resync 2.6.31 patches
[openwrt.git] / target / linux / ar71xx / image / Makefile
index 67764d6..816f27e 100644 (file)
@@ -1,5 +1,5 @@
-# 
-# Copyright (C) 2008 OpenWrt.org
+#
+# Copyright (C) 2008-2009 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+IMGNAME:=$(BIN_DIR)/openwrt-$(BOARD)
+
+define imgname
+$(IMGNAME)-$(2)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
+endef
+
+VMLINUX:=$(IMGNAME)-vmlinux
+ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+       VMLINUX:=$(IMGNAME)-vmlinux-initramfs
+endif
+
 define Image/BuildKernel
-       cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.elf
+       cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
+       cp $(KDIR)/vmlinux $(VMLINUX).bin
        gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
        $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
-       dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(BOARD)-vmlinux.lzma bs=65536 conv=sync
-       dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(BOARD)-vmlinux.gz bs=65536 conv=sync
-       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma
+       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux -lc1 -lp2 -pb2 $(KDIR)/vmlinux.bin.lzma
+       dd if=$(KDIR)/vmlinux.bin.l7 of=$(VMLINUX).lzma bs=65536 conv=sync
+       dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync
+       mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
+               0x80060000 \
+               -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $(KDIR)/vmlinux.bin.gz $(IMGNAME)-uImage-gzip.bin
+       mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+               0x80060000 \
+               -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $(KDIR)/vmlinux.bin.lzma $(IMGNAME)-uImage-lzma.bin
+endef
+
+define Image/Build/WRT400N
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
+       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux-$(2) $(KDIR)/vmlinux-$(2).bin.lzma
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1310720 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6488064 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=6336k conv=sync; \
+                       echo -n $(4); \
+               ) > $(call imgname,$(1),$(2)).bin; \
+               wrt400n $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call imgname,$(1),$(2)).webui; \
+       fi; fi
+endef
+
+define Image/Build/AP81
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
+       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux-$(2) $(KDIR)/vmlinux-$(2).bin.lzma
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 851968 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 3014656 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=832k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=2944k conv=sync; \
+                       echo -n $(4); \
+               ) > $(call imgname,$(1),$(2)).uni; \
+       fi; fi
+endef
+
+define Image/Build/AP83
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
+       gzip -9 -c $(KDIR)/vmlinux-$(2) > $(KDIR)/vmlinux-$(2).bin.gz
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1310720 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6619136 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.gz \
+                       $(KDIR)/vmlinux-$(2).uImage; \
+               dd if=$(KDIR)/vmlinux-$(2).uImage \
+                       of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
+               dd if=$(KDIR)/root.$(1) \
+                       of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
+                       dd if=$(KDIR)/root.$(1); \
+               ) > $(call imgname,$(1),$(2)-firmware).bin; \
+       fi; fi
+endef
+
+define Image/Build/MyLoader
+       -$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) \
+               -p0x30000:0xc0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma  \
+               -p0xf0000:0:::rootfs:$(KDIR)/root.$(1) \
+               $(call imgname,$(1),$(2)).img
+endef
+
+define Image/Build/UBNT
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
+       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux-$(2) $(KDIR)/vmlinux-$(2).lzma
+       dd if=$(KDIR)/vmlinux-$(2).lzma of=$(KDIR)/vmlinux-$(2).bin.lzma bs=64k conv=sync
+       -$(STAGING_DIR_HOST)/bin/mkfwimage \
+               -B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
+               -k $(KDIR)/vmlinux-$(2).bin.lzma \
+               -r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
+               -o $(call imgname,$(1),$(2)).bin
+endef
+
+define Image/Build/Planex
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
+       gzip -9 -c $(KDIR)/vmlinux-$(2) > $(KDIR)/vmlinux-$(2).bin.gzip
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gzip"` -gt 1441792 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.gzip is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6356992 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.gzip $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1408k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=6208k conv=sync; \
+               ) > $(call imgname,$(1),$(2)).bin; \
+               $(STAGING_DIR_HOST)/bin/mkplanexfw \
+                       -B $(2) \
+                       -v 2.00.00 \
+                       -i $(call imgname,$(1),$(2)).bin \
+                       -o $(call imgname,$(1),$(2)).webui; \
+       fi; fi
+endef
+
+define Image/Build/TPLINK
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
+       gzip -9 -c $(KDIR)/vmlinux-$(2) > $(KDIR)/vmlinux-$(2).bin.gzip
+       -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+               -B $(4) -N OpenWrt -V $(REVISION)\
+               -k $(KDIR)/vmlinux-$(2).bin.gzip \
+               -r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
+               -o $(call imgname,$(1),$(2)).uni
+endef
+
+define Image/Build/CyberTAN
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
+       gzip -9 -c $(KDIR)/vmlinux-$(2) > $(KDIR)/vmlinux-$(2).bin.gzip
        mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
                0x80060000 \
                -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-               -d $(KDIR)/vmlinux.bin.gz $(BIN_DIR)/openwrt-$(BOARD)-uImage.gz
+               -d $(KDIR)/vmlinux-$(2).bin.gzip $(KDIR)/vmlinux-$(2).uImage
+       ( \
+               dd if=$(KDIR)/vmlinux-$(2).uImage bs=64k conv=sync; \
+               dd if=/dev/zero bs=1 count=65476; \
+               dd if=$(KDIR)/root.$(1) bs=64k; \
+       ) > $(KDIR)/vmlinux-$(2).image
+       $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/vmlinux-$(2).trx \
+               -f $(KDIR)/vmlinux-$(2).image
+       -$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(4) -g \
+               -i $(KDIR)/vmlinux-$(2).trx \
+               -o $(call imgname,$(1),$(2)).bin
+endef
+
+define Image/Build/Template/Compex
+       $(call Image/Build/MyLoader,$(1),$(2))
+endef
+
+define Image/Build/Template/Compex/squashfs
+       $(call Image/Build/Template/Compex,squashfs,$(1))
+endef
+
+define Image/Build/Template/WRT400N
+       $(call Image/Build/WRT400N,$(1),$(2),$(3),$(4))
+endef
+
+define Image/Build/Template/WRT400N/squashfs
+       $(call Image/Build/Template/WRT400N,squashfs,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/WRT400N/jffs2-64k
+       $(call Image/Build/Template/WRT400N,jffs2-64k,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/CyberTAN
+       $(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4))
+endef
+
+define Image/Build/Template/CyberTAN/squashfs
+       $(call Image/Build/Template/CyberTAN,squashfs,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/CyberTAN/jffs2-64k
+       $(call Image/Build/Template/CyberTAN,jffs2-64k,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/AP81
+       $(call Image/Build/AP81,$(1),$(2),$(3),$(4))
+endef
+
+define Image/Build/Template/AP81/squashfs
+       $(call Image/Build/Template/AP81,squashfs,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/AP83
+       $(call Image/Build/AP83,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/AP83/squashfs
+       $(call Image/Build/Template/AP83,squashfs,$(1),$(2))
+endef
+
+define Image/Build/Template/AP83/jffs2-64k
+       $(call Image/Build/Template/AP83,jffs2-64k,$(1),$(2))
+endef
+
+define Image/Build/Template/TPLINK
+       $(call Image/Build/TPLINK,$(1),$(2),$(3),$(4))
+endef
+
+define Image/Build/Template/TPLINK/squashfs
+       $(call Image/Build/Template/TPLINK,squashfs,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/TPLINK4K
+       $(call Image/Build/TPLINK,$(1),$(2),$(3),$(4))
+endef
+
+define Image/Build/Template/TPLINK4K/squashfs
+       $(call Image/Build/Template/TPLINK,squashfs-4k,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/UBNT
+       $(call Image/Build/UBNT,$(1),$(2),$(3),$(4),$(5),$(6))
+endef
+
+define Image/Build/Template/UBNT/squashfs
+       $(call Image/Build/Template/UBNT,squashfs,$(1),$(2),$(3),$(4),$(5))
+endef
+
+define Image/Build/Template/UBNT/jffs2-64k
+       $(call Image/Build/Template/UBNT,jffs2-64k,$(1),$(2),$(3),$(4),$(5))
+endef
+
+define Image/Build/Template/Planex
+       $(call Image/Build/Planex,$(1),$(2),$(3))
+endef
+
+define Image/Build/Template/Planex/squashfs
+       $(call Image/Build/Template/Planex,squashfs,$(1),$(2))
+endef
+
+define Image/Build/Template/Planex/jffs2-64k
+       $(call Image/Build/Template/Planex,jffs2-64k,$(1),$(2))
+endef
+
+define Image/Build/Profile/AP83
+       $(call Image/Build/Template/AP83/$(1),ap83,board=AP83)
+endef
+
+define Image/Build/Profile/WP543
+       $(call Image/Build/Template/Compex/$(1),wp543)
+endef
+
+define Image/Build/Profile/DIR615C1
+       $(call Image/Build/Template/AP81/$(1),dir-615c1,board=TEW-632BRP,"AP81-AR9130-RT-070614-02")
+endef
+
+define Image/Build/Profile/TEW632BRP
+       $(call Image/Build/Template/AP81/$(1),tew-632brp,board=TEW-632BRP,"AP81-AR9130-RT-070614-00")
+endef
+
+define Image/Build/Profile/TEW652BRP
+       $(call Image/Build/Template/AP81/$(1),tew-652brp,board=TEW-632BRP,"AP81-AR9130-RT-080609-05")
+endef
+
+define Image/Build/Profile/A02RBW300N
+       $(call Image/Build/Template/AP81/$(1),a02-rb-w300n,board=TEW-632BRP,"AP81-AR9130-RT-070614-03")
+endef
+
+define Image/Build/Profile/UBNTRS
+       $(call Image/Build/Template/UBNT/$(1),ubnt-rs,board=UBNT-RS,RS,RSx,ar7100)
+endef
+
+define Image/Build/Profile/UBNTRSPRO
+       $(call Image/Build/Template/UBNT/$(1),ubnt-rspro,board=UBNT-RSPRO,RSPRO,RSPRO,ar7100pro)
+endef
+
+define Image/Build/Profile/UBNTLSSR71
+       $(call Image/Build/Template/UBNT/$(1),ubnt-ls-sr71,board=UBNT-LS-SR71,LS-SR71,LS-SR71,ar7100)
+endef
+
+define Image/Build/Profile/UBNT
+       $(call Image/Build/Profile/UBNTRS,$(1))
+       $(call Image/Build/Profile/UBNTRSPRO,$(1))
+       $(call Image/Build/Profile/UBNTLSSR71,$(1))
+endef
+
+define Image/Build/Profile/MZKW04NU
+       $(call Image/Build/Template/Planex/$(1),mzk-w04nu,board=MZK-W04NU)
+endef
+
+define Image/Build/Profile/MZKW300NH
+       $(call Image/Build/Template/Planex/$(1),mzk-w300nh,board=MZK-W300NH)
+endef
+
+define Image/Build/Profile/TLWR741NDV1
+       $(call Image/Build/Template/TPLINK4K/$(1),tl-wr741ndv1,board=TL-WR741ND,TL-WR741NDv1)
+endef
+
+define Image/Build/Profile/TLWR841NDV3
+       $(call Image/Build/Template/TPLINK/$(1),tl-wr841ndv3,board=TL-WR941ND,TL-WR841NDv3)
+endef
+
+define Image/Build/Profile/TLWR941NDV2
+       $(call Image/Build/Template/TPLINK/$(1),tl-wr941ndv2,board=TL-WR941ND,TL-WR941NDv2)
+endef
+
+define Image/Build/Profile/WRT400N
+       $(call Image/Build/Template/WRT400N/$(1),wrt400n,board=WRT400N)
+endef
+
+define Image/Build/Profile/WRT160NL
+       $(call Image/Build/Template/CyberTAN/$(1),wrt160nl,board=WRT160NL,1.00.01)
+endef
+
+define Image/Build/Profile/Default
+       $(call Image/Build/Profile/AP83,$(1))
+       $(call Image/Build/Profile/A02RBW300N,$(1))
+       $(call Image/Build/Profile/DIR615C1,$(1))
+       $(call Image/Build/Profile/MZKW04NU,$(1))
+       $(call Image/Build/Profile/MZKW300NH,$(1))
+       $(call Image/Build/Profile/TEW632BRP,$(1))
+       $(call Image/Build/Profile/TEW652BRP,$(1))
+       $(call Image/Build/Profile/TLWR741NDV1,$(1))
+       $(call Image/Build/Profile/TLWR841NDV3,$(1))
+       $(call Image/Build/Profile/TLWR941NDV2,$(1))
+       $(call Image/Build/Profile/UBNT,$(1))
+       $(call Image/Build/Profile/WP543,$(1))
+       $(call Image/Build/Profile/WRT400N,$(1))
+       $(call Image/Build/Profile/WRT160NL,$(1))
+endef
+
+define Image/Build/Profile/Madwifi
+       $(call Image/Build/Profile/UBNT,$(1))
+       $(call Image/Build/Profile/WP543,$(1))
 endef
 
 define Image/Build/squashfs
-    $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+       dd if=$(KDIR)/root.squashfs of=$(IMGNAME)-root.squashfs-4k bs=4k conv=sync
+       $(call add_jffs2_mark,$(IMGNAME)-root.squashfs-4k)
+       $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
 endef
 
 define Image/Build
        $(call Image/Build/$(1))
-       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
-endef
+       dd if=$(KDIR)/root.$(1) of=$(IMGNAME)-root.$(1) bs=128k conv=sync
 
+       $(call Image/Build/Profile/$(PROFILE),$(1))
+endef
 
 $(eval $(call BuildImage))
This page took 0.029098 seconds and 4 git commands to generate.