IKCONFIG shouldn't be enabled by default

[openwrt.git] / target / linux / brcm-2.4 / Makefile

diff --git a/target/linux/brcm-2.4/Makefile b/target/linux/brcm-2.4/Makefile
index 33d5f1b..d93e0b6 100644 (file)
--- a/target/linux/brcm-2.4/Makefile
+++ b/target/linux/brcm-2.4/Makefile
@@ -1,70 +1,25 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
 include $(TOPDIR)/rules.mk
 
-LINUX_VERSION:=2.4.32
-LINUX_RELEASE:=1
-LINUX_KERNEL_MD5SUM:=38f4d0830e95a20f4bfed17622d5557c
+ARCH:=mipsel
+BOARD:=brcm-2.4
+BOARDNAME:=Broadcom BCM947xx/953xx
+FEATURES:=squashfs
 
-include ../rules.mk
-include ./config
+KERNEL:=2.4
 
-# broadcom specific kmod packages
-$(eval $(call KMOD_template,BRCM_WL,brcm-wl,\
-       $(MODULES_DIR)/kernel/drivers/net/wl/wl.o \
-,CONFIG_WL,,20,wl))
+include $(INCLUDE_DIR)/target.mk
 
-$(eval $(call KMOD_template,BRCM_WL2,brcm-wl2,\
-       $(BUILD_DIR)/wl/wl2/wl.o \
-,CONFIG_WL,,20,wl))
+DEFAULT_PACKAGES += kmod-switch kmod-diag nvram 
 
-$(eval $(call KMOD_template,LP,lp,\
-       $(MODULES_DIR)/kernel/drivers/parport/parport.o \
-       $(MODULES_DIR)/kernel/drivers/parport/parport_splink.o \
-       $(MODULES_DIR)/kernel/drivers/char/lp.o \
-       $(MODULES_DIR)/kernel/drivers/char/ppdev.o \
-,CONFIG_PARPORT,,50,parport parport_splink lp))
+define Target/Description
+       Build firmware images for Broadcom based routers
+       (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
+endef
 
-include ../generic-$(KERNEL)/modules.mk
-include ../kernel.mk
-
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-       [ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
-       [ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
-       @cp config $(LINUX_DIR)/.config
-       touch $@
-
-
-###############################################
-# Proprietary driver for BCM43xx
-###############################################
-
-LINUX_BINARY_DRIVER_SITE=http://openwrt.org/downloads/sources
-# proprietary driver, extracted from Linksys GPL sourcetree WRT54GS 4.70.6
-LINUX_BINARY_WL_DRIVER=kernel-binary-wl-0.5.tar.gz
-LINUX_BINARY_WL_MD5SUM=78e839842bdc04022bb44469f92b1131
-
-$(DL_DIR)/$(LINUX_BINARY_WL_DRIVER):
-       $(SCRIPT_DIR)/download.pl $(DL_DIR) $(LINUX_BINARY_WL_DRIVER) $(LINUX_BINARY_WL_MD5SUM) $(LINUX_BINARY_DRIVER_SITE) $(MAKE_TRACE)
-       
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER)
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.drivers-unpacked
-$(LINUX_DIR)/.modules_done: $(LINUX_DIR)/.drivers-unpacked
-$(STAMP_DIR)/.linux-compile: $(LINUX_DIR)/.drivers-installed
-
-$(LINUX_DIR)/.drivers-unpacked: $(LINUX_DIR)/.unpacked
-       -mkdir -p $(BUILD_DIR)
-       zcat $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-       # copy binary wlan driver
-       mkdir -p $(LINUX_DIR)/drivers/net/wl
-       cp -fpR $(BUILD_DIR)/wl/*.o $(LINUX_DIR)/drivers/net/wl
-       touch $@
-
-$(LINUX_DIR)/.drivers-installed: $(LINUX_DIR)/.modules_done
-       mkdir -p $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.32/kernel/drivers/net/wl
-       @-[ -f $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.32/kernel/drivers/net/wl/wl.o ] || cp $(LINUX_DIR)/drivers/net/wl/wl.o $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.32/kernel/drivers/net/wl/
-       touch $@
-
-linux-dirclean: drivers-clean
-
-drivers-clean:
-       rm -rf $(BUILD_DIR)/wl
+$(eval $(call BuildTarget))