ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / rt305x.c
index 002aaeb..5916888 100644 (file)
@@ -1,7 +1,7 @@
 /*
  * Ralink RT305x SoC specific setup
  *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  * Parts of this file are based on Ralink's 2.6.21 BSP
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-ralink/common.h>
+#include <asm/mach-ralink/ramips_gpio.h>
 #include <asm/mach-ralink/rt305x.h>
 #include <asm/mach-ralink/rt305x_regs.h>
 
-unsigned long rt305x_cpu_freq;
-EXPORT_SYMBOL_GPL(rt305x_cpu_freq);
-
-unsigned long rt305x_sys_freq;
-EXPORT_SYMBOL_GPL(rt305x_sys_freq);
-
 void __iomem * rt305x_sysc_base;
 void __iomem * rt305x_memc_base;
 
@@ -49,24 +43,76 @@ void __init rt305x_detect_sys_type(void)
                (id & CHIP_ID_REV_MASK));
 }
 
-void __init rt305x_detect_sys_freq(void)
-{
-       u32     t;
-
-       t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG);
-       t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
-
-       switch (t) {
-       case SYSTEM_CONFIG_CPUCLK_320:
-               rt305x_cpu_freq = 320000000;
-               break;
-       case SYSTEM_CONFIG_CPUCLK_384:
-               rt305x_cpu_freq = 384000000;
-               break;
-       }
-
-       rt305x_sys_freq = rt305x_cpu_freq / 3;
-}
+static struct ramips_gpio_chip rt305x_gpio_chips[] = {
+       {
+               .chip = {
+                       .label  = "RT305X-GPIO0",
+                       .base   = 0,
+                       .ngpio  = 24,
+               },
+               .regs = {
+                       [RAMIPS_GPIO_REG_INT]   = 0x00,
+                       [RAMIPS_GPIO_REG_EDGE]  = 0x04,
+                       [RAMIPS_GPIO_REG_RENA]  = 0x08,
+                       [RAMIPS_GPIO_REG_FENA]  = 0x0c,
+                       [RAMIPS_GPIO_REG_DATA]  = 0x20,
+                       [RAMIPS_GPIO_REG_DIR]   = 0x24,
+                       [RAMIPS_GPIO_REG_POL]   = 0x28,
+                       [RAMIPS_GPIO_REG_SET]   = 0x2c,
+                       [RAMIPS_GPIO_REG_RESET] = 0x30,
+                       [RAMIPS_GPIO_REG_TOGGLE] = 0x34,
+               },
+               .map_base = RT305X_PIO_BASE,
+               .map_size = RT305X_PIO_SIZE,
+       },
+       {
+               .chip = {
+                       .label  = "RT305X-GPIO1",
+                       .base   = 24,
+                       .ngpio  = 16,
+               },
+               .regs = {
+                       [RAMIPS_GPIO_REG_INT]   = 0x38,
+                       [RAMIPS_GPIO_REG_EDGE]  = 0x3c,
+                       [RAMIPS_GPIO_REG_RENA]  = 0x40,
+                       [RAMIPS_GPIO_REG_FENA]  = 0x44,
+                       [RAMIPS_GPIO_REG_DATA]  = 0x48,
+                       [RAMIPS_GPIO_REG_DIR]   = 0x4c,
+                       [RAMIPS_GPIO_REG_POL]   = 0x50,
+                       [RAMIPS_GPIO_REG_SET]   = 0x54,
+                       [RAMIPS_GPIO_REG_RESET] = 0x58,
+                       [RAMIPS_GPIO_REG_TOGGLE] = 0x5c,
+               },
+               .map_base = RT305X_PIO_BASE,
+               .map_size = RT305X_PIO_SIZE,
+       },
+       {
+               .chip = {
+                       .label  = "RT305X-GPIO2",
+                       .base   = 40,
+                       .ngpio  = 12,
+               },
+               .regs = {
+                       [RAMIPS_GPIO_REG_INT]   = 0x60,
+                       [RAMIPS_GPIO_REG_EDGE]  = 0x64,
+                       [RAMIPS_GPIO_REG_RENA]  = 0x68,
+                       [RAMIPS_GPIO_REG_FENA]  = 0x6c,
+                       [RAMIPS_GPIO_REG_DATA]  = 0x70,
+                       [RAMIPS_GPIO_REG_DIR]   = 0x74,
+                       [RAMIPS_GPIO_REG_POL]   = 0x78,
+                       [RAMIPS_GPIO_REG_SET]   = 0x7c,
+                       [RAMIPS_GPIO_REG_RESET] = 0x80,
+                       [RAMIPS_GPIO_REG_TOGGLE] = 0x84,
+               },
+               .map_base = RT305X_PIO_BASE,
+               .map_size = RT305X_PIO_SIZE,
+       },
+};
+
+static struct ramips_gpio_data rt305x_gpio_data = {
+       .chips = rt305x_gpio_chips,
+       .num_chips = ARRAY_SIZE(rt305x_gpio_chips),
+};
 
 static void rt305x_gpio_reserve(int first, int last)
 {
@@ -80,7 +126,7 @@ void __init rt305x_gpio_init(u32 mode)
 
        rt305x_sysc_wr(mode, SYSC_REG_GPIO_MODE);
 
-       ramips_gpio_init();
+       ramips_gpio_init(&rt305x_gpio_data);
        if ((mode & RT305X_GPIO_MODE_I2C) == 0)
                rt305x_gpio_reserve(RT305X_GPIO_I2C_SD, RT305X_GPIO_I2C_SCLK);
 
This page took 0.0337 seconds and 4 git commands to generate.