local ifname="$2"
cfgfile="/var/run/hostapd-$phy.conf"
+ macfile="/var/run/hostapd-$phy.maclist"
+ [ -e "$macfile" ] && rm -f "$macfile"
+
config_get device "$vif" device
config_get country "$device" country
config_get hwmode "$device" hwmode
config_get channel "$device" channel
+ config_get beacon_int "$device" beacon_int
+ config_get basic_rate_list "$device" basic_rate
+ config_get_bool noscan "$device" noscan
[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
[ "$channel" = auto ] && channel=
[ -n "$hwmode" ] && {
[ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
}
}
- cat > "$cfgfile" <<EOF
+
+ local country_ie=0
+ [ -n "$country" ] && country_ie=1
+ config_get_bool country_ie "$device" country_ie "$country_ie"
+ [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
+
+ config_get macfilter "$vif" macfilter
+ case "$macfilter" in
+ allow)
+ append base_cfg "macaddr_acl=1" "$N"
+ append base_cfg "accept_mac_file=$macfile" "$N"
+ ;;
+ deny)
+ append base_cfg "macaddr_acl=0" "$N"
+ append base_cfg "deny_mac_file=$macfile" "$N"
+ ;;
+ esac
+ config_get maclist "$vif" maclist
+ [ -n "$maclist" ] && {
+ for mac in $maclist; do
+ echo "$mac" >> $macfile
+ done
+ }
+
+ local br brval brstr
+ [ -n "$basic_rate_list" ] && {
+ for br in $basic_rate_list; do
+ brval="$(($br / 100))"
+ [ -n "$brstr" ] && brstr="$brstr "
+ brstr="$brstr$brval"
+ done
+ }
+
+ cat >> "$cfgfile" <<EOF
ctrl_interface=/var/run/hostapd-$phy
driver=nl80211
wmm_ac_bk_cwmin=4
tx_queue_data0_burst=1.5
${hwmode:+hw_mode=$hwmode}
${channel:+channel=$channel}
+${beacon_int:+beacon_int=$beacon_int}
${country:+country_code=$country}
+${noscan:+noscan=$noscan}
+${brstr:+basic_rates=$brstr}
$base_cfg
EOF
config_get_bool wds "$vif" wds 0
[ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
+ local macaddr hidden maxassoc wmm
config_get macaddr "$vif" macaddr
+ config_get maxassoc "$vif" maxassoc
+ config_get dtim_period "$vif" dtim_period
+ config_get max_listen_int "$vif" max_listen_int
config_get_bool hidden "$vif" hidden 0
+ config_get_bool wmm "$vif" wmm 1
cat >> /var/run/hostapd-$phy.conf <<EOF
$hostapd_cfg
-wmm_enabled=1
+wmm_enabled=$wmm
bssid=$macaddr
ignore_broadcast_ssid=$hidden
+${dtim_period:+dtim_period=$dtim_period}
+${max_listen_int:+max_listen_interval=$max_listen_int}
+${maxassoc:+max_num_sta=$maxassoc}
EOF
}
config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${monitor:+$monitor }${mesh:+$mesh}"
}
+list_phy_interfaces() {
+ local phy="$1"
+ if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
+ ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
+ else
+ ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
+ fi
+}
disable_mac80211() (
local device="$1"
set_wifi_down "$device"
# kill all running hostapd and wpa_supplicant processes that
# are running on atheros/mac80211 vifs
- for pid in `pidof hostapd wpa_supplicant`; do
- grep "$phy" /proc/$pid/cmdline >/dev/null && \
+ for pid in `pidof hostapd`; do
+ grep -E "$phy" /proc/$pid/cmdline >/dev/null && \
kill $pid
done
include /lib/network
- for wdev in $(ls /sys/class/ieee80211/${phy}/device/net 2>/dev/null); do
+ for wdev in $(list_phy_interfaces "$phy"); do
+ [ -f "/var/run/$wdev.pid" ] && kill $(cat /var/run/$wdev.pid) >&/dev/null 2>&1
+ for pid in `pidof wpa_supplicant`; do
+ grep "$wdev" /proc/$pid/cmdline >/dev/null && \
+ kill $pid
+ done
ifconfig "$wdev" down 2>/dev/null
unbridge "$dev"
iw dev "$wdev" del
config_get txpower "$device" txpower
config_get country "$device" country
config_get distance "$device" distance
+ config_get txantenna "$device" txantenna all
+ config_get rxantenna "$device" rxantenna all
+ config_get frag "$device" frag
+ config_get rts "$device" rts
find_mac80211_phy "$device" || return 0
config_get phy "$device" phy
local i=0
local macidx=0
local apidx=0
fixed=""
+ local hostapd_ctrl=""
[ -n "$country" ] && iw reg set "$country"
[ "$channel" = "auto" -o "$channel" = "0" ] || {
fixed=1
}
+ iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
+
[ -n "$distance" ] && iw phy "$phy" set distance "$distance"
+ [ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
+ [ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"
export channel fixed
# convert channel to frequency
}
config_set "$vif" ifname "$ifname"
- config_get enc "$vif" encryption
config_get mode "$vif" mode
config_get ssid "$vif" ssid
# Hostapd will handle recreating the interface and
# it's accompanying monitor
apidx="$(($apidx + 1))"
+ i=$(($i + 1))
[ "$apidx" -gt 1 ] || iw phy "$phy" interface add "$ifname" type managed
;;
mesh)
[ "$mode" = "ap" ] || ifconfig "$ifname" hw ether "$vif_mac"
config_set "$vif" macaddr "$vif_mac"
- # Valid values are:
- # wpa / wep / none
- #
# !! ap !!
#
# ALL ap functionality will be passed to hostapd
#
- # !! mesh / adhoc / station !!
- # none -> NO encryption
+ # !! station !!
#
- # wep + keymgmt = '' -> we use iw to connect to the
- # network.
+ # ALL station functionality will be passed to wpa_supplicant
#
- # wep + keymgmt = 'NONE' -> wpa_supplicant will be
- # configured to handle the wep connection
if [ ! "$mode" = "ap" ]; then
# We attempt to set the channel for all interfaces, although
# mac80211 may not support it or the driver might not yet
# for ap mode this is handled by hostapd
[ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
-
- local key keystring
-
- case "$enc" in
- *wep*)
- config_get keymgmt "$vif" keymgmt
- if [ -z "$keymgmt" ]; then
- config_get key "$vif" key
- key="${key:-1}"
- case "$key" in
- [1234])
- for idx in 1 2 3 4; do
- local zidx
- zidx=$(($idx - 1))
- config_get ckey "$vif" "key${idx}"
- if [ -n "$ckey" ]; then
- [ $idx -eq $key ] && zidx="d:${zidx}"
- append keystring "${zidx}:$(prepare_key_wep "$ckey")"
- fi
- done
- ;;
- *)
- keystring="d:0:$(prepare_key_wep "$key")"
- ;;
- esac
- fi
- ;;
- *psk*|*wpa*)
- config_get key "$vif" key
- ;;
- esac
fi
- # txpower is not yet implemented in iw
config_get vif_txpower "$vif" txpower
# use vif_txpower (from wifi-iface) to override txpower (from
# wifi-device) if the latter doesn't exist
txpower="${txpower:-$vif_txpower}"
- [ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}"
-
- config_get frag "$vif" frag
- if [ -n "$frag" ]; then
- iw phy "$phy" set frag "${frag%%.*}"
- fi
-
- config_get rts "$vif" rts
- if [ -n "$rts" ]; then
- iw phy "$phy" set rts "${rts%%.*}"
- fi
-
- ifconfig "$ifname" up
-
- [ "$mode" = "ap" ] || mac80211_start_vif "$vif" "$ifname"
-
- case "$mode" in
- adhoc)
- config_get bssid "$vif" bssid
- iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid
- ;;
- sta|mesh)
- config_get bssid "$vif" bssid
- case "$enc" in
- *wep*)
- if [ -z "$keymgmt" ]; then
- [ -n "$keystring" ] &&
- iw dev "$ifname" connect "$ssid" ${fixed:+$freq} $bssid key $keystring
- else
- if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
- wpa_supplicant_setup_vif "$vif" wext || {
- echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
- # make sure this wifi interface won't accidentally stay open without encryption
- ifconfig "$ifname" down
- continue
- }
- fi
- fi
- ;;
- *wpa*|*psk*)
- config_get key "$vif" key
- if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
- wpa_supplicant_setup_vif "$vif" wext || {
- echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
- # make sure this wifi interface won't accidentally stay open without encryption
- ifconfig "$ifname" down
- continue
- }
- fi
- ;;
- *)
- iw dev "$ifname" connect "$ssid" ${fixed:+$freq} $bssid
- ;;
- esac
-
- ;;
- esac
+ [ -z "$txpower" ] || iw dev "$ifname" set txpower fixed "${txpower%%.*}00"
done
local start_hostapd=
start_hostapd=1
done
- [ -n "$start_hostapd" ] || return 0
-
- hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
- echo "Failed to start hostapd for $phy"
- return
+ [ -n "$start_hostapd" ] && {
+ hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
+ echo "Failed to start hostapd for $phy"
+ return
+ }
+ sleep 2
+
+ for vif in $vifs; do
+ config_get mode "$vif" mode
+ config_get ifname "$vif" ifname
+ [ "$mode" = "ap" ] || continue
+ hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd-$phy/$ifname}"
+ mac80211_start_vif "$vif" "$ifname"
+ done
}
- sleep 2
for vif in $vifs; do
config_get mode "$vif" mode
config_get ifname "$vif" ifname
- [ "$mode" = "ap" ] || continue
- mac80211_start_vif "$vif" "$ifname"
+ [ ! "$mode" = "ap" ] || continue
+ ifconfig "$ifname" up
+
+ if [ ! "$mode" = "ap" ]; then
+ ifconfig "$ifname" up
+ case "$mode" in
+ adhoc)
+ config_get bssid "$vif" bssid
+ config_get ssid "$vif" ssid
+ config_get beacon_int "$device" beacon_int
+ config_get basic_rate_list "$device" basic_rate
+ config_get encryption "$vif" encryption
+ config_get key "$vif" key 1
+ config_get mcast_rate "$vif" mcast_rate
+
+ local keyspec=""
+ [ "$encryption" == "wep" ] && {
+ case "$key" in
+ [1234])
+ local idx
+ for idx in 1 2 3 4; do
+ local ikey
+ config_get ikey "$vif" "key$idx"
+
+ [ -n "$ikey" ] && {
+ ikey="$(($idx - 1)):$(prepare_key_wep "$ikey")"
+ [ $idx -eq $key ] && ikey="d:$ikey"
+ append keyspec "$ikey"
+ }
+ done
+ ;;
+ *) append keyspec "d:0:$(prepare_key_wep "$key")" ;;
+ esac
+ }
+
+ local br brval brsub brstr
+ [ -n "$basic_rate_list" ] && {
+ for br in $basic_rate_list; do
+ brval="$(($br / 1000))"
+ brsub="$((($br / 100) % 10))"
+ [ "$brsub" -gt 0 ] && brval="$brval.$brsub"
+ [ -n "$brstr" ] && brstr="$brstr,"
+ brstr="$brstr$brval"
+ done
+ }
+
+ local mcval=""
+ [ -n "$mcast_rate" ] && {
+ mcval="$(($mcast_rate / 1000))"
+ mcsub="$(( ($mcast_rate / 100) % 10 ))"
+ [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
+ }
+
+ iw dev "$ifname" ibss join "$ssid" $freq \
+ ${fixed:+fixed-freq} $bssid \
+ ${beacon_int:+beacon-interval $beacon_int} \
+ ${brstr:+basic-rates $brstr} \
+ ${mcval:+mcast-rate $mcval} \
+ ${keyspec:+keys $keyspec}
+ ;;
+ sta)
+ if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
+ wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" || {
+ echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
+ # make sure this wifi interface won't accidentally stay open without encryption
+ ifconfig "$ifname" down
+ continue
+ }
+ fi
+ ;;
+ esac
+ mac80211_start_vif "$vif" "$ifname"
+ fi
done
+
}
-check_device() {
+check_mac80211_device() {
config_get phy "$1" phy
[ -z "$phy" ] && {
find_mac80211_phy "$1" >/dev/null || return 0
done
for dev in $(ls /sys/class/ieee80211); do
found=0
- config_foreach check_device wifi-device
+ config_foreach check_mac80211_device wifi-device
[ "$found" -gt 0 ] && continue
mode_11n=""
mode_band="g"
- channel="5"
+ channel="11"
ht_cap=0
for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do
ht_cap="$(($ht_cap | $cap))"
list=" list ht_capab"
[ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list LDPC" "$N"
+ [ "$(($ht_cap & 16))" -eq 16 ] && append ht_capab "$list GF" "$N"
[ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list SHORT-GI-20" "$N"
[ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list SHORT-GI-40" "$N"
+ [ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list TX-STBC" "$N"
+ [ "$(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list RX-STBC1" "$N"
+ [ "$(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list RX-STBC12" "$N"
+ [ "$(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list RX-STBC123" "$N"
[ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list DSSS_CCK-40" "$N"
}
iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; }
projects / openwrt.git / blobdiff