rtl8366_smi: register the switch directly from the probe routine
[openwrt.git] / target / linux / ar71xx / files / drivers / net / phy / rtl8366_smi.c
index 0d54126..3b4795b 100644 (file)
@@ -1718,6 +1718,27 @@ static struct switch_dev rtldev = {
        .reset_switch = rtl8366_reset_switch,
 };
 
+static int rtl8366_smi_switch_init(struct rtl8366_smi *smi)
+{
+       struct switch_dev *dev = &smi->dev;
+       int err;
+
+       memcpy(dev, &rtldev, sizeof(struct switch_dev));
+       dev->priv = smi;
+       dev->devname = dev_name(&smi->pdev->dev);
+
+       err = register_switch(dev, NULL);
+       if (err)
+               dev_err(&smi->pdev->dev, "switch registration failed\n");
+
+       return;
+}
+
+static void rtl8366_smi_switch_cleanup(struct rtl8366_smi *smi)
+{
+       unregister_switch(&smi->dev);
+}
+
 static int rtl8366_smi_mii_read(struct mii_bus *bus, int addr, int reg)
 {
        struct rtl8366_smi *smi = bus->priv;
@@ -1787,6 +1808,12 @@ static void rtl8366_smi_mii_cleanup(struct rtl8366_smi *smi)
        mdiobus_free(smi->mii_bus);
 }
 
+static int rtl8366_smi_mii_bus_match(struct mii_bus *bus)
+{
+       return (bus->read == rtl8366_smi_mii_read &&
+               bus->write == rtl8366_smi_mii_write);
+}
+
 static int rtl8366_smi_setup(struct rtl8366_smi *smi)
 {
        u32 chip_id = 0;
@@ -1878,8 +1905,14 @@ static int __init rtl8366_smi_probe(struct platform_device *pdev)
        if (err)
                goto err_clear_drvdata;
 
+       err = rtl8366_smi_switch_init(smi);
+       if (err)
+               goto err_mii_cleanup;
+
        return 0;
 
+ err_mii_cleanup:
+       rtl8366_smi_mii_cleanup(smi);
  err_clear_drvdata:
        platform_set_drvdata(pdev, NULL);
        gpio_free(pdata->gpio_sck);
@@ -1893,26 +1926,8 @@ static int __init rtl8366_smi_probe(struct platform_device *pdev)
 
 int rtl8366_phy_config_init(struct phy_device *phydev)
 {
-       int err;
-       struct net_device *netdev = phydev->attached_dev;
-       struct rtl8366_smi *smi = phydev->bus->priv;
-       struct switch_dev *dev = &smi->dev;
-
-       /* Only init the switch for the primary PHY */
-       if (phydev->addr != 4) {
-               printk(KERN_INFO "Discarding address: %d\n", phydev->addr);
-               return 0;
-       }
-
-       memcpy(&smi->dev, &rtldev, sizeof(struct switch_dev));
-       dev->priv = smi;
-       dev->netdev = netdev;
-
-       err = register_switch(dev, netdev);
-       if (err < 0) {
-               printk(KERN_INFO "Switch registration failed\n");
-               return err;
-       }
+       if (!rtl8366_smi_mii_bus_match(phydev->bus))
+               return -EINVAL;
 
        return 0;
 }
@@ -1944,8 +1959,8 @@ static int __devexit rtl8366_smi_remove(struct platform_device *pdev)
 
                pdata = pdev->dev.platform_data;
 
+               rtl8366_smi_switch_cleanup(smi);
                rtl8366_debugfs_remove(smi);
-               phy_driver_unregister(&rtl8366_smi_phy_driver);
                rtl8366_smi_mii_cleanup(smi);
                platform_set_drvdata(pdev, NULL);
                gpio_free(pdata->gpio_sck);
This page took 0.030557 seconds and 4 git commands to generate.