[ar71xx] remove board specific stuff from the generic machine setup
[openwrt.git] / target / linux / generic-2.6 / patches-2.6.23 / 921-gpio_spi_driver.patch
index aa4e6ee..eeb7285 100644 (file)
@@ -1,8 +1,6 @@
-Index: linux-2.6.23.16/drivers/spi/Kconfig
-===================================================================
---- linux-2.6.23.16.orig/drivers/spi/Kconfig
-+++ linux-2.6.23.16/drivers/spi/Kconfig
-@@ -100,6 +100,11 @@ config SPI_BUTTERFLY
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -100,6 +100,11 @@
          inexpensive battery powered microcontroller evaluation board.
          This same cable can be used to flash new firmware.
  
          inexpensive battery powered microcontroller evaluation board.
          This same cable can be used to flash new firmware.
  
@@ -14,11 +12,9 @@ Index: linux-2.6.23.16/drivers/spi/Kconfig
  config SPI_IMX
        tristate "Freescale iMX SPI controller"
        depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
  config SPI_IMX
        tristate "Freescale iMX SPI controller"
        depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-Index: linux-2.6.23.16/drivers/spi/Makefile
-===================================================================
---- linux-2.6.23.16.orig/drivers/spi/Makefile
-+++ linux-2.6.23.16/drivers/spi/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BFIN)                       += spi_bfin5xx.
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -16,6 +16,7 @@
  obj-$(CONFIG_SPI_BITBANG)             += spi_bitbang.o
  obj-$(CONFIG_SPI_AU1550)              += au1550_spi.o
  obj-$(CONFIG_SPI_BUTTERFLY)           += spi_butterfly.o
  obj-$(CONFIG_SPI_BITBANG)             += spi_bitbang.o
  obj-$(CONFIG_SPI_AU1550)              += au1550_spi.o
  obj-$(CONFIG_SPI_BUTTERFLY)           += spi_butterfly.o
This page took 0.02122 seconds and 4 git commands to generate.