menu "Miscellaneous Utilities"
+config BUSYBOX_CONFIG_CONSPY
+ bool "conspy"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ A text-mode VNC like program for Linux virtual terminals.
+ example: conspy NUM shared access to console num
+ or conspy -nd NUM screenshot of console num
+ or conspy -cs NUM poor man's GNU screen like
+config BUSYBOX_CONFIG_NANDWRITE
+ bool "nandwrite"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Write to the specified MTD device, with bad blocks awareness
+
+config BUSYBOX_CONFIG_NANDDUMP
+ bool "nanddump"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Dump the content of raw NAND chip
+config BUSYBOX_CONFIG_UBIATTACH
+ bool "ubiattach"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Attach MTD device to an UBI device.
+
+config BUSYBOX_CONFIG_UBIDETACH
+ bool "ubidetach"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Detach MTD device from an UBI device.
+
config BUSYBOX_CONFIG_ADJTIMEX
bool "adjtimex"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Adjtimex reads and optionally sets adjustment parameters for
the Linux clock adjustment algorithm.
The bbconfig applet will print the config file with which
busybox was built.
+config BUSYBOX_CONFIG_FEATURE_COMPRESS_BBCONFIG
+ bool "Compress bbconfig data"
+ default n
+ depends on BUSYBOX_CONFIG_BBCONFIG
+ help
+ Store bbconfig data in compressed form, uncompress them on-the-fly
+ before output.
+
+ If you have a really tiny busybox with few applets enabled (and
+ bunzip2 isn't one of them), the overhead of the decompressor might
+ be noticeable. Also, if you run executables directly from ROM
+ and have very little memory, this might not be a win. Otherwise,
+ you probably want this.
+
+config BUSYBOX_CONFIG_BEEP
+ bool "beep"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The beep applets beeps in a given freq/Hz.
+
+config BUSYBOX_CONFIG_FEATURE_BEEP_FREQ
+ int "default frequency"
+ range 0 2147483647
+ default 4000
+ depends on BUSYBOX_CONFIG_BEEP
+ help
+ Frequency for default beep.
+
+config BUSYBOX_CONFIG_FEATURE_BEEP_LENGTH_MS
+ int "default length"
+ range 0 2147483647
+ default 30
+ depends on BUSYBOX_CONFIG_BEEP
+ help
+ Length in ms for default beep.
+
config BUSYBOX_CONFIG_CHAT
bool "chat"
default n
config BUSYBOX_CONFIG_CROND
bool "crond"
default y
- select BUSYBOX_CONFIG_FEATURE_SUID
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Crond is a background daemon that parses individual crontab
# Run daily cron jobs at 4:40 every day:
40 4 * * * /etc/cron/daily > /dev/null 2>&1
-config BUSYBOX_CONFIG_DEBUG_CROND_OPTION
+config BUSYBOX_CONFIG_FEATURE_CROND_D
bool "Support option -d to redirect output to stderr"
depends on BUSYBOX_CONFIG_CROND
default n
-d sets loglevel to 0 (most verbose) and directs all output to stderr.
config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL
- bool "Using /usr/sbin/sendmail?"
+ bool "Report command output via email (using sendmail)"
default n
depends on BUSYBOX_CONFIG_CROND
help
- Support calling /usr/sbin/sendmail for send cmd outputs.
+ Command output will be sent to corresponding user via email.
+
+config BUSYBOX_CONFIG_FEATURE_CROND_DIR
+ string "crond spool directory"
+ default "/var/spool/cron"
+ depends on BUSYBOX_CONFIG_CROND || BUSYBOX_CONFIG_CRONTAB
+ help
+ Location of crond spool.
config BUSYBOX_CONFIG_CRONTAB
bool "crontab"
default y
- select BUSYBOX_CONFIG_FEATURE_SUID
help
Crontab manipulates the crontab for a particular user. Only
the superuser may specify a different user and/or crontab directory.
Dc is a reverse-polish desk calculator which supports unlimited
precision arithmetic.
+config BUSYBOX_CONFIG_FEATURE_DC_LIBM
+ bool "Enable power and exp functions (requires libm)"
+ default n
+ depends on BUSYBOX_CONFIG_DC
+ help
+ Enable power and exp functions.
+ NOTE: This will require libm to be present for linking.
+
config BUSYBOX_CONFIG_DEVFSD
bool "devfsd (obsolete)"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- This is deprecated, and will be removed at the end of 2008.
+ This is deprecated and should NOT be used anymore.
+ Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+ See docs/mdev.txt for detailed instructions on how to use mdev
+ instead.
Provides compatibility with old device names on a devfs systems.
You should set it to true if you have devfs enabled.
"PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
"MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
- But only if they are written UPPERCASE!!!!!!!!
+ But only if they are written UPPERCASE!!!!!!!!
config BUSYBOX_CONFIG_DEVFSD_MODLOAD
bool "Adds support for MODLOAD keyword in devsfd.conf"
config BUSYBOX_CONFIG_FEATURE_DEVFS
bool "Use devfs names for all devices (obsolete)"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This is obsolete and will be going away at the end of 2008..
+ This is obsolete and should NOT be used anymore.
+ Use linux >= 2.6 (optionally with hotplug) and mdev instead!
- This tells busybox to look for names like /dev/loop/0 instead of
+ For legacy systems -- if there is no way around devfsd -- this
+ tells busybox to look for names like /dev/loop/0 instead of
/dev/loop0. If your /dev directory has normal names instead of
devfs names, you don't want this.
+config BUSYBOX_CONFIG_DEVMEM
+ bool "devmem"
+ default n
+ help
+ devmem is a small program that reads and writes from physical
+ memory using /dev/mem.
+
config BUSYBOX_CONFIG_EJECT
bool "eject"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Used to eject cdroms. (defaults to /dev/cdrom)
config BUSYBOX_CONFIG_FBSPLASH
bool "fbsplash"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Shows splash image and progress bar on framebuffer device.
Can be used during boot phase of an embedded device. ~2kb.
"NN" (ASCII decimal number) - percentage to show on progress bar
"exit" - well you guessed it
+config BUSYBOX_CONFIG_FLASHCP
+ bool "flashcp"
+ default n
+ help
+ The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
+ This utility is used to copy images into a MTD device.
+
+config BUSYBOX_CONFIG_FLASH_LOCK
+ bool "flash_lock"
+ default n
+ help
+ The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
+ utility locks part or all of the flash device.
+
+config BUSYBOX_CONFIG_FLASH_UNLOCK
+ bool "flash_unlock"
+ default n
+ help
+ The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
+ utility unlocks part or all of the flash device.
+
+config BUSYBOX_CONFIG_FLASH_ERASEALL
+ bool "flash_eraseall"
+ default n
+ help
+ The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
+ This utility is used to erase the whole MTD device.
+
+config BUSYBOX_CONFIG_IONICE
+ bool "ionice"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Set/set program io scheduling class and priority
+ Requires kernel >= 2.6.13
+
config BUSYBOX_CONFIG_INOTIFYD
bool "inotifyd"
default n
config BUSYBOX_CONFIG_LAST
bool "last"
default n
- select BUSYBOX_CONFIG_FEATURE_WTMP
+ depends on BUSYBOX_CONFIG_FEATURE_WTMP
help
'last' displays a list of the last users that logged into the system.
choice
prompt "Choose last implementation"
depends on BUSYBOX_CONFIG_LAST
- default BUSYBOX_CONFIG_FEATURE_LAST_SMALL
+ default BUSYBOX_CONFIG_FEATURE_LAST_FANCY
config BUSYBOX_CONFIG_FEATURE_LAST_SMALL
bool "small"
The -M flag enables a more sophisticated status line.
The -m flag enables a simpler status line with a percentage.
-config BUSYBOX_CONFIG_FEATURE_LESS_FLAGCS
- bool "Enable flag changes"
- default n
- depends on BUSYBOX_CONFIG_LESS
- help
- This enables the ability to change command-line flags within
- less itself.
-
config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
bool "Enable marks"
default n
help
Enable regular expressions, allowing complex file searches.
+config BUSYBOX_CONFIG_FEATURE_LESS_WINCH
+ bool "Enable automatic resizing on window size changes"
+ default n
+ depends on BUSYBOX_CONFIG_LESS
+ help
+ Makes less track window size changes.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
+ bool "Enable flag changes ('-' command)"
+ default n
+ depends on BUSYBOX_CONFIG_LESS
+ help
+ This enables the ability to change command-line flags within
+ less itself ('-' keyboard command).
+
+config BUSYBOX_CONFIG_FEATURE_LESS_LINENUMS
+ bool "Enable dynamic switching of line numbers"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
+ help
+ Enables "-N" command.
+
config BUSYBOX_CONFIG_HDPARM
bool "hdparm"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Get/Set hard drive parameters. Primarily intended for ATA
drives. Adds about 13k (or around 30k if you enable the
stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
- bool "Get/set using_dma flag (DANGEROUS)"
+ bool "Get/set using_dma flag"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
Enables the 'hdparm -d' option to get/set using_dma flag.
- This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_LOCK
bool "lock"
help
'makedevs' is a utility used to create a batch of devices with
one command.
- .
+
There are two choices for command line behaviour, the interface
as used by LEAF/Linux Router Project, or a device table file.
- .
+
'leaf' is traditionally what busybox follows, it allows multiple
devices of a particluar type to be created per command.
e.g. /dev/hda[0-9]
Device properties are passed as command line arguments.
- .
+
'table' reads device properties from a file or stdin, allowing
a batch of unrelated devices to be made with one command.
User/group names are allowed as an alternative to uid/gid.
config BUSYBOX_CONFIG_RAIDAUTORUN
bool "raidautorun"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
raidautorun tells the kernel md driver to
search and start RAID arrays.
config BUSYBOX_CONFIG_READAHEAD
bool "readahead"
default n
- depends on BUSYBOX_CONFIG_LFS
+ depends on BUSYBOX_CONFIG_LFS && BUSYBOX_CONFIG_PLATFORM_LINUX
help
Preload the files listed on the command line into RAM cache so that
subsequent reads on these files will not block on disk I/O.
As readahead(2) blocks until each file has been read, it is best to
run this applet as a background job.
+config BUSYBOX_CONFIG_RFKILL
+ bool "rfkill"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Enable/disable wireless devices.
+
+ rfkill list : list all wireless devices
+ rfkill list bluetooth : list all bluetooth devices
+ rfkill list 1 : list device corresponding to the given index
+ rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
+
config BUSYBOX_CONFIG_RUNLEVEL
bool "runlevel"
default n
config BUSYBOX_CONFIG_RX
bool "rx"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Receive files using the Xmodem protocol.
When the command finishes, time writes a message to standard output
giving timing statistics about this program run.
+config BUSYBOX_CONFIG_TIMEOUT
+ bool "timeout"
+ default n
+ help
+ Runs a program and watches it. If it does not terminate in
+ specified number of seconds, it is sent a signal.
+
config BUSYBOX_CONFIG_TTYSIZE
bool "ttysize"
default n
error, but returns default 80x24.
Usage in shell scripts: width=`ttysize w`.
+config BUSYBOX_CONFIG_VOLNAME
+ bool "volname"
+ default n
+ help
+ Prints a CD-ROM volume name.
+
+config BUSYBOX_CONFIG_WALL
+ bool "wall"
+ default n
+ help
+ Write a message to all users that are logged in.
+
config BUSYBOX_CONFIG_WATCHDOG
bool "watchdog"
default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
The watchdog utility is used with hardware or software watchdog
device drivers. It opens the specified watchdog device special file
projects / openwrt.git / blobdiff