SUPPORT
- default m
- help
-- This framework adds support for low-level control of LCD.
-- Some framebuffer devices connect to platform-specific LCD modules
-- in order to have a platform-specific way to control the flat panel
-- (contrast and applying power to the LCD (not to the backlight!)).
-+ This framework adds support for low-level control of the LCD
-+ backlight. This includes support for brightness and power.
-
- To have support for your specific LCD panel you will have to
- select the proper drivers which depend on this option.
-diff -x .git -Nur linux-2.6.22.1/drivers/video/backlight/ltv350qv.c linux-avr32.git/drivers/video/backlight/ltv350qv.c
---- linux-2.6.22.1/drivers/video/backlight/ltv350qv.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/video/backlight/ltv350qv.c 2007-06-06 11:34:00.000000000 +0200
-@@ -0,0 +1,340 @@
+/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * Mixer part.
+ */
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
++static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
++{
++ int err;
++ struct snd_ac97_template template;
+
-+#include "ltv350qv.h"
++ memset(&template, 0, sizeof(template));
++ template.private_data = chip;
++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
++
++ return err;
++}
+
-+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
++static void atmel_ac97_error(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ struct atmel_ac97 *chip = req->dev_id;
+
-+struct ltv350qv {
-+ struct spi_device *spi;
-+ u8 *buffer;
-+ int power;
-+ struct lcd_device *ld;
-+};
++ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
++ req->req.channel);
++}
++
++static void atmel_ac97_block_complete(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ struct atmel_ac97 *chip = req->dev_id;
++ if (req->periph_id == chip->dma.tx_periph_id)
++ snd_pcm_period_elapsed(chip->playback_substream);
++ else
++ snd_pcm_period_elapsed(chip->capture_substream);
++}
+
+/*
-+ * The power-on and power-off sequences are taken from the
-+ * LTV350QV-F04 data sheet from Samsung. The register definitions are
-+ * taken from the S6F2002 command list also from Samsung. Both
-+ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
-+ *
-+ * There's still some voodoo going on here, but it's a lot better than
-+ * in the first incarnation of the driver where all we had was the raw
-+ * numbers from the initialization sequence.
++ * Codec part.
+ */
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
++static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
++ unsigned short val)
+{
-+ struct spi_message msg;
-+ struct spi_transfer index_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+ struct spi_transfer value_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+
-+ spi_message_init(&msg);
++ struct atmel_ac97 *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
+
-+ /* register index */
-+ lcd->buffer[0] = LTV_OPC_INDEX;
-+ lcd->buffer[1] = 0x00;
-+ lcd->buffer[2] = reg & 0x7f;
-+ index_xfer.tx_buf = lcd->buffer;
-+ spi_message_add_tail(&index_xfer, &msg);
++ word = (reg & 0x7f) << 16 | val;
+
-+ /* register value */
-+ lcd->buffer[4] = LTV_OPC_DATA;
-+ lcd->buffer[5] = val >> 8;
-+ lcd->buffer[6] = val;
-+ value_xfer.tx_buf = lcd->buffer + 4;
-+ spi_message_add_tail(&value_xfer, &msg);
++ do {
++ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
++ ac97c_writel(chip, COTHR, word);
++ return;
++ }
++ udelay(1);
++ } while (--timeout);
+
-+ return spi_sync(lcd->spi, &msg);
++ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
+}
+
-+/* The comments are taken straight from the data sheet */
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
++static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
++ unsigned short reg)
+{
-+ int ret;
-+
-+ /* Power On Reset Display off State */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
-+ goto err;
-+ msleep(15);
-+
-+ /* Power Setting Function 1 */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
-+ goto err;
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
-+ goto err_power1;
-+
-+ /* Power Setting Function 2 */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5)))
-+ goto err_power2;
-+
-+ msleep(55);
-+
-+ /* Instruction Setting */
-+ ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
-+ LTV_NMD | LTV_REV | LTV_NL(0x1d));
-+ ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
-+ LTV_DS_SAME | LTV_CHS_480
-+ | LTV_DF_RGB | LTV_RGB_BGR);
-+ ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
-+ LTV_VSPL_ACTIVE_LOW
-+ | LTV_HSPL_ACTIVE_LOW
-+ | LTV_DPL_SAMPLE_RISING
-+ | LTV_EPL_ACTIVE_LOW
-+ | LTV_SS_RIGHT_TO_LEFT);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+ ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
-+ ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
-+ ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
-+ if (ret)
-+ goto err_settings;
-+
-+ /* Wait more than 2 frames */
-+ msleep(20);
-+
-+ /* Display On Sequence */
-+ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
-+ | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
-+ if (ret)
-+ goto err_disp_on;
++ struct atmel_ac97 *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
++ int write = 10;
+
-+ /* Display should now be ON. Phew. */
-+ return 0;
++ word = (0x80 | (reg & 0x7f)) << 16;
+
-+err_disp_on:
-+ /*
-+ * Try to recover. Error handling probably isn't very useful
-+ * at this point, just make a best effort to switch the panel
-+ * off.
-+ */
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+err_settings:
-+err_power2:
-+err_power1:
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+ msleep(1);
-+err:
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+ return -EIO;
-+}
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
++ ac97c_readl(chip, CORHR);
+
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
-+{
-+ int ret;
++retry_write:
++ timeout = 40;
+
-+ /* Display Off Sequence */
-+ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE
-+ | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
++ ac97c_writel(chip, COTHR, word);
++ goto read_reg;
++ }
++ mdelay(10);
++ } while (--timeout);
+
-+ /* Power down setting 1 */
-+ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
+
-+ /* Wait at least 1 ms */
-+ msleep(1);
++read_reg:
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
++ unsigned short val = ac97c_readl(chip, CORHR);
++ return val;
++ }
++ mdelay(10);
++ } while (--timeout);
+
-+ /* Power down setting 2 */
-+ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
+
-+ /*
-+ * No point in trying to recover here. If we can't switch the
-+ * panel off, what are we supposed to do other than inform the
-+ * user about the failure?
-+ */
-+ if (ret)
-+ return -EIO;
++timed_out:
++ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
++ return 0xffff;
++}
+
-+ /* Display power should now be OFF */
-+ return 0;
++static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
++{
++ ac97c_writel(chip, MR, AC97C_MR_WRST);
++ mdelay(1);
++ ac97c_writel(chip, MR, AC97C_MR_ENA);
+}
+
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
++static void snd_atmel_ac97_destroy(struct snd_card *card)
+{
-+ int ret = 0;
++ struct atmel_ac97 *chip = get_chip(card);
+
-+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_on(lcd);
-+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_off(lcd);
++ if (chip->regs)
++ iounmap(chip->regs);
+
-+ if (!ret)
-+ lcd->power = power;
++ if (chip->mck) {
++ clk_disable(chip->mck);
++ clk_put(chip->mck);
++ }
+
-+ return ret;
++ if (chip->dma.req_tx.req.dmac) {
++ dma_release_channel(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ }
++ if (chip->dma.req_rx.req.dmac) {
++ dma_release_channel(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ }
+}
+
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
++static int __devinit snd_atmel_ac97_create(struct snd_card *card,
++ struct platform_device *pdev)
+{
-+ struct ltv350qv *lcd;
++ static struct snd_ac97_bus_ops ops = {
++ .write = snd_atmel_ac97_write,
++ .read = snd_atmel_ac97_read,
++ };
++ struct atmel_ac97 *chip = get_chip(card);
++ struct resource *regs;
++ struct clk *mck;
++ int err;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ clk_enable(mck);
++ chip->mck = mck;
++
++ card->private_free = snd_atmel_ac97_destroy;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->pdev = pdev;
++
++ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!chip->regs)
++ return -ENOMEM;
++
++ snd_card_set_dev(card, &pdev->dev);
+
-+ lcd = class_get_devdata(&ld->class_dev);
-+ return ltv350qv_power(lcd, power);
++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++
++ return err;
+}
+
-+static int ltv350qv_get_power(struct lcd_device *ld)
++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
+{
-+ struct ltv350qv *lcd;
++ static int dev;
++ struct snd_card *card;
++ struct atmel_ac97 *chip;
++ int err;
++ int ch;
+
-+ lcd = class_get_devdata(&ld->class_dev);
-+ return lcd->power;
-+}
++ mutex_init(&opened_mutex);
+
-+static struct lcd_ops ltv_ops = {
-+ .get_power = ltv350qv_get_power,
-+ .set_power = ltv350qv_set_power,
-+};
++ err = -ENOMEM;
++ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
++ THIS_MODULE, sizeof(struct atmel_ac97));
++ if (!card)
++ goto out;
++ chip = get_chip(card);
+
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd;
-+ struct lcd_device *ld;
-+ int ret;
++ err = snd_atmel_ac97_create(card, pdev);
++ if (err)
++ goto out_free_card;
+
-+ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+ if (!lcd)
-+ return -ENOMEM;
++ snd_atmel_ac97_reset(chip);
+
-+ lcd->spi = spi;
-+ lcd->power = FB_BLANK_POWERDOWN;
-+ lcd->buffer = kzalloc(8, GFP_KERNEL);
++ err = snd_atmel_ac97_mixer_new(chip);
++ if (err)
++ goto out_free_card;
+
-+ ld = lcd_device_register("ltv350qv", lcd, <v_ops);
-+ if (IS_ERR(ld)) {
-+ ret = PTR_ERR(ld);
-+ goto out_free_lcd;
++ err = snd_atmel_ac97_pcm_new(chip);
++ if (err)
++ goto out_free_card;
++
++ /* TODO: Get this information from the platform device */
++ chip->dma.req_tx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_tx.req.dmac) {
++ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
++ err = -ENODEV;
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_rx.req.dmac) {
++ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
++ err = -ENODEV;
++ goto out_free_card;
+ }
-+ lcd->ld = ld;
+
-+ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+ if (ret)
-+ goto out_unregister;
++ chip->dma.rx_periph_id = 3;
++ chip->dma.tx_periph_id = 4;
+
-+ dev_set_drvdata(&spi->dev, lcd);
++ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
++ if (ch < 0) {
++ dev_dbg(&chip->pdev->dev,
++ "could not allocate TX DMA channel\n");
++ err = ch;
++ goto out_free_card;
++ }
++ chip->dma.req_tx.req.channel = ch;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_tx.req.error = atmel_ac97_error;
++
++ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
++ if (ch < 0) {
++ dev_dbg(&chip->pdev->dev,
++ "could not allocate RX DMA channel\n");
++ err = ch;
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.channel = ch;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_rx.req.error = atmel_ac97_error;
+
-+ return 0;
++ strcpy(card->driver, "atmel_ac97c");
++ strcpy(card->shortname, "atmel_ac97c");
++ sprintf(card->longname, "Atmel AVR32 AC97 controller");
+
-+out_unregister:
-+ lcd_device_unregister(ld);
-+out_free_lcd:
-+ kfree(lcd);
-+ return ret;
-+}
++ err = snd_card_register(card);
++ if (err)
++ goto out_free_card;
+
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ platform_set_drvdata(pdev, card);
++ dev++;
+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+ lcd_device_unregister(lcd->ld);
-+ kfree(lcd);
++ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
++ chip->regs);
+
+ return 0;
++
++out_free_card:
++ snd_card_free(card);
++out:
++ return err;
+}
+
+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+ pm_message_t state, u32 level)
++ static int
++snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ struct snd_card *card = platform_get_drvdata(pdev);
++ struct atmel_ac97 *chip = card->private_data;
+
-+ if (level == SUSPEND_POWER_DOWN)
-+ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ clk_disable(chip->mck);
+
+ return 0;
+}
+
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
++static int snd_atmel_ac97_resume(struct platform_device *pdev)
+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ struct snd_card *card = dev_get_drvdata(pdev);
++ struct atmel_ac97 *chip = card->private_data;
+
-+ if (level == RESUME_POWER_ON)
-+ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++ clk_enable(chip->mck);
+
+ return 0;
+}
+#else
-+#define ltv350qv_suspend NULL
-+#define ltv350qv_resume NULL
++#define snd_atmel_ac97_suspend NULL
++#define snd_atmel_ac97_resume NULL
+#endif
+
-+/* Power down all displays on reboot, poweroff or halt */
-+static void ltv350qv_shutdown(struct spi_device *spi)
++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ struct snd_card *card = platform_get_drvdata(pdev);
+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ snd_card_free(card);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
+}
+
-+static struct spi_driver ltv350qv_driver = {
-+ .driver = {
-+ .name = "ltv350qv",
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
++static struct platform_driver atmel_ac97_driver = {
++ .remove = __devexit_p(snd_atmel_ac97_remove),
++ .driver = {
++ .name = "atmel_ac97c",
+ },
-+
-+ .probe = ltv350qv_probe,
-+ .remove = __devexit_p(ltv350qv_remove),
-+ .shutdown = ltv350qv_shutdown,
-+ .suspend = ltv350qv_suspend,
-+ .resume = ltv350qv_resume,
++ .suspend = snd_atmel_ac97_suspend,
++ .resume = snd_atmel_ac97_resume,
+};
+
-+static int __init ltv350qv_init(void)
++static int __init atmel_ac97_init(void)
+{
-+ return spi_register_driver(<v350qv_driver);
++ return platform_driver_probe(&atmel_ac97_driver,
++ snd_atmel_ac97_probe);
+}
++module_init(atmel_ac97_init);
+
-+static void __exit ltv350qv_exit(void)
++static void __exit atmel_ac97_exit(void)
+{
-+ spi_unregister_driver(<v350qv_driver);
++ platform_driver_unregister(&atmel_ac97_driver);
+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
++module_exit(atmel_ac97_exit);
+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
+MODULE_LICENSE("GPL");
-diff -x .git -Nur linux-2.6.22.1/drivers/video/backlight/ltv350qv.h linux-avr32.git/drivers/video/backlight/ltv350qv.h
---- linux-2.6.22.1/drivers/video/backlight/ltv350qv.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/drivers/video/backlight/ltv350qv.h 2007-06-06 11:34:00.000000000 +0200
-@@ -0,0 +1,95 @@
++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h
+new file mode 100644
+index 0000000..96246e7
+--- /dev/null
++++ b/sound/avr32/ac97c.h
+@@ -0,0 +1,71 @@
+/*
-+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
++ * Register definitions for the Atmel AC97 Controller.
+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
++ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+#ifndef __LTV350QV_H
-+#define __LTV350QV_H
-+
-+#define LTV_OPC_INDEX 0x74
-+#define LTV_OPC_DATA 0x76
-+
-+#define LTV_ID 0x00 /* ID Read */
-+#define LTV_IFCTL 0x01 /* Display Interface Control */
-+#define LTV_DATACTL 0x02 /* Display Data Control */
-+#define LTV_ENTRY_MODE 0x03 /* Entry Mode */
-+#define LTV_GATECTL1 0x04 /* Gate Control 1 */
-+#define LTV_GATECTL2 0x05 /* Gate Control 2 */
-+#define LTV_VBP 0x06 /* Vertical Back Porch */
-+#define LTV_HBP 0x07 /* Horizontal Back Porch */
-+#define LTV_SOTCTL 0x08 /* Source Output Timing Control */
-+#define LTV_PWRCTL1 0x09 /* Power Control 1 */
-+#define LTV_PWRCTL2 0x0a /* Power Control 2 */
-+#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
-+
-+/* Bit definitions for LTV_IFCTL */
-+#define LTV_IM (1 << 15)
-+#define LTV_NMD (1 << 14)
-+#define LTV_SSMD (1 << 13)
-+#define LTV_REV (1 << 7)
-+#define LTV_NL(x) (((x) & 0x001f) << 0)
-+
-+/* Bit definitions for LTV_DATACTL */
-+#define LTV_DS_SAME (0 << 12)
-+#define LTV_DS_D_TO_S (1 << 12)
-+#define LTV_DS_S_TO_D (2 << 12)
-+#define LTV_CHS_384 (0 << 9)
-+#define LTV_CHS_480 (1 << 9)
-+#define LTV_CHS_492 (2 << 9)
-+#define LTV_DF_RGB (0 << 6)
-+#define LTV_DF_RGBX (1 << 6)
-+#define LTV_DF_XRGB (2 << 6)
-+#define LTV_RGB_RGB (0 << 2)
-+#define LTV_RGB_BGR (1 << 2)
-+#define LTV_RGB_GRB (2 << 2)
-+#define LTV_RGB_RBG (3 << 2)
-+
-+/* Bit definitions for LTV_ENTRY_MODE */
-+#define LTV_VSPL_ACTIVE_LOW (0 << 15)
-+#define LTV_VSPL_ACTIVE_HIGH (1 << 15)
-+#define LTV_HSPL_ACTIVE_LOW (0 << 14)
-+#define LTV_HSPL_ACTIVE_HIGH (1 << 14)
-+#define LTV_DPL_SAMPLE_RISING (0 << 13)
-+#define LTV_DPL_SAMPLE_FALLING (1 << 13)
-+#define LTV_EPL_ACTIVE_LOW (0 << 12)
-+#define LTV_EPL_ACTIVE_HIGH (1 << 12)
-+#define LTV_SS_LEFT_TO_RIGHT (0 << 8)
-+#define LTV_SS_RIGHT_TO_LEFT (1 << 8)
-+#define LTV_STB (1 << 1)
-+
-+/* Bit definitions for LTV_GATECTL1 */
-+#define LTV_CLW(x) (((x) & 0x0007) << 12)
-+#define LTV_GAON (1 << 5)
-+#define LTV_SDR (1 << 3)
-+
-+/* Bit definitions for LTV_GATECTL2 */
-+#define LTV_NW_INV_FRAME (0 << 14)
-+#define LTV_NW_INV_1LINE (1 << 14)
-+#define LTV_NW_INV_2LINE (2 << 14)
-+#define LTV_DSC (1 << 12)
-+#define LTV_GIF (1 << 8)
-+#define LTV_FHN (1 << 7)
-+#define LTV_FTI(x) (((x) & 0x0003) << 4)
-+#define LTV_FWI(x) (((x) & 0x0003) << 0)
-+
-+/* Bit definitions for LTV_SOTCTL */
-+#define LTV_SDT(x) (((x) & 0x0007) << 10)
-+#define LTV_EQ(x) (((x) & 0x0007) << 2)
-+
-+/* Bit definitions for LTV_PWRCTL1 */
-+#define LTV_VCOM_DISABLE (1 << 14)
-+#define LTV_VCOMOUT_ENABLE (1 << 11)
-+#define LTV_POWER_ON (1 << 9)
-+#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
-+#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
-+
-+/* Bit definitions for LTV_PWRCTL2 */
-+#define LTV_VCOML_ENABLE (1 << 13)
-+#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
-+#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
-+
-+#endif /* __LTV350QV_H */
-diff -x .git -Nur linux-2.6.22.1/drivers/video/backlight/Makefile linux-avr32.git/drivers/video/backlight/Makefile
---- linux-2.6.22.1/drivers/video/backlight/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/video/backlight/Makefile 2007-07-12 14:00:20.000000000 +0200
-@@ -1,6 +1,8 @@
- # Backlight & LCD drivers
-
- obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
-+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
-+
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
-diff -x .git -Nur linux-2.6.22.1/drivers/video/Kconfig linux-avr32.git/drivers/video/Kconfig
---- linux-2.6.22.1/drivers/video/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/drivers/video/Kconfig 2007-07-12 14:00:20.000000000 +0200
-@@ -849,6 +849,16 @@
- Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
- to let frame buffer in external SDRAM.
-
-+config FB_ATMEL_STN
-+ bool "Use a STN display with AT91/AT32 LCD Controller"
-+ depends on FB_ATMEL && ARCH_AT91SAM9261
-+ default n
-+ help
-+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
-+ Controller. Say N if you want to connect a TFT.
++#ifndef __SOUND_AVR32_AC97C_H
++#define __SOUND_AVR32_AC97C_H
++
++#define AC97C_MR 0x08
++#define AC97C_ICA 0x10
++#define AC97C_OCA 0x14
++#define AC97C_CARHR 0x20
++#define AC97C_CATHR 0x24
++#define AC97C_CASR 0x28
++#define AC97C_CAMR 0x2c
++#define AC97C_CBRHR 0x30
++#define AC97C_CBTHR 0x34
++#define AC97C_CBSR 0x38
++#define AC97C_CBMR 0x3c
++#define AC97C_CORHR 0x40
++#define AC97C_COTHR 0x44
++#define AC97C_COSR 0x48
++#define AC97C_COMR 0x4c
++#define AC97C_SR 0x50
++#define AC97C_IER 0x54
++#define AC97C_IDR 0x58
++#define AC97C_IMR 0x5c
++#define AC97C_VERSION 0xfc
++
++#define AC97C_CATPR PDC_TPR
++#define AC97C_CATCR PDC_TCR
++#define AC97C_CATNPR PDC_TNPR
++#define AC97C_CATNCR PDC_TNCR
++#define AC97C_CARPR PDC_RPR
++#define AC97C_CARCR PDC_RCR
++#define AC97C_CARNPR PDC_RNPR
++#define AC97C_CARNCR PDC_RNCR
++#define AC97C_PTCR PDC_PTCR
++
++#define AC97C_MR_ENA (1 << 0)
++#define AC97C_MR_WRST (1 << 1)
++#define AC97C_MR_VRA (1 << 2)
++
++#define AC97C_CSR_TXRDY (1 << 0)
++#define AC97C_CSR_UNRUN (1 << 2)
++#define AC97C_CSR_RXRDY (1 << 4)
++#define AC97C_CSR_ENDTX (1 << 10)
++#define AC97C_CSR_ENDRX (1 << 14)
++
++#define AC97C_CMR_SIZE_20 (0 << 16)
++#define AC97C_CMR_SIZE_18 (1 << 16)
++#define AC97C_CMR_SIZE_16 (2 << 16)
++#define AC97C_CMR_SIZE_10 (3 << 16)
++#define AC97C_CMR_CEM_LITTLE (1 << 18)
++#define AC97C_CMR_CEM_BIG (0 << 18)
++#define AC97C_CMR_CENA (1 << 21)
++#define AC97C_CMR_PDCEN (1 << 22)
++
++#define AC97C_SR_CAEVT (1 << 3)
++
++#define AC97C_CH_ASSIGN(slot, channel) \
++ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
++#define AC97C_CHANNEL_NONE 0x0
++#define AC97C_CHANNEL_A 0x1
++#define AC97C_CHANNEL_B 0x2
++
++#endif /* __SOUND_AVR32_AC97C_H */
+diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
+index 857008b..db69a17 100644
+--- a/sound/oss/Kconfig
++++ b/sound/oss/Kconfig
+@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
+ int "DAC channel"
+ default "1"
+ depends on SOUND_SH_DAC_AUDIO
++
++config SOUND_AT32_ABDAC
++ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
++ depends on SOUND_PRIME && AVR32
+diff --git a/sound/oss/Makefile b/sound/oss/Makefile
+index f883c4b..a41853b 100644
+--- a/sound/oss/Makefile
++++ b/sound/oss/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232) += cs4232.o ad1848.o
+
+ # Please leave it as is, cause the link order is significant !
+
++obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
+ obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
+ obj-$(CONFIG_SOUND_HAL2) += hal2.o
+ obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
+diff --git a/sound/oss/at32_abdac.c b/sound/oss/at32_abdac.c
+new file mode 100644
+index 0000000..cb997d7
+--- /dev/null
++++ b/sound/oss/at32_abdac.c
+@@ -0,0 +1,722 @@
++/*
++ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/sound.h>
++#include <linux/soundcard.h>
+
-+ If unsure, say N.
++#include <asm/byteorder.h>
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
+
- config FB_NVIDIA
- tristate "nVidia Framebuffer Support"
- depends on FB && PCI
-diff -x .git -Nur linux-2.6.22.1/include/asm-arm/arch-at91/board.h linux-avr32.git/include/asm-arm/arch-at91/board.h
---- linux-2.6.22.1/include/asm-arm/arch-at91/board.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/include/asm-arm/arch-at91/board.h 2007-07-12 14:00:26.000000000 +0200
-@@ -64,6 +64,7 @@
-
- /* Ethernet (EMAC & MACB) */
- struct at91_eth_data {
-+ u32 phy_mask;
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
- };
-diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h linux-avr32.git/include/asm-avr32/arch-at32ap/board.h
---- linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/include/asm-avr32/arch-at32ap/board.h 2007-07-12 14:00:26.000000000 +0200
-@@ -6,6 +6,8 @@
-
- #include <linux/types.h>
-
-+#define GPIO_PIN_NONE (-1)
++/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
++#include <linux/byteorder/swabb.h>
+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
-
-@@ -21,6 +23,7 @@
- struct platform_device *at32_add_device_usart(unsigned int id);
-
- struct eth_platform_data {
-+ u32 phy_mask;
- u8 is_rmii;
- };
- struct platform_device *
-@@ -30,9 +33,41 @@
- struct platform_device *
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
-
-+struct platform_device *at32_add_device_twi(unsigned int id);
++#include "at32_abdac.h"
+
-+struct mci_platform_data {
-+ int detect_pin;
-+ int wp_pin;
++#define DMA_BUFFER_SIZE 32768
++#define DMA_PERIOD_SHIFT 10
++#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
++#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
++
++struct sound_settings {
++ unsigned int format;
++ unsigned int channels;
++ unsigned int sample_rate;
++ /* log2(bytes per sample) */
++ unsigned int input_order;
+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
-+struct usba_platform_data {
-+ int vbus_pin;
++struct at32_dac {
++ spinlock_t lock;
++ void __iomem *regs;
++
++ /* head and tail refer to number of words */
++ struct {
++ u32 *buf;
++ int head;
++ int tail;
++ } dma;
++
++ struct semaphore sem;
++ wait_queue_head_t write_wait;
++
++ /*
++ * Read at most ucount bytes from ubuf, translate to 2-channel
++ * signed 16-bit big endian format and write to the DMA buffer
++ * as long as there is room left. Return the number of bytes
++ * successfully copied from ubuf, or -EFAULT if the first
++ * sample from ubuf couldn't be read. This function is not
++ * called unless there is room for at least one sample (4
++ * bytes) in the DMA buffer.
++ */
++ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount);
++
++ struct sound_settings dsp_settings;
++ struct dma_request_cyclic req;
++
++ struct clk *mck;
++ struct clk *sample_clk;
++ struct platform_device *pdev;
++ int busy;
++ int playing;
++ int dev_dsp;
+};
-+struct platform_device *
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
++static struct at32_dac *the_dac;
+
- struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- unsigned long fbmem_start, unsigned long fbmem_len);
-
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
++static inline unsigned int abdac_get_head(struct at32_dac *dac)
++{
++ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
++}
+
-+/* depending on what's hooked up, not all SSC pins will be used */
-+#define ATMEL_SSC_TK 0x01
-+#define ATMEL_SSC_TF 0x02
-+#define ATMEL_SSC_TD 0x04
-+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
++static inline unsigned int abdac_get_tail(struct at32_dac *dac)
++{
++ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
++}
+
-+#define ATMEL_SSC_RK 0x10
-+#define ATMEL_SSC_RF 0x20
-+#define ATMEL_SSC_RD 0x40
-+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
++static inline unsigned int abdac_dma_space(struct at32_dac *dac)
++{
++ unsigned int space;
+
-+struct platform_device *
-+at32_add_device_ssc(unsigned int id, unsigned int flags);
++ space = ((dac->dma.tail - dac->dma.head - 1)
++ & ((DMA_BUFFER_SIZE / 4) - 1));
++ return space;
++}
+
- #endif /* __ASM_ARCH_BOARD_H */
-diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h linux-avr32.git/include/asm-avr32/arch-at32ap/portmux.h
---- linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/include/asm-avr32/arch-at32ap/portmux.h 2007-07-12 14:00:26.000000000 +0200
-@@ -25,4 +25,16 @@
- void at32_select_gpio(unsigned int pin, unsigned long flags);
- void at32_reserve_pin(unsigned int pin);
-
-+#ifdef CONFIG_GPIO_DEV
++static void abdac_update_dma_tail(struct at32_dac *dac)
++{
++ dma_addr_t dma_addr;
++ unsigned int new_tail;
++
++ if (dac->playing) {
++ dma_addr = dma_get_current_pos(dac->req.req.dmac,
++ dac->req.req.channel);
++ new_tail = (dma_addr - dac->req.buffer_start) / 4;
++ if (new_tail >= dac->dma.head
++ && (dac->dma.tail < dac->dma.head
++ || dac->dma.tail > new_tail))
++ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
++ dac->dma.tail = new_tail;
++ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
++ dma_addr, dac->req.buffer_start, dac->dma.tail);
++ }
++}
+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port);
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
-+void at32_deselect_pins(unsigned int port, u32 pins);
++static int abdac_start(struct at32_dac *dac)
++{
++ int ret;
+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++ if (dac->playing)
++ return 0;
+
-+#endif /* CONFIG_GPIO_DEV */
++ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
+
- #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/arch-at32ap/sm.h linux-avr32.git/include/asm-avr32/arch-at32ap/sm.h
---- linux-2.6.22.1/include/asm-avr32/arch-at32ap/sm.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/include/asm-avr32/arch-at32ap/sm.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,27 +0,0 @@
--/*
-- * AT32 System Manager interface.
-- *
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#ifndef __ASM_AVR32_AT32_SM_H__
--#define __ASM_AVR32_AT32_SM_H__
--
--struct irq_chip;
--struct platform_device;
--
--struct at32_sm {
-- spinlock_t lock;
-- void __iomem *regs;
-- struct irq_chip *eim_chip;
-- unsigned int eim_first_irq;
-- struct platform_device *pdev;
--};
--
--extern struct platform_device at32_sm_device;
--extern struct at32_sm system_manager;
--
--#endif /* __ASM_AVR32_AT32_SM_H__ */
-diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/dma-controller.h linux-avr32.git/include/asm-avr32/dma-controller.h
---- linux-2.6.22.1/include/asm-avr32/dma-controller.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/include/asm-avr32/dma-controller.h 2007-06-06 11:34:11.000000000 +0200
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
++ clk_enable(dac->sample_clk);
+
-+#include <linux/device.h>
++ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
++ if (ret)
++ goto out_stop_clock;
+
-+#define DMA_DIR_MEM_TO_MEM 0x0000
-+#define DMA_DIR_MEM_TO_PERIPH 0x0001
-+#define DMA_DIR_PERIPH_TO_MEM 0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
++ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
++ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
++ if (ret)
++ goto out_stop_request;
+
-+#define DMA_WIDTH_8BIT 0
-+#define DMA_WIDTH_16BIT 1
-+#define DMA_WIDTH_32BIT 2
++ dac_writel(dac, CTRL, DAC_BIT(EN));
++ dac->playing = 1;
+
-+struct dma_request {
-+ struct dma_controller *dmac;
-+ struct list_head list;
++ return 0;
+
-+ unsigned short channel;
++out_stop_request:
++ dma_stop_request(dac->req.req.dmac,
++ dac->req.req.channel);
++out_stop_clock:
++ clk_disable(dac->sample_clk);
++ return ret;
++}
+
-+ void (*xfer_complete)(struct dma_request *req);
-+ void (*block_complete)(struct dma_request *req);
-+ void (*error)(struct dma_request *req);
-+};
++static int abdac_stop(struct at32_dac *dac)
++{
++ if (dac->playing) {
++ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
++ dac->playing = 0;
++ clk_disable(dac->sample_clk);
++ }
+
-+struct dma_request_sg {
-+ struct dma_request req;
++ return 0;
++}
+
-+ int nr_sg;
-+ struct scatterlist *sg;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
++static int abdac_dma_prepare(struct at32_dac *dac)
++{
++ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ &dac->req.buffer_start, GFP_KERNEL);
++ if (!dac->dma.buf)
++ return -ENOMEM;
+
-+ dma_addr_t data_reg;
-+ unsigned short periph_id;
++ dac->dma.head = dac->dma.tail = 0;
++ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
++ dac->req.buffer_size = DMA_BUFFER_SIZE;
+
-+ unsigned char direction;
-+ unsigned char width;
-+};
-+#define to_dma_request_sg(_req) \
-+ container_of(_req, struct dma_request_sg, req)
++ return 0;
++}
+
-+struct dma_request_cyclic {
-+ struct dma_request req;
++static void abdac_dma_cleanup(struct at32_dac *dac)
++{
++ if (dac->dma.buf)
++ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ dac->dma.buf, dac->req.buffer_start);
++ dac->dma.buf = NULL;
++}
+
-+ int periods;
-+ unsigned long buffer_size;
++static void abdac_dma_block_complete(struct dma_request *req)
++{
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
+
-+ dma_addr_t buffer_start;
-+ dma_addr_t data_reg;
++ wake_up(&dac->write_wait);
++}
+
-+ unsigned short periph_id;
-+ unsigned char direction;
-+ unsigned char width;
++static void abdac_dma_error(struct dma_request *req)
++{
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
+
-+ void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req) \
-+ container_of(_req, struct dma_request_cyclic, req)
++ dev_err(&dac->pdev->dev, "DMA error\n");
++}
+
-+struct dma_request_memcpy {
-+ struct dma_request req;
++static irqreturn_t abdac_interrupt(int irq, void *dev_id)
++{
++ struct at32_dac *dac = dev_id;
++ u32 status;
+
-+ dma_addr_t src_addr;
-+ unsigned int src_width;
-+ unsigned int src_stride;
++ status = dac_readl(dac, INT_STATUS);
++ if (status & DAC_BIT(UNDERRUN)) {
++ dev_err(&dac->pdev->dev, "Underrun detected!\n");
++ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
++ } else {
++ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
++ status);
++ dac_writel(dac, INT_CLR, status);
++ }
+
-+ dma_addr_t dst_addr;
-+ unsigned int dst_width;
-+ unsigned int dst_stride;
++ return IRQ_HANDLED;
++}
+
-+ size_t length;
++static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
++{
++ ssize_t ret;
+
-+ unsigned short src_reverse:1;
-+ unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req) \
-+ container_of(_req, struct dma_request_memcpy, req)
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
+
-+struct dma_controller {
-+ struct list_head list;
-+ int id;
-+ struct device *dev;
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!abdac_dma_space(dac))
++ break;
+
-+ int (*alloc_channel)(struct dma_controller *dmac);
-+ void (*release_channel)(struct dma_controller *dmac,
-+ int channel);
-+ int (*prepare_request_sg)(struct dma_controller *dmac,
-+ struct dma_request_sg *req);
-+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req);
-+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req);
-+ int (*start_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ int (*stop_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+ unsigned int channel);
-+};
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[abdac_get_head(dac)] = sample;
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[abdac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+ return dmac->alloc_channel(dmac);
++ return ret;
+}
+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
++static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
+{
-+ dmac->release_channel(dmac, chan);
++ ssize_t ret;
++
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ /* Swap bytes in each halfword */
++ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ sample = swab16(sample);
++ dac->dma.buf[abdac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
++
++ return ret;
+}
+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+ struct dma_request_sg *req)
++static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
++ const char __user *buffer,
++ size_t count)
+{
-+ return dmac->prepare_request_sg(dmac, req);
++ /* At least one buffer must be available at this point */
++ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
++
++ return dac->trans(dac, buffer, count);
+}
+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req)
++static int abdac_set_format(struct at32_dac *dac, int format)
+{
-+ return dmac->prepare_request_cyclic(dmac, req);
++ unsigned int order;
++
++ switch (format) {
++ case AFMT_S16_BE:
++ order = 1;
++ dac->trans = trans_s16be;
++ break;
++ case AFMT_S16_LE:
++ order = 1;
++ dac->trans = trans_s16le;
++ break;
++ default:
++ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
++ return -EINVAL;
++ }
++
++ if (dac->dsp_settings.channels == 2)
++ order++;
++
++ dac->dsp_settings.input_order = order;
++ dac->dsp_settings.format = format;
++ return 0;
+}
+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req)
++static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
+{
-+ return dmac->prepare_request_memcpy(dmac, req);
++ unsigned long new_rate;
++ int ret;
++
++ ret = clk_set_rate(dac->sample_clk, 256 * rate);
++ if (ret < 0)
++ return ret;
++
++ /* TODO: mplayer seems to have a problem with this */
++#if 0
++ new_rate = clk_get_rate(dac->sample_clk);
++ dac->dsp_settings.sample_rate = new_rate / 256;
++#else
++ dac->dsp_settings.sample_rate = rate;
++#endif
++
++ return 0;
+}
+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+ unsigned int channel)
++static ssize_t abdac_dsp_write(struct file *file,
++ const char __user *buffer,
++ size_t count, loff_t *ppos)
+{
-+ return dmac->start_request(dmac, channel);
++ struct at32_dac *dac = file->private_data;
++ DECLARE_WAITQUEUE(wait, current);
++ unsigned int avail;
++ ssize_t copied;
++ ssize_t ret;
++
++ /* Avoid address space checking in the translation functions */
++ if (!access_ok(buffer, count, VERIFY_READ))
++ return -EFAULT;
++
++ down(&dac->sem);
++
++ if (!dac->dma.buf) {
++ ret = abdac_dma_prepare(dac);
++ if (ret)
++ goto out;
++ }
++
++ add_wait_queue(&dac->write_wait, &wait);
++ ret = 0;
++ while (count > 0) {
++ do {
++ abdac_update_dma_tail(dac);
++ avail = abdac_dma_space(dac);
++ set_current_state(TASK_INTERRUPTIBLE);
++ if (avail >= DMA_WRITE_THRESHOLD)
++ break;
++
++ if (file->f_flags & O_NONBLOCK) {
++ if (!ret)
++ ret = -EAGAIN;
++ goto out;
++ }
++
++ pr_debug("Going to wait (avail = %u, count = %zu)\n",
++ avail, count);
++
++ up(&dac->sem);
++ schedule();
++ if (signal_pending(current)) {
++ if (!ret)
++ ret = -ERESTARTSYS;
++ goto out_nosem;
++ }
++ down(&dac->sem);
++ } while (1);
++
++ copied = abdac_dma_translate_from_user(dac, buffer, count);
++ if (copied < 0) {
++ if (!ret)
++ ret = -EFAULT;
++ goto out;
++ }
++
++ abdac_start(dac);
++
++ count -= copied;
++ ret += copied;
++ }
++
++out:
++ up(&dac->sem);
++out_nosem:
++ remove_wait_queue(&dac->write_wait, &wait);
++ set_current_state(TASK_RUNNING);
++ return ret;
+}
+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+ unsigned int channel)
++static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
+{
-+ return dmac->stop_request(dmac, channel);
++ struct at32_dac *dac = file->private_data;
++ int __user *up = (int __user *)arg;
++ struct audio_buf_info abinfo;
++ int val, ret;
++
++ switch (cmd) {
++ case OSS_GETVERSION:
++ return put_user(SOUND_VERSION, up);
++
++ case SNDCTL_DSP_SPEED:
++ if (get_user(val, up))
++ return -EFAULT;
++ if (val >= 0) {
++ abdac_stop(dac);
++ ret = abdac_set_sample_rate(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(dac->dsp_settings.sample_rate, up);
++
++ case SNDCTL_DSP_STEREO:
++ if (get_user(val, up))
++ return -EFAULT;
++ abdac_stop(dac);
++ if (val && dac->dsp_settings.channels == 1)
++ dac->dsp_settings.input_order++;
++ else if (!val && dac->dsp_settings.channels != 1)
++ dac->dsp_settings.input_order--;
++ dac->dsp_settings.channels = val ? 2 : 1;
++ return 0;
++
++ case SNDCTL_DSP_CHANNELS:
++ if (get_user(val, up))
++ return -EFAULT;
++
++ if (val) {
++ if (val < 0 || val > 2)
++ return -EINVAL;
++
++ abdac_stop(dac);
++ dac->dsp_settings.input_order
++ += val - dac->dsp_settings.channels;
++ dac->dsp_settings.channels = val;
++ }
++ return put_user(val, (int *)arg);
++
++ case SNDCTL_DSP_GETFMTS:
++ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
++
++ case SNDCTL_DSP_SETFMT:
++ if (get_user(val, up))
++ return -EFAULT;
++
++ if (val == AFMT_QUERY) {
++ val = dac->dsp_settings.format;
++ } else {
++ ret = abdac_set_format(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(val, up);
++
++ case SNDCTL_DSP_GETOSPACE:
++ abdac_update_dma_tail(dac);
++ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
++ * (DMA_PERIOD_SIZE / 4));
++ abinfo.bytes = (abdac_dma_space(dac)
++ << dac->dsp_settings.input_order);
++ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
++ >> (DMA_PERIOD_SHIFT
++ + dac->dsp_settings.input_order));
++ abinfo.fragments = ((abinfo.bytes
++ >> dac->dsp_settings.input_order)
++ / (DMA_PERIOD_SIZE / 4));
++ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
++ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
++ abinfo.bytes);
++ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
++
++ default:
++ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
++ return -EINVAL;
++ }
+}
+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+ unsigned int channel)
++static int abdac_dsp_open(struct inode *inode, struct file *file)
+{
-+ return dmac->get_current_pos(dmac, channel);
++ struct at32_dac *dac = the_dac;
++ int ret;
++
++ if (file->f_mode & FMODE_READ)
++ return -ENXIO;
++
++ down(&dac->sem);
++ ret = -EBUSY;
++ if (dac->busy)
++ goto out;
++
++ dac->dma.head = dac->dma.tail = 0;
++
++ /* FIXME: What are the correct defaults? */
++ dac->dsp_settings.channels = 2;
++ abdac_set_format(dac, AFMT_S16_BE);
++ ret = abdac_set_sample_rate(dac, 8000);
++ if (ret)
++ goto out;
++
++ file->private_data = dac;
++ dac->busy = 1;
++
++ ret = 0;
++
++out:
++ up(&dac->sem);
++ return ret;
+}
+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
++static int abdac_dsp_release(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = file->private_data;
+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/unaligned.h linux-avr32.git/include/asm-avr32/unaligned.h
---- linux-2.6.22.1/include/asm-avr32/unaligned.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/include/asm-avr32/unaligned.h 2007-07-12 14:00:26.000000000 +0200
-@@ -7,19 +7,10 @@
- * words, but halfwords must be halfword-aligned, and doublewords must
- * be word-aligned.
- *
-- * TODO: Make all this CPU-specific and optimize.
-+ * However, swapped word loads must be word-aligned so we can't
-+ * optimize word loads in general.
- */
-
--#include <linux/string.h>
--
--/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
--
--#define get_unaligned(ptr) \
-- ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
--
--#define put_unaligned(val, ptr) \
-- ({ __typeof__(*(ptr)) __tmp = (val); \
-- memmove((ptr), &__tmp, sizeof(*(ptr))); \
-- (void)0; })
-+#include <asm-generic/unaligned.h>
-
- #endif /* __ASM_AVR32_UNALIGNED_H */
-diff -x .git -Nur linux-2.6.22.1/include/linux/gpio_mouse.h linux-avr32.git/include/linux/gpio_mouse.h
---- linux-2.6.22.1/include/linux/gpio_mouse.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/include/linux/gpio_mouse.h 2007-07-13 11:24:16.000000000 +0200
-@@ -0,0 +1,61 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
++ down(&dac->sem);
+
-+#ifndef _GPIO_MOUSE_H
-+#define _GPIO_MOUSE_H
++ abdac_stop(dac);
++ abdac_dma_cleanup(dac);
++ dac->busy = 0;
+
-+#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00
-+#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01
++ up(&dac->sem);
+
-+#define GPIO_MOUSE_PIN_UP 0
-+#define GPIO_MOUSE_PIN_DOWN 1
-+#define GPIO_MOUSE_PIN_LEFT 2
-+#define GPIO_MOUSE_PIN_RIGHT 3
-+#define GPIO_MOUSE_PIN_BLEFT 4
-+#define GPIO_MOUSE_PIN_BMIDDLE 5
-+#define GPIO_MOUSE_PIN_BRIGHT 6
-+#define GPIO_MOUSE_PIN_MAX 7
++ return 0;
++}
+
-+/**
-+ * struct gpio_mouse_platform_data
-+ * @scan_ms: integer in ms specifying the scan periode.
-+ * @polarity: Pin polarity, active high or low.
-+ * @up: GPIO line for up value.
-+ * @down: GPIO line for down value.
-+ * @left: GPIO line for left value.
-+ * @right: GPIO line for right value.
-+ * @bleft: GPIO line for left button.
-+ * @bmiddle: GPIO line for middle button.
-+ * @bright: GPIO line for right button.
-+ *
-+ * This struct must be added to the platform_device in the board code.
-+ * It is used by the gpio_mouse driver to setup GPIO lines and to
-+ * calculate mouse movement.
-+ */
-+struct gpio_mouse_platform_data {
-+ int scan_ms;
-+ int polarity;
-+
-+ union {
-+ struct {
-+ int up;
-+ int down;
-+ int left;
-+ int right;
-+
-+ int bleft;
-+ int bmiddle;
-+ int bright;
-+ };
-+ int pins[GPIO_MOUSE_PIN_MAX];
-+ };
++static struct file_operations abdac_dsp_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = abdac_dsp_write,
++ .ioctl = abdac_dsp_ioctl,
++ .open = abdac_dsp_open,
++ .release = abdac_dsp_release,
+};
+
-+#endif /* _GPIO_MOUSE_H */
-diff -x .git -Nur linux-2.6.22.1/include/linux/leds.h linux-avr32.git/include/linux/leds.h
---- linux-2.6.22.1/include/linux/leds.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/include/linux/leds.h 2007-07-12 14:00:30.000000000 +0200
-@@ -110,4 +110,18 @@
- #define ledtrig_ide_activity() do {} while(0)
- #endif
-
-+/* For the leds-gpio driver */
-+struct gpio_led {
-+ const char *name;
-+ char *default_trigger;
-+ unsigned gpio;
-+ u8 active_low;
-+};
++static int __init abdac_probe(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++ struct resource *regs;
++ struct clk *mck;
++ struct clk *sample_clk;
++ int irq;
++ int ret;
+
-+struct gpio_led_platform_data {
-+ int num_leds;
-+ struct gpio_led *leds;
-+};
++ if (the_dac)
++ return -EBUSY;
+
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
+
- #endif /* __LINUX_LEDS_H_INCLUDED */
-diff -x .git -Nur linux-2.6.22.1/include/linux/usb/gadgetfs.h linux-avr32.git/include/linux/usb/gadgetfs.h
---- linux-2.6.22.1/include/linux/usb/gadgetfs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-avr32.git/include/linux/usb/gadgetfs.h 2007-07-12 14:00:31.000000000 +0200
-@@ -0,0 +1,81 @@
-+#ifndef __LINUX_USB_GADGETFS_H
-+#define __LINUX_USB_GADGETFS_H
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ sample_clk = clk_get(&pdev->dev, "sample_clk");
++ if (IS_ERR(sample_clk)) {
++ ret = PTR_ERR(sample_clk);
++ goto out_put_mck;
++ }
++ clk_enable(mck);
+
-+#include <asm/types.h>
-+#include <asm/ioctl.h>
++ ret = -ENOMEM;
++ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
++ if (!dac)
++ goto out_disable_clk;
+
-+#include <linux/usb/ch9.h>
++ spin_lock_init(&dac->lock);
++ init_MUTEX(&dac->sem);
++ init_waitqueue_head(&dac->write_wait);
++ dac->pdev = pdev;
++ dac->mck = mck;
++ dac->sample_clk = sample_clk;
+
-+/*
-+ * Filesystem based user-mode API to USB Gadget controller hardware
-+ *
-+ * Other than ep0 operations, most things are done by read() and write()
-+ * on endpoint files found in one directory. They are configured by
-+ * writing descriptors, and then may be used for normal stream style
-+ * i/o requests. When ep0 is configured, the device can enumerate;
-+ * when it's closed, the device disconnects from usb. Operations on
-+ * ep0 require ioctl() operations.
-+ *
-+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
-+ * which may then be used to read usb_gadgetfs_event structs. The driver
-+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
-+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
-+ * then performing data transfers by reading or writing.
-+ */
++ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dac->regs)
++ goto out_free_dac;
+
-+/*
-+ * Events are delivered on the ep0 file descriptor, when the user mode driver
-+ * reads from this file descriptor after writing the descriptors. Don't
-+ * stop polling this descriptor.
-+ */
++ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
++ if (ret)
++ goto out_unmap_regs;
+
-+enum usb_gadgetfs_event_type {
-+ GADGETFS_NOP = 0,
++ /* FIXME */
++ dac->req.req.dmac = find_dma_controller(0);
++ if (!dac->req.req.dmac)
++ goto out_free_irq;
+
-+ GADGETFS_CONNECT,
-+ GADGETFS_DISCONNECT,
-+ GADGETFS_SETUP,
-+ GADGETFS_SUSPEND,
-+ // and likely more !
-+};
++ ret = dma_alloc_channel(dac->req.req.dmac);
++ if (ret < 0)
++ goto out_free_irq;
+
-+/* NOTE: this structure must stay the same size and layout on
-+ * both 32-bit and 64-bit kernels.
-+ */
-+struct usb_gadgetfs_event {
-+ union {
-+ // NOP, DISCONNECT, SUSPEND: nothing
-+ // ... some hardware can't report disconnection
++ dac->req.req.channel = ret;
++ dac->req.req.block_complete = abdac_dma_block_complete;
++ dac->req.req.error = abdac_dma_error;
++ dac->req.data_reg = regs->start + DAC_DATA;
++ dac->req.periph_id = 2; /* FIXME */
++ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
++ dac->req.width = DMA_WIDTH_32BIT;
+
-+ // CONNECT: just the speed
-+ enum usb_device_speed speed;
++ /* Make sure the DAC is silent and disabled */
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
+
-+ // SETUP: packet; DATA phase i/o precedes next event
-+ // (setup.bmRequestType & USB_DIR_IN) flags direction
-+ // ... includes SET_CONFIGURATION, SET_INTERFACE
-+ struct usb_ctrlrequest setup;
-+ } u;
-+ enum usb_gadgetfs_event_type type;
-+};
++ ret = register_sound_dsp(&abdac_dsp_fops, -1);
++ if (ret < 0)
++ goto out_free_dma;
++ dac->dev_dsp = ret;
+
++ /* TODO: Register mixer */
+
-+/* endpoint ioctls */
++ the_dac = dac;
++ platform_set_drvdata(pdev, dac);
+
-+/* IN transfers may be reported to the gadget driver as complete
-+ * when the fifo is loaded, before the host reads the data;
-+ * OUT transfers may be reported to the host's "client" driver as
-+ * complete when they're sitting in the FIFO unread.
-+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
-+ * (needed for precise fault handling, when the hardware allows it)
-+ */
-+#define GADGETFS_FIFO_STATUS _IO('g',1)
++ return 0;
+
-+/* discards any unclaimed data in the fifo. */
-+#define GADGETFS_FIFO_FLUSH _IO('g',2)
++out_free_dma:
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++out_free_irq:
++ free_irq(irq, dac);
++out_unmap_regs:
++ iounmap(dac->regs);
++out_free_dac:
++ kfree(dac);
++out_disable_clk:
++ clk_disable(mck);
++ clk_put(sample_clk);
++out_put_mck:
++ clk_put(mck);
++ return ret;
++}
+
-+/* resets endpoint halt+toggle; used to implement set_interface.
-+ * some hardware (like pxa2xx) can't support this.
-+ */
-+#define GADGETFS_CLEAR_HALT _IO('g',3)
++static int __exit abdac_remove(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++
++ dac = platform_get_drvdata(pdev);
++ if (dac) {
++ unregister_sound_dsp(dac->dev_dsp);
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++ free_irq(platform_get_irq(pdev, 0), dac);
++ iounmap(dac->regs);
++ clk_disable(dac->mck);
++ clk_put(dac->sample_clk);
++ clk_put(dac->mck);
++ kfree(dac);
++ platform_set_drvdata(pdev, NULL);
++ the_dac = NULL;
++ }
+
-+#endif /* __LINUX_USB_GADGETFS_H */
-diff -x .git -Nur linux-2.6.22.1/include/linux/usb/Kbuild linux-avr32.git/include/linux/usb/Kbuild
---- linux-2.6.22.1/include/linux/usb/Kbuild 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/include/linux/usb/Kbuild 2007-07-12 14:00:31.000000000 +0200
-@@ -1,5 +1,6 @@
- unifdef-y += audio.h
- unifdef-y += cdc.h
- unifdef-y += ch9.h
-+unifdef-y += gadgetfs.h
- unifdef-y += midi.h
-
-diff -x .git -Nur linux-2.6.22.1/include/linux/usb_gadgetfs.h linux-avr32.git/include/linux/usb_gadgetfs.h
---- linux-2.6.22.1/include/linux/usb_gadgetfs.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/include/linux/usb_gadgetfs.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,75 +0,0 @@
--
--#include <asm/types.h>
--#include <asm/ioctl.h>
--
--#include <linux/usb/ch9.h>
--
--/*
-- * Filesystem based user-mode API to USB Gadget controller hardware
-- *
-- * Almost everything can be done with only read and write operations,
-- * on endpoint files found in one directory. They are configured by
-- * writing descriptors, and then may be used for normal stream style
-- * i/o requests. When ep0 is configured, the device can enumerate;
-- * when it's closed, the device disconnects from usb.
-- *
-- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
-- * which may then be used to read usb_gadgetfs_event structs. The driver
-- * may activate endpoints as it handles SET_CONFIGURATION setup events,
-- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
-- * then performing data transfers by reading or writing.
-- */
--
--/*
-- * Events are delivered on the ep0 file descriptor, if the user mode driver
-- * reads from this file descriptor after writing the descriptors. Don't
-- * stop polling this descriptor, if you write that kind of driver.
-- */
--
--enum usb_gadgetfs_event_type {
-- GADGETFS_NOP = 0,
--
-- GADGETFS_CONNECT,
-- GADGETFS_DISCONNECT,
-- GADGETFS_SETUP,
-- GADGETFS_SUSPEND,
-- // and likely more !
--};
--
--struct usb_gadgetfs_event {
-- enum usb_gadgetfs_event_type type;
-- union {
-- // NOP, DISCONNECT, SUSPEND: nothing
-- // ... some hardware can't report disconnection
--
-- // CONNECT: just the speed
-- enum usb_device_speed speed;
--
-- // SETUP: packet; DATA phase i/o precedes next event
-- // (setup.bmRequestType & USB_DIR_IN) flags direction
-- // ... includes SET_CONFIGURATION, SET_INTERFACE
-- struct usb_ctrlrequest setup;
-- } u;
--};
--
--
--/* endpoint ioctls */
--
--/* IN transfers may be reported to the gadget driver as complete
-- * when the fifo is loaded, before the host reads the data;
-- * OUT transfers may be reported to the host's "client" driver as
-- * complete when they're sitting in the FIFO unread.
-- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
-- * (needed for precise fault handling, when the hardware allows it)
-- */
--#define GADGETFS_FIFO_STATUS _IO('g',1)
--
--/* discards any unclaimed data in the fifo. */
--#define GADGETFS_FIFO_FLUSH _IO('g',2)
--
--/* resets endpoint halt+toggle; used to implement set_interface.
-- * some hardware (like pxa2xx) can't support this.
-- */
--#define GADGETFS_CLEAR_HALT _IO('g',3)
--
--
-diff -x .git -Nur linux-2.6.22.1/init/do_mounts.c linux-avr32.git/init/do_mounts.c
---- linux-2.6.22.1/init/do_mounts.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/init/do_mounts.c 2007-07-12 14:00:31.000000000 +0200
-@@ -25,6 +25,7 @@
- int root_mountflags = MS_RDONLY | MS_SILENT;
- char * __initdata root_device_name;
- static char __initdata saved_root_name[64];
-+int __initdata root_wait;
-
- dev_t ROOT_DEV;
-
-@@ -216,6 +217,14 @@
-
- __setup("root=", root_dev_setup);
-
-+static int __init rootwait_setup(char *line)
++ return 0;
++}
++
++static struct platform_driver abdac_driver = {
++ .remove = __exit_p(abdac_remove),
++ .driver = {
++ .name = "abdac",
++ },
++};
++
++static int __init abdac_init(void)
+{
-+ root_wait = simple_strtol(line,NULL,0);
-+ return 1;
++ return platform_driver_probe(&abdac_driver, abdac_probe);
+}
++module_init(abdac_init);
+
-+__setup("rootwait=", rootwait_setup);
++static void __exit abdac_exit(void)
++{
++ platform_driver_unregister(&abdac_driver);
++}
++module_exit(abdac_exit);
+
- static char * __initdata root_mount_data;
- static int __init root_data_setup(char *str)
- {
-@@ -438,11 +447,24 @@
- root_device_name += 5;
- }
-
-- is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
--
- if (initrd_load())
- goto out;
-
-+ /* wait for any asynchronous scanning to complete */
-+ if ((ROOT_DEV == 0) && root_wait) {
-+ printk(KERN_INFO "Waiting for root device %s...\n",
-+ saved_root_name);
-+ do {
-+ while (driver_probe_done() != 0)
-+ msleep(100);
-+ ROOT_DEV = name_to_dev_t(saved_root_name);
-+ if (ROOT_DEV == 0)
-+ msleep(100);
-+ } while (ROOT_DEV == 0);
-+ }
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
++MODULE_LICENSE("GPL");
+diff --git a/sound/oss/at32_abdac.h b/sound/oss/at32_abdac.h
+new file mode 100644
+index 0000000..3c88e25
+--- /dev/null
++++ b/sound/oss/at32_abdac.h
+@@ -0,0 +1,59 @@
++/*
++ * Register definitions for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_OSS_AT32_ABDAC_H__
++#define __SOUND_OSS_AT32_ABDAC_H__
++
++/* DAC register offsets */
++#define DAC_DATA 0x0000
++#define DAC_CTRL 0x0008
++#define DAC_INT_MASK 0x000c
++#define DAC_INT_EN 0x0010
++#define DAC_INT_DIS 0x0014
++#define DAC_INT_CLR 0x0018
++#define DAC_INT_STATUS 0x001c
++#define DAC_PDC_DATA 0x0020
++
++/* Bitfields in CTRL */
++#define DAC_SWAP_OFFSET 30
++#define DAC_SWAP_SIZE 1
++#define DAC_EN_OFFSET 31
++#define DAC_EN_SIZE 1
++
++/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
++#define DAC_UNDERRUN_OFFSET 28
++#define DAC_UNDERRUN_SIZE 1
++#define DAC_TX_READY_OFFSET 29
++#define DAC_TX_READY_SIZE 1
++#define DAC_TX_BUFFER_EMPTY_OFFSET 30
++#define DAC_TX_BUFFER_EMPTY_SIZE 1
++#define DAC_CHANNEL_TX_END_OFFSET 31
++#define DAC_CHANNEL_TX_END_SIZE 1
+
-+ is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
++/* Bit manipulation macros */
++#define DAC_BIT(name) \
++ (1 << DAC_##name##_OFFSET)
++#define DAC_BF(name, value) \
++ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
++ << DAC_##name##_OFFSET)
++#define DAC_BFEXT(name, value) \
++ (((value) >> DAC_##name##_OFFSET) \
++ & ((1 << DAC_##name##_SIZE) - 1))
++#define DAC_BFINS(name, value, old) \
++ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
++ << DAC_##name##_OFFSET)) \
++ | DAC_BF(name,value))
+
- if (is_floppy && rd_doload && rd_load_disk(0))
- ROOT_DEV = Root_RAM0;
-
-diff -x .git -Nur linux-2.6.22.1/MAINTAINERS linux-avr32.git/MAINTAINERS
---- linux-2.6.22.1/MAINTAINERS 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/MAINTAINERS 2007-07-12 13:59:48.000000000 +0200
-@@ -674,6 +674,13 @@
- M: hskinnemoen@atmel.com
- S: Supported
-
-+ATMEL USBA UDC DRIVER
-+P: Haavard Skinnemoen
-+M: hskinnemoen@atmel.com
-+L: kernel@avr32linux.org
-+W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
-+S: Supported
++/* Register access macros */
++#define dac_readl(port, reg) \
++ __raw_readl((port)->regs + DAC_##reg)
++#define dac_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + DAC_##reg)
+
- ATMEL WIRELESS DRIVER
- P: Simon Kelley
- M: simon@thekelleys.org.uk
-diff -x .git -Nur linux-2.6.22.1/scripts/checkstack.pl linux-avr32.git/scripts/checkstack.pl
---- linux-2.6.22.1/scripts/checkstack.pl 2007-07-10 20:56:30.000000000 +0200
-+++ linux-avr32.git/scripts/checkstack.pl 2007-06-06 11:34:14.000000000 +0200
-@@ -12,6 +12,7 @@
- # sh64 port by Paul Mundt
- # Random bits by Matt Mackall <mpm@selenic.com>
- # M68k port by Geert Uytterhoeven and Andreas Schwab
-+# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- # Usage:
- # objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@
- if ($arch eq 'arm') {
- #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
- $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+ } elsif ($arch eq 'avr32') {
-+ #8000008a: 20 1d sub sp,4
-+ #80000ca8: fa cd 05 b0 sub sp,sp,1456
-+ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- } elsif ($arch =~ /^i[3456]86$/) {
- #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
- $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
++#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
projects / openwrt.git / blobdiff