revert bluetooth kconfig change - it doesn't work that way
[openwrt.git] / package / broadcom-diag / src / diag.c
index 7c6e303..a47d139 100644 (file)
@@ -18,7 +18,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  *
- * $Id:$
+ * $Id$
  */
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -54,6 +54,7 @@ enum {
        WRT54G,
        WRTSL54GS,
        WRT54G3G,
+       WRT350N,
        
        /* ASUS */
        WLHDD,
@@ -61,7 +62,9 @@ enum {
        WL500G,
        WL500GD,
        WL500GP,
+       WL500W,
        ASUS_4702,
+       WL700GE,
        
        /* Buffalo */
        WBR2_G54,
@@ -69,6 +72,9 @@ enum {
        WHR_HP_G54,
        WHR2_A54G54,
        WLA2_G54L,
+       WZR_G300N,
+       WZR_RS_G54,
+       WZR_RS_G54HP,
        BUFFALO_UNKNOWN,
        BUFFALO_UNKNOWN_4710,
 
@@ -89,8 +95,31 @@ enum {
 
        /* Belkin */
        BELKIN_UNKNOWN,
+
+       /* Netgear */
+       WGT634U,
+
+       /* Trendware */
+       TEW411BRPP,
+       
+       /* SimpleTech */
+       STI_NAS,
 };
 
+static void __init bcm4780_init(void) {
+               int pin = 1 << 3;
+
+               /* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
+               printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);
+
+               /* Wait 5s, so the HDD can spin up */
+               set_current_state(TASK_INTERRUPTIBLE);
+               schedule_timeout(HZ * 5);
+}
+
 static struct platform_t __initdata platforms[] = {
        /* Linksys */
        [WAP54GV1] = {
@@ -147,7 +176,7 @@ static struct platform_t __initdata platforms[] = {
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
-                       { .name = "dmz",        .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "dmz",        .gpio = 1 << 0, .polarity = REVERSE },
                        { .name = "ses_white",  .gpio = 1 << 5, .polarity = REVERSE },
                        { .name = "ses_orange", .gpio = 1 << 7, .polarity = REVERSE },
                },
@@ -166,6 +195,17 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
                },
        },
+       [WRT350N] = {
+               .name           = "Linksys WRT350N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 8 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "ses",        .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
        /* Asus */
        [WLHDD] = {
                .name           = "ASUS WL-HDD",
@@ -174,6 +214,7 @@ static struct platform_t __initdata platforms[] = {
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "usb",        .gpio = 1 << 2, .polarity = NORMAL },
                },
        },
        [WL300G] = {
@@ -213,6 +254,16 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 1, .polarity = REVERSE },
                },
        },
+       [WL500W] = {
+               .name           = "ASUS WL-500W",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
+               },
+       },
        [ASUS_4702] = {
                .name           = "ASUS (unknown, BCM4702)",
                .buttons        = {
@@ -222,6 +273,25 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
                },
        },
+       [WL700GE] = {
+               .name           = "ASUS WL-700gE",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
+                       { .name = "ses",        .gpio = 1 << 4 }, // on back, actual name ezsetup
+                       { .name = "power",      .gpio = 1 << 0 }, // on front
+                       { .name = "copy",       .gpio = 1 << 6 }, // on front
+               },
+               .leds           = {
+#if 0
+                       // GPIO that controls power led also enables/disables some essential functions
+                       // - power to HDD
+                       // - switch leds
+                       { .name = "power",      .gpio = 1 << 3, .polarity = NORMAL },  // actual name power
+#endif
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
+               },
+               .platform_init = bcm4780_init,
+       },
        /* Buffalo */
        [WHR_G54S] = {
                .name           = "Buffalo WHR-G54S",
@@ -279,6 +349,41 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
                },
        },
+       [WZR_G300N] = {
+               .name           = "Buffalo WZR-G300N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "bridge",     .gpio = 1 << 1, .polarity = REVERSE },
+                       { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
+               },
+       },
+       [WZR_RS_G54] = {
+               .name           = "Buffalo WZR-RS-G54",
+               .buttons        = {
+                       { .name = "ses",        .gpio = 1 << 0 },
+                       { .name = "reset",      .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
+                       { .name = "vpn",        .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
+       [WZR_RS_G54HP] = {
+               .name           = "Buffalo WZR-RS-G54HP",
+               .buttons        = {
+                       { .name = "ses",        .gpio = 1 << 0 },
+                       { .name = "reset",      .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
+                       { .name = "vpn",        .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
        [BUFFALO_UNKNOWN] = {
                .name           = "Buffalo (unknown)",
                .buttons        = {
@@ -337,7 +442,8 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "reset",      .gpio = 1 << 0 },
                },
                .leds           = {
-                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 6, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
                },
        },
        /* Motorola */
@@ -390,6 +496,40 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "connected",  .gpio = 1 << 0, .polarity = NORMAL },
                },
        },
+       /* Netgear */
+       [WGT634U] = {
+               .name           = "Netgear WGT634U",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
+       /* Trendware */
+       [TEW411BRPP] = {
+               .name           = "Trendware TEW411BRP+",
+               .buttons        = {
+                       { /* No usable buttons */ },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 7, .polarity = NORMAL },
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "bridge",     .gpio = 1 << 6, .polarity = NORMAL },
+               },
+       },
+       /* SimpleTech */
+       [STI_NAS] = {
+               .name      = "SimpleTech SimpleShare NAS",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
+                       { .name = "power",      .gpio = 1 << 0 }, // on back
+               },
+               .leds      = {
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
+               },
+               .platform_init = bcm4780_init,
+       },
 };
 
 static struct platform_t __init *platform_detect(void)
@@ -398,10 +538,20 @@ static struct platform_t __init *platform_detect(void)
 
        boardnum = getvar("boardnum");
        boardtype = getvar("boardtype");
+
+       if (strcmp(getvar("nvram_type"), "cfe") == 0)
+               return &platforms[WGT634U];
+       
+       if (strncmp(getvar("model_no"), "WL700",5) == 0)
+               return &platforms[WL700GE];
+
        if (strncmp(getvar("pmon_ver"), "CFE", 3) == 0) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
-                       if (!strcmp(boardtype, "0x0101"))
+                       if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
+                               return &platforms[WRT350N];
+
+                       if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6"))
                                return &platforms[WRT54G3G];
 
                        if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
@@ -414,6 +564,8 @@ static struct platform_t __init *platform_detect(void)
                if (!strcmp(boardnum, "45")) { /* ASUS */
                        if (!strcmp(boardtype,"0x042f"))
                                return &platforms[WL500GP];
+                       else if (!strcmp(boardtype,"0x0472"))
+                               return &platforms[WL500W];
                        else
                                return &platforms[WL500GD];
                }
@@ -421,6 +573,18 @@ static struct platform_t __init *platform_detect(void)
                if (!strcmp(boardnum, "10496"))
                        return &platforms[USR5461];
        } else { /* PMON based - old stuff */
+
+               /* Dell TrueMobile 2300 */
+               if (!strcmp(getvar("ModelId"),"WX-5565"))
+                       return &platforms[TM2300];
+       
+               if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
+                       (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
+                       if (!strncmp(getvar("ModelId"),"WE800G", 6))
+                               return &platforms[WE800G];
+                       else
+                               return &platforms[WR850GV1];
+               }
                if (!strncmp(boardtype, "bcm94710dev", 11)) {
                        if (!strcmp(boardnum, "42"))
                                return &platforms[WRT54GV1];
@@ -442,14 +606,6 @@ static struct platform_t __init *platform_detect(void)
                /* unknown asus stuff, probably bcm4702 */
                if (!strncmp(boardnum, "asusX", 5))
                        return &platforms[ASUS_4702];
-
-               if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
-                       (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
-                       if (!strncmp(getvar("ModelId"),"WE800G", 6))
-                               return &platforms[WE800G];
-                       else
-                               return &platforms[WR850GV1];
-               }
        }
 
        if ((buf = (nvram_get("melco_id") ?: nvram_get("buffalo_id")))) {
@@ -464,6 +620,12 @@ static struct platform_t __init *platform_detect(void)
                        return &platforms[WHR_G54S];
                if (!strcmp(buf, "290441dd"))
                        return &platforms[WHR2_A54G54];
+               if (!strcmp(buf, "31120"))
+                       return &platforms[WZR_G300N];
+               if (!strcmp(buf, "30083"))
+                       return &platforms[WZR_RS_G54];
+               if (!strcmp(buf, "30103"))
+                       return &platforms[WZR_RS_G54HP];
        }
 
        if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
@@ -473,13 +635,19 @@ static struct platform_t __init *platform_detect(void)
                        return &platforms[BUFFALO_UNKNOWN];
        }
 
-
        if (!strcmp(getvar("CFEver"), "MotoWRv203") ||
                !strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) {
 
                return &platforms[WR850GV2V3];
        }
 
+       if (!strcmp(boardnum, "44")) {  /* Trendware TEW-411BRP+ */
+               return &platforms[TEW411BRPP];
+       }
+
+       if (!strncmp(boardnum, "04FN52", 6)) /* SimpleTech SimpleShare */
+               return &platforms[STI_NAS];
+
        /* not found */
        return NULL;
 }
@@ -527,6 +695,8 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
        changed = platform.button_polarity ^ in;
        platform.button_polarity = in;
 
+       changed &= ~gpio_outen(0, 0);
+
        for (b = platform.buttons; b->name; b++) { 
                struct event_t *event;
 
@@ -775,6 +945,9 @@ static int __init diag_init(void)
        memcpy(&platform, detected, sizeof(struct platform_t));
 
        printk(MODULE_NAME ": Detected '%s'\n", platform.name);
+       if (platform.platform_init != NULL) {
+               platform.platform_init();
+       }
 
        if (!(diag = proc_mkdir("diag", NULL))) {
                printk(MODULE_NAME ": proc_mkdir on /proc/diag failed\n");
This page took 0.029073 seconds and 4 git commands to generate.