/*
* D-Link DIR-300 rev B board support
*
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ralink/machine.h>
-#include <asm/mach-ralink/dev_gpio_leds.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */
#define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */
-#ifdef CONFIG_MTD_PARTITIONS
+#define DIR_300B_BUTTONS_POLL_INTERVAL 20
+
static struct mtd_partition dir_300b_partitions[] = {
{
.name = "u-boot",
}, {
.name = "kernel",
.offset = 0x050000,
- .size = 0x090000,
+ .size = 0x0d0000,
}, {
.name = "rootfs",
- .offset = 0x140000,
- .size = 0x2B0000,
+ .offset = 0x120000,
+ .size = 0x2e0000,
}, {
- .name = "openwrt",
+ .name = "firmware",
.offset = 0x050000,
- .size = 0x3a0000,
+ .size = 0x3b0000,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static struct physmap_flash_data dir_300b_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
.nr_parts = ARRAY_SIZE(dir_300b_partitions),
.parts = dir_300b_partitions,
-#endif
};
static struct gpio_led dir_300b_leds_gpio[] __initdata = {
{
- .name = "dir-300b:amber:status",
+ .name = "d-link:amber:status",
.gpio = DIR_300B_GPIO_LED_STATUS_AMBER,
.active_low = 1,
}, {
- .name = "dir-300b:green:status",
+ .name = "d-link:green:status",
.gpio = DIR_300B_GPIO_LED_STATUS_GREEN,
.active_low = 1,
}, {
- .name = "dir-300b:blue:wps",
+ .name = "d-link:blue:wps",
.gpio = DIR_300B_GPIO_LED_WPS,
.active_low = 1,
}
};
+static struct gpio_button dir_300b_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = DIR_300B_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = DIR_300B_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ }
+};
+
static void __init dir_300b_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_flash(0, &dir_300b_flash_data);
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+ rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
dir_300b_leds_gpio);
+ ramips_register_gpio_buttons(-1, DIR_300B_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_300b_gpio_buttons),
+ dir_300b_gpio_buttons);
+ rt305x_register_wifi();
+ rt305x_register_wdt();
}
-MIPS_MACHINE(RAMIPS_MACH_DIR_300_REVB, "D-Link DIR-300 revB", dir_300b_init);
+MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1",
+ dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_600_B1, "DIR-600-B1", "D-Link DIR-600 B1",
+ dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2",
+ dir_300b_init);