# Load sysconf defaults
[ -f /etc/sysconf ] && . /etc/sysconf
-[ "$(nvram get boardnum)" = "asusX" ] && \
- [ "$(nvram get boardtype)" = "bcm94710dev" ] && {
- asus=1
-}
-
# linksys bug; remove when not using static configuration for lan
NVRAM_lan_proto="static"
+remap () {
+ for type in lan wifi wan pppoe
+ do
+ for s in '' s
+ do
+ eval NVRAM_${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\"
+ done
+ done
+}
+
# hacks for wrt54g 1.x hardware
[ "$(nvram get boardnum)" = "42" ] && \
[ "$(nvram get boardtype)" = "bcm94710dev" ] && {
-
- # remap eth0 => vlan2, eth1 => vlan1
- # for all *_ifname(s)
-
debug "### wrt54g 1.x hack ###"
NVRAM_vlan1hwname="et0"
NVRAM_vlan2hwname="et0"
FAILSAFE_ifnames="vlan1 vlan2 eth2"
+ remap eth0 vlan2
+ remap eth1 vlan1
+}
- remap () {
- eval NVRAM_$1=\"$(nvram get $1 | awk 'gsub("eth0","vlan2") gsub("eth1","vlan1")')\"
- }
-
- for type in lan wifi wan pppoe
- do
- remap ${type}_ifname
- remap ${type}_ifnames
- done
+# hacks for asus wl-500g deluxe
+[ "$(nvram get boardtype)" = "bcm95365r" ] && \
+[ "$(nvram get boardnum)" = "45" ] && {
+ debug "### wl-500g deluxe hacks ###"
+ NVRAM_vlan0hwname="et0"
+ NVRAM_vlan1hwname="et0"
+ FAILSAFE_ifnames="vlan0 vlan1 eth2"
+ remap eth0. vlan
}
# hacks for wap54g hardware
[ "$(nvram get boardnum)" = "00" ] && \
[ "$(nvram get product_name)" = "Product_name" ] && {
debug "### wla2-g54l hacks ###"
- NVRAM_lan_ifnames="vlan0"
NVRAM_wan_ifname="none"
+ NVRAM_lan_ifnames="vlan0"
}
# hack for asus wl-500g hardware
-[ $asus ] && {
- FAILSAFE_lan_ifnames="eth0 eth2"
-}
-
-# hacks for asus wl-500g deluxe
-[ "$(nvram get boardtype)" = "bcm95365r" ] && \
-[ "$(nvram get boardnum)" = "45" ] && {
- debug "### wl-500g deluxe hacks ###"
- NVRAM_vlan0hwname="et0"
- NVRAM_vlan1hwname="et0"
- NVRAM_lan_ifnames="vlan0 eth1"
- [ "$(nvram get wan_ifname)" = "eth0.1" ] && {
- NVRAM_wan_ifname="vlan1"
- }
+[ "$(nvram get boardnum)" = "asusX" ] && \
+[ "$(nvram get boardtype)" = "bcm94710dev" ] && {
+ FAILSAFE_ifnames="eth0 eth2"
}
# defaults if lan_ifname is missing
[ -z "$(nvram get lan_ifname)" ] && {
NVRAM_lan_ifname="br0"
- NVRAM_lan_ifnames=${FAILSAFE_lan_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"}
+ NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"}
}
# defaults if wan_ifname is missing
[ -z "$(nvram get wan_ifname)" ] && {
NVRAM_wan_ifname="vlan1"
NVRAM_wan_proto="dhcp"
- [ "$asus" ] && {
- NVRAM_wan_ifname="eth1"
- }
}
# failsafe if reset is held
[ "$FAILSAFE" = "true" ] && {
echo "### YOU ARE IN FAILSAFE MODE ####"
NVRAM_lan_ifname="br0"
- NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1"}
+ NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"}
NVRAM_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
NVRAM_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
NVRAM_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}