[malta] create two endian-specific subtargets, as malta can run both

[openwrt.git] / target / linux / etrax / patches-2.6.32 / 300-usb_support.patch

diff --git a/target/linux/etrax/patches-2.6.32/300-usb_support.patch b/target/linux/etrax/patches-2.6.32/300-usb_support.patch
index 7b29726..0a0f81f 100644 (file)
--- a/target/linux/etrax/patches-2.6.32/300-usb_support.patch
+++ b/target/linux/etrax/patches-2.6.32/300-usb_support.patch
@@ -1,7 +1,7 @@
 --- a/drivers/usb/host/Makefile
 +++ b/drivers/usb/host/Makefile
 --- a/drivers/usb/host/Makefile
 +++ b/drivers/usb/host/Makefile

-@@ -25,6 +25,7 @@ obj-$(CONFIG_USB_UHCI_HCD)   += uhci-hcd.o
- obj-$(CONFIG_USB_FHCI_HCD)    += fhci.o
+@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_FHCI_HCD)   += fhci.o
+ obj-$(CONFIG_USB_XHCI_HCD)    += xhci.o

  obj-$(CONFIG_USB_SL811_HCD)   += sl811-hcd.o
  obj-$(CONFIG_USB_SL811_CS)    += sl811_cs.o
 +obj-$(CONFIG_ETRAX_USB_HOST)  += hc-crisv10.o
  obj-$(CONFIG_USB_SL811_HCD)   += sl811-hcd.o
  obj-$(CONFIG_USB_SL811_CS)    += sl811_cs.o
 +obj-$(CONFIG_ETRAX_USB_HOST)  += hc-crisv10.o


@@ -10,7 +10,7 @@
  obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
  obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile

-@@ -19,6 +19,7 @@ obj-$(CONFIG_USB_U132_HCD)   += host/
+@@ -21,6 +21,7 @@ obj-$(CONFIG_USB_U132_HCD)   += host/

  obj-$(CONFIG_USB_R8A66597_HCD)        += host/
  obj-$(CONFIG_USB_HWA_HCD)     += host/
  obj-$(CONFIG_USB_ISP1760_HCD) += host/
  obj-$(CONFIG_USB_R8A66597_HCD)        += host/
  obj-$(CONFIG_USB_HWA_HCD)     += host/
  obj-$(CONFIG_USB_ISP1760_HCD) += host/