-hostapd_setup_vif() {
- local vif="$1"
- local driver="$2"
- local hostapd_cfg=
+hostapd_set_bss_options() {
+ local var="$1"
+ local vif="$2"
+ local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible
+
+ config_get enc "$vif" encryption
+ config_get wep_rekey "$vif" wep_rekey # 300
+ config_get wpa_group_rekey "$vif" wpa_group_rekey # 300
+ config_get wpa_pair_rekey "$vif" wpa_pair_rekey # 300
+ config_get wpa_master_rekey "$vif" wpa_master_rekey # 640
+ config_get_bool ap_isolate "$vif" isolate 0
+
+ config_get device "$vif" device
+ config_get hwmode "$device" hwmode
+ config_get phy "$device" phy
+
+ append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N"
+
+ if [ "$ap_isolate" -gt 0 ]; then
+ append "$var" "ap_isolate=$ap_isolate" "$N"
+ fi
# Examples:
# psk-mixed/tkip => WPA1+2 PSK, TKIP
# crypto defaults: WPA2 vs WPA1
case "$enc" in
- wpa2*|WPA2*|*PSK2*|*psk2*)
+ wpa2*|*psk2*)
wpa=2
crypto="CCMP"
;;
# explicit override for crypto setting
case "$enc" in
- *tkip+aes|*TKIP+AES|*tkip+ccmp|*TKIP+CCMP) crypto="CCMP TKIP";;
- *tkip|*TKIP) crypto="TKIP";;
- *aes|*AES|*ccmp|*CCMP) crypto="CCMP";;
+ *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";;
+ *aes|*ccmp) crypto="CCMP";;
+ *tkip) crypto="TKIP";;
+ esac
+
+ # enforce CCMP for 11ng and 11na
+ case "$hwmode:$crypto" in
+ *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";;
esac
# use crypto/auth settings for building the hostapd config
case "$enc" in
- *psk*|*PSK*)
+ *psk*)
config_get psk "$vif" key
if [ ${#psk} -eq 64 ]; then
- append hostapd_cfg "wpa_psk=$psk" "$N"
+ append "$var" "wpa_psk=$psk" "$N"
else
- append hostapd_cfg "wpa_passphrase=$psk" "$N"
+ append "$var" "wpa_passphrase=$psk" "$N"
fi
+ wps_possible=1
+ [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+ [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
+ [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N"
;;
- *wpa*|*WPA*)
+ *wpa*)
# required fields? formats?
# hostapd is particular, maybe a default configuration for failures
- config_get server "$vif" server
- append hostapd_cfg "auth_server_addr=$server" "$N"
- config_get port "$vif" port
- port=${port:-1812}
- append hostapd_cfg "auth_server_port=$port" "$N"
- config_get secret "$vif" key
- append hostapd_cfg "auth_server_shared_secret=$secret" "$N"
+ config_get auth_server "$vif" auth_server
+ [ -z "$auth_server" ] && config_get auth_server "$vif" server
+ append "$var" "auth_server_addr=$auth_server" "$N"
+ config_get auth_port "$vif" auth_port
+ [ -z "$auth_port" ] && config_get auth_port "$vif" port
+ auth_port=${auth_port:-1812}
+ append "$var" "auth_server_port=$auth_port" "$N"
+ config_get auth_secret "$vif" auth_secret
+ [ -z "$auth_secret" ] && config_get auth_secret "$vif" key
+ append "$var" "auth_server_shared_secret=$auth_secret" "$N"
+ config_get acct_server "$vif" acct_server
+ [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N"
+ config_get acct_port "$vif" acct_port
+ [ -n "$acct_port" ] && acct_port=${acct_port:-1813}
+ [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N"
+ config_get acct_secret "$vif" acct_secret
+ [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N"
config_get nasid "$vif" nasid
- append hostapd_cfg "nas_identifier=$nasid" "$N"
- append hostapd_cfg "eapol_key_index_workaround=1" "$N"
- append hostapd_cfg "radius_acct_interim_interval=300" "$N"
- append hostapd_cfg "ieee8021x=1" "$N"
- append hostapd_cfg "auth_algs=1" "$N"
- append hostapd_cfg "wpa_key_mgmt=WPA-EAP" "$N"
- append hostapd_cfg "wpa_group_rekey=300" "$N"
- append hostapd_cfg "wpa_gmk_rekey=640" "$N"
+ append "$var" "nas_identifier=$nasid" "$N"
+ append "$var" "eapol_key_index_workaround=1" "$N"
+ append "$var" "ieee8021x=1" "$N"
+ append "$var" "wpa_key_mgmt=WPA-EAP" "$N"
+ [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+ [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
+ [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N"
+ ;;
+ *wep*)
+ config_get key "$vif" key
+ key="${key:-1}"
+ case "$key" in
+ [1234])
+ for idx in 1 2 3 4; do
+ local zidx
+ zidx=$(($idx - 1))
+ config_get ckey "$vif" "key${idx}"
+ [ -n "$ckey" ] && \
+ append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N"
+ done
+ append "$var" "wep_default_key=$((key - 1))" "$N"
+ ;;
+ *)
+ append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N"
+ append "$var" "wep_default_key=0" "$N"
+ [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N"
+ ;;
+ esac
+ case "$enc" in
+ *shared*)
+ auth_algs=2
+ ;;
+ *mixed*)
+ auth_algs=3
+ ;;
+ esac
+ wpa=0
+ crypto=
;;
*)
wpa=0
crypto=
;;
esac
- config_get ifname "$vif" ifname
- config_get bridge "$vif" bridge
+ append "$var" "auth_algs=${auth_algs:-1}" "$N"
+ append "$var" "wpa=$wpa" "$N"
+ [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N"
+ [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+
config_get ssid "$vif" ssid
+ config_get bridge "$vif" bridge
+ config_get ieee80211d "$vif" ieee80211d
+ config_get iapp_interface "$vif" iapp_interface
+
+ config_get_bool wps_pbc "$vif" wps_pushbutton 0
+ config_get_bool wps_label "$vif" wps_label 0
+
+ config_get config_methods "$vif" wps_config
+ [ "$wps_pbc" -gt 0 ] && append config_methods push_button
+
+ [ -n "$wps_possible" -a -n "$config_methods" ] && {
+ config_get device_type "$vif" wps_device_type "6-0050F204-1"
+ config_get device_name "$vif" wps_device_name "OpenWrt AP"
+ config_get manufacturer "$vif" wps_manufacturer "openwrt.org"
+
+ append "$var" "eap_server=1" "$N"
+ append "$var" "wps_state=2" "$N"
+ append "$var" "ap_setup_locked=1" "$N"
+ append "$var" "device_type=$device_type" "$N"
+ append "$var" "device_name=$device_name" "$N"
+ append "$var" "manufacturer=$manufacturer" "$N"
+ append "$var" "config_methods=$config_methods" "$N"
+ }
+
+ append "$var" "ssid=$ssid" "$N"
+ [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N"
+ [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N"
+ [ -n "$iapp_interface" ] && append "$var" iapp_interface=$(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N"
+
+ if [ "$wpa" -ge "2" ]
+ then
+ # RSN -> allow preauthentication
+ config_get rsn_preauth "$vif" rsn_preauth
+ if [ -n "$bridge" -a "$rsn_preauth" = 1 ]
+ then
+ append "$var" "rsn_preauth=1" "$N"
+ append "$var" "rsn_preauth_interfaces=$bridge" "$N"
+ fi
+
+ # RSN -> allow management frame protection
+ config_get ieee80211w "$vif" ieee80211w
+ case "$ieee80211w" in
+ [012])
+ append "$var" "ieee80211w=$ieee80211w" "$N"
+ [ "$ieee80211w" -gt "0" ] && {
+ config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout
+ config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout
+ [ -n "$ieee80211w_max_timeout" ] && \
+ append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
+ [ -n "$ieee80211w_retry_timeout" ] && \
+ append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
+ }
+ ;;
+ esac
+ fi
+}
+
+hostapd_set_log_options() {
+ local var="$1"
+ local cfg="$2"
+ local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
+
+ config_get log_level "$cfg" log_level 2
+
+ config_get_bool log_80211 "$cfg" log_80211 1
+ config_get_bool log_8021x "$cfg" log_8021x 1
+ config_get_bool log_radius "$cfg" log_radius 1
+ config_get_bool log_wpa "$cfg" log_wpa 1
+ config_get_bool log_driver "$cfg" log_driver 1
+ config_get_bool log_iapp "$cfg" log_iapp 1
+ config_get_bool log_mlme "$cfg" log_mlme 1
+
+ local log_mask=$(( \
+ ($log_80211 << 0) | \
+ ($log_8021x << 1) | \
+ ($log_radius << 2) | \
+ ($log_wpa << 3) | \
+ ($log_driver << 4) | \
+ ($log_iapp << 5) | \
+ ($log_mlme << 6) \
+ ))
+
+ append "$var" "logger_syslog=$log_mask" "$N"
+ append "$var" "logger_syslog_level=$log_level" "$N"
+ append "$var" "logger_stdout=$log_mask" "$N"
+ append "$var" "logger_stdout_level=$log_level" "$N"
+}
+
+hostapd_setup_vif() {
+ local vif="$1"
+ local driver="$2"
+ local ifname device channel hwmode
+
+ hostapd_cfg=
+
+ config_get ifname "$vif" ifname
config_get device "$vif" device
config_get channel "$device" channel
config_get hwmode "$device" hwmode
- config_get wpa_group_rekey "$vif" wpa_group_rekey
- config_get ieee80211d "$vif" ieee80211d
+
+ hostapd_set_log_options hostapd_cfg "$device"
+ hostapd_set_bss_options hostapd_cfg "$vif"
+
case "$hwmode" in
- bg) hwmode=g;;
+ *bg|*gdt|*gst|*fh) hwmode=g;;
+ *adt|*ast) hwmode=a;;
esac
- config_get country "$device" country
[ "$channel" = auto ] && channel=
[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
- [ -n "$hwmode" ] && {
- config_get hwmode_11n "$device" hwmode_11n
- [ -n "$hwmode_11n" ] && {
- hwmode="$hwmode_11n"
- config_get ht_capab "$device" ht_capab
- [ -n "$ht_capab" -a -n "${ht_capab%%\[*}" ] && {
- ht_capab=`echo "[$ht_capab]" | sed -e 's, ,][,g'`
- }
- }
- }
cat > /var/run/hostapd-$ifname.conf <<EOF
-ctrl_interface=/var/run/hostapd-$ifname
driver=$driver
interface=$ifname
-${hwmode:+hw_mode=$hwmode}
+${hwmode:+hw_mode=${hwmode#11}}
${channel:+channel=$channel}
-${bridge:+bridge=$bridge}
-ssid=$ssid
-wpa=$wpa
-${crypto:+wpa_pairwise=$crypto}
-${country:+country_code=$country}
-${hwmode_11n:+ieee80211n=1}
-${ht_capab:+ht_capab=$ht_capab}
-${wpa_group_rekey:+wpa_group_rekey=$wpa_group_rekey}
-${ieee80211d:+ieee80211d=$ieee80211d}
$hostapd_cfg
EOF
- case "$driver" in
- madwifi)
- ;;
- *)
- cat >> /var/run/hostapd-$ifname.conf <<EOF
-wme_enabled=1
-wme_ac_bk_cwmin=4
-wme_ac_bk_cwmax=10
-wme_ac_bk_aifs=7
-wme_ac_bk_txop_limit=0
-wme_ac_bk_acm=0
-wme_ac_be_aifs=3
-wme_ac_be_cwmin=4
-wme_ac_be_cwmax=10
-wme_ac_be_txop_limit=0
-wme_ac_be_acm=0
-wme_ac_vi_aifs=2
-wme_ac_vi_cwmin=3
-wme_ac_vi_cwmax=4
-wme_ac_vi_txop_limit=94
-wme_ac_vi_acm=0
-wme_ac_vo_aifs=2
-wme_ac_vo_cwmin=2
-wme_ac_vo_cwmax=3
-wme_ac_vo_txop_limit=47
-wme_ac_vo_acm=0
-tx_queue_data3_aifs=7
-tx_queue_data3_cwmin=15
-tx_queue_data3_cwmax=1023
-tx_queue_data3_burst=0
-tx_queue_data2_aifs=3
-tx_queue_data2_cwmin=15
-tx_queue_data2_cwmax=63
-tx_queue_data2_burst=0
-tx_queue_data1_aifs=1
-tx_queue_data1_cwmin=7
-tx_queue_data1_cwmax=15
-tx_queue_data1_burst=3.0
-tx_queue_data0_aifs=1
-tx_queue_data0_cwmin=3
-tx_queue_data0_cwmax=7
-tx_queue_data0_burst=1.5
-EOF
- ;;
- esac
hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf
}
projects / openwrt.git / blobdiff