rt2800pci: add back ifdown hang workaround that was accidentally dropped during a...

[openwrt.git] / package / busybox / config / networking / Config.in

diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in
index 996afb4..481567c 100644 (file)
--- a/package/busybox/config/networking/Config.in
+++ b/package/busybox/config/networking/Config.in
@@ -5,18 +5,161 @@
 
 menu "Networking Utilities"
 
 
 menu "Networking Utilities"
 

+config BUSYBOX_CONFIG_NC
+       bool "nc"
+       default y
+       help
+         A simple Unix utility which reads and writes data across network
+         connections.
+
+config BUSYBOX_CONFIG_NC_SERVER
+       bool "Netcat server options (-l)"
+       default n
+       depends on BUSYBOX_CONFIG_NC
+       help
+         Allow netcat to act as a server.
+
+config BUSYBOX_CONFIG_NC_EXTRA
+       bool "Netcat extensions (-eiw and filename)"
+       default n
+       depends on BUSYBOX_CONFIG_NC
+       help
+         Add -e (support for executing the rest of the command line after
+         making or receiving a successful connection), -i (delay interval for
+         lines sent), -w (timeout for initial connection).
+
+config BUSYBOX_CONFIG_NC_110_COMPAT
+       bool "Netcat 1.10 compatibility (+2.5k)"
+       default n
+       depends on BUSYBOX_CONFIG_NC
+       help
+         This option makes nc closely follow original nc-1.10.
+         The code is about 2.5k bigger. It enables
+         -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
+         busybox-specific extensions: -f FILE and -ll.
+

 config BUSYBOX_CONFIG_FEATURE_IPV6
        bool "Enable IPv6 support"
        default y
        help
 config BUSYBOX_CONFIG_FEATURE_IPV6
        bool "Enable IPv6 support"
        default y
        help

-         Enable IPv6 support to busybox. This makes applets that talk IP
-         able to work with IPv6.
+         Enable IPv6 support in busybox.
+         This adds IPv6 support in the networking applets.
+
+config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
+       bool "Enable Unix domain socket support (usually not needed)"
+       default n
+       help
+         Enable Unix domain socket support in all busybox networking
+         applets.  Address of the form local:/path/to/unix/socket
+         will be recognized.
+
+         This extension is almost never used in real world usage.
+         You most likely want to say N.
+
+config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
+       bool "Prefer IPv4 addresses from DNS queries"
+       default y
+       depends on BUSYBOX_CONFIG_FEATURE_IPV6
+       help
+         Use IPv4 address of network host if it has one.
+
+         If this option is off, the first returned address will be used.
+         This may cause problems when your DNS server is IPv6-capable and
+         is returning IPv6 host addresses too. If IPv6 address
+         precedes IPv4 one in DNS reply, busybox network applets
+         (e.g. wget) will use IPv6 address. On an IPv6-incapable host
+         or network applets will fail to connect to the host
+         using IPv6 address.
+
+config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
+       bool "Verbose resolution errors"
+       default y
+       help
+         Enable if you are not satisfied with simplistic
+         "can't resolve 'hostname.com'" and want to know more.
+         This may increase size of your executable a bit.
+
+config BUSYBOX_CONFIG_ARP
+       bool "arp"
+       default n
+       help
+         Manipulate the system ARP cache.

 
 config BUSYBOX_CONFIG_ARPING
        bool "arping"
        default y
        help
 
 config BUSYBOX_CONFIG_ARPING
        bool "arping"
        default y
        help

-         Ping hosts by ARP packets
+         Ping hosts by ARP packets.
+
+config BUSYBOX_CONFIG_BRCTL
+       bool "brctl"
+       default y
+       help
+         Manage ethernet bridges.
+         Supports addbr/delbr and addif/delif.
+
+config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
+       bool "Fancy options"
+       default y
+       depends on BUSYBOX_CONFIG_BRCTL
+       help
+         Add support for extended option like:
+           setageing, setfd, sethello, setmaxage,
+           setpathcost, setportprio, setbridgeprio,
+           stp
+         This adds about 600 bytes.
+
+config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
+       bool "Support show"
+       default y
+       depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
+       help
+         Add support for option which prints the current config:
+           show
+
+config BUSYBOX_CONFIG_DNSD
+       bool "dnsd"
+       default n
+       help
+         Small and static DNS server daemon.
+
+config BUSYBOX_CONFIG_ETHER_WAKE
+       bool "ether-wake"
+       default n
+       help
+         Send a magic packet to wake up sleeping machines.
+
+config BUSYBOX_CONFIG_FAKEIDENTD
+       bool "fakeidentd"
+       default n
+       select BUSYBOX_CONFIG_FEATURE_SYSLOG
+       help
+         fakeidentd listens on the ident port and returns a predefined
+         fake value on any query.
+
+config BUSYBOX_CONFIG_FTPD
+       bool "ftpd"
+       default n
+       help
+         simple FTP daemon. You have to run it via inetd.
+
+config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
+       bool "Enable upload commands"
+       default n
+       depends on BUSYBOX_CONFIG_FTPD
+       help
+         Enable all kinds of FTP upload commands (-w option)
+
+config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
+       bool "Enable workaround for RFC-violating clients"
+       default n
+       depends on BUSYBOX_CONFIG_FTPD
+       help
+         Some ftp clients (among them KDE's Konqueror) issue illegal
+         "LIST -l" requests. This option works around such problems.
+         It might prevent you from listing files starting with "-" and
+         it increases the code size by ~40 bytes.
+         Most other ftp servers seem to behave similar to this.

 
 config BUSYBOX_CONFIG_FTPGET
        bool "ftpget"
 
 config BUSYBOX_CONFIG_FTPGET
        bool "ftpget"


@@ -30,54 +173,44 @@ config BUSYBOX_CONFIG_FTPPUT
        help
          Store a remote file via FTP.
 
        help
          Store a remote file via FTP.
 

+config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
+       bool "Enable long options in ftpget/ftpput"
+       default n
+       depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
+       help
+         Support long options for the ftpget/ftpput applet.
+

 config BUSYBOX_CONFIG_HOSTNAME
        bool "hostname"
        default n
        help
 config BUSYBOX_CONFIG_HOSTNAME
        bool "hostname"
        default n
        help

-         Show or set the system's host name
+         Show or set the system's host name.

 
 config BUSYBOX_CONFIG_HTTPD
        bool "httpd"
 
 config BUSYBOX_CONFIG_HTTPD
        bool "httpd"

-       default y
+       default n

        help
          Serve web pages via an HTTP server.
 
        help
          Serve web pages via an HTTP server.
 

-config BUSYBOX_CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
-       bool "  Support using httpd only from inetd"
+config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
+       bool "Support 'Ranges:' header"

        default n
        depends on BUSYBOX_CONFIG_HTTPD
        help
        default n
        depends on BUSYBOX_CONFIG_HTTPD
        help

-         This option disables uid and port options for the httpd applet
-         but requires inetd server daemon.
+         Makes httpd emit "Accept-Ranges: bytes" header and understand
+         "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
+         downloads, seeking in multimedia players etc.

 
 

-config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
-       bool "  Enable Basic http Authentication"
-       default y
-       depends on BUSYBOX_CONFIG_HTTPD
-       help
-         Utilizes password settings from /etc/httpd.conf for basic
-         authentication on a per url basis.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
-       bool "  Support MD5 crypted passwords for http Authentication"
-       default y
-       depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
-       help
-         Enables basic per url authentication from /etc/httpd.conf
-         using md5 passwords.
-
-
-if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
-config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
-       bool "  Support reloading the global config file using hup signal"
-       default y
+config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
+       bool "Use sendfile system call"
+       default n

        depends on BUSYBOX_CONFIG_HTTPD
        help
        depends on BUSYBOX_CONFIG_HTTPD
        help

-         This option enables processing of SIGHUP to reload cached
-         configuration settings.
+         When enabled, httpd will use the kernel sendfile() function
+         instead of read/write loop.

 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID

-       bool "  Enable support -u <user> option"
+       bool "Enable -u <user> option"

        default n
        depends on BUSYBOX_CONFIG_HTTPD
        help
        default n
        depends on BUSYBOX_CONFIG_HTTPD
        help


@@ -85,42 +218,85 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
          rather than defaulting to the user that starts the server.
          Use of this option requires special privileges to change to a
          different user.
          rather than defaulting to the user that starts the server.
          Use of this option requires special privileges to change to a
          different user.

-endif

 
 

-config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
-       bool "  Support loading additional MIME types at run-time"
-       default y
+config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+       bool "Enable Basic http Authentication"
+       default n

        depends on BUSYBOX_CONFIG_HTTPD
        help
        depends on BUSYBOX_CONFIG_HTTPD
        help

-         This option enables support for additional MIME types at
-         run-time to be specified in the configuration file.
+         Utilizes password settings from /etc/httpd.conf for basic
+         authentication on a per url basis.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
+       bool "Support MD5 crypted passwords for http Authentication"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+       help
+         Enables basic per URL authentication from /etc/httpd.conf
+         using md5 passwords.

 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI

-       bool "  Support Common Gateway Interface (CGI)"
-       default y
+       bool "Support Common Gateway Interface (CGI)"
+       default n

        depends on BUSYBOX_CONFIG_HTTPD
        help
          This option allows scripts and executables to be invoked
        depends on BUSYBOX_CONFIG_HTTPD
        help
          This option allows scripts and executables to be invoked

-         when specific urls are requested.
+         when specific URLs are requested.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+       bool "Support for running scripts through an interpreter"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+       help
+         This option enables support for running scripts through an
+         interpreter. Turn this on if you want PHP scripts to work
+         properly. You need to supply an additional line in your httpd
+         config file:
+         *.php:/path/to/your/php

 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV

-       bool "  Support the REMOTE_PORT environment variable for CGI"
-       default y
+       bool "Set REMOTE_PORT environment variable for CGI"
+       default n

        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        help
          Use of this option can assist scripts in generating
          references that contain a unique port number.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        help
          Use of this option can assist scripts in generating
          references that contain a unique port number.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR

-       bool "  Enable the -e option for shell script CGI simplification."
-       default y
+       bool "Enable -e option (useful for CGIs written as shell scripts)"
+       default n

        depends on BUSYBOX_CONFIG_HTTPD
        help
        depends on BUSYBOX_CONFIG_HTTPD
        help

-         After set, this option allows html encoding arbitrary
-         strings for display of the browser.  Output goes to stdout.
-         For example, httpd -e "<Hello World>" as
+         This option allows html encoding of arbitrary strings for display
+         by the browser. Output goes to stdout.
+         For example, httpd -e "<Hello World>" produces

          "&#60Hello&#32World&#62".
 
          "&#60Hello&#32World&#62".
 

+config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
+       bool "Support for custom error pages"
+       default n
+       depends on BUSYBOX_CONFIG_HTTPD
+       help
+         This option allows you to define custom error pages in
+         the configuration file instead of the default HTTP status
+         error pages. For instance, if you add the line:
+               E404:/path/e404.html
+         in the config file, the server will respond the specified
+         '/path/e404.html' file instead of the terse '404 NOT FOUND'
+         message.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
+       bool "Support for reverse proxy"
+       default n
+       depends on BUSYBOX_CONFIG_HTTPD
+       help
+         This option allows you to define URLs that will be forwarded
+         to another HTTP server. To setup add the following line to the
+         configuration file
+               P:/url/:http://hostname[:port]/new/path/
+         Then a request to /url/myfile will be forwarded to
+         http://hostname[:port]/new/path/myfile.
+

 config BUSYBOX_CONFIG_IFCONFIG
        bool "ifconfig"
        default y
 config BUSYBOX_CONFIG_IFCONFIG
        bool "ifconfig"
        default y


@@ -128,7 +304,7 @@ config BUSYBOX_CONFIG_IFCONFIG
          Ifconfig is used to configure the kernel-resident network interfaces.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
          Ifconfig is used to configure the kernel-resident network interfaces.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS

-       bool "  Enable status reporting output (+7k)"
+       bool "Enable status reporting output (+7k)"

        default y
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
        default y
        depends on BUSYBOX_CONFIG_IFCONFIG
        help


@@ -136,15 +312,15 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
          of the currently active interfaces.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
          of the currently active interfaces.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP

-       bool "  Enable slip-specific options \"keepalive\" and \"outfill\""
+       bool "Enable slip-specific options \"keepalive\" and \"outfill\""

        default n
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
        default n
        depends on BUSYBOX_CONFIG_IFCONFIG
        help

-         Allow "keepalive" and "outfill" support for SLIP.  If you're not
+         Allow "keepalive" and "outfill" support for SLIP. If you're not

          planning on using serial lines, leave this unchecked.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
          planning on using serial lines, leave this unchecked.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ

-       bool "  Enable options \"mem_start\", \"io_addr\", and \"irq\""
+       bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""

        default n
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
        default n
        depends on BUSYBOX_CONFIG_IFCONFIG
        help


@@ -152,40 +328,64 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
          and/or the interrupt line used by the specified device.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
          and/or the interrupt line used by the specified device.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW

-       bool "  Enable option \"hw\" (ether only)"
+       bool "Enable option \"hw\" (ether only)"

        default y
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
          Set the hardware address of this interface, if the device driver
        default y
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
          Set the hardware address of this interface, if the device driver

-         supports  this  operation.  Currently, we only support the 'ether'
+         supports  this  operation. Currently, we only support the 'ether'

          class.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
          class.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS

-       bool "  Set the broadcast automatically"
+       bool "Set the broadcast automatically"

        default y
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
          Setting this will make ifconfig attempt to find the broadcast
          automatically if the value '+' is used.
 
        default y
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
          Setting this will make ifconfig attempt to find the broadcast
          automatically if the value '+' is used.
 

+config BUSYBOX_CONFIG_IFENSLAVE
+       bool "ifenslave"
+       default n
+       help
+         Userspace application to bind several interfaces
+         to a logical interface (use with kernel bonding driver).
+
+config BUSYBOX_CONFIG_IFPLUGD
+       bool "ifplugd"
+       default n
+       help
+         Network interface plug detection daemon.
+

 config BUSYBOX_CONFIG_IFUPDOWN
        bool "ifupdown"
        default n
        help
 config BUSYBOX_CONFIG_IFUPDOWN
        bool "ifupdown"
        default n
        help

-         Activate or deactivate the specified interfaces.  This applet makes
+         Activate or deactivate the specified interfaces. This applet makes

          use of either "ifconfig" and "route" or the "ip" command to actually
          use of either "ifconfig" and "route" or the "ip" command to actually

-         configure network interfaces.  Therefore, you will probably also want
-         to enable either BUSYBOX_CONFIG_IFCONFIG and BUSYBOX_CONFIG_ROUTE, or enable
-         BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP and the various BUSYBOX_CONFIG_IP options.  Of
+         configure network interfaces. Therefore, you will probably also want
+         to enable either IFCONFIG and ROUTE, or enable
+         FEATURE_IFUPDOWN_IP and the various IP options. Of

          course you could use non-busybox versions of these programs, so
          against my better judgement (since this will surely result in plenty
          of support questions on the mailing list), I do not force you to
          course you could use non-busybox versions of these programs, so
          against my better judgement (since this will surely result in plenty
          of support questions on the mailing list), I do not force you to

-         enable these additional options.  It is up to you to supply either
-         "ifconfig" and "route" or the "ip" command, either via busybox or via
-         standalone utilities.
+         enable these additional options. It is up to you to supply either
+         "ifconfig", "route" and "run-parts" or the "ip" command, either
+         via busybox or via standalone utilities.
+
+config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
+       string "Absolute path to ifstate file"
+       default n
+       depends on BUSYBOX_CONFIG_IFUPDOWN
+       help
+         ifupdown keeps state information in a file called ifstate.
+         Typically it is located in /var/run/ifstate, however
+         some distributions tend to put it in other places
+         (debian, for example, uses /etc/network/run/ifstate).
+         This config option defines location of ifstate.

 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP

-       bool "  Use ip applet"
+       bool "Use ip applet"

        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help
        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help


@@ -193,7 +393,7 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
          than the default of using the older 'ifconfig' and 'route' utilities.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
          than the default of using the older 'ifconfig' and 'route' utilities.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN

-       bool "  Use busybox ip applet"
+       bool "Use busybox ip applet"

        default n
        depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
        select BUSYBOX_CONFIG_IP
        default n
        depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
        select BUSYBOX_CONFIG_IP


@@ -203,218 +403,257 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
        help
          Use the busybox iproute "ip" applet to implement "ifupdown".
 
        help
          Use the busybox iproute "ip" applet to implement "ifupdown".
 

-         If leave this disabled, you must install the full-blown iproute2
+         If left disabled, you must install the full-blown iproute2

          utility or the  "ifup" and "ifdown" applets will not work.
 
          utility or the  "ifup" and "ifdown" applets will not work.
 

-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
-       bool "  Use busybox ifconfig and route applets"
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+       bool "Use busybox ifconfig and route applets"

        default n
        default n

-       depends on BUSYBOX_CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP
+       depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP

        select BUSYBOX_CONFIG_IFCONFIG
        select BUSYBOX_CONFIG_ROUTE
        help
          Use the busybox iproute "ifconfig" and "route" applets to
          implement the "ifup" and "ifdown" utilities.
 
        select BUSYBOX_CONFIG_IFCONFIG
        select BUSYBOX_CONFIG_ROUTE
        help
          Use the busybox iproute "ifconfig" and "route" applets to
          implement the "ifup" and "ifdown" utilities.
 

-         If leave this disabled, you must install the full-blown ifconfig
+         If left disabled, you must install the full-blown ifconfig

          and route utilities, or the  "ifup" and "ifdown" applets will not
          work.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
          and route utilities, or the  "ifup" and "ifdown" applets will not
          work.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4

-       bool "  Enable support for IPv4"
+       bool "Support for IPv4"

        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help
        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help

-         If you want busybox to talk IPv4, leave this on.
+         If you want ifup/ifdown to talk IPv4, leave this on.

 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6

-       bool "  Enable support for IPv6"
+       bool "Support for IPv6"

        default n
        default n

-       depends on BUSYBOX_CONFIG_IFUPDOWN
+       depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6

        help
          If you need support for IPv6, turn this option on.
 
        help
          If you need support for IPv6, turn this option on.
 

-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX
-       bool "  Enable support for IPX"
-       default n
-       depends on BUSYBOX_CONFIG_IFUPDOWN
-       help
-         If this option is selected you can use busybox to work with IPX
-         networks.
+### UNUSED
+###config FEATURE_IFUPDOWN_IPX
+###    bool "Support for IPX"
+###    default y
+###    depends on IFUPDOWN
+###    help
+###      If this option is selected you can use busybox to work with IPX
+###      networks.

 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING

-       bool "  Enable mapping support"
+       bool "Enable mapping support"

        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help
          This enables support for the "mapping" stanza, unless you have
          a weird network setup you don't need it.
 
        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help
          This enables support for the "mapping" stanza, unless you have
          a weird network setup you don't need it.
 

+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
+       bool "Support for external dhcp clients"
+       default n
+       depends on BUSYBOX_CONFIG_IFUPDOWN
+       help
+         This enables support for the external dhcp clients. Clients are
+         tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+         Otherwise, if udhcpc applet is enabled, it is used.
+         Otherwise, ifup/ifdown will have no support for DHCP.
+

 config BUSYBOX_CONFIG_INETD
        bool "inetd"
        default n
 config BUSYBOX_CONFIG_INETD
        bool "inetd"
        default n

+       select BUSYBOX_CONFIG_FEATURE_SYSLOG

        help
          Internet superserver daemon
 
        help
          Internet superserver daemon
 

-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO
-       bool "  Support echo service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+       bool "Support echo service"

        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Echo received data internal inetd service
 
        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Echo received data internal inetd service
 

-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD
-       bool "  Support discard service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+       bool "Support discard service"

        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Internet /dev/null internal inetd service
 
        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Internet /dev/null internal inetd service
 

-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME
-       bool "  Support time service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
+       bool "Support time service"

        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Return 32 bit time since 1900 internal inetd service
 
        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Return 32 bit time since 1900 internal inetd service
 

-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME
-       bool "  Support daytime service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+       bool "Support daytime service"

        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Return human-readable time internal inetd service
 
        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Return human-readable time internal inetd service
 

-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN
-       bool "  Support chargen service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+       bool "Support chargen service"

        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Familiar character generator internal inetd service
 
        default n
        depends on BUSYBOX_CONFIG_INETD
        help
          Familiar character generator internal inetd service
 

+config BUSYBOX_CONFIG_FEATURE_INETD_RPC
+       bool "Support RPC services"
+       default n
+       depends on BUSYBOX_CONFIG_INETD
+       select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+       help
+         Support Sun-RPC based services

 
 config BUSYBOX_CONFIG_IP
        bool "ip"
        default n
        help
          The "ip" applet is a TCP/IP interface configuration and routing
 
 config BUSYBOX_CONFIG_IP
        bool "ip"
        default n
        help
          The "ip" applet is a TCP/IP interface configuration and routing

-         utility.  You generally don't need "ip" to use busybox with
+         utility. You generally don't need "ip" to use busybox with

          TCP/IP.
 
          TCP/IP.
 

-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPADDR
-       config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
-               default n
-       comment "  address (forced enabled for ipaddr)"
-endif
-if ! (CONFIG_IP && BUSYBOX_CONFIG_IPADDR)
-       config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
-               bool "  address"
-               default n
-               depends on BUSYBOX_CONFIG_IP
-               help
-                 Address manipulation support for the "ip" applet.
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPLINK
-       config BUSYBOX_CONFIG_FEATURE_IP_LINK
-               default n
-       comment "  link (forced enabled for iplink)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPLINK)
-       config BUSYBOX_CONFIG_FEATURE_IP_LINK
-               bool "  link"
-               default n
-               depends on BUSYBOX_CONFIG_IP
-               help
-                 Configure network devices with "ip".
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPROUTE
-       config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
-               default n
-       comment "  route (forced enabled for iproute)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPROUTE)
-       config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
-               bool "  route"
-               default n
-               depends on BUSYBOX_CONFIG_IP
-               help
-                 Add support for routing table management to "ip".
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL
-       config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
-               default n
-       comment "  tunnel (forced enabled for iptunnel)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL)
-       config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
-               bool "  tunnel"
-               default n
-               depends on BUSYBOX_CONFIG_IP
-               help
-                 Add support for tunneling commands to "ip".
-endif
+config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+       bool "ip address"
+       default n
+       depends on BUSYBOX_CONFIG_IP
+       help
+         Address manipulation support for the "ip" applet.
+
+config BUSYBOX_CONFIG_FEATURE_IP_LINK
+       bool "ip link"
+       default n
+       depends on BUSYBOX_CONFIG_IP
+       help
+         Configure network devices with "ip".

 
 

-config BUSYBOX_CONFIG_IPCALC
-       bool "ipcalc"
-       default y
+config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+       bool "ip route"
+       default n
+       depends on BUSYBOX_CONFIG_IP

        help
        help

-         ipcalc takes an IP address and netmask and calculates the
-         resulting broadcast, network, and host range.
+         Add support for routing table management to "ip".

 
 

-config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
-       bool "  Fancy IPCALC, more options, adds 1 kbyte"
-       default y
-       depends on BUSYBOX_CONFIG_IPCALC
+config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+       bool "ip tunnel"
+       default n
+       depends on BUSYBOX_CONFIG_IP

        help
        help

-         Adds the options hostname, prefix and silent to the output of "ipcalc".
+         Add support for tunneling commands to "ip".

 
 

-config BUSYBOX_CONFIG_IPADDR
-       bool "ipaddr"
+config BUSYBOX_CONFIG_FEATURE_IP_RULE
+       bool "ip rule"

        default n
        default n

+       depends on BUSYBOX_CONFIG_IP

        help
        help

-         Equivalent to selecting address support to "ip", above.
+         Add support for rule commands to "ip".

 
 

-config BUSYBOX_CONFIG_IPLINK
-       bool "iplink"
+config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
+       bool "Support short forms of ip commands"

        default n
        default n

+       depends on BUSYBOX_CONFIG_IP

        help
        help

-         Equivalent to selecting link support to "ip", above.
+         Also support short-form of ip <OBJECT> commands:
+         ip addr   -> ipaddr
+         ip link   -> iplink
+         ip route  -> iproute
+         ip tunnel -> iptunnel
+         ip rule   -> iprule

 
 

-config BUSYBOX_CONFIG_IPROUTE
-       bool "iproute"
+         Say N unless you desparately need the short form of the ip
+         object commands.
+
+config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
+       bool "Support displaying rarely used link types"

        default n
        default n

+       depends on BUSYBOX_CONFIG_IP

        help
        help

-         Equivalent to selecting route support to "ip", above.
+         If you are not going to use links of type "frad", "econet",
+         "bif" etc, you probably don't need to enable this.
+         Ethernet, wireless, infrared, ppp/slip, ip tunnelling
+         link types are supported without this option selected.
+
+config BUSYBOX_CONFIG_IPADDR
+       bool
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+
+config BUSYBOX_CONFIG_IPLINK
+       bool
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
+
+config BUSYBOX_CONFIG_IPROUTE
+       bool
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE

 
 config BUSYBOX_CONFIG_IPTUNNEL
 
 config BUSYBOX_CONFIG_IPTUNNEL

-       bool "iptunnel"
+       bool
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+
+config BUSYBOX_CONFIG_IPRULE
+       bool
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
+
+config BUSYBOX_CONFIG_IPCALC
+       bool "ipcalc"

        default n
        help
        default n
        help

-         Equivalent to selecting tunnel support to "ip", above.
+         ipcalc takes an IP address and netmask and calculates the
+         resulting broadcast, network, and host range.
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
+       bool "Fancy IPCALC, more options, adds 1 kbyte"
+       default n
+       depends on BUSYBOX_CONFIG_IPCALC
+       help
+         Adds the options hostname, prefix and silent to the output of
+         "ipcalc".
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
+       bool "Enable long options"
+       default n
+       depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS
+       help
+         Support long options for the ipcalc applet.

 
 config BUSYBOX_CONFIG_NAMEIF
        bool "nameif"
        default n
 
 config BUSYBOX_CONFIG_NAMEIF
        bool "nameif"
        default n

+       select BUSYBOX_CONFIG_FEATURE_SYSLOG

        help
          nameif is used to rename network interface by its MAC address.
          Renamed interfaces MUST be in the down state.
          It is possible to use a file (default: /etc/mactab)
          with list of new interface names and MACs.
        help
          nameif is used to rename network interface by its MAC address.
          Renamed interfaces MUST be in the down state.
          It is possible to use a file (default: /etc/mactab)
          with list of new interface names and MACs.

-         Maximum interface name length: IF_NAMESIZE = 16
+         Maximum interface name length: IFNAMSIZ = 16

          File fields are separated by space or tab.
          File format:
          # Comment
          File fields are separated by space or tab.
          File format:
          # Comment

-         new_interface_name    XX:XX:XX:XX:XX:XX
+         new_interface_name    XX:XX:XX:XX:XX:XX

 
 

-config BUSYBOX_CONFIG_NC
-       bool "nc"
-       default y
+config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
+       bool "Extended nameif"
+       default n
+       depends on BUSYBOX_CONFIG_NAMEIF

        help
        help

-         A simple Unix utility which reads and writes data across network
-         connections.
-         
+         This extends the nameif syntax to support the bus_info and driver
+         checks. The syntax is compatible to the normal nameif.
+         File format:
+           new_interface_name  driver=asix bus=usb-0000:00:08.2-3
+           new_interface_name  bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
+           new_interface_name  mac=00:80:C8:38:91:B5
+           new_interface_name  00:80:C8:38:91:B5
+

 config BUSYBOX_CONFIG_NETMSG
        bool "netmsg"
        default y
 config BUSYBOX_CONFIG_NETMSG
        bool "netmsg"
        default y


@@ -427,12 +666,42 @@ config BUSYBOX_CONFIG_NETSTAT
        help
          netstat prints information about the Linux networking subsystem.
 
        help
          netstat prints information about the Linux networking subsystem.
 

+config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
+       bool "Enable wide netstat output"
+       default y
+       depends on BUSYBOX_CONFIG_NETSTAT
+       help
+         Add support for wide columns. Useful when displaying IPv6 addresses
+         (-W option).
+
+config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
+       bool "Enable PID/Program name output"
+       default y
+       depends on BUSYBOX_CONFIG_NETSTAT
+       help
+         Add support for -p flag to print out PID and program name.
+         +700 bytes of code.
+

 config BUSYBOX_CONFIG_NSLOOKUP
        bool "nslookup"
        default y
        help
          nslookup is a tool to query Internet name servers.
 
 config BUSYBOX_CONFIG_NSLOOKUP
        bool "nslookup"
        default y
        help
          nslookup is a tool to query Internet name servers.
 

+config BUSYBOX_CONFIG_NTPD
+       bool "ntpd"
+       default n
+       help
+         The NTP client/server daemon.
+
+config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
+       bool "Make ntpd usable as a NTP server"
+       default n
+       depends on BUSYBOX_CONFIG_NTPD
+       help
+         Make ntpd usable as a NTP server. If you disable this option
+         ntpd will be usable only as a NTP client.
+

 config BUSYBOX_CONFIG_PING
        bool "ping"
        default y
 config BUSYBOX_CONFIG_PING
        bool "ping"
        default y


@@ -440,35 +709,57 @@ config BUSYBOX_CONFIG_PING
          ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
          elicit an ICMP ECHO_RESPONSE from a host or gateway.
 
          ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
          elicit an ICMP ECHO_RESPONSE from a host or gateway.
 

-config BUSYBOX_CONFIG_FEATURE_FANCY_PING
-       bool "  Enable fancy ping output"
-       default y
-       depends on BUSYBOX_CONFIG_PING
-       help
-         Make the output from the ping applet include statistics, and at the
-         same time provide full support for ICMP packets.
-

 config BUSYBOX_CONFIG_PING6
        bool "ping6"
        default y
 config BUSYBOX_CONFIG_PING6
        bool "ping6"
        default y

-       depends on BUSYBOX_CONFIG_FEATURE_IPV6
+       depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING

        help
          This will give you a ping that can talk IPv6.
 
        help
          This will give you a ping that can talk IPv6.
 

-config BUSYBOX_CONFIG_FEATURE_FANCY_PING6
-       bool "  Enable fancy ping6 output"
+config BUSYBOX_CONFIG_FEATURE_FANCY_PING
+       bool "Enable fancy ping output"

        default y
        default y

-       depends on BUSYBOX_CONFIG_PING6
+       depends on BUSYBOX_CONFIG_PING

        help
        help

-         Make the output from the ping6 applet include statistics, and at the
+         Make the output from the ping applet include statistics, and at the

          same time provide full support for ICMP packets.
 
          same time provide full support for ICMP packets.
 

+config BUSYBOX_CONFIG_PSCAN
+       bool "pscan"
+       default n
+       help
+         Simple network port scanner.
+

 config BUSYBOX_CONFIG_ROUTE
        bool "route"
        default y
        help
          Route displays or manipulates the kernel's IP routing tables.
 
 config BUSYBOX_CONFIG_ROUTE
        bool "route"
        default y
        help
          Route displays or manipulates the kernel's IP routing tables.
 

+config BUSYBOX_CONFIG_SLATTACH
+       bool "slattach"
+       default n
+       help
+         slattach is a small utility to attach network interfaces to serial
+         lines.
+
+#config TC
+#      bool "tc"
+#      default y
+#      help
+#        show / manipulate traffic control settings
+#
+#config FEATURE_TC_INGRESS
+#      def_bool n
+#      depends on TC
+
+config BUSYBOX_CONFIG_TCPSVD
+       bool "tcpsvd"
+       default n
+       help
+         tcpsvd listens on a TCP port and runs a program for each new
+         connection.
+

 config BUSYBOX_CONFIG_TELNET
        bool "telnet"
        default y
 config BUSYBOX_CONFIG_TELNET
        bool "telnet"
        default y


@@ -477,16 +768,16 @@ config BUSYBOX_CONFIG_TELNET
          used to test other simple protocols.
 
 config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
          used to test other simple protocols.
 
 config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE

-       bool "  Pass TERM type to remote host"
+       bool "Pass TERM type to remote host"

        default y
        depends on BUSYBOX_CONFIG_TELNET
        help
          Setting this option will forward the TERM environment variable to the
        default y
        depends on BUSYBOX_CONFIG_TELNET
        help
          Setting this option will forward the TERM environment variable to the

-         remote host you are connecting to.  This is useful to make sure that
+         remote host you are connecting to. This is useful to make sure that

          things like ANSI colors and other control sequences behave.
 
 config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
          things like ANSI colors and other control sequences behave.
 
 config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN

-       bool "  Pass USER type to remote host"
+       bool "Pass USER type to remote host"

        default n
        depends on BUSYBOX_CONFIG_TELNET
        help
        default n
        depends on BUSYBOX_CONFIG_TELNET
        help


@@ -498,20 +789,20 @@ config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
 config BUSYBOX_CONFIG_TELNETD
        bool "telnetd"
        default y
 config BUSYBOX_CONFIG_TELNETD
        bool "telnetd"
        default y

-       #select BUSYBOX_CONFIG_LOGIN
+       select BUSYBOX_CONFIG_FEATURE_SYSLOG

        help
          A daemon for the TELNET protocol, allowing you to log onto the host
        help
          A daemon for the TELNET protocol, allowing you to log onto the host

-         running the daemon.  Please keep in mind that the TELNET protocol
-         sends passwords in plain text.  If you can't afford the space for an
-         SSH daemon and you trust your network, you may say 'y' here.  As a
+         running the daemon. Please keep in mind that the TELNET protocol
+         sends passwords in plain text. If you can't afford the space for an
+         SSH daemon and you trust your network, you may say 'y' here. As a

          more secure alternative, you should seriously consider installing the
          very small Dropbear SSH daemon instead:
                http://matt.ucc.asn.au/dropbear/dropbear.html
 
          Note that for busybox telnetd to work you need several things:
          First of all, your kernel needs:
          more secure alternative, you should seriously consider installing the
          very small Dropbear SSH daemon instead:
                http://matt.ucc.asn.au/dropbear/dropbear.html
 
          Note that for busybox telnetd to work you need several things:
          First of all, your kernel needs:

-                 BUSYBOX_CONFIG_UNIX98_PTYS=y
-                 BUSYBOX_CONFIG_DEVPTS_FS=y
+                 UNIX98_PTYS=y
+                 DEVPTS_FS=y

 
          Next, you need a /dev/pts directory on your root filesystem:
 
 
          Next, you need a /dev/pts directory on your root filesystem:
 


@@ -528,8 +819,8 @@ config BUSYBOX_CONFIG_TELNETD
 
                  mount -t devpts devpts /dev/pts
 
 
                  mount -t devpts devpts /dev/pts
 

-         You need to be sure that Busybox has BUSYBOX_CONFIG_LOGIN and
-         BUSYBOX_CONFIG_FEATURE_SUID enabled.  And finally, you should make
+         You need to be sure that Busybox has LOGIN and
+         FEATURE_SUID enabled. And finally, you should make

          certain that Busybox has been installed setuid root:
 
                chown root.root /bin/busybox
          certain that Busybox has been installed setuid root:
 
                chown root.root /bin/busybox


@@ -538,68 +829,167 @@ config BUSYBOX_CONFIG_TELNETD
          with all that done, telnetd _should_ work....
 
 
          with all that done, telnetd _should_ work....
 
 

-config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD
-       bool "  Support call from inetd only"
-       default n
+config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
+       bool "Support standalone telnetd (not inetd only)"
+       default y

        depends on BUSYBOX_CONFIG_TELNETD
        help
        depends on BUSYBOX_CONFIG_TELNETD
        help

-         Selecting this will make telnetd only callable from inetd,
-         removing the standalone support.
+         Selecting this will make telnetd able to run standalone.
+
+config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
+       bool "Support -w SEC option (inetd wait mode)"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
+       help
+         This option allows you to run telnetd in "inet wait" mode.
+         Example inetd.conf line (note "wait", not usual "nowait"):
+
+         telnet stream tcp wait root /bin/telnetd telnetd -w10
+
+         In this example, inetd passes _listening_ socket_ as fd 0
+         to telnetd when connection appears.
+         telnetd will wait for connections until all existing
+         connections are closed, and no new connections
+         appear during 10 seconds. Then it exits, and inetd continues
+         to listen for new connections.
+
+         This option is rarely used. "tcp nowait" is much more usual
+         way of running tcp services, including telnetd.
+         You most probably want to say N here.

 
 config BUSYBOX_CONFIG_TFTP
        bool "tftp"
        default n
        help
 
 config BUSYBOX_CONFIG_TFTP
        bool "tftp"
        default n
        help

-         This enables the Trivial File Transfer Protocol client program.  TFTP
+         This enables the Trivial File Transfer Protocol client program. TFTP

          is usually used for simple, small transfers such as a root image
          for a network-enabled bootloader.
 
          is usually used for simple, small transfers such as a root image
          for a network-enabled bootloader.
 

+config BUSYBOX_CONFIG_TFTPD
+       bool "tftpd"
+       default n
+       help
+         This enables the Trivial File Transfer Protocol server program.
+         It expects that stdin is a datagram socket and a packet
+         is already pending on it. It will exit after one transfer.
+         In other words: it should be run from inetd in nowait mode,
+         or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+
+comment "Common options for tftp/tftpd"
+       depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+

 config BUSYBOX_CONFIG_FEATURE_TFTP_GET
 config BUSYBOX_CONFIG_FEATURE_TFTP_GET

-       bool "  Enable \"get\" command"
+       bool "Enable 'tftp get' and/or tftpd upload code"

        default n
        default n

-       depends on BUSYBOX_CONFIG_TFTP
+       depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD

        help
        help

-         Add support for the GET command within the TFTP client.  This allows
+         Add support for the GET command within the TFTP client. This allows

          a client to retrieve a file from a TFTP server.
          a client to retrieve a file from a TFTP server.

+         Also enable upload support in tftpd, if tftpd is selected.
+
+         Note: this option does _not_ make tftpd capable of download
+         (the usual operation people need from it)!

 
 config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
 
 config BUSYBOX_CONFIG_FEATURE_TFTP_PUT

-       bool "  Enable \"put\" command"
+       bool "Enable 'tftp put' and/or tftpd download code"

        default n
        default n

-       depends on BUSYBOX_CONFIG_TFTP
+       depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD

        help
        help

-         Add support for the PUT command within the TFTP client.  This allows
+         Add support for the PUT command within the TFTP client. This allows

          a client to transfer a file to a TFTP server.
          a client to transfer a file to a TFTP server.

+         Also enable download support in tftpd, if tftpd is selected.

 
 config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
 
 config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE

-       bool "  Enable \"blocksize\" command"
+       bool "Enable 'blksize' and 'tsize' protocol options"

        default n
        default n

-       depends on BUSYBOX_CONFIG_TFTP
+       depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD

        help
        help

-         Allow the client to specify the desired block size for transfers.
+         Allow tftp to specify block size, and tftpd to understand
+         "blksize" and "tsize" options.

 
 

-config BUSYBOX_CONFIG_FEATURE_TFTP_DEBUG
-       bool "  Enable debug"
+config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
+       bool "Enable tftp progress meter"

        default n
        default n

-       depends on BUSYBOX_CONFIG_TFTP
+       depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE

        help
        help

-         Enable debug settings for tftp.  This is useful if you're running
-         into problems with tftp as the protocol doesn't help you much when
-         you run into problems.
+         Show progress bar.
+
+config BUSYBOX_CONFIG_TFTP_DEBUG
+       bool "Enable debug"
+       default n
+       depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+       help
+         Make tftp[d] print debugging messages on stderr.
+         This is useful if you are diagnosing a bug in tftp[d].

 
 config BUSYBOX_CONFIG_TRACEROUTE
        bool "traceroute"
        default y
        help
 
 config BUSYBOX_CONFIG_TRACEROUTE
        bool "traceroute"
        default y
        help

-         Utility to trace the route of IP packets
+         Utility to trace the route of IP packets.
+
+config BUSYBOX_CONFIG_TRACEROUTE6
+       bool "traceroute6"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE
+       help
+         Utility to trace the route of IPv6 packets.

 
 config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
 
 config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE

-       bool "  Enable verbose output"
+       bool "Enable verbose output"

        default y
        depends on BUSYBOX_CONFIG_TRACEROUTE
        help
        default y
        depends on BUSYBOX_CONFIG_TRACEROUTE
        help

-         Add some verbosity to traceroute.  This includes amongst other things
+         Add some verbosity to traceroute. This includes among other things

          hostnames and ICMP response types.
 
          hostnames and ICMP response types.
 

+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
+       bool "Enable loose source route"
+       default n
+       depends on BUSYBOX_CONFIG_TRACEROUTE
+       help
+         Add option to specify a loose source route gateway
+         (8 maximum).
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
+       bool "Use ICMP instead of UDP"
+       default n
+       depends on BUSYBOX_CONFIG_TRACEROUTE
+       help
+         Add option -I to use ICMP ECHO instead of UDP datagrams.
+
+config BUSYBOX_CONFIG_TUNCTL
+       bool "tunctl"
+       default n
+       help
+         tunctl creates or deletes tun devices.
+
+config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
+       bool "Support owner:group assignment"
+       default n
+       depends on BUSYBOX_CONFIG_TUNCTL
+       help
+         Allow to specify owner and group of newly created interface.
+         340 bytes of pure bloat. Say no here.
+
+source package/busybox/config/networking/udhcp/Config.in
+
+config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
+       string "ifup udhcpc command line options"
+       default "-R -n"
+       depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC
+       help
+         Command line options to pass to udhcpc from ifup.
+         Intended to alter options not available in /etc/network/interfaces.
+         (IE: --syslog --background etc...)
+
+config BUSYBOX_CONFIG_UDPSVD
+       bool "udpsvd"
+       default n
+       help
+         udpsvd listens on an UDP port and runs a program for each new
+         connection.
+

 config BUSYBOX_CONFIG_VCONFIG
        bool "vconfig"
        default y
 config BUSYBOX_CONFIG_VCONFIG
        bool "vconfig"
        default y


@@ -614,27 +1004,36 @@ config BUSYBOX_CONFIG_WGET
          HTTPS, and FTP servers.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
          HTTPS, and FTP servers.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR

-       bool "  Enable a nifty process meter (+2k)"
+       bool "Enable a nifty process meter (+2k)"

        default y
        depends on BUSYBOX_CONFIG_WGET
        help
          Enable the transfer progress bar for wget transfers.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
        default y
        depends on BUSYBOX_CONFIG_WGET
        help
          Enable the transfer progress bar for wget transfers.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION

-       bool "  Enable HTTP authentication"
+       bool "Enable HTTP authentication"

        default y
        depends on BUSYBOX_CONFIG_WGET
        help
          Support authenticated HTTP transfers.
 
        default y
        depends on BUSYBOX_CONFIG_WGET
        help
          Support authenticated HTTP transfers.
 

-config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL
-       bool "  Enable IPv6 literal addresses"
+config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
+       bool "Enable long options"

        default y
        default y

-       depends on BUSYBOX_CONFIG_WGET
+       depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS

        help
        help

-         Support IPv6 address literal notation in URLs.
+         Support long options for the wget applet.

 
 

-source package/busybox/config/networking/udhcp/Config.in
+config BUSYBOX_CONFIG_ZCIP
+       bool "zcip"
+       default n
+       select BUSYBOX_CONFIG_FEATURE_SYSLOG
+       help
+         ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+         It's a daemon that allocates and defends a dynamically assigned
+         address on the 169.254/16 network, requiring no system administrator.

 
 

-endmenu
+         See http://www.zeroconf.org for further details, and "zcip.script"
+         in the busybox examples.

 
 

+endmenu