-Index: compat-wireless-2009-03-13/config.mk
-===================================================================
---- compat-wireless-2009-03-13.orig/config.mk 2009-03-17 21:15:23.000000000 +0100
-+++ compat-wireless-2009-03-13/config.mk 2009-03-17 21:18:05.000000000 +0100
-@@ -91,10 +91,10 @@ CONFIG_MAC80211_MESH=y
+--- a/config.mk
++++ b/config.mk
+@@ -107,10 +107,10 @@ CONFIG_MAC80211_MESH=y
CONFIG_CFG80211=m
- # CONFIG_CFG80211_REG_DEBUG is not set
+ # CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
+# CONFIG_LIB80211_CRYPT_WEP=m
+# CONFIG_LIB80211_CRYPT_CCMP=m
+# CONFIG_LIB80211_CRYPT_TKIP=m
+ # CONFIG_LIB80211_DEBUG=y
- CONFIG_NL80211=y
+ CONFIG_WIRELESS_OLD_REGULATORY=n
+@@ -127,56 +127,56 @@ CONFIG_ATH9K=m
+ # CONFIG_ATH9K_DEBUG=y
-@@ -129,18 +129,18 @@ CONFIG_IWL3945_LEDS=y
+-CONFIG_IWLWIFI=m
+-CONFIG_IWLWIFI_LEDS=y
++# CONFIG_IWLWIFI=m
++# CONFIG_IWLWIFI_LEDS=y
+ # CONFIG_IWLWIFI_RFKILL=y
+-CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
++# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
+ # CONFIG_IWLWIFI_DEBUG=y
+ # CONFIG_IWLWIFI_DEBUGFS=y
+-CONFIG_IWLAGN=m
+-CONFIG_IWL4965=y
+-CONFIG_IWL5000=y
+-CONFIG_IWL3945=m
+-CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
++# CONFIG_IWLAGN=m
++# CONFIG_IWL4965=y
++# CONFIG_IWL5000=y
++# CONFIG_IWL3945=m
++# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
- CONFIG_B43=m
+
+-CONFIG_B43=m
+-CONFIG_B43_HWRNG=y
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_PIO=y
-CONFIG_B43_LEDS=y
++# CONFIG_B43=m
++# CONFIG_B43_HWRNG=y
+# CONFIG_B43_PCI_AUTOSELECT=y
+# CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA=y
+# CONFIG_B43_PIO=y
+# CONFIG_B43_LEDS=y
# CONFIG_B43_RFKILL=y
- # CONFIG_B43_DEBUG is not set
+ # CONFIG_B43_DEBUG=y
+ # CONFIG_B43_FORCE_PIO=y
- CONFIG_B43LEGACY=m
- CONFIG_B43LEGACY_PCI_AUTOSELECT=y
- CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+-CONFIG_B43LEGACY=m
+-CONFIG_B43LEGACY_HWRNG=y
+-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
++# CONFIG_B43LEGACY=m
++# CONFIG_B43LEGACY_HWRNG=y
++# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
++# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+# CONFIG_B43LEGACY_LEDS=y
# CONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
-@@ -150,17 +150,17 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
- # CONFIG_B43LEGACY_PIO_MODE is not set
+-CONFIG_B43LEGACY_PIO=y
+-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+-# CONFIG_B43LEGACY_DMA_MODE=y
++# CONFIG_B43LEGACY_PIO=y
++# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
++CONFIG_B43LEGACY_DMA_MODE=y
+ # CONFIG_B43LEGACY_PIO_MODE=y
# The Intel ipws
-CONFIG_LIBIPW=m
+# CONFIG_LIBIPW=m
- # CONFIG_LIBIPW_DEBUG is not set
+ # CONFIG_LIBIPW_DEBUG=y
+
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100=m
+# CONFIG_IPW2100_MONITOR=y
- # CONFIG_IPW2100_DEBUG is not set
+ # CONFIG_IPW2100_DEBUG=y
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
+# CONFIG_IPW2200_RADIOTAP=y
+# CONFIG_IPW2200_PROMISCUOUS=y
+# CONFIG_IPW2200_QOS=y
- # CONFIG_IPW2200_DEBUG is not set
+ # CONFIG_IPW2200_DEBUG=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
-@@ -283,15 +283,15 @@ CONFIG_SSB_SPROM=y
- ifneq ($(CONFIG_USB),)
- ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m)
- CONFIG_LIBERTAS_USB=m
--NEED_LIBERTAS=y
-+#NEED_LIBERTAS=y
+@@ -191,27 +191,27 @@ CONFIG_IPW2200_QOS=y
+ #
+ # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
+
+-CONFIG_SSB_BLOCKIO=y
+-CONFIG_SSB_PCIHOST_POSSIBLE=y
+-CONFIG_SSB_PCIHOST=y
+-CONFIG_SSB_B43_PCI_BRIDGE=y
+-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+-CONFIG_SSB_PCMCIAHOST=y
++# CONFIG_SSB_BLOCKIO=y
++# CONFIG_SSB_PCIHOST_POSSIBLE=y
++# CONFIG_SSB_PCIHOST=y
++# CONFIG_SSB_B43_PCI_BRIDGE=y
++# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
++# CONFIG_SSB_PCMCIAHOST=y
+ # CONFIG_SSB_DEBUG=y
+-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+-CONFIG_SSB_DRIVER_PCICORE=y
++# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
++# CONFIG_SSB_DRIVER_PCICORE=y
+
+ CONFIG_P54_PCI=m
+
+-CONFIG_B44=m
+-CONFIG_B44_PCI_AUTOSELECT=y
+-CONFIG_B44_PCICORE_AUTOSELECT=y
+-CONFIG_B44_PCI=y
++# CONFIG_B44=m
++# CONFIG_B44_PCI_AUTOSELECT=y
++# CONFIG_B44_PCICORE_AUTOSELECT=y
++# CONFIG_B44_PCI=y
+
+ CONFIG_RTL8180=m
+
+-CONFIG_ADM8211=m
+-CONFIG_PCMCIA_ATMEL=m
++# CONFIG_ADM8211=m
++# CONFIG_PCMCIA_ATMEL=m
+
+ CONFIG_RT2X00_LIB_PCI=m
+ CONFIG_RT2400PCI=m
+@@ -227,24 +227,24 @@ CONFIG_RT61PCI=m
+ NEED_RT2X00_FIRMWARE=y
endif
+
+-CONFIG_ATMEL=m
+-CONFIG_PCI_ATMEL=m
++# CONFIG_ATMEL=m
++# CONFIG_PCI_ATMEL=m
+
+-CONFIG_MWL8K=m
++# CONFIG_MWL8K=m
+
endif
+ ## end of PCI
+
ifneq ($(CONFIG_PCMCIA),)
- CONFIG_LIBERTAS_CS=m
+
+-CONFIG_LIBERTAS_CS=m
-NEED_LIBERTAS=y
-+#NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_CS=m
++# NEED_LIBERTAS=y
+
endif
+ ## end of PCMCIA
+
+ # This is required for some cards
+-CONFIG_EEPROM_93CX6=m
++# CONFIG_EEPROM_93CX6=m
+
+ # USB Drivers
+ ifneq ($(CONFIG_USB),)
+@@ -258,21 +258,21 @@ CONFIG_ZD1211RW=m
+ # is only wireless RNDIS chip known to date.
+ # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
+ # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
+-CONFIG_USB_NET_RNDIS_HOST=m
+-CONFIG_USB_NET_RNDIS_WLAN=m
+-CONFIG_USB_NET_CDCETHER=m
++# CONFIG_USB_NET_RNDIS_HOST=m
++# CONFIG_USB_NET_RNDIS_WLAN=m
++# CONFIG_USB_NET_CDCETHER=m
+
+
+ CONFIG_P54_USB=m
+ CONFIG_RTL8187=m
+
+-CONFIG_AT76C50X_USB=m
++# CONFIG_AT76C50X_USB=m
+
+ # Activate AR9170 support only on kernel >= 2.6.29.
+ # The needed USB poison feature was added in this kernel release.
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
+-CONFIG_AR9170_USB=m
+-CONFIG_AR9170_LEDS=y
++# CONFIG_AR9170_USB=m
++# CONFIG_AR9170_LEDS=y
+ endif
+
+ # RT2500USB does not require firmware
+@@ -286,24 +286,24 @@ CONFIG_RT73USB=m
+ NEED_RT2X00_FIRMWARE=y
+ endif
+
+-CONFIG_LIBERTAS_THINFIRM_USB=m
+-CONFIG_LIBERTAS_USB=m
+-NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_THINFIRM_USB=m
++# CONFIG_LIBERTAS_USB=m
++# NEED_LIBERTAS=y
+
+ endif # end of USB driver list
+
+ ifneq ($(CONFIG_SPI_MASTER),)
+
+-CONFIG_WL12XX=m
+-CONFIG_LIBERTAS_SPI=m
+-NEED_LIBERTAS=y
++# CONFIG_WL12XX=m
++# CONFIG_LIBERTAS_SPI=m
++# NEED_LIBERTAS=y
+
+ endif # end of SPI driver list
+
+ ifneq ($(CONFIG_MMC),)
+
+-CONFIG_LIBERTAS_SDIO=m
+-NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_SDIO=m
++# NEED_LIBERTAS=y
+
+ endif # end of SDIO driver list
+
+@@ -333,13 +333,13 @@ CONFIG_ATH_COMMON=m
+
+
+ # Sonics Silicon Backplane
+-CONFIG_SSB_POSSIBLE=y
+-CONFIG_SSB=m
+-CONFIG_SSB_SPROM=y
++# CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB=m
++# CONFIG_SSB_SPROM=y
+ # CONFIG_SSB_DEBUG=y
+
ifeq ($(NEED_LIBERTAS),y)
--CONFIG_LIBERTAS=m
-+#CONFIG_LIBERTAS=m
- # Libertas uses the old stack but not fully, it will soon
- # be cleaned.
+-CONFIG_LIBERTAS_THINFIRM=m
++# CONFIG_LIBERTAS_THINFIRM=m
+ CONFIG_LIBERTAS=m
+ # CONFIG_LIBERTAS_DEBUG=y
endif
projects / openwrt.git / blobdiff