automatically mount sd-card as it's possible (might be done via hotplug later)

[openwrt.git] / target / linux / pxa / patches-2.6.21 / 011-proc-gpio.patch

diff --git a/target/linux/pxa/patches-2.6.21/011-proc-gpio.patch b/target/linux/pxa/patches-2.6.21/011-proc-gpio.patch
index 8b4383c..9085a48 100644 (file)
--- a/target/linux/pxa/patches-2.6.21/011-proc-gpio.patch
+++ b/target/linux/pxa/patches-2.6.21/011-proc-gpio.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.21.7/arch/arm/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/Kconfig
-+++ linux-2.6.21.7/arch/arm/Kconfig
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
 @@ -505,6 +505,8 @@ config PCI_HOST_VIA82C505
        depends on PCI && ARCH_SHARK
        default y
@@ -11,38 +9,16 @@ Index: linux-2.6.21.7/arch/arm/Kconfig
  source "drivers/pci/Kconfig"
  
  source "drivers/pcmcia/Kconfig"
-Index: linux-2.6.21.7/drivers/Makefile
-===================================================================
---- linux-2.6.21.7.orig/drivers/Makefile
-+++ linux-2.6.21.7/drivers/Makefile
+--- a/drivers/Makefile
++++ b/drivers/Makefile
 @@ -81,3 +81,4 @@ obj-$(CONFIG_GENERIC_TIME)   += clocksourc
  obj-$(CONFIG_DMA_ENGINE)      += dma/
  obj-$(CONFIG_HID)             += hid/
  obj-$(CONFIG_PPC_PS3)         += ps3/
 +obj-$(CONFIG_PROC_GPIO)               += gpio/
-Index: linux-2.6.21.7/drivers/gpio/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/drivers/gpio/Kconfig
-+++ linux-2.6.21.7/drivers/gpio/Kconfig
-@@ -2,14 +2,27 @@ menuconfig NEW_GPIO
-       bool "GPIO Support"
-       depends on GENERIC_GPIO
-       help
--        Say Y to enable Linux GPIO device support.  This allows control of 
--        GPIO pins using a character device 
-+        Say Y to enable Linux GPIO device support.  This allows control of
-+        GPIO pins using a character device
- 
- if NEW_GPIO
- 
- config GPIO_DEVICE
-       tristate "GPIO device support"
-       help
--        This option enables the gpio character device 
-+        This option enables the gpio character device
- 
- endif # NEW_GPIO
-+
+--- /dev/null
++++ b/drivers/gpio/Kconfig
+@@ -0,0 +1,13 @@
 +config PROC_GPIO
 +      tristate "GPIO /proc interface"
 +      depends on PXA25x || PXA27x
@@ -55,19 +31,14 @@ Index: linux-2.6.21.7/drivers/gpio/Kconfig
 +      depends on PROC_GPIO
 +      help
 +        This enables printk logging of activity done through /proc/gpio
-Index: linux-2.6.21.7/drivers/gpio/Makefile
-===================================================================
---- linux-2.6.21.7.orig/drivers/gpio/Makefile
-+++ linux-2.6.21.7/drivers/gpio/Makefile
-@@ -1 +1,4 @@
- obj-$(CONFIG_GPIO_DEVICE)     += gpio_dev.o
 +
+--- /dev/null
++++ b/drivers/gpio/Makefile
+@@ -0,0 +1,2 @@
 +# Expose GPIOs under /proc
 +obj-$(CONFIG_PROC_GPIO)               += proc_gpio.o
-Index: linux-2.6.21.7/drivers/gpio/proc_gpio.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.21.7/drivers/gpio/proc_gpio.c
++++ b/drivers/gpio/proc_gpio.c
 @@ -0,0 +1,276 @@
 +/*
 + *