generic: rtl8366: add rtl8366_smi_write_reg_noack helper

[openwrt.git] / package / busybox / config / libbb / Config.in

diff --git a/package/busybox/config/libbb/Config.in b/package/busybox/config/libbb/Config.in
index e456dd8..6475403 100644 (file)
--- a/package/busybox/config/libbb/Config.in
+++ b/package/busybox/config/libbb/Config.in
@@ -1,3 +1,4 @@
+# DO NOT EDIT. This file is generated from Config.src

 #
 # For a description of the syntax of this configuration file,
 # see scripts/kbuild/config-language.txt.
 #
 # For a description of the syntax of this configuration file,
 # see scripts/kbuild/config-language.txt.


@@ -5,6 +6,21 @@
 
 menu "Busybox Library Tuning"
 
 
 menu "Busybox Library Tuning"
 

+config BUSYBOX_CONFIG_FEATURE_SYSTEMD
+       bool "Enable systemd support"
+       default n
+       help
+         If you plan to use busybox daemons on a system where daemons
+         are controlled by systemd, enable this option.
+         If you don't use systemd, it is still safe to enable it,
+         but the downside is increased code size.
+config BUSYBOX_CONFIG_FEATURE_RTMINMAX
+       bool "Support RTMIN[+n] and RTMAX[-n] signal names"
+       default n
+       help
+         Support RTMIN[+n] and RTMAX[-n] signal names
+         in kill, killall etc. This costs ~250 bytes.
+

 config BUSYBOX_CONFIG_PASSWORD_MINLEN
        int "Minimum password length"
        default 6
 config BUSYBOX_CONFIG_PASSWORD_MINLEN
        int "Minimum password length"
        default 6


@@ -13,7 +29,7 @@ config BUSYBOX_CONFIG_PASSWORD_MINLEN
          Minimum allowable password length.
 
 config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
          Minimum allowable password length.
 
 config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED

-       int "MD5: Trade Bytes for Speed"
+       int "MD5: Trade bytes for speed (0:fast, 3:slow)"

        default 2
        range 0 3
        help
        default 2
        range 0 3
        help


@@ -41,6 +57,17 @@ config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
          a rarely used feature which allows you to use names
          instead of IP/mask pairs in route command.
 
          a rarely used feature which allows you to use names
          instead of IP/mask pairs in route command.
 

+config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
+       bool "Use termios to manipulate the screen"
+       default n
+       depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP
+       help
+         This option allows utilities such as 'more' and 'top' to determine
+         the size of the screen. If you leave this disabled, your utilities
+         that display things on the screen will be especially primitive and
+         will be unable to determine the current screen size, and will be
+         unable to move the cursor.
+

 config BUSYBOX_CONFIG_FEATURE_EDITING
        bool "Command line editing"
        default y
 config BUSYBOX_CONFIG_FEATURE_EDITING
        bool "Command line editing"
        default y


@@ -67,18 +94,27 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_VI
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
        int "History size"
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
        int "History size"

-       range 0 99999
+       # Don't allow way too big values here, code uses fixed "char *history[N]" struct member
+       range 0 9999

        default 256
        depends on BUSYBOX_CONFIG_FEATURE_EDITING
        help
        default 256
        depends on BUSYBOX_CONFIG_FEATURE_EDITING
        help

-         Specify command history size.
+         Specify command history size (0 - disable).

 
 config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
        bool "History saving"
        default n
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
        bool "History saving"
        default n

-       depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_EDITING
+       depends on BUSYBOX_CONFIG_FEATURE_EDITING
+       help
+         Enable history saving in shells.
+
+config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
+       bool "Reverse history search"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY

        help
        help

-         Enable history saving in ash shell.
+         Enable readline-like Ctrl-R combination for reverse history search.
+         Increases code by about 0.5k.

 
 config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
        bool "Tab completion"
 
 config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
        bool "Tab completion"


@@ -102,6 +138,28 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT
          Setting this option allows for prompts to use things like \w and
          \$ and escape codes.
 
          Setting this option allows for prompts to use things like \w and
          \$ and escape codes.
 

+config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
+       bool "Query cursor position from terminal"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_EDITING
+       help
+         Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
+         current cursor position. This information is used to make line
+         editing more robust in some cases.
+         If you are not sure whether your terminals respond to this code
+         correctly, or want to save on code size (about 400 bytes),
+         then do not turn this option on.
+
+config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
+       bool "Non-POSIX, but safer, copying to special nodes"
+       default y
+       help
+         With this option, "cp file symlink" will delete symlink
+         and create a regular file. This does not conform to POSIX,
+         but prevents a symlink attack.
+         Similarly, "cp file device" will not send file's data
+         to the device. (To do that, use "cat file >device")
+

 config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
        bool "Give more precise messages when copy fails (cp, mv etc)"
        default n
 config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
        bool "Give more precise messages when copy fails (cp, mv etc)"
        default n


@@ -112,9 +170,8 @@ config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
            $ cp file /vmlinuz/file
            cp: cannot stat '/vmlinuz/file': Path has non-directory component
          If this feature is not enabled, they will be, respectively:
            $ cp file /vmlinuz/file
            cp: cannot stat '/vmlinuz/file': Path has non-directory component
          If this feature is not enabled, they will be, respectively:

-           cp: cannot remove '/does_not_exist/file': No such file or directory
+           cp: cannot create '/does_not_exist/file': No such file or directory

            cp: cannot stat '/vmlinuz/file': Not a directory
            cp: cannot stat '/vmlinuz/file': Not a directory

-         respectively.

          This will cost you ~60 bytes.
 
 config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
          This will cost you ~60 bytes.
 
 config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB


@@ -122,14 +179,34 @@ config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
        range 1 1024
        default 4
        help
        range 1 1024
        default 4
        help

-         Size of buffer used by cp, mv, install etc.
+         Size of buffer used by cp, mv, install, wget etc.

          Buffers which are 4 kb or less will be allocated on stack.
          Bigger buffers will be allocated with mmap, with fallback to 4 kb
          stack buffer if mmap fails.
 
          Buffers which are 4 kb or less will be allocated on stack.
          Bigger buffers will be allocated with mmap, with fallback to 4 kb
          stack buffer if mmap fails.
 

+config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
+       bool "Skip rootfs in mount table"
+       default n
+       help
+         Ignore rootfs entry in mount table.
+
+         In Linux, kernel has a special filesystem, rootfs, which is initially
+         mounted on /. It contains initramfs data, if kernel is configured
+         to have one. Usually, another file system is mounted over / early
+         in boot process, and therefore most tools which manipulate
+         mount table, such as df, will skip rootfs entry.
+
+         However, some systems do not mount anything on /.
+         If you need to configure busybox for one of these systems,
+         you may find useful to turn this option off to make df show
+         initramfs statistic.
+
+         Otherwise, choose Y.
+

 config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
        bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
        default n
 config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
        bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
        default n

+       select BUSYBOX_CONFIG_PLATFORM_LINUX

        help
          Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
          time intervals (time, ping, traceroute etc need this).
        help
          Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
          time intervals (time, ping, traceroute etc need this).


@@ -151,4 +228,5 @@ config BUSYBOX_CONFIG_FEATURE_HWIB
        help
          Support for printing infiniband addresses in
          network applets.
        help
          Support for printing infiniband addresses in
          network applets.

+

 endmenu
 endmenu