Added support for 2.6.27 kernel
[openwrt.git] / package / madwifi / Makefile
index 697f2b6..e6d13a9 100644 (file)
@@ -10,28 +10,64 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
-PKG_REV:=3314
-PKG_VERSION:=r$(PKG_REV)
+
+ifneq ($(CONFIG_MADWIFI_UPSTREAM),)
+  PKG_VERSION:=0.9.4
+  PKG_RELEASE:=1
+
+  PKG_SOURCE:=madwifi-$(PKG_VERSION).tar.gz
+  PKG_SOURCE_URL:=http://downloads.sourceforge.net/madwifi/
+  PKG_MD5SUM:=399d20de8d855a59f20058857c2178ad
+
+  PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/madwifi-$(PKG_VERSION)
+
+  PATCH_DIR=./patches-upstream
+else
 # PKG_BRANCH:=madwifi-dfs
-PKG_RELEASE:=1
+  PKG_REV:=3314
+  PKG_VERSION:=r$(PKG_REV)
+  PKG_RELEASE:=1
+
+  PKG_SOURCE_PROTO:=svn
+  PKG_SOURCE_VERSION:=$(PKG_REV)
+  PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+  PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+  PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
 
-PKG_SOURCE_PROTO:=svn
-PKG_SOURCE_VERSION:=$(PKG_REV)
-PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
-PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
-PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
+  PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
 
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+  PATCH_DIR=./patches
+endif
 
 include $(INCLUDE_DIR)/package.mk
 
-# MADWIFI_DEBUG=1
+ifneq ($(CONFIG_TARGET_atheros),)
+  BUS:=AHB
+else
+  ifneq ($(CONFIG_PCI_SUPPORT),)
+    BUS:=PCI
+  endif
+endif
 
-ifeq ($(ARCH),mips)
-  HAL_TARGET:=mips-be-elf
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
+  BUS:=
 endif
-ifeq ($(ARCH),mipsel)
-  HAL_TARGET:=mips-le-elf
+
+ifneq ($(CONFIG_CPU_MIPS32_R2),)
+  ifeq ($(ARCH),mips)
+    HAL_TARGET:=mips32r2-be-elf
+  endif
+  ifeq ($(ARCH),mipsel)
+    HAL_TARGET:=mips32r2-le-elf
+  endif
+else
+  ifeq ($(ARCH),mips)
+    HAL_TARGET:=$(if $(CONFIG_MADWIFI_UPSTREAM),mips-be-elf,mips32-be-elf)
+  endif
+  ifeq ($(ARCH),mipsel)
+    HAL_TARGET:=$(if $(CONFIG_MADWIFI_UPSTREAM),mips-le-elf,mips32-le-elf)
+  endif
 endif
 ifeq ($(ARCH),i386)
   HAL_TARGET:=i386-elf
@@ -40,33 +76,39 @@ ifeq ($(ARCH),i686)
   HAL_TARGET:=i386-elf
 endif
 ifeq ($(BOARD),ixp4xx)
-  HAL_TARGET:=xscale-be-elf
+  HAL_TARGET:=xscale-be-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
 endif
 ifeq ($(BOARD),iop32x)
-  HAL_TARGET:=xscale-le-elf
+  HAL_TARGET:=xscale-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
+endif
+ifeq ($(BOARD),orion)
+  HAL_TARGET:=xscale-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
 endif
 ifeq ($(ARCH),powerpc)
   HAL_TARGET:=powerpc-be-elf
 endif
 ifeq ($(BOARD),storm)
-  HAL_TARGET:=armv4-le-elf
+  HAL_TARGET:=armv4-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
 endif
-
 ifneq ($(CONFIG_TARGET_atheros),)
-  BUS:=AHB
-  HAL_TARGET:=ap51
-else
-  ifneq ($(CONFIG_PCI_SUPPORT),)
-    BUS:=PCI
-  endif
+  HAL_TARGET:=wisoc
 endif
 
-# XXX: remove this check later when we have PCI support properly detected on all targets
-ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
- BUS:=
+ifdef CONFIG_MADWIFI_RCA_MINSTREL
+  RATE_CONTROL:=minstrel
+endif
+
+ifdef CONFIG_MADWIFI_RCA_ONOE
+  RATE_CONTROL:=onoe
 endif
 
-RATE_CONTROL:=minstrel
+ifdef CONFIG_MADWIFI_RCA_AMRR
+  RATE_CONTROL:=amrr
+endif
+
+ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
+  RATE_CONTROL:=sample
+endif
 
 MADWIFI_FILES:= \
        $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
@@ -101,11 +143,13 @@ ifeq ($(findstring PCI,$(BUS)),PCI)
   MADWIFI_AUTOLOAD+= ath_pci
 endif
 
-MADWIFI_APPLETS:=80211stats,athchans,athctrl,athkey,athstats,wlanconfig
-ifneq ($(MADWIFI_DEBUG),)
-  MADWIFI_APPLETS:=$(strip $(MADWIFI_APPLETS)),athdebug,80211debug
+MADWIFI_APPLETS:=80211stats athchans athctrl athkey athstats wlanconfig ath_info
+ifdef CONFIG_MADWIFI_DEBUG
+  MADWIFI_APPLETS += athdebug 80211debug
+endif
+ifndef CONFIG_MADWIFI_UPSTREAM
+  MADWIFI_APPLETS += madwifi_multi
 endif
-
 
 define KernelPackage/madwifi
   SUBMENU:=Wireless Drivers
@@ -120,6 +164,10 @@ define KernelPackage/madwifi/description
  This package contains a driver for Atheros 802.11a/b/g chipsets.
 endef
 
+define KernelPackage/madwifi/config
+       source "$(SOURCE)/Config.in"
+endef
+
 MAKE_ARGS:= \
        PATH="$(TARGET_PATH)" \
        ARCH="$(LINUX_KARCH)" \
@@ -130,17 +178,18 @@ MAKE_ARGS:= \
        KERNELPATH="$(LINUX_DIR)" \
        LDOPTS="--no-warn-mismatch " \
        ATH_RATE="ath_rate/$(RATE_CONTROL)" \
-       WARNINGS="-Wno-unused" \
-       $(if $(MADWIFI_DEBUG),,DEBUG="") \
-       DOMULTI=1
+       DO_MULTI=1 \
+       $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG=) WARNINGS="-Wno-unused"
 
 MAKE_VARS:= \
-       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
+       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
+
+ifeq ($(CONFIG_MADWIFI_UPSTREAM),)
+  HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
+endif
 
-HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
 ifneq ($(HALFILE),)
-  define Build/Prepare
-       $(call Build/Prepare/Default)
+  define Build/Prepare/HAL
        rm -rf $(PKG_BUILD_DIR)/tmp
        mkdir -p $(PKG_BUILD_DIR)/tmp
        tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
@@ -149,6 +198,18 @@ ifneq ($(HALFILE),)
   endef
 endif
 
+define Build/Prepare
+       $(call Build/Prepare/Default)
+       $(call Build/Prepare/HAL)
+       # patch cflags
+       $(SED) 's, -E[LB],,' \
+               -e 's, -mips2,,' \
+               -e 's, -mapcs-32,,' \
+               $(PKG_BUILD_DIR)/hal/public/*.inc
+       $(SED) 's,march=armv4,march=armv5te,' \
+               $(PKG_BUILD_DIR)/hal/public/xscale*.inc
+endef
+
 ifeq ($(findstring AHB,$(BUS)),AHB)
   define Build/Compile/ahb
        $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
@@ -180,10 +241,9 @@ define Build/InstallDev
 endef
 
 define KernelPackage/madwifi/install
-       $(INSTALL_DIR) $(1)/lib/wifi
-       $(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
        $(INSTALL_DIR) $(1)/usr/sbin
-       $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,$(MADWIFI_APPLETS)} $(1)/usr/sbin/
+       $(CP) ./files/* $(1)/
+       $(CP) $(foreach applet,$(MADWIFI_APPLETS),$(PKG_BUILD_DIR)/tools/$(applet)) $(1)/usr/sbin/
 endef
 
 $(eval $(call KernelPackage,madwifi))
This page took 0.031325 seconds and 4 git commands to generate.