[adm5120] fix support for 2.6.38 kernel

[openwrt.git] / package / ppp / files / ppp.sh

diff --git a/package/ppp/files/ppp.sh b/package/ppp/files/ppp.sh
old mode 100644 (file)
new mode 100755 (executable)
index abc0227..5f549bf
--- a/package/ppp/files/ppp.sh
+++ b/package/ppp/files/ppp.sh
@@ -1,40 +1,183 @@
-scan_ppp() {
-       config_get ifname "$1" ifname
-       pppdev="${pppdev:-0}"
-       config_set "$1" ifname "ppp$pppdev"
-       config_set "$1" unit "$pppdev"
-}
-
-start_pppd() {
-       local cfg="$1"; shift
-
-       # make sure only one pppd process is started
-       lock "/var/lock/ppp-${cfg}"
-       local pid="$(head -n1 /var/run/ppp-${cfg}.pid 2>/dev/null)"
-       [ -d "/proc/$pid" ] && grep pppd "/proc/$pid/cmdline" 2>/dev/null >/dev/null && {
-               lock -u "/var/lock/ppp-${cfg}"
-               return 0
-       }
-
-       config_get device "$cfg" device
-       config_get unit "$cfg" unit
-       config_get username "$cfg" username
-       config_get password "$cfg" password
-       config_get keepalive "$cfg" keepalive
-       interval="${keepalive%%*[, ]}"
+#!/bin/sh
+
+[ -x /usr/sbin/pppd ] || exit 0
+
+[ -n "$INCLUDE_ONLY" ] || {
+       . /etc/functions.sh
+       . ../netifd-proto.sh
+       init_proto "$@"
+}
+
+ppp_generic_init_config() {
+       proto_config_add_string "username"
+       proto_config_add_string "password"
+       proto_config_add_string "keepalive"
+       proto_config_add_int "demand"
+       proto_config_add_string "pppd_options"
+       proto_config_add_string "connect"
+       proto_config_add_string "disconnect"
+       proto_config_add_boolean "defaultroute"
+       proto_config_add_boolean "peerdns"
+       proto_config_add_boolean "ipv6"
+       proto_config_add_int "mtu"
+}
+
+ppp_generic_setup() {
+       local config="$1"; shift
+
+       json_get_var ipv6 ipv6
+       [ "$ipv6" = 1 ] || ipv6=""
+
+       json_get_var peerdns peerdns
+       [ "$peerdns" = 0 ] && peerdns="" || peerdns="1"
+
+       json_get_var defaultroute defaultroute
+       if [ "$defaultroute" = 1 ]; then
+               defaultroute="defaultroute replacedefaultroute";
+       else
+               defaultroute="nodefaultroute"
+       fi
+
+       json_get_var demand demand
+       if [ "${demand:-0}" -gt 0 ]; then
+               demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
+       else
+               demand="persist"
+       fi
+
+       [ -n "$mtu" ] || json_get_var mtu mtu
+
+       json_get_var keepalive keepalive
+       local interval="${keepalive##*[, ]}"

        [ "$interval" != "$keepalive" ] || interval=5
        [ "$interval" != "$keepalive" ] || interval=5

-       
-       config_get demand "$cfg" demand
-       [ -n "$demand" ] && echo "nameserver 1.1.1.1" > /tmp/resolv.conf
-       /usr/sbin/pppd "$@" \
-               ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive##[, ]*}} \
-               ${demand:+precompiled-active-filter /etc/ppp/filter demand idle }${demand:-persist} \
-               usepeerdns \
-               defaultroute \
-               replacedefaultroute \
+
+       json_get_var username username
+       json_get_var password password
+
+       [ -n "$connect" ] || json_get_var connect connect
+       [ -n "$disconnect" ] || json_get_var disconnect disconnect
+       json_get_var pppd_options pppd_options
+
+       proto_run_command "$config" /usr/sbin/pppd \
+               nodetach ipparam "$config" \
+               ifname "${proto:-ppp}-$config" \
+               ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
+               ${ipv6:++ipv6} $defaultroute \
+               ${peerdns:+usepeerdns} \
+               $demand maxfail 1 \

                ${username:+user "$username" password "$password"} \
                ${username:+user "$username" password "$password"} \

-               linkname "$cfg" \
-               ipparam "$cfg"
+               ${connect:+connect "$connect"} \
+               ${disconnect:+disconnect "$disconnect"} \
+               ip-up-script /lib/netifd/ppp-up \
+               ipv6-up-script /lib/netifd/ppp-up \
+               ip-down-script /lib/netifd/ppp-down \
+               ipv6-down-script /lib/netifd/ppp-down \
+               ${mtu:+mtu $mtu mru $mtu} \
+               $pppd_options "$@"
+}
+
+ppp_generic_teardown() {
+       local interface="$1"
+
+       case "$ERROR" in
+               11|19)
+                       proto_notify_error "$interface" AUTH_FAILED
+                       proto_block_restart "$interface"
+               ;;
+       esac
+       proto_kill_command "$interface"
+}
+
+# PPP on serial device
+
+proto_ppp_init_config() {
+       proto_config_add_string "device"
+       ppp_generic_init_config
+       no_device=1
+       available=1
+}
+
+proto_ppp_setup() {
+       local config="$1"
+
+       json_get_var device device
+       ppp_generic_setup "$config" "$device"
+}
+
+proto_ppp_teardown() {
+       ppp_generic_teardown "$@"
+}
+
+proto_pppoe_init_config() {
+       ppp_generic_init_config
+       proto_config_add_string "ac"
+       proto_config_add_string "service"
+}
+
+proto_pppoe_setup() {
+       local config="$1"
+       local iface="$2"
+
+       for module in slhc ppp_generic pppox pppoe; do
+               /sbin/insmod $module 2>&- >&-
+       done
+
+       json_get_var mtu mtu
+       mtu="${mtu:-1492}"
+
+       json_get_var ac ac
+       json_get_var service service
+
+       ppp_generic_setup "$config" \
+               plugin rp-pppoe.so \
+               ${ac:+rp_pppoe_ac "$ac"} \
+               ${service:+rp_pppoe_service "$service"} \
+               "nic-$iface"
+}
+
+proto_pppoe_teardown() {
+       ppp_generic_teardown "$@"
+}
+
+proto_pppoa_init_config() {
+       ppp_generic_init_config
+       proto_config_add_int "atmdev"
+       proto_config_add_int "vci"
+       proto_config_add_int "vpi"
+       proto_config_add_string "encaps"
+}
+
+proto_pppoa_setup() {
+       local config="$1"
+       local iface="$2"
+
+       for module in slhc ppp_generic pppox pppoatm; do
+               /sbin/insmod $module 2>&- >&-
+       done
+
+       json_get_var atmdev atmdev
+       json_get_var vci vci
+       json_get_var vpi vpi

 
 

-       lock -u "/var/lock/ppp-${cfg}"
+       json_get_var encaps encaps
+       case "$encaps" in
+               1|vc) encaps="vc-encaps" ;;
+               *) encaps="llc-encaps" ;;
+       esac
+
+       ppp_generic_setup "$config" \
+               plugin pppoatm.so \
+               ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \
+               ${encaps}
+}
+
+proto_pppoa_teardown() {
+       ppp_generic_teardown "$@"

 }
 }

+
+[ -n "$INCLUDE_ONLY" ] || {
+       add_protocol ppp
+       [ -f /usr/lib/pppd/*/rp-pppoe.so ] && add_protocol pppoe
+       [ -f /usr/lib/pppd/*/pppoatm.so ] && add_protocol pppoa
+}
+