ar71xx: add support for the Senao EAP7660D board
[openwrt.git] / target / linux / ar71xx / image / Makefile
index 67764d6..fc93a17 100644 (file)
@@ -1,5 +1,5 @@
-# 
-# Copyright (C) 2008 OpenWrt.org
+#
+# Copyright (C) 2008-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+define imgname
+$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
+endef
+
+VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
+UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
+fs_squash:=squashfs-only
+fs_all:=all
+fs_4k:=4k
+fs_64k:=64k
+fs_128k:=128k
+ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+       fs_squash:=initramfs
+       fs_all:=initramfs
+       fs_4k:=initramfs
+       fs_64k:=initramfs
+       fs_128k:=initramfs
+       VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux-initramfs
+       UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage-initramfs
+endif
+
+define CompressLzma
+  $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
+endef
+
+define PatchKernelLzma
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
+       $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
+endef
+
+define PatchKernelGzip
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
+       gzip -9 -c $(KDIR)/vmlinux-$(1) > $(KDIR)/vmlinux-$(1).bin.gz
+endef
+
+define MkImageLzma
+       mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma \
+               -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $(1) $(2)
+endef
+
+define MkImageGzip
+       mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip \
+               -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $(1) $(2)
+endef
+
 define Image/BuildKernel
-       cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.elf
+       cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
+       cp $(KDIR)/vmlinux $(VMLINUX).bin
        gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
-       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
-       dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(BOARD)-vmlinux.lzma bs=65536 conv=sync
-       dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(BOARD)-vmlinux.gz bs=65536 conv=sync
-       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma
-       mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
-               0x80060000 \
+       $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
+       dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
+       dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync
+       $(call MkImageGzip,$(KDIR)/vmlinux.bin.gz,$(UIMAGE)-gzip.bin)
+       $(call MkImageLzma,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
+       $(call Image/Build/Initramfs)
+endef
+
+define Image/Build/WRT400N
+       $(call PatchKernelLzma,$(2),$(3))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1310720 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6488064 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+               wrt400n $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call imgname,$(1),$(2))-factory.bin; \
+       fi; fi
+endef
+
+dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,1600k(unknown)ro,6208k@0x50000(firmware)
+define Image/Build/DIR825B1
+       $(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1048576 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 5308416 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+               ( \
+                       dd if=$(call imgname,$(1),$(2))-sysupgrade.bin; \
+                       echo -n "01AP94-AR7161-RT-080619-00"; \
+               ) > $(call imgname,$(1),$(2))-backup-loader.bin; \
+               if [ `stat -c%s $(call imgname,$(1),$(2))-sysupgrade.bin` -gt 4194304 ]; then \
+                       echo "Warning: $(call imgname,$(1),$(2))-sysupgrade.bin is too big"; \
+               else \
+                       ( \
+                               dd if=$(call imgname,$(1),$(2))-sysupgrade.bin bs=4096k conv=sync; \
+                               echo -n "00AP94-AR7161-RT-080619-00"; \
+                       ) > $(call imgname,$(1),$(2))-factory.bin; \
+               fi; \
+       fi; fi
+endef
+
+define Image/Build/WZRHPG300NH
+       $(call PatchKernelLzma,$(2),$(3))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1048576 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 31850496 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+               ( \
+                       echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
+                       dd if=$(call imgname,$(1),$(2))-sysupgrade.bin; \
+               ) > $(call imgname,$(1),$(2))-tftp.bin; \
+       fi; fi
+endef
+
+cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2944k(rootfs),64k(art)ro,3840k@0x30000(firmware)
+define Image/Build/Cameo
+       $(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2949120 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=2880k conv=sync; \
+                       echo -n $(4); \
+               ) > $(call imgname,$(1),$(2))-factory.bin; \
+       fi; fi
+endef
+
+cameo7240_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,896k(kernel),2816k(rootfs),64k(mac)ro,64k(art)ro,3712k@0x40000(firmware)
+define Image/Build/Cameo7240
+       $(call PatchKernelLzma,$(2),$(3) $(cameo7240_mtdlayout))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=2752k conv=sync; \
+                       echo -n $(4); \
+               ) > $(call imgname,$(1),$(2))-factory.bin; \
+       fi; fi
+endef
+
+define Image/Build/AP83
+       $(call PatchKernelGzip,$(2),$(3))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1310720 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6619136 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.gz \
+                       $(KDIR)/vmlinux-$(2).uImage; \
+               dd if=$(KDIR)/vmlinux-$(2).uImage \
+                       of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
+               dd if=$(KDIR)/root.$(1) \
+                       of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
+                       dd if=$(KDIR)/root.$(1); \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+       fi; fi
+endef
+
+define Image/Build/PB92
+       $(call PatchKernelLzma,$(2),$(3))
+       if [ `stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma` -gt 917504 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       elif [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma \
+                       $(KDIR)/vmlinux-$(2).uImage; \
+               dd if=$(KDIR)/vmlinux-$(2).uImage \
+                       of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
+               dd if=$(KDIR)/root.$(1) \
+                       of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+                       dd if=$(KDIR)/root.$(1); \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+       fi
+endef
+
+define Image/Build/PB4X
+       $(call PatchKernelLzma,$(2),$(3))
+       dd if=$(KDIR)/vmlinux-$(2).bin.lzma \
+          of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
+       dd if=$(KDIR)/root.$(1) \
+          of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
+       -sh $(TOPDIR)/scripts/combined-image.sh \
+               "$(call imgname,kernel,$(2)).bin" \
+               "$(call imgname,$(1),$(2)-rootfs).bin" \
+               $(call imgname,$(1),$(2))-sysupgrade.bin
+endef
+
+define Image/Build/MyLoader
+       -$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(3) \
+               -p0x030000:0xe0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
+               -p0x110000:0:::rootfs:$(KDIR)/root.$(1) \
+               $(call imgname,$(1),$(2))-$(4)-factory.img
+endef
+
+ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1024k(kernel),6528k(rootfs),256k(cfg)ro,64k(EEPROM)ro,7552k@0x50000(firmware)
+define Image/Build/UBNTXM
+       $(call PatchKernelLzma,$(2),$(3) $(ubntxm_mtdlayout))
+       $(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage.bin)
+       dd if=$(KDIR)/vmlinux-$(2).uImage.bin of=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync
+       -$(STAGING_DIR_HOST)/bin/mkfwimage \
+               -B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
+               -k $(KDIR)/vmlinux-$(2).uImage \
+               -r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
+               -o $(call imgname,$(1),$(2))-factory.bin
+       ( \
+               dd if=$(KDIR)/vmlinux-$(2).uImage; \
+               dd if=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1); \
+       ) > $(call imgname,$(1),$(2))-sysupgrade.bin
+endef
+
+define Image/Build/UBNT
+       $(call PatchKernelLzma,$(2),$(3))
+       dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).lzma bs=64k conv=sync
+       -$(STAGING_DIR_HOST)/bin/mkfwimage \
+               -B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
+               -k $(KDIR)/vmlinux-$(2).lzma \
+               -r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
+               -o $(call imgname,$(1),$(2))-factory.bin
+       -sh $(TOPDIR)/scripts/combined-image.sh \
+               "$(KDIR)/vmlinux-$(2).lzma" \
+               "$(BIN_DIR)/$(IMG_PREFIX)-root.$(1)" \
+               $(call imgname,$(1),$(2))-sysupgrade.bin
+endef
+
+define Image/Build/Planex
+       $(call PatchKernelGzip,$(2),$(3))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1441792 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6356992 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.gz $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1408k conv=sync; \
+                       dd if=$(KDIR)/root.$(1); \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+               $(STAGING_DIR_HOST)/bin/mkplanexfw \
+                       -B $(2) \
+                       -v 2.00.00 \
+                       -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+                       -o $(call imgname,$(1),$(2))-factory.bin; \
+       fi; fi
+endef
+
+define Image/Build/TPLINK
+       $(call PatchKernelGzip,$(2),$(3))
+       -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+               -B $(4) -N OpenWrt -V $(REVISION)\
+               -k $(KDIR)/vmlinux-$(2).bin.gz \
+               -r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
+               -o $(call imgname,$(1),$(2))-factory.bin
+       -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+               -B $(4) -N OpenWrt -V $(REVISION) -s \
+               -k $(KDIR)/vmlinux-$(2).bin.gz \
+               -r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
+               -o $(call imgname,$(1),$(2))-sysupgrade.bin
+endef
+
+define Image/Build/TPLINK/initramfs
+       $(call PatchKernelGzip,$(2),$(3))
+       -$(STAGING_DIR_HOST)/bin/mktplinkfw -c \
+               -B $(4) -N OpenWrt -V $(REVISION) -s \
+               -k $(KDIR)/vmlinux-$(2).bin.gz \
+               -o $(call imgname,$(1),$(2))-uImage.bin
+endef
+
+define Image/Build/CyberTAN
+       $(call PatchKernelGzip,$(2),$(3))
+       $(call MkImageGzip,$(KDIR)/vmlinux-$(2).bin.gz,$(KDIR)/vmlinux-$(2).uImage)
+       $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR)/vmlinux-$(2).uImage \
+               -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1)
+       -$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(4) \
+               -i $(KDIR)/image.tmp \
+               -o $(call imgname,$(1),$(2))-sysupgrade.bin
+       -$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(4) -g \
+               -i $(KDIR)/image.tmp \
+               -o $(call imgname,$(1),$(2))-factory.bin
+       rm $(KDIR)/image.tmp
+endef
+
+wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),6656k(rootfs),64k(art)ro,7680k@0x70000(firmware)
+define Image/Build/WNDR3700
+       $(call PatchKernelLzma,$(2),$(3) $(wndr3700_mtdlayout))
+       $(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage)
+       mkdir -p $(KDIR)/wndr3700/image
+       $(STAGING_DIR_HOST)/bin/wndr3700 \
+               $(KDIR)/vmlinux-$(2).uImage \
+               $(KDIR)/wndr3700/image/uImage
+       $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
+               $(KDIR)/wndr3700 $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp \
+               -nopad -noappend -root-owned -be
+       -rm -rf $(KDIR)/wndr3700
+       mkimage -A mips -O linux -T filesystem -C none \
+               -a 0xbf070000 -e 0xbf070000 \
                -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-               -d $(KDIR)/vmlinux.bin.gz $(BIN_DIR)/openwrt-$(BOARD)-uImage.gz
+               -d $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp \
+               $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp2
+       $(STAGING_DIR_HOST)/bin/wndr3700 \
+               $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp2 \
+               $(KDIR)/vmlinux-$(2).uImage.squashfs
+       -rm -f $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp*
+       ( \
+               dd if=$(KDIR)/vmlinux-$(2).uImage.squashfs bs=1024k conv=sync; \
+               dd if=$(KDIR)/root.$(1) bs=64k; \
+       ) > $(call imgname,$(1),$(2))-sysupgrade.bin
+       $(STAGING_DIR_HOST)/bin/mkdniimg \
+               -B WNDR3700 -v OpenWrt.$(REVISION) \
+               -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+               -o $(call imgname,$(1),$(2))-factory.img
+endef
+
+define Image/Build/WNDR3700/initramfs
+       $(call PatchKernelLzma,$(2),$(3) $(wndr3700_mtdlayout))
+       $(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage)
+       $(STAGING_DIR_HOST)/bin/wndr3700 \
+               $(KDIR)/vmlinux-$(2).uImage \
+               $(call imgname,$(1),$(2))-uImage.bin
+endef
+
+define Image/Build/Template/initramfs/initramfs
+       $(call Image/Build/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/all/squashfs
+       $(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/all/jffs2-64k
+       $(call Image/Build/$(1),jffs2-64k,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/all/jffs2-128k
+       $(call Image/Build/$(1),jffs2-128k,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/squashfs-only/squashfs
+       $(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/4k/squashfs
+       $(call Image/Build/$(1),squashfs-4k,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/64k/squashfs
+       $(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/64k/jffs2-64k
+       $(call Image/Build/$(1),jffs2-64k,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/128k/squashfs
+       $(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/128k/jffs2-128k
+       $(call Image/Build/$(1),jffs2-128k,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Profile/AP81
+       $(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap81,board=AP81)
+endef
+
+define Image/Build/Profile/AP83
+       $(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap83,board=AP83)
+endef
+
+define Image/Build/Profile/PB42
+       $(call Image/Build/Template/$(fs_64k)/$(1),PB4X,pb42,board=PB42)
+endef
+
+define Image/Build/Profile/PB44
+       $(call Image/Build/Template/$(fs_64k)/$(1),PB4X,pb44,board=PB44)
+endef
+
+define Image/Build/Profile/PB92
+       $(call Image/Build/Template/$(fs_64k)/$(1),PB92,pb92,board=PB92)
+endef
+
+define Image/Build/Profile/WP543
+       $(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x200000,2M)
+       $(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x400000,4M)
+       $(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x800000,8M)
+       $(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x1000000,16M)
+endef
+
+define Image/Build/Profile/DIR600A1
+       $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,board=DIR-600-A1,"AP91-AR7240-RT-090223-00")
+endef
+
+define Image/Build/Profile/EAP7660D
+       $(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,board=EAP7660D)
+endef
+
+define Image/Build/Profile/FR54RTR
+       $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,fr-54rtr,board=DIR-600-A1,"AP91-AR7240-RT-090223-01")
+endef
+
+define Image/Build/Profile/DIR615C1
+       $(call Image/Build/Template/$(fs_squash)/$(1),Cameo,dir-615-c1,board=DIR-615-C1,"AP81-AR9130-RT-070614-02")
+endef
+
+define Image/Build/Profile/TEW632BRP
+       $(call Image/Build/Template/$(fs_squash)/$(1),Cameo,tew-632brp,board=TEW-632BRP,"AP81-AR9130-RT-070614-00")
+endef
+
+define Image/Build/Profile/TEW652BRP
+       $(call Image/Build/Template/$(fs_squash)/$(1),Cameo,tew-652brp,board=TEW-632BRP,"AP81-AR9130-RT-080609-05")
+endef
+
+define Image/Build/Profile/A02RBW300N
+       $(call Image/Build/Template/$(fs_squash)/$(1),Cameo,a02-rb-w300n,board=TEW-632BRP,"AP81-AR9130-RT-070614-03")
+endef
+
+define Image/Build/Profile/UBNTRS
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-rs,board=UBNT-RS,RS,RSx,ar7100)
+endef
+
+define Image/Build/Profile/UBNTRSPRO
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-rspro,board=UBNT-RSPRO,RSPRO,RSPRO,ar7100pro)
+endef
+
+define Image/Build/Profile/UBNTLSSR71
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-ls-sr71,board=UBNT-LS-SR71,LS-SR71,LS-SR71,ar7100)
+endef
+
+define Image/Build/Profile/UBNTBULLETM
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-bullet-m,board=UBNT-BM,XM,UBNTXM,ar7240)
+endef
+
+define Image/Build/Profile/UBNTROCKETM
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-rocket-m,board=UBNT-RM,XM,UBNTXM,ar7240)
+endef
+
+define Image/Build/Profile/UBNTNANOM
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-nano-m,board=UBNT-NM,XM,UBNTXM,ar7240)
+endef
+
+define Image/Build/Profile/UBNT
+       $(call Image/Build/Profile/UBNTRS,$(1))
+       $(call Image/Build/Profile/UBNTRSPRO,$(1))
+       $(call Image/Build/Profile/UBNTLSSR71,$(1))
+       $(call Image/Build/Profile/UBNTBULLETM,$(1))
+       $(call Image/Build/Profile/UBNTROCKETM,$(1))
+       $(call Image/Build/Profile/UBNTNANOM,$(1))
+endef
+
+define Image/Build/Profile/MZKW04NU
+       $(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w04nu,board=MZK-W04NU)
+endef
+
+define Image/Build/Profile/MZKW300NH
+       $(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w300nh,board=MZK-W300NH)
+endef
+
+define Image/Build/Profile/TLWR741NDV1
+       $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr741nd-v1,board=TL-WR741ND,TL-WR741NDv1)
+endef
+
+define Image/Build/Profile/TLWR841NV15
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr841n-v1.5,board=TL-WR841N-v1.5,TL-WR841Nv1.5)
+endef
+
+define Image/Build/Profile/TLWR841NDV3
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr841nd-v3,board=TL-WR941ND,TL-WR841NDv3)
+endef
+
+define Image/Build/Profile/TLWR841NDV5
+       $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr841nd-v5,board=TL-WR741ND,TL-WR841NDv5)
+endef
+
+define Image/Build/Profile/TLWR941NDV2
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr941nd-v2,board=TL-WR941ND,TL-WR941NDv2)
+endef
+
+define Image/Build/Profile/TLWR941NDV3
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr941nd-v3,board=TL-WR941ND,TL-WR941NDv2)
+endef
+
+define Image/Build/Profile/TLWR941NDV4
+       $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr941nd-v4,board=TL-WR741ND,TL-WR941NDv4)
+endef
+
+define Image/Build/Profile/TLWR1043NDV1
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr1043nd-v1,board=TL-WR1043ND,TL-WR1043NDv1)
+endef
+
+define Image/Build/Profile/WNDR3700
+       $(call Image/Build/Template/$(fs_64k)/$(1),WNDR3700,wndr3700,board=WNDR3700)
+endef
+
+define Image/Build/Profile/WRT400N
+       $(call Image/Build/Template/$(fs_64k)/$(1),WRT400N,wrt400n,board=WRT400N)
+endef
+
+define Image/Build/Profile/DIR825B1
+       $(call Image/Build/Template/$(fs_64k)/$(1),DIR825B1,dir-825-b1,board=DIR-825-B1)
+endef
+
+define Image/Build/Profile/WRT160NL
+       $(call Image/Build/Template/$(fs_64k)/$(1),CyberTAN,wrt160nl,board=WRT160NL,1.00.01)
+endef
+
+define Image/Build/Profile/WZRHPG300NH
+       $(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG300NH,wzr-hp-g300nh,board=WZR-HP-G300NH)
+endef
+
+define Image/Build/Profile/Default
+       $(call Image/Build/Profile/AP81,$(1))
+       $(call Image/Build/Profile/AP83,$(1))
+       $(call Image/Build/Profile/A02RBW300N,$(1))
+       $(call Image/Build/Profile/DIR600A1,$(1))
+       $(call Image/Build/Profile/DIR615C1,$(1))
+       $(call Image/Build/Profile/DIR825B1,$(1))
+       $(call Image/Build/Profile/EAP7660D,$(1))
+       $(call Image/Build/Profile/FR54RTR,$(1))
+       $(call Image/Build/Profile/MZKW04NU,$(1))
+       $(call Image/Build/Profile/MZKW300NH,$(1))
+       $(call Image/Build/Profile/PB42,$(1))
+       $(call Image/Build/Profile/PB44,$(1))
+       $(call Image/Build/Profile/PB92,$(1))
+       $(call Image/Build/Profile/TEW632BRP,$(1))
+       $(call Image/Build/Profile/TEW652BRP,$(1))
+       $(call Image/Build/Profile/TLWR741NDV1,$(1))
+       $(call Image/Build/Profile/TLWR841NV15,$(1))
+       $(call Image/Build/Profile/TLWR841NDV3,$(1))
+       $(call Image/Build/Profile/TLWR841NDV5,$(1))
+       $(call Image/Build/Profile/TLWR941NDV2,$(1))
+       $(call Image/Build/Profile/TLWR941NDV3,$(1))
+       $(call Image/Build/Profile/TLWR941NDV4,$(1))
+       $(call Image/Build/Profile/TLWR1043NDV1,$(1))
+       $(call Image/Build/Profile/UBNT,$(1))
+       $(call Image/Build/Profile/WP543,$(1))
+       $(call Image/Build/Profile/WNDR3700,$(1))
+       $(call Image/Build/Profile/WRT400N,$(1))
+       $(call Image/Build/Profile/WRT160NL,$(1))
+       $(call Image/Build/Profile/WZRHPG300NH,$(1))
+endef
+
+define Image/Build/Profile/Minimal
+       $(call Image/Build/Profile/Default,$(1))
+endef
+
+define Image/Build/Profile/Madwifi
+       $(call Image/Build/Profile/EAP7660D,$(1))
+       $(call Image/Build/Profile/UBNTRS,$(1))
+       $(call Image/Build/Profile/UBNTRSPRO,$(1))
+       $(call Image/Build/Profile/UBNTLSSR71,$(1))
+       $(call Image/Build/Profile/WP543,$(1))
 endef
 
 define Image/Build/squashfs
-    $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+       $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+       dd if=$(KDIR)/root.squashfs of=$(KDIR)/root.squashfs-4k.tmp0 bs=4k conv=sync
+       $(call add_jffs2_mark,$(KDIR)/root.squashfs-4k.tmp0)
+       dd if=$(KDIR)/root.squashfs-4k.tmp0 of=$(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-4k bs=4k conv=sync
+       $(call add_jffs2_mark,$(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-4k)
+       rm -f $(KDIR)/root.squashfs-4k.tmp0
+endef
+
+define Image/Build/Initramfs
+       $(call Image/Build/Profile/$(PROFILE),initramfs)
 endef
 
 define Image/Build
        $(call Image/Build/$(1))
-       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
-endef
+       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
 
+       $(call Image/Build/Profile/$(PROFILE),$(1))
+endef
 
 $(eval $(call BuildImage))
This page took 0.035281 seconds and 4 git commands to generate.