ramips: rt305x: merge duplicated mac address setup

[openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index e58accd..65c49e0 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -2,126 +2,135 @@
 
 . /etc/functions.sh
 . /lib/ramips.sh
 
 . /etc/functions.sh
 . /lib/ramips.sh

+. /lib/functions/uci-defaults.sh

 
 if [ ! -x /usr/sbin/maccalc ]; then
        echo "$0: maccalc not found!"
        return
 fi
 
 
 if [ ! -x /usr/sbin/maccalc ]; then
        echo "$0: maccalc not found!"
        return
 fi
 

-create_lan_wan()
+ramips_setup_interfaces()

 {
 {

-       uci batch <<EOF
-set network.lan.ifname=eth0.1
-set network.wan=interface
-set network.wan.ifname=eth0.2
-set network.wan.proto=dhcp
-commit network
-EOF
-}
+       local board="$1"

 
 

-get_mac_binary()
-{
-       local mtdname="$1"
-       local seek="$2"
-       local part
+       ucidef_set_interface_loopback

 
 

-       part=$(find_mtd_part "$mtdname")
-       if [ -z "$part" ]; then
-               echo "get_mac_binary: partition $mtdname not found!" >&2
-               return
-       fi
+       case $board in
+       all0256n)
+               ucidef_set_interface_lan "eth0.1"
+               ;;

 
 

-       dd bs=1 skip=$seek count=6 if=$part 2>/dev/null | /usr/sbin/maccalc bin2mac
-}
+       argus-atp52b | \
+       b2c | \
+       nw718 | \
+       w502u)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ;;

 
 

-get_mac_nvram()
-{
-       local mtdname="$1"
-       local key="$2"
-       local part
-       local mac_dirty
-
-       part=$(find_mtd_part "$mtdname")
-       if [ -z "$part" ]; then
-               echo "get_mac_nvram: partition $mtdname not found!" >&2
-               return
-       fi
-
-       mac_dirty=$(strings "$part" | sed -n 's/'"$key"'=//p')
-       # "canonicalize" mac
-       maccalc add "$mac_dirty" 0
-}
+       f5d8235-v1 | \
+       rt-n15)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "rtl8366s" "1" "1"
+               ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
+               ;;

 
 

-set_macs()
-{
-       local lan_mac="$1"
-       local wan_mac="$2"
+       f5d8235-v2 | \
+       wl-351)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "rtl8366rb" "1" "1"
+               ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
+               ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
+               ;;

 
 

-       echo "Setting LAN mac address to: $lan_mac" >&2
-       echo "Setting WAN mac address to: $wan_mac" >&2
+       wcr-150gn)
+               ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
+               ;;
+
+       wli-tx4-ag300n)
+               ucidef_set_interface_lan "eth0"
+               ;;

 
 

-       uci batch <<EOF
-set network.lan.macaddr='$lan_mac'
-set network.wan.macaddr='$wan_mac'
-commit network
-EOF
+       *)
+               RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
+               if [ -n "${RT3X5X}" ]; then
+                       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               else
+                       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               fi
+               ;;
+       esac

 }
 
 }
 

-set_macs_only_lan()
+ramips_setup_macs()

 {
 {

-       local lan_mac="$1"
-       local wan_mac
+       local board="$1"
+       local lan_mac=""
+       local wan_mac=""

 
 

-       wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+       case $board in
+       all0256n)
+               lan_mac=$(ramips_get_mac_binary factory 40)
+               ;;

 
 

-       set_macs "$lan_mac" "$wan_mac"
-}
+       argus-atp52b | \
+       b2c | \
+       f5d8235-v1 | \
+       nw718 | \
+       rt-n15 | \
+       wl-351)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;

 
 

-set_macs_only_lan_from_mtd()
-{
-       local mtdname="$1"
-       local seek="$2"
-       local lan_mac
+       dir-300-b1 |\
+       dir-300-b2 |\
+       dir-600-b1)
+               lan_mac=$(ramips_get_mac_binary devdata 16388)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;

 
 

-       lan_mac=$(get_mac_binary "$mtdname" "$seek")
-       if [ -z $lan_mac ]; then
-               echo "set_macs_only_lan_from_mtd: can't extract mac address from $part" >&2
-               return
-       fi
+       esr-9753 | \
+       nbg-419n | \
+       wcr-150gn)
+                lan_mac=$(ramips_get_mac_binary factory 4)
+                wan_mac=$(ramips_get_mac_binary factory 40)
+               ;;

 
 

-       set_macs_only_lan "$lan_mac"
-}
+       f5d8235-v2)
+               lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;

 
 

-set_macs_only_lan_from_nvram()
-{
-       local mtdname="$1"
-       local key="$2"
-       local lan_mac
+       w502u)
+                lan_mac=$(ramips_get_mac_binary factory 40)
+                wan_mac=$(ramips_get_mac_binary factory 46)
+               ;;
+
+       wl341v3)
+               lan_mac=$(ramips_get_mac_binary board-nvram 65440)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;

 
 

-       lan_mac=$(get_mac_nvram "$mtdname" "$key")
-       if [ -z $lan_mac ]; then
-               echo "set_macs_only_lan_from_nvram: can't extract mac address from $part" >&2
-               return
-       fi
+       wli-tx4-ag300n)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               ;;
+
+       esac

 
 

-       set_macs_only_lan "$lan_mac"
+       [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
+       [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac

 }
 
 }
 

+[ -e /etc/config/network ] && exit 0
+
+touch /etc/config/network
+

 board=$(ramips_board_name)
 
 board=$(ramips_board_name)
 

-case $board in
-       f5d8235-v2)
-               create_lan_wan
-               set_macs_only_lan_from_mtd "u-boot" 262148
-               ;;
-       argus-atp52b | \
-       b2c | \
-       nw718)
-               create_lan_wan
-               set_macs_only_lan_from_mtd "factory" 4
-               ;;
-       *)
-               RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
-               [ -z "${RT3X5X}" ] || create_lan_wan
-               ;;
-esac
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+
+uci commit network
+
+exit 0