+# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
menu "Shells"
-choice
- prompt "Choose your default shell"
- default BUSYBOX_CONFIG_FEATURE_SH_IS_ASH
- help
- Choose a shell. The ash shell is the most bash compatible
- and full featured one.
-
-config BUSYBOX_CONFIG_FEATURE_SH_IS_ASH
- select BUSYBOX_CONFIG_ASH
- bool "ash"
-
-config BUSYBOX_CONFIG_FEATURE_SH_IS_HUSH
- select BUSYBOX_CONFIG_HUSH
- bool "hush"
-
-####config FEATURE_SH_IS_LASH
-#### select LASH
-#### bool "lash"
-
-config BUSYBOX_CONFIG_FEATURE_SH_IS_MSH
- select BUSYBOX_CONFIG_MSH
- bool "msh"
-
-config BUSYBOX_CONFIG_FEATURE_SH_IS_NONE
- bool "none"
-
-endchoice
-
config BUSYBOX_CONFIG_ASH
bool "ash"
default y
+ depends on !BUSYBOX_CONFIG_NOMMU
help
Tha 'ash' shell adds about 60k in the default configuration and is
the most complete and most pedantically correct shell included with
shell (by Herbert Xu), which was created by porting the 'ash' shell
(written by Kenneth Almquist) from NetBSD.
-comment "Ash Shell Options"
- depends on BUSYBOX_CONFIG_ASH
-
config BUSYBOX_CONFIG_ASH_BASH_COMPAT
bool "bash-compatible extensions"
default y
help
Enable bash-compatible extensions.
-config BUSYBOX_CONFIG_ASH_JOB_CONTROL
- bool "Job control"
- default y
- depends on BUSYBOX_CONFIG_ASH
- help
- Enable job control in the ash shell.
-
-config BUSYBOX_CONFIG_ASH_READ_NCHARS
- bool "'read -n N' and 'read -s' support"
+config BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT
+ bool "Idle timeout variable"
default n
depends on BUSYBOX_CONFIG_ASH
help
- 'read -n N' will return a value after N characters have been read.
- 'read -s' will read without echoing the user's input.
+ Enables bash-like auto-logout after $TMOUT seconds of idle time.
-config BUSYBOX_CONFIG_ASH_READ_TIMEOUT
- bool "'read -t S' support"
+config BUSYBOX_CONFIG_ASH_JOB_CONTROL
+ bool "Job control"
default y
depends on BUSYBOX_CONFIG_ASH
help
- 'read -t S' will return a value after S seconds have passed.
- This implementation will allow fractional seconds, expressed
- as a decimal fraction, e.g. 'read -t 2.5 foo'.
+ Enable job control in the ash shell.
config BUSYBOX_CONFIG_ASH_ALIAS
- bool "alias support"
+ bool "Alias support"
default y
depends on BUSYBOX_CONFIG_ASH
help
Enable alias support in the ash shell.
-config BUSYBOX_CONFIG_ASH_MATH_SUPPORT
- bool "Posix math support"
- default y
- depends on BUSYBOX_CONFIG_ASH
- help
- Enable math support in the ash shell.
-
-config BUSYBOX_CONFIG_ASH_MATH_SUPPORT_64
- bool "Extend Posix math support to 64 bit"
- default y
- depends on BUSYBOX_CONFIG_ASH_MATH_SUPPORT
- help
- Enable 64-bit math support in the ash shell. This will make
- the shell slightly larger, but will allow computation with very
- large numbers.
-
config BUSYBOX_CONFIG_ASH_GETOPTS
bool "Builtin getopt to parse positional parameters"
default y
depends on BUSYBOX_CONFIG_ASH
help
- Enable getopts builtin in the ash shell.
+ Enable support for getopts builtin in ash.
config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO
bool "Builtin version of 'echo'"
default y
depends on BUSYBOX_CONFIG_ASH
help
- Enable support for echo, builtin to ash.
+ Enable support for echo builtin in ash.
config BUSYBOX_CONFIG_ASH_BUILTIN_PRINTF
bool "Builtin version of 'printf'"
default y
depends on BUSYBOX_CONFIG_ASH
help
- Enable support for printf, builtin to ash.
+ Enable support for printf builtin in ash.
config BUSYBOX_CONFIG_ASH_BUILTIN_TEST
bool "Builtin version of 'test'"
default y
depends on BUSYBOX_CONFIG_ASH
help
- Enable support for test, builtin to ash.
+ Enable support for test builtin in ash.
config BUSYBOX_CONFIG_ASH_CMDCMD
bool "'command' command to override shell builtins"
default n
depends on BUSYBOX_CONFIG_ASH
help
- Enable "check for new mail" in the ash shell.
+ Enable "check for new mail" function in the ash shell.
config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE
bool "Optimize for size instead of speed"
Compile ash for reduced size at the price of speed.
config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT
- bool "Pseudorandom generator and variable $RANDOM"
+ bool "Pseudorandom generator and $RANDOM variable"
default n
depends on BUSYBOX_CONFIG_ASH
help
Enable pseudorandom generator and dynamic variable "$RANDOM".
Each read of "$RANDOM" will generate a new pseudorandom value.
You can reset the generator by using a specified start value.
- After "unset RANDOM" then generator will switch off and this
+ After "unset RANDOM" the generator will switch off and this
variable will no longer have special treatment.
config BUSYBOX_CONFIG_ASH_EXPAND_PRMT
default y
depends on BUSYBOX_CONFIG_ASH
help
- "PS#" may be contain volatile content, such as backquote commands.
+ "PS#" may contain volatile content, such as backquote commands.
This option recreates the prompt string from the environment
variable each time it is displayed.
+config BUSYBOX_CONFIG_CTTYHACK
+ bool "cttyhack"
+ default n
+ help
+ One common problem reported on the mailing list is the "can't
+ access tty; job control turned off" error message, which typically
+ appears when one tries to use a shell with stdin/stdout on
+ /dev/console.
+ This device is special - it cannot be a controlling tty.
+
+ The proper solution is to use the correct device instead of
+ /dev/console.
+
+ cttyhack provides a "quick and dirty" solution to this problem.
+ It analyzes stdin with various ioctls, trying to determine whether
+ it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line).
+ On Linux it also checks sysfs for a pointer to the active console.
+ If cttyhack is able to find the real console device, it closes
+ stdin/out/err and reopens that device.
+ Then it executes the given program. Opening the device will make
+ that device a controlling tty. This may require cttyhack
+ to be a session leader.
+
+ Example for /etc/inittab (for busybox init):
+
+ ::respawn:/bin/cttyhack /bin/sh
+
+ Starting an interactive shell from boot shell script:
+
+ setsid cttyhack sh
+
+ Giving controlling tty to shell running with PID 1:
+
+ # exec cttyhack sh
+
+ Without cttyhack, you need to know exact tty name,
+ and do something like this:
+
+ # exec setsid sh -c 'exec sh </dev/tty1 >/dev/tty1 2>&1'
+
config BUSYBOX_CONFIG_HUSH
bool "hush"
default n
help
- hush is a very small shell (just 18k) and it has fairly complete
- Bourne shell grammar. It even handles all the normal flow control
- options such as if/then/elif/else/fi, for/in/do/done, while loops,
- case/esac.
+ hush is a small shell (25k). It handles the normal flow control
+ constructs such as if/then/elif/else/fi, for/in/do/done, while loops,
+ case/esac. Redirections, here documents, $((arithmetic))
+ and functions are supported.
- It uses only vfork, so it can be used on uClinux systems.
+ It will compile and work on no-mmu systems.
- It does not handle select, functions, here documents ( <<
- word ), arithmetic expansion, aliases, brace expansion, tilde
- expansion, &> and >& redirection of stdout+stderr, etc.
+ It does not handle select, aliases, tilde expansion,
+ &>file and >&file redirection of stdout+stderr.
+
+config BUSYBOX_CONFIG_HUSH_BASH_COMPAT
+ bool "bash-compatible extensions"
+ default y
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ Enable bash-compatible extensions.
+
+config BUSYBOX_CONFIG_HUSH_BRACE_EXPANSION
+ bool "Brace expansion"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH_BASH_COMPAT
+ help
+ Enable {abc,def} extension.
config BUSYBOX_CONFIG_HUSH_HELP
bool "help builtin"
- default n
+ default y
depends on BUSYBOX_CONFIG_HUSH
help
Enable help builtin in hush. Code size + ~1 kbyte.
config BUSYBOX_CONFIG_HUSH_INTERACTIVE
bool "Interactive mode"
- default n
+ default y
depends on BUSYBOX_CONFIG_HUSH
help
Enable interactive mode (prompt and command editing).
Without this, hush simply reads and executes commands
- from stdin just like a shell script from the file.
+ from stdin just like a shell script from a file.
No prompt, no PS1/PS2 magic shell variables.
+config BUSYBOX_CONFIG_HUSH_SAVEHISTORY
+ bool "Save command history to .hush_history"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH_INTERACTIVE && BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
+ help
+ Enable history saving in hush.
+
config BUSYBOX_CONFIG_HUSH_JOB
bool "Job control"
- default n
+ default y
depends on BUSYBOX_CONFIG_HUSH_INTERACTIVE
help
Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current
config BUSYBOX_CONFIG_HUSH_TICK
bool "Process substitution"
- default n
+ default y
depends on BUSYBOX_CONFIG_HUSH
help
Enable process substitution `command` and $(command) in hush.
config BUSYBOX_CONFIG_HUSH_IF
bool "Support if/then/elif/else/fi"
- default n
+ default y
depends on BUSYBOX_CONFIG_HUSH
help
Enable if/then/elif/else/fi in hush.
config BUSYBOX_CONFIG_HUSH_LOOPS
bool "Support for, while and until loops"
- default n
+ default y
depends on BUSYBOX_CONFIG_HUSH
help
Enable for, while and until loops in hush.
- As of 2008-07, break and continue statements are not supported.
config BUSYBOX_CONFIG_HUSH_CASE
bool "Support case ... esac statement"
- default n
+ default y
depends on BUSYBOX_CONFIG_HUSH
help
Enable case ... esac statement in hush. +400 bytes.
-config BUSYBOX_CONFIG_LASH
- bool "lash"
+config BUSYBOX_CONFIG_HUSH_FUNCTIONS
+ bool "Support funcname() { commands; } syntax"
+ default y
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ Enable support for shell functions in hush. +800 bytes.
+
+config BUSYBOX_CONFIG_HUSH_LOCAL
+ bool "Support local builtin"
+ default y
+ depends on BUSYBOX_CONFIG_HUSH_FUNCTIONS
+ help
+ Enable support for local variables in functions.
+
+config BUSYBOX_CONFIG_HUSH_RANDOM_SUPPORT
+ bool "Pseudorandom generator and $RANDOM variable"
default n
- select BUSYBOX_CONFIG_HUSH
+ depends on BUSYBOX_CONFIG_HUSH
help
- lash is deprecated and will be removed, please migrate to hush.
+ Enable pseudorandom generator and dynamic variable "$RANDOM".
+ Each read of "$RANDOM" will generate a new pseudorandom value.
+
+config BUSYBOX_CONFIG_HUSH_EXPORT_N
+ bool "Support 'export -n' option"
+ default y
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ export -n unexports variables. It is a bash extension.
+
+config BUSYBOX_CONFIG_HUSH_MODE_X
+ bool "Support 'hush -x' option and 'set -x' command"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ This instructs hush to print commands before execution.
+ Adds ~300 bytes.
config BUSYBOX_CONFIG_MSH
- bool "msh"
+ bool "msh (deprecated: aliased to hush)"
default n
+ select BUSYBOX_CONFIG_HUSH
+ help
+ msh is deprecated and will be removed, please migrate to hush.
+
+
+choice
+ prompt "Choose which shell is aliased to 'sh' name"
+ default BUSYBOX_CONFIG_FEATURE_SH_IS_ASH
+ help
+ Choose which shell you want to be executed by 'sh' alias.
+ The ash shell is the most bash compatible and full featured one.
+
+# note: cannot use "select ASH" here, it breaks "make allnoconfig"
+config BUSYBOX_CONFIG_FEATURE_SH_IS_ASH
+ depends on BUSYBOX_CONFIG_ASH
+ bool "ash"
+ depends on !BUSYBOX_CONFIG_NOMMU
+
+config BUSYBOX_CONFIG_FEATURE_SH_IS_HUSH
+ depends on BUSYBOX_CONFIG_HUSH
+ bool "hush"
+
+config BUSYBOX_CONFIG_FEATURE_SH_IS_NONE
+ bool "none"
+
+endchoice
+
+choice
+ prompt "Choose which shell is aliased to 'bash' name"
+ default BUSYBOX_CONFIG_FEATURE_BASH_IS_NONE
help
- The minix shell (adds just 30k) is quite complete and handles things
- like for/do/done, case/esac and all the things you expect a Bourne
- shell to do. It is not always pedantically correct about Bourne
- shell grammar (try running the shell testscript "tests/sh.testcases"
- on it and compare vs bash) but for most things it works quite well.
- It uses only vfork, so it can be used on uClinux systems.
+ Choose which shell you want to be executed by 'bash' alias.
+ The ash shell is the most bash compatible and full featured one.
+
+ Note that selecting this option does not switch on any bash
+ compatibility code. It merely makes it possible to install
+ /bin/bash (sym)link and run scripts which start with
+ #!/bin/bash line.
+
+ Many systems use it in scripts which use bash-specific features,
+ even simple ones like $RANDOM. Without this option, busybox
+ can't be used for running them because it won't recongnize
+ "bash" as a supported applet name.
-comment "Bourne Shell Options"
- depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
+config BUSYBOX_CONFIG_FEATURE_BASH_IS_ASH
+ depends on BUSYBOX_CONFIG_ASH
+ bool "ash"
+ depends on !BUSYBOX_CONFIG_NOMMU
+
+config BUSYBOX_CONFIG_FEATURE_BASH_IS_HUSH
+ depends on BUSYBOX_CONFIG_HUSH
+ bool "hush"
+
+config BUSYBOX_CONFIG_FEATURE_BASH_IS_NONE
+ bool "none"
+
+endchoice
+
+
+config BUSYBOX_CONFIG_SH_MATH_SUPPORT
+ bool "POSIX math support"
+ default y
+ depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH
+ help
+ Enable math support in the shell via $((...)) syntax.
+
+config BUSYBOX_CONFIG_SH_MATH_SUPPORT_64
+ bool "Extend POSIX math support to 64 bit"
+ default y
+ depends on BUSYBOX_CONFIG_SH_MATH_SUPPORT
+ help
+ Enable 64-bit math support in the shell. This will make the shell
+ slightly larger, but will allow computation with very large numbers.
+ This is not in POSIX, so do not rely on this in portable code.
config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET
bool "Hide message on interactive shell startup"
default n
- depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
+ depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
help
Remove the busybox introduction when starting a shell.
config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
bool "Standalone shell"
default n
- depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
+ depends on (BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
help
This option causes busybox shells to use busybox applets
in preference to executables in the PATH whenever possible. For
config BUSYBOX_CONFIG_FEATURE_SH_NOFORK
bool "Run 'nofork' applets directly"
default n
- depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
+ depends on (BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
help
- This option causes busybox shells [currently only ash]
- to not execute typical fork/exec/wait sequence, but call <applet>_main
- directly, if possible. (Sometimes it is not possible: for example,
+ This option causes busybox shells to not execute typical
+ fork/exec/wait sequence, but call <applet>_main directly,
+ if possible. (Sometimes it is not possible: for example,
this is not possible in pipes).
This will be done only for some applets (those which are marked
This may significantly speed up some shell scripts.
- This feature is relatively new. Use with care.
+ This feature is relatively new. Use with care. Report bugs
+ to project mailing list.
-config BUSYBOX_CONFIG_CTTYHACK
- bool "cttyhack"
+config BUSYBOX_CONFIG_FEATURE_SH_HISTFILESIZE
+ bool "Use $HISTFILESIZE"
default n
+ depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
help
- One common problem reported on the mailing list is "can't access tty;
- job control turned off" error message which typically appears when
- one tries to use shell with stdin/stdout opened to /dev/console.
- This device is special - it cannot be a controlling tty.
-
- Proper solution is to use correct device instead of /dev/console.
+ This option makes busybox shells to use $HISTFILESIZE variable
+ to set shell history size. Note that its max value is capped
+ by "History size" setting in library tuning section.
- cttyhack provides "quick and dirty" solution to this problem.
- It analyzes stdin with various ioctls, trying to determine whether
- it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line).
- If it detects one, it closes stdin/out/err and reopens that device.
- Then it executes given program. Usage example for /etc/inittab
- (for busybox init):
-
- ::respawn:/bin/cttyhack /bin/sh
endmenu
projects / openwrt.git / blobdiff