[cobalt] add support for 2.6.35

[openwrt.git] / Config.in

diff --git a/Config.in b/Config.in
index d1d66ff..c750a25 100644 (file)
--- a/Config.in
+++ b/Config.in
@@ -1,3 +1,7 @@
+# Copyright (C) 2006-2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.

 #
 
 mainmenu "OpenWrt Configuration"
 #
 
 mainmenu "OpenWrt Configuration"


@@ -8,94 +12,399 @@ config HAVE_DOT_CONFIG
 
 source "target/Config.in"
 
 
 source "target/Config.in"
 

-config ALL
-       bool "Select all packages by default"
-       default n
+menu "Target Images"

 
 

-menuconfig DEVEL
-       bool "Advanced configuration options (for developers)"
-       default n
-       select BUILDOPTS
-       select TOOLCHAINOPTS if !NATIVE_TOOLCHAIN
+       menuconfig TARGET_ROOTFS_INITRAMFS
+               bool "ramdisk"
+               default y if USES_INITRAMFS
+               depends LINUX_2_6
+               help
+                 Embed the rootfs into the kernel (initramfs)

 
 

-config BROKEN
-       bool "Show broken platforms / packages" if DEVEL
-       default n
+               choice
+                       prompt "Compression"
+                       default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
+                       default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
+                       default TARGET_INITRAMFS_COMPRESSION_NONE
+                       depends TARGET_ROOTFS_INITRAMFS
+                       depends !LINUX_2_6_25
+                       help
+                         Select ramdisk compression.

 
 

-menuconfig BUILDOPTS
-       bool "Build Options" if DEVEL
+                       config TARGET_INITRAMFS_COMPRESSION_NONE
+                               bool "none"

 
 

-config AUTOREBUILD
-       bool
-       prompt "Automatic rebuild of packages" if BUILDOPTS
-       default y
-       help
-               Automatically rebuild packages when their files change
+                       config TARGET_INITRAMFS_COMPRESSION_GZIP
+                               bool "gzip"

 
 

-config TAR_VERBOSITY
-       bool 
-       prompt "Tar verbose" if BUILDOPTS
-       default n
+                       config TARGET_INITRAMFS_COMPRESSION_BZIP2
+                               bool "bzip2"

 
 

-config JLEVEL
-       int
-       prompt "Number of jobs to run simultaneously" if BUILDOPTS
-       default "1"
-       help
-           Number of jobs to run simultanesouly
+                       config TARGET_INITRAMFS_COMPRESSION_LZMA
+                               bool "lzma"

 
 

-config CCACHE
-       bool
-       prompt "Use ccache" if BUILDOPTS
-       default n
-       help
-               Compiler cache; see http://ccache.samba.org/
+                       config TARGET_INITRAMFS_COMPRESSION_LZO
+                               bool "lzo"
+               endchoice

 
 

-source "toolchain/Config.in"
-source "target/sdk/Config.in"
+       comment "Root filesystem archives"

 
 

-menu "Target Images"
-       config TARGET_ROOTFS_INITRAMFS
-               bool "ramdisk"
+       config TARGET_ROOTFS_CPIOGZ
+               bool "cpio.gz"
+               default y if USES_CPIOGZ
+               help
+                 Build a compressed cpio archive of the the root filesystem
+
+       config TARGET_ROOTFS_TARGZ
+               bool "tar.gz"
+               default y if USES_TARGZ
+               help
+                 Build a compressed tar archive of the the root filesystem
+
+       comment "Root filesystem images"
+
+       config TARGET_ROOTFS_EXT2FS
+               bool "ext2"
+               default y if USES_EXT2
+               depends !TARGET_ROOTFS_INITRAMFS
+               help
+                 Ext2 file system with some free space for uml images
+
+       config TARGET_ROOTFS_ISO
+               bool "iso"

                default n
                default n

-               depends LINUX_2_6
+               depends TARGET_ROOTFS_INITRAMFS && TARGET_x86

                help
                help

-                 Embed the rootfs into the kernel (initramfs)
+                 Create some bootable ISO image

 
        config TARGET_ROOTFS_JFFS2
                bool "jffs2"
 
        config TARGET_ROOTFS_JFFS2
                bool "jffs2"

-               default y
+               default y if USES_JFFS2

                depends !TARGET_ROOTFS_INITRAMFS
                help
                  Build a jffs2 root filesystem
 
        config TARGET_ROOTFS_SQUASHFS
                bool "squashfs"
                depends !TARGET_ROOTFS_INITRAMFS
                help
                  Build a jffs2 root filesystem
 
        config TARGET_ROOTFS_SQUASHFS
                bool "squashfs"

-               default y
-               depends !LINUX_2_6_ARUBA
-               depends !LINUX_2_6_XSCALE
+               default y if USES_SQUASHFS

                depends !TARGET_ROOTFS_INITRAMFS
                depends !TARGET_ROOTFS_INITRAMFS

-               depends !LINUX_2_6_AU1000

                help
                  Build a squashfs-lzma root filesystem
 
                help
                  Build a squashfs-lzma root filesystem
 

-       config TARGET_ROOTFS_TGZ
-               bool "tgz"
-               default y if !LINUX_2_4_BRCM && !LINUX_2_6_BRCM && !LINUX_2_6_ARUBA && !LINUX_2_4_AR531X
-               depends !TARGET_ROOTFS_INITRAMFS
+       config TARGET_ROOTFS_UBIFS
+               bool "ubifs"
+               default y if USES_UBIFS
+               depends !TARGET_ROOTFS_INITRAMFS && USES_UBIFS

                help
                help

-                 Build a compressed tar archive of the the root filesystem
-                 
-       config TARGET_ROOTFS_EXT2FS
-               bool "ext2"
-               default y if LINUX_2_6_UML
-               depends !TARGET_ROOTFS_INITRAMFS
+                 Build a ubifs root filesystem
+
+       comment "Image Options"
+
+       source "target/linux/*/image/Config.in"
+
+       config TARGET_ROOTFS_PARTSIZE
+               int "Root filesystem partition size (in MB)"
+               depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT2FS || TARGET_rb532
+               default 48

                help
                help

-                 Ext2 file system with some free space for uml images
+                   Allows you to change the root filesystem partition size
+
+       config TARGET_ROOTFS_MAXINODE
+               int "Maximum number of inodes in root filesystem"
+               depends TARGET_ROOTFS_EXT2FS
+               default 6000
+               help
+                   Allows you to change the maximum number of inodes in the root filesystem
+
+endmenu
+
+menu "Global build settings"
+
+       config ALL
+               bool "Select all packages by default"
+               default n
+
+       comment "General build options"
+
+       config BUILD_PATENTED
+               default y
+               bool "Compile with support for patented functionality"
+               help
+                 When this option is disabled, software which provides patented functionality will not be built.
+                 In case software provides optional support for patented functionality,
+                 this optional support will get disabled for this package.
+
+       config LARGEFILE
+               bool
+               prompt "Enable large file (files > 2 GB) support"
+               default y
+               help
+                 Enable large file (files > 2 GB) support.
+
+       config SHADOW_PASSWORDS
+               bool
+               prompt "Enable shadow password support"
+               default y
+               help
+                 Enable shadow password support.
+
+       config CLEAN_IPKG
+               bool
+               prompt "Remove ipkg/opkg status data files in final images"
+               default n
+               help
+                       This removes all ipkg/opkg status data files from the target directory before building the root fs
+
+       config COLLECT_KERNEL_DEBUG
+               bool
+               prompt "Collect kernel debug information"
+               select KERNEL_DEBUG_INFO
+               default n
+               help
+                       This collects debugging symbols from the kernel and all compiled modules.
+                       Useful for release builds, so that kernel issues can be debugged offline later.
+
+       comment "Kernel build options"
+
+       config KERNEL_DEBUG_FS
+               bool "Compile the kernel with Debug FileSystem enabled"
+               default y
+               depends LINUX_2_6
+               help
+                 debugfs is a virtual file system that kernel developers use to put
+                 debugging files into. Enable this option to be able to read and
+                 write to these files.
+
+       config KERNEL_PROFILING
+               bool "Compile the kernel with profiling enabled"
+               default n
+               help
+                 Enable the extended profiling support mechanisms used by profilers such
+                 as OProfile.
+
+       config KERNEL_KALLSYMS
+               bool "Compile the kernel with symbol table information"
+               default n
+               help
+                 This will give you more information in stack traces from kernel oopses
+
+       config KERNEL_DEBUG_KERNEL
+               bool
+               default n
+
+       config KERNEL_DEBUG_INFO
+               bool "Compile the kernel with debug information"
+               default n
+               select KERNEL_DEBUG_KERNEL
+               help
+                 This will compile your kernel and modules with debug information.
+
+       comment "Package build options"
+
+       config DEBUG
+               bool
+               prompt "Compile packages with debugging info"
+               default n
+               help
+                 Adds -g3 to the CFLAGS
+
+       config IPV6
+               bool
+               prompt "Enable IPv6 support in packages"
+               default y
+               help
+                 Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
+
+       config PKG_BUILD_PARALLEL
+               bool
+               prompt "Compile certain packages parallelized"
+               default n
+               help
+                 This adds a -jX option to certain packages that are known to
+                 behave well for parallel build.

 
 

+                 Note that this may overcommit CPU resources depending on the
+                 -j level of the main make process, the number of package
+                 submake jobs selected below and the number of actual CPUs present.
+                 Example: If the main make is passed a -j4 and the submake -j
+                 is also set to 4, we may end up with 16 parallel make processes
+                 in the worst case.
+
+                 You get maximum build performance, if you set the package build
+                 jobs to the number of CPUs (cores) available and also start the main
+                 make process with -jX, where X is the number of CPUs (cores).
+                 However, make sure you have enough RAM available for
+                 NR_CPUS to the power of two (NR_CPUS^2) make jobs.
+
+                 If you are unsure, select N.
+
+       config PKG_BUILD_JOBS
+               int
+               prompt "Number of package submake jobs (2-512)"
+               range 2 512
+               default 2
+               depends on PKG_BUILD_PARALLEL
+               help
+                 The number of jobs (-jX) to pass to packages submake.
+
+       config PKG_DEFAULT_PARALLEL
+               bool
+               prompt "Always parallelize the default package build rule (Dangerous)"
+               depends on PKG_BUILD_PARALLEL
+               default n
+               help
+                 Always set the default package build rules to parallel build.
+
+                 WARNING: This may break build or kill your cat, as it builds
+                 packages with multiple jobs that are probably not tested in
+                 a parallel build environment.
+
+                 Say N. Only say Y for testing.
+
+       comment "Stripping options"
+
+       choice
+               prompt "Binary stripping method"
+               default USE_STRIP   if EXTERNAL_TOOLCHAIN
+               default USE_STRIP   if USE_GLIBC || USE_EGLIBC
+               default USE_SSTRIP
+               help
+                 Select the binary stripping method you wish to use.
+
+               config NO_STRIP
+                       bool "none"
+                       help
+                         This will install unstripped binaries (useful for native compiling/debugging)
+
+               config USE_STRIP
+                       bool "strip"
+                       help
+                         This will install binaries stripped using strip from binutils
+
+
+               config USE_SSTRIP
+                       bool "sstrip"
+                       depends !DEBUG
+                       depends !USE_GLIBC
+                       depends !USE_EGLIBC
+                       help
+                         This will install binaries stripped using sstrip
+       endchoice
+
+       config STRIP_ARGS
+               string
+               prompt "Strip arguments"
+               depends USE_STRIP
+               default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG
+               default "--strip-all"
+               help
+                 Specifies arguments passed to the strip command when stripping binaries
+
+       config STRIP_KERNEL_EXPORTS
+               depends LINUX_2_6
+               bool "Strip unnecessary exports from the kernel image"
+               help
+                 Reduces kernel size by stripping unused kernel exports from the kernel image
+                 Note that this might make the kernel incompatible with any kernel modules that
+                 were not selected at the time the kernel image was created
+
+       config USE_MKLIBS
+               bool "Strip unnecessary functions from libraries"
+               help
+                 Reduces libraries to only those functions that are necessary for using all
+                 selected packages (including those selected as <M>)
+                 Note that this will make the system libraries incompatible with most of the packages
+                 that are not selected during the build process

 
 endmenu
 
 
 endmenu
 

-source "target/linux/Config.in"
-source ".config.in"
+menuconfig DEVEL
+       bool "Advanced configuration options (for developers)"
+       default n
+
+       config BROKEN
+               bool "Show broken platforms / packages" if DEVEL
+               default n
+
+       config DOWNLOAD_FOLDER
+               string "Download folder" if DEVEL
+               default ""
+
+       config LOCALMIRROR
+               string "Local mirror for source packages" if DEVEL
+               default ""
+
+       config AUTOREBUILD
+               bool "Automatic rebuild of packages" if DEVEL
+               default y
+               help
+                 Automatically rebuild packages when their files change
+
+       config BUILD_SUFFIX
+               string "Build suffix to append to the BUILD_DIR variable" if DEVEL
+               default ""
+               help
+                 Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix
+
+       config TARGET_ROOTFS_DIR
+               string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL
+               default ""
+               help
+                 Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path.
+                 Use this option to re-define the location of the target root file system directory.
+
+       config CCACHE
+               bool "Use ccache" if DEVEL
+               default n
+               help
+                 Compiler cache; see http://ccache.samba.org/
+
+       config EXTERNAL_KERNEL_TREE
+               string "Use external kernel tree" if DEVEL
+               default ""
+
+       config KERNEL_GIT_CLONE_URI
+               string "Enter git repository to clone" if DEVEL
+               default ""
+               help
+                 Enter the full git repository path i.e.:
+                 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+                 This will create a git clone of the kernel in your build
+                 directory.
+
+       config KERNEL_GIT_LOCAL_REPOSITORY
+               string "Enter path to local reference repository" if DEVEL
+               default ""
+               help
+                 Enter a full pathname to a local reference git repository.
+                 In this instance, the --refererence option of git clone will
+                 be used thus creating a quick local clone of your repo.
+
+menuconfig TARGET_OPTIONS
+       bool "Target Options"  if DEVEL
+
+       config TARGET_OPTIMIZATION
+               string "Target Optimizations" if TARGET_OPTIONS
+               default DEFAULT_TARGET_OPTIMIZATION
+               help
+                 Optimizations to use when building for the target host.
+
+       config SOFT_FLOAT
+               bool "Use software floating point by default" if TARGET_OPTIONS
+               default y
+               depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU
+               help
+                 If your target CPU does not have a Floating Point Unit (FPU) or a
+                 kernel FPU emulator, but you still wish to support floating point
+                 functions, then everything will need to be compiled with soft floating
+                 point support (-msoft-float).
+
+                 Most people will answer N.
+
+source "toolchain/Config.in"
+
+source "target/imagebuilder/Config.in"
+source "target/sdk/Config.in"
+source "target/toolchain/Config.in"

 
 

+source "tmp/.config-package.in"