ramips: nuke config_access helper
[openwrt.git] / package / uboot-ifxmips / files / drivers / ifx_sw.c
index ac8f1c8..ac0415a 100644 (file)
@@ -27,7 +27,7 @@
 #include <common.h>
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
-    && defined(CONFIG_DANUBE_SWITCH)
+       && defined(CONFIG_DANUBE_SWITCH)
 
 #include <malloc.h>
 #include <net.h>
 #define TX_CHAN_NO   7
 #define RX_CHAN_NO   6
 
-#define NUM_RX_DESC    PKTBUFSRX                  
+#define NUM_RX_DESC    PKTBUFSRX
 #define NUM_TX_DESC    8
 #define MAX_PACKET_SIZE        1536
 #define TOUT_LOOP      100
-#define PHY0_ADDR       1 /*fixme: set the correct value here*/ 
+#define PHY0_ADDR       1 /*fixme: set the correct value here*/
 
 #define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value
 #define DMA_READ_REG(reg, value)    value = (u32)*((volatile u32*)reg)
 
-#define SW_WRITE_REG(reg, value)  *((volatile u32*)reg) = (u32)value   
+#define SW_WRITE_REG(reg, value)  *((volatile u32*)reg) = (u32)value
 #define SW_READ_REG(reg, value)   value = (u32)*((volatile u32*)reg)
 
+#define TANTOS_CHIP_ID 0x2599
+
 typedef struct
 {
        union
        {
                struct
                {
-                       volatile u32 OWN                 :1;
-                       volatile u32 C                   :1;
-                       volatile u32 Sop                 :1;
-                       volatile u32 Eop                 :1;
-                       volatile u32 reserved            :3;
-                       volatile u32 Byteoffset          :2; 
-                       volatile u32 reserve             :7;
-                       volatile u32 DataLen             :16;
+                       volatile u32 OWN        :1;
+                       volatile u32 C          :1;
+                       volatile u32 Sop        :1;
+                       volatile u32 Eop        :1;
+                       volatile u32 reserved   :3;
+                       volatile u32 Byteoffset :2;
+                       volatile u32 reserve    :7;
+                       volatile u32 DataLen    :16;
                }field;
 
                volatile u32 word;
        }status;
-       
+
        volatile u32 DataPtr;
 } danube_rx_descriptor_t;
 
@@ -81,18 +83,18 @@ typedef struct
        {
                struct
                {
-                       volatile u32 OWN                 :1;
-                       volatile u32 C                   :1;
-                       volatile u32 Sop                 :1;
-                       volatile u32 Eop                 :1;
-                       volatile u32 Byteoffset          :5; 
-                       volatile u32 reserved            :7;
-                       volatile u32 DataLen             :16;
+                       volatile u32 OWN        :1;
+                       volatile u32 C          :1;
+                       volatile u32 Sop        :1;
+                       volatile u32 Eop        :1;
+                       volatile u32 Byteoffset :5;
+                       volatile u32 reserved   :7;
+                       volatile u32 DataLen    :16;
                }field;
 
                volatile u32 word;
        }status;
-       
+
        volatile u32 DataPtr;
 } danube_tx_descriptor_t;
 
@@ -115,7 +117,8 @@ static void danube_dma_init(void);
 int danube_switch_initialize(bd_t * bis)
 {
        struct eth_device *dev;
-      
+       unsigned short chipid;
+
 #if 0
        printf("Entered danube_switch_initialize()\n");
 #endif
@@ -129,21 +132,21 @@ int danube_switch_initialize(bd_t * bis)
 
        danube_dma_init();
        danube_init_switch_chip(REV_MII_MODE);
-        
+
 #ifdef CLK_OUT2_25MHZ
-       *DANUBE_GPIO_P0_DIR=0x0000ae78;
-       *DANUBE_GPIO_P0_ALTSEL0=0x00008078; 
-       //joelin for Mii-1       *DANUBE_GPIO_P0_ALTSEL1=0x80000080;
-       *DANUBE_GPIO_P0_ALTSEL1=0x80000000; //joelin for Mii-1 
-       *DANUBE_CGU_IFCCR=0x00400010;
-       *DANUBE_GPIO_P0_OD=0x0000ae78;
-#endif        
-       
-        /*patch for 6996*/
-       
+       *DANUBE_GPIO_P0_DIR=0x0000ae78;
+       *DANUBE_GPIO_P0_ALTSEL0=0x00008078;
+       //joelin for Mii-1       *DANUBE_GPIO_P0_ALTSEL1=0x80000080;
+       *DANUBE_GPIO_P0_ALTSEL1=0x80000000; //joelin for Mii-1
+       *DANUBE_CGU_IFCCR=0x00400010;
+       *DANUBE_GPIO_P0_OD=0x0000ae78;
+#endif
+
+       /*patch for 6996*/
+
        *DANUBE_RCU_RST_REQ |=1;
-        mdelay(200);
-       *DANUBE_RCU_RST_REQ &=(unsigned long)~1; 
+       mdelay(200);
+       *DANUBE_RCU_RST_REQ &=(unsigned long)~1;
        mdelay(1);
        /*while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
        *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602;
@@ -160,29 +163,76 @@ int danube_switch_initialize(bd_t * bis)
 
        eth_register(dev);
 
-#if 0
-       printf("Leaving danube_switch_initialize()\n");
-#endif
-       while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-       *DANUBE_PPE_ETOP_MDIO_ACC =0x8001840F;
-       while((*DANUBE_PPE_ETOP_MDIO_ACC)&0x80000000);
-       *DANUBE_PPE_ETOP_MDIO_ACC =0x8003840F;
-       while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-       *DANUBE_PPE_ETOP_MDIO_ACC =0x8005840F;
-       //while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-       //*DANUBE_PPE_ETOP_MDIO_ACC =0x8006840F;
        while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-       *DANUBE_PPE_ETOP_MDIO_ACC =0x8007840F;
+       *DANUBE_PPE_ETOP_MDIO_ACC =0xc1010000;
        while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-       *DANUBE_PPE_ETOP_MDIO_ACC =0x8008840F;
-       while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-       *DANUBE_PPE_ETOP_MDIO_ACC =0x8001840F;
-        while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-       *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602; 
-#ifdef CLK_OUT2_25MHZ         
-        while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-        *DANUBE_PPE_ETOP_MDIO_ACC =0x80334000;
+       chipid = (unsigned short)(*DANUBE_PPE_ETOP_MDIO_ACC & 0xffff);
+
+       if (chipid != TANTOS_CHIP_ID) // not tantos switch.
+       {
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x8001840F;
+               while((*DANUBE_PPE_ETOP_MDIO_ACC)&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x8003840F;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x8005840F;
+               //while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               //*DANUBE_PPE_ETOP_MDIO_ACC =0x8006840F;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x8007840F;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x8008840F;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x8001840F;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602;
+#ifdef CLK_OUT2_25MHZ
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x80334000;
 #endif
+       }
+       else // Tantos switch chip
+       {
+               //printf("Tantos Switch detected!!\n\r");
+
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x80a10004;
+
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x80c10004;
+
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x80f50773;
+
+               /* Software workaround. */
+               /* PHY reset from P0 to P4. */
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+
+               mdelay(1);
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x81218000;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               mdelay(1);
+               /* P0 */
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x81200400;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               mdelay(1);
+               /* P1 */
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x81200420;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               mdelay(1);
+               /* P2 */
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x81200440;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               mdelay(1);
+               /* P3 */
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x81200460;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               mdelay(1);
+               /* p4 */
+               *DANUBE_PPE_ETOP_MDIO_ACC =0x81200480;
+               while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
+               mdelay(1);
+       }
 
        return 1;
 }
@@ -193,34 +243,33 @@ int danube_switch_init(struct eth_device *dev, bd_t * bis)
 
        tx_num=0;
        rx_num=0;
-       
-               /* Reset DMA 
-                */
+
+       /* Reset DMA */
 //     serial_puts("i \n\0");
 
-       *DANUBE_DMA_CS=RX_CHAN_NO;
-       *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
-       *DANUBE_DMA_CPOLL= 0x80000040;
-       /*set descriptor base*/
-       *DANUBE_DMA_CDBA=(u32)rx_des_ring;
-       *DANUBE_DMA_CDLEN=NUM_RX_DESC;
-       *DANUBE_DMA_CIE = 0;
-       *DANUBE_DMA_CCTRL=0x30000;
-               
-       *DANUBE_DMA_CS=TX_CHAN_NO;
-       *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
-       *DANUBE_DMA_CPOLL= 0x80000040;
-       *DANUBE_DMA_CDBA=(u32)tx_des_ring;
-       *DANUBE_DMA_CDLEN=NUM_TX_DESC;  
-       *DANUBE_DMA_CIE = 0;
-       *DANUBE_DMA_CCTRL=0x30100;
-       
+       *DANUBE_DMA_CS=RX_CHAN_NO;
+       *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
+       *DANUBE_DMA_CPOLL= 0x80000040;
+       /*set descriptor base*/
+       *DANUBE_DMA_CDBA=(u32)rx_des_ring;
+       *DANUBE_DMA_CDLEN=NUM_RX_DESC;
+       *DANUBE_DMA_CIE = 0;
+       *DANUBE_DMA_CCTRL=0x30000;
+
+       *DANUBE_DMA_CS=TX_CHAN_NO;
+       *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
+       *DANUBE_DMA_CPOLL= 0x80000040;
+       *DANUBE_DMA_CDBA=(u32)tx_des_ring;
+       *DANUBE_DMA_CDLEN=NUM_TX_DESC;
+       *DANUBE_DMA_CIE = 0;
+       *DANUBE_DMA_CCTRL=0x30100;
+
        for(i=0;i < NUM_RX_DESC; i++)
        {
                danube_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_des_ring[i]);
-               rx_desc->status.word=0; 
+               rx_desc->status.word=0;
                rx_desc->status.field.OWN=1;
-               rx_desc->status.field.DataLen=PKTSIZE_ALIGN;   /* 1536  */      
+               rx_desc->status.field.DataLen=PKTSIZE_ALIGN;   /* 1536  */
                rx_desc->DataPtr=(u32)KSEG1ADDR(NetRxPackets[i]);
        }
 
@@ -230,20 +279,20 @@ int danube_switch_init(struct eth_device *dev, bd_t * bis)
                memset(tx_desc, 0, sizeof(tx_des_ring[0]));
        }
                /* turn on DMA rx & tx channel
-                */
-        *DANUBE_DMA_CS=RX_CHAN_NO;
-        *DANUBE_DMA_CCTRL|=1;/*reset and turn on the channel*/
-       
+               */
+       *DANUBE_DMA_CS=RX_CHAN_NO;
+       *DANUBE_DMA_CCTRL|=1;/*reset and turn on the channel*/
+
        return 0;
 }
 
 void danube_switch_halt(struct eth_device *dev)
 {
-        int i; 
-               for(i=0;i<8;i++)
+       int i;
+       for(i=0;i<8;i++)
        {
-          *DANUBE_DMA_CS=i;
-          *DANUBE_DMA_CCTRL&=~1;/*stop the dma channel*/
+               *DANUBE_DMA_CS=i;
+               *DANUBE_DMA_CCTRL&=~1;/*stop the dma channel*/
        }
 //     udelay(1000000);
 }
@@ -251,17 +300,17 @@ void danube_switch_halt(struct eth_device *dev)
 int danube_switch_send(struct eth_device *dev, volatile void *packet,int length)
 {
 
-       int                     i;
-       int                     res = -1;
+       int i;
+       int res = -1;
 
        danube_tx_descriptor_t * tx_desc= KSEG1ADDR(&tx_des_ring[tx_num]);
-       
+
        if (length <= 0)
        {
                printf ("%s: bad packet size: %d\n", dev->name, length);
                goto Done;
        }
-       
+
        for(i=0; tx_desc->status.field.OWN==1; i++)
        {
                if(i>=TOUT_LOOP)
@@ -280,44 +329,40 @@ int danube_switch_send(struct eth_device *dev, volatile void *packet,int length)
        if(length<60)
                tx_desc->status.field.DataLen = 60;
        else
-               tx_desc->status.field.DataLen = (u32)length;    
-       
+               tx_desc->status.field.DataLen = (u32)length;
+
        asm("SYNC");
        tx_desc->status.field.OWN=1;
-                               
+
        res=length;
        tx_num++;
-        if(tx_num==NUM_TX_DESC) tx_num=0;
+       if(tx_num==NUM_TX_DESC) tx_num=0;
        *DANUBE_DMA_CS=TX_CHAN_NO;
-         
+
        if(!(*DANUBE_DMA_CCTRL & 1))
-       *DANUBE_DMA_CCTRL|=1;
-        
+               *DANUBE_DMA_CCTRL|=1;
+
 Done:
        return res;
 }
 
 int danube_switch_recv(struct eth_device *dev)
 {
-
-       int                    length  = 0;
-
+       int length  = 0;
        danube_rx_descriptor_t * rx_desc;
-        int anchor_num=0;
-       int i;
+
        for (;;)
        {
-               rx_desc = KSEG1ADDR(&rx_des_ring[rx_num]);
+               rx_desc = KSEG1ADDR(&rx_des_ring[rx_num]);
 
-               if ((rx_desc->status.field.C == 0) || (rx_desc->status.field.OWN == 1))
+               if ((rx_desc->status.field.C == 0) || (rx_desc->status.field.OWN == 1))
                {
-                  break;
+                       break;
                }
-                
-                
+
                length = rx_desc->status.field.DataLen;
                if (length)
-               {               
+               {
                        NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_num]), length - 4);
                //      serial_putc('*');
                }
@@ -342,10 +387,8 @@ int danube_switch_recv(struct eth_device *dev)
 
 static void danube_init_switch_chip(int mode)
 {
-        int i;
-        /*get and set mac address for MAC*/
-        static unsigned char addr[6];
-        char *tmp,*end; 
+       /*get and set mac address for MAC*/
+       char *tmp;
        tmp = getenv ("ethaddr");
        if (NULL == tmp) {
                printf("Can't get environment ethaddr!!!\n");
@@ -353,58 +396,55 @@ static void danube_init_switch_chip(int mode)
        } else {
                printf("ethaddr=%s\n", tmp);
        }
-        *DANUBE_PMU_PWDCR = *DANUBE_PMU_PWDCR & 0xFFFFEFDF;
-        *DANUBE_PPE32_ETOP_MDIO_CFG &= ~0x6;
-        *DANUBE_PPE32_ENET_MAC_CFG = 0x187;
-  
-  // turn on port0, set to rmii and turn off port1.
-       if(mode==REV_MII_MODE)
-               {
-                *DANUBE_PPE32_ETOP_CFG = (*DANUBE_PPE32_ETOP_CFG & 0xfffffffc) | 0x0000000a;
-                } 
+       *DANUBE_PMU_PWDCR = *DANUBE_PMU_PWDCR & 0xFFFFEFDF;
+       *DANUBE_PPE32_ETOP_MDIO_CFG &= ~0x6;
+       *DANUBE_PPE32_ENET_MAC_CFG = 0x187;
+
+       // turn on port0, set to rmii and turn off port1.
+       if (mode==REV_MII_MODE)
+       {
+               *DANUBE_PPE32_ETOP_CFG = (*DANUBE_PPE32_ETOP_CFG & 0xfffffffc) | 0x0000000a;
+       }
        else if (mode == MII_MODE)
-               {
+       {
                *DANUBE_PPE32_ETOP_CFG = (*DANUBE_PPE32_ETOP_CFG & 0xfffffffc) | 0x00000008;
-                }        
+       }
 
        *DANUBE_PPE32_ETOP_IG_PLEN_CTRL = 0x4005ee; // set packetlen.
-        *ENET_MAC_CFG|=1<<11;/*enable the crc*/
+       *ENET_MAC_CFG |= 1<<11; /*enable the crc*/
        return;
 }
 
 
 static void danube_dma_init(void)
 {
-        int i;
 //     serial_puts("d \n\0");
 
-        *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
-               /* Reset DMA 
-                */
-       *DANUBE_DMA_CTRL|=1; 
-        *DANUBE_DMA_IRNEN=0;/*disable all the interrupts first*/
+       *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
+       /* Reset DMA */
+       *DANUBE_DMA_CTRL|=1;
+       *DANUBE_DMA_IRNEN=0;/*disable all the interrupts first*/
 
-       /* Clear Interrupt Status Register               
-       */
+       /* Clear Interrupt Status Register */
        *DANUBE_DMA_IRNCR=0xfffff;
        /*disable all the dma interrupts*/
        *DANUBE_DMA_IRNEN=0;
        /*disable channel 0 and channel 1 interrupts*/
-       
-         *DANUBE_DMA_CS=RX_CHAN_NO;
-         *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
-          *DANUBE_DMA_CPOLL= 0x80000040;
-          /*set descriptor base*/
-          *DANUBE_DMA_CDBA=(u32)rx_des_ring;
-          *DANUBE_DMA_CDLEN=NUM_RX_DESC;
-          *DANUBE_DMA_CIE = 0;
-          *DANUBE_DMA_CCTRL=0x30000;
-               
+
+       *DANUBE_DMA_CS=RX_CHAN_NO;
+       *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
+       *DANUBE_DMA_CPOLL= 0x80000040;
+       /*set descriptor base*/
+       *DANUBE_DMA_CDBA=(u32)rx_des_ring;
+       *DANUBE_DMA_CDLEN=NUM_RX_DESC;
+       *DANUBE_DMA_CIE = 0;
+       *DANUBE_DMA_CCTRL=0x30000;
+
        *DANUBE_DMA_CS=TX_CHAN_NO;
        *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
-        *DANUBE_DMA_CPOLL= 0x80000040;
+       *DANUBE_DMA_CPOLL= 0x80000040;
        *DANUBE_DMA_CDBA=(u32)tx_des_ring;
-        *DANUBE_DMA_CDLEN=NUM_TX_DESC;  
+       *DANUBE_DMA_CDLEN=NUM_TX_DESC;
        *DANUBE_DMA_CIE = 0;
        *DANUBE_DMA_CCTRL=0x30100;
        /*enable the poll function and set the poll counter*/
@@ -416,8 +456,4 @@ static void danube_dma_init(void)
        return;
 }
 
-
-
-
-
 #endif
This page took 0.038277 seconds and 4 git commands to generate.