[ppc44x] optimize the kernel for size, disable common PCI quirks, and sync kernel...

[openwrt.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index fe39f50..a53209e 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -13,33 +13,73 @@ start() {
                        # WGT634u
                        echo boardtype=wgt634u
                else
                        # WGT634u
                        echo boardtype=wgt634u
                else

-                       strings /dev/mtdblock/3
+                       strings "$(find_mtd_part nvram)"

                fi
        ) | awk '
        function p(cfgname, name) {
                if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
        }
                fi
        ) | awk '
        function p(cfgname, name) {
                if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
        }

-       
+
+       function macinc(mac, maca, i, result) {
+               split(mac, maca, ":")
+               for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
+               if (++maca[6] > 0xff) {
+                       maca[5]++
+                       maca[6] = 0
+               }
+               for (i = 1; i <= 6; i++) {
+                       if (i != 1) result = result ":"
+                       result = result sprintf("%02x", maca[i])
+               }
+               return result
+       }
+

        BEGIN {
                FS="="
                c["lan_ifname"]="eth0.0"
                c["wan_ifname"]="eth0.1"
                c["vlan0ports"]="1 2 3 4 5*"
                c["vlan1ports"]="0 5"
        BEGIN {
                FS="="
                c["lan_ifname"]="eth0.0"
                c["wan_ifname"]="eth0.1"
                c["vlan0ports"]="1 2 3 4 5*"
                c["vlan1ports"]="0 5"

+               getline < "/proc/diag/model"
+               model=$0
+               for (i = 0; i < 6; i++) {
+                       if (mac_check != "") mac_check = mac_check ":"
+                       mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
+               }

        }
        }

-       
-       ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+
+       ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {

                nvram[$1] = $2
        }
                nvram[$1] = $2
        }

-       
+

        END {
        END {

-               # v1 hardware
-               if (nvram["boardtype"] == "bcm94710dev") {
-                       # Asus WL-500g
-                       if (nvram["boardnum"] == "asusX") {
-                               c["lan_ifname"]="eth0 eth1" # FIXME
-                               c["wan_ifname"]=""
-                       }
+               if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
+                       c["wan_ifname"] = ""
+                       c["lan_ifname"] = "eth1"
+               }
+               if (model == "ASUS WL-330gE") {
+                       c["wan_ifname"] = ""
+                       c["lan_ifname"] = "eth0"
+                       c["vlan0ports"] = ""
+                       c["vlan1ports"] = ""
+               }
+               if (model == "ASUS WL-500g") {
+                       c["wan_ifname"] = "eth1"
+                       c["lan_ifname"] = "eth0"
+               }
+               if (model == "ASUS WL-500g Premium V2") {
+                               c["vlan0ports"] = "0 1 2 3 5*"
+                               c["vlan1ports"] = "4 5"
+               }
+               if (model == "Dell TrueMobile 2300") {
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+               }
+               if (model == "Dell TrueMobile 2300 v2") {
+                       c["vlan0ports"] = "0 1 2 3 5*"
+                       c["vlan1ports"] = "4 5"

                }
                if (nvram["boardtype"] == "bcm94710r4") {
                        # Toshiba WRC-1000
                }
                if (nvram["boardtype"] == "bcm94710r4") {
                        # Toshiba WRC-1000


@@ -50,29 +90,79 @@ start() {
                        c["vlan0ports"] = "0 1 2 3 5*"
                        c["vlan1ports"] = "4 5"
                }
                        c["vlan0ports"] = "0 1 2 3 5*"
                        c["vlan1ports"] = "4 5"
                }

-               if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+               if (nvram["boardtype"] == "0x0467") {
+                       c["vlan0ports"] = "0 1 2 3 5*"
+                       c["vlan1ports"] = "4 5"
+               }
+               if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {

                        if (nvram["boardnum"] == "45") {
                        if (nvram["boardnum"] == "45") {

+                               # WL-500gP

                                c["vlan0ports"] = "1 2 3 4 5*"
                                c["vlan1ports"] = "0 5"
                        } else {
                                c["vlan0ports"] = "1 2 3 4 5*"
                                c["vlan1ports"] = "0 5"
                        } else {

-                               c["vlan0ports"] = "0 1 2 3 5*"
-                               c["vlan1ports"] = "4 5"
+                               # Generic BCM94704
+                               c["vlan0ports"] = "0 1 2 3 4 5u"
+                               c["vlan1ports"] = ""
+                               c["lan_ifname"] = "eth0"
+                               c["wan_ifname"] = "eth1"
+
+                               # MAC addresses on 4704 tend to be screwed up. Add a workaround here
+                               if (nvram["et0macaddr"] ~ mac_check) {
+                                       c["lan_macaddr"] = nvram["et0macaddr"]
+                                       c["wan_macaddr"] = macinc(c["lan_macaddr"])
+                               }

                        }
                }
                        }
                }

-       
+               if (nvram["boardtype"] == "0x478") {
+                       # generic broadcom 4785 processor with 5397 switch?
+                       c["vlan0ports"] = "1 2 3 4 8*"
+                       c["vlan1ports"] = "0 8"
+               }
+

                # WAP54G
                if ((nvram["boardnum"] == "2") || \
                        (nvram["boardnum"] == "1024")) {
                        c["lan_ifname"]="eth0"
                        c["wan_ifname"]=""
                }
                # WAP54G
                if ((nvram["boardnum"] == "2") || \
                        (nvram["boardnum"] == "1024")) {
                        c["lan_ifname"]="eth0"
                        c["wan_ifname"]=""
                }

-       
-               print "#### VLAN configuration "
-               print "config switch eth0"
-               p("vlan0", "vlan0ports")
-               p("vlan1", "vlan1ports")
-               print ""
-               print ""
+
+               # Sitecom WL-105b
+               if ((nvram["boardum"] == "2") && \
+                       (nvram["GemtekPmonVer"] == "1")) {
+                       c["lan_ifname"]="eth0"
+                       c["wan_ifname"]=""
+               }
+
+               # ASUS WL-700gE
+               # These are actually same as defaults above. For some reason this script applies
+               # Generic BCM94704 settings instead so we revert to proper settings here.
+               # Hopefully someone will fix this properly soon.
+               if (model == "ASUS WL-700gE") {
+                       c["lan_ifname"]="eth0.0"
+                       c["wan_ifname"]="eth0.1"
+                       c["vlan0ports"]="1 2 3 4 5*"
+                       c["vlan1ports"]="0 5"
+               }
+
+               if (model == "Motorola WR850G V2/V3") {
+                       c["vlan0ports"]="0 1 2 3 5*"
+                       c["vlan1ports"]="4 5"
+               }
+               if (model == "ASUS WL-500W") {
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+               }
+
+               if (c["vlan0ports"] || c["vlan1ports"]) {
+                       print "#### VLAN configuration "
+                       print "config switch eth0"
+                       p("vlan0", "vlan0ports")
+                       p("vlan1", "vlan1ports")
+                       print ""
+                       print ""
+               }

                print "#### Loopback configuration"
                print "config interface loopback"
                print " option ifname   \"lo\""
                print "#### Loopback configuration"
                print "config interface loopback"
                print " option ifname   \"lo\""


@@ -85,14 +175,22 @@ start() {
                print "config interface lan"
                print " option type     bridge"
                p("ifname", "lan_ifname")
                print "config interface lan"
                print " option type     bridge"
                p("ifname", "lan_ifname")

+               p("macaddr", "lan_macaddr")

                print " option proto    static"
                print " option ipaddr   192.168.1.1"
                print " option netmask  255.255.255.0"
                print ""
                print ""
                print " option proto    static"
                print " option ipaddr   192.168.1.1"
                print " option netmask  255.255.255.0"
                print ""
                print ""

-               print "#### WAN configuration"
-               print "config interface wan"
-               p("ifname", "wan_ifname")
-               print " option proto    dhcp"
+               if (c["wan_ifname"]) {
+                       print "#### WAN configuration"
+                       print "config interface wan"
+                       p("ifname", "wan_ifname")
+                       p("macaddr", "wan_macaddr")
+                       print " option proto    dhcp"
+               } else {
+                       print "#### WAN configuration (disabled)"
+                       print "#config interface wan"
+                       print "#        option proto    dhcp"
+               }

        }' > /etc/config/network
 }
        }' > /etc/config/network
 }